drm/i915: rip out pre-DDI stuff from haswell_crtc_mode_set
authorDaniel Vetter <daniel.vetter@ffwll.ch>
Thu, 6 Dec 2012 13:24:21 +0000 (14:24 +0100)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Thu, 6 Dec 2012 13:24:21 +0000 (14:24 +0100)
Especially getting rid of all things lvds is ... great!

v2: Drop the two additional pre-hsw hunks noticed by Paulo Zanoni.

v3:
- handle DP ports correctly (spoted by Paulo)
- don't leave {} behind for a single-line block (again spotted by
  Paulo)
- kill another if (IBX || CPT) block

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_display.c

index 093a163d4b1c9df512ef34740929f6b1b3ab9d06..5865cd9ddc3aec2c50c16a71f3129ed61cd32117 100644 (file)
@@ -5461,20 +5461,13 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
        int pipe = intel_crtc->pipe;
        int plane = intel_crtc->plane;
        int num_connectors = 0;
-       intel_clock_t clock, reduced_clock;
-       u32 dpll = 0, fp = 0, fp2 = 0;
-       bool ok, has_reduced_clock = false;
-       bool is_lvds = false, is_dp = false, is_cpu_edp = false;
+       bool is_dp = false, is_cpu_edp = false;
        struct intel_encoder *encoder;
-       u32 temp;
        int ret;
        bool dither;
 
        for_each_encoder_on_crtc(dev, crtc, encoder) {
                switch (encoder->type) {
-               case INTEL_OUTPUT_LVDS:
-                       is_lvds = true;
-                       break;
                case INTEL_OUTPUT_DISPLAYPORT:
                        is_dp = true;
                        break;
@@ -5508,143 +5501,26 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
        if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock))
                return -EINVAL;
 
-       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-               ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
-                                            &has_reduced_clock,
-                                            &reduced_clock);
-               if (!ok) {
-                       DRM_ERROR("Couldn't find PLL settings for mode!\n");
-                       return -EINVAL;
-               }
-       }
-
        /* Ensure that the cursor is valid for the new mode before changing... */
        intel_crtc_update_cursor(crtc, true);
 
        /* determine panel color depth */
        dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
                                              adjusted_mode);
-       if (is_lvds && dev_priv->lvds_dither)
-               dither = true;
 
        DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
        drm_mode_debug_printmodeline(mode);
 
-       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-               fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
-               if (has_reduced_clock)
-                       fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
-                             reduced_clock.m2;
-
-               dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock,
-                                            fp);
-
-               /* CPU eDP is the only output that doesn't need a PCH PLL of its
-                * own on pre-Haswell/LPT generation */
-               if (!is_cpu_edp) {
-                       struct intel_pch_pll *pll;
-
-                       pll = intel_get_pch_pll(intel_crtc, dpll, fp);
-                       if (pll == NULL) {
-                               DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
-                                                pipe);
-                               return -EINVAL;
-                       }
-               } else
-                       intel_put_pch_pll(intel_crtc);
-
-               /* The LVDS pin pair needs to be on before the DPLLs are
-                * enabled.  This is an exception to the general rule that
-                * mode_set doesn't turn things on.
-                */
-               if (is_lvds) {
-                       temp = I915_READ(PCH_LVDS);
-                       temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-                       if (HAS_PCH_CPT(dev)) {
-                               temp &= ~PORT_TRANS_SEL_MASK;
-                               temp |= PORT_TRANS_SEL_CPT(pipe);
-                       } else {
-                               if (pipe == 1)
-                                       temp |= LVDS_PIPEB_SELECT;
-                               else
-                                       temp &= ~LVDS_PIPEB_SELECT;
-                       }
-
-                       /* set the corresponsding LVDS_BORDER bit */
-                       temp |= dev_priv->lvds_border_bits;
-                       /* Set the B0-B3 data pairs corresponding to whether
-                        * we're going to set the DPLLs for dual-channel mode or
-                        * not.
-                        */
-                       if (clock.p2 == 7)
-                               temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-                       else
-                               temp &= ~(LVDS_B0B3_POWER_UP |
-                                         LVDS_CLKB_POWER_UP);
-
-                       /* It would be nice to set 24 vs 18-bit mode
-                        * (LVDS_A3_POWER_UP) appropriately here, but we need to
-                        * look more thoroughly into how panels behave in the
-                        * two modes.
-                        */
-                       temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-                       if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
-                               temp |= LVDS_HSYNC_POLARITY;
-                       if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
-                               temp |= LVDS_VSYNC_POLARITY;
-                       I915_WRITE(PCH_LVDS, temp);
-               }
-       }
-
-       if (is_dp && !is_cpu_edp) {
+       if (is_dp && !is_cpu_edp)
                intel_dp_set_m_n(crtc, mode, adjusted_mode);
-       } else {
-               if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-                       /* For non-DP output, clear any trans DP clock recovery
-                        * setting.*/
-                       I915_WRITE(TRANSDATA_M1(pipe), 0);
-                       I915_WRITE(TRANSDATA_N1(pipe), 0);
-                       I915_WRITE(TRANSDPLINK_M1(pipe), 0);
-                       I915_WRITE(TRANSDPLINK_N1(pipe), 0);
-               }
-       }
 
        intel_crtc->lowfreq_avail = false;
-       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-               if (intel_crtc->pch_pll) {
-                       I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-
-                       /* Wait for the clocks to stabilize. */
-                       POSTING_READ(intel_crtc->pch_pll->pll_reg);
-                       udelay(150);
-
-                       /* The pixel multiplier can only be updated once the
-                        * DPLL is enabled and the clocks are stable.
-                        *
-                        * So write it again.
-                        */
-                       I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-               }
-
-               if (intel_crtc->pch_pll) {
-                       if (is_lvds && has_reduced_clock && i915_powersave) {
-                               I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
-                               intel_crtc->lowfreq_avail = true;
-                       } else {
-                               I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
-                       }
-               }
-       }
 
        intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
        if (!is_dp || is_cpu_edp)
                ironlake_set_m_n(crtc, mode, adjusted_mode);
 
-       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
-               if (is_cpu_edp)
-                       ironlake_set_pll_edp(crtc, adjusted_mode->clock);
-
        haswell_set_pipeconf(crtc, adjusted_mode, dither);
 
        /* Set up the display plane register */