obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o
-obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o
+obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o
+++ /dev/null
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/timer.h>
-#include <asm/pgtable.h>
-#include <asm/delay.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/arch_hooks.h>
-#include <asm/i8259.h>
-
-
-
-/*
- * Note that on a 486, we don't want to do a SIGFPE on an irq13
- * as the irq is unreliable, and exception 16 works correctly
- * (ie as explained in the intel literature). On a 386, you
- * can't use exception 16 due to bad IBM design, so we have to
- * rely on the less exact irq13.
- *
- * Careful.. Not only is IRQ13 unreliable, but it is also
- * leads to races. IBM designers who came up with it should
- * be shot.
- */
-
-
-static irqreturn_t math_error_irq(int cpl, void *dev_id)
-{
- extern void math_error(void __user *);
- outb(0,0xF0);
- if (ignore_fpu_irq || !boot_cpu_data.hard_math)
- return IRQ_NONE;
- math_error((void __user *)get_irq_regs()->ip);
- return IRQ_HANDLED;
-}
-
-/*
- * New motherboards sometimes make IRQ 13 be a PCI interrupt,
- * so allow interrupt sharing.
- */
-static struct irqaction fpu_irq = {
- .handler = math_error_irq,
- .mask = CPU_MASK_NONE,
- .name = "fpu",
-};
-
-void __init init_ISA_irqs (void)
-{
- int i;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- init_bsp_APIC();
-#endif
- init_8259A(0);
-
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- for (i = 0; i < 16; i++) {
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- }
-}
-
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
- int i;
-
- /* all the set up before the call gates are initialised */
- pre_intr_init_hook();
-
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
- if (i >= NR_IRQS)
- break;
- /* SYSCALL_VECTOR was reserved in trap_init. */
- if (!test_bit(vector, used_vectors))
- set_intr_gate(vector, interrupt[i]);
- }
-
- /* setup after call gates are initialised (usually add in
- * the architecture specific gates)
- */
- intr_init_hook();
-
- /*
- * External FPU? Set up irq13 if so, for
- * original braindamaged IBM FERR coupling.
- */
- if (boot_cpu_data.hard_math && !cpu_has_fpu)
- setup_irq(FPU_IRQ, &fpu_irq);
-
- irq_ctx_init(smp_processor_id());
-}
+++ /dev/null
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-
-#include <asm/acpi.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/delay.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-/*
- * Common place to define all x86 IRQ vectors
- *
- * This builds up the IRQ handler stubs using some ugly macros in irq.h
- *
- * These macros create the low-level assembly IRQ routines that save
- * register context and call do_IRQ(). do_IRQ() then does all the
- * operations that are needed to keep the AT (or SMP IOAPIC)
- * interrupt-controller happy.
- */
-
-#define IRQ_NAME2(nr) nr##_interrupt(void)
-#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
-
-/*
- * SMP has a few special interrupts for IPI messages
- */
-
-#define BUILD_IRQ(nr) \
- asmlinkage void IRQ_NAME(nr); \
- asm("\n.p2align\n" \
- "IRQ" #nr "_interrupt:\n\t" \
- "push $~(" #nr ") ; " \
- "jmp common_interrupt");
-
-#define BI(x,y) \
- BUILD_IRQ(x##y)
-
-#define BUILD_16_IRQS(x) \
- BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
- BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
- BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
- BI(x,c) BI(x,d) BI(x,e) BI(x,f)
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
- BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
-BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
-BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
-
-#undef BUILD_16_IRQS
-#undef BI
-
-
-#define IRQ(x,y) \
- IRQ##x##y##_interrupt
-
-#define IRQLIST_16(x) \
- IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
- IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
- IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
- IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
-
-/* for the irq vectors */
-static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
- IRQLIST_16(0x2), IRQLIST_16(0x3),
- IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
- IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
- IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
-};
-
-#undef IRQ
-#undef IRQLIST_16
-
-
-
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-
-static struct irqaction irq2 = {
- .handler = no_action,
- .mask = CPU_MASK_NONE,
- .name = "cascade",
-};
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
- [0 ... IRQ0_VECTOR - 1] = -1,
- [IRQ0_VECTOR] = 0,
- [IRQ1_VECTOR] = 1,
- [IRQ2_VECTOR] = 2,
- [IRQ3_VECTOR] = 3,
- [IRQ4_VECTOR] = 4,
- [IRQ5_VECTOR] = 5,
- [IRQ6_VECTOR] = 6,
- [IRQ7_VECTOR] = 7,
- [IRQ8_VECTOR] = 8,
- [IRQ9_VECTOR] = 9,
- [IRQ10_VECTOR] = 10,
- [IRQ11_VECTOR] = 11,
- [IRQ12_VECTOR] = 12,
- [IRQ13_VECTOR] = 13,
- [IRQ14_VECTOR] = 14,
- [IRQ15_VECTOR] = 15,
- [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-static void __init init_ISA_irqs (void)
-{
- int i;
-
- init_bsp_APIC();
- init_8259A(0);
-
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
-
- if (i < 16) {
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- } else {
- /*
- * 'high' PCI IRQs filled in on demand
- */
- irq_desc[i].chip = &no_irq_chip;
- }
- }
-}
-
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
- int i;
-
- init_ISA_irqs();
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
- if (vector != IA32_SYSCALL_VECTOR)
- set_intr_gate(vector, interrupt[i]);
- }
-
-#ifdef CONFIG_SMP
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPIs for invalidation */
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
- /* IPI for generic function call */
- alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
- /* Low priority IPI to cleanup after moving an irq */
- set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
-#endif
- alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
- alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-
- /* self generated IPI for local APIC timer */
- alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-}
--- /dev/null
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/timer.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/i8259.h>
+
+
+
+/*
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id)
+{
+ extern void math_error(void __user *);
+ outb(0,0xF0);
+ if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+ return IRQ_NONE;
+ math_error((void __user *)get_irq_regs()->ip);
+ return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
+ */
+static struct irqaction fpu_irq = {
+ .handler = math_error_irq,
+ .mask = CPU_MASK_NONE,
+ .name = "fpu",
+};
+
+void __init init_ISA_irqs (void)
+{
+ int i;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ init_bsp_APIC();
+#endif
+ init_8259A(0);
+
+ /*
+ * 16 old-style INTA-cycle interrupts:
+ */
+ for (i = 0; i < 16; i++) {
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
+ handle_level_irq, "XT");
+ }
+}
+
+/* Overridden in paravirt.c */
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+void __init native_init_IRQ(void)
+{
+ int i;
+
+ /* all the set up before the call gates are initialised */
+ pre_intr_init_hook();
+
+ /*
+ * Cover the whole vector space, no vector can escape
+ * us. (some of these will be overridden and become
+ * 'special' SMP interrupts)
+ */
+ for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+ int vector = FIRST_EXTERNAL_VECTOR + i;
+ if (i >= NR_IRQS)
+ break;
+ /* SYSCALL_VECTOR was reserved in trap_init. */
+ if (!test_bit(vector, used_vectors))
+ set_intr_gate(vector, interrupt[i]);
+ }
+
+ /* setup after call gates are initialised (usually add in
+ * the architecture specific gates)
+ */
+ intr_init_hook();
+
+ /*
+ * External FPU? Set up irq13 if so, for
+ * original braindamaged IBM FERR coupling.
+ */
+ if (boot_cpu_data.hard_math && !cpu_has_fpu)
+ setup_irq(FPU_IRQ, &fpu_irq);
+
+ irq_ctx_init(smp_processor_id());
+}
--- /dev/null
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/acpi.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/hw_irq.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+
+/*
+ * Common place to define all x86 IRQ vectors
+ *
+ * This builds up the IRQ handler stubs using some ugly macros in irq.h
+ *
+ * These macros create the low-level assembly IRQ routines that save
+ * register context and call do_IRQ(). do_IRQ() then does all the
+ * operations that are needed to keep the AT (or SMP IOAPIC)
+ * interrupt-controller happy.
+ */
+
+#define IRQ_NAME2(nr) nr##_interrupt(void)
+#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
+
+/*
+ * SMP has a few special interrupts for IPI messages
+ */
+
+#define BUILD_IRQ(nr) \
+ asmlinkage void IRQ_NAME(nr); \
+ asm("\n.p2align\n" \
+ "IRQ" #nr "_interrupt:\n\t" \
+ "push $~(" #nr ") ; " \
+ "jmp common_interrupt");
+
+#define BI(x,y) \
+ BUILD_IRQ(x##y)
+
+#define BUILD_16_IRQS(x) \
+ BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
+ BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
+ BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
+ BI(x,c) BI(x,d) BI(x,e) BI(x,f)
+
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+ BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
+BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
+BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
+BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
+
+#undef BUILD_16_IRQS
+#undef BI
+
+
+#define IRQ(x,y) \
+ IRQ##x##y##_interrupt
+
+#define IRQLIST_16(x) \
+ IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
+ IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
+ IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
+ IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
+
+/* for the irq vectors */
+static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
+ IRQLIST_16(0x2), IRQLIST_16(0x3),
+ IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
+ IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
+ IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
+};
+
+#undef IRQ
+#undef IRQLIST_16
+
+
+
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+
+static struct irqaction irq2 = {
+ .handler = no_action,
+ .mask = CPU_MASK_NONE,
+ .name = "cascade",
+};
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+ [0 ... IRQ0_VECTOR - 1] = -1,
+ [IRQ0_VECTOR] = 0,
+ [IRQ1_VECTOR] = 1,
+ [IRQ2_VECTOR] = 2,
+ [IRQ3_VECTOR] = 3,
+ [IRQ4_VECTOR] = 4,
+ [IRQ5_VECTOR] = 5,
+ [IRQ6_VECTOR] = 6,
+ [IRQ7_VECTOR] = 7,
+ [IRQ8_VECTOR] = 8,
+ [IRQ9_VECTOR] = 9,
+ [IRQ10_VECTOR] = 10,
+ [IRQ11_VECTOR] = 11,
+ [IRQ12_VECTOR] = 12,
+ [IRQ13_VECTOR] = 13,
+ [IRQ14_VECTOR] = 14,
+ [IRQ15_VECTOR] = 15,
+ [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
+};
+
+static void __init init_ISA_irqs (void)
+{
+ int i;
+
+ init_bsp_APIC();
+ init_8259A(0);
+
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+
+ if (i < 16) {
+ /*
+ * 16 old-style INTA-cycle interrupts:
+ */
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
+ handle_level_irq, "XT");
+ } else {
+ /*
+ * 'high' PCI IRQs filled in on demand
+ */
+ irq_desc[i].chip = &no_irq_chip;
+ }
+ }
+}
+
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+void __init native_init_IRQ(void)
+{
+ int i;
+
+ init_ISA_irqs();
+ /*
+ * Cover the whole vector space, no vector can escape
+ * us. (some of these will be overridden and become
+ * 'special' SMP interrupts)
+ */
+ for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+ int vector = FIRST_EXTERNAL_VECTOR + i;
+ if (vector != IA32_SYSCALL_VECTOR)
+ set_intr_gate(vector, interrupt[i]);
+ }
+
+#ifdef CONFIG_SMP
+ /*
+ * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+ * IPI, driven by wakeup.
+ */
+ alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+ /* IPIs for invalidation */
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
+
+ /* IPI for generic function call */
+ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+ /* Low priority IPI to cleanup after moving an irq */
+ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+#endif
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+ alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+
+ /* self generated IPI for local APIC timer */
+ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+ /* IPI vectors for APIC spurious and error interrupts */
+ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+ alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+ if (!acpi_ioapic)
+ setup_irq(2, &irq2);
+}
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff