header-y += sigcontext_64.h
header-y += siginfo_32.h
header-y += siginfo_64.h
-header-y += signal_32.h
-header-y += signal_64.h
header-y += apc.h
header-y += asi.h
-#ifndef ___ASM_SPARC_SIGNAL_H
-#define ___ASM_SPARC_SIGNAL_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/signal_64.h>
+#ifndef __SPARC_SIGNAL_H
+#define __SPARC_SIGNAL_H
+
+#include <asm/sigcontext.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SUBSIG_STACK 0
+#define SUBSIG_ILLINST 2
+#define SUBSIG_PRIVINST 3
+#define SUBSIG_BADTRAP(t) (0x80 + (t))
+
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+
+#define SIGEMT 7
+#define SUBSIG_TAG 10
+
+#define SIGFPE 8
+#define SUBSIG_FPDISABLED 0x400
+#define SUBSIG_FPERROR 0x404
+#define SUBSIG_FPINTOVFL 0x001
+#define SUBSIG_FPSTSIG 0x002
+#define SUBSIG_IDIVZERO 0x014
+#define SUBSIG_FPINEXACT 0x0c4
+#define SUBSIG_FPDIVZERO 0x0c8
+#define SUBSIG_FPUNFLOW 0x0cc
+#define SUBSIG_FPOPERROR 0x0d0
+#define SUBSIG_FPOVFLOW 0x0d4
+
+#define SIGKILL 9
+#define SIGBUS 10
+#define SUBSIG_BUSTIMEOUT 1
+#define SUBSIG_ALIGNMENT 2
+#define SUBSIG_MISCERROR 5
+
+#define SIGSEGV 11
+#define SUBSIG_NOMAPPING 3
+#define SUBSIG_PROTECTION 4
+#define SUBSIG_SEGERROR 5
+
+#define SIGSYS 12
+
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGURG 16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP 17
+#define SIGTSTP 18
+#define SIGCONT 19
+#define SIGCHLD 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGIO 23
+#define SIGPOLL SIGIO /* SysV name for SIGIO */
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGLOST 29
+#define SIGPWR SIGLOST
+#define SIGUSR1 30
+#define SIGUSR2 31
+
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define __OLD_NSIG 32
+#define __NEW_NSIG 64
+#define _NSIG_BPW 64
+#define _NSIG_WORDS (__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN 32
+#define SIGRTMAX __NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define _NSIG __NEW_NSIG
+#define __new_sigset_t sigset_t
+#define __new_sigaction sigaction
+#define __new_sigaction32 sigaction32
+#define __old_sigset_t old_sigset_t
+#define __old_sigaction old_sigaction
+#define __old_sigaction32 old_sigaction32
#else
-#include <asm/signal_32.h>
+#define _NSIG __OLD_NSIG
+#define NSIG _NSIG
+#define __old_sigset_t sigset_t
+#define __old_sigaction sigaction
+#define __old_sigaction32 sigaction32
#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+/* A SunOS sigstack */
+struct sigstack {
+ /* XXX 32-bit pointers pinhead XXX */
+ char *the_stack;
+ int cur_status;
+};
+
+/* Sigvec flags */
+#define _SV_SSTACK 1u /* This signal handler should use sig-stack */
+#define _SV_INTR 2u /* Sig return should not restart system call */
+#define _SV_RESET 4u /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD 8u /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP _SV_IGNCHILD
+#define SA_STACK _SV_SSTACK
+#define SA_ONSTACK _SV_SSTACK
+#define SA_RESTART _SV_INTR
+#define SA_ONESHOT _SV_RESET
+#define SA_NOMASK 0x20u
+#define SA_NOCLDWAIT 0x100u
+#define SA_SIGINFO 0x200u
+
+
+#define SIG_BLOCK 0x01 /* for blocking signals */
+#define SIG_UNBLOCK 0x02 /* for unblocking signals */
+#define SIG_SETMASK 0x04 /* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 4096
+#define SIGSTKSZ 16384
+
+#ifdef __KERNEL__
+/*
+ * DJHR
+ * SA_STATIC_ALLOC is used for the sparc32 system to indicate that this
+ * interrupt handler's irq structure should be statically allocated
+ * by the request_irq routine.
+ * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
+ * of interrupt usage and that sucks. Also without a flag like this
+ * it may be possible for the free_irq routine to attempt to free
+ * statically allocated data.. which is NOT GOOD.
+ *
+ */
+#define SA_STATIC_ALLOC 0x8000
#endif
+
+#include <asm-generic/signal.h>
+
+struct __new_sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer; /* not used by Linux/SPARC yet */
+ __new_sigset_t sa_mask;
+};
+
+struct __old_sigaction {
+ __sighandler_t sa_handler;
+ __old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void); /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+struct k_sigaction {
+ struct __new_sigaction sa;
+ void __user *ka_restorer;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_SIGNAL_H) */
+++ /dev/null
-#ifndef _ASMSPARC_SIGNAL_H
-#define _ASMSPARC_SIGNAL_H
-
-#include <asm/sigcontext.h>
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#include <linux/personality.h>
-#include <linux/types.h>
-#endif
-#endif
-
-/* On the Sparc the signal handlers get passed a 'sub-signal' code
- * for certain signal types, which we document here.
- */
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SUBSIG_STACK 0
-#define SUBSIG_ILLINST 2
-#define SUBSIG_PRIVINST 3
-#define SUBSIG_BADTRAP(t) (0x80 + (t))
-
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-
-#define SIGEMT 7
-#define SUBSIG_TAG 10
-
-#define SIGFPE 8
-#define SUBSIG_FPDISABLED 0x400
-#define SUBSIG_FPERROR 0x404
-#define SUBSIG_FPINTOVFL 0x001
-#define SUBSIG_FPSTSIG 0x002
-#define SUBSIG_IDIVZERO 0x014
-#define SUBSIG_FPINEXACT 0x0c4
-#define SUBSIG_FPDIVZERO 0x0c8
-#define SUBSIG_FPUNFLOW 0x0cc
-#define SUBSIG_FPOPERROR 0x0d0
-#define SUBSIG_FPOVFLOW 0x0d4
-
-#define SIGKILL 9
-#define SIGBUS 10
-#define SUBSIG_BUSTIMEOUT 1
-#define SUBSIG_ALIGNMENT 2
-#define SUBSIG_MISCERROR 5
-
-#define SIGSEGV 11
-#define SUBSIG_NOMAPPING 3
-#define SUBSIG_PROTECTION 4
-#define SUBSIG_SEGERROR 5
-
-#define SIGSYS 12
-
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGURG 16
-
-/* SunOS values which deviate from the Linux/i386 ones */
-#define SIGSTOP 17
-#define SIGTSTP 18
-#define SIGCONT 19
-#define SIGCHLD 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGIO 23
-#define SIGPOLL SIGIO /* SysV name for SIGIO */
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGLOST 29
-#define SIGPWR SIGLOST
-#define SIGUSR1 30
-#define SIGUSR2 31
-
-/* Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-
-#define __OLD_NSIG 32
-#define __NEW_NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (__NEW_NSIG / _NSIG_BPW)
-
-#define SIGRTMIN 32
-#define SIGRTMAX __NEW_NSIG
-
-#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
-#define _NSIG __NEW_NSIG
-#define __new_sigset_t sigset_t
-#define __new_sigaction sigaction
-#define __old_sigset_t old_sigset_t
-#define __old_sigaction old_sigaction
-#else
-#define _NSIG __OLD_NSIG
-#define __old_sigset_t sigset_t
-#define __old_sigaction sigaction
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long __old_sigset_t;
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} __new_sigset_t;
-
-
-#ifdef __KERNEL__
-/* A SunOS sigstack */
-struct sigstack {
- char *the_stack;
- int cur_status;
-};
-#endif
-
-/* Sigvec flags */
-#define _SV_SSTACK 1u /* This signal handler should use sig-stack */
-#define _SV_INTR 2u /* Sig return should not restart system call */
-#define _SV_RESET 4u /* Set handler to SIG_DFL upon taken signal */
-#define _SV_IGNCHILD 8u /* Do not send SIGCHLD */
-
-/*
- * sa_flags values: SA_STACK is not currently supported, but will allow the
- * usage of signal stacks by using the (now obsolete) sa_restorer field in
- * the sigaction structure as a stack pointer. This is now possible due to
- * the changes in signal handling. LBT 010493.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- */
-#define SA_NOCLDSTOP _SV_IGNCHILD
-#define SA_STACK _SV_SSTACK
-#define SA_ONSTACK _SV_SSTACK
-#define SA_RESTART _SV_INTR
-#define SA_ONESHOT _SV_RESET
-#define SA_NOMASK 0x20u
-#define SA_NOCLDWAIT 0x100u
-#define SA_SIGINFO 0x200u
-
-#define SIG_BLOCK 0x01 /* for blocking signals */
-#define SIG_UNBLOCK 0x02 /* for unblocking signals */
-#define SIG_SETMASK 0x04 /* for setting the signal mask */
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 4096
-#define SIGSTKSZ 16384
-
-#ifdef __KERNEL__
-/*
- * DJHR
- * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
- * interrupt handler's irq structure should be statically allocated
- * by the request_irq routine.
- * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
- * of interrupt usage and that sucks. Also without a flag like this
- * it may be possible for the free_irq routine to attempt to free
- * statically allocated data.. which is NOT GOOD.
- *
- */
-#define SA_STATIC_ALLOC 0x8000
-#endif
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct __new_sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void); /* Not used by Linux/SPARC */
- __new_sigset_t sa_mask;
-};
-
-struct k_sigaction {
- struct __new_sigaction sa;
- void __user *ka_restorer;
-};
-
-struct __old_sigaction {
- __sighandler_t sa_handler;
- __old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer) (void); /* not used by Linux/SPARC */
-};
-
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_ASMSPARC_SIGNAL_H) */
+++ /dev/null
-#ifndef __SPARC_SIGNAL_H
-#define __SPARC_SIGNAL_H
-
-#include <asm/sigcontext.h>
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#include <linux/personality.h>
-#include <linux/types.h>
-#endif
-#endif
-
-/* On the Sparc the signal handlers get passed a 'sub-signal' code
- * for certain signal types, which we document here.
- */
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SUBSIG_STACK 0
-#define SUBSIG_ILLINST 2
-#define SUBSIG_PRIVINST 3
-#define SUBSIG_BADTRAP(t) (0x80 + (t))
-
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-
-#define SIGEMT 7
-#define SUBSIG_TAG 10
-
-#define SIGFPE 8
-#define SUBSIG_FPDISABLED 0x400
-#define SUBSIG_FPERROR 0x404
-#define SUBSIG_FPINTOVFL 0x001
-#define SUBSIG_FPSTSIG 0x002
-#define SUBSIG_IDIVZERO 0x014
-#define SUBSIG_FPINEXACT 0x0c4
-#define SUBSIG_FPDIVZERO 0x0c8
-#define SUBSIG_FPUNFLOW 0x0cc
-#define SUBSIG_FPOPERROR 0x0d0
-#define SUBSIG_FPOVFLOW 0x0d4
-
-#define SIGKILL 9
-#define SIGBUS 10
-#define SUBSIG_BUSTIMEOUT 1
-#define SUBSIG_ALIGNMENT 2
-#define SUBSIG_MISCERROR 5
-
-#define SIGSEGV 11
-#define SUBSIG_NOMAPPING 3
-#define SUBSIG_PROTECTION 4
-#define SUBSIG_SEGERROR 5
-
-#define SIGSYS 12
-
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGURG 16
-
-/* SunOS values which deviate from the Linux/i386 ones */
-#define SIGSTOP 17
-#define SIGTSTP 18
-#define SIGCONT 19
-#define SIGCHLD 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGIO 23
-#define SIGPOLL SIGIO /* SysV name for SIGIO */
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGLOST 29
-#define SIGPWR SIGLOST
-#define SIGUSR1 30
-#define SIGUSR2 31
-
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define __OLD_NSIG 32
-#define __NEW_NSIG 64
-#define _NSIG_BPW 64
-#define _NSIG_WORDS (__NEW_NSIG / _NSIG_BPW)
-
-#define SIGRTMIN 32
-#define SIGRTMAX __NEW_NSIG
-
-#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
-#define _NSIG __NEW_NSIG
-#define __new_sigset_t sigset_t
-#define __new_sigaction sigaction
-#define __new_sigaction32 sigaction32
-#define __old_sigset_t old_sigset_t
-#define __old_sigaction old_sigaction
-#define __old_sigaction32 old_sigaction32
-#else
-#define _NSIG __OLD_NSIG
-#define NSIG _NSIG
-#define __old_sigset_t sigset_t
-#define __old_sigaction sigaction
-#define __old_sigaction32 sigaction32
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long __old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} __new_sigset_t;
-
-/* A SunOS sigstack */
-struct sigstack {
- /* XXX 32-bit pointers pinhead XXX */
- char *the_stack;
- int cur_status;
-};
-
-/* Sigvec flags */
-#define _SV_SSTACK 1u /* This signal handler should use sig-stack */
-#define _SV_INTR 2u /* Sig return should not restart system call */
-#define _SV_RESET 4u /* Set handler to SIG_DFL upon taken signal */
-#define _SV_IGNCHILD 8u /* Do not send SIGCHLD */
-
-/*
- * sa_flags values: SA_STACK is not currently supported, but will allow the
- * usage of signal stacks by using the (now obsolete) sa_restorer field in
- * the sigaction structure as a stack pointer. This is now possible due to
- * the changes in signal handling. LBT 010493.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- */
-#define SA_NOCLDSTOP _SV_IGNCHILD
-#define SA_STACK _SV_SSTACK
-#define SA_ONSTACK _SV_SSTACK
-#define SA_RESTART _SV_INTR
-#define SA_ONESHOT _SV_RESET
-#define SA_NOMASK 0x20u
-#define SA_NOCLDWAIT 0x100u
-#define SA_SIGINFO 0x200u
-
-
-#define SIG_BLOCK 0x01 /* for blocking signals */
-#define SIG_UNBLOCK 0x02 /* for unblocking signals */
-#define SIG_SETMASK 0x04 /* for setting the signal mask */
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 4096
-#define SIGSTKSZ 16384
-
-#ifdef __KERNEL__
-/*
- * DJHR
- * SA_STATIC_ALLOC is used for the sparc32 system to indicate that this
- * interrupt handler's irq structure should be statically allocated
- * by the request_irq routine.
- * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
- * of interrupt usage and that sucks. Also without a flag like this
- * it may be possible for the free_irq routine to attempt to free
- * statically allocated data.. which is NOT GOOD.
- *
- */
-#define SA_STATIC_ALLOC 0x8000
-#endif
-
-#include <asm-generic/signal.h>
-
-struct __new_sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer; /* not used by Linux/SPARC yet */
- __new_sigset_t sa_mask;
-};
-
-struct __old_sigaction {
- __sighandler_t sa_handler;
- __old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void); /* not used by Linux/SPARC yet */
-};
-
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-struct k_sigaction {
- struct __new_sigaction sa;
- void __user *ka_restorer;
-};
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC_SIGNAL_H) */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff