ARM: dts: sbc-t3x30: remove unneded unit names

This patch fixes the following DTC warnings for omap3-sbc-t3517.dtb,
omap3-sbc-t3530.dtb and omap3-sbc-t3730.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index 827f614261f6f0041096514be33f90540c61a608..73643fabde5d10529c64f84f010e90c6f9c21ed3 100644 (file)
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -3,7 +3,7 @@
  */
 
 / {
-       tfp410: encoder@0 {
+       tfp410: encoder {
                compatible = "ti,tfp410";
 
                powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;  /* gpio_54 */
@@ -18,7 +18,7 @@
                        port@0 {
                                reg = <0>;
 
-                               tfp410_in: endpoint@0 {
+                               tfp410_in: endpoint {
                                        remote-endpoint = <&dpi_out>;
                                };
                        };
@@ -26,14 +26,14 @@
                        port@1 {
                                reg = <1>;
 
-                               tfp410_out: endpoint@0 {
+                               tfp410_out: endpoint {
                                        remote-endpoint = <&dvi_connector_in>;
                                };
                        };
                };
        };
 
-       dvi0: connector@0 {
+       dvi0: connector {
                compatible = "dvi-connector";
                label = "dvi";