dt/bindings: display: Add DT bindings for Mali Display Processors.

Add DT bindings documentation for the Mali Display Processor. The bindings
describe the Mali DP500, DP550 and DP650 processors from ARM Ltd.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
new file mode 100644 (file)
index 0000000..2f78709
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
@@ -0,0 +1,65 @@
+ARM Mali-DP
+
+The following bindings apply to a family of Display Processors sold as
+licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+DP650 processors that offer multiple composition layers, support for
+rotation and scaling output.
+
+Required properties:
+  - compatible: should be one of
+       "arm,mali-dp500"
+       "arm,mali-dp550"
+       "arm,mali-dp650"
+    depending on the particular implementation present in the hardware
+  - reg: Physical base address and size of the block of registers used by
+    the processor.
+  - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
+    interrupt client nodes.
+  - interrupt-names: name of the engine inside the processor that will
+    use the corresponding interrupt. Should be one of "DE" or "SE".
+  - clocks: A list of phandle + clock-specifier pairs, one for each entry
+    in 'clock-names'
+  - clock-names: A list of clock names. It should contain:
+      - "pclk": for the APB interface clock
+      - "aclk": for the AXI interface clock
+      - "mclk": for the main processor clock
+      - "pxlclk": for the pixel clock feeding the output PLL of the processor.
+  - arm,malidp-output-port-lines: Array of u8 values describing the number
+    of output lines per channel (R, G and B).
+
+Required sub-nodes:
+  - port: The Mali DP connection to an encoder input port. The connection
+    is modelled using the OF graph bindings specified in
+    Documentation/devicetree/bindings/graph.txt
+
+Optional properties:
+  - memory-region: phandle to a node describing memory (see
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+    to be used for the framebuffer; if not present, the framebuffer may
+    be located anywhere in memory.
+
+
+Example:
+
+/ {
+       ...
+
+       dp0: malidp@6f200000 {
+               compatible = "arm,mali-dp650";
+               reg = <0 0x6f200000 0 0x20000>;
+               memory-region = <&display_reserved>;
+               interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 168 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "DE", "SE";
+               clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+               clock-names = "pxlclk", "mclk", "aclk", "pclk";
+               arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+               port {
+                       dp0_output: endpoint {
+                               remote-endpoint = <&tda998x_2_input>;
+                       };
+               };
+       };
+
+       ...
+};