byte_offset, sff8472_data);
}
-/**
- * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
- * @hw: pointer to hardware structure
- *
- * Determines physical layer capabilities of the current configuration.
- **/
-static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
-{
- u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
- u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
- u16 ext_ability = 0;
-
- hw->phy.ops.identify(hw);
-
- /* Copper PHY must be checked before AUTOC LMS to determine correct
- * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
- switch (hw->phy.type) {
- case ixgbe_phy_tn:
- case ixgbe_phy_cu_unknown:
- hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE,
- MDIO_MMD_PMAPMD, &ext_ability);
- if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
- physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
- goto out;
- default:
- break;
- }
-
- switch (autoc & IXGBE_AUTOC_LMS_MASK) {
- case IXGBE_AUTOC_LMS_1G_AN:
- case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
- if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
- else
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
- break;
- case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
- if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
- else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
- else /* XAUI */
- physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- break;
- case IXGBE_AUTOC_LMS_KX4_AN:
- case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
- if (autoc & IXGBE_AUTOC_KX_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
- if (autoc & IXGBE_AUTOC_KX4_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
- break;
- default:
- break;
- }
-
- if (hw->phy.type == ixgbe_phy_nl) {
- hw->phy.ops.identify_sfp(hw);
-
- switch (hw->phy.sfp_type) {
- case ixgbe_sfp_type_da_cu:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
- break;
- case ixgbe_sfp_type_sr:
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- break;
- case ixgbe_sfp_type_lr:
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- break;
- default:
- physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- break;
- }
- }
-
- switch (hw->device_id) {
- case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
- break;
- case IXGBE_DEV_ID_82598AF_DUAL_PORT:
- case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
- case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- break;
- case IXGBE_DEV_ID_82598EB_XF_LR:
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- break;
- default:
- break;
- }
-
-out:
- return physical_layer;
-}
-
/**
* ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
* port devices.
.start_hw = &ixgbe_start_hw_82598,
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_82598,
- .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
.enable_rx_dma = &ixgbe_enable_rx_dma_generic,
.get_mac_addr = &ixgbe_get_mac_addr_generic,
.stop_adapter = &ixgbe_stop_adapter_generic,
return status;
}
-/**
- * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
- * @hw: pointer to hardware structure
- *
- * Determines physical layer capabilities of the current configuration.
- **/
-static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
-{
- u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
- u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
- u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
- u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
- u16 ext_ability = 0;
- u8 comp_codes_10g = 0;
- u8 comp_codes_1g = 0;
-
- hw->phy.ops.identify(hw);
-
- switch (hw->phy.type) {
- case ixgbe_phy_tn:
- case ixgbe_phy_cu_unknown:
- hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
- &ext_ability);
- if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
- physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
- goto out;
- default:
- break;
- }
-
- switch (autoc & IXGBE_AUTOC_LMS_MASK) {
- case IXGBE_AUTOC_LMS_1G_AN:
- case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
- if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
- IXGBE_PHYSICAL_LAYER_1000BASE_BX;
- goto out;
- } else
- /* SFI mode so read SFP module */
- goto sfp_check;
- break;
- case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
- if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
- else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
- else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
- goto out;
- case IXGBE_AUTOC_LMS_10G_SERIAL:
- if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
- goto out;
- } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
- goto sfp_check;
- break;
- case IXGBE_AUTOC_LMS_KX4_KX_KR:
- case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
- if (autoc & IXGBE_AUTOC_KX_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
- if (autoc & IXGBE_AUTOC_KX4_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
- if (autoc & IXGBE_AUTOC_KR_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
- goto out;
- default:
- goto out;
- }
-
-sfp_check:
- /* SFP check must be done last since DA modules are sometimes used to
- * test KR mode - we need to id KR mode correctly before SFP module.
- * Call identify_sfp because the pluggable module may have changed */
- hw->phy.ops.identify_sfp(hw);
- if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
- goto out;
-
- switch (hw->phy.type) {
- case ixgbe_phy_sfp_passive_tyco:
- case ixgbe_phy_sfp_passive_unknown:
- case ixgbe_phy_qsfp_passive_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
- break;
- case ixgbe_phy_sfp_ftl_active:
- case ixgbe_phy_sfp_active_unknown:
- case ixgbe_phy_qsfp_active_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
- break;
- case ixgbe_phy_sfp_avago:
- case ixgbe_phy_sfp_ftl:
- case ixgbe_phy_sfp_intel:
- case ixgbe_phy_sfp_unknown:
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
- if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
- break;
- case ixgbe_phy_qsfp_intel:
- case ixgbe_phy_qsfp_unknown:
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
- if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- break;
- default:
- break;
- }
-
-out:
- return physical_layer;
-}
-
/**
* ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
* @hw: pointer to hardware structure
.start_hw = &ixgbe_start_hw_82599,
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_82599,
- .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
.enable_rx_dma = &ixgbe_enable_rx_dma_82599,
.disable_rx_buff = &ixgbe_disable_rx_buff_generic,
.enable_rx_buff = &ixgbe_enable_rx_buff_generic,
IXGBE_LINK_SPEED_1GB_FULL | \
IXGBE_LINK_SPEED_10GB_FULL)
-
-/* Physical layer type */
-typedef u32 ixgbe_physical_layer;
-#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0
-#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001
-#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002
-#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x0004
-#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008
-#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010
-#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020
-#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x0040
-#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x0080
-#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100
-#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200
-#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400
-#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800
-#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
-#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
-
/* Flow Control Data Sheet defined values
* Calculation and defines taken from 802.1bb Annex O
*/
s32 (*start_hw)(struct ixgbe_hw *);
s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
- u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
return ret_val;
}
-/**
- * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
- * @hw: pointer to hardware structure
- *
- * Determines physical layer capabilities of the current configuration.
- **/
-static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
-{
- u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- u16 ext_ability = 0;
-
- hw->phy.ops.identify(hw);
-
- hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
- &ext_ability);
- if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
- physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
-
- return physical_layer;
-}
-
/**
* ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
* @hw: pointer to hardware structure
.start_hw = &ixgbe_start_hw_X540,
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_X540,
- .get_supported_physical_layer =
- &ixgbe_get_supported_physical_layer_X540,
.enable_rx_dma = &ixgbe_enable_rx_dma_generic,
.get_mac_addr = &ixgbe_get_mac_addr_generic,
.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff