[media] rtl28xxu: move rtl2832u tuner probing to .read_config()
authorAntti Palosaari <crope@iki.fi>
Mon, 17 Sep 2012 17:01:35 +0000 (14:01 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Thu, 27 Sep 2012 18:14:10 +0000 (15:14 -0300)
Move rtl2832u tuner probing correct place.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/dvb-usb-v2/rtl28xxu.c
drivers/media/usb/dvb-usb-v2/rtl28xxu.h

index 226ec542a7035245beefeab22ca9323e869dc5e8..5eabeacccbc1abe7a111f9fe86798821cda58639 100644 (file)
@@ -254,6 +254,156 @@ static struct i2c_algorithm rtl28xxu_i2c_algo = {
        .functionality = rtl28xxu_i2c_func,
 };
 
+static int rtl2832u_read_config(struct dvb_usb_device *d)
+{
+       struct rtl28xxu_priv *priv = d_to_priv(d);
+       int ret;
+       u8 buf[2], val;
+       /* open RTL2832U/RTL2832 I2C gate */
+       struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
+       /* close RTL2832U/RTL2832 I2C gate */
+       struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
+       /* tuner probes */
+       struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
+       struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
+       struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
+       struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
+       struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
+       struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
+       struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
+       struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
+       struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
+       struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
+
+       dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+       ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val);
+       if (ret)
+               goto err;
+
+       val &= 0xbf;
+
+       ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
+       if (ret)
+               goto err;
+
+       /* enable as output GPIO3 and GPIO6 */
+       ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val);
+       if (ret)
+               goto err;
+
+       val |= 0x48;
+
+       ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
+       if (ret)
+               goto err;
+
+       /*
+        * Probe used tuner. We need to know used tuner before demod attach
+        * since there is some demod params needed to set according to tuner.
+        */
+
+       /* open demod I2C gate */
+       ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+       if (ret)
+               goto err;
+
+       priv->tuner_name = "NONE";
+
+       /* check FC0012 ID register; reg=00 val=a1 */
+       ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
+       if (ret == 0 && buf[0] == 0xa1) {
+               priv->tuner = TUNER_RTL2832_FC0012;
+               priv->tuner_name = "FC0012";
+               goto found;
+       }
+
+       /* check FC0013 ID register; reg=00 val=a3 */
+       ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
+       if (ret == 0 && buf[0] == 0xa3) {
+               priv->tuner = TUNER_RTL2832_FC0013;
+               priv->tuner_name = "FC0013";
+               goto found;
+       }
+
+       /* check MT2266 ID register; reg=00 val=85 */
+       ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
+       if (ret == 0 && buf[0] == 0x85) {
+               priv->tuner = TUNER_RTL2832_MT2266;
+               priv->tuner_name = "MT2266";
+               goto found;
+       }
+
+       /* check FC2580 ID register; reg=01 val=56 */
+       ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
+       if (ret == 0 && buf[0] == 0x56) {
+               priv->tuner = TUNER_RTL2832_FC2580;
+               priv->tuner_name = "FC2580";
+               goto found;
+       }
+
+       /* check MT2063 ID register; reg=00 val=9e || 9c */
+       ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
+       if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
+               priv->tuner = TUNER_RTL2832_MT2063;
+               priv->tuner_name = "MT2063";
+               goto found;
+       }
+
+       /* check MAX3543 ID register; reg=00 val=38 */
+       ret = rtl28xxu_ctrl_msg(d, &req_max3543);
+       if (ret == 0 && buf[0] == 0x38) {
+               priv->tuner = TUNER_RTL2832_MAX3543;
+               priv->tuner_name = "MAX3543";
+               goto found;
+       }
+
+       /* check TUA9001 ID register; reg=7e val=2328 */
+       ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
+       if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
+               priv->tuner = TUNER_RTL2832_TUA9001;
+               priv->tuner_name = "TUA9001";
+               goto found;
+       }
+
+       /* check MXL5007R ID register; reg=d9 val=14 */
+       ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
+       if (ret == 0 && buf[0] == 0x14) {
+               priv->tuner = TUNER_RTL2832_MXL5007T;
+               priv->tuner_name = "MXL5007T";
+               goto found;
+       }
+
+       /* check E4000 ID register; reg=02 val=40 */
+       ret = rtl28xxu_ctrl_msg(d, &req_e4000);
+       if (ret == 0 && buf[0] == 0x40) {
+               priv->tuner = TUNER_RTL2832_E4000;
+               priv->tuner_name = "E4000";
+               goto found;
+       }
+
+       /* check TDA18272 ID register; reg=00 val=c760  */
+       ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
+       if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
+               priv->tuner = TUNER_RTL2832_TDA18272;
+               priv->tuner_name = "TDA18272";
+               goto found;
+       }
+
+found:
+       dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name);
+
+       /* close demod I2C gate */
+       ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
+       if (ret < 0)
+               goto err;
+
+       return 0;
+err:
+       dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+       return ret;
+}
+
 static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = {
        .i2c_addr = 0x10, /* 0x20 */
        .xtal = 28800000,
@@ -537,199 +687,45 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
        struct dvb_usb_device *d = adap_to_d(adap);
        struct rtl28xxu_priv *priv = d_to_priv(d);
        struct rtl2832_config *rtl2832_config;
-       u8 buf[2], val;
-       /* open RTL2832U/RTL2832 I2C gate */
-       struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
-       /* close RTL2832U/RTL2832 I2C gate */
-       struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
-       /* for FC0012 tuner probe */
-       struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
-       /* for FC0013 tuner probe */
-       struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
-       /* for MT2266 tuner probe */
-       struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
-       /* for FC2580 tuner probe */
-       struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
-       /* for MT2063 tuner probe */
-       struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
-       /* for MAX3543 tuner probe */
-       struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
-       /* for TUA9001 tuner probe */
-       struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
-       /* for MXL5007T tuner probe */
-       struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
-       /* for E4000 tuner probe */
-       struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
-       /* for TDA18272 tuner probe */
-       struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
 
        dev_dbg(&d->udev->dev, "%s:\n", __func__);
 
-       ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val);
-       if (ret)
-               goto err;
-
-       val &= 0xbf;
-
-       ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
-       if (ret)
-               goto err;
-
-       /* enable as output GPIO3 and GPIO6*/
-       ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val);
-       if (ret)
-               goto err;
-
-       val |= 0x48;
-
-       ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
-       if (ret)
-               goto err;
-
-       /*
-        * Probe used tuner. We need to know used tuner before demod attach
-        * since there is some demod params needed to set according to tuner.
-        */
-
-       /* open demod I2C gate */
-       ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
-       if (ret)
-               goto err;
-
-       priv->tuner = TUNER_NONE;
-
-       /* check FC0012 ID register; reg=00 val=a1 */
-       ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
-       if (ret == 0 && buf[0] == 0xa1) {
-               priv->tuner = TUNER_RTL2832_FC0012;
+       switch (priv->tuner) {
+       case TUNER_RTL2832_FC0012:
                rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
-               dev_info(&d->udev->dev, "%s: FC0012 tuner found",
-                               KBUILD_MODNAME);
-               goto found;
-       }
-
-       /* check FC0013 ID register; reg=00 val=a3 */
-       ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
-       if (ret == 0 && buf[0] == 0xa3) {
-               priv->tuner = TUNER_RTL2832_FC0013;
+               break;
+       case TUNER_RTL2832_FC0013:
                rtl2832_config = &rtl28xxu_rtl2832_fc0013_config;
-               dev_info(&d->udev->dev, "%s: FC0013 tuner found",
-                               KBUILD_MODNAME);
-               goto found;
-       }
-
-       /* check MT2266 ID register; reg=00 val=85 */
-       ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
-       if (ret == 0 && buf[0] == 0x85) {
-               priv->tuner = TUNER_RTL2832_MT2266;
-               /* TODO implement tuner */
-               dev_info(&d->udev->dev, "%s: MT2266 tuner found",
-                               KBUILD_MODNAME);
-               goto unsupported;
-       }
-
-       /* check FC2580 ID register; reg=01 val=56 */
-       ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
-       if (ret == 0 && buf[0] == 0x56) {
-               priv->tuner = TUNER_RTL2832_FC2580;
+               break;
+       case TUNER_RTL2832_FC2580:
                /* FIXME: do not abuse fc0012 settings */
                rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
-               dev_info(&d->udev->dev, "%s: FC2580 tuner found",
-                               KBUILD_MODNAME);
-               goto found;
-       }
-
-       /* check MT2063 ID register; reg=00 val=9e || 9c */
-       ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
-       if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
-               priv->tuner = TUNER_RTL2832_MT2063;
-               /* TODO implement tuner */
-               dev_info(&d->udev->dev, "%s: MT2063 tuner found",
-                               KBUILD_MODNAME);
-               goto unsupported;
-       }
-
-       /* check MAX3543 ID register; reg=00 val=38 */
-       ret = rtl28xxu_ctrl_msg(d, &req_max3543);
-       if (ret == 0 && buf[0] == 0x38) {
-               priv->tuner = TUNER_RTL2832_MAX3543;
-               /* TODO implement tuner */
-               dev_info(&d->udev->dev, "%s: MAX3534 tuner found",
-                               KBUILD_MODNAME);
-               goto unsupported;
-       }
-
-       /* check TUA9001 ID register; reg=7e val=2328 */
-       ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
-       if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
-               priv->tuner = TUNER_RTL2832_TUA9001;
+               break;
+       case TUNER_RTL2832_TUA9001:
                rtl2832_config = &rtl28xxu_rtl2832_tua9001_config;
-               dev_info(&d->udev->dev, "%s: TUA9001 tuner found",
-                               KBUILD_MODNAME);
-               goto found;
-       }
-
-       /* check MXL5007R ID register; reg=d9 val=14 */
-       ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
-       if (ret == 0 && buf[0] == 0x14) {
-               priv->tuner = TUNER_RTL2832_MXL5007T;
-               /* TODO implement tuner */
-               dev_info(&d->udev->dev, "%s: MXL5007T tuner found",
-                               KBUILD_MODNAME);
-               goto unsupported;
-       }
-
-       /* check E4000 ID register; reg=02 val=40 */
-       ret = rtl28xxu_ctrl_msg(d, &req_e4000);
-       if (ret == 0 && buf[0] == 0x40) {
-               priv->tuner = TUNER_RTL2832_E4000;
+               break;
+       case TUNER_RTL2832_E4000:
                /* FIXME: do not abuse fc0012 settings */
                rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
-               dev_info(&d->udev->dev, "%s: E4000 tuner found",
-                               KBUILD_MODNAME);
-               goto found;
-       }
-
-       /* check TDA18272 ID register; reg=00 val=c760  */
-       ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
-       if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
-               priv->tuner = TUNER_RTL2832_TDA18272;
-               /* TODO implement tuner */
-               dev_info(&d->udev->dev, "%s: TDA18272 tuner found",
-                               KBUILD_MODNAME);
-               goto unsupported;
-       }
-
-unsupported:
-       /* close demod I2C gate */
-       ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
-       if (ret)
-               goto err;
-
-       /* tuner not found */
-       dev_dbg(&d->udev->dev, "%s: No compatible tuner found\n", __func__);
-       ret = -ENODEV;
-       return ret;
-
-found:
-       /* close demod I2C gate */
-       ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
-       if (ret)
+               break;
+       default:
+               dev_err(&d->udev->dev, "%s: unknown tuner=%s\n",
+                               KBUILD_MODNAME, priv->tuner_name);
+               ret = -ENODEV;
                goto err;
+       }
 
        /* attach demodulator */
-       adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config,
-               &d->i2c_adap);
-               if (adap->fe[0] == NULL) {
-                       ret = -ENODEV;
-                       goto err;
-               }
+       adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config, &d->i2c_adap);
+       if (!adap->fe[0]) {
+               ret = -ENODEV;
+               goto err;
+       }
 
-       /* set fe callbacks */
+       /* set fe callback */
        adap->fe[0]->callback = rtl2832u_frontend_callback;
 
-       return ret;
-
+       return 0;
 err:
        dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
        return ret;
@@ -1304,6 +1300,7 @@ static const struct dvb_usb_device_properties rtl2832u_props = {
 
        .power_ctrl = rtl2832u_power_ctrl,
        .i2c_algo = &rtl28xxu_i2c_algo,
+       .read_config = rtl2832u_read_config,
        .frontend_attach = rtl2832u_frontend_attach,
        .tuner_attach = rtl2832u_tuner_attach,
        .init = rtl28xxu_init,
index c6c8a4fe0b32c389b6c9777fc1136846d91e5fee..2f3af2d3b6ce5ec365aab25093ea9b3c1994dcef 100644 (file)
@@ -53,6 +53,7 @@
 struct rtl28xxu_priv {
        u8 chip_id;
        u8 tuner;
+       char *tuner_name;
        u8 page; /* integrated demod active register page */
        bool rc_active;
 };