/*
* There are two serial driver i.e. 8250 based simple serial
* driver and APB DMA based serial driver for higher baudrate
- * and performace. To enable the 8250 based driver, the compatible
+ * and performance. To enable the 8250 based driver, the compatible
* is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
* the APB DMA based serial driver, the comptible is
* "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
/*
* There are two serial driver i.e. 8250 based simple serial
* driver and APB DMA based serial driver for higher baudrate
- * and performace. To enable the 8250 based driver, the compatible
+ * and performance. To enable the 8250 based driver, the compatible
* is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
* the APB DMA based serial driver, the comptible is
* "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
* See kernel/trace/trace_syscalls.c
*
* x86 code says:
- * If the user realy wants these, then they should use the
+ * If the user really wants these, then they should use the
* raw syscall tracepoints with filtering.
*/
#define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS
/*
* The bits we set in HCR:
- * RW: 64bit by default, can be overriden for 32bit VMs
+ * RW: 64bit by default, can be overridden for 32bit VMs
* TAC: Trap ACTLR
* TSC: Trap SMC
* TVM: Trap VM ops (until M+C set in SCTLR_EL1)
TTBR1_EL1, /* Translation Table Base Register 1 */
TCR_EL1, /* Translation Control Register */
ESR_EL1, /* Exception Syndrome Register */
- AFSR0_EL1, /* Auxilary Fault Status Register 0 */
- AFSR1_EL1, /* Auxilary Fault Status Register 1 */
+ AFSR0_EL1, /* Auxiliary Fault Status Register 0 */
+ AFSR1_EL1, /* Auxiliary Fault Status Register 1 */
FAR_EL1, /* Fault Address Register */
MAIR_EL1, /* Memory Attribute Indirection Register */
VBAR_EL1, /* Vector Base Address Register */
* been used to perform kernel mode NEON in the meantime.
*
* For (a), we add a 'cpu' field to struct fpsimd_state, which gets updated to
- * the id of the current CPU everytime the state is loaded onto a CPU. For (b),
+ * the id of the current CPU every time the state is loaded onto a CPU. For (b),
* we add the per-cpu variable 'fpsimd_last_state' (below), which contains the
* address of the userland FPSIMD state of the task that was loaded onto the CPU
* the most recently, or NULL if kernel mode NEON has been performed after that.
};
/*
- * kgdb_arch_init - Perform any architecture specific initalization.
- * This function will handle the initalization of any architecture
+ * kgdb_arch_init - Perform any architecture specific initialization.
+ * This function will handle the initialization of any architecture
* specific callbacks.
*/
int kgdb_arch_init(void)
#ifdef BUS_MCEERR_AO
/*
* Other callers might not initialize the si_lsb field,
- * so check explicitely for the right codes here.
+ * so check explicitly for the right codes here.
*/
if (from->si_signo == SIGBUS &&
(from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
.Lunequal_proc:
cbz diff, .Lremain8
-/*There is differnence occured in the latest comparison.*/
+/* There is difference occurred in the latest comparison. */
.Lnot_limit:
/*
* For little endian,reverse the low significant equal bits into MSB,then