.send_tx_power = iwl3945_send_tx_power,
.is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
.post_associate = iwl3945_post_associate,
+ .isr = iwl_isr_legacy,
.config_ap = iwl3945_config_ap,
};
.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
.ops = &iwl3945_ops,
- .mod_params = &iwl3945_mod_params
+ .mod_params = &iwl3945_mod_params,
+ .use_isr_legacy = true
};
static struct iwl_cfg iwl3945_abg_cfg = {
.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
.ops = &iwl3945_ops,
- .mod_params = &iwl3945_mod_params
+ .mod_params = &iwl3945_mod_params,
+ .use_isr_legacy = true
};
struct pci_device_id iwl3945_hw_card_ids[] = {
.update_chain_flags = iwl_update_chain_flags,
.post_associate = iwl_post_associate,
.config_ap = iwl_config_ap,
+ .isr = iwl_isr_legacy,
.temp_ops = {
.temperature = iwl4965_temperature_calib,
.set_ct_kill = iwl4965_set_ct_threshold,
.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
.ops = &iwl4965_ops,
.mod_params = &iwl4965_mod_params,
+ .use_isr_legacy = true
};
/* Module firmware */
.query_addr = iwl5000_eeprom_query_addr,
},
.post_associate = iwl_post_associate,
+ .isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwl5000_temperature,
.query_addr = iwl5000_eeprom_query_addr,
},
.post_associate = iwl_post_associate,
+ .isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwl5150_temperature,
tasklet_kill(&priv->irq_tasklet);
}
-static void iwl_irq_tasklet(struct iwl_priv *priv)
+static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
{
u32 inta, handled = 0;
u32 inta_fh;
spin_unlock_irqrestore(&priv->lock, flags);
}
+/* tasklet for iwlagn interrupt */
+static void iwl_irq_tasklet(struct iwl_priv *priv)
+{
+ u32 inta = 0;
+ u32 handled = 0;
+ unsigned long flags;
+#ifdef CONFIG_IWLWIFI_DEBUG
+ u32 inta_mask;
+#endif
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Ack/clear/reset pending uCode interrupts.
+ * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+ */
+ iwl_write32(priv, CSR_INT, priv->inta);
+
+ inta = priv->inta;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (priv->debug_level & IWL_DL_ISR) {
+ /* just for debug */
+ inta_mask = iwl_read32(priv, CSR_INT_MASK);
+ IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
+ inta, inta_mask);
+ }
+#endif
+ /* saved interrupt in inta variable now we can reset priv->inta */
+ priv->inta = 0;
+
+ /* Now service all interrupt bits discovered above. */
+ if (inta & CSR_INT_BIT_HW_ERR) {
+ IWL_ERR(priv, "Microcode HW error detected. Restarting.\n");
+
+ /* Tell the device to stop sending interrupts */
+ iwl_disable_interrupts(priv);
+
+ priv->isr_stats.hw++;
+ iwl_irq_handle_error(priv);
+
+ handled |= CSR_INT_BIT_HW_ERR;
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return;
+ }
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (priv->debug_level & (IWL_DL_ISR)) {
+ /* NIC fires this, but we don't use it, redundant with WAKEUP */
+ if (inta & CSR_INT_BIT_SCD) {
+ IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
+ "the frame/frames.\n");
+ priv->isr_stats.sch++;
+ }
+
+ /* Alive notification via Rx interrupt will do the real work */
+ if (inta & CSR_INT_BIT_ALIVE) {
+ IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+ priv->isr_stats.alive++;
+ }
+ }
+#endif
+ /* Safely ignore these bits for debug checks below */
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+ /* HW RF KILL switch toggled */
+ if (inta & CSR_INT_BIT_RF_KILL) {
+ int hw_rf_kill = 0;
+ if (!(iwl_read32(priv, CSR_GP_CNTRL) &
+ CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+ hw_rf_kill = 1;
+
+ IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
+ hw_rf_kill ? "disable radio" : "enable radio");
+
+ priv->isr_stats.rfkill++;
+
+ /* driver only loads ucode once setting the interface up.
+ * the driver allows loading the ucode even if the radio
+ * is killed. Hence update the killswitch state here. The
+ * rfkill handler will care about restarting if needed.
+ */
+ if (!test_bit(STATUS_ALIVE, &priv->status)) {
+ if (hw_rf_kill)
+ set_bit(STATUS_RF_KILL_HW, &priv->status);
+ else
+ clear_bit(STATUS_RF_KILL_HW, &priv->status);
+ queue_work(priv->workqueue, &priv->rf_kill);
+ }
+
+ handled |= CSR_INT_BIT_RF_KILL;
+ }
+
+ /* Chip got too hot and stopped itself */
+ if (inta & CSR_INT_BIT_CT_KILL) {
+ IWL_ERR(priv, "Microcode CT kill error detected.\n");
+ priv->isr_stats.ctkill++;
+ handled |= CSR_INT_BIT_CT_KILL;
+ }
+
+ /* Error detected by uCode */
+ if (inta & CSR_INT_BIT_SW_ERR) {
+ IWL_ERR(priv, "Microcode SW error detected. "
+ " Restarting 0x%X.\n", inta);
+ priv->isr_stats.sw++;
+ priv->isr_stats.sw_err = inta;
+ iwl_irq_handle_error(priv);
+ handled |= CSR_INT_BIT_SW_ERR;
+ }
+
+ /* uCode wakes up after power-down sleep */
+ if (inta & CSR_INT_BIT_WAKEUP) {
+ IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
+ iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
+ iwl_txq_update_write_ptr(priv, &priv->txq[0]);
+ iwl_txq_update_write_ptr(priv, &priv->txq[1]);
+ iwl_txq_update_write_ptr(priv, &priv->txq[2]);
+ iwl_txq_update_write_ptr(priv, &priv->txq[3]);
+ iwl_txq_update_write_ptr(priv, &priv->txq[4]);
+ iwl_txq_update_write_ptr(priv, &priv->txq[5]);
+
+ priv->isr_stats.wakeup++;
+
+ handled |= CSR_INT_BIT_WAKEUP;
+ }
+
+ /* All uCode command responses, including Tx command responses,
+ * Rx "responses" (frame-received notification), and other
+ * notifications from uCode come through here*/
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+ IWL_DEBUG_ISR(priv, "Rx interrupt\n");
+ iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_RX_MASK);
+ iwl_rx_handle(priv);
+ priv->isr_stats.rx++;
+ handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+ }
+
+ if (inta & CSR_INT_BIT_FH_TX) {
+ iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
+ IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+ priv->isr_stats.tx++;
+ handled |= CSR_INT_BIT_FH_TX;
+ /* FH finished to write, send event */
+ priv->ucode_write_complete = 1;
+ wake_up_interruptible(&priv->wait_command_queue);
+ }
+
+ if (inta & ~handled) {
+ IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+ priv->isr_stats.unhandled++;
+ }
+
+ if (inta & ~CSR_INI_SET_MASK) {
+ IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
+ inta & ~CSR_INI_SET_MASK);
+ }
+
+
+ /* Re-enable all interrupts */
+ /* only Re-enable if diabled by irq */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status))
+ iwl_enable_interrupts(priv);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+}
+
/******************************************************************************
*
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
STATUS_EXIT_PENDING;
+ /* device going down, Stop using ICT table */
+ iwl_disable_ict(priv);
spin_lock_irqsave(&priv->lock, flags);
iwl_clear_bit(priv, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
/* clear (again), then enable host interrupts */
iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+ /* enable dram interrupt */
+ iwl_reset_ict(priv);
iwl_enable_interrupts(priv);
/* really make sure rfkill handshake bits are cleared */
priv->statistics_periodic.data = (unsigned long)priv;
priv->statistics_periodic.function = iwl_bg_statistics_periodic;
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
- iwl_irq_tasklet, (unsigned long)priv);
+ if (!priv->cfg->use_isr_legacy)
+ tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+ iwl_irq_tasklet, (unsigned long)priv);
+ else
+ tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+ iwl_irq_tasklet_legacy, (unsigned long)priv);
}
static void iwl_cancel_deferred_work(struct iwl_priv *priv)
pci_enable_msi(priv->pci_dev);
- err = request_irq(priv->pci_dev->irq, iwl_isr, IRQF_SHARED,
- DRV_NAME, priv);
+ iwl_alloc_isr_ict(priv);
+ err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
+ IRQF_SHARED, DRV_NAME, priv);
if (err) {
IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
goto out_disable_msi;
sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
out_free_irq:
free_irq(priv->pci_dev->irq, priv);
+ iwl_free_isr_ict(priv);
out_disable_msi:
pci_disable_msi(priv->pci_dev);
iwl_uninit_drv(priv);
iwl_uninit_drv(priv);
+ iwl_free_isr_ict(priv);
+
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);
#include "iwl-rfkill.h"
#include "iwl-power.h"
#include "iwl-sta.h"
+#include "iwl-helpers.h"
MODULE_DESCRIPTION("iwl core");
IWL_RATE_##pp##M_INDEX, \
IWL_RATE_##np##M_INDEX }
+static irqreturn_t iwl_isr(int irq, void *data);
+
/*
* Parameter order:
* rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
}
EXPORT_SYMBOL(iwl_enable_interrupts);
-irqreturn_t iwl_isr(int irq, void *data)
+
+#define ICT_COUNT (PAGE_SIZE/sizeof(u32))
+
+/* Free dram table */
+void iwl_free_isr_ict(struct iwl_priv *priv)
+{
+ if (priv->ict_tbl_vir) {
+ pci_free_consistent(priv->pci_dev, (sizeof(u32) * ICT_COUNT) +
+ PAGE_SIZE, priv->ict_tbl_vir,
+ priv->ict_tbl_dma);
+ priv->ict_tbl_vir = NULL;
+ }
+}
+EXPORT_SYMBOL(iwl_free_isr_ict);
+
+
+/* allocate dram shared table it is a PAGE_SIZE aligned
+ * also reset all data related to ICT table interrupt.
+ */
+int iwl_alloc_isr_ict(struct iwl_priv *priv)
+{
+
+ if (priv->cfg->use_isr_legacy)
+ return 0;
+ /* allocate shrared data table */
+ priv->ict_tbl_vir = pci_alloc_consistent(priv->pci_dev, (sizeof(u32) *
+ ICT_COUNT) + PAGE_SIZE,
+ &priv->ict_tbl_dma);
+ if (!priv->ict_tbl_vir)
+ return -ENOMEM;
+
+ /* align table to PAGE_SIZE boundry */
+ priv->aligned_ict_tbl_dma = ALIGN(priv->ict_tbl_dma, PAGE_SIZE);
+
+ IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n",
+ (unsigned long long)priv->ict_tbl_dma,
+ (unsigned long long)priv->aligned_ict_tbl_dma,
+ (int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma));
+
+ priv->ict_tbl = priv->ict_tbl_vir +
+ (priv->aligned_ict_tbl_dma - priv->ict_tbl_dma);
+
+ IWL_DEBUG_ISR(priv, "ict vir addr %p vir aligned %p diff %d\n",
+ priv->ict_tbl, priv->ict_tbl_vir,
+ (int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma));
+
+ /* reset table and index to all 0 */
+ memset(priv->ict_tbl_vir,0, (sizeof(u32) * ICT_COUNT) + PAGE_SIZE);
+ priv->ict_index = 0;
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_alloc_isr_ict);
+
+/* Device is going up inform it about using ICT interrupt table,
+ * also we need to tell the driver to start using ICT interrupt.
