[PATCH] x86-64: - Ignore long SMI interrupts in clock calibration
authorJack Steiner <steiner@sgi.com>
Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)
committerAndi Kleen <andi@basil.nowhere.org>
Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)
Ensure that no SMI interrupts occur between the read of the HPET & TSC
in the clock calibration loop.

I noticed that a 2.66GHz system incorrectly detected the processor
clock speed about 1/7 of the time:

time.c: Detected 2660.005 MHz processor. (most of the time)
time.c: Detected 2988.203 MHz processor. (sometime)

The problem is caused by an SMI interrupt occuring in hpet_calibrate_tsc()
between the read of the HPET & TSC. Prior to switching the BIOS into
ACPI mode, it appears that every 27msec an SMI interrupt occurs. The
SMI interrupt takes 4.8 msec to process.

Note: On my test system, TICK_MIN had to be >380. I picked 5000
to minimize risk of having a value that is too small for other
platforms.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
 arch/x86_64/kernel/time.c |   25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

arch/x86_64/kernel/time.c

index 9f05bc9b2dad7023573de34d6f33260eb0c9fe33..5cc76d0d331f0d0fe2b1f7913d7705887112b073 100644 (file)
@@ -656,6 +656,25 @@ core_initcall(cpufreq_tsc);
  */
 
 #define TICK_COUNT 100000000
+#define TICK_MIN   5000
+
+/*
+ * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none
+ * occurs between the reads of the hpet & TSC.
+ */
+static void __init read_hpet_tsc(int *hpet, int *tsc)
+{
+       int tsc1, tsc2, hpet1;
+
+       do {
+               tsc1 = get_cycles_sync();
+               hpet1 = hpet_readl(HPET_COUNTER);
+               tsc2 = get_cycles_sync();
+       } while (tsc2 - tsc1 > TICK_MIN);
+       *hpet = hpet1;
+       *tsc = tsc2;
+}
+
 
 static unsigned int __init hpet_calibrate_tsc(void)
 {
@@ -666,13 +685,11 @@ static unsigned int __init hpet_calibrate_tsc(void)
        local_irq_save(flags);
        local_irq_disable();
 
-       hpet_start = hpet_readl(HPET_COUNTER);
-       rdtscl(tsc_start);
+       read_hpet_tsc(&hpet_start, &tsc_start);
 
        do {
                local_irq_disable();
-               hpet_now = hpet_readl(HPET_COUNTER);
-               tsc_now = get_cycles_sync();
+               read_hpet_tsc(&hpet_now, &tsc_now);
                local_irq_restore(flags);
        } while ((tsc_now - tsc_start) < TICK_COUNT &&
                 (hpet_now - hpet_start) < TICK_COUNT);