Disintegrate asm/system.h for X86.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
cc: x86@kernel.org
#include <linux/init.h>
#include <linux/jiffies.h>
-#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
#include <linux/atomic.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
-#include <asm/system.h>
#include <asm/msr.h>
#define ARCH_APICTIMER_STOPS_ON_C3 1
#endif
#define AT_SYSINFO_EHDR 33
+/* entries in ARCH_DLINFO: */
+#if defined(CONFIG_IA32_EMULATION) || !defined(CONFIG_X86_64)
+# define AT_VECTOR_SIZE_ARCH 2
+#else /* else it's non-compat x86-64 */
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
#endif /* _ASM_X86_AUXVEC_H */
--- /dev/null
+#ifndef _ASM_X86_BARRIER_H
+#define _ASM_X86_BARRIER_H
+
+#include <asm/alternative.h>
+#include <asm/nops.h>
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() asm volatile("mfence":::"memory")
+#define rmb() asm volatile("lfence":::"memory")
+#define wmb() asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier. All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads. This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies. See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * b = 2;
+ * memory_barrier();
+ * p = &b; q = p;
+ * read_barrier_depends();
+ * d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends(). However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * a = 2;
+ * memory_barrier();
+ * b = 3; y = b;
+ * read_barrier_depends();
+ * x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b". Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends() do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb() rmb()
+#else
+# define smp_rmb() barrier()
+#endif
+#ifdef CONFIG_X86_OOSTORE
+# define smp_wmb() wmb()
+#else
+# define smp_wmb() barrier()
+#endif
+#define smp_read_barrier_depends() read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static __always_inline void rdtsc_barrier(void)
+{
+ alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+ alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif /* _ASM_X86_BARRIER_H */
#endif /* !CONFIG_BUG */
#include <asm-generic/bug.h>
+
+
+extern void show_regs_common(void);
+
#endif /* _ASM_X86_BUG_H */
/* Caches aren't brain-dead on the intel. */
#include <asm-generic/cacheflush.h>
+#include <asm/special_insns.h>
#ifdef CONFIG_X86_PAT
/*
(((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
#include <asm/processor.h>
-#include <asm/system.h>
#ifdef CONFIG_X86_32
#include <asm/desc.h>
--- /dev/null
+/* define arch_align_stack() here */
#include <asm/asm.h>
#include <asm/errno.h>
#include <asm/processor.h>
-#include <asm/system.h>
#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \
asm volatile("1:\t" insn "\n" \
#include <linux/sched.h>
#include <linux/hardirq.h>
-#include <asm/system.h>
struct pt_regs;
struct user_i387_struct;
#include <linux/percpu.h>
-#include <asm/system.h>
#include <linux/atomic.h>
#include <asm/asm.h>
#define _ASM_X86_MC146818RTC_H
#include <asm/io.h>
-#include <asm/system.h>
#include <asm/processor.h>
#include <linux/mc146818rtc.h>
#include <asm/sigcontext.h>
#include <asm/current.h>
#include <asm/cpufeature.h>
-#include <asm/system.h>
#include <asm/page.h>
#include <asm/pgtable_types.h>
#include <asm/percpu.h>
#include <asm/msr.h>
#include <asm/desc_defs.h>
#include <asm/nops.h>
+#include <asm/special_insns.h>
#include <linux/personality.h>
#include <linux/cpumask.h>
#include <linux/math64.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/irqflags.h>
+
+/*
+ * We handle most unaligned accesses in hardware. On the other hand
+ * unaligned DMA can be quite expensive on some Nehalem processors.
+ *
+ * Based on this we disable the IP header alignment in network drivers.
+ */
+#define NET_IP_ALIGN 0
#define HBP_NUM 4
/*
#define cpu_has_amd_erratum(x) (false)
#endif /* CONFIG_CPU_SUP_AMD */
+#ifdef CONFIG_X86_32
+/*
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+#endif
+
+void disable_hlt(void);
+void enable_hlt(void);
+
+void cpu_idle_wait(void);
+
+extern unsigned long arch_align_stack(unsigned long sp);
+extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
+
+void default_idle(void);
+bool set_pm_idle_to_default(void);
+
+void stop_this_cpu(void *dummy);
+
#endif /* _ASM_X86_PROCESSOR_H */
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][10];
-#endif
-#endif
+
+/*
+ * Load a segment. Fall back on loading the zero
+ * segment if something goes wrong..
+ */
+#define loadsegment(seg, value) \
+do { \
+ unsigned short __val = (value); \
+ \
+ asm volatile(" \n" \
+ "1: movl %k0,%%" #seg " \n" \
+ \
+ ".section .fixup,\"ax\" \n" \
+ "2: xorl %k0,%k0 \n" \
+ " jmp 1b \n" \
+ ".previous \n" \
+ \
+ _ASM_EXTABLE(1b, 2b) \
+ \
+ : "+r" (__val) : : "memory"); \
+} while (0)
+
+/*
+ * Save a segment register away
+ */
+#define savesegment(seg, value) \
+ asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
+
+/*
+ * x86_32 user gs accessors.
+ */
+#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_32_LAZY_GS
+#define get_user_gs(regs) (u16)({unsigned long v; savesegment(gs, v); v;})
+#define set_user_gs(regs, v) loadsegment(gs, (unsigned long)(v))
+#define task_user_gs(tsk) ((tsk)->thread.gs)
+#define lazy_save_gs(v) savesegment(gs, (v))
+#define lazy_load_gs(v) loadsegment(gs, (v))
+#else /* X86_32_LAZY_GS */
+#define get_user_gs(regs) (u16)((regs)->gs)
+#define set_user_gs(regs, v) do { (regs)->gs = (v); } while (0)
+#define task_user_gs(tsk) (task_pt_regs(tsk)->gs)
+#define lazy_save_gs(v) do { } while (0)
+#define lazy_load_gs(v) do { } while (0)
+#endif /* X86_32_LAZY_GS */
+#endif /* X86_32 */
+
+static inline unsigned long get_limit(unsigned long segment)
+{
+ unsigned long __limit;
+ asm("lsll %1,%0" : "=r" (__limit) : "r" (segment));
+ return __limit + 1;
+}
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
#endif /* _ASM_X86_SEGMENT_H */
--- /dev/null
+#ifndef _ASM_X86_SPECIAL_INSNS_H
+#define _ASM_X86_SPECIAL_INSNS_H
+
+
+#ifdef __KERNEL__
+
+static inline void native_clts(void)
+{
+ asm volatile("clts");
+}
+
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialization
+ */
+static unsigned long __force_order;
+
+static inline unsigned long native_read_cr0(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline void native_write_cr0(unsigned long val)
+{
+ asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr2(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline void native_write_cr2(unsigned long val)
+{
+ asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr3(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline void native_write_cr3(unsigned long val)
+{
+ asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr4(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long native_read_cr4_safe(void)
+{
+ unsigned long val;
+ /* This could fault if %cr4 does not exist. In x86_64, a cr4 always
+ * exists, so it will never fail. */
+#ifdef CONFIG_X86_32
+ asm volatile("1: mov %%cr4, %0\n"
+ "2:\n"
+ _ASM_EXTABLE(1b, 2b)
+ : "=r" (val), "=m" (__force_order) : "0" (0));
+#else
+ val = native_read_cr4();
+#endif
+ return val;
+}
+
+static inline void native_write_cr4(unsigned long val)
+{
+ asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order));
+}
+
+#ifdef CONFIG_X86_64
+static inline unsigned long native_read_cr8(void)
+{
+ unsigned long cr8;
+ asm volatile("movq %%cr8,%0" : "=r" (cr8));
+ return cr8;
+}
+
+static inline void native_write_cr8(unsigned long val)
+{
+ asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
+}
+#endif
+
+static inline void native_wbinvd(void)
+{
+ asm volatile("wbinvd": : :"memory");
+}
+
+extern void native_load_gs_index(unsigned);
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+
+static inline unsigned long read_cr0(void)
+{
+ return native_read_cr0();
+}
+
+static inline void write_cr0(unsigned long x)
+{
+ native_write_cr0(x);
+}
+
+static inline unsigned long read_cr2(void)
+{
+ return native_read_cr2();
+}
+
+static inline void write_cr2(unsigned long x)
+{
+ native_write_cr2(x);
+}
+
+static inline unsigned long read_cr3(void)
+{
+ return native_read_cr3();
+}
+
+static inline void write_cr3(unsigned long x)
+{
+ native_write_cr3(x);
+}
+
+static inline unsigned long read_cr4(void)
+{
+ return native_read_cr4();
+}
+
+static inline unsigned long read_cr4_safe(void)
+{
+ return native_read_cr4_safe();
+}
+
+static inline void write_cr4(unsigned long x)
+{
+ native_write_cr4(x);
+}
+
+static inline void wbinvd(void)
+{
+ native_wbinvd();
+}
+
+#ifdef CONFIG_X86_64
+
+static inline unsigned long read_cr8(void)
+{
+ return native_read_cr8();
+}
+
+static inline void write_cr8(unsigned long x)
+{
+ native_write_cr8(x);
+}
+
+static inline void load_gs_index(unsigned selector)
+{
+ native_load_gs_index(selector);
+}
+
+#endif
+
+/* Clear the 'TS' bit */
+static inline void clts(void)
+{
+ native_clts();
+}
+
+#endif/* CONFIG_PARAVIRT */
+
+#define stts() write_cr0(read_cr0() | X86_CR0_TS)
+
+static inline void clflush(volatile void *__p)
+{
+ asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p));
+}
+
+#define nop() asm volatile ("nop")
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_SPECIAL_INSNS_H */
#include <asm/tsc.h>
#include <asm/processor.h>
#include <asm/percpu.h>
-#include <asm/system.h>
#include <asm/desc.h>
#include <linux/random.h>
--- /dev/null
+#ifndef _ASM_X86_SWITCH_TO_H
+#define _ASM_X86_SWITCH_TO_H
+
+struct task_struct; /* one of the stranger aspects of C forward declarations */
+struct task_struct *__switch_to(struct task_struct *prev,
+ struct task_struct *next);
+struct tss_struct;
+void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
+ struct tss_struct *tss);
+
+#ifdef CONFIG_X86_32
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+#define __switch_canary \
+ "movl %P[task_canary](%[next]), %%ebx\n\t" \
+ "movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
+#define __switch_canary_oparam \
+ , [stack_canary] "=m" (stack_canary.canary)
+#define __switch_canary_iparam \
+ , [task_canary] "i" (offsetof(struct task_struct, stack_canary))
+#else /* CC_STACKPROTECTOR */
+#define __switch_canary
+#define __switch_canary_oparam
+#define __switch_canary_iparam
+#endif /* CC_STACKPROTECTOR */
+
+/*
+ * Saving eflags is important. It switches not only IOPL between tasks,
+ * it also protects other tasks from NT leaking through sysenter etc.
+ */
+#define switch_to(prev, next, last) \
+do { \
+ /* \
+ * Context-switching clobbers all registers, so we clobber \
+ * them explicitly, via unused output variables. \
+ * (EAX and EBP is not listed because EBP is saved/restored \
+ * explicitly for wchan access and EAX is the return value of \
+ * __switch_to()) \
+ */ \
+ unsigned long ebx, ecx, edx, esi, edi; \
+ \
+ asm volatile("pushfl\n\t" /* save flags */ \
+ "pushl %%ebp\n\t" /* save EBP */ \
+ "movl %%esp,%[prev_sp]\n\t" /* save ESP */ \
+ "movl %[next_sp],%%esp\n\t" /* restore ESP */ \
+ "movl $1f,%[prev_ip]\n\t" /* save EIP */ \
+ "pushl %[next_ip]\n\t" /* restore EIP */ \
+ __switch_canary \
+ "jmp __switch_to\n" /* regparm call */ \
+ "1:\t" \
+ "popl %%ebp\n\t" /* restore EBP */ \
+ "popfl\n" /* restore flags */ \
+ \
+ /* output parameters */ \
+ : [prev_sp] "=m" (prev->thread.sp), \
+ [prev_ip] "=m" (prev->thread.ip), \
+ "=a" (last), \
+ \
+ /* clobbered output registers: */ \
+ "=b" (ebx), "=c" (ecx), "=d" (edx), \
+ "=S" (esi), "=D" (edi) \
+ \
+ __switch_canary_oparam \
+ \
+ /* input parameters: */ \
+ : [next_sp] "m" (next->thread.sp), \
+ [next_ip] "m" (next->thread.ip), \
+ \
+ /* regparm parameters for __switch_to(): */ \
+ [prev] "a" (prev), \
+ [next] "d" (next) \
+ \
+ __switch_canary_iparam \
+ \
+ : /* reloaded segment registers */ \
+ "memory"); \
+} while (0)
+
+#else /* CONFIG_X86_32 */
+
+/* frame pointer must be last for get_wchan */
+#define SAVE_CONTEXT "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
+#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
+
+#define __EXTRA_CLOBBER \
+ , "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
+ "r12", "r13", "r14", "r15"
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+#define __switch_canary \
+ "movq %P[task_canary](%%rsi),%%r8\n\t" \
+ "movq %%r8,"__percpu_arg([gs_canary])"\n\t"
+#define __switch_canary_oparam \
+ , [gs_canary] "=m" (irq_stack_union.stack_canary)
+#define __switch_canary_iparam \
+ , [task_canary] "i" (offsetof(struct task_struct, stack_canary))
+#else /* CC_STACKPROTECTOR */
+#define __switch_canary
+#define __switch_canary_oparam
+#define __switch_canary_iparam
+#endif /* CC_STACKPROTECTOR */
+
+/* Save restore flags to clear handle leaking NT */
+#define switch_to(prev, next, last) \
+ asm volatile(SAVE_CONTEXT \
+ "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */ \
+ "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */ \
+ "call __switch_to\n\t" \
+ "movq "__percpu_arg([current_task])",%%rsi\n\t" \
+ __switch_canary \
+ "movq %P[thread_info](%%rsi),%%r8\n\t" \
+ "movq %%rax,%%rdi\n\t" \
+ "testl %[_tif_fork],%P[ti_flags](%%r8)\n\t" \
+ "jnz ret_from_fork\n\t" \
+ RESTORE_CONTEXT \
+ : "=a" (last) \
+ __switch_canary_oparam \
+ : [next] "S" (next), [prev] "D" (prev), \
+ [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
+ [ti_flags] "i" (offsetof(struct thread_info, flags)), \
+ [_tif_fork] "i" (_TIF_FORK), \
+ [thread_info] "i" (offsetof(struct task_struct, stack)), \
+ [current_task] "m" (current_task) \
+ __switch_canary_iparam \
+ : "memory", "cc" __EXTRA_CLOBBER)
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* _ASM_X86_SWITCH_TO_H */
-#ifndef _ASM_X86_SYSTEM_H
-#define _ASM_X86_SYSTEM_H
-
-#include <asm/asm.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
+/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */
+#include <asm/barrier.h>
#include <asm/cmpxchg.h>
-#include <asm/nops.h>
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-/* entries in ARCH_DLINFO: */
-#if defined(CONFIG_IA32_EMULATION) || !defined(CONFIG_X86_64)
-# define AT_VECTOR_SIZE_ARCH 2
-#else /* else it's non-compat x86-64 */
-# define AT_VECTOR_SIZE_ARCH 1
-#endif
-
-struct task_struct; /* one of the stranger aspects of C forward declarations */
-struct task_struct *__switch_to(struct task_struct *prev,
- struct task_struct *next);
-struct tss_struct;
-void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
- struct tss_struct *tss);
-extern void show_regs_common(void);
-
-#ifdef CONFIG_X86_32
-
-#ifdef CONFIG_CC_STACKPROTECTOR
-#define __switch_canary \
- "movl %P[task_canary](%[next]), %%ebx\n\t" \
- "movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
-#define __switch_canary_oparam \
- , [stack_canary] "=m" (stack_canary.canary)
-#define __switch_canary_iparam \
- , [task_canary] "i" (offsetof(struct task_struct, stack_canary))
-#else /* CC_STACKPROTECTOR */
-#define __switch_canary
-#define __switch_canary_oparam
-#define __switch_canary_iparam
-#endif /* CC_STACKPROTECTOR */
-
-/*
- * Saving eflags is important. It switches not only IOPL between tasks,
- * it also protects other tasks from NT leaking through sysenter etc.
- */
-#define switch_to(prev, next, last) \
-do { \
- /* \
- * Context-switching clobbers all registers, so we clobber \
- * them explicitly, via unused output variables. \
- * (EAX and EBP is not listed because EBP is saved/restored \
- * explicitly for wchan access and EAX is the return value of \
- * __switch_to()) \
- */ \
- unsigned long ebx, ecx, edx, esi, edi; \
- \
- asm volatile("pushfl\n\t" /* save flags */ \
- "pushl %%ebp\n\t" /* save EBP */ \
- "movl %%esp,%[prev_sp]\n\t" /* save ESP */ \
- "movl %[next_sp],%%esp\n\t" /* restore ESP */ \
- "movl $1f,%[prev_ip]\n\t" /* save EIP */ \
- "pushl %[next_ip]\n\t" /* restore EIP */ \
- __switch_canary \
- "jmp __switch_to\n" /* regparm call */ \
- "1:\t" \
- "popl %%ebp\n\t" /* restore EBP */ \
- "popfl\n" /* restore flags */ \
- \
- /* output parameters */ \
- : [prev_sp] "=m" (prev->thread.sp), \
- [prev_ip] "=m" (prev->thread.ip), \
- "=a" (last), \
- \
- /* clobbered output registers: */ \
- "=b" (ebx), "=c" (ecx), "=d" (edx), \
- "=S" (esi), "=D" (edi) \
- \
- __switch_canary_oparam \
- \
- /* input parameters: */ \
- : [next_sp] "m" (next->thread.sp), \
- [next_ip] "m" (next->thread.ip), \
- \
- /* regparm parameters for __switch_to(): */ \
- [prev] "a" (prev), \
- [next] "d" (next) \
- \
- __switch_canary_iparam \
- \
- : /* reloaded segment registers */ \
- "memory"); \
-} while (0)
-
-/*
- * disable hlt during certain critical i/o operations
- */
-#define HAVE_DISABLE_HLT
-#else
-
-/* frame pointer must be last for get_wchan */
-#define SAVE_CONTEXT "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
-#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
-
-#define __EXTRA_CLOBBER \
- , "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
- "r12", "r13", "r14", "r15"
-
-#ifdef CONFIG_CC_STACKPROTECTOR
-#define __switch_canary \
- "movq %P[task_canary](%%rsi),%%r8\n\t" \
- "movq %%r8,"__percpu_arg([gs_canary])"\n\t"
-#define __switch_canary_oparam \
- , [gs_canary] "=m" (irq_stack_union.stack_canary)
-#define __switch_canary_iparam \
- , [task_canary] "i" (offsetof(struct task_struct, stack_canary))
-#else /* CC_STACKPROTECTOR */
-#define __switch_canary
-#define __switch_canary_oparam
-#define __switch_canary_iparam
-#endif /* CC_STACKPROTECTOR */
-
-/* Save restore flags to clear handle leaking NT */
-#define switch_to(prev, next, last) \
- asm volatile(SAVE_CONTEXT \
- "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */ \
- "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */ \
- "call __switch_to\n\t" \
- "movq "__percpu_arg([current_task])",%%rsi\n\t" \
- __switch_canary \
- "movq %P[thread_info](%%rsi),%%r8\n\t" \
- "movq %%rax,%%rdi\n\t" \
- "testl %[_tif_fork],%P[ti_flags](%%r8)\n\t" \
- "jnz ret_from_fork\n\t" \
- RESTORE_CONTEXT \
- : "=a" (last) \
- __switch_canary_oparam \
- : [next] "S" (next), [prev] "D" (prev), \
- [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
- [ti_flags] "i" (offsetof(struct thread_info, flags)), \
- [_tif_fork] "i" (_TIF_FORK), \
- [thread_info] "i" (offsetof(struct task_struct, stack)), \
- [current_task] "m" (current_task) \
- __switch_canary_iparam \
- : "memory", "cc" __EXTRA_CLOBBER)
-#endif
-
-#ifdef __KERNEL__
-
-extern void native_load_gs_index(unsigned);
-
-/*
- * Load a segment. Fall back on loading the zero
- * segment if something goes wrong..
- */
-#define loadsegment(seg, value) \
-do { \
- unsigned short __val = (value); \
- \
- asm volatile(" \n" \
- "1: movl %k0,%%" #seg " \n" \
- \
- ".section .fixup,\"ax\" \n" \
- "2: xorl %k0,%k0 \n" \
- " jmp 1b \n" \
- ".previous \n" \
- \
- _ASM_EXTABLE(1b, 2b) \
- \
- : "+r" (__val) : : "memory"); \
-} while (0)
-
-/*
- * Save a segment register away
- */
-#define savesegment(seg, value) \
- asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
-
-/*
- * x86_32 user gs accessors.
- */
-#ifdef CONFIG_X86_32
-#ifdef CONFIG_X86_32_LAZY_GS
-#define get_user_gs(regs) (u16)({unsigned long v; savesegment(gs, v); v;})
-#define set_user_gs(regs, v) loadsegment(gs, (unsigned long)(v))
-#define task_user_gs(tsk) ((tsk)->thread.gs)
-#define lazy_save_gs(v) savesegment(gs, (v))
-#define lazy_load_gs(v) loadsegment(gs, (v))
-#else /* X86_32_LAZY_GS */
-#define get_user_gs(regs) (u16)((regs)->gs)
-#define set_user_gs(regs, v) do { (regs)->gs = (v); } while (0)
-#define task_user_gs(tsk) (task_pt_regs(tsk)->gs)
-#define lazy_save_gs(v) do { } while (0)
-#define lazy_load_gs(v) do { } while (0)
-#endif /* X86_32_LAZY_GS */
-#endif /* X86_32 */
-
-static inline unsigned long get_limit(unsigned long segment)
-{
- unsigned long __limit;
- asm("lsll %1,%0" : "=r" (__limit) : "r" (segment));
- return __limit + 1;
-}
-
-static inline void native_clts(void)
-{
- asm volatile("clts");
-}
-
-/*
- * Volatile isn't enough to prevent the compiler from reordering the
- * read/write functions for the control registers and messing everything up.
- * A memory clobber would solve the problem, but would prevent reordering of
- * all loads stores around it, which can hurt performance. Solution is to
- * use a variable and mimic reads and writes to it to enforce serialization
- */
-static unsigned long __force_order;
-
-static inline unsigned long native_read_cr0(void)
-{
- unsigned long val;
- asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline void native_write_cr0(unsigned long val)
-{
- asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order));
-}
-
-static inline unsigned long native_read_cr2(void)
-{
- unsigned long val;
- asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline void native_write_cr2(unsigned long val)
-{
- asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
-}
-
-static inline unsigned long native_read_cr3(void)
-{
- unsigned long val;
- asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline void native_write_cr3(unsigned long val)
-{
- asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
-}
-
-static inline unsigned long native_read_cr4(void)
-{
- unsigned long val;
- asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline unsigned long native_read_cr4_safe(void)
-{
- unsigned long val;
- /* This could fault if %cr4 does not exist. In x86_64, a cr4 always
- * exists, so it will never fail. */
-#ifdef CONFIG_X86_32
- asm volatile("1: mov %%cr4, %0\n"
- "2:\n"
- _ASM_EXTABLE(1b, 2b)
- : "=r" (val), "=m" (__force_order) : "0" (0));
-#else
- val = native_read_cr4();
-#endif
- return val;
-}
-
-static inline void native_write_cr4(unsigned long val)
-{
- asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order));
-}
-
-#ifdef CONFIG_X86_64
-static inline unsigned long native_read_cr8(void)
-{
- unsigned long cr8;
- asm volatile("movq %%cr8,%0" : "=r" (cr8));
- return cr8;
-}
-
-static inline void native_write_cr8(unsigned long val)
-{
- asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
-}
-#endif
-
-static inline void native_wbinvd(void)
-{
- asm volatile("wbinvd": : :"memory");
-}
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-
-static inline unsigned long read_cr0(void)
-{
- return native_read_cr0();
-}
-
-static inline void write_cr0(unsigned long x)
-{
- native_write_cr0(x);
-}
-
-static inline unsigned long read_cr2(void)
-{
- return native_read_cr2();
-}
-
-static inline void write_cr2(unsigned long x)
-{
- native_write_cr2(x);
-}
-
-static inline unsigned long read_cr3(void)
-{
- return native_read_cr3();
-}
-
-static inline void write_cr3(unsigned long x)
-{
- native_write_cr3(x);
-}
-
-static inline unsigned long read_cr4(void)
-{
- return native_read_cr4();
-}
-
-static inline unsigned long read_cr4_safe(void)
-{
- return native_read_cr4_safe();
-}
-
-static inline void write_cr4(unsigned long x)
-{
- native_write_cr4(x);
-}
-
-static inline void wbinvd(void)
-{
- native_wbinvd();
-}
-
-#ifdef CONFIG_X86_64
-
-static inline unsigned long read_cr8(void)
-{
- return native_read_cr8();
-}
-
-static inline void write_cr8(unsigned long x)
-{
- native_write_cr8(x);
-}
-
-static inline void load_gs_index(unsigned selector)
-{
- native_load_gs_index(selector);
-}
-
-#endif
-
-/* Clear the 'TS' bit */
-static inline void clts(void)
-{
- native_clts();
-}
-
-#endif/* CONFIG_PARAVIRT */
-
-#define stts() write_cr0(read_cr0() | X86_CR0_TS)
-
-#endif /* __KERNEL__ */
-
-static inline void clflush(volatile void *__p)
-{
- asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p));
-}
-
-#define nop() asm volatile ("nop")
-
-void disable_hlt(void);
-void enable_hlt(void);
-
-void cpu_idle_wait(void);
-
-extern unsigned long arch_align_stack(unsigned long sp);
-extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
-
-void default_idle(void);
-bool set_pm_idle_to_default(void);
-
-void stop_this_cpu(void *dummy);
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- */
-#ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define mb() asm volatile("mfence":::"memory")
-#define rmb() asm volatile("lfence":::"memory")
-#define wmb() asm volatile("sfence" ::: "memory")
-#endif
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier. All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads. This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies. See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * b = 2;
- * memory_barrier();
- * p = &b; q = p;
- * read_barrier_depends();
- * d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends(). However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * a = 2;
- * memory_barrier();
- * b = 3; y = b;
- * read_barrier_depends();
- * x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b". Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb() rmb()
-#else
-# define smp_rmb() barrier()
-#endif
-#ifdef CONFIG_X86_OOSTORE
-# define smp_wmb() wmb()
-#else
-# define smp_wmb() barrier()
-#endif
-#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-/*
- * Stop RDTSC speculation. This is needed when you need to use RDTSC
- * (or get_cycles or vread that possibly accesses the TSC) in a defined
- * code region.
- *
- * (Could use an alternative three way for this if there was one.)
- */
-static __always_inline void rdtsc_barrier(void)
-{
- alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
- alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-}
-
-/*
- * We handle most unaligned accesses in hardware. On the other hand
- * unaligned DMA can be quite expensive on some Nehalem processors.
- *
- * Based on this we disable the IP header alignment in network drivers.
- */
-#define NET_IP_ALIGN 0
-#endif /* _ASM_X86_SYSTEM_H */
+#include <asm/exec.h>
+#include <asm/special_insns.h>
+#include <asm/switch_to.h>
#include <linux/sched.h>
#include <asm/processor.h>
-#include <asm/system.h>
+#include <asm/special_insns.h>
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#define _ASM_X86_VIRTEX_H
#include <asm/processor.h>
-#include <asm/system.h>
#include <asm/vmx.h>
#include <asm/svm.h>
#include <acpi/processor.h>
#include <asm/acpi.h>
#include <asm/mwait.h>
+#include <asm/special_insns.h>
/*
* Initialize bm_flags based on the CPU cache properties
#include <linux/syscore_ops.h>
#include <linux/i8253.h>
-#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/desc.h>
#include <asm/olpc.h>
#include <linux/smp.h>
#include <asm/processor.h>
-#include <asm/system.h>
#include <asm/mce.h>
#include <asm/msr.h>
#include <linux/cpu.h>
#include <asm/processor.h>
-#include <asm/system.h>
#include <asm/apic.h>
#include <asm/idle.h>
#include <asm/mce.h>
#include <linux/init.h>
#include <asm/processor.h>
-#include <asm/system.h>
#include <asm/mce.h>
#include <asm/msr.h>
#include <asm/processor-flags.h>
#include <asm/cpufeature.h>
#include <asm/tlbflush.h>
-#include <asm/system.h>
#include <asm/mtrr.h>
#include <asm/msr.h>
#include <asm/pat.h>
#include <asm/processor.h>
#include <asm/msr.h>
-#include <asm/system.h>
static struct class *cpuid_class;
#include <linux/delay.h>
#include <linux/atomic.h>
-#include <asm/system.h>
#include <asm/timer.h>
#include <asm/hw_irq.h>
#include <asm/pgtable.h>
#include <linux/delay.h>
#include <linux/atomic.h>
-#include <asm/system.h>
#include <asm/timer.h>
#include <asm/hw_irq.h>
#include <asm/pgtable.h>
#include <asm/debugreg.h>
#include <asm/apicdef.h>
-#include <asm/system.h>
#include <asm/apic.h>
#include <asm/nmi.h>
#include <linux/vmalloc.h>
#include <linux/uaccess.h>
-#include <asm/system.h>
#include <asm/ldt.h>
#include <asm/desc.h>
#include <asm/mmu_context.h>
#include <asm/apic.h>
#include <asm/cpufeature.h>
#include <asm/desc.h>
-#include <asm/system.h>
#include <asm/cacheflush.h>
#include <asm/debugreg.h>
#include <linux/mca.h>
#include <linux/kprobes.h>
#include <linux/slab.h>
-#include <asm/system.h>
#include <asm/io.h>
#include <linux/proc_fs.h>
#include <linux/mman.h>
#include <linux/gfp.h>
#include <linux/jump_label.h>
-#include <asm/system.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/msr.h>
-#include <asm/system.h>
static struct class *msr_class;
#include <asm/apic.h>
#include <asm/tlbflush.h>
#include <asm/timer.h>
+#include <asm/special_insns.h>
/* nop stub */
void _paravirt_nop(void)
#include <asm/calgary.h>
#include <asm/tce.h>
#include <asm/pci-direct.h>
-#include <asm/system.h>
#include <asm/dma.h>
#include <asm/rio.h>
#include <asm/bios_ebda.h>
#include <trace/events/power.h>
#include <linux/hw_breakpoint.h>
#include <asm/cpu.h>
-#include <asm/system.h>
#include <asm/apic.h>
#include <asm/syscalls.h>
#include <asm/idle.h>
#include <linux/cpuidle.h>
#include <asm/pgtable.h>
-#include <asm/system.h>
#include <asm/ldt.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/syscalls.h>
#include <asm/debugreg.h>
#include <asm/nmi.h>
+#include <asm/switch_to.h>
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
#include <linux/cpuidle.h>
#include <asm/pgtable.h>
-#include <asm/system.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/syscalls.h>
#include <asm/debugreg.h>
#include <asm/nmi.h>
+#include <asm/switch_to.h>
asmlinkage extern void ret_from_fork(void);
#include <asm/uaccess.h>
#include <asm/pgtable.h>
-#include <asm/system.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/processor.h>
#include <asm/bugs.h>
-#include <asm/system.h>
#include <asm/vsyscall.h>
#include <asm/cpu.h>
#include <asm/desc.h>
#include <asm/tce.h>
#include <asm/calgary.h>
#include <asm/proto.h>
+#include <asm/cacheflush.h>
/* flush a tce at 'tceaddr' to main memory */
static inline void flush_tce(void* tceaddr)
#include <asm/uaccess.h>
#include <asm/desc.h>
-#include <asm/system.h>
#include <asm/ldt.h>
#include <asm/processor.h>
#include <asm/proto.h>
#include <asm/processor.h>
#include <asm/debugreg.h>
#include <linux/atomic.h>
-#include <asm/system.h>
#include <asm/traps.h>
#include <asm/desc.h>
#include <asm/i387.h>
#include <asm/page_types.h>
#include <asm/sections.h>
#include <asm/setup.h>
-#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
#include <asm/proto.h>
#include <asm/asm.h>
#include <asm/bios_ebda.h>
#include <asm/processor.h>
-#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/dma.h>
#include <asm/processor.h>
#include <asm/bios_ebda.h>
-#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <linux/spinlock.h>
#include <linux/module.h>
-#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/fixmap.h>
#include <linux/suspend.h>
#include <linux/bootmem.h>
-#include <asm/system.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/mmzone.h>
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff