return 0;
state->diseq_flags &= ~(HAS_LOCK);
if (!dst_wait_dst_ready(state, NO_DELAY))
- return 0;
+ return -EIO;
if (state->type_flags & DST_TYPE_HAS_NEWTUNE)
/* how to get variable length reply ???? */
retval = read_dst(state, state->rx_tuna, 10);
retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM);
if (retval < 0) {
dprintk(verbose, DST_DEBUG, 1, "read not successful");
- return 0;
+ return retval;
}
if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
- return 0;
+ return -EIO;
}
} else {
if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[2], 7)) {
dprintk(verbose, DST_INFO, 1, "checksum failure? ");
- return 0;
+ return -EIO;
}
}
if (state->rx_tuna[2] == 0 && state->rx_tuna[3] == 0)
return 0;
-
if (state->dst_type == DST_TYPE_IS_SAT) {
state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 8) + state->rx_tuna[3];
} else {
dst_set_voltage(fe, SEC_VOLTAGE_13);
}
state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE);
-
+ down(&state->dst_mutex);
if ((dst_comm_init(state)) < 0) {
dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed.");
- return -1;
+ goto error;
}
if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9);
if (retval < 0) {
dst_pio_disable(state);
dprintk(verbose, DST_DEBUG, 1, "write not successful");
- return retval;
+ goto werr;
}
if ((dst_pio_disable(state)) < 0) {
dprintk(verbose, DST_DEBUG, 1, "DST PIO disable failed !");
- return -1;
+ goto error;
}
if ((read_dst(state, &reply, GET_ACK) < 0)) {
dprintk(verbose, DST_DEBUG, 1, "read verify not successful.");
- return -1;
+ goto error;
}
if (reply != ACK) {
dprintk(verbose, DST_DEBUG, 1, "write not acknowledged 0x%02x ", reply);
- return 0;
+ goto error;
}
state->diseq_flags |= ATTEMPT_TUNE;
+ retval = dst_get_tuna(state);
+werr:
+ up(&state->dst_mutex);
+ return retval;
- return dst_get_tuna(state);
+error:
+ up(&state->dst_mutex);
+ return -EIO;
}
/*