There's no need to have these defines in plat/io.h.
Note that we now need to ifdef omap_read/write calls
as they will be available for omap1 only.
While at it, clean up the includes to group them like
they typically are grouped.
Signed-off-by: Tony Lindgren <tony@atomide.com>
#include <plat/clkdev_omap.h>
+#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include <plat/clock.h>
+#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm2xxx_3xxx.h"
#include <plat/clkdev_omap.h>
+#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include <linux/clk.h>
#include <linux/list.h>
+#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "iomap.h"
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "clock36xx.h"
#include "clock3517.h"
-
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk.h>
+
+#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "iomap.h"
#include "clock.h"
#include "clock44xx.h"
#include "cm1_44xx.h"
#include <linux/err.h>
#include <linux/io.h>
+#include "iomap.h"
#include "common.h"
-
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include <linux/err.h>
#include <linux/io.h>
+#include "iomap.h"
#include "common.h"
-
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include <linux/err.h>
#include <linux/io.h>
+#include "iomap.h"
#include "common.h"
-
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include <linux/clk.h>
#include <linux/io.h>
-#include "common.h"
#include <plat/board.h>
#include <plat/mux.h>
-
#include <plat/clock.h>
+#include "iomap.h"
+#include "common.h"
#include "sdrc.h"
#include "control.h"
#include <linux/kernel.h>
#include <linux/io.h>
-#include "common.h"
#include <plat/sdrc.h>
+#include "iomap.h"
+#include "common.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
-#include <mach/io.h>
#include <mach/ctrl_module_core_44xx.h>
#include <mach/ctrl_module_wkup_44xx.h>
#include <mach/ctrl_module_pad_core_44xx.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
-#include <plat/tc.h>
+#include "iomap.h"
#include <plat/board.h>
#include <plat/mcbsp.h>
#include <plat/mmc.h>
#include <plat/omap-pm.h>
#include "common.h"
+#include "iomap.h"
#include "mux.h"
#include "control.h"
#include "display.h"
#include <linux/clk.h>
#include <linux/err.h>
+#include "iomap.h"
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alexander Shishkin");
#include <linux/omapfb.h>
#include <asm/tlb.h>
-
#include <asm/mach/map.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include <plat/serial.h>
-
-#include "clock2xxx.h"
-#include "clock3xxx.h"
-#include "clock44xx.h"
-
-#include "common.h"
#include <plat/omap-pm.h>
+#include <plat/omap_hwmod.h>
+#include <plat/multi.h>
+
+#include "iomap.h"
#include "voltage.h"
#include "powerdomain.h"
-
#include "clockdomain.h"
-#include <plat/omap_hwmod.h>
-#include <plat/multi.h>
#include "common.h"
+#include "clock2xxx.h"
+#include "clock3xxx.h"
+#include "clock44xx.h"
/*
* The machine specific code may provide the extra mapping besides the
--- /dev/null
+/*
+ * IO mappings for OMAP2+
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x) (x)
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
+#endif
+
+#define OMAP2_L3_IO_OFFSET 0x90000000
+#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
+
+#define OMAP2_L4_IO_OFFSET 0xb2000000
+#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
+
+#define OMAP4_L3_IO_OFFSET 0xb4000000
+#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+
+#define AM33XX_L4_WK_IO_OFFSET 0xb5000000
+#define AM33XX_L4_WK_IO_ADDRESS(pa) IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET)
+
+#define OMAP4_L3_PER_IO_OFFSET 0xb1100000
+#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
+
+#define OMAP4_GPMC_IO_OFFSET 0xa9000000
+#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
+
+#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
+#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap2 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
+#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
+#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
+#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
+
+#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
+#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WK_243X_SIZE SZ_1M
+#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE
+#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+ /* 0x6e000000 --> 0xfe000000 */
+#define OMAP243X_GPMC_SIZE SZ_1M
+#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
+ /* 0x6D000000 --> 0xfd000000 */
+#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP243X_SDRC_SIZE SZ_1M
+#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
+ /* 0x6c000000 --> 0xfc000000 */
+#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP243X_SMS_SIZE SZ_1M
+
+/* 2420 IVA */
+#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE
+ /* 0x58000000 --> 0xfc100000 */
+#define DSP_MEM_2420_VIRT 0xfc100000
+#define DSP_MEM_2420_SIZE 0x28000
+#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE
+ /* 0x59000000 --> 0xfc128000 */
+#define DSP_IPI_2420_VIRT 0xfc128000
+#define DSP_IPI_2420_SIZE SZ_4K
+#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE
+ /* 0x5a000000 --> 0xfc129000 */
+#define DSP_MMU_2420_VIRT 0xfc129000
+#define DSP_MMU_2420_SIZE SZ_4K
+
+/* 2430 IVA2.1 - currently unmapped */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap3 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */
+#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
+#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */
+#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * ----------------------------------------------------------------------------
+ * AM33XX specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+#define L4_WK_AM33XX_PHYS L4_WK_AM33XX_BASE
+#define L4_WK_AM33XX_VIRT (L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET)
+#define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_PER_34XX_PHYS L4_PER_34XX_BASE
+ /* 0x49000000 --> 0xfb000000 */
+#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_34XX_SIZE SZ_1M
+
+#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE
+ /* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_34XX_SIZE SZ_8M
+
+#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE
+ /* 0x6e000000 --> 0xfe000000 */
+#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP34XX_GPMC_SIZE SZ_1M
+
+#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE
+ /* 0x6c000000 --> 0xfc000000 */
+#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP343X_SMS_SIZE SZ_1M
+
+#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE
+ /* 0x6D000000 --> 0xfd000000 */
+#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP343X_SDRC_SIZE SZ_1M
+
+/* 3430 IVA - currently unmapped */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap4 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */
+#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
+#define L3_44XX_SIZE SZ_1M
+
+#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */
+#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_44XX_SIZE SZ_4M
+
+#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
+ /* 0x48000000 --> 0xfa000000 */
+#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_44XX_SIZE SZ_4M
+
+#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE
+ /* 0x49000000 --> 0xfb000000 */
+#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_ABE_44XX_SIZE SZ_1M
+
+#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
+ /* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_44XX_SIZE SZ_8M
+
+#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
+ /* 0x50000000 --> 0xf9000000 */
+#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
+#define OMAP44XX_GPMC_SIZE SZ_1M
+
+
+#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE
+ /* 0x4c000000 --> 0xfd100000 */
+#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF1_SIZE SZ_1M
+
+#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
+ /* 0x4d000000 --> 0xfd200000 */
+#define OMAP44XX_EMIF2_SIZE SZ_1M
+#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
+
+#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
+ /* 0x4e000000 --> 0xfd300000 */
+#define OMAP44XX_DMM_SIZE SZ_1M
+#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+
#include <asm/exception.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+
+#include "iomap.h"
/* selected INTC register offsets */
#include <asm/cacheflush.h>
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
+
#include <mach/hardware.h>
#include <mach/omap-secure.h>
+#include "iomap.h"
#include "common.h"
-
#include "clockdomain.h"
/* SCU base address */
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
-#include <mach/irqs.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/dma.h>
#include <plat/board.h>
+#include <mach/irqs.h>
+
+#include "iomap.h"
#include "common.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "sdrc.h"
#include "pm.h"
#include "control.h"
-
#include "powerdomain.h"
#include "clockdomain.h"
#include <linux/err.h>
#include <linux/io.h>
+#include "iomap.h"
#include "common.h"
-
#include "prcm_mpu44xx.h"
#include "cm-regbits-44xx.h"
#include <linux/err.h>
#include <linux/io.h>
-#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include "iomap.h"
+#include "common.h"
#include "vp.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include <linux/err.h>
#include <linux/io.h>
+#include "iomap.h"
#include "common.h"
-
#include "prm44xx.h"
#include "prminst44xx.h"
#include "prm-regbits-44xx.h"
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/io.h>
#include "common.h"
#include <plat/clock.h>
#include <plat/sdrc.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include "common.h"
#include <plat/clock.h>
#include <plat/sram.h>
+#include <plat/sdrc.h>
+#include "iomap.h"
+#include "common.h"
#include "prm2xxx_3xxx.h"
#include "clock.h"
-#include <plat/sdrc.h>
#include "sdrc.h"
/* Memory timing, DLL mode flags */
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/io.h>
#include <plat/omap24xx.h>
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
+
#include <asm/assembler.h>
+
#include <plat/sram.h>
-#include <mach/io.h>
+#include "iomap.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "sdrc.h"
* These crashes may be intermittent.
*/
#include <linux/linkage.h>
+
#include <asm/assembler.h>
-#include <mach/io.h>
+
#include <mach/hardware.h>
+#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "sdrc.h"
* These crashes may be intermittent.
