Staging: iio: adis16300: fix some minor issues and clean-up
authorBarry Song <21cnbao@gmail.com>
Fri, 4 Jun 2010 09:19:52 +0000 (17:19 +0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 18 Jun 2010 22:16:19 +0000 (15:16 -0700)
1. add delay between spi transfers
2. move burst read to ring function
3. clean-up

Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/iio/imu/adis16300.h
drivers/staging/iio/imu/adis16300_core.c
drivers/staging/iio/imu/adis16300_ring.c

index 1c7ea5c840efd2b4f35d0d92742c8d444789768d..b050067d502b444a66161006a3a4f4eab0c0a022 100644 (file)
@@ -115,14 +115,8 @@ struct adis16300_state {
        struct mutex                    buf_lock;
 };
 
-int adis16300_spi_read_burst(struct device *dev, u8 *rx);
-
 int adis16300_set_irq(struct device *dev, bool enable);
 
-int adis16300_reset(struct device *dev);
-
-int adis16300_check_status(struct device *dev);
-
 #ifdef CONFIG_IIO_RING_BUFFER
 /* At the moment triggers are only used for ring buffer
  * filling. This may change!
index bf02fbedee9f9c297110b9febabf26cf5842065c..28667e8f26cde111c614c9f550daf7f9b7235a32 100644 (file)
 
 #define DRIVER_NAME            "adis16300"
 
-/* At the moment the spi framework doesn't allow global setting of cs_change.
- * It's in the likely to be added comment at the top of spi.h.
- * This means that use cannot be made of spi_write etc.
- */
+static int adis16300_check_status(struct device *dev);
 
 /**
  * adis16300_spi_write_reg_8() - write single byte to a register
@@ -79,11 +76,13 @@ static int adis16300_spi_write_reg_16(struct device *dev,
                        .bits_per_word = 8,
                        .len = 2,
                        .cs_change = 1,
+                       .delay_usecs = 75,
                }, {
                        .tx_buf = st->tx + 2,
                        .bits_per_word = 8,
                        .len = 2,
                        .cs_change = 1,
+                       .delay_usecs = 75,
                },
        };
 
@@ -122,12 +121,14 @@ static int adis16300_spi_read_reg_16(struct device *dev,
                        .tx_buf = st->tx,
                        .bits_per_word = 8,
                        .len = 2,
-                       .cs_change = 0,
+                       .cs_change = 1,
+                       .delay_usecs = 75,
                }, {
                        .rx_buf = st->rx,
                        .bits_per_word = 8,
                        .len = 2,
-                       .cs_change = 0,
+                       .cs_change = 1,
+                       .delay_usecs = 75,
                },
        };
 
@@ -154,54 +155,6 @@ error_ret:
        return ret;
 }
 
-/**
- * adis16300_spi_read_burst() - read all data registers
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
- * @rx: somewhere to pass back the value read (min size is 24 bytes)
- **/
-int adis16300_spi_read_burst(struct device *dev, u8 *rx)
-{
-       struct spi_message msg;
-       struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
-       u32 old_speed_hz = st->us->max_speed_hz;
-       int ret;
-
-       struct spi_transfer xfers[] = {
-               {
-                       .tx_buf = st->tx,
-                       .bits_per_word = 8,
-                       .len = 2,
-                       .cs_change = 0,
-               }, {
-                       .rx_buf = rx,
-                       .bits_per_word = 8,
-                       .len = 18,
-                       .cs_change = 0,
-               },
-       };
-
-       mutex_lock(&st->buf_lock);
-       st->tx[0] = ADIS16300_READ_REG(ADIS16300_GLOB_CMD);
-       st->tx[1] = 0;
-
-       spi_message_init(&msg);
-       spi_message_add_tail(&xfers[0], &msg);
-       spi_message_add_tail(&xfers[1], &msg);
-
-       st->us->max_speed_hz = min(ADIS16300_SPI_BURST, old_speed_hz);
-       spi_setup(st->us);
-
-       ret = spi_sync(st->us, &msg);
-       if (ret)
-               dev_err(&st->us->dev, "problem when burst reading");
-
-       st->us->max_speed_hz = old_speed_hz;
-       spi_setup(st->us);
-       mutex_unlock(&st->buf_lock);
-       return ret;
-}
-
 static ssize_t adis16300_spi_read_signed(struct device *dev,
                struct device_attribute *attr,
                char *buf,
@@ -240,6 +193,24 @@ static ssize_t adis16300_read_12bit_unsigned(struct device *dev,
        return sprintf(buf, "%u\n", val & 0x0FFF);
 }
 
+static ssize_t adis16300_read_14bit_unsigned(struct device *dev,
+               struct device_attribute *attr,
+               char *buf)
+{
+       int ret;
+       u16 val = 0;
+       struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+       ret = adis16300_spi_read_reg_16(dev, this_attr->address, &val);
+       if (ret)
+               return ret;
+
+       if (val & ADIS16300_ERROR_ACTIVE)
+               adis16300_check_status(dev);
+
+       return sprintf(buf, "%u\n", val & 0x3FFF);
+}
+
 static ssize_t adis16300_read_14bit_signed(struct device *dev,
                struct device_attribute *attr,
                char *buf)
@@ -356,6 +327,18 @@ static ssize_t adis16300_write_frequency(struct device *dev,
        return ret ? ret : len;
 }
 
+static int adis16300_reset(struct device *dev)
+{
+       int ret;
+       ret = adis16300_spi_write_reg_8(dev,
+                       ADIS16300_GLOB_CMD,
+                       ADIS16300_GLOB_CMD_SW_RESET);
+       if (ret)
+               dev_err(dev, "problem resetting device");
+
+       return ret;
+}
+
 static ssize_t adis16300_write_reset(struct device *dev,
                struct device_attribute *attr,
                const char *buf, size_t len)
@@ -371,8 +354,6 @@ static ssize_t adis16300_write_reset(struct device *dev,
        return -1;
 }
 
-
-
 int adis16300_set_irq(struct device *dev, bool enable)
 {
        int ret;
@@ -396,32 +377,37 @@ error_ret:
        return ret;
 }
 
-int adis16300_reset(struct device *dev)
+/* Power down the device */
+static int adis16300_stop_device(struct device *dev)
 {
        int ret;
-       ret = adis16300_spi_write_reg_8(dev,
-                       ADIS16300_GLOB_CMD,
-                       ADIS16300_GLOB_CMD_SW_RESET);
+       u16 val = ADIS16300_SLP_CNT_POWER_OFF;
+
+       ret = adis16300_spi_write_reg_16(dev, ADIS16300_SLP_CNT, val);
        if (ret)
-               dev_err(dev, "problem resetting device");
+               dev_err(dev, "problem with turning device off: SLP_CNT");
 
        return ret;
 }
 
-/* Power down the device */
-static int adis16300_stop_device(struct device *dev)
+static int adis16300_self_test(struct device *dev)
 {
        int ret;
-       u16 val = ADIS16300_SLP_CNT_POWER_OFF;
+       ret = adis16300_spi_write_reg_16(dev,
+                       ADIS16300_MSC_CTRL,
+                       ADIS16300_MSC_CTRL_MEM_TEST);
+       if (ret) {
+               dev_err(dev, "problem starting self test");
+               goto err_ret;
+       }
 
-       ret = adis16300_spi_write_reg_16(dev, ADIS16300_SLP_CNT, val);
-       if (ret)
-               dev_err(dev, "problem with turning device off: SLP_CNT");
+       adis16300_check_status(dev);
 
+err_ret:
        return ret;
 }
 
-int adis16300_check_status(struct device *dev)
+static int adis16300_check_status(struct device *dev)
 {
        u16 status;
        int ret;
@@ -483,6 +469,11 @@ static int adis16300_initial_setup(struct adis16300_state *st)
        }
 
        /* Do self test */
+       ret = adis16300_self_test(dev);
+       if (ret) {
+               dev_err(dev, "self test failure");
+               goto err_ret;
+       }
 
        /* Read status register to check the result */
        ret = adis16300_check_status(dev);
@@ -526,7 +517,7 @@ static IIO_DEV_ATTR_ACCEL_Z_OFFSET(S_IWUSR | S_IRUGO,
                adis16300_write_16bit,
                ADIS16300_ZACCL_OFF);
 
-static IIO_DEV_ATTR_IN_NAMED_RAW(supply, adis16300_read_14bit_signed,
+static IIO_DEV_ATTR_IN_NAMED_RAW(supply, adis16300_read_14bit_unsigned,
                           ADIS16300_SUPPLY_OUT);
 static IIO_CONST_ATTR(in_supply_scale, "0.00242");
 
@@ -548,7 +539,7 @@ static IIO_DEV_ATTR_INCLI_Y(adis16300_read_13bit_signed,
                ADIS16300_YINCLI_OUT);
 static IIO_CONST_ATTR(incli_scale, "0.044 d");
 
-static IIO_DEV_ATTR_TEMP_RAW(adis16300_read_12bit_signed);
+static IIO_DEV_ATTR_TEMP_RAW(adis16300_read_12bit_unsigned);
 static IIO_CONST_ATTR(temp_offset, "198.16 K");
 static IIO_CONST_ATTR(temp_scale, "0.14 K");
 
@@ -659,15 +650,7 @@ static int __devinit adis16300_probe(struct spi_device *spi)
                goto error_unreg_ring_funcs;
        }
 
-       if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
-#if 0 /* fixme: here we should support */
-               iio_init_work_cont(&st->work_cont_thresh,
-                               NULL,
-                               adis16300_thresh_handler_bh_no_check,
-                               0,
-                               0,
-                               st);
-#endif
+       if (spi->irq) {
                ret = iio_register_interrupt_line(spi->irq,
                                st->indio_dev,
                                0,
@@ -688,10 +671,9 @@ static int __devinit adis16300_probe(struct spi_device *spi)
        return 0;
 
 error_remove_trigger:
-       if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
-               adis16300_remove_trigger(st->indio_dev);
+       adis16300_remove_trigger(st->indio_dev);
 error_unregister_line:
-       if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
+       if (spi->irq)
                iio_unregister_interrupt_line(st->indio_dev, 0);
 error_uninitialize_ring:
        adis16300_uninitialize_ring(st->indio_dev->ring);
@@ -712,7 +694,6 @@ error_ret:
        return ret;
 }
 
-/* fixme, confirm ordering in this function */
 static int adis16300_remove(struct spi_device *spi)
 {
        int ret;
@@ -726,12 +707,12 @@ static int adis16300_remove(struct spi_device *spi)
        flush_scheduled_work();
 
        adis16300_remove_trigger(indio_dev);
-       if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
+       if (spi->irq)
                iio_unregister_interrupt_line(indio_dev, 0);
 
        adis16300_uninitialize_ring(indio_dev->ring);
-       adis16300_unconfigure_ring(indio_dev);
        iio_device_unregister(indio_dev);
+       adis16300_unconfigure_ring(indio_dev);
        kfree(st->tx);
        kfree(st->rx);
        kfree(st);
index 9c01994f40d43b7ea733d6baf0f9750fe776b3b8..17ceb72e0bfe72d903512362a8bb0818aab5c56c 100644 (file)
@@ -27,7 +27,7 @@ static inline u16 combine_8_to_16(u8 lower, u8 upper)
        return _lower | (_upper << 8);
 }
 
-static IIO_SCAN_EL_C(supply, ADIS16300_SCAN_SUPPLY, IIO_SIGNED(14),
+static IIO_SCAN_EL_C(supply, ADIS16300_SCAN_SUPPLY, IIO_UNSIGNED(14),
                     ADIS16300_SUPPLY_OUT, NULL);
 
 static IIO_SCAN_EL_C(gyro_x, ADIS16300_SCAN_GYRO_X, IIO_SIGNED(14),
@@ -40,9 +40,9 @@ static IIO_SCAN_EL_C(accel_y, ADIS16300_SCAN_ACC_Y, IIO_SIGNED(14),
 static IIO_SCAN_EL_C(accel_z, ADIS16300_SCAN_ACC_Z, IIO_SIGNED(14),
                     ADIS16300_ZACCL_OUT, NULL);
 
-static IIO_SCAN_EL_C(temp, ADIS16300_SCAN_TEMP, IIO_SIGNED(12),
+static IIO_SCAN_EL_C(temp, ADIS16300_SCAN_TEMP, IIO_UNSIGNED(12),
                     ADIS16300_TEMP_OUT, NULL);
-static IIO_SCAN_EL_C(adc_0, ADIS16300_SCAN_ADC_0, IIO_SIGNED(12),
+static IIO_SCAN_EL_C(adc_0, ADIS16300_SCAN_ADC_0, IIO_UNSIGNED(12),
                     ADIS16300_AUX_ADC, NULL);
 
 static IIO_SCAN_EL_C(incli_x, ADIS16300_SCAN_INCLI_X, IIO_SIGNED(12),
@@ -88,6 +88,54 @@ static void adis16300_poll_func_th(struct iio_dev *indio_dev)
         */
 }
 
+/**
+ * adis16300_spi_read_burst() - read all data registers
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @rx: somewhere to pass back the value read (min size is 24 bytes)
+ **/
+static int adis16300_spi_read_burst(struct device *dev, u8 *rx)
+{
+       struct spi_message msg;
+       struct iio_dev *indio_dev = dev_get_drvdata(dev);
+       struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
+       u32 old_speed_hz = st->us->max_speed_hz;
+       int ret;
+
+       struct spi_transfer xfers[] = {
+               {
+                       .tx_buf = st->tx,
+                       .bits_per_word = 8,
+                       .len = 2,
+                       .cs_change = 0,
+               }, {
+                       .rx_buf = rx,
+                       .bits_per_word = 8,
+                       .len = 18,
+                       .cs_change = 0,
+               },
+       };
+
+       mutex_lock(&st->buf_lock);
+       st->tx[0] = ADIS16300_READ_REG(ADIS16300_GLOB_CMD);
+       st->tx[1] = 0;
+
+       spi_message_init(&msg);
+       spi_message_add_tail(&xfers[0], &msg);
+       spi_message_add_tail(&xfers[1], &msg);
+
+       st->us->max_speed_hz = ADIS16300_SPI_BURST;
+       spi_setup(st->us);
+
+       ret = spi_sync(st->us, &msg);
+       if (ret)
+               dev_err(&st->us->dev, "problem when burst reading");
+
+       st->us->max_speed_hz = old_speed_hz;
+       spi_setup(st->us);
+       mutex_unlock(&st->buf_lock);
+       return ret;
+}
+
 /* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device
  * specific to be rolled into the core.
  */