arcnet: com90io: Use arcnet_<I/O> routines

Simplify and make consistent the current uses of inb/outb
by using the newly introduced arcnet_<I/O> equivalents.

o Add new #defines for register offsets
o Remove old #defines that included the ioaddr
o Remove obfuscating macros by expanding them in-place where appropriate

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>

diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c
index ce15d191104835d25c4b2b23706b8d6fcda7e8a4..7e084f148fa0933116dc6ae4d9a522480a02c756 100644 (file)
--- a/drivers/net/arcnet/com90io.c
+++ b/drivers/net/arcnet/com90io.c
@@ -59,23 +59,14 @@ static void com90io_copy_from_card(struct net_device *dev, int bufnum,
 #define ARCNET_TOTAL_SIZE 16
 
 /* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK       (ioaddr + 0)    /* writable */
-#define _STATUS                (ioaddr + 0)    /* readable */
-#define _COMMAND       (ioaddr + 1)    /* writable, returns random vals on read (?) */
-#define _RESET         (ioaddr + 8)    /* software reset (on read) */
-#define _MEMDATA       (ioaddr + 12)   /* Data port for IO-mapped memory */
-#define _ADDR_HI       (ioaddr + 15)   /* Control registers for said */
-#define _ADDR_LO       (ioaddr + 14)
-#define _CONFIG                (ioaddr + 2)    /* Configuration register */
-
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ASTATUS()      inb(_STATUS)
-#define ACOMMAND(cmd)  outb((cmd), _COMMAND)
-#define AINTMASK(msk)  outb((msk), _INTMASK)
-#define SETCONF()      outb((lp->config), _CONFIG)
+#define COM9026_REG_W_INTMASK  0       /* writable */
+#define COM9026_REG_R_STATUS   0       /* readable */
+#define COM9026_REG_W_COMMAND  1       /* writable, returns random vals on read (?) */
+#define COM9026_REG_RW_CONFIG  2       /* Configuration register */
+#define COM9026_REG_R_RESET    8       /* software reset (on read) */
+#define COM9026_REG_RW_MEMDATA 12      /* Data port for IO-mapped memory */
+#define COM9026_REG_W_ADDR_LO  14      /* Control registers for said */
+#define COM9026_REG_W_ADDR_HI  15
 
 /****************************************************************************
  *                                                                          *
@@ -90,10 +81,10 @@ static u_char get_buffer_byte(struct net_device *dev, unsigned offset)
 {
        int ioaddr = dev->base_addr;
 
-       outb(offset >> 8, _ADDR_HI);
-       outb(offset & 0xff, _ADDR_LO);
+       arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
+       arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
 
-       return inb(_MEMDATA);
+       return arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
 }
 
 #ifdef ONE_AT_A_TIME_TX
@@ -102,10 +93,10 @@ static void put_buffer_byte(struct net_device *dev, unsigned offset,
 {
        int ioaddr = dev->base_addr;
 
-       outb(offset >> 8, _ADDR_HI);
-       outb(offset & 0xff, _ADDR_LO);
+       arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
+       arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
 
-       outb(datum, _MEMDATA);
+       arcnet_outb(datum, ioaddr, COM9026_REG_RW_MEMDATA);
 }
 
 #endif
@@ -115,14 +106,14 @@ static void get_whole_buffer(struct net_device *dev, unsigned offset,
 {
        int ioaddr = dev->base_addr;
 
-       outb((offset >> 8) | AUTOINCflag, _ADDR_HI);
-       outb(offset & 0xff, _ADDR_LO);
+       arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
+       arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
 
        while (length--)
 #ifdef ONE_AT_A_TIME_RX
                *(dest++) = get_buffer_byte(dev, offset++);
 #else
-               *(dest++) = inb(_MEMDATA);
+               *(dest++) = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
 #endif
 }
 
@@ -131,14 +122,14 @@ static void put_whole_buffer(struct net_device *dev, unsigned offset,
 {
        int ioaddr = dev->base_addr;
 
-       outb((offset >> 8) | AUTOINCflag, _ADDR_HI);
-       outb(offset & 0xff, _ADDR_LO);
+       arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
+       arcnet_outb(offset & 0xff, ioaddr,COM9026_REG_W_ADDR_LO);
 
        while (length--)
 #ifdef ONE_AT_A_TIME_TX
                put_buffer_byte(dev, offset++, *(dest++));
 #else
-               outb(*(dest++), _MEMDATA);
+               arcnet_outb(*(dest++), ioaddr, COM9026_REG_RW_MEMDATA);
 #endif
 }
 
@@ -164,15 +155,15 @@ static int __init com90io_probe(struct net_device *dev)
                           ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
                return -ENXIO;
        }
-       if (ASTATUS() == 0xFF) {
+       if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) {
                arc_printk(D_INIT_REASONS, dev, "IO address %x empty\n",
                           ioaddr);
                goto err_out;
        }
-       inb(_RESET);
+       arcnet_inb(ioaddr, COM9026_REG_R_RESET);
        mdelay(RESETtime);
 
-       status = ASTATUS();
+       status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 
        if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
                arc_printk(D_INIT_REASONS, dev, "Status invalid (%Xh)\n",
@@ -181,26 +172,28 @@ static int __init com90io_probe(struct net_device *dev)
        }
        arc_printk(D_INIT_REASONS, dev, "Status after reset: %X\n", status);
 
-       ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
+       arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+                   ioaddr, COM9026_REG_W_COMMAND);
 
        arc_printk(D_INIT_REASONS, dev, "Status after reset acknowledged: %X\n",
                   status);
 
-       status = ASTATUS();
+       status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 
        if (status & RESETflag) {
                arc_printk(D_INIT_REASONS, dev, "Eternal reset (status=%Xh)\n",
                           status);
                goto err_out;
        }
-       outb((0x16 | IOMAPflag) & ~ENABLE16flag, _CONFIG);
+       arcnet_outb((0x16 | IOMAPflag) & ~ENABLE16flag,
+                   ioaddr, COM9026_REG_RW_CONFIG);
 
        /* Read first loc'n of memory */
 
-       outb(AUTOINCflag, _ADDR_HI);
-       outb(0, _ADDR_LO);
+       arcnet_outb(AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
+       arcnet_outb(0, ioaddr,  COM9026_REG_W_ADDR_LO);
 
-       status = inb(_MEMDATA);
+       status = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
        if (status != 0xd1) {
                arc_printk(D_INIT_REASONS, dev, "Signature byte not found (%Xh instead).\n",
                           status);
@@ -213,9 +206,9 @@ static int __init com90io_probe(struct net_device *dev)
                 */
 
                airqmask = probe_irq_on();
-               outb(NORXflag, _INTMASK);
+               arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK);
                udelay(1);
-               outb(0, _INTMASK);
+               arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK);
                dev->irq = probe_irq_off(airqmask);
 
                if ((int)dev->irq <= 0) {
@@ -264,7 +257,7 @@ static int __init com90io_found(struct net_device *dev)
        lp->hw.copy_from_card = com90io_copy_from_card;
 
        lp->config = (0x16 | IOMAPflag) & ~ENABLE16flag;
-       SETCONF();
+       arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
 
        /* get and check the station ID from offset 1 in shmem */
 
@@ -272,7 +265,8 @@ static int __init com90io_found(struct net_device *dev)
 
        err = register_netdev(dev);
        if (err) {
-               outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG);
+               arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
+                           ioaddr, COM9026_REG_RW_CONFIG);
                free_irq(dev->irq, dev);
                release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
                return err;
@@ -297,19 +291,20 @@ static int com90io_reset(struct net_device *dev, int really_reset)
        short ioaddr = dev->base_addr;
 
        arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
-                  dev->name, ASTATUS());
+                  dev->name, arcnet_inb(ioaddr, COM9026_REG_R_STATUS));
 
        if (really_reset) {
                /* reset the card */
-               inb(_RESET);
+               arcnet_inb(ioaddr, COM9026_REG_R_RESET);
                mdelay(RESETtime);
        }
        /* Set the thing to IO-mapped, 8-bit  mode */
        lp->config = (0x1C | IOMAPflag) & ~ENABLE16flag;
-       SETCONF();
+       arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
 
-       ACOMMAND(CFLAGScmd | RESETclear);       /* clear flags & end reset */
-       ACOMMAND(CFLAGScmd | CONFIGclear);
+       arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
+                                       /* clear flags & end reset */
+       arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
 
        /* verify that the ARCnet signature byte is present */
        if (get_buffer_byte(dev, 0) != TESTvalue) {
@@ -317,8 +312,7 @@ static int com90io_reset(struct net_device *dev, int really_reset)
                return 1;
        }
        /* enable extended (512-byte) packets */
-       ACOMMAND(CONFIGcmd | EXTconf);
-
+       arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
        /* done!  return success. */
        return 0;
 }
@@ -327,21 +321,21 @@ static void com90io_command(struct net_device *dev, int cmd)
 {
        short ioaddr = dev->base_addr;
 
-       ACOMMAND(cmd);
+       arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND);
 }
 
 static int com90io_status(struct net_device *dev)
 {
        short ioaddr = dev->base_addr;
 
-       return ASTATUS();
+       return arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 }
 
 static void com90io_setmask(struct net_device *dev, int mask)
 {
        short ioaddr = dev->base_addr;
 
-       AINTMASK(mask);
+       arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK);
 }
 
 static void com90io_copy_to_card(struct net_device *dev, int bufnum,
@@ -427,7 +421,8 @@ static void __exit com90io_exit(void)
        /* In case the old driver is loaded later,
         * set the thing back to MMAP mode
         */
-       outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG);
+       arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
+                   ioaddr, COM9026_REG_RW_CONFIG);
 
        free_irq(dev->irq, dev);
        release_region(dev->base_addr, ARCNET_TOTAL_SIZE);