brcmfmac: remove obsolete i-scan and clean up related code.
authorHante Meuleman <meuleman@broadcom.com>
Tue, 6 Nov 2012 00:22:13 +0000 (16:22 -0800)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 14 Nov 2012 19:55:45 +0000 (14:55 -0500)
e-scan has become the default scanning method. This patch removes
the i-scan related code and cleans up e-scan related code to be
always enabled.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/brcm80211/Kconfig
drivers/net/wireless/brcm80211/brcmfmac/dhd.h
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h

index c9d811eb6556bfa4494155391398c2bb2b1df815..b480088b3dbe2e0834a28228341a66a74c79bee0 100644 (file)
@@ -55,14 +55,6 @@ config BRCMFMAC_USB
          IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
          use the driver for an USB wireless card.
 
-config BRCMISCAN
-       bool "Broadcom I-Scan (OBSOLETE)"
-       depends on BRCMFMAC
-       ---help---
-         This option enables the I-Scan method. By default fullmac uses the
-         new E-Scan method which uses less memory in firmware and gives no
-         limitation on the number of scan results.
-
 config BRCMDBG
        bool "Broadcom driver debug functions"
        depends on BRCMSMAC || BRCMFMAC
index 8704daa2758fc90919157e91313d03a1bc722d6f..34bad32d2a74e6e5fdb907cf242ca70ed58dcd08 100644 (file)
 #define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
 #define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
 
-#define BRCMF_SCAN_ACTION_START      1
-#define BRCMF_SCAN_ACTION_CONTINUE   2
-#define WL_SCAN_ACTION_ABORT      3
-
-#define BRCMF_ISCAN_REQ_VERSION 1
-
-/* brcmf_iscan_results status values */
-#define BRCMF_SCAN_RESULTS_SUCCESS     0
-#define BRCMF_SCAN_RESULTS_PARTIAL     1
-#define BRCMF_SCAN_RESULTS_PENDING     2
-#define BRCMF_SCAN_RESULTS_ABORTED     3
-#define BRCMF_SCAN_RESULTS_NO_MEM      4
-
 /* Indicates this key is using soft encrypt */
 #define WL_SOFT_KEY    (1 << 0)
 /* primary (ie tx) key */
@@ -452,14 +439,6 @@ struct brcmf_scan_params_le {
        __le16 channel_list[1]; /* list of chanspecs */
 };
 
-/* incremental scan struct */
-struct brcmf_iscan_params_le {
-       __le32 version;
-       __le16 action;
-       __le16 scan_duration;
-       struct brcmf_scan_params_le params_le;
-};
-
 struct brcmf_scan_results {
        u32 buflen;
        u32 version;
@@ -467,12 +446,6 @@ struct brcmf_scan_results {
        struct brcmf_bss_info_le bss_info_le[];
 };
 
-struct brcmf_scan_results_le {
-       __le32 buflen;
-       __le32 version;
-       __le32 count;
-};
-
 struct brcmf_escan_params_le {
        __le32 version;
        __le16 action;
@@ -508,23 +481,6 @@ struct brcmf_join_params {
        struct brcmf_assoc_params_le params_le;
 };
 
-/* incremental scan results struct */
-struct brcmf_iscan_results {
-       union {
-               u32 status;
-               __le32 status_le;
-       };
-       union {
-               struct brcmf_scan_results results;
-               struct brcmf_scan_results_le results_le;
-       };
-};
-
-/* size of brcmf_iscan_results not including variable length array */
-#define BRCMF_ISCAN_RESULTS_FIXED_SIZE \
-       (sizeof(struct brcmf_scan_results) + \
-        offsetof(struct brcmf_iscan_results, results))
-
 struct brcmf_wsec_key {
        u32 index;              /* key index */
        u32 len;                /* key length */
index eefa6c2560cc87f9f917ffcc95711b9d5a7b6e87..55a47382981d21ae6a5131694e0194b0b8987af5 100644 (file)
 #define BRCMF_HDRS_VAL 0x0040
 #define BRCMF_BYTES_VAL        0x0080
 #define BRCMF_INTR_VAL 0x0100
-#define BRCMF_GLOM_VAL 0x0400
-#define BRCMF_EVENT_VAL        0x0800
-#define BRCMF_BTA_VAL  0x1000
-#define BRCMF_ISCAN_VAL 0x2000
-#define BRCMF_FIL_VAL  0x4000
+#define BRCMF_GLOM_VAL 0x0200
+#define BRCMF_EVENT_VAL        0x0400
+#define BRCMF_BTA_VAL  0x0800
+#define BRCMF_FIL_VAL  0x1000
 
 #if defined(DEBUG)
 
index 94da6c9794b6cc29275303bf650f5ae742565cc6..0970c1a54e4c60cb8a2113e6843d7dfeea184c56 100644 (file)
@@ -522,185 +522,6 @@ static void brcmf_set_mpc(struct net_device *ndev, int mpc)
        }
 }
 
-static void brcmf_iscan_prep(struct brcmf_scan_params_le *params_le,
-                            struct brcmf_ssid *ssid)
-{
-       memset(params_le->bssid, 0xFF, ETH_ALEN);
-       params_le->bss_type = DOT11_BSSTYPE_ANY;
-       params_le->scan_type = 0;
-       params_le->channel_num = 0;
-       params_le->nprobes = cpu_to_le32(-1);
-       params_le->active_time = cpu_to_le32(-1);
-       params_le->passive_time = cpu_to_le32(-1);
-       params_le->home_time = cpu_to_le32(-1);
-       if (ssid && ssid->SSID_len) {
-               params_le->ssid_le.SSID_len = cpu_to_le32(ssid->SSID_len);
-               memcpy(&params_le->ssid_le.SSID, ssid->SSID, ssid->SSID_len);
-       }
-}
-
-static s32
-brcmf_run_iscan(struct brcmf_cfg80211_iscan_ctrl *iscan,
-               struct brcmf_ssid *ssid, u16 action)
-{
-       s32 params_size = BRCMF_SCAN_PARAMS_FIXED_SIZE +
-                         offsetof(struct brcmf_iscan_params_le, params_le);
-       struct brcmf_iscan_params_le *params;
-       s32 err = 0;
-
-       if (ssid && ssid->SSID_len)
-               params_size += sizeof(struct brcmf_ssid);
-       params = kzalloc(params_size, GFP_KERNEL);
-       if (!params)
-               return -ENOMEM;
-       BUG_ON(params_size >= BRCMF_DCMD_SMLEN);
-
-       brcmf_iscan_prep(&params->params_le, ssid);
-
-       params->version = cpu_to_le32(BRCMF_ISCAN_REQ_VERSION);
-       params->action = cpu_to_le16(action);
-       params->scan_duration = cpu_to_le16(0);
-
-       err = brcmf_fil_iovar_data_set(netdev_priv(iscan->ndev), "iscan",
-                                      params, params_size);
-       if (err) {
-               if (err == -EBUSY)
-                       WL_INFO("system busy : iscan canceled\n");
-               else
-                       WL_ERR("error (%d)\n", err);
-       }
-
-       kfree(params);
-       return err;
-}
-
-static s32 brcmf_do_iscan(struct brcmf_cfg80211_info *cfg)
-{
-       struct brcmf_cfg80211_iscan_ctrl *iscan = cfg_to_iscan(cfg);
-       struct net_device *ndev = cfg_to_ndev(cfg);
-       struct brcmf_ssid ssid;
-       u32 passive_scan;
-       s32 err = 0;
-
-       /* Broadcast scan by default */
-       memset(&ssid, 0, sizeof(ssid));
-
-       iscan->state = WL_ISCAN_STATE_SCANING;
-
-       passive_scan = cfg->active_scan ? 0 : 1;
-       err = brcmf_fil_cmd_int_set(netdev_priv(ndev),
-                                   BRCMF_C_SET_PASSIVE_SCAN, passive_scan);
-       if (err) {
-               WL_ERR("error (%d)\n", err);
-               return err;
-       }
-       brcmf_set_mpc(ndev, 0);
-       cfg->iscan_kickstart = true;
-       err = brcmf_run_iscan(iscan, &ssid, BRCMF_SCAN_ACTION_START);
-       if (err) {
-               brcmf_set_mpc(ndev, 1);
-               cfg->iscan_kickstart = false;
-               return err;
-       }
-       mod_timer(&iscan->timer, jiffies + iscan->timer_ms * HZ / 1000);
-       iscan->timer_on = 1;
-       return err;
-}
-
-static s32
-brcmf_cfg80211_iscan(struct wiphy *wiphy, struct net_device *ndev,
-                    struct cfg80211_scan_request *request,
-                    struct cfg80211_ssid *this_ssid)
-{
-       struct brcmf_if *ifp = netdev_priv(ndev);
-       struct brcmf_cfg80211_info *cfg = ndev_to_cfg(ndev);
-       struct cfg80211_ssid *ssids;
-       struct brcmf_cfg80211_scan_req *sr = cfg->scan_req_int;
-       u32 passive_scan;
-       bool iscan_req;
-       bool spec_scan;
-       s32 err = 0;
-       u32 SSID_len;
-
-       if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
-               WL_ERR("Scanning already: status (%lu)\n", cfg->scan_status);
-               return -EAGAIN;
-       }
-       if (test_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status)) {
-               WL_ERR("Scanning being aborted: status (%lu)\n",
-                      cfg->scan_status);
-               return -EAGAIN;
-       }
-       if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state)) {
-               WL_ERR("Connecting: status (%lu)\n", ifp->vif->sme_state);
-               return -EAGAIN;
-       }
-
-       iscan_req = false;
-       spec_scan = false;
-       if (request) {
-               /* scan bss */
-               ssids = request->ssids;
-               if (cfg->iscan_on && (!ssids || !ssids->ssid_len))
-                       iscan_req = true;
-       } else {
-               /* scan in ibss */
-               /* we don't do iscan in ibss */
-               ssids = this_ssid;
-       }
-
-       cfg->scan_request = request;
-       set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
-       if (iscan_req) {
-               err = brcmf_do_iscan(cfg);
-               if (!err)
-                       return err;
-               else
-                       goto scan_out;
-       } else {
-               WL_SCAN("ssid \"%s\", ssid_len (%d)\n",
-                      ssids->ssid, ssids->ssid_len);
-               memset(&sr->ssid_le, 0, sizeof(sr->ssid_le));
-               SSID_len = min_t(u8, sizeof(sr->ssid_le.SSID), ssids->ssid_len);
-               sr->ssid_le.SSID_len = cpu_to_le32(0);
-               if (SSID_len) {
-                       memcpy(sr->ssid_le.SSID, ssids->ssid, SSID_len);
-                       sr->ssid_le.SSID_len = cpu_to_le32(SSID_len);
-                       spec_scan = true;
-               } else {
-                       WL_SCAN("Broadcast scan\n");
-               }
-
-               passive_scan = cfg->active_scan ? 0 : 1;
-               err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PASSIVE_SCAN,
-                                           passive_scan);
-               if (err) {
-                       WL_ERR("WLC_SET_PASSIVE_SCAN error (%d)\n", err);
-                       goto scan_out;
-               }
-               brcmf_set_mpc(ndev, 0);
-               err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN,
-                                            &sr->ssid_le, sizeof(sr->ssid_le));
-               if (err) {
-                       if (err == -EBUSY)
-                               WL_INFO("system busy : scan for \"%s\" "
-                                       "canceled\n", sr->ssid_le.SSID);
-                       else
-                               WL_ERR("WLC_SCAN error (%d)\n", err);
-
-                       brcmf_set_mpc(ndev, 1);
-                       goto scan_out;
-               }
-       }
-
-       return 0;
-
-scan_out:
-       clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
-       cfg->scan_request = NULL;
-       return err;
-}
-
 static void brcmf_escan_prep(struct brcmf_scan_params_le *params_le,
                             struct cfg80211_scan_request *request)
 {
@@ -924,7 +745,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev,
        struct brcmf_if *ifp = netdev_priv(ndev);
        struct brcmf_cfg80211_info *cfg = ndev_to_cfg(ndev);
        struct cfg80211_ssid *ssids;
-       struct brcmf_cfg80211_scan_req *sr = cfg->scan_req_int;
+       struct brcmf_cfg80211_scan_req *sr = &cfg->scan_req_int;
        u32 passive_scan;
        bool escan_req;
        bool spec_scan;
@@ -1018,7 +839,6 @@ static s32
 brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
 {
        struct net_device *ndev = request->wdev->netdev;
-       struct brcmf_cfg80211_info *cfg = ndev_to_cfg(ndev);
        s32 err = 0;
 
        WL_TRACE("Enter\n");
@@ -1027,10 +847,7 @@ brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
                                       struct brcmf_cfg80211_vif, wdev)))
                return -EIO;
 
-       if (cfg->iscan_on)
-               err = brcmf_cfg80211_iscan(wiphy, ndev, request, NULL);
-       else if (cfg->escan_on)
-               err = brcmf_cfg80211_escan(wiphy, ndev, request, NULL);
+       err = brcmf_cfg80211_escan(wiphy, ndev, request, NULL);
 
        if (err)
                WL_ERR("scan error (%d)\n", err);
@@ -2352,7 +2169,7 @@ static s32 brcmf_inform_bss(struct brcmf_cfg80211_info *cfg)
                return -EOPNOTSUPP;
        }
        WL_SCAN("scanned AP count (%d)\n", bss_list->count);
-       for (i = 0; i < bss_list->count && i < WL_AP_MAX; i++) {
+       for (i = 0; i < bss_list->count; i++) {
                bi = next_bss_le(bss_list, bi);
                err = brcmf_inform_single_bss(cfg, bi);
                if (err)
@@ -2574,33 +2391,10 @@ update_bss_info_out:
 
 static void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg)
 {
-       struct brcmf_cfg80211_iscan_ctrl *iscan = cfg_to_iscan(cfg);
        struct escan_info *escan = &cfg->escan_info;
-       struct brcmf_ssid ssid;
 
        set_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status);
-       if (cfg->iscan_on) {
-               iscan->state = WL_ISCAN_STATE_IDLE;
-
-               if (iscan->timer_on) {
-                       del_timer_sync(&iscan->timer);
-                       iscan->timer_on = 0;
-               }
-
-               cancel_work_sync(&iscan->work);
-
-               /* Abort iscan running in FW */
-               memset(&ssid, 0, sizeof(ssid));
-               brcmf_run_iscan(iscan, &ssid, WL_SCAN_ACTION_ABORT);
-
-               if (cfg->scan_request) {
-                       /* Indidate scan abort to cfg80211 layer */
-                       WL_INFO("Terminating scan in progress\n");
-                       cfg80211_scan_done(cfg->scan_request, true);
-                       cfg->scan_request = NULL;
-               }
-       }
-       if (cfg->escan_on && cfg->scan_request) {
+       if (cfg->scan_request) {
                escan->escan_state = WL_ESCAN_STATE_IDLE;
                brcmf_notify_escan_complete(cfg, escan->ndev, true, true);
        }
@@ -2608,198 +2402,6 @@ static void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg)
        clear_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status);
 }
 
-static void brcmf_notify_iscan_complete(struct brcmf_cfg80211_iscan_ctrl *iscan,
-                                       bool aborted)
-{
-       struct brcmf_cfg80211_info *cfg = iscan_to_cfg(iscan);
-       struct net_device *ndev = cfg_to_ndev(cfg);
-
-       if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
-               WL_ERR("Scan complete while device not scanning\n");
-               return;
-       }
-       if (cfg->scan_request) {
-               WL_SCAN("ISCAN Completed scan: %s\n",
-                               aborted ? "Aborted" : "Done");
-               cfg80211_scan_done(cfg->scan_request, aborted);
-               brcmf_set_mpc(ndev, 1);
-               cfg->scan_request = NULL;
-       }
-       cfg->iscan_kickstart = false;
-}
-
-static s32 brcmf_wakeup_iscan(struct brcmf_cfg80211_iscan_ctrl *iscan)
-{
-       if (iscan->state != WL_ISCAN_STATE_IDLE) {
-               WL_SCAN("wake up iscan\n");
-               schedule_work(&iscan->work);
-               return 0;
-       }
-
-       return -EIO;
-}
-
-static s32
-brcmf_get_iscan_results(struct brcmf_cfg80211_iscan_ctrl *iscan, u32 *status,
-                    struct brcmf_scan_results **bss_list)
-{
-       struct brcmf_scan_results *results;
-       struct brcmf_scan_results_le *results_le;
-       struct brcmf_iscan_results *list_buf;
-       s32 err = 0;
-
-       memset(iscan->scan_buf, 0, WL_ISCAN_BUF_MAX);
-       list_buf = (struct brcmf_iscan_results *)iscan->scan_buf;
-       results = &list_buf->results;
-       results_le = &list_buf->results_le;
-       results_le->buflen = cpu_to_le32(sizeof(iscan->scan_buf));
-       results_le->version = 0;
-       results_le->count = 0;
-
-       err = brcmf_fil_iovar_data_get(netdev_priv(iscan->ndev), "iscanresults",
-                                      iscan->scan_buf,
-                                      sizeof(iscan->scan_buf));
-       if (err) {
-               WL_ERR("error (%d)\n", err);
-               return err;
-       }
-       results->buflen = le32_to_cpu(results_le->buflen);
-       results->version = le32_to_cpu(results_le->version);
-       results->count = le32_to_cpu(results_le->count);
-       WL_SCAN("results->count = %d\n", results_le->count);
-       WL_SCAN("results->buflen = %d\n", results_le->buflen);
-       *status = le32_to_cpu(list_buf->status_le);
-       WL_SCAN("status = %d\n", *status);
-       *bss_list = results;
-
-       return err;
-}
-
-static s32 brcmf_iscan_done(struct brcmf_cfg80211_info *cfg)
-{
-       struct brcmf_cfg80211_iscan_ctrl *iscan = cfg->iscan;
-       s32 err = 0;
-
-       iscan->state = WL_ISCAN_STATE_IDLE;
-       brcmf_inform_bss(cfg);
-       brcmf_notify_iscan_complete(iscan, false);
-
-       return err;
-}
-
-static s32 brcmf_iscan_pending(struct brcmf_cfg80211_info *cfg)
-{
-       struct brcmf_cfg80211_iscan_ctrl *iscan = cfg->iscan;
-       s32 err = 0;
-
-       /* Reschedule the timer */
-       mod_timer(&iscan->timer, jiffies + iscan->timer_ms * HZ / 1000);
-       iscan->timer_on = 1;
-
-       return err;
-}
-
-static s32 brcmf_iscan_inprogress(struct brcmf_cfg80211_info *cfg)
-{
-       struct brcmf_cfg80211_iscan_ctrl *iscan = cfg->iscan;
-       s32 err = 0;
-
-       brcmf_inform_bss(cfg);
-       brcmf_run_iscan(iscan, NULL, BRCMF_SCAN_ACTION_CONTINUE);
-       /* Reschedule the timer */
-       mod_timer(&iscan->timer, jiffies + iscan->timer_ms * HZ / 1000);
-       iscan->timer_on = 1;
-
-       return err;
-}
-
-static s32 brcmf_iscan_aborted(struct brcmf_cfg80211_info *cfg)
-{
-       struct brcmf_cfg80211_iscan_ctrl *iscan = cfg->iscan;
-       s32 err = 0;
-
-       iscan->state = WL_ISCAN_STATE_IDLE;
-       brcmf_notify_iscan_complete(iscan, true);
-
-       return err;
-}
-
-static void brcmf_cfg80211_iscan_handler(struct work_struct *work)
-{
-       struct brcmf_cfg80211_iscan_ctrl *iscan =
-                       container_of(work, struct brcmf_cfg80211_iscan_ctrl,
-                                    work);
-       struct brcmf_cfg80211_info *cfg = iscan_to_cfg(iscan);
-       struct brcmf_cfg80211_iscan_eloop *el = &iscan->el;
-       u32 status = BRCMF_SCAN_RESULTS_PARTIAL;
-
-       if (iscan->timer_on) {
-               del_timer_sync(&iscan->timer);
-               iscan->timer_on = 0;
-       }
-
-       if (brcmf_get_iscan_results(iscan, &status, &cfg->bss_list)) {
-               status = BRCMF_SCAN_RESULTS_ABORTED;
-               WL_ERR("Abort iscan\n");
-       }
-
-       el->handler[status](cfg);
-}
-
-static void brcmf_iscan_timer(unsigned long data)
-{
-       struct brcmf_cfg80211_iscan_ctrl *iscan =
-                       (struct brcmf_cfg80211_iscan_ctrl *)data;
-
-       if (iscan) {
-               iscan->timer_on = 0;
-               WL_SCAN("timer expired\n");
-               brcmf_wakeup_iscan(iscan);
-       }
-}
-
-static s32 brcmf_invoke_iscan(struct brcmf_cfg80211_info *cfg)
-{
-       struct brcmf_cfg80211_iscan_ctrl *iscan = cfg_to_iscan(cfg);
-
-       if (cfg->iscan_on) {
-               iscan->state = WL_ISCAN_STATE_IDLE;
-               INIT_WORK(&iscan->work, brcmf_cfg80211_iscan_handler);
-       }
-
-       return 0;
-}
-
-static void brcmf_init_iscan_eloop(struct brcmf_cfg80211_iscan_eloop *el)
-{
-       memset(el, 0, sizeof(*el));
-       el->handler[BRCMF_SCAN_RESULTS_SUCCESS] = brcmf_iscan_done;
-       el->handler[BRCMF_SCAN_RESULTS_PARTIAL] = brcmf_iscan_inprogress;
-       el->handler[BRCMF_SCAN_RESULTS_PENDING] = brcmf_iscan_pending;
-       el->handler[BRCMF_SCAN_RESULTS_ABORTED] = brcmf_iscan_aborted;
-       el->handler[BRCMF_SCAN_RESULTS_NO_MEM] = brcmf_iscan_aborted;
-}
-
-static s32 brcmf_init_iscan(struct brcmf_cfg80211_info *cfg)
-{
-       struct brcmf_cfg80211_iscan_ctrl *iscan = cfg_to_iscan(cfg);
-       int err = 0;
-
-       if (cfg->iscan_on) {
-               iscan->ndev = cfg_to_ndev(cfg);
-               brcmf_init_iscan_eloop(&iscan->el);
-               iscan->timer_ms = WL_ISCAN_TIMER_INTERVAL_MS;
-               init_timer(&iscan->timer);
-               iscan->timer.data = (unsigned long) iscan;
-               iscan->timer.function = brcmf_iscan_timer;
-               err = brcmf_invoke_iscan(cfg);
-               if (!err)
-                       iscan->data = cfg;
-       }
-
-       return err;
-}
-
 static void brcmf_cfg80211_escan_timeout_worker(struct work_struct *work)
 {
        struct brcmf_cfg80211_info *cfg =
@@ -2817,8 +2419,7 @@ static void brcmf_escan_timeout(unsigned long data)
 
        if (cfg->scan_request) {
                WL_ERR("timer expired\n");
-               if (cfg->escan_on)
-                       schedule_work(&cfg->escan_timeout_work);
+               schedule_work(&cfg->escan_timeout_work);
        }
 }
 
@@ -2871,11 +2472,9 @@ brcmf_cfg80211_escan_handler(struct brcmf_cfg80211_info *cfg,
 
        status = be32_to_cpu(e->status);
 
-       if (!ndev || !cfg->escan_on ||
-                       !test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
-               WL_ERR("scan not ready ndev %p wl->escan_on %d drv_status %x\n",
-                       ndev, cfg->escan_on,
-                       !test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status));
+       if (!ndev || !test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+               WL_ERR("scan not ready ndev %p drv_status %x\n", ndev,
+                      !test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status));
                return -EPERM;
        }
 
@@ -2953,17 +2552,15 @@ exit:
 static void brcmf_init_escan(struct brcmf_cfg80211_info *cfg)
 {
 
-       if (cfg->escan_on) {
-               cfg->el.handler[BRCMF_E_ESCAN_RESULT] =
-                       brcmf_cfg80211_escan_handler;
-               cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
-               /* Init scan_timeout timer */
-               init_timer(&cfg->escan_timeout);
-               cfg->escan_timeout.data = (unsigned long) cfg;
-               cfg->escan_timeout.function = brcmf_escan_timeout;
-               INIT_WORK(&cfg->escan_timeout_work,
-                       brcmf_cfg80211_escan_timeout_worker);
-       }
+       cfg->el.handler[BRCMF_E_ESCAN_RESULT] =
+               brcmf_cfg80211_escan_handler;
+       cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
+       /* Init scan_timeout timer */
+       init_timer(&cfg->escan_timeout);
+       cfg->escan_timeout.data = (unsigned long) cfg;
+       cfg->escan_timeout.function = brcmf_escan_timeout;
+       INIT_WORK(&cfg->escan_timeout_work,
+                 brcmf_cfg80211_escan_timeout_worker);
 }
 
 static __always_inline void brcmf_delay(u32 ms)
@@ -2978,20 +2575,8 @@ static __always_inline void brcmf_delay(u32 ms)
 
 static s32 brcmf_cfg80211_resume(struct wiphy *wiphy)
 {
-       struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-       struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
-
-       /*
-        * Check for BRCMF_VIF_STATUS_READY before any function call which
-        * could result is bus access. Don't block the resume for
-        * any driver error conditions
-        */
        WL_TRACE("Enter\n");
 
-       if (check_vif_up(ifp->vif))
-               brcmf_invoke_iscan(cfg);
-
-       WL_TRACE("Exit\n");
        return 0;
 }
 
@@ -3301,7 +2886,6 @@ out_err:
        return err;
 }
 
-#ifndef CONFIG_BRCMISCAN
 static int brcmf_dev_pno_clean(struct net_device *ndev)
 {
        int ret;
@@ -3438,7 +3022,6 @@ static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
                brcmf_notify_escan_complete(cfg, ndev, true, true);
        return 0;
 }
-#endif /* CONFIG_BRCMISCAN */
 
 #ifdef CONFIG_NL80211_TESTMODE
 static int brcmf_cfg80211_testmode(struct wiphy *wiphy, void *data, int len)
@@ -4146,11 +3729,8 @@ static struct cfg80211_ops wl_cfg80211_ops = {
        .start_ap = brcmf_cfg80211_start_ap,
        .stop_ap = brcmf_cfg80211_stop_ap,
        .del_station = brcmf_cfg80211_del_station,
-#ifndef CONFIG_BRCMISCAN
-       /* scheduled scan need e-scan, which is mutual exclusive with i-scan */
        .sched_scan_start = brcmf_cfg80211_sched_scan_start,
        .sched_scan_stop = brcmf_cfg80211_sched_scan_stop,
-#endif
 #ifdef CONFIG_NL80211_TESTMODE
        .testmode_cmd = brcmf_cfg80211_testmode
 #endif
@@ -4174,13 +3754,11 @@ static s32 brcmf_mode_to_nl80211_iftype(s32 mode)
 
 static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
 {
-#ifndef CONFIG_BRCMFISCAN
        /* scheduled scan settings */
        wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT;
        wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
        wiphy->max_sched_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
        wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
-#endif
 }
 
 static struct wiphy *brcmf_setup_wiphy(struct device *phydev)
@@ -4625,78 +4203,6 @@ brcmf_notify_mic_status(struct brcmf_cfg80211_info *cfg,
        return 0;
 }
 
-static s32
-brcmf_notify_scan_status(struct brcmf_cfg80211_info *cfg,
-                        struct net_device *ndev,
-                        const struct brcmf_event_msg *e, void *data)
-{
-       struct brcmf_if *ifp = netdev_priv(ndev);
-       struct brcmf_channel_info_le channel_inform_le;
-       struct brcmf_scan_results_le *bss_list_le;
-       u32 len = WL_SCAN_BUF_MAX;
-       s32 err = 0;
-       bool scan_abort = false;
-       u32 scan_channel;
-
-       WL_TRACE("Enter\n");
-
-       if (cfg->iscan_on && cfg->iscan_kickstart) {
-               WL_TRACE("Exit\n");
-               return brcmf_wakeup_iscan(cfg_to_iscan(cfg));
-       }
-
-       if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
-               WL_ERR("Scan complete while device not scanning\n");
-               scan_abort = true;
-               err = -EINVAL;
-               goto scan_done_out;
-       }
-
-       err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL,
-                                    &channel_inform_le,
-                                    sizeof(channel_inform_le));
-       if (err) {
-               WL_ERR("scan busy (%d)\n", err);
-               scan_abort = true;
-               goto scan_done_out;
-       }
-       scan_channel = le32_to_cpu(channel_inform_le.scan_channel);
-       if (scan_channel)
-               WL_CONN("channel_inform.scan_channel (%d)\n", scan_channel);
-       cfg->bss_list = cfg->scan_results;
-       bss_list_le = (struct brcmf_scan_results_le *) cfg->bss_list;
-
-       memset(cfg->scan_results, 0, len);
-       bss_list_le->buflen = cpu_to_le32(len);
-       err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_SCAN_RESULTS,
-                                    cfg->scan_results, len);
-       if (err) {
-               WL_ERR("%s Scan_results error (%d)\n", ndev->name, err);
-               err = -EINVAL;
-               scan_abort = true;
-               goto scan_done_out;
-       }
-       cfg->scan_results->buflen = le32_to_cpu(bss_list_le->buflen);
-       cfg->scan_results->version = le32_to_cpu(bss_list_le->version);
-       cfg->scan_results->count = le32_to_cpu(bss_list_le->count);
-
-       err = brcmf_inform_bss(cfg);
-       if (err)
-               scan_abort = true;
-
-scan_done_out:
-       if (cfg->scan_request) {
-               WL_SCAN("calling cfg80211_scan_done\n");
-               cfg80211_scan_done(cfg->scan_request, scan_abort);
-               brcmf_set_mpc(ndev, 1);
-               cfg->scan_request = NULL;
-       }
-
-       WL_TRACE("Exit\n");
-
-       return err;
-}
-
 static void brcmf_init_conf(struct brcmf_cfg80211_conf *conf)
 {
        conf->mode = (u32)-1;
@@ -4710,7 +4216,6 @@ static void brcmf_init_conf(struct brcmf_cfg80211_conf *conf)
 static void brcmf_init_eloop_handler(struct brcmf_cfg80211_event_loop *el)
 {
        memset(el, 0, sizeof(*el));
-       el->handler[BRCMF_E_SCAN_COMPLETE] = brcmf_notify_scan_status;
        el->handler[BRCMF_E_LINK] = brcmf_notify_connect_status;
        el->handler[BRCMF_E_DEAUTH_IND] = brcmf_notify_connect_status;
        el->handler[BRCMF_E_DEAUTH] = brcmf_notify_connect_status;
@@ -4725,53 +4230,27 @@ static void brcmf_init_eloop_handler(struct brcmf_cfg80211_event_loop *el)
 
 static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg)
 {
-       kfree(cfg->scan_results);
-       cfg->scan_results = NULL;
-       kfree(cfg->bss_info);
-       cfg->bss_info = NULL;
        kfree(cfg->conf);
        cfg->conf = NULL;
-       kfree(cfg->scan_req_int);
-       cfg->scan_req_int = NULL;
        kfree(cfg->escan_ioctl_buf);
        cfg->escan_ioctl_buf = NULL;
-       kfree(cfg->dcmd_buf);
-       cfg->dcmd_buf = NULL;
        kfree(cfg->extra_buf);
        cfg->extra_buf = NULL;
-       kfree(cfg->iscan);
-       cfg->iscan = NULL;
        kfree(cfg->pmk_list);
        cfg->pmk_list = NULL;
 }
 
 static s32 brcmf_init_priv_mem(struct brcmf_cfg80211_info *cfg)
 {
-       cfg->scan_results = kzalloc(WL_SCAN_BUF_MAX, GFP_KERNEL);
-       if (!cfg->scan_results)
-               goto init_priv_mem_out;
        cfg->conf = kzalloc(sizeof(*cfg->conf), GFP_KERNEL);
        if (!cfg->conf)
                goto init_priv_mem_out;
-       cfg->bss_info = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
-       if (!cfg->bss_info)
-               goto init_priv_mem_out;
-       cfg->scan_req_int = kzalloc(sizeof(*cfg->scan_req_int),
-                                        GFP_KERNEL);
-       if (!cfg->scan_req_int)
-               goto init_priv_mem_out;
        cfg->escan_ioctl_buf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
        if (!cfg->escan_ioctl_buf)
                goto init_priv_mem_out;
-       cfg->dcmd_buf = kzalloc(WL_DCMD_LEN_MAX, GFP_KERNEL);
-       if (!cfg->dcmd_buf)
-               goto init_priv_mem_out;
        cfg->extra_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL);
        if (!cfg->extra_buf)
                goto init_priv_mem_out;
-       cfg->iscan = kzalloc(sizeof(*cfg->iscan), GFP_KERNEL);
-       if (!cfg->iscan)
-               goto init_priv_mem_out;
        cfg->pmk_list = kzalloc(sizeof(*cfg->pmk_list), GFP_KERNEL);
        if (!cfg->pmk_list)
                goto init_priv_mem_out;
@@ -4899,21 +4378,8 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg)
 
        cfg->scan_request = NULL;
        cfg->pwr_save = true;
-#ifdef CONFIG_BRCMISCAN
-       cfg->iscan_on = true;   /* iscan on & off switch.
-                                we enable iscan per default */
-       cfg->escan_on = false;  /* escan on & off switch.
-                                we disable escan per default */
-#else
-       cfg->iscan_on = false;  /* iscan on & off switch.
-                                we disable iscan per default */
-       cfg->escan_on = true;   /* escan on & off switch.
-                                we enable escan per default */
-#endif
        cfg->roam_on = true;    /* roam on & off switch.
                                 we enable roam per default */
-
-       cfg->iscan_kickstart = false;
        cfg->active_scan = true;        /* we do active scan for
                                 specific scan per default */
        cfg->dongle_up = false; /* dongle is not up yet */
@@ -4924,9 +4390,6 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg)
        INIT_WORK(&cfg->event_work, brcmf_cfg80211_event_handler);
        brcmf_init_eloop_handler(&cfg->el);
        mutex_init(&cfg->usr_sync);
-       err = brcmf_init_iscan(cfg);
-       if (err)
-               return err;
        brcmf_init_escan(cfg);
        brcmf_init_conf(cfg->conf);
        brcmf_link_down(cfg);
@@ -5044,7 +4507,6 @@ static s32 brcmf_dongle_eventmsg(struct net_device *ndev)
        setbit(eventmask, BRCMF_E_PMKID_CACHE);
        setbit(eventmask, BRCMF_E_TXFAIL);
        setbit(eventmask, BRCMF_E_JOIN_START);
-       setbit(eventmask, BRCMF_E_SCAN_COMPLETE);
        setbit(eventmask, BRCMF_E_ESCAN_RESULT);
        setbit(eventmask, BRCMF_E_PFN_NET_FOUND);
 
@@ -5236,17 +4698,10 @@ default_conf_out:
 static s32 __brcmf_cfg80211_up(struct brcmf_cfg80211_info *cfg)
 {
        struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
-       s32 err = 0;
 
        set_bit(BRCMF_VIF_STATUS_READY, &ifp->vif->sme_state);
 
-       err = brcmf_config_dongle(cfg);
-       if (err)
-               return err;
-
-       brcmf_invoke_iscan(cfg);
-
-       return err;
+       return brcmf_config_dongle(cfg);
 }
 
 static s32 __brcmf_cfg80211_down(struct brcmf_cfg80211_info *cfg)
index d7d473cef40a34c5dea96c861d7784e345da5c42..3c5993163de68f530179ebc7f4bdba9558e9300b 100644 (file)
@@ -84,31 +84,12 @@ do {                                                                \
 #define        WL_CONN(fmt, args...)
 #endif /* (defined DEBUG) */
 
-#define WL_NUM_SCAN_MAX                1
-#define WL_NUM_PMKIDS_MAX      MAXPMKID        /* will be used
-                                                * for 2.6.33 kernel
-                                                * or later
-                                                */
-#define WL_SCAN_BUF_MAX                        (1024 * 8)
+#define WL_NUM_SCAN_MAX                        10
+#define WL_NUM_PMKIDS_MAX              MAXPMKID
 #define WL_TLV_INFO_MAX                        1024
 #define WL_BSS_INFO_MAX                        2048
-#define WL_ASSOC_INFO_MAX      512     /*
-                                * needs to grab assoc info from dongle to
-                                * report it to cfg80211 through "connect"
-                                * event
-                                */
-#define WL_DCMD_LEN_MAX        1024
-#define WL_EXTRA_BUF_MAX       2048
-#define WL_ISCAN_BUF_MAX       2048    /*
-                                * the buf length can be BRCMF_DCMD_MAXLEN
-                                * to reduce iteration
-                                */
-#define WL_ISCAN_TIMER_INTERVAL_MS     3000
-#define WL_SCAN_ERSULTS_LAST   (BRCMF_SCAN_RESULTS_NO_MEM+1)
-#define WL_AP_MAX      256     /* virtually unlimitted as long
-                                * as kernel memory allows
-                                */
-
+#define WL_ASSOC_INFO_MAX              512     /* assoc related fil max buf */
+#define WL_EXTRA_BUF_MAX               2048
 #define WL_ROAM_TRIGGER_LEVEL          -75
 #define WL_ROAM_DELTA                  20
 #define WL_BEACON_TIMEOUT              3
@@ -145,12 +126,6 @@ enum wl_mode {
        WL_MODE_AP
 };
 
-/* dongle iscan state */
-enum wl_iscan_state {
-       WL_ISCAN_STATE_IDLE,
-       WL_ISCAN_STATE_SCANING
-};
-
 /* dongle configuration */
 struct brcmf_cfg80211_conf {
        u32 mode;               /* adhoc , infrastructure or ap */
@@ -270,26 +245,6 @@ struct brcmf_cfg80211_vif {
        struct list_head list;
 };
 
-/* dongle iscan event loop */
-struct brcmf_cfg80211_iscan_eloop {
-       s32 (*handler[WL_SCAN_ERSULTS_LAST])
-               (struct brcmf_cfg80211_info *cfg);
-};
-
-/* dongle iscan controller */
-struct brcmf_cfg80211_iscan_ctrl {
-       struct net_device *ndev;
-       struct timer_list timer;
-       u32 timer_ms;
-       u32 timer_on;
-       s32 state;
-       struct work_struct work;
-       struct brcmf_cfg80211_iscan_eloop el;
-       void *data;
-       s8 dcmd_buf[BRCMF_DCMD_SMLEN];
-       s8 scan_buf[WL_ISCAN_BUF_MAX];
-};
-
 /* association inform */
 struct brcmf_cfg80211_connect_info {
        u8 *req_ie;
@@ -415,19 +370,15 @@ struct brcmf_pno_scanresults_le {
  * @evt_q_lock: for event queue synchronization.
  * @usr_sync: mainly for dongle up/down synchronization.
  * @bss_list: bss_list holding scanned ap information.
- * @scan_results: results of the last scan.
  * @scan_req_int: internal scan request object.
  * @bss_info: bss information for cfg80211 layer.
  * @ie: information element object for internal purpose.
- * @iscan: iscan controller information.
  * @conn_info: association info.
  * @pmk_list: wpa2 pmk list.
  * @event_work: event handler work struct.
  * @scan_status: scan activity on the dongle.
  * @pub: common driver information.
  * @channel: current channel.
- * @iscan_on: iscan on/off switch.
- * @iscan_kickstart: indicate iscan already started.
  * @active_scan: current scan mode.
  * @sched_escan: e-scan for scheduled scan support running.
  * @ibss_starter: indicates this sta is ibss starter.
@@ -439,7 +390,6 @@ struct brcmf_pno_scanresults_le {
  * @dcmd_buf: dcmd buffer.
  * @extra_buf: mainly to grab assoc information.
  * @debugfsdir: debugfs folder for this device.
- * @escan_on: escan on/off switch.
  * @escan_info: escan information.
  * @escan_timeout: Timer for catch scan timeout.
  * @escan_timeout_work: scan timeout worker.
@@ -456,19 +406,15 @@ struct brcmf_cfg80211_info {
        spinlock_t       evt_q_lock;
        struct mutex usr_sync;
        struct brcmf_scan_results *bss_list;
-       struct brcmf_scan_results *scan_results;
-       struct brcmf_cfg80211_scan_req *scan_req_int;
+       struct brcmf_cfg80211_scan_req scan_req_int;
        struct wl_cfg80211_bss_info *bss_info;
        struct brcmf_cfg80211_ie ie;
-       struct brcmf_cfg80211_iscan_ctrl *iscan;
        struct brcmf_cfg80211_connect_info conn_info;
        struct brcmf_cfg80211_pmk_list *pmk_list;
        struct work_struct event_work;
        unsigned long scan_status;
        struct brcmf_pub *pub;
        u32 channel;
-       bool iscan_on;
-       bool iscan_kickstart;
        bool active_scan;
        bool sched_escan;
        bool ibss_starter;
@@ -480,7 +426,6 @@ struct brcmf_cfg80211_info {
        u8 *dcmd_buf;
        u8 *extra_buf;
        struct dentry *debugfsdir;
-       bool escan_on;
        struct escan_info escan_info;
        struct timer_list escan_timeout;
        struct work_struct escan_timeout_work;
@@ -523,9 +468,6 @@ static inline struct brcmf_cfg80211_profile *ndev_to_prof(struct net_device *nd)
        return &ifp->vif->profile;
 }
 
-#define iscan_to_cfg(i) ((struct brcmf_cfg80211_info *)(i->data))
-#define cfg_to_iscan(w) (w->iscan)
-
 static inline struct
 brcmf_cfg80211_connect_info *cfg_to_conn(struct brcmf_cfg80211_info *cfg)
 {