[PATCH] i2c: scx200_acb debug log cleanup

scx200_acb: debug log cleanup

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index f45779b7690804d94452ef9670f12e2a77017e68..bfa243d5a8f2880231ff1aa4df48af426670247d 100644 (file)
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -45,12 +45,6 @@ static int base[MAX_DEVICES] = { 0x820, 0x840 };
 module_param_array(base, int, NULL, 0);
 MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
 
-#ifdef DEBUG
-#define DBG(x...) printk(KERN_DEBUG NAME ": " x)
-#else
-#define DBG(x...)
-#endif
-
 /* The hardware supports interrupt driven mode too, but I haven't
    implemented that. */
 #define POLLED_MODE 1
@@ -119,8 +113,8 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
 {
        const char *errmsg;
 
-       DBG("state %s, status = 0x%02x\n",
-           scx200_acb_state_name[iface->state], status);
+       dev_dbg(&iface->adapter.dev, "state %s, status = 0x%02x\n",
+               scx200_acb_state_name[iface->state], status);
 
        if (status & ACBST_BER) {
                errmsg = "bus error";
@@ -209,8 +203,8 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
        return;
 
  negack:
-       DBG("negative acknowledge in state %s\n",
-           scx200_acb_state_name[iface->state]);
+       dev_dbg(&iface->adapter.dev, "negative ack in state %s\n",
+               scx200_acb_state_name[iface->state]);
 
        iface->state = state_idle;
        iface->result = -ENXIO;
@@ -326,19 +320,15 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
                return -EINVAL;
        }
 
-       DBG("size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n",
-           size, address, command, len, rw == I2C_SMBUS_READ);
+       dev_dbg(&adapter->dev,
+               "size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n",
+               size, address, command, len, rw);
 
        if (!len && rw == I2C_SMBUS_READ) {
-               dev_warn(&adapter->dev, "zero length read\n");
+               dev_dbg(&adapter->dev, "zero length read\n");
                return -EINVAL;
        }
 
-       if (len && !buffer) {
-               dev_warn(&adapter->dev, "nonzero length but no buffer\n");
-               return -EFAULT;
-       }
-
        down(&iface->sem);
 
        iface->address_byte = address<<1;
@@ -375,7 +365,7 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
                data->word = le16_to_cpu(cur_word);
 
 #ifdef DEBUG
-       DBG(": transfer done, result: %d", rc);
+       dev_dbg(&adapter->dev, "transfer done, result: %d", rc);
        if (buffer) {
                int i;
                printk(" data:");
@@ -412,7 +402,7 @@ static int scx200_acb_probe(struct scx200_acb_iface *iface)
        outb(0x70, ACBCTL2);
 
        if (inb(ACBCTL2) != 0x70) {
-               DBG("ACBCTL2 readback failed\n");
+               pr_debug(NAME ": ACBCTL2 readback failed\n");
                return -ENXIO;
        }
 
@@ -420,7 +410,8 @@ static int scx200_acb_probe(struct scx200_acb_iface *iface)
 
        val = inb(ACBCTL1);
        if (val) {
-               DBG("disabled, but ACBCTL1=0x%02x\n", val);
+               pr_debug(NAME ": disabled, but ACBCTL1=0x%02x\n",
+                       val);
                return -ENXIO;
        }
 
@@ -430,7 +421,8 @@ static int scx200_acb_probe(struct scx200_acb_iface *iface)
 
        val = inb(ACBCTL1);
        if ((val & ACBCTL1_NMINTE) != ACBCTL1_NMINTE) {
-               DBG("enabled, but NMINTE won't be set, ACBCTL1=0x%02x\n", val);
+               pr_debug(NAME ": enabled, but NMINTE won't be set, "
+                        "ACBCTL1=0x%02x\n", val);
                return -ENXIO;
        }
 
@@ -464,7 +456,7 @@ static int  __init scx200_acb_create(int base, int index)
        snprintf(description, sizeof(description),
                 "NatSemi SCx200 ACCESS.bus [%s]", adapter->name);
        if (request_region(base, 8, description) == 0) {
-               dev_err(&adapter->dev, "can't allocate io 0x%x-0x%x\n",
+               printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n",
                        base, base + 8-1);
                rc = -EBUSY;
                goto errout;
@@ -473,14 +465,14 @@ static int  __init scx200_acb_create(int base, int index)
 
        rc = scx200_acb_probe(iface);
        if (rc) {
-               dev_warn(&adapter->dev, "probe failed\n");
+               printk(KERN_WARNING NAME ": probe failed\n");
                goto errout;
        }
 
        scx200_acb_reset(iface);
 
        if (i2c_add_adapter(adapter) < 0) {
-               dev_err(&adapter->dev, "failed to register\n");
+               printk(KERN_ERR NAME ": failed to register\n");
                rc = -ENODEV;
                goto errout;
        }