+ */
+int iwl_reset_ict(struct iwl_priv *priv)
+{
+ u32 val;
+ unsigned long flags;
+
+ if (!priv->ict_tbl_vir)
+ return 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl_disable_interrupts(priv);
+
+ memset(&priv->ict_tbl[0],0, sizeof(u32) * ICT_COUNT);
+
+ val = priv->aligned_ict_tbl_dma >> PAGE_SHIFT;
+
+ val |= CSR_DRAM_INT_TBL_ENABLE;
+ val |= CSR_DRAM_INIT_TBL_WRAP_CHECK;
+
+ IWL_DEBUG_ISR(priv, "CSR_DRAM_INT_TBL_REG =0x%X "
+ "aligned dma address %Lx\n",
+ val, (unsigned long long)priv->aligned_ict_tbl_dma);
+
+ iwl_write32(priv, CSR_DRAM_INT_TBL_REG, val);
+ priv->use_ict = true;
+ priv->ict_index = 0;
+ iwl_write32(priv, CSR_INT, CSR_INI_SET_MASK);
+ iwl_enable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_reset_ict);
+
+/* Device is going down disable ict interrupt usage */
+void iwl_disable_ict(struct iwl_priv *priv)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->use_ict = false;
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+EXPORT_SYMBOL(iwl_disable_ict);
+
+/* interrupt handler using ict table, with this interrupt driver will
+ * stop using INTA register to get device's interrupt, reading this register
+ * is expensive, device will write interrupts in ICT dram table, increment
+ * index then will fire interrupt to driver, driver will OR all ICT table
+ * entries from current index up to table entry with 0 value. the result is
+ * the interrupt we need to service, driver will set the entries back to 0 and
+ * set index.
+ */
+irqreturn_t iwl_isr_ict(int irq, void *data)
+{
+ struct iwl_priv *priv = data;
+ u32 inta, inta_mask;
+ u32 val = 0;
+
+ if (!priv)
+ return IRQ_NONE;
+
+ /* dram interrupt table not set yet,
+ * use legacy interrupt.
+ */
+ if (!priv->use_ict)
+ return iwl_isr(irq, data);
+
+ spin_lock(&priv->lock);
+
+ /* Disable (but don't clear!) interrupts here to avoid
+ * back-to-back ISRs and sporadic interrupts from our NIC.
+ * If we have something to service, the tasklet will re-enable ints.
+ * If we *don't* have something, we'll re-enable before leaving here.
+ */
+ inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */
+ iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+
+ /* Ignore interrupt if there's nothing in NIC to service.
+ * This may be due to IRQ shared with another device,
+ * or due to sporadic interrupts thrown from our NIC. */
+ if (!priv->ict_tbl[priv->ict_index]) {
+ IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+ goto none;
+ }
+
+ /* read all entries that not 0 start with ict_index */
+ while (priv->ict_tbl[priv->ict_index]) {
+
+ val |= priv->ict_tbl[priv->ict_index];
+ IWL_DEBUG_ISR(priv, "ICT index %d value 0x%08X\n",
+ priv->ict_index,
+ priv->ict_tbl[priv->ict_index]);
+ priv->ict_tbl[priv->ict_index] = 0;
+ priv->ict_index = iwl_queue_inc_wrap(priv->ict_index,
+ ICT_COUNT);
+
+ }
+
+ /* We should not get this value, just ignore it. */
+ if (val == 0xffffffff)
+ val = 0;
+
+ inta = (0xff & val) | ((0xff00 & val) << 16);
+ IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n",
+ inta, inta_mask, val);
+
+ inta &= CSR_INI_SET_MASK;
+ priv->inta |= inta;
+
+ /* iwl_irq_tasklet() will service interrupts and re-enable them */
+ if (likely(inta))
+ tasklet_schedule(&priv->irq_tasklet);
+ else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) {
+ /* Allow interrupt if was disabled by this handler and
+ * no tasklet was schedules, We should not enable interrupt,
+ * tasklet will enable it.
+ */
+ iwl_enable_interrupts(priv);
+ }
+
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+
+ none:
+ /* re-enable interrupts here since we don't have anything to service.
+ * only Re-enable if disabled by irq.
+ */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+ iwl_enable_interrupts(priv);
+
+ spin_unlock(&priv->lock);
+ return IRQ_NONE;
+}
+EXPORT_SYMBOL(iwl_isr_ict);
+
+
+static irqreturn_t iwl_isr(int irq, void *data)
+{
+ struct iwl_priv *priv = data;
+ u32 inta, inta_mask;
+ u32 inta_fh;
+
+ if (!priv)
+ return IRQ_NONE;
+
+ spin_lock(&priv->lock);
+
+ /* Disable (but don't clear!) interrupts here to avoid
+ * back-to-back ISRs and sporadic interrupts from our NIC.
+ * If we have something to service, the tasklet will re-enable ints.
+ * If we *don't* have something, we'll re-enable before leaving here. */
+ inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */
+ iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+ /* Discover which interrupts are active/pending */
+ inta = iwl_read32(priv, CSR_INT);
+
+ /* Ignore interrupt if there's nothing in NIC to service.
+ * This may be due to IRQ shared with another device,
+ * or due to sporadic interrupts thrown from our NIC. */
+ if (!inta) {
+ IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+ goto none;
+ }
+
+ if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+ /* Hardware disappeared. It might have already raised
+ * an interrupt */
+ IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+ goto unplugged;
+ }
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (priv->debug_level & (IWL_DL_ISR)) {
+ inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+ IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, "
+ "fh 0x%08x\n", inta, inta_mask, inta_fh);
+ }
+#endif
+
+ priv->inta |= inta;
+ /* iwl_irq_tasklet() will service interrupts and re-enable them */
+ if (likely(inta))
+ tasklet_schedule(&priv->irq_tasklet);
+ else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+ iwl_enable_interrupts(priv);
+
+ unplugged:
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+
+ none:
+ /* re-enable interrupts here since we don't have anything to service. */
+ /* only Re-enable if diabled by irq and no schedules tasklet. */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+ iwl_enable_interrupts(priv);
+
+ spin_unlock(&priv->lock);
+ return IRQ_NONE;
+}
+
+irqreturn_t iwl_isr_legacy(int irq, void *data)
{
struct iwl_priv *priv = data;
u32 inta, inta_mask;
spin_unlock(&priv->lock);
return IRQ_NONE;
}
-EXPORT_SYMBOL(iwl_isr);
+EXPORT_SYMBOL(iwl_isr_legacy);
int iwl_send_bt_config(struct iwl_priv *priv)
{
void (*update_chain_flags)(struct iwl_priv *priv);
void (*post_associate) (struct iwl_priv *priv);
void (*config_ap) (struct iwl_priv *priv);
+ irqreturn_t (*isr) (int irq, void *data);
/* eeprom operations (as defined in iwl-eeprom.h) */
struct iwl_eeprom_ops eeprom_ops;
u8 valid_tx_ant;
u8 valid_rx_ant;
bool need_pll_cfg;
+ bool use_isr_legacy;
};
/***************************
*****************************************************/
void iwl_disable_interrupts(struct iwl_priv *priv);
void iwl_enable_interrupts(struct iwl_priv *priv);
-irqreturn_t iwl_isr(int irq, void *data);
+irqreturn_t iwl_isr_legacy(int irq, void *data);
+int iwl_reset_ict(struct iwl_priv *priv);
+void iwl_disable_ict(struct iwl_priv *priv);
+int iwl_alloc_isr_ict(struct iwl_priv *priv);
+void iwl_free_isr_ict(struct iwl_priv *priv);
+irqreturn_t iwl_isr_ict(int irq, void *data);
+
static inline u16 iwl_pcie_link_ctl(struct iwl_priv *priv)
{
int pos;
#define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c)
#define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060)
#define CSR_LED_REG (CSR_BASE+0x094)
+#define CSR_DRAM_INT_TBL_REG (CSR_BASE+0x0A0)
#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
/* Analog phase-lock-loop configuration */
/* HPET MEM debug */
#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000)
+
+/* DRAM INT TABLE */
+#define CSR_DRAM_INT_TBL_ENABLE (1 << 31)
+#define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27)
+
/*=== HBUS (Host-side Bus) ===*/
#define HBUS_BASE (0x400)
/*
/*End*/
struct iwl_hw_params hw_params;
+ /* INT ICT Table */
+ u32 *ict_tbl;
+ dma_addr_t ict_tbl_dma;
+ dma_addr_t aligned_ict_tbl_dma;
+ int ict_index;
+ void *ict_tbl_vir;
+ u32 inta;
+ bool use_ict;
/* Current association information needed to configure the
* hardware */
pci_enable_msi(priv->pci_dev);
- err = request_irq(priv->pci_dev->irq, iwl_isr, IRQF_SHARED,
- DRV_NAME, priv);
+ err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
+ IRQF_SHARED, DRV_NAME, priv);
if (err) {
IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
goto out_disable_msi;
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff