tty: moxa: Use more tty_port ops

Rework a few bits of this into tty_port format

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index dd0083bbb64addaea9b286ac8d5a914a474625ea..d8bcbed6d28ddf213ed2d8d87cb4040083a10f01 100644 (file)
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -206,8 +206,9 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
 static void moxa_poll(unsigned long);
 static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
 static void moxa_setup_empty_event(struct tty_struct *);
-static void moxa_shut_down(struct tty_struct *);
+static void moxa_shutdown(struct tty_port *);
 static int moxa_carrier_raised(struct tty_port *);
+static void moxa_dtr_rts(struct tty_port *, int);
 /*
  * moxa board interface functions:
  */
@@ -409,6 +410,8 @@ static const struct tty_operations moxa_ops = {
 
 static const struct tty_port_operations moxa_port_ops = {
        .carrier_raised = moxa_carrier_raised,
+       .dtr_rts = moxa_dtr_rts,
+       .shutdown = moxa_shutdown,
 };
 
 static struct tty_driver *moxaDriver;
@@ -1112,14 +1115,12 @@ static void __exit moxa_exit(void)
 module_init(moxa_init);
 module_exit(moxa_exit);
 
-static void moxa_close_port(struct tty_struct *tty)
+static void moxa_shutdown(struct tty_port *port)
 {
-       struct moxa_port *ch = tty->driver_data;
-       moxa_shut_down(tty);
+       struct moxa_port *ch = container_of(port, struct moxa_port, port);
+        MoxaPortDisable(ch);
        MoxaPortFlushData(ch, 2);
-       ch->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-       tty->driver_data = NULL;
-       tty_port_tty_set(&ch->port, NULL);
+       clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 }
 
 static int moxa_carrier_raised(struct tty_port *port)
@@ -1133,39 +1134,13 @@ static int moxa_carrier_raised(struct tty_port *port)
        return dcd;
 }
 
-static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
-                           struct moxa_port *ch)
+static void moxa_dtr_rts(struct tty_port *port, int onoff)
 {
-       struct tty_port *port = &ch->port;
-       DEFINE_WAIT(wait);
-       int retval = 0;
-       u8 dcd;
-
-       while (1) {
-               prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
-               if (tty_hung_up_p(filp)) {
-#ifdef SERIAL_DO_RESTART
-                       retval = -ERESTARTSYS;
-#else
-                       retval = -EAGAIN;
-#endif
-                       break;
-               }
-               dcd = tty_port_carrier_raised(port);
-               if (dcd)
-                       break;
-
-               if (signal_pending(current)) {
-                       retval = -ERESTARTSYS;
-                       break;
-               }
-               schedule();
-       }
-       finish_wait(&port->open_wait, &wait);
-
-       return retval;
+       struct moxa_port *ch = container_of(port, struct moxa_port, port);
+       MoxaPortLineCtrl(ch, onoff, onoff);
 }
 
+
 static int moxa_open(struct tty_struct *tty, struct file *filp)
 {
        struct moxa_board_conf *brd;
@@ -1194,6 +1169,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
        ch->port.count++;
        tty->driver_data = ch;
        tty_port_tty_set(&ch->port, tty);
+       mutex_lock(&ch->port.mutex);
        if (!(ch->port.flags & ASYNC_INITIALIZED)) {
                ch->statusflags = 0;
                moxa_set_tty_param(tty, tty->termios);
@@ -1202,57 +1178,21 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
                MoxaSetFifo(ch, ch->type == PORT_16550A);
                ch->port.flags |= ASYNC_INITIALIZED;
        }
+       mutex_unlock(&ch->port.mutex);
        mutex_unlock(&moxa_openlock);
 
-       retval = 0;
-       if (!(filp->f_flags & O_NONBLOCK) && !C_CLOCAL(tty))
-               retval = moxa_block_till_ready(tty, filp, ch);
-       mutex_lock(&moxa_openlock);
-       if (retval) {
-               if (ch->port.count) /* 0 means already hung up... */
-                       if (--ch->port.count == 0)
-                               moxa_close_port(tty);
-       } else
-               ch->port.flags |= ASYNC_NORMAL_ACTIVE;
-       mutex_unlock(&moxa_openlock);
-
+       retval = tty_port_block_til_ready(&ch->port, tty, filp);
+       if (retval == 0)
+               set_bit(ASYNCB_NORMAL_ACTIVE, &ch->port.flags);
        return retval;
 }
 
 static void moxa_close(struct tty_struct *tty, struct file *filp)
 {
-       struct moxa_port *ch;
-       int port;
-
-       port = tty->index;
-       if (port == MAX_PORTS || tty_hung_up_p(filp))
-               return;
-
-       mutex_lock(&moxa_openlock);
-       ch = tty->driver_data;
-       if (ch == NULL)
-               goto unlock;
-       if (tty->count == 1 && ch->port.count != 1) {
-               printk(KERN_WARNING "moxa_close: bad serial port count; "
-                       "tty->count is 1, ch->port.count is %d\n", ch->port.count);
-               ch->port.count = 1;
-       }
-       if (--ch->port.count < 0) {
-               printk(KERN_WARNING "moxa_close: bad serial port count, "
-                       "device=%s\n", tty->name);
-               ch->port.count = 0;
-       }
-       if (ch->port.count)
-               goto unlock;
-
+       struct moxa_port *ch = tty->driver_data;
        ch->cflag = tty->termios->c_cflag;
-       if (ch->port.flags & ASYNC_INITIALIZED) {
-               moxa_setup_empty_event(tty);
-               tty_wait_until_sent(tty, 30 * HZ);      /* 30 seconds timeout */
-       }
-
-       moxa_close_port(tty);
-unlock:
+       mutex_lock(&moxa_openlock);
+       tty_port_close(&ch->port, tty, filp);
        mutex_unlock(&moxa_openlock);
 }
 
@@ -1300,14 +1240,6 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)
        struct moxa_port *ch = tty->driver_data;
        int chars;
 
-       /*
-        * Sigh...I have to check if driver_data is NULL here, because
-        * if an open() fails, the TTY subsystem eventually calls
-        * tty_wait_until_sent(), which calls the driver's chars_in_buffer()
-        * routine.  And since the open() failed, we return 0 here.  TDJ
-        */
-       if (ch == NULL)
-               return 0;
        lock_kernel();
        chars = MoxaPortTxQueue(ch);
        if (chars) {
@@ -1436,15 +1368,8 @@ static void moxa_hangup(struct tty_struct *tty)
 
        mutex_lock(&moxa_openlock);
        ch = tty->driver_data;
-       if (ch == NULL) {
-               mutex_unlock(&moxa_openlock);
-               return;
-       }
-       ch->port.count = 0;
-       moxa_close_port(tty);
+       tty_port_hangup(&ch->port);
        mutex_unlock(&moxa_openlock);
-
-       wake_up_interruptible(&ch->port.open_wait);
 }
 
 static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
@@ -1597,26 +1522,6 @@ static void moxa_setup_empty_event(struct tty_struct *tty)
        spin_unlock_bh(&moxa_lock);
 }
 
-static void moxa_shut_down(struct tty_struct *tty)
-{
-       struct moxa_port *ch = tty->driver_data;
-
-       if (!(ch->port.flags & ASYNC_INITIALIZED))
-               return;
-
-       MoxaPortDisable(ch);
-
-       /*
-        * If we're a modem control device and HUPCL is on, drop RTS & DTR.
-        */
-       if (C_HUPCL(tty))
-               MoxaPortLineCtrl(ch, 0, 0);
-
-       spin_lock_bh(&moxa_lock);
-       ch->port.flags &= ~ASYNC_INITIALIZED;
-       spin_unlock_bh(&moxa_lock);
-}
-
 /*****************************************************************************
  *     Driver level functions:                                              *
  *****************************************************************************/