*/
#include <linux/linkage.h>
+
#include <asm/assembler.h>
-#include <mach/io.h>
+
#include <mach/hardware.h>
+#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "sdrc.h"
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
+
#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/io.h>
+#include <mach/hardware.h>
+#include "iomap.h"
#include "sdrc.h"
#include "cm2xxx_3xxx.h"
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
-#define OMAP2_L3_IO_OFFSET 0x90000000
-#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
-
-
-#define OMAP2_L4_IO_OFFSET 0xb2000000
-#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
-
-#define OMAP4_L3_IO_OFFSET 0xb4000000
-#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
-
-#define AM33XX_L4_WK_IO_OFFSET 0xb5000000
-#define AM33XX_L4_WK_IO_ADDRESS(pa) IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET)
-
-#define OMAP4_L3_PER_IO_OFFSET 0xb1100000
-#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
-
-#define OMAP4_GPMC_IO_OFFSET 0xa9000000
-#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
-
-#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
-#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
-
-/*
- * ----------------------------------------------------------------------------
- * Omap2 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
-#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
-#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
-#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
-
-#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
-#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_243X_SIZE SZ_1M
-#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE
-#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
- /* 0x6e000000 --> 0xfe000000 */
-#define OMAP243X_GPMC_SIZE SZ_1M
-#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
- /* 0x6D000000 --> 0xfd000000 */
-#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SDRC_SIZE SZ_1M
-#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
- /* 0x6c000000 --> 0xfc000000 */
-#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SMS_SIZE SZ_1M
-
-/* 2420 IVA */
-#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE
- /* 0x58000000 --> 0xfc100000 */
-#define DSP_MEM_2420_VIRT 0xfc100000
-#define DSP_MEM_2420_SIZE 0x28000
-#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE
- /* 0x59000000 --> 0xfc128000 */
-#define DSP_IPI_2420_VIRT 0xfc128000
-#define DSP_IPI_2420_SIZE SZ_4K
-#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE
- /* 0x5a000000 --> 0xfc129000 */
-#define DSP_MMU_2420_VIRT 0xfc129000
-#define DSP_MMU_2420_SIZE SZ_4K
-
-/* 2430 IVA2.1 - currently unmapped */
-
-/*
- * ----------------------------------------------------------------------------
- * Omap3 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */
-#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
-#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */
-#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * ----------------------------------------------------------------------------
- * AM33XX specific IO mapping
- * ----------------------------------------------------------------------------
- */
-#define L4_WK_AM33XX_PHYS L4_WK_AM33XX_BASE
-#define L4_WK_AM33XX_VIRT (L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET)
-#define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_PER_34XX_PHYS L4_PER_34XX_BASE
- /* 0x49000000 --> 0xfb000000 */
-#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_PER_34XX_SIZE SZ_1M
-
-#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE
- /* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_34XX_SIZE SZ_8M
-
-#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE
- /* 0x6e000000 --> 0xfe000000 */
-#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP34XX_GPMC_SIZE SZ_1M
-
-#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE
- /* 0x6c000000 --> 0xfc000000 */
-#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP343X_SMS_SIZE SZ_1M
-
-#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE
- /* 0x6D000000 --> 0xfd000000 */
-#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP343X_SDRC_SIZE SZ_1M
-
-/* 3430 IVA - currently unmapped */
-
-/*
- * ----------------------------------------------------------------------------
- * Omap4 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */
-#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
-#define L3_44XX_SIZE SZ_1M
-
-#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */
-#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_44XX_SIZE SZ_4M
-
-#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
- /* 0x48000000 --> 0xfa000000 */
-#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_PER_44XX_SIZE SZ_4M
-
-#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE
- /* 0x49000000 --> 0xfb000000 */
-#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_ABE_44XX_SIZE SZ_1M
-
-#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
- /* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_44XX_SIZE SZ_8M
-
-#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
- /* 0x50000000 --> 0xf9000000 */
-#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
-#define OMAP44XX_GPMC_SIZE SZ_1M
-
-
-#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE
- /* 0x4c000000 --> 0xfd100000 */
-#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
-#define OMAP44XX_EMIF1_SIZE SZ_1M
-
-#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
- /* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_SIZE SZ_1M
-#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
-
-#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
- /* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_SIZE SZ_1M
-#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
/*
* ----------------------------------------------------------------------------
* Omap specific register access
* from NOR flash (using external chipselect 3) rather than mask ROM,
* which uses BM to interchange the physical CS0 and CS3 addresses.
*/
-static inline u32 omap_cs0_phys(void)
+#ifdef CONFIG_ARCH_OMAP1
+static inline u32 omap_cs0m_phys(void)
{
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? OMAP_CS3_PHYS : 0;
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? 0 : OMAP_CS3_PHYS;
}
+#endif
#endif /* __ASSEMBLER__ */
#include "sram.h"
-/* XXX These "sideways" includes are a sign that something is wrong */
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-# include "../mach-omap2/prm2xxx_3xxx.h"
-# include "../mach-omap2/sdrc.h"
-#endif
+/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
+#include "../mach-omap2/iomap.h"
+#include "../mach-omap2/prm2xxx_3xxx.h"
+#include "../mach-omap2/sdrc.h"
#define OMAP1_SRAM_PA 0x20000000
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff