Lattice ECP3 FPGA: Correct endianness
authorJean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Thu, 24 Jul 2014 08:53:00 +0000 (10:53 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sun, 27 Jul 2014 18:10:42 +0000 (11:10 -0700)
This code corrects endianness and avoids a sparse error.
Tested with Lattice ECP3-35 with Freescale i.MX6.
It also sends uevent in order to load it.

Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/misc/lattice-ecp3-config.c

index 0a1565e63c711eaf10f13c78ffa6c97a5ace9574..7ffdb589841ed2fe2e25ec2580218e4dfd07a2a2 100644 (file)
@@ -15,6 +15,7 @@
 #include <linux/spi/spi.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <asm/unaligned.h>
 
 #define FIRMWARE_NAME  "lattice-ecp3.bit"
 
@@ -91,8 +92,8 @@ static void firmware_load(const struct firmware *fw, void *context)
        /* Trying to speak with the FPGA via SPI... */
        txbuf[0] = FPGA_CMD_READ_ID;
        ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
-       dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", *(u32 *)&rxbuf[4]);
-       jedec_id = *(u32 *)&rxbuf[4];
+       jedec_id = get_unaligned_be32(&rxbuf[4]);
+       dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", jedec_id);
 
        for (i = 0; i < ARRAY_SIZE(ecp3_dev); i++) {
                if (jedec_id == ecp3_dev[i].jedec_id)
@@ -109,7 +110,8 @@ static void firmware_load(const struct firmware *fw, void *context)
 
        txbuf[0] = FPGA_CMD_READ_STATUS;
        ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
-       dev_dbg(&spi->dev, "FPGA Status=%08x\n", *(u32 *)&rxbuf[4]);
+       status = get_unaligned_be32(&rxbuf[4]);
+       dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);
 
        buffer = kzalloc(fw->size + 8, GFP_KERNEL);
        if (!buffer) {
@@ -141,7 +143,7 @@ static void firmware_load(const struct firmware *fw, void *context)
        for (i = 0; i < FPGA_CLEAR_LOOP_COUNT; i++) {
                txbuf[0] = FPGA_CMD_READ_STATUS;
                ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
-               status = *(u32 *)&rxbuf[4];
+               status = get_unaligned_be32(&rxbuf[4]);
                if (status == FPGA_STATUS_CLEARED)
                        break;
 
@@ -164,8 +166,8 @@ static void firmware_load(const struct firmware *fw, void *context)
 
        txbuf[0] = FPGA_CMD_READ_STATUS;
        ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
-       dev_dbg(&spi->dev, "FPGA Status=%08x\n", *(u32 *)&rxbuf[4]);
-       status = *(u32 *)&rxbuf[4];
+       status = get_unaligned_be32(&rxbuf[4]);
+       dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);
 
        /* Check result */
        if (status & FPGA_STATUS_DONE)
@@ -196,7 +198,7 @@ static int lattice_ecp3_probe(struct spi_device *spi)
        spi_set_drvdata(spi, data);
 
        init_completion(&data->fw_loaded);
-       err = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG,
+       err = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
                                      FIRMWARE_NAME, &spi->dev,
                                      GFP_KERNEL, spi, firmware_load);
        if (err) {