#include <linux/cpumask.h>
#include <linux/oprofile.h>
#include <asm/cell-pmu.h>
+#include <asm/cell-regs.h>
#include <asm/spu.h>
-#include "../../platforms/cell/cbe_regs.h"
-
/* Defines used for sync_start */
#define SKIP_GENERIC_SYNC 0
#define SYNC_START_ERROR -1
#include <asm/reg.h>
#include <asm/rtas.h>
#include <asm/system.h>
+#include <asm/cell-regs.h>
#include "../platforms/cell/interrupt.h"
-#include "../platforms/cell/cbe_regs.h"
#include "cell/pr_util.h"
static void cell_global_stop_spu(void);
#include <asm/machdep.h>
#include <asm/of_platform.h>
#include <asm/prom.h>
-#include "cbe_regs.h"
+#include <asm/cell-regs.h>
#include "cbe_cpufreq.h"
static DEFINE_MUTEX(cbe_switch_mutex);
#include <linux/time.h>
#include <asm/machdep.h>
#include <asm/hw_irq.h>
+#include <asm/cell-regs.h>
-#include "cbe_regs.h"
#include "cbe_cpufreq.h"
/* to write to MIC register */
#include <asm/processor.h>
#include <asm/prom.h>
#include <asm/pmi.h>
+#include <asm/cell-regs.h>
#ifdef DEBUG
#include <asm/time.h>
#endif
-#include "cbe_regs.h"
#include "cbe_cpufreq.h"
static u8 pmi_slow_mode_limit[MAX_CBE];
#include <asm/ptrace.h>
#include <asm/of_device.h>
#include <asm/of_platform.h>
-
-#include "cbe_regs.h"
+#include <asm/cell-regs.h>
/*
* Current implementation uses "cpu" nodes. We build our own mapping
+++ /dev/null
-/*
- * cbe_regs.h
- *
- * This file is intended to hold the various register definitions for CBE
- * on-chip system devices (memory controller, IO controller, etc...)
- *
- * (C) Copyright IBM Corporation 2001,2006
- *
- * Authors: Maximino Aguilar (maguilar@us.ibm.com)
- * David J. Erb (djerb@us.ibm.com)
- *
- * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
- */
-
-#ifndef CBE_REGS_H
-#define CBE_REGS_H
-
-#include <asm/cell-pmu.h>
-
-/*
- *
- * Some HID register definitions
- *
- */
-
-/* CBE specific HID0 bits */
-#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul
-#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul
-#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul
-#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul
-
-#define MAX_CBE 2
-
-/*
- *
- * Pervasive unit register definitions
- *
- */
-
-union spe_reg {
- u64 val;
- u8 spe[8];
-};
-
-union ppe_spe_reg {
- u64 val;
- struct {
- u32 ppe;
- u32 spe;
- };
-};
-
-
-struct cbe_pmd_regs {
- /* Debug Bus Control */
- u64 pad_0x0000; /* 0x0000 */
-
- u64 group_control; /* 0x0008 */
-
- u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */
-
- u64 debug_bus_control; /* 0x00a8 */
-
- u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */
-
- u64 trace_aux_data; /* 0x0100 */
- u64 trace_buffer_0_63; /* 0x0108 */
- u64 trace_buffer_64_127; /* 0x0110 */
- u64 trace_address; /* 0x0118 */
- u64 ext_tr_timer; /* 0x0120 */
-
- u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */
-
- /* Performance Monitor */
- u64 pm_status; /* 0x0400 */
- u64 pm_control; /* 0x0408 */
- u64 pm_interval; /* 0x0410 */
- u64 pm_ctr[4]; /* 0x0418 */
- u64 pm_start_stop; /* 0x0438 */
- u64 pm07_control[8]; /* 0x0440 */
-
- u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */
-
- /* Thermal Sensor Registers */
- union spe_reg ts_ctsr1; /* 0x0800 */
- u64 ts_ctsr2; /* 0x0808 */
- union spe_reg ts_mtsr1; /* 0x0810 */
- u64 ts_mtsr2; /* 0x0818 */
- union spe_reg ts_itr1; /* 0x0820 */
- u64 ts_itr2; /* 0x0828 */
- u64 ts_gitr; /* 0x0830 */
- u64 ts_isr; /* 0x0838 */
- u64 ts_imr; /* 0x0840 */
- union spe_reg tm_cr1; /* 0x0848 */
- u64 tm_cr2; /* 0x0850 */
- u64 tm_simr; /* 0x0858 */
- union ppe_spe_reg tm_tpr; /* 0x0860 */
- union spe_reg tm_str1; /* 0x0868 */
- u64 tm_str2; /* 0x0870 */
- union ppe_spe_reg tm_tsr; /* 0x0878 */
-
- /* Power Management */
- u64 pmcr; /* 0x0880 */
-#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000
- u64 pmsr; /* 0x0888 */
-
- /* Time Base Register */
- u64 tbr; /* 0x0890 */
-
- u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */
-
- /* Fault Isolation Registers */
- u64 checkstop_fir; /* 0x0c00 */
- u64 recoverable_fir; /* 0x0c08 */
- u64 spec_att_mchk_fir; /* 0x0c10 */
- u32 fir_mode_reg; /* 0x0c18 */
- u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */
-#define CBE_PMD_FIR_MODE_M8 0x00800
- u64 fir_enable_mask; /* 0x0c20 */
-
- u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */
- u64 ras_esc_0; /* 0x0ca8 */
- u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */
-};
-
-extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
-extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
-
-/*
- * PMU shadow registers
- *
- * Many of the registers in the performance monitoring unit are write-only,
- * so we need to save a copy of what we write to those registers.
- *
- * The actual data counters are read/write. However, writing to the counters
- * only takes effect if the PMU is enabled. Otherwise the value is stored in
- * a hardware latch until the next time the PMU is enabled. So we save a copy
- * of the counter values if we need to read them back while the PMU is
- * disabled. The counter_value_in_latch field is a bitmap indicating which
- * counters currently have a value waiting to be written.
- */
-
-struct cbe_pmd_shadow_regs {
- u32 group_control;
- u32 debug_bus_control;
- u32 trace_address;
- u32 ext_tr_timer;
- u32 pm_status;
- u32 pm_control;
- u32 pm_interval;
- u32 pm_start_stop;
- u32 pm07_control[NR_CTRS];
-
- u32 pm_ctr[NR_PHYS_CTRS];
- u32 counter_value_in_latch;
-};
-
-extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
-extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
-
-/*
- *
- * IIC unit register definitions
- *
- */
-
-struct cbe_iic_pending_bits {
- u32 data;
- u8 flags;
- u8 class;
- u8 source;
- u8 prio;
-};
-
-#define CBE_IIC_IRQ_VALID 0x80
-#define CBE_IIC_IRQ_IPI 0x40
-
-struct cbe_iic_thread_regs {
- struct cbe_iic_pending_bits pending;
- struct cbe_iic_pending_bits pending_destr;
- u64 generate;
- u64 prio;
-};
-
-struct cbe_iic_regs {
- u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */
-
- /* IIC interrupt registers */
- struct cbe_iic_thread_regs thread[2]; /* 0x0400 */
-
- u64 iic_ir; /* 0x0440 */
-#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12)
-#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
-#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
-#define CBE_IIC_IR_IOC_0 0x0
-#define CBE_IIC_IR_IOC_1S 0xb
-#define CBE_IIC_IR_PT_0 0xe
-#define CBE_IIC_IR_PT_1 0xf
-
- u64 iic_is; /* 0x0448 */
-#define CBE_IIC_IS_PMI 0x2
-
- u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */
-
- /* IOC FIR */
- u64 ioc_fir_reset; /* 0x0500 */
- u64 ioc_fir_set; /* 0x0508 */
- u64 ioc_checkstop_enable; /* 0x0510 */
- u64 ioc_fir_error_mask; /* 0x0518 */
- u64 ioc_syserr_enable; /* 0x0520 */
- u64 ioc_fir; /* 0x0528 */
-
- u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */
-};
-
-extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
-extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
-
-
-struct cbe_mic_tm_regs {
- u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */
-
- u64 mic_ctl_cnfg2; /* 0x0040 */
-#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL
-#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL
-#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL
-#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL
-
- u64 pad_0x0048; /* 0x0048 */
-
- u64 mic_aux_trc_base; /* 0x0050 */
- u64 mic_aux_trc_max_addr; /* 0x0058 */
- u64 mic_aux_trc_cur_addr; /* 0x0060 */
- u64 mic_aux_trc_grf_addr; /* 0x0068 */
- u64 mic_aux_trc_grf_data; /* 0x0070 */
-
- u64 pad_0x0078; /* 0x0078 */
-
- u64 mic_ctl_cnfg_0; /* 0x0080 */
-#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL
-
- u64 pad_0x0088; /* 0x0088 */
-
- u64 slow_fast_timer_0; /* 0x0090 */
- u64 slow_next_timer_0; /* 0x0098 */
-
- u8 pad_0x00a0_0x01c0[0x01c0 - 0x0a0]; /* 0x00a0 */
-
- u64 mic_ctl_cnfg_1; /* 0x01c0 */
-#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL
- u64 pad_0x01c8; /* 0x01c8 */
-
- u64 slow_fast_timer_1; /* 0x01d0 */
- u64 slow_next_timer_1; /* 0x01d8 */
-
- u8 pad_0x01e0_0x1000[0x1000 - 0x01e0]; /* 0x01e0 */
-};
-
-extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
-extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
-
-/* some utility functions to deal with SMT */
-extern u32 cbe_get_hw_thread_id(int cpu);
-extern u32 cbe_cpu_to_node(int cpu);
-extern u32 cbe_node_to_cpu(int node);
-
-/* Init this module early */
-extern void cbe_regs_init(void);
-
-
-#endif /* CBE_REGS_H */
#include <asm/spu.h>
#include <asm/io.h>
#include <asm/prom.h>
+#include <asm/cell-regs.h>
-#include "cbe_regs.h"
#include "spu_priv1_mmio.h"
#define TEMP_MIN 65
#include <asm/prom.h>
#include <asm/ptrace.h>
#include <asm/machdep.h>
+#include <asm/cell-regs.h>
#include "interrupt.h"
-#include "cbe_regs.h"
struct iic {
struct cbe_iic_thread_regs __iomem *regs;
#include <asm/udbg.h>
#include <asm/of_platform.h>
#include <asm/lmb.h>
+#include <asm/cell-regs.h>
-#include "cbe_regs.h"
#include "interrupt.h"
/* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages
#include <asm/prom.h>
#include <asm/pgtable.h>
#include <asm/reg.h>
+#include <asm/cell-regs.h>
#include "pervasive.h"
-#include "cbe_regs.h"
static int sysreset_hack;
#include <asm/pmc.h>
#include <asm/reg.h>
#include <asm/spu.h>
+#include <asm/cell-regs.h>
-#include "cbe_regs.h"
#include "interrupt.h"
/*
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/rtas.h>
+#include <asm/cell-regs.h>
#include "ras.h"
-#include "cbe_regs.h"
static void dump_fir(int cpu)
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <asm/of_platform.h>
+#include <asm/cell-regs.h>
#include "interrupt.h"
-#include "cbe_regs.h"
#include "pervasive.h"
#include "ras.h"
--- /dev/null
+/*
+ * cbe_regs.h
+ *
+ * This file is intended to hold the various register definitions for CBE
+ * on-chip system devices (memory controller, IO controller, etc...)
+ *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Authors: Maximino Aguilar (maguilar@us.ibm.com)
+ * David J. Erb (djerb@us.ibm.com)
+ *
+ * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ */
+
+#ifndef CBE_REGS_H
+#define CBE_REGS_H
+
+#include <asm/cell-pmu.h>
+
+/*
+ *
+ * Some HID register definitions
+ *
+ */
+
+/* CBE specific HID0 bits */
+#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul
+#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul
+#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul
+#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul
+
+#define MAX_CBE 2
+
+/*
+ *
+ * Pervasive unit register definitions
+ *
+ */
+
+union spe_reg {
+ u64 val;
+ u8 spe[8];
+};
+
+union ppe_spe_reg {
+ u64 val;
+ struct {
+ u32 ppe;
+ u32 spe;
+ };
+};
+
+
+struct cbe_pmd_regs {
+ /* Debug Bus Control */
+ u64 pad_0x0000; /* 0x0000 */
+
+ u64 group_control; /* 0x0008 */
+
+ u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */
+
+ u64 debug_bus_control; /* 0x00a8 */
+
+ u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */
+
+ u64 trace_aux_data; /* 0x0100 */
+ u64 trace_buffer_0_63; /* 0x0108 */
+ u64 trace_buffer_64_127; /* 0x0110 */
+ u64 trace_address; /* 0x0118 */
+ u64 ext_tr_timer; /* 0x0120 */
+
+ u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */
+
+ /* Performance Monitor */
+ u64 pm_status; /* 0x0400 */
+ u64 pm_control; /* 0x0408 */
+ u64 pm_interval; /* 0x0410 */
+ u64 pm_ctr[4]; /* 0x0418 */
+ u64 pm_start_stop; /* 0x0438 */
+ u64 pm07_control[8]; /* 0x0440 */
+
+ u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */
+
+ /* Thermal Sensor Registers */
+ union spe_reg ts_ctsr1; /* 0x0800 */
+ u64 ts_ctsr2; /* 0x0808 */
+ union spe_reg ts_mtsr1; /* 0x0810 */
+ u64 ts_mtsr2; /* 0x0818 */
+ union spe_reg ts_itr1; /* 0x0820 */
+ u64 ts_itr2; /* 0x0828 */
+ u64 ts_gitr; /* 0x0830 */
+ u64 ts_isr; /* 0x0838 */
+ u64 ts_imr; /* 0x0840 */
+ union spe_reg tm_cr1; /* 0x0848 */
+ u64 tm_cr2; /* 0x0850 */
+ u64 tm_simr; /* 0x0858 */
+ union ppe_spe_reg tm_tpr; /* 0x0860 */
+ union spe_reg tm_str1; /* 0x0868 */
+ u64 tm_str2; /* 0x0870 */
+ union ppe_spe_reg tm_tsr; /* 0x0878 */
+
+ /* Power Management */
+ u64 pmcr; /* 0x0880 */
+#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000
+ u64 pmsr; /* 0x0888 */
+
+ /* Time Base Register */
+ u64 tbr; /* 0x0890 */
+
+ u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */
+
+ /* Fault Isolation Registers */
+ u64 checkstop_fir; /* 0x0c00 */
+ u64 recoverable_fir; /* 0x0c08 */
+ u64 spec_att_mchk_fir; /* 0x0c10 */
+ u32 fir_mode_reg; /* 0x0c18 */
+ u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */
+#define CBE_PMD_FIR_MODE_M8 0x00800
+ u64 fir_enable_mask; /* 0x0c20 */
+
+ u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */
+ u64 ras_esc_0; /* 0x0ca8 */
+ u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */
+};
+
+extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
+extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
+
+/*
+ * PMU shadow registers
+ *
+ * Many of the registers in the performance monitoring unit are write-only,
+ * so we need to save a copy of what we write to those registers.
+ *
+ * The actual data counters are read/write. However, writing to the counters
+ * only takes effect if the PMU is enabled. Otherwise the value is stored in
+ * a hardware latch until the next time the PMU is enabled. So we save a copy
+ * of the counter values if we need to read them back while the PMU is
+ * disabled. The counter_value_in_latch field is a bitmap indicating which
+ * counters currently have a value waiting to be written.
+ */
+
+struct cbe_pmd_shadow_regs {
+ u32 group_control;
+ u32 debug_bus_control;
+ u32 trace_address;
+ u32 ext_tr_timer;
+ u32 pm_status;
+ u32 pm_control;
+ u32 pm_interval;
+ u32 pm_start_stop;
+ u32 pm07_control[NR_CTRS];
+
+ u32 pm_ctr[NR_PHYS_CTRS];
+ u32 counter_value_in_latch;
+};
+
+extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
+extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
+
+/*
+ *
+ * IIC unit register definitions
+ *
+ */
+
+struct cbe_iic_pending_bits {
+ u32 data;
+ u8 flags;
+ u8 class;
+ u8 source;
+ u8 prio;
+};
+
+#define CBE_IIC_IRQ_VALID 0x80
+#define CBE_IIC_IRQ_IPI 0x40
+
+struct cbe_iic_thread_regs {
+ struct cbe_iic_pending_bits pending;
+ struct cbe_iic_pending_bits pending_destr;
+ u64 generate;
+ u64 prio;
+};
+
+struct cbe_iic_regs {
+ u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */
+
+ /* IIC interrupt registers */
+ struct cbe_iic_thread_regs thread[2]; /* 0x0400 */
+
+ u64 iic_ir; /* 0x0440 */
+#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12)
+#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
+#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
+#define CBE_IIC_IR_IOC_0 0x0
+#define CBE_IIC_IR_IOC_1S 0xb
+#define CBE_IIC_IR_PT_0 0xe
+#define CBE_IIC_IR_PT_1 0xf
+
+ u64 iic_is; /* 0x0448 */
+#define CBE_IIC_IS_PMI 0x2
+
+ u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */
+
+ /* IOC FIR */
+ u64 ioc_fir_reset; /* 0x0500 */
+ u64 ioc_fir_set; /* 0x0508 */
+ u64 ioc_checkstop_enable; /* 0x0510 */
+ u64 ioc_fir_error_mask; /* 0x0518 */
+ u64 ioc_syserr_enable; /* 0x0520 */
+ u64 ioc_fir; /* 0x0528 */
+
+ u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */
+};
+
+extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
+extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
+
+
+struct cbe_mic_tm_regs {
+ u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */
+
+ u64 mic_ctl_cnfg2; /* 0x0040 */
+#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL
+#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL
+#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL
+#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL
+
+ u64 pad_0x0048; /* 0x0048 */
+
+ u64 mic_aux_trc_base; /* 0x0050 */
+ u64 mic_aux_trc_max_addr; /* 0x0058 */
+ u64 mic_aux_trc_cur_addr; /* 0x0060 */
+ u64 mic_aux_trc_grf_addr; /* 0x0068 */
+ u64 mic_aux_trc_grf_data; /* 0x0070 */
+
+ u64 pad_0x0078; /* 0x0078 */
+
+ u64 mic_ctl_cnfg_0; /* 0x0080 */
+#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL
+
+ u64 pad_0x0088; /* 0x0088 */
+
+ u64 slow_fast_timer_0; /* 0x0090 */
+ u64 slow_next_timer_0; /* 0x0098 */
+
+ u8 pad_0x00a0_0x01c0[0x01c0 - 0x0a0]; /* 0x00a0 */
+
+ u64 mic_ctl_cnfg_1; /* 0x01c0 */
+#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL
+ u64 pad_0x01c8; /* 0x01c8 */
+
+ u64 slow_fast_timer_1; /* 0x01d0 */
+ u64 slow_next_timer_1; /* 0x01d8 */
+
+ u8 pad_0x01e0_0x1000[0x1000 - 0x01e0]; /* 0x01e0 */
+};
+
+extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
+extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
+
+/* some utility functions to deal with SMT */
+extern u32 cbe_get_hw_thread_id(int cpu);
+extern u32 cbe_cpu_to_node(int cpu);
+extern u32 cbe_node_to_cpu(int node);
+
+/* Init this module early */
+extern void cbe_regs_init(void);
+
+
+#endif /* CBE_REGS_H */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff