mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD
authorOhad Ben-Cohen <ohad@wizery.com>
Fri, 19 Nov 2010 07:29:09 +0000 (09:29 +0200)
committerChris Ball <cjb@laptop.org>
Fri, 19 Nov 2010 22:07:01 +0000 (17:07 -0500)
Some board/card/host configurations are not capable of powering off the
card after boot.

To support such configurations, and to allow smoother transition to
runtime PM behavior, MMC_CAP_POWER_OFF_CARD is added, so hosts need to
explicitly indicate whether it's OK to power off their cards after boot.

SDIO core will enable runtime PM for a card only if that cap is set.
As a result, the card will be powered down after boot, and will only
be powered up again when a driver is loaded (and then it's up to the
driver to decide whether power will be kept or not).

This will prevent sdio_bus_probe() failures with setups that do not
support powering off the card.

Reported-and-tested-by: Daniel Drake <dsd@laptop.org>
Reported-and-tested-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
drivers/mmc/core/sdio.c
drivers/mmc/core/sdio_bus.c
include/linux/mmc/host.h

index 42a949b723b849afe8680c9b47fd2f1f52b3dc66..efef5f94ac429081c5211a984a100b575c5fd986 100644 (file)
@@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host)
        BUG_ON(!host->card);
 
        /* Make sure card is powered before detecting it */
-       err = pm_runtime_get_sync(&host->card->dev);
-       if (err < 0)
-               goto out;
+       if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+               err = pm_runtime_get_sync(&host->card->dev);
+               if (err < 0)
+                       goto out;
+       }
 
        mmc_claim_host(host);
 
@@ -571,7 +573,8 @@ static void mmc_sdio_detect(struct mmc_host *host)
         * is about to show up at this point, the _sync variant is
         * desirable anyway.
         */
-       pm_runtime_put_sync(&host->card->dev);
+       if (host->caps & MMC_CAP_POWER_OFF_CARD)
+               pm_runtime_put_sync(&host->card->dev);
 
 out:
        if (err) {
@@ -728,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
        card = host->card;
 
        /*
-        * Let runtime PM core know our card is active
+        * Enable runtime PM only if supported by host+card+board
         */
-       err = pm_runtime_set_active(&card->dev);
-       if (err)
-               goto remove;
+       if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+               /*
+                * Let runtime PM core know our card is active
+                */
+               err = pm_runtime_set_active(&card->dev);
+               if (err)
+                       goto remove;
 
-       /*
-        * Enable runtime PM for this card
-        */
-       pm_runtime_enable(&card->dev);
+               /*
+                * Enable runtime PM for this card
+                */
+               pm_runtime_enable(&card->dev);
+       }
 
        /*
         * The number of functions on the card is encoded inside
@@ -755,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
                        goto remove;
 
                /*
-                * Enable Runtime PM for this func
+                * Enable Runtime PM for this func (if supported)
                 */
-               pm_runtime_enable(&card->sdio_func[i]->dev);
+               if (host->caps & MMC_CAP_POWER_OFF_CARD)
+                       pm_runtime_enable(&card->sdio_func[i]->dev);
        }
 
        mmc_release_host(host);
index 2716c7ab6bbfb6fd76ae2ff3084f7d61b4dcc198..203da443e339a65b90e1ff47bc5240f9ba2ca07e 100644 (file)
@@ -17,6 +17,7 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/sdio_func.h>
 
 #include "sdio_cis.h"
@@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev)
         * it should call pm_runtime_put_noidle() in its probe routine and
         * pm_runtime_get_noresume() in its remove routine.
         */
-       ret = pm_runtime_get_sync(dev);
-       if (ret < 0)
-               goto out;
+       if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+               ret = pm_runtime_get_sync(dev);
+               if (ret < 0)
+                       goto out;
+       }
 
        /* Set the default block size so the driver is sure it's something
         * sensible. */
@@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev)
        return 0;
 
 disable_runtimepm:
-       pm_runtime_put_noidle(dev);
+       if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+               pm_runtime_put_noidle(dev);
 out:
        return ret;
 }
@@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev)
 {
        struct sdio_driver *drv = to_sdio_driver(dev->driver);
        struct sdio_func *func = dev_to_sdio_func(dev);
-       int ret;
+       int ret = 0;
 
        /* Make sure card is powered before invoking ->remove() */
-       ret = pm_runtime_get_sync(dev);
-       if (ret < 0)
-               goto out;
+       if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+               ret = pm_runtime_get_sync(dev);
+               if (ret < 0)
+                       goto out;
+       }
 
        drv->remove(func);
 
@@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev)
        }
 
        /* First, undo the increment made directly above */
-       pm_runtime_put_noidle(dev);
+       if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+               pm_runtime_put_noidle(dev);
 
        /* Then undo the runtime PM settings in sdio_bus_probe() */
-       pm_runtime_put_noidle(dev);
+       if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+               pm_runtime_put_noidle(dev);
 
 out:
        return ret;
@@ -191,6 +199,8 @@ out:
 
 static int sdio_bus_pm_prepare(struct device *dev)
 {
+       struct sdio_func *func = dev_to_sdio_func(dev);
+
        /*
         * Resume an SDIO device which was suspended at run time at this
         * point, in order to allow standard SDIO suspend/resume paths
@@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev)
         * since there is little point in failing system suspend if a
         * device can't be resumed.
         */
-       pm_runtime_resume(dev);
+       if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+               pm_runtime_resume(dev);
 
        return 0;
 }
index 6d87f68ce4b6b70b8ff573f3e73e2550e9ca4acb..30f6fad99a58bb7f3a42e51606269a019826fbaa 100644 (file)
@@ -168,6 +168,7 @@ struct mmc_host {
                                                /* DDR mode at 1.8V */
 #define MMC_CAP_1_2V_DDR       (1 << 12)       /* can support */
                                                /* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD (1 << 13)       /* Can power off after boot */
 
        mmc_pm_flag_t           pm_caps;        /* supported pm features */