GICv3: Add ITS entry to THUNDER dts

The PCIe host controller uses MSIs provided by GICv3 ITS. Enable it on
Thunder SoCs by adding an entry to DT.

Signed-off-by: Tirumalesh Chalamarla <tchalamarla@cavium.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index d8c0bdc51882a18cc311431e8e17776f5847ca30..9cb7cf94284a66b07619f4b2a4ab042c803c5f03 100644 (file)
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -376,10 +376,19 @@
                gic0: interrupt-controller@8010,00000000 {
                        compatible = "arm,gic-v3";
                        #interrupt-cells = <3>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
                        interrupt-controller;
                        reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
                              <0x8010 0x80000000 0x0 0x600000>; /* GICR */
                        interrupts = <1 9 0xf04>;
+
+                       its: gic-its@8010,00020000 {
+                               compatible = "arm,gic-v3-its";
+                               msi-controller;
+                               reg = <0x8010 0x20000 0x0 0x200000>;
+                       };
                };
 
                uaa0: serial@87e0,24000000 {