NdisZeroMemory(&Frame, sizeof(FRAME_ADDBA_REQ));
if (MlmeAddBAReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr)) {
- NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("BA - MlmeADDBAAction() allocate memory failed \n"));
return;
}
- // 1. find entry
+ /* 1. find entry */
Idx =
pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
if (Idx == 0) {
FRAME_BAR FrameBar;
pInfo = (MLME_DELBA_REQ_STRUCT *) Elem->Msg;
- // must send back DELBA
+ /* must send back DELBA */
NdisZeroMemory(&Frame, sizeof(FRAME_DELBA_REQ));
DBGPRINT(RT_DEBUG_TRACE,
("==> MlmeDELBAAction(), Initiator(%d) \n", pInfo->Initiator));
if (MlmeDelBAReqSanity(pAd, Elem->Msg, Elem->MsgLen)) {
- NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_ERROR,
("BA - MlmeDELBAAction() allocate memory failed 1. \n"));
return;
}
- NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
MlmeFreeMemory(pAd, pOutBuffer);
DBGPRINT(RT_DEBUG_ERROR,
("BA - MlmeDELBAAction() allocate memory failed 2. \n"));
return;
}
- // SEND BAR (Send BAR to refresh peer reordering buffer.)
+ /* SEND BAR (Send BAR to refresh peer reordering buffer.) */
Idx =
pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
pAd->MacTab.Content[pInfo->Wcid].Addr,
pAd->CurrentAddress);
- FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
- FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton.
- FrameBar.BarControl.TID = pInfo->TID; // make sure sequence not clear in DEL funciton.
- FrameBar.BarControl.ACKPolicy = IMMED_BA; // make sure sequence not clear in DEL funciton.
- FrameBar.BarControl.Compressed = 1; // make sure sequence not clear in DEL funciton.
- FrameBar.BarControl.MTID = 0; // make sure sequence not clear in DEL funciton.
+ FrameBar.StartingSeq.field.FragNum = 0; /* make sure sequence not clear in DEL funciton. */
+ FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; /* make sure sequence not clear in DEL funciton. */
+ FrameBar.BarControl.TID = pInfo->TID; /* make sure sequence not clear in DEL funciton. */
+ FrameBar.BarControl.ACKPolicy = IMMED_BA; /* make sure sequence not clear in DEL funciton. */
+ FrameBar.BarControl.Compressed = 1; /* make sure sequence not clear in DEL funciton. */
+ FrameBar.BarControl.MTID = 0; /* make sure sequence not clear in DEL funciton. */
MakeOutgoingFrame(pOutBuffer2, &FrameLen,
sizeof(FRAME_BAR), &FrameBar, END_OF_ARGS);
DBGPRINT(RT_DEBUG_TRACE,
("BA - MlmeDELBAAction() . Send BAR to refresh peer reordering buffer \n"));
- // SEND DELBA FRAME
+ /* SEND DELBA FRAME */
FrameLen = 0;
{
Frame.Action = DELBA;
Frame.DelbaParm.Initiator = pInfo->Initiator;
Frame.DelbaParm.TID = pInfo->TID;
- Frame.ReasonCode = 39; // Time Out
+ Frame.ReasonCode = 39; /* Time Out */
*(USHORT *) (&Frame.DelbaParm) =
cpu2le16(*(USHORT *) (&Frame.DelbaParm));
Frame.ReasonCode = cpu2le16(Frame.ReasonCode);
VOID MlmeInvalidAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
{
- //PUCHAR pOutBuffer = NULL;
- //Return the receiving frame except the MSB of category filed set to 1. 7.3.1.11
+ /*PUCHAR pOutBuffer = NULL; */
+ /*Return the receiving frame except the MSB of category filed set to 1. 7.3.1.11 */
}
VOID PeerQOSAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
FRAME_HT_INFO HTINFOframe, *pFrame;
UCHAR *pAddr;
- // 2. Always send back ADDBA Response
- NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+ /* 2. Always send back ADDBA Response */
+ NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("ACTION - respond_ht_information_exchange_action() allocate memory failed \n"));
return;
}
- // get RA
+ /* get RA */
pFrame = (FRAME_HT_INFO *) & Elem->Msg[0];
pAddr = pFrame->Hdr.Addr2;
NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
- // 2-1. Prepare ADDBA Response frame.
+ /* 2-1. Prepare ADDBA Response frame. */
{
if (ADHOC_ON(pAd))
ActHeaderInit(pAd, &HTINFOframe.Hdr, pAddr,
("ACTION - HT Notify Channel bandwidth action----> \n"));
if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) {
- // Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps
- // sending BW_Notify Action frame, and cause us to linkup and linkdown.
- // In legacy mode, don't need to parse HT action frame.
+ /* Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps */
+ /* sending BW_Notify Action frame, and cause us to linkup and linkdown. */
+ /* In legacy mode, don't need to parse HT action frame. */
DBGPRINT(RT_DEBUG_TRACE,
("ACTION -Ignore HT Notify Channel BW when link as legacy mode. BW = %d---> \n",
Elem->Msg[LENGTH_802_11 + 2]));
break;
}
- if (Elem->Msg[LENGTH_802_11 + 2] == 0) // 7.4.8.2. if value is 1, keep the same as supported channel bandwidth.
+ if (Elem->Msg[LENGTH_802_11 + 2] == 0) /* 7.4.8.2. if value is 1, keep the same as supported channel bandwidth. */
pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0;
break;
case SMPS_ACTION:
- // 7.3.1.25
+ /* 7.3.1.25 */
DBGPRINT(RT_DEBUG_TRACE, ("ACTION - SMPS action----> \n"));
if (((Elem->Msg[LENGTH_802_11 + 2] & 0x1) == 0)) {
pAd->MacTab.Content[Elem->Wcid].MmpsMode = MMPS_ENABLE;
DBGPRINT(RT_DEBUG_TRACE,
("Aid(%d) MIMO PS = %d\n", Elem->Wcid,
pAd->MacTab.Content[Elem->Wcid].MmpsMode));
- // rt2860c : add something for smps change.
+ /* rt2860c : add something for smps change. */
break;
case SETPCO_ACTION:
pHT_info =
(HT_INFORMATION_OCTET *) & Elem->Msg[LENGTH_802_11 +
2];
- // 7.4.8.10
+ /* 7.4.8.10 */
DBGPRINT(RT_DEBUG_TRACE,
("ACTION - HT Information Exchange action----> \n"));
if (pHT_info->Request) {
ASSERT(pBAEntry->Wcid < MAX_LEN_OF_MAC_TABLE);
- NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_ERROR,
("BA - MlmeADDBAAction() allocate memory failed \n"));
BarHeaderInit(pAd, &FrameBar, pEntry->Addr,
pAd->CurrentAddress);
- FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
- FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.
- FrameBar.BarControl.TID = TID; // make sure sequence not clear in DEL funciton.
+ FrameBar.StartingSeq.field.FragNum = 0; /* make sure sequence not clear in DEL function. */
+ FrameBar.StartingSeq.field.StartSeq = Sequence; /* make sure sequence not clear in DEL funciton. */
+ FrameBar.BarControl.TID = TID; /* make sure sequence not clear in DEL funciton. */
MakeOutgoingFrame(pOutBuffer, &FrameLen,
sizeof(FRAME_BAR), &FrameBar,
END_OF_ARGS);
- //if (!(CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_RALINK_CHIPSET)))
- if (1) // Now we always send BAR.
+ /*if (!(CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_RALINK_CHIPSET))) */
+ if (1) /* Now we always send BAR. */
{
- //MiniportMMRequestUnlock(pAd, 0, pOutBuffer, FrameLen);
+ /*MiniportMMRequestUnlock(pAd, 0, pOutBuffer, FrameLen); */
MiniportMMRequest(pAd,
(MGMT_USE_QUEUE_FLAG |
MapUserPriorityToAccessCategory
#include "../rt_config.h"
-#define BA_ORI_INIT_SEQ (pEntry->TxSeq[TID]) //1 // inital sequence number of BA session
+#define BA_ORI_INIT_SEQ (pEntry->TxSeq[TID]) /*1 // inital sequence number of BA session */
#define ORI_SESSION_MAX_RETRY 8
-#define ORI_BA_SESSION_TIMEOUT (2000) // ms
-#define REC_BA_SESSION_IDLE_TIMEOUT (1000) // ms
+#define ORI_BA_SESSION_TIMEOUT (2000) /* ms */
+#define REC_BA_SESSION_IDLE_TIMEOUT (1000) /* ms */
-#define REORDERING_PACKET_TIMEOUT ((100 * OS_HZ)/1000) // system ticks -- 100 ms
-#define MAX_REORDERING_PACKET_TIMEOUT ((3000 * OS_HZ)/1000) // system ticks -- 100 ms
+#define REORDERING_PACKET_TIMEOUT ((100 * OS_HZ)/1000) /* system ticks -- 100 ms */
+#define MAX_REORDERING_PACKET_TIMEOUT ((3000 * OS_HZ)/1000) /* system ticks -- 100 ms */
#define RESET_RCV_SEQ (0xFFFF)
{
UCHAR MaxSize;
- if (pAd->MACVersion >= RALINK_2883_VERSION) // 3*3
+ if (pAd->MACVersion >= RALINK_2883_VERSION) /* 3*3 */
{
if (pAd->MACVersion >= RALINK_3070_VERSION) {
if (pEntryPeer->WepStatus !=
Ndis802_11EncryptionDisabled)
- MaxSize = 7; // for non-open mode
+ MaxSize = 7; /* for non-open mode */
else
MaxSize = 13;
} else
MaxSize = 31;
- } else if (pAd->MACVersion >= RALINK_2880E_VERSION) // 2880 e
+ } else if (pAd->MACVersion >= RALINK_2880E_VERSION) /* 2880 e */
{
if (pEntryPeer->WepStatus != Ndis802_11EncryptionDisabled)
- MaxSize = 7; // for non-open mode
+ MaxSize = 7; /* for non-open mode */
else
MaxSize = 13;
} else
ASSERT(0);
BA_Reorder_AMSDU_Annnounce(pAd, pPacket);
} else {
- //
- // pass this 802.3 packet to upper layer or forward this packet to WM directly
- //
+ /* */
+ /* pass this 802.3 packet to upper layer or forward this packet to WM directly */
+ /* */
ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket,
RTMP_GET_PACKET_IF(pPacket));
return (TRUE);
}
-//static int blk_count=0; // sample take off, no use
+/*static int blk_count=0; // sample take off, no use */
static struct reordering_mpdu *ba_mpdu_blk_alloc(PRTMP_ADAPTER pAd)
{
NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
mpdu_blk = ba_dequeue(&pAd->mpdu_blk_pool.freelist);
if (mpdu_blk) {
-// blk_count++;
+/* blk_count++; */
/* reset mpdu_blk */
NdisZeroMemory(mpdu_blk, sizeof(struct reordering_mpdu));
}
ASSERT(mpdu_blk);
NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
-// blk_count--;
+/* blk_count--; */
ba_enqueue(&pAd->mpdu_blk_pool.freelist, mpdu_blk);
NdisReleaseSpinLock(&pAd->mpdu_blk_pool.lock);
}
NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
}
-//static
+/*static */
void ba_flush_reordering_timeout_mpdus(IN PRTMP_ADAPTER pAd,
IN PBA_REC_ENTRY pBAEntry,
IN ULONG Now32)
{
USHORT Sequence;
-// if ((RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+REORDERING_PACKET_TIMEOUT)) &&
-// (pBAEntry->list.qlen > ((pBAEntry->BAWinSize*7)/8))) //||
-// (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(10*REORDERING_PACKET_TIMEOUT))) &&
-// (pBAEntry->list.qlen > (pBAEntry->BAWinSize/8)))
+/* if ((RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+REORDERING_PACKET_TIMEOUT)) && */
+/* (pBAEntry->list.qlen > ((pBAEntry->BAWinSize*7)/8))) //|| */
+/* (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(10*REORDERING_PACKET_TIMEOUT))) && */
+/* (pBAEntry->list.qlen > (pBAEntry->BAWinSize/8))) */
if (RTMP_TIME_AFTER
((unsigned long)Now32,
(unsigned long)(pBAEntry->LastIndSeqAtTimer +
(REORDERING_PACKET_TIMEOUT)))
&& (pBAEntry->list.qlen > 0)
) {
- //
- // force LastIndSeq to shift to LastIndSeq+1
- //
+ /* */
+ /* force LastIndSeq to shift to LastIndSeq+1 */
+ /* */
Sequence = (pBAEntry->LastIndSeq + 1) & MAXSEQ;
ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, Sequence);
pBAEntry->LastIndSeqAtTimer = Now32;
pBAEntry->LastIndSeq = Sequence;
- //
- // indicate in-order mpdus
- //
+ /* */
+ /* indicate in-order mpdus */
+ /* */
Sequence =
ba_indicate_reordering_mpdus_in_order(pAd, pBAEntry,
Sequence);
IN USHORT TimeOut,
IN ULONG DelayTime, IN BOOLEAN isForced)
{
- //MLME_ADDBA_REQ_STRUCT AddbaReq;
+ /*MLME_ADDBA_REQ_STRUCT AddbaReq; */
BA_ORI_ENTRY *pBAEntry = NULL;
USHORT Idx;
BOOLEAN Cancelled;
&& (isForced == FALSE))
return;
- // if this entry is limited to use legacy tx mode, it doesn't generate BA.
+ /* if this entry is limited to use legacy tx mode, it doesn't generate BA. */
if (RTMPStaFixedTxMode(pAd, pEntry) != FIXED_TXMODE_HT)
return;
if ((pEntry->BADeclineBitmap & (1 << TID)) && (isForced == FALSE)) {
- // try again after 3 secs
+ /* try again after 3 secs */
DelayTime = 3000;
-// DBGPRINT(RT_DEBUG_TRACE, ("DeCline BA from Peer\n"));
-// return;
+/* DBGPRINT(RT_DEBUG_TRACE, ("DeCline BA from Peer\n")); */
+/* return; */
}
Idx = pEntry->BAOriWcidArray[TID];
if (Idx == 0) {
- // allocate a BA session
+ /* allocate a BA session */
pBAEntry = BATableAllocOriEntry(pAd, &Idx);
if (pBAEntry == NULL) {
DBGPRINT(RT_DEBUG_TRACE,
pEntry->BAOriWcidArray[TID] = Idx;
- // Initialize BA session
+ /* Initialize BA session */
pBAEntry->ORI_BA_Status = Originator_WaitRes;
pBAEntry->Wcid = pEntry->Aid;
pBAEntry->BAWinSize = pAd->CommonCfg.BACapability.field.RxBAWinLimit;
pBAEntry->Sequence = BA_ORI_INIT_SEQ;
- pBAEntry->Token = 1; // (2008-01-21) Jan Lee recommends it - this token can't be 0
+ pBAEntry->Token = 1; /* (2008-01-21) Jan Lee recommends it - this token can't be 0 */
pBAEntry->TID = TID;
pBAEntry->TimeOutValue = TimeOut;
pBAEntry->pAdapter = pAd;
} else
RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
- // set timer to send ADDBA request
+ /* set timer to send ADDBA request */
RTMPSetTimer(&pBAEntry->ORIBATimer, DelayTime);
}
Idx = pEntry->BAOriWcidArray[TID];
pBAEntry = &pAd->BATable.BAOriEntry[Idx];
- // Start fill in parameters.
+ /* Start fill in parameters. */
if ((Idx != 0) && (pBAEntry->TID == TID)
&& (pBAEntry->ORI_BA_Status == Originator_WaitRes)) {
pBAEntry->BAWinSize =
pBAEntry->ORI_BA_Status = Originator_Done;
pAd->BATable.numDoneOriginator++;
- // reset sequence number
+ /* reset sequence number */
pBAEntry->Sequence = BA_ORI_INIT_SEQ;
- // Set Bitmap flag.
+ /* Set Bitmap flag. */
pEntry->TXBAbitmap |= (1 << TID);
RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
- pBAEntry->ORIBATimer.TimerValue = 0; //pFrame->TimeOutValue;
+ pBAEntry->ORIBATimer.TimerValue = 0; /*pFrame->TimeOutValue; */
DBGPRINT(RT_DEBUG_TRACE,
("%s : TXBAbitmap = %x, BAWinSize = %d, TimeOut = %ld\n",
__func__, pEntry->TXBAbitmap, pBAEntry->BAWinSize,
pBAEntry->ORIBATimer.TimerValue));
- // SEND BAR ;
- NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2); //Get an unused nonpaged memory
+ /* SEND BAR ; */
+ NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("BA - BAOriSessionAdd() allocate memory failed \n"));
pAd->MacTab.Content[pBAEntry->Wcid].Addr,
pAd->CurrentAddress);
- FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
- FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
- FrameBar.BarControl.TID = pBAEntry->TID; // make sure sequence not clear in DEL funciton.
+ FrameBar.StartingSeq.field.FragNum = 0; /* make sure sequence not clear in DEL function. */
+ FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; /* make sure sequence not clear in DEL funciton. */
+ FrameBar.BarControl.TID = pBAEntry->TID; /* make sure sequence not clear in DEL funciton. */
MakeOutgoingFrame(pOutBuffer2, &FrameLen,
sizeof(FRAME_BAR), &FrameBar, END_OF_ARGS);
MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer2, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer2);
if (pBAEntry->ORIBATimer.TimerValue)
- RTMPSetTimer(&pBAEntry->ORIBATimer, pBAEntry->ORIBATimer.TimerValue); // in mSec
+ RTMPSetTimer(&pBAEntry->ORIBATimer, pBAEntry->ORIBATimer.TimerValue); /* in mSec */
}
}
USHORT Idx;
UCHAR TID;
UCHAR BAWinSize;
- //UINT32 Value;
- //UINT offset;
+ /*UINT32 Value; */
+ /*UINT offset; */
ASSERT(pEntry);
- // find TID
+ /* find TID */
TID = pFrame->BaParm.TID;
BAWinSize =
min(((UCHAR) pFrame->BaParm.BufSize),
(UCHAR) pAd->CommonCfg.BACapability.field.RxBAWinLimit);
- // Intel patch
+ /* Intel patch */
if (BAWinSize == 0) {
BAWinSize = 64;
}
pBAEntry = BATableAllocRecEntry(pAd, &Idx);
} else {
pBAEntry = &pAd->BATable.BARecEntry[Idx];
- // flush all pending reordering mpdus
+ /* flush all pending reordering mpdus */
ba_refresh_reordering_mpdus(pAd, pBAEntry);
}
pAd->BATable.numAsRecipient, Idx, pFrame->BaParm.BufSize,
BAWinSize));
- // Start fill in parameters.
+ /* Start fill in parameters. */
if (pBAEntry != NULL) {
ASSERT(pBAEntry->list.qlen == 0);
pBAEntry->TID = TID;
pBAEntry->TimeOutValue = pFrame->TimeOutValue;
pBAEntry->REC_BA_Status = Recipient_Accept;
- // initial sequence number
- pBAEntry->LastIndSeq = RESET_RCV_SEQ; //pFrame->BaStartSeq.field.StartSeq;
+ /* initial sequence number */
+ pBAEntry->LastIndSeq = RESET_RCV_SEQ; /*pFrame->BaStartSeq.field.StartSeq; */
DBGPRINT(RT_DEBUG_OFF,
("Start Seq = %08x\n",
TRUE);
}
- // Set Bitmap flag.
+ /* Set Bitmap flag. */
pEntry->RXBAbitmap |= (1 << TID);
pEntry->BARecWcidArray[TID] = Idx;
pEntry->BADeclineBitmap &= ~(1 << TID);
- // Set BA session mask in WCID table.
+ /* Set BA session mask in WCID table. */
RTMP_ADD_BA_SESSION_TO_ASIC(pAd, pEntry->Aid, TID);
DBGPRINT(RT_DEBUG_TRACE,
MAX_BARECI_SESSION));
goto done;
}
- // reserve idx 0 to identify BAWcidArray[TID] as empty
+ /* reserve idx 0 to identify BAWcidArray[TID] as empty */
for (i = 1; i < MAX_LEN_OF_BA_REC_TABLE; i++) {
pBAEntry = &pAd->BATable.BARecEntry[i];
if ((pBAEntry->REC_BA_Status == Recipient_NONE)) {
- // get one
+ /* get one */
pAd->BATable.numAsRecipient++;
pBAEntry->REC_BA_Status = Recipient_USED;
*Idx = i;
if (pAd->BATable.numAsOriginator >= (MAX_LEN_OF_BA_ORI_TABLE)) {
goto done;
}
- // reserve idx 0 to identify BAWcidArray[TID] as empty
+ /* reserve idx 0 to identify BAWcidArray[TID] as empty */
for (i = 1; i < MAX_LEN_OF_BA_ORI_TABLE; i++) {
pBAEntry = &pAd->BATable.BAOriEntry[i];
if ((pBAEntry->ORI_BA_Status == Originator_NONE)) {
- // get one
+ /* get one */
pAd->BATable.numAsOriginator++;
pBAEntry->ORI_BA_Status = Originator_USED;
pBAEntry->pAdapter = pAd;
DBGPRINT(RT_DEBUG_TRACE,
("BATableFreeOriEntry numAsOriginator= %ld\n",
pAd->BATable.numAsRecipient));
- // Erase Bitmap flag.
+ /* Erase Bitmap flag. */
}
ASSERT(pAd->BATable.numAsOriginator != 0);
if (Wcid >= MAX_LEN_OF_MAC_TABLE) {
return;
}
- //
- // Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID).
- //
+ /* */
+ /* Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID). */
+ /* */
Idx = pAd->MacTab.Content[Wcid].BAOriWcidArray[TID];
if ((Idx == 0) || (Idx >= MAX_LEN_OF_BA_ORI_TABLE)) {
if (bForceSend == TRUE) {
- // force send specified TID DelBA
+ /* force send specified TID DelBA */
MLME_DELBA_REQ_STRUCT DelbaReq;
MLME_QUEUE_ELEM *Elem =
(MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM),
DBGPRINT(RT_DEBUG_TRACE,
("\t===>Idx = %ld, Wcid=%d.TID=%d, ORI_BA_Status = %d \n", Idx,
Wcid, TID, pBAEntry->ORI_BA_Status));
- //
- // Prepare DelBA action frame and send to the peer.
- //
+ /* */
+ /* Prepare DelBA action frame and send to the peer. */
+ /* */
if ((bPassive == FALSE) && (TID == pBAEntry->TID)
&& (pBAEntry->ORI_BA_Status == Originator_Done)) {
MLME_DELBA_REQ_STRUCT DelbaReq;
BATableFreeOriEntry(pAd, Idx);
if (bPassive) {
- //BAOriSessionSetUp(pAd, &pAd->MacTab.Content[Wcid], TID, 0, 10000, TRUE);
+ /*BAOriSessionSetUp(pAd, &pAd->MacTab.Content[Wcid], TID, 0, 10000, TRUE); */
}
}
if (Wcid >= MAX_LEN_OF_MAC_TABLE) {
return;
}
- //
- // Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID).
- //
+ /* */
+ /* Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID). */
+ /* */
Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
if (Idx == 0)
return;
DBGPRINT(RT_DEBUG_TRACE,
("\t===>Idx = %ld, Wcid=%d.TID=%d, REC_BA_Status = %d \n", Idx,
Wcid, TID, pBAEntry->REC_BA_Status));
- //
- // Prepare DelBA action frame and send to the peer.
- //
+ /* */
+ /* Prepare DelBA action frame and send to the peer. */
+ /* */
if ((TID == pBAEntry->TID)
&& (pBAEntry->REC_BA_Status == Recipient_Accept)) {
MLME_DELBA_REQ_STRUCT DelbaReq;
BOOLEAN Cancelled;
- //ULONG offset;
- //UINT32 VALUE;
+ /*ULONG offset; */
+ /*UINT32 VALUE; */
RTMPCancelTimer(&pBAEntry->RECBATimer, &Cancelled);
- //
- // 1. Send DELBA Action Frame
- //
+ /* */
+ /* 1. Send DELBA Action Frame */
+ /* */
if (bPassive == FALSE) {
MLME_QUEUE_ELEM *Elem =
(MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM),
}
}
- //
- // 2. Free resource of BA session
- //
- // flush all pending reordering mpdus
+ /* */
+ /* 2. Free resource of BA session */
+ /* */
+ /* flush all pending reordering mpdus */
ba_refresh_reordering_mpdus(pAd, pBAEntry);
NdisAcquireSpinLock(&pAd->BATabLock);
- // Erase Bitmap flag.
+ /* Erase Bitmap flag. */
pBAEntry->LastIndSeq = RESET_RCV_SEQ;
pBAEntry->BAWinSize = 0;
- // Erase Bitmap flag at software mactable
+ /* Erase Bitmap flag at software mactable */
pAd->MacTab.Content[Wcid].RXBAbitmap &=
(~(1 << (pBAEntry->TID)));
pAd->MacTab.Content[Wcid].BARecWcidArray[TID] = 0;
pAd = pBAEntry->pAdapter;
{
- // Do nothing if monitor mode is on
+ /* Do nothing if monitor mode is on */
if (MONITOR_ON(pAd))
return;
}
(unsigned long)(pBAEntry->LastIndSeqAtTimer +
REC_BA_SESSION_IDLE_TIMEOUT))) {
pAd = pBAEntry->pAdapter;
- // flush all pending reordering mpdus
+ /* flush all pending reordering mpdus */
ba_refresh_reordering_mpdus(pAd, pBAEntry);
DBGPRINT(RT_DEBUG_OFF,
("%ld: REC BA session Timeout\n", Now32));
VOID PeerAddBAReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
{
- // 7.4.4.1
- //ULONG Idx;
+ /* 7.4.4.1 */
+ /*ULONG Idx; */
UCHAR Status = 1;
UCHAR pAddr[6];
FRAME_ADDBA_RSP ADDframe;
PUCHAR pOutBuffer = NULL;
NDIS_STATUS NStatus;
PFRAME_ADDBA_REQ pAddreqFrame = NULL;
- //UCHAR BufSize;
+ /*UCHAR BufSize; */
ULONG FrameLen;
PULONG ptemp;
PMAC_TABLE_ENTRY pMacEntry;
DBGPRINT(RT_DEBUG_TRACE,
("%s ==> (Wcid = %d)\n", __func__, Elem->Wcid));
- //hex_dump("AddBAReq", Elem->Msg, Elem->MsgLen);
+ /*hex_dump("AddBAReq", Elem->Msg, Elem->MsgLen); */
- //ADDBA Request from unknown peer, ignore this.
+ /*ADDBA Request from unknown peer, ignore this. */
if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
return;
pMacEntry = &pAd->MacTab.Content[Elem->Wcid];
DBGPRINT(RT_DEBUG_TRACE, ("BA - PeerAddBAReqAction----> \n"));
ptemp = (PULONG) Elem->Msg;
- //DBGPRINT_RAW(RT_DEBUG_EMU, ("%08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x\n", *(ptemp), *(ptemp+1), *(ptemp+2), *(ptemp+3), *(ptemp+4), *(ptemp+5), *(ptemp+6), *(ptemp+7), *(ptemp+8)));
+ /*DBGPRINT_RAW(RT_DEBUG_EMU, ("%08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x\n", *(ptemp), *(ptemp+1), *(ptemp+2), *(ptemp+3), *(ptemp+4), *(ptemp+5), *(ptemp+6), *(ptemp+7), *(ptemp+8))); */
if (PeerAddBAReqActionSanity(pAd, Elem->Msg, Elem->MsgLen, pAddr)) {
pAddreqFrame))
Status = 0;
else
- Status = 38; // more parameters have invalid values
+ Status = 38; /* more parameters have invalid values */
} else {
- Status = 37; // the request has been declined.
+ Status = 37; /* the request has been declined. */
}
}
ASSERT(pAd->MacTab.Content[Elem->Wcid].Sst == SST_ASSOC);
pAddreqFrame = (PFRAME_ADDBA_REQ) (&Elem->Msg[0]);
- // 2. Always send back ADDBA Response
- NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+ /* 2. Always send back ADDBA Response */
+ NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("ACTION - PeerBAAction() allocate memory failed \n"));
NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
- // 2-1. Prepare ADDBA Response frame.
+ /* 2-1. Prepare ADDBA Response frame. */
{
if (ADHOC_ON(pAd))
ActHeaderInit(pAd, &ADDframe.Hdr, pAddr,
ADDframe.Category = CATEGORY_BA;
ADDframe.Action = ADDBA_RESP;
ADDframe.Token = pAddreqFrame->Token;
- // What is the Status code?? need to check.
+ /* What is the Status code?? need to check. */
ADDframe.StatusCode = Status;
ADDframe.BaParm.BAPolicy = IMMED_BA;
ADDframe.BaParm.AMSDUSupported = 0;
if (ADDframe.BaParm.BufSize == 0) {
ADDframe.BaParm.BufSize = 64;
}
- ADDframe.TimeOutValue = 0; //pAddreqFrame->TimeOutValue;
+ ADDframe.TimeOutValue = 0; /*pAddreqFrame->TimeOutValue; */
*(USHORT *) (&ADDframe.BaParm) =
cpu2le16(*(USHORT *) (&ADDframe.BaParm));
VOID PeerAddBARspAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
{
- //UCHAR Idx, i;
- //PUCHAR pOutBuffer = NULL;
+ /*UCHAR Idx, i; */
+ /*PUCHAR pOutBuffer = NULL; */
PFRAME_ADDBA_RSP pFrame = NULL;
- //PBA_ORI_ENTRY pBAEntry;
+ /*PBA_ORI_ENTRY pBAEntry; */
- //ADDBA Response from unknown peer, ignore this.
+ /*ADDBA Response from unknown peer, ignore this. */
if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
return;
DBGPRINT(RT_DEBUG_TRACE, ("%s ==> Wcid(%d)\n", __func__, Elem->Wcid));
- //hex_dump("PeerAddBARspAction()", Elem->Msg, Elem->MsgLen);
+ /*hex_dump("PeerAddBARspAction()", Elem->Msg, Elem->MsgLen); */
if (PeerAddBARspActionSanity(pAd, Elem->Msg, Elem->MsgLen)) {
pFrame = (PFRAME_ADDBA_RSP) (&Elem->Msg[0]);
("\t\t StatusCode = %d\n", pFrame->StatusCode));
switch (pFrame->StatusCode) {
case 0:
- // I want a BAsession with this peer as an originator.
+ /* I want a BAsession with this peer as an originator. */
BAOriSessionAdd(pAd, &pAd->MacTab.Content[Elem->Wcid],
pFrame);
break;
default:
- // check status == USED ???
+ /* check status == USED ??? */
BAOriSessionTearDown(pAd, Elem->Wcid,
pFrame->BaParm.TID, TRUE, FALSE);
break;
}
- // Rcv Decline StatusCode
+ /* Rcv Decline StatusCode */
if ((pFrame->StatusCode == 37)
|| ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd)
&& (pFrame->StatusCode != 0))
VOID PeerDelBAAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
{
- //UCHAR Idx;
- //PUCHAR pOutBuffer = NULL;
+ /*UCHAR Idx; */
+ /*PUCHAR pOutBuffer = NULL; */
PFRAME_DELBA_REQ pDelFrame = NULL;
DBGPRINT(RT_DEBUG_TRACE, ("%s ==>\n", __func__));
- //DELBA Request from unknown peer, ignore this.
+ /*DELBA Request from unknown peer, ignore this. */
if (PeerDelBAActionSanity(pAd, Elem->Wcid, Elem->Msg, Elem->MsgLen)) {
pDelFrame = (PFRAME_DELBA_REQ) (&Elem->Msg[0]);
if (pDelFrame->DelbaParm.Initiator == ORIGINATOR) {
DBGPRINT(RT_DEBUG_TRACE,
("BA - PeerDelBAAction----> RECIPIENT, Reason = %d\n",
pDelFrame->ReasonCode));
- //hex_dump("DelBA Frame", pDelFrame, Elem->MsgLen);
+ /*hex_dump("DelBA Frame", pDelFrame, Elem->MsgLen); */
BAOriSessionTearDown(pAd, Elem->Wcid,
pDelFrame->DelbaParm.TID, TRUE,
FALSE);
IN ULONG MsgLen, IN PFRAME_BA_REQ pMsg)
{
PFRAME_BA_REQ pFrame = pMsg;
- //PRTMP_REORDERBUF pBuffer;
- //PRTMP_REORDERBUF pDmaBuf;
+ /*PRTMP_REORDERBUF pBuffer; */
+ /*PRTMP_REORDERBUF pDmaBuf; */
PBA_REC_ENTRY pBAEntry;
- //BOOLEAN Result;
+ /*BOOLEAN Result; */
ULONG Idx;
- //UCHAR NumRxPkt;
- UCHAR TID; //, i;
+ /*UCHAR NumRxPkt; */
+ UCHAR TID; /*, i; */
TID = (UCHAR) pFrame->BARControl.TID;
DBGPRINT(RT_DEBUG_TRACE,
("%s(): BAR-Wcid(%ld), Tid (%d)\n", __func__, Wcid, TID));
- //hex_dump("BAR", (PCHAR) pFrame, MsgLen);
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /*hex_dump("BAR", (PCHAR) pFrame, MsgLen); */
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
return FALSE;
- // First check the size, it MUST not exceed the mlme queue size
+ /* First check the size, it MUST not exceed the mlme queue size */
if (MsgLen > MGMT_DMA_BUFFER_SIZE) {
DBGPRINT_ERR(("CntlEnqueueForRecv: frame too large, size = %ld \n", MsgLen));
return FALSE;
}
if ((Wcid < MAX_LEN_OF_MAC_TABLE) && (TID < 8)) {
- // if this receiving packet is from SA that is in our OriEntry. Since WCID <9 has direct mapping. no need search.
+ /* if this receiving packet is from SA that is in our OriEntry. Since WCID <9 has direct mapping. no need search. */
Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
pBAEntry = &pAd->BATable.BARecEntry[Idx];
} else {
if (SEQ_SMALLER
(pBAEntry->LastIndSeq, pFrame->BAStartingSeq.field.StartSeq,
MAXSEQ)) {
- //DBGPRINT(RT_DEBUG_TRACE, ("BAR Seq = %x, LastIndSeq = %x\n", pFrame->BAStartingSeq.field.StartSeq, pBAEntry->LastIndSeq));
+ /*DBGPRINT(RT_DEBUG_TRACE, ("BAR Seq = %x, LastIndSeq = %x\n", pFrame->BAStartingSeq.field.StartSeq, pBAEntry->LastIndSeq)); */
ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry,
pFrame->BAStartingSeq.field.
StartSeq);
(pFrame->BAStartingSeq.field.StartSeq ==
0) ? MAXSEQ : (pFrame->BAStartingSeq.field.StartSeq - 1);
}
- //ba_refresh_reordering_mpdus(pAd, pBAEntry);
+ /*ba_refresh_reordering_mpdus(pAd, pBAEntry); */
return TRUE;
}
{
PUCHAR pOutBuffer = NULL;
NDIS_STATUS NStatus;
- //ULONG Idx;
+ /*ULONG Idx; */
FRAME_PSMP_ACTION Frame;
ULONG FrameLen;
- NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_ERROR,
("BA - MlmeADDBAAction() allocate memory failed \n"));
|| pAd->Antenna.field.TxPath > 1)) {
RTMP_ASIC_MMPS_DISABLE(pAd);
}
-#endif // RT30xx //
+#endif /* RT30xx // */
Frame.Psmp = 0;
break;
case MMPS_DYNAMIC:
|| pAd->Antenna.field.TxPath > 1)) {
RTMP_ASIC_MMPS_ENABLE(pAd);
}
-#endif // RT30xx //
+#endif /* RT30xx // */
Frame.Psmp = 1;
break;
}
UCHAR BSSID[MAC_ADDR_LEN];
UCHAR ReportingCondition;
UCHAR Threshold;
- UCHAR SSIDIE[2]; // 2 byte
+ UCHAR SSIDIE[2]; /* 2 byte */
} BEACON_REQUEST;
typedef struct PACKED {
PNDIS_PACKET pRxPkt;
UCHAR Header802_3[LENGTH_802_3];
- // 1. get 802.3 Header
- // 2. remove LLC
- // a. pointer pRxBlk->pData to payload
- // b. modify pRxBlk->DataSize
+ /* 1. get 802.3 Header */
+ /* 2. remove LLC */
+ /* a. pointer pRxBlk->pData to payload */
+ /* b. modify pRxBlk->DataSize */
RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
SET_OS_PKT_LEN(pRxPkt, pRxBlk->DataSize);
SET_OS_PKT_DATATAIL(pRxPkt, pRxBlk->pData, pRxBlk->DataSize);
- //
- // copy 802.3 header, if necessary
- //
+ /* */
+ /* copy 802.3 header, if necessary */
+ /* */
if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)) {
{
#ifdef LINUX
mpdu_blk = ba_mpdu_blk_alloc(pAd);
if ((mpdu_blk != NULL) && (!RX_BLK_TEST_FLAG(pRxBlk, fRX_EAP))) {
- // Write RxD buffer address & allocated buffer length
+ /* Write RxD buffer address & allocated buffer length */
NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
mpdu_blk->Sequence = Sequence;
STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);
- //
- // it is necessary for reordering packet to record
- // which BSS it come from
- //
+ /* */
+ /* it is necessary for reordering packet to record */
+ /* which BSS it come from */
+ /* */
RTMP_SET_PACKET_IF(pRxBlk->pRxPacket, FromWhichBSSID);
mpdu_blk->pPacket = pRxBlk->pRxPacket;
if (ba_reordering_mpdu_insertsorted(&pBAEntry->list, mpdu_blk)
== FALSE) {
- // had been already within reordering list
- // don't indicate
+ /* had been already within reordering list */
+ /* don't indicate */
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_SUCCESS);
ba_mpdu_blk_free(pAd, mpdu_blk);
* and receving mpdu to upper layer
* make tcp/ip to take care reordering mechanism
*/
- //ba_refresh_reordering_mpdus(pAd, pBAEntry);
+ /*ba_refresh_reordering_mpdus(pAd, pBAEntry); */
ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, Sequence);
pBAEntry->LastIndSeq = Sequence;
if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)
&& (pRxBlk->DataSize > MAX_RX_PKT_LEN)) {
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
return;
}
pBAEntry = &pAd->BATable.BARecEntry[Idx];
} else {
- // impossible !!!
+ /* impossible !!! */
ASSERT(0);
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
return;
ASSERT(pBAEntry);
- // update last rx time
+ /* update last rx time */
NdisGetSystemUpTime(&Now32);
pBAEntry->rcvSeq = Sequence;
ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32);
pBAEntry->LastIndSeqAtTimer = Now32;
- //
- // Reset Last Indicate Sequence
- //
+ /* */
+ /* Reset Last Indicate Sequence */
+ /* */
if (pBAEntry->LastIndSeq == RESET_RCV_SEQ) {
ASSERT((pBAEntry->list.qlen == 0)
&& (pBAEntry->list.next == NULL));
- // reset rcv sequence of BA session
+ /* reset rcv sequence of BA session */
pBAEntry->LastIndSeq = Sequence;
pBAEntry->LastIndSeqAtTimer = Now32;
INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
return;
}
- //
- // I. Check if in order.
- //
+ /* */
+ /* I. Check if in order. */
+ /* */
if (SEQ_STEPONE(Sequence, pBAEntry->LastIndSeq, MAXSEQ)) {
USHORT LastIndSeq;
}
pBAEntry->LastIndSeqAtTimer = Now32;
}
- //
- // II. Drop Duplicated Packet
- //
+ /* */
+ /* II. Drop Duplicated Packet */
+ /* */
else if (Sequence == pBAEntry->LastIndSeq) {
- // drop and release packet
+ /* drop and release packet */
pBAEntry->nDropPacket++;
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
}
- //
- // III. Drop Old Received Packet
- //
+ /* */
+ /* III. Drop Old Received Packet */
+ /* */
else if (SEQ_SMALLER(Sequence, pBAEntry->LastIndSeq, MAXSEQ)) {
- // drop and release packet
+ /* drop and release packet */
pBAEntry->nDropPacket++;
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
}
- //
- // IV. Receive Sequence within Window Size
- //
+ /* */
+ /* IV. Receive Sequence within Window Size */
+ /* */
else if (SEQ_SMALLER
(Sequence,
(((pBAEntry->LastIndSeq + pBAEntry->BAWinSize + 1)) & MAXSEQ),
ba_enqueue_reordering_packet(pAd, pBAEntry, pRxBlk,
FromWhichBSSID);
}
- //
- // V. Receive seq surpasses Win(lastseq + nMSDU). So refresh all reorder buffer
- //
+ /* */
+ /* V. Receive seq surpasses Win(lastseq + nMSDU). So refresh all reorder buffer */
+ /* */
else {
LONG WinStartSeq, TmpSeq;
}
WinStartSeq = (TmpSeq + 1) & MAXSEQ;
ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, WinStartSeq);
- pBAEntry->LastIndSeq = WinStartSeq; //TmpSeq;
+ pBAEntry->LastIndSeq = WinStartSeq; /*TmpSeq; */
pBAEntry->LastIndSeqAtTimer = Now32;
mic_header2[4] = mpdu[20];
mic_header2[5] = mpdu[21];
- // In Sequence Control field, mute sequence numer bits (12-bit)
+ /* In Sequence Control field, mute sequence numer bits (12-bit) */
mic_header2[6] = mpdu[22] & 0x0f; /* SC */
mic_header2[7] = 0x00; /* mpdu[23]; */
for (i = 8; i < 14; i++)
ctr_preload[i] = pn_vector[13 - i]; /* ctr_preload[8:13] = PN[5:0] */
#endif
- ctr_preload[14] = (unsigned char)(c / 256); // Ctr
+ ctr_preload[14] = (unsigned char)(c / 256); /* Ctr */
ctr_preload[15] = (unsigned char)(c % 256);
}
PN[4] = *(pData + HeaderLen + 6);
PN[5] = *(pData + HeaderLen + 7);
- payload_len = DataByteCnt - HeaderLen - 8 - 8; // 8 bytes for CCMP header , 8 bytes for MIC
+ payload_len = DataByteCnt - HeaderLen - 8 - 8; /* 8 bytes for CCMP header , 8 bytes for MIC */
payload_remainder = (payload_len) % 16;
num_blocks = (payload_len) / 16;
- // Find start of payload
- payload_index = HeaderLen + 8; //IV+EIV
+ /* Find start of payload */
+ payload_index = HeaderLen + 8; /*IV+EIV */
for (i = 0; i < num_blocks; i++) {
construct_ctr_preload(ctr_preload,
payload_index += 16;
}
- //
- // If there is a short final block, then pad it
- // encrypt it and copy the unpadded part back
- //
+ /* */
+ /* If there is a short final block, then pad it */
+ /* encrypt it and copy the unpadded part back */
+ /* */
if (payload_remainder > 0) {
construct_ctr_preload(ctr_preload,
a4_exists,
payload_remainder);
payload_index += payload_remainder;
}
- //
- // Descrypt the MIC
- //
+ /* */
+ /* Descrypt the MIC */
+ /* */
construct_ctr_preload(ctr_preload, a4_exists, qc_exists, pData, PN, 0);
NdisZeroMemory(padded_buffer, 16);
NdisMoveMemory(padded_buffer, pData + payload_index, 8);
NdisMoveMemory(TrailMIC, chain_buffer, 8);
- //
- // Calculate MIC
- //
+ /* */
+ /* Calculate MIC */
+ /* */
- //Force the protected frame bit on
+ /*Force the protected frame bit on */
*(pData + 1) = *(pData + 1) | 0x40;
- // Find start of payload
- // Because the CCMP header has been removed
+ /* Find start of payload */
+ /* Because the CCMP header has been removed */
payload_index = HeaderLen;
construct_mic_iv(mic_iv, qc_exists, a4_exists, pData, payload_len, PN);
bitwise_xor(aes_out, mic_header2, chain_buffer);
aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
- // iterate through each 16 byte payload block
+ /* iterate through each 16 byte payload block */
for (i = 0; i < num_blocks; i++) {
bitwise_xor(aes_out, pData + payload_index, chain_buffer);
payload_index += 16;
aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
}
- // Add on the final payload block if it needs padding
+ /* Add on the final payload block if it needs padding */
if (payload_remainder > 0) {
NdisZeroMemory(padded_buffer, 16);
NdisMoveMemory(padded_buffer, pData + payload_index,
bitwise_xor(aes_out, padded_buffer, chain_buffer);
aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
}
- // aes_out contains padded mic, discard most significant
- // 8 bytes to generate 64 bit MIC
+ /* aes_out contains padded mic, discard most significant */
+ /* 8 bytes to generate 64 bit MIC */
for (i = 0; i < 8; i++)
MIC[i] = aes_out[i];
if (!NdisEqualMemory(MIC, TrailMIC, 8)) {
- DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptAES, MIC Error !\n")); //MIC error.
+ DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptAES, MIC Error !\n")); /*MIC error. */
return FALSE;
}
{
UCHAR A[8], BIN[16], BOUT[16];
UCHAR R[512];
- INT num_blocks = p_len / 8; // unit:64bits
+ INT num_blocks = p_len / 8; /* unit:64bits */
INT i, j;
aes_context aesctx;
UCHAR xor;
rt_aes_set_key(&aesctx, key, 128);
- // Init IA
+ /* Init IA */
for (i = 0; i < 8; i++)
A[i] = 0xa6;
- //Input plaintext
+ /*Input plaintext */
for (i = 0; i < num_blocks; i++) {
for (j = 0; j < 8; j++)
R[8 * (i + 1) + j] = plaintext[8 * i + j];
}
- // Key Mix
+ /* Key Mix */
for (j = 0; j < 6; j++) {
for (i = 1; i <= num_blocks; i++) {
- //phase 1
+ /*phase 1 */
NdisMoveMemory(BIN, A, 8);
NdisMoveMemory(&BIN[8], &R[8 * i], 8);
rt_aes_encrypt(&aesctx, BIN, BOUT);
}
}
- // Output ciphertext
+ /* Output ciphertext */
NdisMoveMemory(ciphertext, A, 8);
for (i = 1; i <= num_blocks; i++) {
INT i, j;
aes_context aesctx;
UCHAR *R;
- INT num_blocks = c_len / 8; // unit:64bits
+ INT num_blocks = c_len / 8; /* unit:64bits */
os_alloc_mem(NULL, (PUCHAR *) & R, 512);
return;
}
/* End of if */
- // Initialize
+ /* Initialize */
NdisMoveMemory(A, ciphertext, 8);
- //Input plaintext
+ /*Input plaintext */
for (i = 0; i < (c_len - 8); i++) {
R[i] = ciphertext[i + 8];
}
}
}
- // OUTPUT
+ /* OUTPUT */
for (i = 0; i < c_len; i++) {
plaintext[i] = R[i];
}
#include "../rt_config.h"
-// Reset the RFIC setting to new series
+/* Reset the RFIC setting to new series */
RTMP_RF_REGS RF2850RegTable[] = {
-// ch R1 R2 R3(TX0~4=0) R4
+/* ch R1 R2 R3(TX0~4=0) R4 */
{1, 0x98402ecc, 0x984c0786, 0x9816b455, 0x9800510b}
,
{2, 0x98402ecc, 0x984c0786, 0x98168a55, 0x9800519f}
{14, 0x98402ecc, 0x984c07a2, 0x98168a55, 0x98005193}
,
- // 802.11 UNI / HyperLan 2
+ /* 802.11 UNI / HyperLan 2 */
{36, 0x98402ecc, 0x984c099a, 0x98158a55, 0x980ed1a3}
,
{38, 0x98402ecc, 0x984c099e, 0x98158a55, 0x980ed193}
{62, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed193}
,
{64, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed1a3}
- , // Plugfest#4, Day4, change RFR3 left4th 9->5.
+ , /* Plugfest#4, Day4, change RFR3 left4th 9->5. */
- // 802.11 HyperLan 2
+ /* 802.11 HyperLan 2 */
{100, 0x98402ec8, 0x984c06b2, 0x98178a55, 0x980ed783}
,
- // 2008.04.30 modified
- // The system team has AN to improve the EVM value
- // for channel 102 to 108 for the RT2850/RT2750 dual band solution.
+ /* 2008.04.30 modified */
+ /* The system team has AN to improve the EVM value */
+ /* for channel 102 to 108 for the RT2850/RT2750 dual band solution. */
{102, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed793}
,
{104, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed1a3}
{124, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed193}
,
{126, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed15b}
- , // 0x980ed1bb->0x980ed15b required by Rory 20070927
+ , /* 0x980ed1bb->0x980ed15b required by Rory 20070927 */
{128, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed1a3}
,
{132, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed18b}
{140, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed183}
,
- // 802.11 UNII
+ /* 802.11 UNII */
{149, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed1a7}
,
{151, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed187}
{173, 0x98402ec4, 0x984c03d6, 0x98179855, 0x9815530f}
,
- // Japan
+ /* Japan */
{184, 0x95002ccc, 0x9500491e, 0x9509be55, 0x950c0a0b}
,
{188, 0x95002ccc, 0x95004922, 0x9509be55, 0x950c0a13}
{216, 0x95002ccc, 0x95004982, 0x9509be55, 0x950c0a23}
,
- // still lack of MMAC(Japan) ch 34,38,42,46
+ /* still lack of MMAC(Japan) ch 34,38,42,46 */
};
UCHAR NUM_OF_2850_CHNL = (sizeof(RF2850RegTable) / sizeof(RTMP_RF_REGS));
FREQUENCY_ITEM FreqItems3020[] = {
/**************************************************/
- // ISM : 2.4 to 2.483 GHz //
+ /* ISM : 2.4 to 2.483 GHz // */
/**************************************************/
- // 11g
+ /* 11g */
/**************************************************/
- //-CH---N-------R---K-----------
+ /*-CH---N-------R---K----------- */
{1, 241, 2, 2}
,
{2, 241, 2, 7}
LG_FBK_CFG1_STRUC LgCfg1;
PRTMP_TX_RATE_SWITCH pCurrTxRate, pNextTxRate;
- // set to initial value
+ /* set to initial value */
HtCfg0.word = 0x65432100;
HtCfg1.word = 0xedcba988;
LgCfg0.word = 0xedcba988;
for (i = 1; i < *((PUCHAR) pRateTable); i++) {
pCurrTxRate = (PRTMP_TX_RATE_SWITCH) pRateTable + 1 + i;
switch (pCurrTxRate->Mode) {
- case 0: //CCK
+ case 0: /*CCK */
break;
- case 1: //OFDM
+ case 1: /*OFDM */
{
switch (pCurrTxRate->CurrMCS) {
case 0:
}
}
break;
- case 2: //HT-MIX
- case 3: //HT-GF
+ case 2: /*HT-MIX */
+ case 3: /*HT-GF */
{
if ((pNextTxRate->Mode >= MODE_HTMIX)
&& (pCurrTxRate->CurrMCS !=
}
if (pAd->BATable.numDoneOriginator) {
- //
- // enable the RTS/CTS to avoid channel collision
- //
+ /* */
+ /* enable the RTS/CTS to avoid channel collision */
+ /* */
SetMask = ALLN_SETPROTECT;
OperationMode = 8;
}
- // Config ASIC RTS threshold register
+ /* Config ASIC RTS threshold register */
RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
MacReg &= 0xFF0000FF;
- // If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+ /* If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096 */
if (((pAd->CommonCfg.BACapability.field.AmsduEnable) ||
(pAd->CommonCfg.bAggregationCapable == TRUE))
&& pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD) {
RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
- // Initial common protection settings
+ /* Initial common protection settings */
RTMPZeroMemory(Protect, sizeof(Protect));
ProtCfg4.word = 0;
ProtCfg.word = 0;
ProtCfg.field.RTSThEn = 1;
ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
- // update PHY mode and rate
+ /* update PHY mode and rate */
if (pAd->CommonCfg.Channel > 14)
ProtCfg.field.ProtectRate = 0x4000;
ProtCfg.field.ProtectRate |= pAd->CommonCfg.RtsRate;
- // Handle legacy(B/G) protection
+ /* Handle legacy(B/G) protection */
if (bDisableBGProtect) {
- //ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
+ /*ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate; */
ProtCfg.field.ProtectCtrl = 0;
Protect[0] = ProtCfg.word;
Protect[1] = ProtCfg.word;
pAd->FlgCtsEnabled = 0; /* CTS-self is not used */
} else {
- //ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
- ProtCfg.field.ProtectCtrl = 0; // CCK do not need to be protected
+ /*ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate; */
+ ProtCfg.field.ProtectCtrl = 0; /* CCK do not need to be protected */
Protect[0] = ProtCfg.word;
- ProtCfg.field.ProtectCtrl = ASIC_CTS; // OFDM needs using CCK to protect
+ ProtCfg.field.ProtectCtrl = ASIC_CTS; /* OFDM needs using CCK to protect */
Protect[1] = ProtCfg.word;
pAd->FlgCtsEnabled = 1; /* CTS-self is used */
}
- // Decide HT frame protection.
+ /* Decide HT frame protection. */
if ((SetMask & ALLN_SETPROTECT) != 0) {
switch (OperationMode) {
case 0x0:
- // NO PROTECT
- // 1.All STAs in the BSS are 20/40 MHz HT
- // 2. in ai 20/40MHz BSS
- // 3. all STAs are 20MHz in a 20MHz BSS
- // Pure HT. no protection.
-
- // MM20_PROT_CFG
- // Reserved (31:27)
- // PROT_TXOP(25:20) -- 010111
- // PROT_NAV(19:18) -- 01 (Short NAV protection)
- // PROT_CTRL(17:16) -- 00 (None)
- // PROT_RATE(15:0) -- 0x4004 (OFDM 24M)
+ /* NO PROTECT */
+ /* 1.All STAs in the BSS are 20/40 MHz HT */
+ /* 2. in ai 20/40MHz BSS */
+ /* 3. all STAs are 20MHz in a 20MHz BSS */
+ /* Pure HT. no protection. */
+
+ /* MM20_PROT_CFG */
+ /* Reserved (31:27) */
+ /* PROT_TXOP(25:20) -- 010111 */
+ /* PROT_NAV(19:18) -- 01 (Short NAV protection) */
+ /* PROT_CTRL(17:16) -- 00 (None) */
+ /* PROT_RATE(15:0) -- 0x4004 (OFDM 24M) */
Protect[2] = 0x01744004;
- // MM40_PROT_CFG
- // Reserved (31:27)
- // PROT_TXOP(25:20) -- 111111
- // PROT_NAV(19:18) -- 01 (Short NAV protection)
- // PROT_CTRL(17:16) -- 00 (None)
- // PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M)
+ /* MM40_PROT_CFG */
+ /* Reserved (31:27) */
+ /* PROT_TXOP(25:20) -- 111111 */
+ /* PROT_NAV(19:18) -- 01 (Short NAV protection) */
+ /* PROT_CTRL(17:16) -- 00 (None) */
+ /* PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M) */
Protect[3] = 0x03f44084;
- // CF20_PROT_CFG
- // Reserved (31:27)
- // PROT_TXOP(25:20) -- 010111
- // PROT_NAV(19:18) -- 01 (Short NAV protection)
- // PROT_CTRL(17:16) -- 00 (None)
- // PROT_RATE(15:0) -- 0x4004 (OFDM 24M)
+ /* CF20_PROT_CFG */
+ /* Reserved (31:27) */
+ /* PROT_TXOP(25:20) -- 010111 */
+ /* PROT_NAV(19:18) -- 01 (Short NAV protection) */
+ /* PROT_CTRL(17:16) -- 00 (None) */
+ /* PROT_RATE(15:0) -- 0x4004 (OFDM 24M) */
Protect[4] = 0x01744004;
- // CF40_PROT_CFG
- // Reserved (31:27)
- // PROT_TXOP(25:20) -- 111111
- // PROT_NAV(19:18) -- 01 (Short NAV protection)
- // PROT_CTRL(17:16) -- 00 (None)
- // PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M)
+ /* CF40_PROT_CFG */
+ /* Reserved (31:27) */
+ /* PROT_TXOP(25:20) -- 111111 */
+ /* PROT_NAV(19:18) -- 01 (Short NAV protection) */
+ /* PROT_CTRL(17:16) -- 00 (None) */
+ /* PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M) */
Protect[5] = 0x03f44084;
if (bNonGFExist) {
- // PROT_NAV(19:18) -- 01 (Short NAV protectiion)
- // PROT_CTRL(17:16) -- 01 (RTS/CTS)
+ /* PROT_NAV(19:18) -- 01 (Short NAV protectiion) */
+ /* PROT_CTRL(17:16) -- 01 (RTS/CTS) */
Protect[4] = 0x01754004;
Protect[5] = 0x03f54084;
}
break;
case 1:
- // This is "HT non-member protection mode."
- // If there may be non-HT STAs my BSS
- ProtCfg.word = 0x01744004; // PROT_CTRL(17:16) : 0 (None)
- ProtCfg4.word = 0x03f44084; // duplicaet legacy 24M. BW set 1.
+ /* This is "HT non-member protection mode." */
+ /* If there may be non-HT STAs my BSS */
+ ProtCfg.word = 0x01744004; /* PROT_CTRL(17:16) : 0 (None) */
+ ProtCfg4.word = 0x03f44084; /* duplicaet legacy 24M. BW set 1. */
if (OPSTATUS_TEST_FLAG
(pAd, fOP_STATUS_BG_PROTECTION_INUSED)) {
- ProtCfg.word = 0x01740003; //ERP use Protection bit is set, use protection rate at Clause 18..
- ProtCfg4.word = 0x03f40003; // Don't duplicate RTS/CTS in CCK mode. 0x03f40083;
+ ProtCfg.word = 0x01740003; /*ERP use Protection bit is set, use protection rate at Clause 18.. */
+ ProtCfg4.word = 0x03f40003; /* Don't duplicate RTS/CTS in CCK mode. 0x03f40083; */
}
- //Assign Protection method for 20&40 MHz packets
+ /*Assign Protection method for 20&40 MHz packets */
ProtCfg.field.ProtectCtrl = ASIC_RTS;
ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
ProtCfg4.field.ProtectCtrl = ASIC_RTS;
break;
case 2:
- // If only HT STAs are in BSS. at least one is 20MHz. Only protect 40MHz packets
- ProtCfg.word = 0x01744004; // PROT_CTRL(17:16) : 0 (None)
- ProtCfg4.word = 0x03f44084; // duplicaet legacy 24M. BW set 1.
+ /* If only HT STAs are in BSS. at least one is 20MHz. Only protect 40MHz packets */
+ ProtCfg.word = 0x01744004; /* PROT_CTRL(17:16) : 0 (None) */
+ ProtCfg4.word = 0x03f44084; /* duplicaet legacy 24M. BW set 1. */
- //Assign Protection method for 40MHz packets
+ /*Assign Protection method for 40MHz packets */
ProtCfg4.field.ProtectCtrl = ASIC_RTS;
ProtCfg4.field.ProtectNav = ASIC_SHORTNAV;
Protect[2] = ProtCfg.word;
break;
case 3:
- // HT mixed mode. PROTECT ALL!
- // Assign Rate
- ProtCfg.word = 0x01744004; //duplicaet legacy 24M. BW set 1.
+ /* HT mixed mode. PROTECT ALL! */
+ /* Assign Rate */
+ ProtCfg.word = 0x01744004; /*duplicaet legacy 24M. BW set 1. */
ProtCfg4.word = 0x03f44084;
- // both 20MHz and 40MHz are protected. Whether use RTS or CTS-to-self depends on the
+ /* both 20MHz and 40MHz are protected. Whether use RTS or CTS-to-self depends on the */
if (OPSTATUS_TEST_FLAG
(pAd, fOP_STATUS_BG_PROTECTION_INUSED)) {
- ProtCfg.word = 0x01740003; //ERP use Protection bit is set, use protection rate at Clause 18..
- ProtCfg4.word = 0x03f40003; // Don't duplicate RTS/CTS in CCK mode. 0x03f40083
+ ProtCfg.word = 0x01740003; /*ERP use Protection bit is set, use protection rate at Clause 18.. */
+ ProtCfg4.word = 0x03f40003; /* Don't duplicate RTS/CTS in CCK mode. 0x03f40083 */
}
- //Assign Protection method for 20&40 MHz packets
+ /*Assign Protection method for 20&40 MHz packets */
ProtCfg.field.ProtectCtrl = ASIC_RTS;
ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
ProtCfg4.field.ProtectCtrl = ASIC_RTS;
break;
case 8:
- // Special on for Atheros problem n chip.
+ /* Special on for Atheros problem n chip. */
Protect[2] = 0x01754004;
Protect[3] = 0x03f54084;
Protect[4] = 0x01754004;
VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
{
ULONG R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0;
- CHAR TxPwer = 0, TxPwer2 = DEFAULT_RF_TX_POWER; //Bbp94 = BBPR94_DEFAULT, TxPwer2 = DEFAULT_RF_TX_POWER;
+ CHAR TxPwer = 0, TxPwer2 = DEFAULT_RF_TX_POWER; /*Bbp94 = BBPR94_DEFAULT, TxPwer2 = DEFAULT_RF_TX_POWER; */
UCHAR index;
- UINT32 Value = 0; //BbpReg, Value;
+ UINT32 Value = 0; /*BbpReg, Value; */
RTMP_RF_REGS *RFRegTable;
UCHAR RFValue;
RFValue = 0;
- // Search Tx power value
- // We can't use ChannelList to search channel, since some central channl's txpowr doesn't list
- // in ChannelList, so use TxPower array instead.
- //
+ /* Search Tx power value */
+ /* We can't use ChannelList to search channel, since some central channl's txpowr doesn't list */
+ /* in ChannelList, so use TxPower array instead. */
+ /* */
for (index = 0; index < MAX_NUM_OF_CHANNELS; index++) {
if (Channel == pAd->TxPower[index].Channel) {
TxPwer = pAd->TxPower[index].Power;
Channel));
}
#ifdef RT30xx
- // The RF programming sequence is difference between 3xxx and 2xxx
+ /* The RF programming sequence is difference between 3xxx and 2xxx */
if ((IS_RT3070(pAd) || IS_RT3090(pAd) || IS_RT3390(pAd))
&& ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)
|| (pAd->RfIcType == RFIC_3021)
for (index = 0; index < NUM_OF_3020_CHNL; index++) {
if (Channel == FreqItems3020[index].Channel) {
- // Programming channel parameters
+ /* Programming channel parameters */
RT30xxWriteRFRegister(pAd, RF_R02,
FreqItems3020[index].N);
RT30xxWriteRFRegister(pAd, RF_R03,
(RFValue & 0xFC) | FreqItems3020[index].R;
RT30xxWriteRFRegister(pAd, RF_R06, RFValue);
- // Set Tx0 Power
+ /* Set Tx0 Power */
RT30xxReadRFRegister(pAd, RF_R12, &RFValue);
RFValue = (RFValue & 0xE0) | TxPwer;
RT30xxWriteRFRegister(pAd, RF_R12, RFValue);
- // Set Tx1 Power
+ /* Set Tx1 Power */
RT30xxReadRFRegister(pAd, RF_R13, &RFValue);
RFValue = (RFValue & 0xE0) | TxPwer2;
RT30xxWriteRFRegister(pAd, RF_R13, RFValue);
- // Tx/Rx Stream setting
+ /* Tx/Rx Stream setting */
RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
- //if (IS_RT3090(pAd))
- // RFValue |= 0x01; // Enable RF block.
- RFValue &= 0x03; //clear bit[7~2]
+ /*if (IS_RT3090(pAd)) */
+ /* RFValue |= 0x01; // Enable RF block. */
+ RFValue &= 0x03; /*clear bit[7~2] */
if (pAd->Antenna.field.TxPath == 1)
RFValue |= 0xA0;
else if (pAd->Antenna.field.TxPath == 2)
RFValue |= 0x40;
RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
- // Set RF offset
+ /* Set RF offset */
RT30xxReadRFRegister(pAd, RF_R23, &RFValue);
RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
RT30xxWriteRFRegister(pAd, RF_R23, RFValue);
- // Set BW
+ /* Set BW */
if (!bScan
&& (pAd->CommonCfg.BBPCurrentBW == BW_40)) {
RFValue = pAd->Mlme.CaliBW40RfR24;
- //DISABLE_11N_CHECK(pAd);
+ /*DISABLE_11N_CHECK(pAd); */
} else {
RFValue = pAd->Mlme.CaliBW20RfR24;
}
RT30xxWriteRFRegister(pAd, RF_R24, RFValue);
RT30xxWriteRFRegister(pAd, RF_R31, RFValue);
- // Enable RF tuning
+ /* Enable RF tuning */
RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
RFValue = RFValue | 0x1;
RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
- // latch channel for future usage.
+ /* latch channel for future usage. */
pAd->LatchRfRegs.Channel = Channel;
DBGPRINT(RT_DEBUG_TRACE,
}
}
} else
-#endif // RT30xx //
+#endif /* RT30xx // */
{
RFRegTable = RF2850RegTable;
switch (pAd->RfIcType) {
if (Channel == RFRegTable[index].Channel) {
R2 = RFRegTable[index].R2;
if (pAd->Antenna.field.TxPath == 1) {
- R2 |= 0x4000; // If TXpath is 1, bit 14 = 1;
+ R2 |= 0x4000; /* If TXpath is 1, bit 14 = 1; */
}
if (pAd->Antenna.field.RxPath == 2) {
- R2 |= 0x40; // write 1 to off Rxpath.
+ R2 |= 0x40; /* write 1 to off Rxpath. */
} else if (pAd->Antenna.field.RxPath ==
1) {
- R2 |= 0x20040; // write 1 to off RxPath
+ R2 |= 0x20040; /* write 1 to off RxPath */
}
if (Channel > 14) {
- // initialize R3, R4
+ /* initialize R3, R4 */
R3 = (RFRegTable[index].
R3 & 0xffffc1ff);
R4 = (RFRegTable[index].
R4 & (~0x001f87c0)) |
(pAd->RfFreqOffset << 15);
- // 5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
- // R3
+ /* 5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB */
+ /* R3 */
if ((TxPwer >= -7)
&& (TxPwer < 0)) {
TxPwer = (7 + TxPwer);
9);
}
- // R4
+ /* R4 */
if ((TxPwer2 >= -7)
&& (TxPwer2 < 0)) {
TxPwer2 = (7 + TxPwer2);
6);
}
} else {
- R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0
- R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15) | (TxPwer2 << 6); // Set freq Offset & TxPwr1
+ R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); /* set TX power0 */
+ R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15) | (TxPwer2 << 6); /* Set freq Offset & TxPwr1 */
}
- // Based on BBP current mode before changing RF channel.
+ /* Based on BBP current mode before changing RF channel. */
if (!bScan
&& (pAd->CommonCfg.BBPCurrentBW ==
BW_40)) {
R4 |= 0x200000;
}
- // Update variables
+ /* Update variables */
pAd->LatchRfRegs.Channel = Channel;
pAd->LatchRfRegs.R1 =
RFRegTable[index].R1;
pAd->LatchRfRegs.R3 = R3;
pAd->LatchRfRegs.R4 = R4;
- // Set RF value 1's set R3[bit2] = [0]
+ /* Set RF value 1's set R3[bit2] = [0] */
RTMP_RF_IO_WRITE32(pAd,
pAd->LatchRfRegs.R1);
RTMP_RF_IO_WRITE32(pAd,
RTMPusecDelay(200);
- // Set RF value 2's set R3[bit2] = [1]
+ /* Set RF value 2's set R3[bit2] = [1] */
RTMP_RF_IO_WRITE32(pAd,
pAd->LatchRfRegs.R1);
RTMP_RF_IO_WRITE32(pAd,
RTMPusecDelay(200);
- // Set RF value 3's set R3[bit2] = [0]
+ /* Set RF value 3's set R3[bit2] = [0] */
RTMP_RF_IO_WRITE32(pAd,
pAd->LatchRfRegs.R1);
RTMP_RF_IO_WRITE32(pAd,
pAd->LatchRfRegs.R3, pAd->LatchRfRegs.R4));
}
- // Change BBP setting during siwtch from a->g, g->a
+ /* Change BBP setting during siwtch from a->g, g->a */
if (Channel <= 14) {
- ULONG TxPinCfg = 0x00050F0A; //Gary 2007/08/09 0x050A0A
+ ULONG TxPinCfg = 0x00050F0A; /*Gary 2007/08/09 0x050A0A */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62,
(0x37 - GET_LNA_GAIN(pAd)));
(0x37 - GET_LNA_GAIN(pAd)));
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64,
(0x37 - GET_LNA_GAIN(pAd)));
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0); //(0x44 - GET_LNA_GAIN(pAd))); // According the Rory's suggestion to solve the middle range issue.
- //RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0); /*(0x44 - GET_LNA_GAIN(pAd))); // According the Rory's suggestion to solve the middle range issue. */
+ /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62); */
- // Rx High power VGA offset for LNA select
+ /* Rx High power VGA offset for LNA select */
if (pAd->NicConfig2.field.ExternalLNAForG) {
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50);
}
- // 5G band selection PIN, bit1 and bit2 are complement
+ /* 5G band selection PIN, bit1 and bit2 are complement */
RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
Value &= (~0x6);
Value |= (0x04);
RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
- // Turn off unused PA or LNA when only 1T or 1R
+ /* Turn off unused PA or LNA when only 1T or 1R */
if (pAd->Antenna.field.TxPath == 1) {
TxPinCfg &= 0xFFFFFFF3;
}
RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
#if defined(RT3090) || defined(RT3390)
- // PCIe PHY Transmit attenuation adjustment
+ /* PCIe PHY Transmit attenuation adjustment */
if (IS_RT3090A(pAd) || IS_RT3390(pAd)) {
TX_ATTENUATION_CTRL_STRUC TxAttenuationCtrl = {
.word = 0};
RTMP_IO_READ32(pAd, PCIE_PHY_TX_ATTENUATION_CTRL,
&TxAttenuationCtrl.word);
- if (Channel == 14) // Channel #14
+ if (Channel == 14) /* Channel #14 */
{
- TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 1; // Enable PCIe PHY Tx attenuation
- TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 4; // 9/16 full drive level
- } else // Channel #1~#13
+ TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 1; /* Enable PCIe PHY Tx attenuation */
+ TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 4; /* 9/16 full drive level */
+ } else /* Channel #1~#13 */
{
- TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 0; // Disable PCIe PHY Tx attenuation
- TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 0; // n/a
+ TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 0; /* Disable PCIe PHY Tx attenuation */
+ TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 0; /* n/a */
}
RTMP_IO_WRITE32(pAd, PCIE_PHY_TX_ATTENUATION_CTRL,
}
#endif
} else {
- ULONG TxPinCfg = 0x00050F05; //Gary 2007/8/9 0x050505
+ ULONG TxPinCfg = 0x00050F05; /*Gary 2007/8/9 0x050505 */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62,
(0x37 - GET_LNA_GAIN(pAd)));
(0x37 - GET_LNA_GAIN(pAd)));
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64,
(0x37 - GET_LNA_GAIN(pAd)));
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0); //(0x44 - GET_LNA_GAIN(pAd))); // According the Rory's suggestion to solve the middle range issue.
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0); /*(0x44 - GET_LNA_GAIN(pAd))); // According the Rory's suggestion to solve the middle range issue. */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
- // Rx High power VGA offset for LNA select
+ /* Rx High power VGA offset for LNA select */
if (pAd->NicConfig2.field.ExternalLNAForA) {
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46);
} else {
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50);
}
- // 5G band selection PIN, bit1 and bit2 are complement
+ /* 5G band selection PIN, bit1 and bit2 are complement */
RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
Value &= (~0x6);
Value |= (0x02);
RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
- // Turn off unused PA or LNA when only 1T or 1R
+ /* Turn off unused PA or LNA when only 1T or 1R */
if (pAd->Antenna.field.TxPath == 1) {
TxPinCfg &= 0xFFFFFFF3;
}
}
- // R66 should be set according to Channel and use 20MHz when scanning
- //RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x2E + GET_LNA_GAIN(pAd)));
+ /* R66 should be set according to Channel and use 20MHz when scanning */
+ /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x2E + GET_LNA_GAIN(pAd))); */
if (bScan)
RTMPSetAGCInitValue(pAd, BW_20);
else
RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
- //
- // On 11A, We should delay and wait RF/BBP to be stable
- // and the appropriate time should be 1000 micro seconds
- // 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
- //
+ /* */
+ /* On 11A, We should delay and wait RF/BBP to be stable */
+ /* and the appropriate time should be 1000 micro seconds */
+ /* 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL. */
+ /* */
RTMPusecDelay(1000);
}
{
BBP_CSR_CFG_STRUC BbpCsr;
DBGPRINT(RT_DEBUG_ERROR, ("Reset BBP Agent busy bit.!! \n"));
- // Still need to find why BBP agent keeps busy, but in fact, hardware still function ok. Now clear busy first.
+ /* Still need to find why BBP agent keeps busy, but in fact, hardware still function ok. Now clear busy first. */
RTMP_IO_READ32(pAd, H2M_BBP_AGENT, &BbpCsr.word);
BbpCsr.field.Busy = 0;
RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, BbpCsr.word);
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) ||
#ifdef RTMP_MAC_PCI
(pAd->bPCIclkOff == TRUE) ||
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF) ||
RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
return;
}
}
- // TX power compensation for temperature variation based on TSSI. try every 4 second
+ /* TX power compensation for temperature variation based on TSSI. try every 4 second */
if (pAd->Mlme.OneSecPeriodicRound % 4 == 0) {
if (pAd->CommonCfg.Channel <= 14) {
/* bg channel */
/* if value is 0xa5, tx power will be -= TxAgcStep*(2-1) */
if (BbpR49 > pTssiMinusBoundary[1]) {
- // Reading is larger than the reference value
- // check for how large we need to decrease the Tx power
+ /* Reading is larger than the reference value */
+ /* check for how large we need to decrease the Tx power */
for (idx = 1; idx < 5; idx++) {
- if (BbpR49 <= pTssiMinusBoundary[idx]) // Found the range
+ if (BbpR49 <= pTssiMinusBoundary[idx]) /* Found the range */
break;
}
- // The index is the step we should decrease, idx = 0 means there is nothing to compensate
-// if (R3 > (ULONG) (TxAgcStep * (idx-1)))
+ /* The index is the step we should decrease, idx = 0 means there is nothing to compensate */
+/* if (R3 > (ULONG) (TxAgcStep * (idx-1))) */
*pTxAgcCompensate = -(TxAgcStep * (idx - 1));
-// else
-// *pTxAgcCompensate = -((UCHAR)R3);
+/* else */
+/* *pTxAgcCompensate = -((UCHAR)R3); */
DeltaPwr += (*pTxAgcCompensate);
DBGPRINT(RT_DEBUG_TRACE,
("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
BbpR49, TssiRef, TxAgcStep, idx - 1));
} else if (BbpR49 < pTssiPlusBoundary[1]) {
- // Reading is smaller than the reference value
- // check for how large we need to increase the Tx power
+ /* Reading is smaller than the reference value */
+ /* check for how large we need to increase the Tx power */
for (idx = 1; idx < 5; idx++) {
- if (BbpR49 >= pTssiPlusBoundary[idx]) // Found the range
+ if (BbpR49 >= pTssiPlusBoundary[idx]) /* Found the range */
break;
}
- // The index is the step we should increase, idx = 0 means there is nothing to compensate
+ /* The index is the step we should increase, idx = 0 means there is nothing to compensate */
*pTxAgcCompensate = TxAgcStep * (idx - 1);
DeltaPwr += (*pTxAgcCompensate);
DBGPRINT(RT_DEBUG_TRACE,
BbpR1 &= 0xFC;
/* calculate delta power based on the percentage specified from UI */
- // E2PROM setting is calibrated for maximum TX power (i.e. 100%)
- // We lower TX power here according to the percentage specified from UI
- if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff) // AUTO TX POWER control
+ /* E2PROM setting is calibrated for maximum TX power (i.e. 100%) */
+ /* We lower TX power here according to the percentage specified from UI */
+ if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff) /* AUTO TX POWER control */
{
{
- // to patch high power issue with some APs, like Belkin N1.
+ /* to patch high power issue with some APs, like Belkin N1. */
if (Rssi > -35) {
- BbpR1 |= 0x02; // DeltaPwr -= 12;
+ BbpR1 |= 0x02; /* DeltaPwr -= 12; */
} else if (Rssi > -40) {
- BbpR1 |= 0x01; // DeltaPwr -= 6;
+ BbpR1 |= 0x01; /* DeltaPwr -= 6; */
} else;
}
- } else if (pAd->CommonCfg.TxPowerPercentage > 90) // 91 ~ 100% & AUTO, treat as 100% in terms of mW
+ } else if (pAd->CommonCfg.TxPowerPercentage > 90) /* 91 ~ 100% & AUTO, treat as 100% in terms of mW */
;
- else if (pAd->CommonCfg.TxPowerPercentage > 60) // 61 ~ 90%, treat as 75% in terms of mW // DeltaPwr -= 1;
+ else if (pAd->CommonCfg.TxPowerPercentage > 60) /* 61 ~ 90%, treat as 75% in terms of mW // DeltaPwr -= 1; */
{
DeltaPwr -= 1;
- } else if (pAd->CommonCfg.TxPowerPercentage > 30) // 31 ~ 60%, treat as 50% in terms of mW // DeltaPwr -= 3;
+ } else if (pAd->CommonCfg.TxPowerPercentage > 30) /* 31 ~ 60%, treat as 50% in terms of mW // DeltaPwr -= 3; */
{
DeltaPwr -= 3;
- } else if (pAd->CommonCfg.TxPowerPercentage > 15) // 16 ~ 30%, treat as 25% in terms of mW // DeltaPwr -= 6;
+ } else if (pAd->CommonCfg.TxPowerPercentage > 15) /* 16 ~ 30%, treat as 25% in terms of mW // DeltaPwr -= 6; */
{
BbpR1 |= 0x01;
- } else if (pAd->CommonCfg.TxPowerPercentage > 9) // 10 ~ 15%, treat as 12.5% in terms of mW // DeltaPwr -= 9;
+ } else if (pAd->CommonCfg.TxPowerPercentage > 9) /* 10 ~ 15%, treat as 12.5% in terms of mW // DeltaPwr -= 9; */
{
BbpR1 |= 0x01;
DeltaPwr -= 3;
- } else // 0 ~ 9 %, treat as MIN(~3%) in terms of mW // DeltaPwr -= 12;
+ } else /* 0 ~ 9 %, treat as MIN(~3%) in terms of mW // DeltaPwr -= 12; */
{
BbpR1 |= 0x02;
}
RTMP_IO_WRITE32(pAd, MAC_BSSID_DW0, Addr4);
Addr4 = 0;
- // always one BSSID in STA mode
+ /* always one BSSID in STA mode */
Addr4 = (ULONG) (pBssid[4]) | (ULONG) (pBssid[5] << 8);
RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, Addr4);
USHORT offset;
pEntry->Sst = SST_ASSOC;
- pEntry->Aid = MCAST_WCID; // Softap supports 1 BSSID and use WCID=0 as multicast Wcid index
+ pEntry->Aid = MCAST_WCID; /* Softap supports 1 BSSID and use WCID=0 as multicast Wcid index */
pEntry->PsMode = PWR_ACTIVE;
pEntry->CurrTxRate = pAd->CommonCfg.MlmeRate;
offset = MAC_WCID_BASE + BSS0Mcast_WCID * HW_WCID_ENTRY_SIZE;
Data |= 0x80;
RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
- //OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
+ /*OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED); */
}
/*
RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
Data &= 0xFFFFFF00;
- //Data |= 0x20;
+ /*Data |= 0x20; */
#ifndef WIFI_TEST
- //if ( pAd->CommonCfg.bEnableTxBurst )
- // Data |= 0x60; // for performance issue not set the TXOP to 0
+ /*if ( pAd->CommonCfg.bEnableTxBurst ) */
+ /* Data |= 0x60; // for performance issue not set the TXOP to 0 */
#endif
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE)
&& (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE)
) {
- // For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
+ /* For CWC test, change txop from 0x30 to 0x20 in TxBurst mode */
if (pAd->CommonCfg.bEnableTxBurst)
Data |= 0x20;
}
DBGPRINT(RT_DEBUG_TRACE, ("--->Disable TSF synchronization\n"));
- // 2003-12-20 disable TSF and TBTT while NIC in power-saving have side effect
- // that NIC will never wakes up because TSF stops and no more
- // TBTT interrupts
+ /* 2003-12-20 disable TSF and TBTT while NIC in power-saving have side effect */
+ /* that NIC will never wakes up because TSF stops and no more */
+ /* TBTT interrupts */
pAd->TbttTickCount = 0;
RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
csr.field.bBeaconGen = 0;
DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableBssSync(INFRA mode)\n"));
RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-// RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, 0x00000000);
+/* RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, 0x00000000); */
{
- csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
+ csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; /* ASIC register in units of 1/16 TU */
csr.field.bTsfTicking = 1;
- csr.field.TsfSyncMode = 1; // sync TSF in INFRASTRUCTURE mode
- csr.field.bBeaconGen = 0; // do NOT generate BEACON
+ csr.field.TsfSyncMode = 1; /* sync TSF in INFRASTRUCTURE mode */
+ csr.field.bBeaconGen = 0; /* do NOT generate BEACON */
csr.field.bTBTTEnable = 1;
}
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
#ifdef RTMP_MAC_PCI
- // move BEACON TXD and frame content to on-chip memory
+ /* move BEACON TXD and frame content to on-chip memory */
ptr = (PUCHAR) & pAd->BeaconTxWI;
- for (i = 0; i < TXWI_SIZE; i += 4) // 16-byte TXWI field
+ for (i = 0; i < TXWI_SIZE; i += 4) /* 16-byte TXWI field */
{
UINT32 longptr =
*ptr + (*(ptr + 1) << 8) + (*(ptr + 2) << 16) +
ptr += 4;
}
- // start right after the 16-byte TXWI field
+ /* start right after the 16-byte TXWI field */
ptr = pAd->BeaconBuf;
for (i = 0; i < pAd->BeaconTxWI.MPDUtotalByteCount; i += 4) {
UINT32 longptr =
RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr);
ptr += 4;
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
- // move BEACON TXD and frame content to on-chip memory
+ /* move BEACON TXD and frame content to on-chip memory */
ptr = (PUCHAR) & pAd->BeaconTxWI;
- for (i = 0; i < TXWI_SIZE; i += 2) // 16-byte TXWI field
+ for (i = 0; i < TXWI_SIZE; i += 2) /* 16-byte TXWI field */
{
- //UINT32 longptr = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
- //RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + i, longptr);
+ /*UINT32 longptr = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24); */
+ /*RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + i, longptr); */
RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + i, ptr, 2);
ptr += 2;
}
- // start right after the 16-byte TXWI field
+ /* start right after the 16-byte TXWI field */
ptr = pAd->BeaconBuf;
for (i = 0; i < pAd->BeaconTxWI.MPDUtotalByteCount; i += 2) {
- //UINT32 longptr = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
- //RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr);
+ /*UINT32 longptr = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24); */
+ /*RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr); */
RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, ptr, 2);
ptr += 2;
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- //
- // For Wi-Fi faily generated beacons between participating stations.
- // Set TBTT phase adaptive adjustment step to 8us (default 16us)
- // don't change settings 2006-5- by Jerry
- //RTMP_IO_WRITE32(pAd, TBTT_SYNC_CFG, 0x00001010);
+ /* */
+ /* For Wi-Fi faily generated beacons between participating stations. */
+ /* Set TBTT phase adaptive adjustment step to 8us (default 16us) */
+ /* don't change settings 2006-5- by Jerry */
+ /*RTMP_IO_WRITE32(pAd, TBTT_SYNC_CFG, 0x00001010); */
- // start sending BEACON
- csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
+ /* start sending BEACON */
+ csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; /* ASIC register in units of 1/16 TU */
csr9.field.bTsfTicking = 1;
- csr9.field.TsfSyncMode = 2; // sync TSF in IBSS mode
+ csr9.field.TsfSyncMode = 2; /* sync TSF in IBSS mode */
csr9.field.bTBTTEnable = 1;
csr9.field.bBeaconGen = 1;
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
fCLIENT_STATUS_WMM_CAPABLE);
}
- //========================================================
- // MAC Register has a copy .
- //========================================================
-//#ifndef WIFI_TEST
+ /*======================================================== */
+ /* MAC Register has a copy . */
+ /*======================================================== */
+/*#ifndef WIFI_TEST */
if (pAd->CommonCfg.bEnableTxBurst) {
- // For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
- Ac0Cfg.field.AcTxop = 0x20; // Suggest by John for TxBurst in HT Mode
+ /* For CWC test, change txop from 0x30 to 0x20 in TxBurst mode */
+ Ac0Cfg.field.AcTxop = 0x20; /* Suggest by John for TxBurst in HT Mode */
} else
- Ac0Cfg.field.AcTxop = 0; // QID_AC_BE
-//#else
-// Ac0Cfg.field.AcTxop = 0; // QID_AC_BE
-//#endif
+ Ac0Cfg.field.AcTxop = 0; /* QID_AC_BE */
+/*#else */
+/* Ac0Cfg.field.AcTxop = 0; // QID_AC_BE */
+/*#endif */
Ac0Cfg.field.Cwmin = CW_MIN_IN_BITS;
Ac0Cfg.field.Cwmax = CW_MAX_IN_BITS;
Ac0Cfg.field.Aifsn = 2;
RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word);
- Ac1Cfg.field.AcTxop = 0; // QID_AC_BK
+ Ac1Cfg.field.AcTxop = 0; /* QID_AC_BK */
Ac1Cfg.field.Cwmin = CW_MIN_IN_BITS;
Ac1Cfg.field.Cwmax = CW_MAX_IN_BITS;
Ac1Cfg.field.Aifsn = 2;
RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word);
if (pAd->CommonCfg.PhyMode == PHY_11B) {
- Ac2Cfg.field.AcTxop = 192; // AC_VI: 192*32us ~= 6ms
- Ac3Cfg.field.AcTxop = 96; // AC_VO: 96*32us ~= 3ms
+ Ac2Cfg.field.AcTxop = 192; /* AC_VI: 192*32us ~= 6ms */
+ Ac3Cfg.field.AcTxop = 96; /* AC_VO: 96*32us ~= 3ms */
} else {
- Ac2Cfg.field.AcTxop = 96; // AC_VI: 96*32us ~= 3ms
- Ac3Cfg.field.AcTxop = 48; // AC_VO: 48*32us ~= 1.5ms
+ Ac2Cfg.field.AcTxop = 96; /* AC_VI: 96*32us ~= 3ms */
+ Ac3Cfg.field.AcTxop = 48; /* AC_VO: 48*32us ~= 1.5ms */
}
Ac2Cfg.field.Cwmin = CW_MIN_IN_BITS;
Ac2Cfg.field.Cwmax = CW_MAX_IN_BITS;
Ac3Cfg.field.Aifsn = 2;
RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word);
- //========================================================
- // DMA Register has a copy too.
- //========================================================
- csr0.field.Ac0Txop = 0; // QID_AC_BE
- csr0.field.Ac1Txop = 0; // QID_AC_BK
+ /*======================================================== */
+ /* DMA Register has a copy too. */
+ /*======================================================== */
+ csr0.field.Ac0Txop = 0; /* QID_AC_BE */
+ csr0.field.Ac1Txop = 0; /* QID_AC_BK */
RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
if (pAd->CommonCfg.PhyMode == PHY_11B) {
- csr1.field.Ac2Txop = 192; // AC_VI: 192*32us ~= 6ms
- csr1.field.Ac3Txop = 96; // AC_VO: 96*32us ~= 3ms
+ csr1.field.Ac2Txop = 192; /* AC_VI: 192*32us ~= 6ms */
+ csr1.field.Ac3Txop = 96; /* AC_VO: 96*32us ~= 3ms */
} else {
- csr1.field.Ac2Txop = 96; // AC_VI: 96*32us ~= 3ms
- csr1.field.Ac3Txop = 48; // AC_VO: 48*32us ~= 1.5ms
+ csr1.field.Ac2Txop = 96; /* AC_VI: 96*32us ~= 3ms */
+ csr1.field.Ac3Txop = 48; /* AC_VO: 48*32us ~= 1.5ms */
}
RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr1.word);
NdisZeroMemory(&pAd->CommonCfg.APEdcaParm, sizeof(EDCA_PARM));
} else {
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WMM_INUSED);
- //========================================================
- // MAC Register has a copy.
- //========================================================
- //
- // Modify Cwmin/Cwmax/Txop on queue[QID_AC_VI], Recommend by Jerry 2005/07/27
- // To degrade our VIDO Queue's throughput for WiFi WMM S3T07 Issue.
- //
- //pEdcaParm->Txop[QID_AC_VI] = pEdcaParm->Txop[QID_AC_VI] * 7 / 10; // rt2860c need this
+ /*======================================================== */
+ /* MAC Register has a copy. */
+ /*======================================================== */
+ /* */
+ /* Modify Cwmin/Cwmax/Txop on queue[QID_AC_VI], Recommend by Jerry 2005/07/27 */
+ /* To degrade our VIDO Queue's throughput for WiFi WMM S3T07 Issue. */
+ /* */
+ /*pEdcaParm->Txop[QID_AC_VI] = pEdcaParm->Txop[QID_AC_VI] * 7 / 10; // rt2860c need this */
Ac0Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BE];
Ac0Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_BE];
Ac0Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BE];
- Ac0Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BE]; //+1;
+ Ac0Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BE]; /*+1; */
Ac1Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BK];
- Ac1Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_BK]; //+2;
+ Ac1Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_BK]; /*+2; */
Ac1Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BK];
- Ac1Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BK]; //+1;
+ Ac1Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BK]; /*+1; */
Ac2Cfg.field.AcTxop = (pEdcaParm->Txop[QID_AC_VI] * 6) / 10;
if (pAd->Antenna.field.TxPath == 1) {
Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI] + 1;
#ifdef RTMP_MAC_USB
Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI] + 3;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
{
- // Tuning for Wi-Fi WMM S06
+ /* Tuning for Wi-Fi WMM S06 */
if (pAd->CommonCfg.bWiFiTest &&
pEdcaParm->Aifsn[QID_AC_VI] == 10)
Ac2Cfg.field.Aifsn -= 1;
- // Tuning for TGn Wi-Fi 5.2.32
- // STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
+ /* Tuning for TGn Wi-Fi 5.2.32 */
+ /* STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta */
if (STA_TGN_WIFI_ON(pAd) &&
pEdcaParm->Aifsn[QID_AC_VI] == 10) {
Ac0Cfg.field.Aifsn = 3;
#ifdef RT30xx
if (pAd->RfIcType == RFIC_3020
|| pAd->RfIcType == RFIC_2020) {
- // Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta.
+ /* Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta. */
Ac2Cfg.field.Aifsn = 5;
}
-#endif // RT30xx //
+#endif /* RT30xx // */
}
Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
Ac3Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VO];
Ac3Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VO];
-//#ifdef WIFI_TEST
+/*#ifdef WIFI_TEST */
if (pAd->CommonCfg.bWiFiTest) {
if (Ac3Cfg.field.AcTxop == 102) {
Ac0Cfg.field.AcTxop =
pEdcaParm->Txop[QID_AC_VI];
} /* End of if */
}
-//#endif // WIFI_TEST //
+/*#endif // WIFI_TEST // */
RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word);
RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word);
RTMP_IO_WRITE32(pAd, EDCA_AC2_CFG, Ac2Cfg.word);
RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word);
- //========================================================
- // DMA Register has a copy too.
- //========================================================
+ /*======================================================== */
+ /* DMA Register has a copy too. */
+ /*======================================================== */
csr0.field.Ac0Txop = Ac0Cfg.field.AcTxop;
csr0.field.Ac1Txop = Ac1Cfg.field.AcTxop;
RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE];
CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK];
CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI];
- CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
+ CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; /*for TGn wifi test */
RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
CwmaxCsr.word = 0;
RTMP_IO_WRITE32(pAd, WMM_CWMAX_CFG, CwmaxCsr.word);
AifsnCsr.word = 0;
- AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BE];
- AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK];
- AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI];
+ AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn; /*pEdcaParm->Aifsn[QID_AC_BE]; */
+ AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; /*pEdcaParm->Aifsn[QID_AC_BK]; */
+ AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; /*pEdcaParm->Aifsn[QID_AC_VI]; */
{
- // Tuning for Wi-Fi WMM S06
+ /* Tuning for Wi-Fi WMM S06 */
if (pAd->CommonCfg.bWiFiTest &&
pEdcaParm->Aifsn[QID_AC_VI] == 10)
AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn - 4;
- // Tuning for TGn Wi-Fi 5.2.32
- // STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta
+ /* Tuning for TGn Wi-Fi 5.2.32 */
+ /* STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta */
if (STA_TGN_WIFI_ON(pAd) &&
pEdcaParm->Aifsn[QID_AC_VI] == 10) {
AifsnCsr.field.Aifsn0 = 3;
}
{
- AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
+ AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; /*pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test */
#ifdef RT30xx
- // TODO: Shiang, this modification also suitable for RT3052/RT3050 ???
+ /* TODO: Shiang, this modification also suitable for RT3052/RT3050 ??? */
if (pAd->RfIcType == RFIC_3020
|| pAd->RfIcType == RFIC_2020) {
- AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04.
+ AifsnCsr.field.Aifsn2 = 0x2; /*pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04. */
}
-#endif // RT30xx //
+#endif /* RT30xx // */
}
RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
SlotTime = (bUseShortSlotTime) ? 9 : 20;
{
- // force using short SLOT time for FAE to demo performance when TxBurst is ON
+ /* force using short SLOT time for FAE to demo performance when TxBurst is ON */
if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
&& (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)
&& (pAd->CommonCfg.BACapability.field.Policy ==
BA_NOTUSE))
) {
- // In this case, we will think it is doing Wi-Fi test
- // And we will not set to short slot when bEnableTxBurst is TRUE.
+ /* In this case, we will think it is doing Wi-Fi test */
+ /* And we will not set to short slot when bEnableTxBurst is TRUE. */
} else if (pAd->CommonCfg.bEnableTxBurst) {
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
SlotTime = 9;
}
}
- //
- // For some reasons, always set it to short slot time.
- //
- // ToDo: Should consider capability with 11B
- //
+ /* */
+ /* For some reasons, always set it to short slot time. */
+ /* */
+ /* ToDo: Should consider capability with 11B */
+ /* */
{
if (pAd->StaCfg.BssType == BSS_ADHOC) {
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
IN UCHAR CipherAlg,
IN PUCHAR pKey, IN PUCHAR pTxMic, IN PUCHAR pRxMic)
{
- ULONG offset; //, csr0;
+ ULONG offset; /*, csr0; */
SHAREDKEY_MODE_STRUC csr1;
#ifdef RTMP_MAC_PCI
INT i;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
DBGPRINT(RT_DEBUG_TRACE,
("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,
KeyIdx));
-//============================================================================================
+/*============================================================================================ */
DBGPRINT(RT_DEBUG_TRACE,
("AsicAddSharedKeyEntry: %s key #%d\n", CipherName[CipherAlg],
pTxMic[0], pTxMic[1], pTxMic[2], pTxMic[3],
pTxMic[4], pTxMic[5], pTxMic[6], pTxMic[7]));
}
-//============================================================================================
- //
- // fill key material - key + TX MIC + RX MIC
- //
+/*============================================================================================ */
+ /* */
+ /* fill key material - key + TX MIC + RX MIC */
+ /* */
#ifdef RTMP_MAC_PCI
offset =
SHARED_KEY_TABLE_BASE + (4 * BssIndex + KeyIdx) * HW_KEY_ENTRY_SIZE;
RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
}
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
{
offset =
RTUSBMultiWrite(pAd, offset, pRxMic, 8);
}
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- //
- // Update cipher algorithm. WSTA always use BSS0
- //
+ /* */
+ /* Update cipher algorithm. WSTA always use BSS0 */
+ /* */
RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2),
&csr1.word);
DBGPRINT(RT_DEBUG_TRACE,
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID AsicRemoveSharedKeyEntry(IN PRTMP_ADAPTER pAd,
IN UCHAR BssIndex, IN UCHAR KeyIdx)
{
- //ULONG SecCsr0;
+ /*ULONG SecCsr0; */
SHAREDKEY_MODE_STRUC csr1;
DBGPRINT(RT_DEBUG_TRACE,
{
ULONG WCIDAttri = 0, offset;
- //
- // Update WCID attribute.
- // Only TxKey could update WCID attribute.
- //
+ /* */
+ /* Update WCID attribute. */
+ /* Only TxKey could update WCID attribute. */
+ /* */
offset = MAC_WCID_ATTRIBUTE_BASE + (WCID * HW_WCID_ATTRI_SIZE);
WCIDAttri =
(BssIndex << 4) | (CipherAlg << 1) | (bUsePairewiseKeyTable);
IN BOOLEAN bUsePairewiseKeyTable, IN BOOLEAN bTxKey)
{
ULONG offset;
-// ULONG WCIDAttri = 0;
+/* ULONG WCIDAttri = 0; */
UCHAR IV4 = 0;
PUCHAR pKey = pCipherKey->Key;
-// ULONG KeyLen = pCipherKey->KeyLen;
+/* ULONG KeyLen = pCipherKey->KeyLen; */
PUCHAR pTxMic = pCipherKey->TxMic;
PUCHAR pRxMic = pCipherKey->RxMic;
PUCHAR pTxtsc = pCipherKey->TxTsc;
SHAREDKEY_MODE_STRUC csr1;
#ifdef RTMP_MAC_PCI
UCHAR i;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
-// ASSERT(KeyLen <= MAX_LEN_OF_PEER_KEY);
+/* ASSERT(KeyLen <= MAX_LEN_OF_PEER_KEY); */
DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n"));
- //
- // 1.) decide key table offset
- //
+ /* */
+ /* 1.) decide key table offset */
+ /* */
if (bUsePairewiseKeyTable)
offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
else
SHARED_KEY_TABLE_BASE + (4 * BssIndex +
KeyIdx) * HW_KEY_ENTRY_SIZE;
- //
- // 2.) Set Key to Asic
- //
- //for (i = 0; i < KeyLen; i++)
+ /* */
+ /* 2.) Set Key to Asic */
+ /* */
+ /*for (i = 0; i < KeyLen; i++) */
#ifdef RTMP_MAC_PCI
for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++) {
RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
}
offset += MAX_LEN_OF_PEER_KEY;
- //
- // 3.) Set MIC key if available
- //
+ /* */
+ /* 3.) Set MIC key if available */
+ /* */
if (pTxMic) {
for (i = 0; i < 8; i++) {
RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]);
RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
}
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_PEER_KEY);
offset += MAX_LEN_OF_PEER_KEY;
- //
- // 3.) Set MIC key if available
- //
+ /* */
+ /* 3.) Set MIC key if available */
+ /* */
if (pTxMic) {
RTUSBMultiWrite(pAd, offset, pTxMic, 8);
}
if (pRxMic) {
RTUSBMultiWrite(pAd, offset, pRxMic, 8);
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- //
- // 4.) Modify IV/EIV if needs
- // This will force Asic to use this key ID by setting IV.
- //
+ /* */
+ /* 4.) Modify IV/EIV if needs */
+ /* This will force Asic to use this key ID by setting IV. */
+ /* */
if (bTxKey) {
#ifdef RTMP_MAC_PCI
offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE);
- //
- // Write IV
- //
+ /* */
+ /* Write IV */
+ /* */
RTMP_IO_WRITE8(pAd, offset, pTxtsc[1]);
RTMP_IO_WRITE8(pAd, offset + 1, ((pTxtsc[1] | 0x20) & 0x7f));
RTMP_IO_WRITE8(pAd, offset + 2, pTxtsc[0]);
if ((CipherAlg == CIPHER_TKIP)
|| (CipherAlg == CIPHER_TKIP_NO_MIC)
|| (CipherAlg == CIPHER_AES))
- IV4 |= 0x20; // turn on extension bit means EIV existence
+ IV4 |= 0x20; /* turn on extension bit means EIV existence */
RTMP_IO_WRITE8(pAd, offset + 3, IV4);
- //
- // Write EIV
- //
+ /* */
+ /* Write EIV */
+ /* */
offset += 4;
for (i = 0; i < 4; i++) {
RTMP_IO_WRITE8(pAd, offset + i, pTxtsc[i + 2]);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
UINT32 tmpVal;
- //
- // Write IV
- //
+ /* */
+ /* Write IV */
+ /* */
IV4 = (KeyIdx << 6);
if ((CipherAlg == CIPHER_TKIP)
|| (CipherAlg == CIPHER_TKIP_NO_MIC)
|| (CipherAlg == CIPHER_AES))
- IV4 |= 0x20; // turn on extension bit means EIV existence
+ IV4 |= 0x20; /* turn on extension bit means EIV existence */
tmpVal =
pTxtsc[1] + (((pTxtsc[1] | 0x20) & 0x7f) << 8) +
(pTxtsc[0] << 16) + (IV4 << 24);
RTMP_IO_WRITE32(pAd, offset, tmpVal);
- //
- // Write EIV
- //
+ /* */
+ /* Write EIV */
+ /* */
offset += 4;
RTMP_IO_WRITE32(pAd, offset, *(PUINT32) & pCipherKey->TxTsc[2]);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg,
bUsePairewiseKeyTable);
}
if (!bUsePairewiseKeyTable) {
- //
- // Only update the shared key security mode
- //
+ /* */
+ /* Only update the shared key security mode */
+ /* */
RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2),
&csr1.word);
if ((BssIndex % 2) == 0) {
PUCHAR pRxMic = pCipherKey->RxMic;
#ifdef DBG
UCHAR CipherAlg = pCipherKey->CipherAlg;
-#endif // DBG //
+#endif /* DBG // */
- // EKEY
+ /* EKEY */
offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
#ifdef RTMP_MAC_PCI
for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++) {
RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
RTUSBMultiWrite(pAd, offset, &pCipherKey->Key[0], MAX_LEN_OF_PEER_KEY);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
for (i = 0; i < MAX_LEN_OF_PEER_KEY; i += 4) {
UINT32 Value;
RTMP_IO_READ32(pAd, offset + i, &Value);
offset += MAX_LEN_OF_PEER_KEY;
- // MIC KEY
+ /* MIC KEY */
if (pTxMic) {
#ifdef RTMP_MAC_PCI
for (i = 0; i < 8; i++) {
RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
RTUSBMultiWrite(pAd, offset, &pCipherKey->TxMic[0], 8);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
}
offset += 8;
if (pRxMic) {
for (i = 0; i < 8; i++) {
RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
RTUSBMultiWrite(pAd, offset, &pCipherKey->RxMic[0], 8);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
}
DBGPRINT(RT_DEBUG_TRACE,
ULONG WCIDAttri;
USHORT offset;
- // re-set the entry's WCID attribute as OPEN-NONE.
+ /* re-set the entry's WCID attribute as OPEN-NONE. */
offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
WCIDAttri = (BssIdx << 4) | PAIRWISEKEYTABLE;
RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
#ifdef RT30xx
/* RT3572 ATE need not to do this. */
RT30xxSetRxAnt(pAd, Ant);
-#endif // RT30xx //
+#endif /* RT30xx // */
}
VOID AsicTurnOffRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel)
if (pAd->chipOps.AsicRfTurnOff) {
pAd->chipOps.AsicRfTurnOff(pAd);
} else {
- // RF R2 bit 18 = 0
+ /* RF R2 bit 18 = 0 */
UINT32 R1 = 0, R2 = 0, R3 = 0;
UCHAR index;
RTMP_RF_REGS *RFRegTable;
RTMP_RF_IO_WRITE32(pAd, R1);
RTMP_RF_IO_WRITE32(pAd, R2);
- // Program R1b13 to 1, R3/b18,19 to 0, R2b18 to 0.
- // Set RF R2 bit18=0, R3 bit[18:19]=0
- //if (pAd->StaCfg.bRadio == FALSE)
+ /* Program R1b13 to 1, R3/b18,19 to 0, R2b18 to 0. */
+ /* Set RF R2 bit18=0, R3 bit[18:19]=0 */
+ /*if (pAd->StaCfg.bRadio == FALSE) */
if (1) {
RTMP_RF_IO_WRITE32(pAd, R3);
VOID AsicTurnOnRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel)
{
- // RF R2 bit 18 = 0
+ /* RF R2 bit 18 = 0 */
UINT32 R1 = 0, R2 = 0, R3 = 0;
UCHAR index;
RTMP_RF_REGS *RFRegTable;
#ifdef PCIE_PS_SUPPORT
- // The RF programming sequence is difference between 3xxx and 2xxx
+ /* The RF programming sequence is difference between 3xxx and 2xxx */
if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))) {
return;
}
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
RFRegTable = RF2850RegTable;
R2 = RFRegTable[index].R2;
if (pAd->Antenna.field.TxPath == 1) {
- R2 |= 0x4000; // If TXpath is 1, bit 14 = 1;
+ R2 |= 0x4000; /* If TXpath is 1, bit 14 = 1; */
}
if (pAd->Antenna.field.RxPath == 2) {
- R2 |= 0x40; // write 1 to off Rxpath.
+ R2 |= 0x40; /* write 1 to off Rxpath. */
} else if (pAd->Antenna.field.RxPath == 1) {
- R2 |= 0x20040; // write 1 to off RxPath
+ R2 |= 0x20040; /* write 1 to off RxPath */
}
RTMP_RF_IO_WRITE32(pAd, R2);
regionMax = REGION_MAXIMUM_A_BAND;
}
- // TODO: Is it neccesay for following check???
- // Country can be set only when EEPROM not programmed
+ /* TODO: Is it neccesay for following check??? */
+ /* Country can be set only when EEPROM not programmed */
if (*pCountryRegion & 0x80) {
DBGPRINT(RT_DEBUG_ERROR,
("CfgSetCountryRegion():CountryRegion in eeprom was programmed\n"));
else if (ShortSlot == 0)
pAd->CommonCfg.bUseShortSlotTime = FALSE;
else
- return FALSE; //Invalid argument
+ return FALSE; /*Invalid argument */
return TRUE;
}
UCHAR CipherAlg = CIPHER_NONE;
BOOLEAN bKeyIsHex = FALSE;
- // TODO: Shall we do memset for the original key info??
+ /* TODO: Shall we do memset for the original key info?? */
memset(pSharedKey, 0, sizeof(CIPHER_KEY));
KeyLen = strlen(keyString);
switch (KeyLen) {
- case 5: //wep 40 Ascii type
- case 13: //wep 104 Ascii type
+ case 5: /*wep 40 Ascii type */
+ case 13: /*wep 104 Ascii type */
bKeyIsHex = FALSE;
pSharedKey->KeyLen = KeyLen;
NdisMoveMemory(pSharedKey->Key, keyString, KeyLen);
break;
- case 10: //wep 40 Hex type
- case 26: //wep 104 Hex type
+ case 10: /*wep 40 Hex type */
+ case 26: /*wep 104 Hex type */
for (i = 0; i < KeyLen; i++) {
if (!isxdigit(*(keyString + i)))
- return FALSE; //Not Hex value;
+ return FALSE; /*Not Hex value; */
}
bKeyIsHex = TRUE;
pSharedKey->KeyLen = KeyLen / 2;
AtoH(keyString, pSharedKey->Key, pSharedKey->KeyLen);
break;
- default: //Invalid argument
+ default: /*Invalid argument */
DBGPRINT(RT_DEBUG_TRACE,
("RT_CfgSetWepKey(keyIdx=%d):Invalid argument (arg=%s)\n",
keyIdx, keyString));
UCHAR SNAP_802_1H[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
UCHAR SNAP_BRIDGE_TUNNEL[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
-// Add Cisco Aironet SNAP heade for CCX2 support
+/* Add Cisco Aironet SNAP heade for CCX2 support */
UCHAR SNAP_AIRONET[] = { 0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x00 };
UCHAR CKIP_LLC_SNAP[] = { 0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x02 };
UCHAR EAPOL_LLC_SNAP[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00, 0x88, 0x8e };
UCHAR APPLE_TALK[] = { 0x80, 0xf3 };
UCHAR RateIdToPlcpSignal[12] = {
- 0, /* RATE_1 */ 1, /* RATE_2 */ 2, /* RATE_5_5 */ 3, /* RATE_11 */// see BBP spec
- 11, /* RATE_6 */ 15, /* RATE_9 */ 10, /* RATE_12 */ 14, /* RATE_18 */// see IEEE802.11a-1999 p.14
+ 0, /* RATE_1 */ 1, /* RATE_2 */ 2, /* RATE_5_5 */ 3, /* RATE_11 *//* see BBP spec */
+ 11, /* RATE_6 */ 15, /* RATE_9 */ 10, /* RATE_12 */ 14, /* RATE_18 *//* see IEEE802.11a-1999 p.14 */
9, /* RATE_24 */ 13, /* RATE_36 */ 8, /* RATE_48 */ 12 /* RATE_54 */
-}; // see IEEE802.11a-1999 p.14
+}; /* see IEEE802.11a-1999 p.14 */
UCHAR OfdmSignalToRateId[16] = {
- RATE_54, RATE_54, RATE_54, RATE_54, // OFDM PLCP Signal = 0, 1, 2, 3 respectively
- RATE_54, RATE_54, RATE_54, RATE_54, // OFDM PLCP Signal = 4, 5, 6, 7 respectively
- RATE_48, RATE_24, RATE_12, RATE_6, // OFDM PLCP Signal = 8, 9, 10, 11 respectively
- RATE_54, RATE_36, RATE_18, RATE_9, // OFDM PLCP Signal = 12, 13, 14, 15 respectively
+ RATE_54, RATE_54, RATE_54, RATE_54, /* OFDM PLCP Signal = 0, 1, 2, 3 respectively */
+ RATE_54, RATE_54, RATE_54, RATE_54, /* OFDM PLCP Signal = 4, 5, 6, 7 respectively */
+ RATE_48, RATE_24, RATE_12, RATE_6, /* OFDM PLCP Signal = 8, 9, 10, 11 respectively */
+ RATE_54, RATE_36, RATE_18, RATE_9, /* OFDM PLCP Signal = 12, 13, 14, 15 respectively */
};
UCHAR OfdmRateToRxwiMCS[12] = {
0, 0, 0, 0,
- 0, 1, 2, 3, // OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
- 4, 5, 6, 7, // OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
+ 0, 1, 2, 3, /* OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3 */
+ 4, 5, 6, 7, /* OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7 */
};
UCHAR RxwiMCSToOfdmRate[12] = {
RATE_6, RATE_9, RATE_12, RATE_18,
- RATE_24, RATE_36, RATE_48, RATE_54, // OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
- 4, 5, 6, 7, // OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
+ RATE_24, RATE_36, RATE_48, RATE_54, /* OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3 */
+ 4, 5, 6, 7, /* OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7 */
};
char *MCSToMbps[] =
UCHAR default_cwmin[] =
{ CW_MIN_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS - 1, CW_MIN_IN_BITS - 2 };
-//UCHAR default_cwmax[]={CW_MAX_IN_BITS, CW_MAX_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1};
+/*UCHAR default_cwmax[]={CW_MAX_IN_BITS, CW_MAX_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1}; */
UCHAR default_sta_aifsn[] = { 3, 7, 2, 2 };
UCHAR MapUserPriorityToAccessCategory[8] =
PNDIS_PACKET pPacket;
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
ULONG FreeNum;
- UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
+ UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; /*RTMP_HW_HDR_LEN]; */
#ifdef RTMP_MAC_PCI
unsigned long IrqFlags = 0;
UCHAR IrqState;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
BOOLEAN bUseDataQ = FALSE;
int retryCnt = 0;
QueIdx &= (~MGMT_USE_QUEUE_FLAG);
}
#ifdef RTMP_MAC_PCI
- // 2860C use Tx Ring
+ /* 2860C use Tx Ring */
IrqState = pAd->irq_disabled;
if (pAd->MACVersion == 0x28600100) {
QueIdx = (bUseDataQ == TRUE ? QueIdx : 3);
}
if (bUseDataQ && (!IrqState))
RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
do {
- // Reset is in progress, stop immediately
+ /* Reset is in progress, stop immediately */
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
RTMP_TEST_FLAG(pAd,
fRTMP_ADAPTER_HALT_IN_PROGRESS |
Status = NDIS_STATUS_FAILURE;
break;
}
- // Check Free priority queue
- // Since we use PBF Queue2 for management frame. Its corresponding DMA ring should be using TxRing.
+ /* Check Free priority queue */
+ /* Since we use PBF Queue2 for management frame. Its corresponding DMA ring should be using TxRing. */
#ifdef RTMP_MAC_PCI
if (bUseDataQ) {
retryCnt = MAX_DATAMM_RETRY;
- // free Tx(QueIdx) resources
+ /* free Tx(QueIdx) resources */
RTMPFreeTXDUponTxDmaDone(pAd, QueIdx);
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
} else
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
{
FreeNum = GET_MGMTRING_FREENO(pAd);
}
if ((FreeNum > 0)) {
- // We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
+ /* We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870 */
NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
Status =
RTMPAllocateNdisPacket(pAd, &pPacket,
("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
break;
}
- //pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
- //pAd->CommonCfg.MlmeRate = RATE_2;
+ /*pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK; */
+ /*pAd->CommonCfg.MlmeRate = RATE_2; */
#ifdef RTMP_MAC_PCI
if (bUseDataQ) {
MlmeDataHardTransmit(pAd, QueIdx, pPacket);
retryCnt--;
} else
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
Status = MlmeHardTransmit(pAd, QueIdx, pPacket);
if (Status == NDIS_STATUS_SUCCESS)
retryCnt = 0;
MgmtRingFullCount));
}
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
DBGPRINT(RT_DEBUG_ERROR,
("Qidx(%d), not enough space in MgmtRing, MgmtRingFullCount=%ld!\n",
QueIdx,
#ifdef RTMP_MAC_PCI
if (bUseDataQ && (!IrqState))
RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
return Status;
}
if (pAd->MACVersion == 0x28600100)
return MlmeHardTransmitTxRing(pAd, QueIdx, pPacket);
else
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
return MlmeHardTransmitMgmtRing(pAd, QueIdx, pPacket);
}
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
- // Make sure MGMT ring resource won't be used by other threads
+ /* Make sure MGMT ring resource won't be used by other threads */
RTMP_SEM_LOCK(&pAd->MgmtRingLock);
if (pSrcBufVA == NULL) {
- // The buffer shouldn't be NULL
+ /* The buffer shouldn't be NULL */
RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
return NDIS_STATUS_FAILURE;
}
{
- // outgoing frame always wakeup PHY to prevent frame lost
+ /* outgoing frame always wakeup PHY to prevent frame lost */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, TRUE);
}
pFirstTxWI = (PTXWI_STRUC) (pSrcBufVA + TXINFO_SIZE);
- pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
+ pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); /*TXWI_SIZE); */
if (pHeader_802_11->Addr1[0] & 0x01) {
MlmeRate = pAd->CommonCfg.BasicMlmeRate;
MlmeRate = pAd->CommonCfg.MlmeRate;
}
- // Verify Mlme rate for a / g bands.
- if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) // 11A band
+ /* Verify Mlme rate for a / g bands. */
+ if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) /* 11A band */
MlmeRate = RATE_6;
if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
}
{
- // Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
+ /* Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode. */
if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED
|| pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) {
if (pAd->LatchRfRegs.Channel > 14)
}
}
- //
- // Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
- // Snice it's been set to 0 while on MgtMacHeaderInit
- // By the way this will cause frame to be send on PWR_SAVE failed.
- //
- pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE; // (pAd->StaCfg.Psm == PWR_SAVE);
-
- //
- // In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
- // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
-// if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
+ /* */
+ /* Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE) */
+ /* Snice it's been set to 0 while on MgtMacHeaderInit */
+ /* By the way this will cause frame to be send on PWR_SAVE failed. */
+ /* */
+ pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE; /* (pAd->StaCfg.Psm == PWR_SAVE); */
+
+ /* */
+ /* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
+ /* Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
+/* if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL)) */
{
if ((pHeader_802_11->FC.SubType == SUBTYPE_ACTION) ||
((pHeader_802_11->FC.Type == BTYPE_DATA) &&
}
bInsertTimestamp = FALSE;
- if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
+ if (pHeader_802_11->FC.Type == BTYPE_CNTL) /* must be PS-POLL */
{
- //Set PM bit in ps-poll, to fix WLK 1.2 PowerSaveMode_ext failure issue.
+ /*Set PM bit in ps-poll, to fix WLK 1.2 PowerSaveMode_ext failure issue. */
if ((pAd->OpMode == OPMODE_STA)
&& (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL)) {
pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
}
bAckRequired = FALSE;
- } else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
+ } else /* BTYPE_MGMT or BTYPE_DATA(must be NULL frame) */
{
- //pAd->Sequence++;
- //pHeader_802_11->Sequence = pAd->Sequence;
+ /*pAd->Sequence++; */
+ /*pHeader_802_11->Sequence = pAd->Sequence; */
- if (pHeader_802_11->Addr1[0] & 0x01) // MULTICAST, BROADCAST
+ if (pHeader_802_11->Addr1[0] & 0x01) /* MULTICAST, BROADCAST */
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
&& (pHeader_802_11->FC.Type == BTYPE_MGMT)) {
bInsertTimestamp = TRUE;
- bAckRequired = FALSE; // Disable ACK to prevent retry 0x1f for Probe Response
+ bAckRequired = FALSE; /* Disable ACK to prevent retry 0x1f for Probe Response */
} else
if ((pHeader_802_11->FC.SubType ==
SUBTYPE_PROBE_REQ)
&& (pHeader_802_11->FC.Type == BTYPE_MGMT)) {
- bAckRequired = FALSE; // Disable ACK to prevent retry 0x1f for Probe Request
+ bAckRequired = FALSE; /* Disable ACK to prevent retry 0x1f for Probe Request */
}
}
}
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
- // Before radar detection done, mgmt frame can not be sent but probe req
- // Because we need to use probe req to trigger driver to send probe req in passive scan
+ /* Before radar detection done, mgmt frame can not be sent but probe req */
+ /* Because we need to use probe req to trigger driver to send probe req in passive scan */
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)) {
DBGPRINT(RT_DEBUG_ERROR,
("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
-// if (!IrqState)
+/* if (!IrqState) */
RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
return (NDIS_STATUS_FAILURE);
}
- //
- // fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
- // should always has only one physical buffer, and the whole frame size equals
- // to the first scatter buffer size
- //
+ /* */
+ /* fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET */
+ /* should always has only one physical buffer, and the whole frame size equals */
+ /* to the first scatter buffer size */
+ /* */
- // Initialize TX Descriptor
- // For inter-frame gap, the number is for this frame and next frame
- // For MLME rate, we will fix as 2Mb to match other vendor's implement
-// pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
+ /* Initialize TX Descriptor */
+ /* For inter-frame gap, the number is for this frame and next frame */
+ /* For MLME rate, we will fix as 2Mb to match other vendor's implement */
+/* pAd->CommonCfg.MlmeTransmit.field.MODE = 1; */
-// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
+/* management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not. */
PID = PID_MGMT;
if (pMacEntry == NULL) {
IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
}
- // Now do hardware-depened kick out.
+ /* Now do hardware-depened kick out. */
HAL_KickOutMgmtTx(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen);
- // Make sure to release MGMT ring resource
-// if (!IrqState)
+ /* Make sure to release MGMT ring resource */
+/* if (!IrqState) */
RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
return NDIS_STATUS_SUCCESS;
}
BOOLEAN bHTRate = FALSE;
Wcid = RTMP_GET_PACKET_WCID(pPacket);
- if (Wcid == MCAST_WCID) { // Handle for RA is Broadcast/Multicast Address.
+ if (Wcid == MCAST_WCID) { /* Handle for RA is Broadcast/Multicast Address. */
return TX_MCAST_FRAME;
}
- // Handle for unicast packets
+ /* Handle for unicast packets */
pMacEntry = &pAd->MacTab.Content[Wcid];
- if (RTMP_GET_PACKET_LOWRATE(pPacket)) { // It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame
+ if (RTMP_GET_PACKET_LOWRATE(pPacket)) { /* It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame */
TxFrameType = TX_LEGACY_FRAME;
- } else if (IS_HT_RATE(pMacEntry)) { // it's a 11n capable packet
+ } else if (IS_HT_RATE(pMacEntry)) { /* it's a 11n capable packet */
- // Depends on HTPhyMode to check if the peer support the HTRate transmission.
- // Currently didn't support A-MSDU embedded in A-MPDU
+ /* Depends on HTPhyMode to check if the peer support the HTRate transmission. */
+ /* Currently didn't support A-MSDU embedded in A-MPDU */
bHTRate = TRUE;
if (RTMP_GET_PACKET_MOREDATA(pPacket)
|| (pMacEntry->PsMode == PWR_SAVE))
return TX_AMSDU_FRAME;
else
TxFrameType = TX_LEGACY_FRAME;
- } else { // it's a legacy b/g packet.
- if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) && (RTMP_GET_PACKET_TXRATE(pPacket) >= RATE_6) && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) { // if peer support Ralink Aggregation, we use it.
+ } else { /* it's a legacy b/g packet. */
+ if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) && (RTMP_GET_PACKET_TXRATE(pPacket) >= RATE_6) && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) { /* if peer support Ralink Aggregation, we use it. */
TxFrameType = TX_RALINK_FRAME;
} else {
TxFrameType = TX_LEGACY_FRAME;
}
}
- // Currently, our fragment only support when a unicast packet send as NOT-ARALINK, NOT-AMSDU and NOT-AMPDU.
+ /* Currently, our fragment only support when a unicast packet send as NOT-ARALINK, NOT-AMSDU and NOT-AMPDU. */
if ((RTMP_GET_PACKET_FRAGMENTS(pPacket) > 1)
&& (TxFrameType == TX_LEGACY_FRAME))
TxFrameType = TX_FRAG_FRAME;
pTxBlk->Wcid = RTMP_GET_PACKET_WCID(pPacket);
pTxBlk->apidx = RTMP_GET_PACKET_IF(pPacket);
pTxBlk->UserPriority = RTMP_GET_PACKET_UP(pPacket);
- pTxBlk->FrameGap = IFS_HTTXOP; // ASIC determine Frame Gap
+ pTxBlk->FrameGap = IFS_HTTXOP; /* ASIC determine Frame Gap */
if (RTMP_GET_PACKET_CLEAR_EAP_FRAME(pTxBlk->pPacket))
TX_BLK_SET_FLAG(pTxBlk, fTX_bClearEAPFrame);
else
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bClearEAPFrame);
- // Default to clear this flag
+ /* Default to clear this flag */
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bForceNonQoS);
if (pTxBlk->Wcid == MCAST_WCID) {
&pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
}
- TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired); // AckRequired = FALSE, when broadcast packet in Adhoc mode.
- //TX_BLK_SET_FLAG(pTxBlk, fTX_bForceLowRate);
+ TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired); /* AckRequired = FALSE, when broadcast packet in Adhoc mode. */
+ /*TX_BLK_SET_FLAG(pTxBlk, fTX_bForceLowRate); */
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAllowFrag);
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
if (RTMP_GET_PACKET_MOREDATA(pPacket)) {
pMacEntry = pTxBlk->pMacEntry;
- // For all unicast packets, need Ack unless the Ack Policy is not set as NORMAL_ACK.
+ /* For all unicast packets, need Ack unless the Ack Policy is not set as NORMAL_ACK. */
if (pAd->CommonCfg.AckPolicy[pTxBlk->QueIdx] != NORMAL_ACK)
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);
else
{
{
- // If support WMM, enable it.
+ /* If support WMM, enable it. */
if (OPSTATUS_TEST_FLAG
(pAd, fOP_STATUS_WMM_INUSED)
&& CLIENT_STATUS_TEST_FLAG(pMacEntry,
fCLIENT_STATUS_WMM_CAPABLE))
TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
-// if (pAd->StaCfg.bAutoTxRateSwitch)
-// TX_BLK_SET_FLAG(pTxBlk, fTX_AutoRateSwitch);
+/* if (pAd->StaCfg.bAutoTxRateSwitch) */
+/* TX_BLK_SET_FLAG(pTxBlk, fTX_AutoRateSwitch); */
}
}
if (pTxBlk->TxFrameType == TX_LEGACY_FRAME) {
- if ((RTMP_GET_PACKET_LOWRATE(pPacket)) || ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1))) { // Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate.
+ if ((RTMP_GET_PACKET_LOWRATE(pPacket)) || ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1))) { /* Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate. */
pTxBlk->pTransmit =
&pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
- // Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it???
+ /* Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it??? */
if (IS_HT_STA(pTxBlk->pMacEntry) &&
(CLIENT_STATUS_TEST_FLAG
(pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET))
}
}
- if ((IS_HT_RATE(pMacEntry) == FALSE) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE))) { // Currently piggy-back only support when peer is operate in b/g mode.
+ if ((IS_HT_RATE(pMacEntry) == FALSE) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE))) { /* Currently piggy-back only support when peer is operate in b/g mode. */
TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack);
}
IN NDIS_PACKET * pPacket, IN TX_BLK * pTxBlk)
{
- //DBGPRINT(RT_DEBUG_TRACE, ("Check if can do aggregation! TxFrameType=%d!\n", pTxBlk->TxFrameType));
+ /*DBGPRINT(RT_DEBUG_TRACE, ("Check if can do aggregation! TxFrameType=%d!\n", pTxBlk->TxFrameType)); */
if (RTMP_GET_PACKET_WCID(pPacket) == MCAST_WCID)
return FALSE;
RTMP_GET_PACKET_EAPOL(pPacket) || RTMP_GET_PACKET_WAI(pPacket))
return FALSE;
- if ((pTxBlk->TxFrameType == TX_AMSDU_FRAME) && ((pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket)) > (RX_BUFFER_AGGRESIZE - 100))) { // For AMSDU, allow the packets with total length < max-amsdu size
+ if ((pTxBlk->TxFrameType == TX_AMSDU_FRAME) && ((pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket)) > (RX_BUFFER_AGGRESIZE - 100))) { /* For AMSDU, allow the packets with total length < max-amsdu size */
return FALSE;
}
- if ((pTxBlk->TxFrameType == TX_RALINK_FRAME) && (pTxBlk->TxPacketList.Number == 2)) { // For RALINK-Aggregation, allow two frames in one batch.
+ if ((pTxBlk->TxFrameType == TX_RALINK_FRAME) && (pTxBlk->TxPacketList.Number == 2)) { /* For RALINK-Aggregation, allow two frames in one batch. */
return FALSE;
}
- if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
+ if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) /* must be unicast to AP */
return TRUE;
else
return FALSE;
if (QIdx == NUM_OF_TX_RING) {
sQIdx = 0;
- eQIdx = 3; // 4 ACs, start from 0.
+ eQIdx = 3; /* 4 ACs, start from 0. */
} else {
sQIdx = eQIdx = QIdx;
}
FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNumber[QueIdx] <= 5) {
- // free Tx(QueIdx) resources
+ /* free Tx(QueIdx) resources */
RTMPFreeTXDUponTxDmaDone(pAd, QueIdx);
FreeNumber[QueIdx] =
GET_TXRING_FREENO(pAd, QueIdx);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // probe the Queue Head
+ /* probe the Queue Head */
pQueue = &pAd->TxSwQueue[QueIdx];
if ((pEntry = pQueue->Head) == NULL) {
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext,
pTxBlk = &TxBlk;
NdisZeroMemory((PUCHAR) pTxBlk, sizeof(TX_BLK));
- //InitializeQueueHeader(&pTxBlk->TxPacketList); // Didn't need it because we already memzero it.
+ /*InitializeQueueHeader(&pTxBlk->TxPacketList); // Didn't need it because we already memzero it. */
pTxBlk->QueIdx = QueIdx;
pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
- // Early check to make sure we have enoguh Tx Resource.
+ /* Early check to make sure we have enoguh Tx Resource. */
hasTxDesc =
RTMP_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk,
FreeNumber[QueIdx],
pTxBlk->TxFrameType = TxPktClassification(pAd, pPacket);
pEntry = RemoveHeadQueue(pQueue);
pTxBlk->TotalFrameNum++;
- pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket); // The real fragment number maybe vary
+ pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket); /* The real fragment number maybe vary */
pTxBlk->TotalFrameLen += GET_OS_PKT_LEN(pPacket);
pTxBlk->pPacket = pPacket;
InsertTailQueue(&pTxBlk->TxPacketList,
if (pTxBlk->TxFrameType == TX_RALINK_FRAME
|| pTxBlk->TxFrameType == TX_AMSDU_FRAME) {
- // Enhance SW Aggregation Mechanism
+ /* Enhance SW Aggregation Mechanism */
if (NEED_QUEUE_BACK_FOR_AGG
(pAd, QueIdx, FreeNumber[QueIdx],
pTxBlk->TxFrameType)) {
if ((pEntry = pQueue->Head) == NULL)
break;
- // For TX_AMSDU_FRAME/TX_RALINK_FRAME, Need to check if next pakcet can do aggregation.
+ /* For TX_AMSDU_FRAME/TX_RALINK_FRAME, Need to check if next pakcet can do aggregation. */
pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
FreeNumber[QueIdx] =
GET_TXRING_FREENO(pAd, QueIdx);
(pAd, pPacket, pTxBlk) == FALSE))
break;
- //Remove the packet from the TxSwQueue and insert into pTxBlk
+ /*Remove the packet from the TxSwQueue and insert into pTxBlk */
pEntry = RemoveHeadQueue(pQueue);
ASSERT(pEntry);
pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
pTxBlk->TotalFrameNum++;
- pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket); // The real fragment number maybe vary
+ pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket); /* The real fragment number maybe vary */
pTxBlk->TotalFrameLen +=
GET_OS_PKT_LEN(pPacket);
InsertTailQueue(&pTxBlk->TxPacketList,
}
#ifdef RTMP_MAC_USB
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
Count += pTxBlk->TxPacketList.Number;
- // Do HardTransmit now.
+ /* Do HardTransmit now. */
Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
#ifdef RTMP_MAC_PCI
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
- // static rate also need NICUpdateFifoStaCounters() function.
- //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
+ /* static rate also need NICUpdateFifoStaCounters() function. */
+ /*if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */
NICUpdateFifoStaCounters(pAd);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
}
#ifdef RTMP_MAC_USB
if (!hasTxDesc)
RTUSBKickBulkOut(pAd);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
}
}
{
ULONG Duration = 0;
- if (Rate < RATE_FIRST_OFDM_RATE) // CCK
+ if (Rate < RATE_FIRST_OFDM_RATE) /* CCK */
{
if ((Rate > RATE_1)
&& OPSTATUS_TEST_FLAG(pAd,
fOP_STATUS_SHORT_PREAMBLE_INUSED))
- Duration = 96; // 72+24 preamble+plcp
+ Duration = 96; /* 72+24 preamble+plcp */
else
- Duration = 192; // 144+48 preamble+plcp
+ Duration = 192; /* 144+48 preamble+plcp */
Duration += (USHORT) ((Size << 4) / RateIdTo500Kbps[Rate]);
if ((Size << 4) % RateIdTo500Kbps[Rate])
Duration++;
- } else if (Rate <= RATE_LAST_OFDM_RATE) // OFDM rates
+ } else if (Rate <= RATE_LAST_OFDM_RATE) /* OFDM rates */
{
- Duration = 20 + 6; // 16+4 preamble+plcp + Signal Extension
+ Duration = 20 + 6; /* 16+4 preamble+plcp + Signal Extension */
Duration +=
4 * (USHORT) ((11 + Size * 4) / RateIdTo500Kbps[Rate]);
if ((11 + Size * 4) % RateIdTo500Kbps[Rate])
Duration += 4;
- } else //mimo rate
+ } else /*mimo rate */
{
- Duration = 20 + 6; // 16+4 preamble+plcp + Signal Extension
+ Duration = 20 + 6; /* 16+4 preamble+plcp + Signal Extension */
}
return (USHORT) Duration;
========================================================================
*/
-VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, // HW new a sequence.
+VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, /* HW new a sequence. */
IN UCHAR BASize,
IN UCHAR WCID,
IN ULONG Length,
if (WCID < MAX_LEN_OF_MAC_TABLE)
pMac = &pAd->MacTab.Content[WCID];
- //
- // Always use Long preamble before verifiation short preamble functionality works well.
- // Todo: remove the following line if short preamble functionality works
- //
+ /* */
+ /* Always use Long preamble before verifiation short preamble functionality works well. */
+ /* Todo: remove the following line if short preamble functionality works */
+ /* */
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
NdisZeroMemory(&TxWI, TXWI_SIZE);
pTxWI = &TxWI;
pTxWI->txop = Txopmode;
pTxWI->NSEQ = NSeq;
- // John tune the performace with Intel Client in 20 MHz performance
+ /* John tune the performace with Intel Client in 20 MHz performance */
BASize = pAd->CommonCfg.TxBASize;
if (pAd->MACVersion == 0x28720200) {
if (BASize > 13)
pTxWI->MPDUtotalByteCount = Length;
pTxWI->PacketId = PID;
- // If CCK or OFDM, BW must be 20
+ /* If CCK or OFDM, BW must be 20 */
pTxWI->BW =
(pTransmit->field.MODE <=
MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
if (pAd->CommonCfg.bMIMOPSEnable) {
if ((pMac->MmpsMode == MMPS_DYNAMIC)
&& (pTransmit->field.MCS > 7)) {
- // Dynamic MIMO Power Save Mode
+ /* Dynamic MIMO Power Save Mode */
pTxWI->MIMOps = 1;
} else if (pMac->MmpsMode == MMPS_STATIC) {
- // Static MIMO Power Save Mode
+ /* Static MIMO Power Save Mode */
if (pTransmit->field.MODE >= MODE_HTMIX
&& pTransmit->field.MCS > 7) {
pTxWI->MCS = 7;
}
}
}
- //pTxWI->MIMOps = (pMac->PsMode == PWR_MMPS)? 1:0;
+ /*pTxWI->MIMOps = (pMac->PsMode == PWR_MMPS)? 1:0; */
if (pMac->bIAmBadAtheros
&& (pMac->WepStatus != Ndis802_11WEPDisabled)) {
pTxWI->MpduDensity = 7;
pTransmit = pTxBlk->pTransmit;
pMacEntry = pTxBlk->pMacEntry;
- //
- // Always use Long preamble before verifiation short preamble functionality works well.
- // Todo: remove the following line if short preamble functionality works
- //
+ /* */
+ /* Always use Long preamble before verifiation short preamble functionality works well. */
+ /* Todo: remove the following line if short preamble functionality works */
+ /* */
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
NdisZeroMemory(pTxWI, TXWI_SIZE);
pTxWI->MPDUtotalByteCount = pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
pTxWI->CFACK = TX_BLK_TEST_FLAG(pTxBlk, fTX_bPiggyBack);
- // If CCK or OFDM, BW must be 20
+ /* If CCK or OFDM, BW must be 20 */
pTxWI->BW =
(pTransmit->field.MODE <=
MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
pTxWI->AMPDU = ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE);
- // John tune the performace with Intel Client in 20 MHz performance
+ /* John tune the performace with Intel Client in 20 MHz performance */
BASize = pAd->CommonCfg.TxBASize;
if ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) && (pMacEntry)) {
- UCHAR RABAOriIdx = 0; //The RA's BA Originator table index.
+ UCHAR RABAOriIdx = 0; /*The RA's BA Originator table index. */
RABAOriIdx =
pTxBlk->pMacEntry->BAOriWcidArray[pTxBlk->UserPriority];
if (pMacEntry) {
if ((pMacEntry->MmpsMode == MMPS_DYNAMIC)
&& (pTransmit->field.MCS > 7)) {
- // Dynamic MIMO Power Save Mode
+ /* Dynamic MIMO Power Save Mode */
pTxWI->MIMOps = 1;
} else if (pMacEntry->MmpsMode == MMPS_STATIC) {
- // Static MIMO Power Save Mode
+ /* Static MIMO Power Save Mode */
if (pTransmit->field.MODE >= MODE_HTMIX
&& pTransmit->field.MCS > 7) {
pTxWI->MCS = 7;
}
}
- // for rate adapation
+ /* for rate adapation */
pTxWI->PacketId = pTxWI->MCS;
}
PHTTRANSMIT_SETTING /*pTxHTPhyMode, */ pTransmit;
PMAC_TABLE_ENTRY pMacEntry;
- //
- // update TXWI
- //
+ /* */
+ /* update TXWI */
+ /* */
pMacEntry = pTxBlk->pMacEntry;
pTransmit = pTxBlk->pTransmit;
- //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
- //if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pMacEntry))
- //if (TX_BLK_TEST_FLAG(pTxBlk, fTX_AutoRateSwitch))
+ /*if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */
+ /*if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pMacEntry)) */
+ /*if (TX_BLK_TEST_FLAG(pTxBlk, fTX_AutoRateSwitch)) */
if (pMacEntry->bAutoTxRateSwitch) {
pTxWI->txop = IFS_HTTXOP;
- // If CCK or OFDM, BW must be 20
+ /* If CCK or OFDM, BW must be 20 */
pTxWI->BW =
(pTransmit->field.MODE <=
MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
pTxWI->MCS = pTransmit->field.MCS;
pTxWI->PHYMODE = pTransmit->field.MODE;
- // set PID for TxRateSwitching
+ /* set PID for TxRateSwitching */
pTxWI->PacketId = pTransmit->field.MCS;
}
pTxWI->MIMOps = 0;
if (pAd->CommonCfg.bMIMOPSEnable) {
- // MIMO Power Save Mode
+ /* MIMO Power Save Mode */
if ((pMacEntry->MmpsMode == MMPS_DYNAMIC)
&& (pTransmit->field.MCS > 7)) {
- // Dynamic MIMO Power Save Mode
+ /* Dynamic MIMO Power Save Mode */
pTxWI->MIMOps = 1;
} else if (pMacEntry->MmpsMode == MMPS_STATIC) {
- // Static MIMO Power Save Mode
+ /* Static MIMO Power Save Mode */
if ((pTransmit->field.MODE >= MODE_HTMIX)
&& (pTransmit->field.MCS > 7)) {
pTxWI->MCS = 7;
}
-// should be called only when -
-// 1. MEADIA_CONNECTED
-// 2. AGGREGATION_IN_USED
-// 3. Fragmentation not in used
-// 4. either no previous frame (pPrevAddr1=NULL) .OR. previoud frame is aggregatible
+/* should be called only when - */
+/* 1. MEADIA_CONNECTED */
+/* 2. AGGREGATION_IN_USED */
+/* 3. Fragmentation not in used */
+/* 4. either no previous frame (pPrevAddr1=NULL) .OR. previoud frame is aggregatible */
BOOLEAN TxFrameIsAggregatible(IN PRTMP_ADAPTER pAd,
IN PUCHAR pPrevAddr1, IN PUCHAR p8023hdr)
{
- // can't aggregate EAPOL (802.1x) frame
+ /* can't aggregate EAPOL (802.1x) frame */
if ((p8023hdr[12] == 0x88) && (p8023hdr[13] == 0x8e))
return FALSE;
- // can't aggregate multicast/broadcast frame
+ /* can't aggregate multicast/broadcast frame */
if (p8023hdr[0] & 0x01)
return FALSE;
- if (INFRA_ON(pAd)) // must be unicast to AP
+ if (INFRA_ON(pAd)) /* must be unicast to AP */
return TRUE;
- else if ((pPrevAddr1 == NULL) || MAC_ADDR_EQUAL(pPrevAddr1, p8023hdr)) // unicast to same STA
+ else if ((pPrevAddr1 == NULL) || MAC_ADDR_EQUAL(pPrevAddr1, p8023hdr)) /* unicast to same STA */
return TRUE;
else
return FALSE;
return TRUE;
}
#ifdef AGGREGATION_SUPPORT
- if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) { // legacy Ralink Aggregation support
+ if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) { /* legacy Ralink Aggregation support */
return TRUE;
}
-#endif // AGGREGATION_SUPPORT //
+#endif /* AGGREGATION_SUPPORT // */
}
return FALSE;
{
ULONG Number;
- // 2004-11-15 to be removed. test aggregation only
-// if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)) && (*pNumber < 2))
-// return NULL;
+ /* 2004-11-15 to be removed. test aggregation only */
+/* if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)) && (*pNumber < 2)) */
+/* return NULL; */
Number = pAd->TxSwQueue[QID_AC_BK].Number
+ pAd->TxSwQueue[QID_AC_BE].Number
*pQueIdx = QID_AC_BK;
return (&pAd->TxSwQueue[QID_AC_BK]);
}
- // No packet pending in Tx Sw queue
+ /* No packet pending in Tx Sw queue */
*pQueIdx = QID_AC_BK;
return (NULL);
{
DBGPRINT(RT_DEBUG_TRACE, ("SCANNING, suspend MSDU transmission ...\n"));
- //
- // Before BSS_SCAN_IN_PROGRESS, we need to keep Current R66 value and
- // use Lowbound as R66 value on ScanNextChannel(...)
- //
+ /* */
+ /* Before BSS_SCAN_IN_PROGRESS, we need to keep Current R66 value and */
+ /* use Lowbound as R66 value on ScanNextChannel(...) */
+ /* */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66,
&pAd->BbpTuning.R66CurrentValue);
- // set BBP_R66 to 0x30/0x40 when scanning (AsicSwitchChannel will set R66 according to channel when scanning)
- //RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x26 + GET_LNA_GAIN(pAd)));
+ /* set BBP_R66 to 0x30/0x40 when scanning (AsicSwitchChannel will set R66 according to channel when scanning) */
+ /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x26 + GET_LNA_GAIN(pAd))); */
RTMPSetAGCInitValue(pAd, BW_20);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
- //RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x000f0000); // abort all TX rings
+ /*RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x000f0000); // abort all TX rings */
}
/*
*/
VOID RTMPResumeMsduTransmission(IN PRTMP_ADAPTER pAd)
{
-// UCHAR IrqState;
+/* UCHAR IrqState; */
DBGPRINT(RT_DEBUG_TRACE, ("SCAN done, resume MSDU transmission ...\n"));
- // After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value
- // R66 should not be 0
+ /* After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value */
+ /* R66 should not be 0 */
if (pAd->BbpTuning.R66CurrentValue == 0) {
pAd->BbpTuning.R66CurrentValue = 0x38;
DBGPRINT_ERR(("RTMPResumeMsduTransmission, R66CurrentValue=0...\n"));
pAd->BbpTuning.R66CurrentValue);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-// sample, for IRQ LOCK to SEM LOCK
-// IrqState = pAd->irq_disabled;
-// if (IrqState)
-// RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-// else
+/* sample, for IRQ LOCK to SEM LOCK */
+/* IrqState = pAd->irq_disabled; */
+/* if (IrqState) */
+/* RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS); */
+/* else */
RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
}
nMSDU++;
- //hex_dump("subheader", pData, 64);
+ /*hex_dump("subheader", pData, 64); */
pAMSDUsubheader = (PHEADER_802_3) pData;
- //pData += LENGTH_802_3;
+ /*pData += LENGTH_802_3; */
PayloadSize =
pAMSDUsubheader->Octet[1] +
(pAMSDUsubheader->Octet[0] << 8);
if ((DataSize < SubFrameSize) || (PayloadSize > 1518)) {
break;
}
- //DBGPRINT(RT_DEBUG_TRACE,("%d subframe: Size = %d\n", nMSDU, PayloadSize));
+ /*DBGPRINT(RT_DEBUG_TRACE,("%d subframe: Size = %d\n", nMSDU, PayloadSize)); */
pPayload = pData + LENGTH_802_3;
pDA = pData;
pSA = pData + MAC_ADDR_LEN;
- // convert to 802.3 header
+ /* convert to 802.3 header */
CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize,
pRemovedLLCSNAP);
Elem->MsgLen =
LENGTH_802_11 + LENGTH_802_1_H +
PayloadSize;
- //WpaEAPOLKeyAction(pAd, Elem);
+ /*WpaEAPOLKeyAction(pAd, Elem); */
REPORT_MGMT_FRAME_TO_MLME(pAd, BSSID_WCID,
Elem->Msg,
Elem->MsgLen, 0, 0, 0,
(pPacket));
}
- // A-MSDU has padding to multiple of 4 including subframe header.
- // align SubFrameSize up to multiple of 4
+ /* A-MSDU has padding to multiple of 4 including subframe header. */
+ /* align SubFrameSize up to multiple of 4 */
SubFrameSize = (SubFrameSize + 3) & (~0x3);
if (SubFrameSize > 1528 || SubFrameSize < 32) {
pData += SubFrameSize;
DataSize -= SubFrameSize;
} else {
- // end of A-MSDU
+ /* end of A-MSDU */
DataSize = 0;
}
}
- // finally release original rx packet
+ /* finally release original rx packet */
RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
return nMSDU;
UCHAR HashIdx;
int i, FirstWcid;
MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
-// USHORT offset;
-// ULONG addr;
+/* USHORT offset; */
+/* ULONG addr; */
- // if FULL, return
+ /* if FULL, return */
if (pAd->MacTab.Size >= MAX_LEN_OF_MAC_TABLE)
return NULL;
if (pAd->StaCfg.BssType == BSS_INFRA)
FirstWcid = 2;
- // allocate one MAC entry
+ /* allocate one MAC entry */
NdisAcquireSpinLock(&pAd->MacTabLock);
- for (i = FirstWcid; i < MAX_LEN_OF_MAC_TABLE; i++) // skip entry#0 so that "entry index == AID" for fast lookup
+ for (i = FirstWcid; i < MAX_LEN_OF_MAC_TABLE; i++) /* skip entry#0 so that "entry index == AID" for fast lookup */
{
- // pick up the first available vacancy
+ /* pick up the first available vacancy */
if ((pAd->MacTab.Content[i].ValidAsCLI == FALSE) &&
(pAd->MacTab.Content[i].ValidAsWDS == FALSE) &&
(pAd->MacTab.Content[i].ValidAsApCli == FALSE) &&
pEntry->
apidx,
(UCHAR) i);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
}
}
COPY_MAC_ADDR(pEntry->Addr, pAddr);
pEntry->Sst = SST_NOT_AUTH;
pEntry->AuthState = AS_NOT_AUTH;
- pEntry->Aid = (USHORT) i; //0;
+ pEntry->Aid = (USHORT) i; /*0; */
pEntry->CapabilityInfo = 0;
pEntry->PsMode = PWR_ACTIVE;
pEntry->PsQIdleCount = 0;
InitializeQueueHeader(&pEntry->PsQueue);
pAd->MacTab.Size++;
- // Add this entry into ASIC RX WCID search table
+ /* Add this entry into ASIC RX WCID search table */
RTMP_STA_ENTRY_ADD(pAd, pEntry);
DBGPRINT(RT_DEBUG_TRACE,
}
}
- // add this MAC entry into HASH table
+ /* add this MAC entry into HASH table */
if (pEntry) {
HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
if (pAd->MacTab.Hash[HashIdx] == NULL) {
USHORT HashIdx;
MAC_TABLE_ENTRY *pEntry, *pPrevEntry, *pProbeEntry;
BOOLEAN Cancelled;
- //USHORT offset; // unused variable
- //UCHAR j; // unused variable
+ /*USHORT offset; // unused variable */
+ /*UCHAR j; // unused variable */
if (wcid >= MAX_LEN_OF_MAC_TABLE)
return FALSE;
NdisAcquireSpinLock(&pAd->MacTabLock);
HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
- //pEntry = pAd->MacTab.Hash[HashIdx];
+ /*pEntry = pAd->MacTab.Hash[HashIdx]; */
pEntry = &pAd->MacTab.Content[wcid];
if (pEntry
|| pEntry->ValidAsMesh)) {
if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr)) {
- // Delete this entry from ASIC on-chip WCID Table
+ /* Delete this entry from ASIC on-chip WCID Table */
RTMP_STA_ENTRY_MAC_RESET(pAd, wcid);
- // free resources of BA
+ /* free resources of BA */
BASessionTearDownALL(pAd, pEntry->Aid);
pPrevEntry = NULL;
pProbeEntry = pAd->MacTab.Hash[HashIdx];
ASSERT(pProbeEntry);
- // update Hash list
+ /* update Hash list */
do {
if (pProbeEntry == pEntry) {
if (pPrevEntry == NULL) {
pProbeEntry = pProbeEntry->pNext;
} while (pProbeEntry);
- // not found !!!
+ /* not found !!! */
ASSERT(pProbeEntry != NULL);
RTMP_STA_ENTRY_KEY_DEL(pAd, BSS0, wcid);
NdisReleaseSpinLock(&pAd->MacTabLock);
- //Reset operating mode when no Sta.
+ /*Reset operating mode when no Sta. */
if (pAd->MacTab.Size == 0) {
pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
- //AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
- RTMP_UPDATE_PROTECT(pAd); // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+ RTMP_UPDATE_PROTECT(pAd); /* edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */
}
return TRUE;
int i;
DBGPRINT(RT_DEBUG_TRACE, ("MacTableReset\n"));
- //NdisAcquireSpinLock(&pAd->MacTabLock);
+ /*NdisAcquireSpinLock(&pAd->MacTabLock); */
for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) {
#ifdef RTMP_MAC_PCI
RTMP_STA_ENTRY_MAC_RESET(pAd, i);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
if (pAd->MacTab.Content[i].ValidAsCLI == TRUE) {
- // free resources of BA
+ /* free resources of BA */
BASessionTearDownALL(pAd, i);
pAd->MacTab.Content[i].ValidAsCLI = FALSE;
#ifdef RTMP_MAC_USB
NdisZeroMemory(pAd->MacTab.Content[i].Addr, 6);
RTMP_STA_ENTRY_MAC_RESET(pAd, i);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- //AsicDelWcidTab(pAd, i);
+ /*AsicDelWcidTab(pAd, i); */
}
}
IN ULONG Timeout, IN USHORT ListenIntv)
{
COPY_MAC_ADDR(AssocReq->Addr, pAddr);
- // Add mask to support 802.11b mode only
- AssocReq->CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO; // not cf-pollable, not cf-poll-request
+ /* Add mask to support 802.11b mode only */
+ AssocReq->CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO; /* not cf-pollable, not cf-poll-request */
AssocReq->Timeout = Timeout;
AssocReq->ListenIntv = ListenIntv;
}
pSrc = (PUCHAR) pVirtualAddress;
Protocol = *(pSrc + 12) * 256 + *(pSrc + 13);
- //
- // Check DHCP & BOOTP protocol
- //
+ /* */
+ /* Check DHCP & BOOTP protocol */
+ /* */
while (NumberOfBytesRead <= PacketInfo.TotalPacketLength) {
if ((NumberOfBytesRead >= 35) && (ReadFirstParm == TRUE)) {
CurrentOffset =
CurrentOffset =
37 - (NumberOfBytesRead - NdisBufferLength);
ByteOffset38 = *(pSrc + CurrentOffset);
- //End of Read
+ /*End of Read */
break;
}
return FALSE;
}
- // Check for DHCP & BOOTP protocol
+ /* Check for DHCP & BOOTP protocol */
if ((ByteOffset36 != 0x44) || (ByteOffset38 != 0x43)) {
- //
- // 2054 (hex 0806) for ARP datagrams
- // if this packet is not ARP datagrams, then do nothing
- // ARP datagrams will also be duplicate at 1mb broadcast frames
- //
+ /* */
+ /* 2054 (hex 0806) for ARP datagrams */
+ /* if this packet is not ARP datagrams, then do nothing */
+ /* ARP datagrams will also be duplicate at 1mb broadcast frames */
+ /* */
if (Protocol != 0x0806)
return FALSE;
}
RTMP_SET_PACKET_SPECIFIC(pPacket, 0);
- // get Ethernet protocol field
+ /* get Ethernet protocol field */
TypeLen = (pSrcBuf[12] << 8) | pSrcBuf[13];
- pSrcBuf += LENGTH_802_3; // Skip the Ethernet Header.
+ pSrcBuf += LENGTH_802_3; /* Skip the Ethernet Header. */
- if (TypeLen <= 1500) { // 802.3, 802.3 LLC
+ if (TypeLen <= 1500) { /* 802.3, 802.3 LLC */
/*
DestMAC(6) + SrcMAC(6) + Lenght(2) +
DSAP(1) + SSAP(1) + Control(1) +
&Byte0, &Byte1);
RTMP_SET_PACKET_LLCSNAP(pPacket, 1);
TypeLen = (USHORT) ((Byte0 << 8) + Byte1);
- pSrcBuf += 8; // Skip this LLC/SNAP header
+ pSrcBuf += 8; /* Skip this LLC/SNAP header */
} else {
- //It just has 3-byte LLC header, maybe a legacy ether type frame. we didn't handle it.
+ /*It just has 3-byte LLC header, maybe a legacy ether type frame. we didn't handle it. */
}
}
- // If it's a VLAN packet, get the real Type/Length field.
+ /* If it's a VLAN packet, get the real Type/Length field. */
if (TypeLen == 0x8100) {
/* 0x8100 means VLAN packets */
&Byte1);
TypeLen = (USHORT) ((Byte0 << 8) + Byte1);
- pSrcBuf += 4; // Skip the VLAN Header.
+ pSrcBuf += 4; /* Skip the VLAN Header. */
}
switch (TypeLen) {
case 0x0800:
{
ASSERT((pktLen > 34));
- if (*(pSrcBuf + 9) == 0x11) { // udp packet
- ASSERT((pktLen > 34)); // 14 for ethernet header, 20 for IP header
+ if (*(pSrcBuf + 9) == 0x11) { /* udp packet */
+ ASSERT((pktLen > 34)); /* 14 for ethernet header, 20 for IP header */
- pSrcBuf += 20; // Skip the IP header
+ pSrcBuf += 20; /* Skip the IP header */
srcPort =
OS_NTOHS(get_unaligned
((PUINT16) (pSrcBuf)));
OS_NTOHS(get_unaligned
((PUINT16) (pSrcBuf + 2)));
- if ((srcPort == 0x44 && dstPort == 0x43) || (srcPort == 0x43 && dstPort == 0x44)) { //It's a BOOTP/DHCP packet
+ if ((srcPort == 0x44 && dstPort == 0x43) || (srcPort == 0x43 && dstPort == 0x44)) { /*It's a BOOTP/DHCP packet */
RTMP_SET_PACKET_DHCP(pPacket, 1);
}
}
break;
case 0x0806:
{
- //ARP Packet.
+ /*ARP Packet. */
RTMP_SET_PACKET_DHCP(pPacket, 1);
}
break;
case 0x888e:
{
- // EAPOL Packet.
+ /* EAPOL Packet. */
RTMP_SET_PACKET_EAPOL(pPacket, 1);
}
break;
}
}
-// Normal legacy Rx packet indication
+/* Normal legacy Rx packet indication */
VOID Indicate_Legacy_Packet(IN PRTMP_ADAPTER pAd,
IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID)
{
PNDIS_PACKET pRxPacket = pRxBlk->pRxPacket;
UCHAR Header802_3[LENGTH_802_3];
- // 1. get 802.3 Header
- // 2. remove LLC
- // a. pointer pRxBlk->pData to payload
- // b. modify pRxBlk->DataSize
+ /* 1. get 802.3 Header */
+ /* 2. remove LLC */
+ /* a. pointer pRxBlk->pData to payload */
+ /* b. modify pRxBlk->DataSize */
RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
if (pRxBlk->DataSize > MAX_RX_PKT_LEN) {
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
return;
}
UCHAR TID = pRxBlk->pRxWI->TID;
USHORT Idx;
-#define REORDERING_PACKET_TIMEOUT ((100 * OS_HZ)/1000) // system ticks -- 100 ms
+#define REORDERING_PACKET_TIMEOUT ((100 * OS_HZ)/1000) /* system ticks -- 100 ms */
if (Wcid < MAX_LEN_OF_MAC_TABLE) {
Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
if (Idx != 0) {
pBAEntry = &pAd->BATable.BARecEntry[Idx];
- // update last rx time
+ /* update last rx time */
NdisGetSystemUpTime(&Now32);
if ((pBAEntry->list.qlen > 0) &&
RTMP_TIME_AFTER((unsigned long)Now32,
}
}
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
- //
- // pass this 802.3 packet to upper layer or forward this packet to WM directly
- //
+ /* */
+ /* pass this 802.3 packet to upper layer or forward this packet to WM directly */
+ /* */
ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
}
-// Normal, AMPDU or AMSDU
+/* Normal, AMPDU or AMSDU */
VOID CmmRxnonRalinkFrameIndicate(IN PRTMP_ADAPTER pAd,
IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID)
{
Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
} else {
if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)) {
- // handle A-MSDU
+ /* handle A-MSDU */
Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID);
} else {
Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
pRxBlk->pData += 2;
pRxBlk->DataSize -= 2;
} else {
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
return;
}
- // get 802.3 Header and remove LLC
+ /* get 802.3 Header and remove LLC */
RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
ASSERT(pRxBlk->pRxPacket);
- // Ralink Aggregation frame
+ /* Ralink Aggregation frame */
pAd->RalinkCounters.OneSecRxAggregationCount++;
Payload1Size = pRxBlk->DataSize - Msdu2Size;
Payload2Size = Msdu2Size - LENGTH_802_3;
Payload2Size, FromWhichBSSID);
if (!pPacket2) {
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
return;
}
- // update payload size of 1st packet
+ /* update payload size of 1st packet */
pRxBlk->DataSize = Payload1Size;
wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
HeaderRoom = pData - (UCHAR *) pHeader;
- // Re-assemble the fragmented packets
- if (pHeader->Frag == 0) // Frag. Number is 0 : First frag or only one pkt
+ /* Re-assemble the fragmented packets */
+ if (pHeader->Frag == 0) /* Frag. Number is 0 : First frag or only one pkt */
{
- // the first pkt of fragment, record it.
+ /* the first pkt of fragment, record it. */
if (pHeader->FC.MoreFrag) {
ASSERT(pAd->FragFrame.pFragPacket);
pFragBuffer =
NdisMoveMemory(pFragBuffer, pHeader,
pAd->FragFrame.RxSize);
pAd->FragFrame.Sequence = pHeader->Sequence;
- pAd->FragFrame.LastFrag = pHeader->Frag; // Should be 0
+ pAd->FragFrame.LastFrag = pHeader->Frag; /* Should be 0 */
ASSERT(pAd->FragFrame.LastFrag == 0);
- goto done; // end of processing this frame
+ goto done; /* end of processing this frame */
}
- } else //Middle & End of fragment
+ } else /*Middle & End of fragment */
{
if ((pHeader->Sequence != pAd->FragFrame.Sequence) ||
(pHeader->Frag != (pAd->FragFrame.LastFrag + 1))) {
- // Fragment is not the same sequence or out of fragment number order
- // Reset Fragment control blk
+ /* Fragment is not the same sequence or out of fragment number order */
+ /* Reset Fragment control blk */
RESET_FRAGFRAME(pAd->FragFrame);
DBGPRINT(RT_DEBUG_ERROR,
("Fragment is not the same sequence or out of fragment number order.\n"));
- goto done; // give up this frame
+ goto done; /* give up this frame */
} else if ((pAd->FragFrame.RxSize + DataSize) > MAX_FRAME_SIZE) {
- // Fragment frame is too large, it exeeds the maximum frame size.
- // Reset Fragment control blk
+ /* Fragment frame is too large, it exeeds the maximum frame size. */
+ /* Reset Fragment control blk */
RESET_FRAGFRAME(pAd->FragFrame);
DBGPRINT(RT_DEBUG_ERROR,
("Fragment frame is too large, it exeeds the maximum frame size.\n"));
- goto done; // give up this frame
+ goto done; /* give up this frame */
}
- //
- // Broadcom AP(BCM94704AGR) will send out LLC in fragment's packet, LLC only can accpet at first fragment.
- // In this case, we will dropt it.
- //
+ /* */
+ /* Broadcom AP(BCM94704AGR) will send out LLC in fragment's packet, LLC only can accpet at first fragment. */
+ /* In this case, we will dropt it. */
+ /* */
if (NdisEqualMemory(pData, SNAP_802_1H, sizeof(SNAP_802_1H))) {
DBGPRINT(RT_DEBUG_ERROR,
("Find another LLC at Middle or End fragment(SN=%d, Frag=%d)\n",
pHeader->Sequence, pHeader->Frag));
- goto done; // give up this frame
+ goto done; /* give up this frame */
}
pFragBuffer = GET_OS_PKT_DATAPTR(pAd->FragFrame.pFragPacket);
- // concatenate this fragment into the re-assembly buffer
+ /* concatenate this fragment into the re-assembly buffer */
NdisMoveMemory((pFragBuffer + pAd->FragFrame.RxSize), pData,
DataSize);
pAd->FragFrame.RxSize += DataSize;
- pAd->FragFrame.LastFrag = pHeader->Frag; // Update fragment number
+ pAd->FragFrame.LastFrag = pHeader->Frag; /* Update fragment number */
- // Last fragment
+ /* Last fragment */
if (pHeader->FC.MoreFrag == FALSE) {
bReassDone = TRUE;
}
}
done:
- // always release rx fragmented packet
+ /* always release rx fragmented packet */
RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
- // return defragmented packet if packet is reassembled completely
- // otherwise return NULL
+ /* return defragmented packet if packet is reassembled completely */
+ /* otherwise return NULL */
if (bReassDone) {
PNDIS_PACKET pNewFragPacket;
- // allocate a new packet buffer for fragment
+ /* allocate a new packet buffer for fragment */
pNewFragPacket =
RTMP_AllocateFragPacketBuffer(pAd, RX_BUFFER_NORMSIZE);
if (pNewFragPacket) {
- // update RxBlk
+ /* update RxBlk */
pRetPacket = pAd->FragFrame.pFragPacket;
pAd->FragFrame.pFragPacket = pNewFragPacket;
pRxBlk->pHeader =
if (pEntry == NULL) {
DBGPRINT(RT_DEBUG_WARN,
("Indicate_EAPOL_Packet: drop and release the invalid packet.\n"));
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
return;
}
}
-#define BCN_TBTT_OFFSET 64 //defer 64 us
+#define BCN_TBTT_OFFSET 64 /*defer 64 us */
VOID ReSyncBeaconTime(IN PRTMP_ADAPTER pAd)
{
pAd->TbttTickCount++;
- //
- // The updated BeaconInterval Value will affect Beacon Interval after two TBTT
- // beacasue the original BeaconInterval had been loaded into next TBTT_TIMER
- //
+ /* */
+ /* The updated BeaconInterval Value will affect Beacon Interval after two TBTT */
+ /* beacasue the original BeaconInterval had been loaded into next TBTT_TIMER */
+ /* */
if (Offset == (BCN_TBTT_OFFSET - 2)) {
BCN_TIME_CFG_STRUC csr;
RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
- csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod << 4) - 1; // ASIC register in units of 1/16 TU = 64us
+ csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod << 4) - 1; /* ASIC register in units of 1/16 TU = 64us */
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
} else {
if (Offset == (BCN_TBTT_OFFSET - 1)) {
BCN_TIME_CFG_STRUC csr;
RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
- csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod) << 4; // ASIC register in units of 1/16 TU
+ csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod) << 4; /* ASIC register in units of 1/16 TU */
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
}
}
PRTMP_TX_RING pTxRing;
USHORT hwHeaderLen;
- //
- // get Tx Ring Resource
- //
+ /* */
+ /* get Tx Ring Resource */
+ /* */
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
BufBasePaLow =
RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
- // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
+ /* copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
if (pTxBlk->TxFrameType == TX_AMSDU_FRAME) {
- //hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;
+ /*hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD; */
hwHeaderLen =
pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD +
pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
} else {
- //hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+ /*hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
}
NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf,
pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
- //
- // build Tx Descriptor
- //
+ /* */
+ /* build Tx Descriptor */
+ /* */
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
NdisZeroMemory(pTxD, TXD_SIZE);
pTxD->SDPtr0 = BufBasePaLow;
- pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; // include padding
+ pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; /* include padding */
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = 0;
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
RetTxIdx = TxIdx;
- //
- // Update Tx index
- //
+ /* */
+ /* Update Tx index */
+ /* */
INC_RING_INDEX(TxIdx, TX_RING_SIZE);
pTxRing->TxCpuIdx = TxIdx;
PRTMP_TX_RING pTxRing;
USHORT hwHeaderLen;
- //
- // get Tx Ring Resource
- //
+ /* */
+ /* get Tx Ring Resource */
+ /* */
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
BufBasePaLow =
RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
- // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
- //hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+ /* copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
+ /*hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf,
pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
- //
- // build Tx Descriptor
- //
+ /* */
+ /* build Tx Descriptor */
+ /* */
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
NdisZeroMemory(pTxD, TXD_SIZE);
pTxD->SDPtr0 = BufBasePaLow;
- pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; // include padding
+ pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; /* include padding */
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = 0;
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
RetTxIdx = TxIdx;
- //
- // Update Tx index
- //
+ /* */
+ /* Update Tx index */
+ /* */
INC_RING_INDEX(TxIdx, TX_RING_SIZE);
pTxRing->TxCpuIdx = TxIdx;
bIsLast = ((frameNum == (pTxBlk->TotalFrameNum - 1)) ? 1 : 0);
- //
- // get Tx Ring Resource
- //
+ /* */
+ /* get Tx Ring Resource */
+ /* */
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
if (frameNum == 0) {
- // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
+ /* copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;
+ /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD; */
hwHdrLen =
pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD +
pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
else if (pTxBlk->TxFrameType == TX_RALINK_FRAME)
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD;
+ /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD; */
hwHdrLen =
pTxBlk->MpduHeaderLen -
LENGTH_ARALINK_HEADER_FIELD + pTxBlk->HdrPadLen +
LENGTH_ARALINK_HEADER_FIELD;
else
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+ /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHdrLen;
pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
- //
- // build Tx Descriptor
- //
+ /* */
+ /* build Tx Descriptor */
+ /* */
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
NdisZeroMemory(pTxD, TXD_SIZE);
pTxD->SDPtr0 = BufBasePaLow;
- pTxD->SDLen0 = firstDMALen; // include padding
+ pTxD->SDLen0 = firstDMALen; /* include padding */
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = 0;
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
RetTxIdx = TxIdx;
- //
- // Update Tx index
- //
+ /* */
+ /* Update Tx index */
+ /* */
INC_RING_INDEX(TxIdx, TX_RING_SIZE);
pTxRing->TxCpuIdx = TxIdx;
PTXWI_STRUC pTxWI;
PRTMP_TX_RING pTxRing;
- //
- // get Tx Ring Resource
- //
+ /* */
+ /* get Tx Ring Resource */
+ /* */
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
pTxWI = (PTXWI_STRUC) pTxRing->Cell[FirstTxIdx].DmaBuf.AllocVa;
pTxWI->MPDUtotalByteCount = totalMPDUSize;
PTXD_STRUC pTxD;
PRTMP_TX_RING pTxRing;
- //
- // get Tx Ring Resource
- //
+ /* */
+ /* get Tx Ring Resource */
+ /* */
pTxRing = &pAd->TxRing[QueIdx];
- //
- // build Tx Descriptor
- //
+ /* */
+ /* build Tx Descriptor */
+ /* */
pTxD = (PTXD_STRUC) pTxRing->Cell[LastTxIdx].AllocVa;
pTxD->LastSec1 = 1;
USHORT hwHeaderLen;
UINT32 firstDMALen;
- //
- // Get Tx Ring Resource
- //
+ /* */
+ /* Get Tx Ring Resource */
+ /* */
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
BufBasePaLow =
RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
- //
- // Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
- //
- //hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+ /* */
+ /* Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
+ /* */
+ /*hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen;
NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
- //
- // Build Tx Descriptor
- //
+ /* */
+ /* Build Tx Descriptor */
+ /* */
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
NdisZeroMemory(pTxD, TXD_SIZE);
}
pTxD->SDPtr0 = BufBasePaLow;
- pTxD->SDLen0 = firstDMALen; // include padding
+ pTxD->SDLen0 = firstDMALen; /* include padding */
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = 0;
RetTxIdx = TxIdx;
pTxBlk->Priv += pTxBlk->SrcBufLen;
- //
- // Update Tx index
- //
+ /* */
+ /* Update Tx index */
+ /* */
INC_RING_INDEX(TxIdx, TX_RING_SIZE);
pTxRing->TxCpuIdx = TxIdx;
PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
pTxD->SDLen0 = SrcBufLen;
-//==================================================================
+/*================================================================== */
/* DBGPRINT_RAW(RT_DEBUG_TRACE, ("MLMEHardTransmit\n"));
for (i = 0; i < (TXWI_SIZE+24); i++)
{
DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n "));
}
DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n "));*/
-//=======================================================================
+/*======================================================================= */
pAd->RalinkCounters.KickTxCount++;
pAd->RalinkCounters.OneSecTxDoneCount++;
- // Increase TX_CTX_IDX, but write to register later.
+ /* Increase TX_CTX_IDX, but write to register later. */
INC_RING_INDEX(pAd->MgmtRing.TxCpuIdx, MGMT_RING_SIZE);
RTMP_IO_WRITE32(pAd, TX_MGMTCTX_IDX, pAd->MgmtRing.TxCpuIdx);
PCIPHER_KEY pWpaKey;
INT dBm;
- // Phy errors & CRC errors
+ /* Phy errors & CRC errors */
if ( /*(pRxD->PhyErr) || */ (pRxD->Crc)) {
- // Check RSSI for Noise Hist statistic collection.
+ /* Check RSSI for Noise Hist statistic collection. */
dBm = (INT) (pRxWI->RSSI0) - pAd->BbpRssiToDbmDelta;
if (dBm <= -87)
pAd->StaCfg.RPIDensity[0] += 1;
return (NDIS_STATUS_FAILURE);
}
- // Add Rx size to channel load counter, we should ignore error counts
+ /* Add Rx size to channel load counter, we should ignore error counts */
pAd->StaCfg.CLBusyBytes += (pRxD->SDL0 + 14);
- // Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics
+ /* Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics */
if (pHeader != NULL) {
if (pHeader->FC.ToDs) {
return (NDIS_STATUS_FAILURE);
}
}
- // Drop not U2M frames, cant's drop here because we will drop beacon in this case
- // I am kind of doubting the U2M bit operation
- // if (pRxD->U2M == 0)
- // return(NDIS_STATUS_FAILURE);
+ /* Drop not U2M frames, cant's drop here because we will drop beacon in this case */
+ /* I am kind of doubting the U2M bit operation */
+ /* if (pRxD->U2M == 0) */
+ /* return(NDIS_STATUS_FAILURE); */
- // drop decyption fail frame
+ /* drop decyption fail frame */
if (pRxD->CipherErr) {
if (pRxD->CipherErr == 2) {
DBGPRINT_RAW(RT_DEBUG_TRACE,
pRxD->CipherErr, pRxD->SDL0,
pRxD->Mcast | pRxD->Bcast, pRxD->MyBss,
pRxWI->WirelessCliID,
-// CipherName[pRxD->CipherAlg],
+/* CipherName[pRxD->CipherAlg], */
pRxWI->KeyIndex));
- //
- // MIC Error
- //
+ /* */
+ /* MIC Error */
+ /* */
if (pRxD->CipherErr == 2) {
pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex];
if (pAd->StaCfg.WpaSupplicantUP)
PNDIS_PACKET pPacket;
UCHAR FREE = 0;
TXD_STRUC TxD, *pOriTxD;
- //ULONG IrqFlags;
+ /*ULONG IrqFlags; */
BOOLEAN bReschedule = FALSE;
ASSERT(QueIdx < NUM_OF_TX_RING);
RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF,
&pTxRing->TxDmaIdx);
while (pTxRing->TxSwFreeIdx != pTxRing->TxDmaIdx) {
-// RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
+/* RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags); */
- // static rate also need NICUpdateFifoStaCounters() function.
- //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
+ /* static rate also need NICUpdateFifoStaCounters() function. */
+ /*if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */
NICUpdateFifoStaCounters(pAd);
/* Note : If (pAd->ate.bQATxStart == TRUE), we will never reach here. */
RELEASE_NDIS_PACKET(pAd, pPacket,
NDIS_STATUS_SUCCESS);
}
- //Always assign pNdisPacket as NULL after clear
+ /*Always assign pNdisPacket as NULL after clear */
pTxRing->Cell[pTxRing->TxSwFreeIdx].pNdisPacket = NULL;
pPacket =
RELEASE_NDIS_PACKET(pAd, pPacket,
NDIS_STATUS_SUCCESS);
}
- //Always assign pNextNdisPacket as NULL after clear
+ /*Always assign pNextNdisPacket as NULL after clear */
pTxRing->Cell[pTxRing->TxSwFreeIdx].pNextNdisPacket =
NULL;
}
&pTxRing->TxDmaIdx);
NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
-// RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
+/* RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags); */
}
return bReschedule;
BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(IN PRTMP_ADAPTER pAd,
IN INT_SOURCE_CSR_STRUC TxRingBitmap)
{
-// UCHAR Count = 0;
+/* UCHAR Count = 0; */
unsigned long IrqFlags;
BOOLEAN bReschedule = FALSE;
- // Make sure Tx ring resource won't be used by other threads
- //NdisAcquireSpinLock(&pAd->TxRingLock);
+ /* Make sure Tx ring resource won't be used by other threads */
+ /*NdisAcquireSpinLock(&pAd->TxRingLock); */
RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
if (TxRingBitmap.field.Ac1DmaDone)
bReschedule |= RTMPFreeTXDUponTxDmaDone(pAd, QID_AC_BK);
- // Make sure to release Tx ring resource
- //NdisReleaseSpinLock(&pAd->TxRingLock);
+ /* Make sure to release Tx ring resource */
+ /*NdisReleaseSpinLock(&pAd->TxRingLock); */
RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
- // Dequeue outgoing frames from TxSwQueue[] and process it
+ /* Dequeue outgoing frames from TxSwQueue[] and process it */
RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
return bReschedule;
{
PTXD_STRUC pTxD;
PNDIS_PACKET pPacket;
-// int i;
+/* int i; */
UCHAR FREE = 0;
PRTMP_MGMT_RING pMgmtRing = &pAd->MgmtRing;
RTMP_SEM_LOCK(&pAd->RxRingLock);
if (*pRxPending == 0) {
- // Get how may packets had been received
+ /* Get how may packets had been received */
RTMP_IO_READ32(pAd, RX_DRX_IDX, &pAd->RxRing.RxDmaIdx);
if (pAd->RxRing.RxSwReadIdx == pAd->RxRing.RxDmaIdx) {
- // no more rx packets
+ /* no more rx packets */
bReschedule = FALSE;
goto done;
}
- // get rx pending count
+ /* get rx pending count */
if (pAd->RxRing.RxDmaIdx > pAd->RxRing.RxSwReadIdx)
*pRxPending =
pAd->RxRing.RxDmaIdx - pAd->RxRing.RxSwReadIdx;
pRxCell = &pAd->RxRing.Cell[pAd->RxRing.RxSwReadIdx];
- // Point to Rx indexed rx ring descriptor
+ /* Point to Rx indexed rx ring descriptor */
pRxD = (PRXD_STRUC) pRxCell->AllocVa;
if (pRxD->DDONE == 0) {
*pRxPending = 0;
- // DMAIndx had done but DDONE bit not ready
+ /* DMAIndx had done but DDONE bit not ready */
bReschedule = TRUE;
goto done;
}
- // return rx descriptor
+ /* return rx descriptor */
NdisMoveMemory(pSaveRxD, pRxD, RXD_SIZE);
pNewPacket =
&AllocVa, &AllocPa);
if (pNewPacket) {
- // unmap the rx buffer
+ /* unmap the rx buffer */
PCI_UNMAP_SINGLE(pAd, pRxCell->DmaBuf.AllocPa,
pRxCell->DmaBuf.AllocSize, PCI_DMA_FROMDEVICE);
pRxPacket = pRxCell->pNdisPacket;
/* update SDP0 to new buffer of rx packet */
pRxD->SDP0 = AllocPa;
} else {
- //DBGPRINT(RT_DEBUG_TRACE,("No Rx Buffer\n"));
+ /*DBGPRINT(RT_DEBUG_TRACE,("No Rx Buffer\n")); */
pRxPacket = NULL;
bReschedule = TRUE;
}
pRxD->DDONE = 0;
- // had handled one rx packet
+ /* had handled one rx packet */
*pRxPending = *pRxPending - 1;
- // update rx descriptor and kick rx
+ /* update rx descriptor and kick rx */
INC_RING_INDEX(pAd->RxRing.RxSwReadIdx, RX_RING_SIZE);
pAd->RxRing.RxCpuIdx =
PHEADER_802_11 pHeader_802_11;
BOOLEAN bAckRequired, bInsertTimestamp;
ULONG SrcBufPA;
- //UCHAR TxBufIdx;
+ /*UCHAR TxBufIdx; */
UCHAR MlmeRate;
ULONG SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
PTXWI_STRUC pFirstTxWI;
- //ULONG i;
- //HTTRANSMIT_SETTING MlmeTransmit; //Rate for this MGMT frame.
+ /*ULONG i; */
+ /*HTTRANSMIT_SETTING MlmeTransmit; //Rate for this MGMT frame. */
ULONG FreeNum;
MAC_TABLE_ENTRY *pMacEntry = NULL;
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
if (pSrcBufVA == NULL) {
- // The buffer shouldn't be NULL
+ /* The buffer shouldn't be NULL */
return NDIS_STATUS_FAILURE;
}
- // Make sure MGMT ring resource won't be used by other threads
- //NdisAcquireSpinLock(&pAd->TxRingLock);
+ /* Make sure MGMT ring resource won't be used by other threads */
+ /*NdisAcquireSpinLock(&pAd->TxRingLock); */
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNum == 0) {
- //NdisReleaseSpinLock(&pAd->TxRingLock);
+ /*NdisReleaseSpinLock(&pAd->TxRingLock); */
return NDIS_STATUS_FAILURE;
}
if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket) {
DBGPRINT(RT_DEBUG_OFF, ("MlmeHardTransmit Error\n"));
- //NdisReleaseSpinLock(&pAd->TxRingLock);
+ /*NdisReleaseSpinLock(&pAd->TxRingLock); */
return NDIS_STATUS_FAILURE;
}
{
- // outgoing frame always wakeup PHY to prevent frame lost
- // if (pAd->StaCfg.Psm == PWR_SAVE)
+ /* outgoing frame always wakeup PHY to prevent frame lost */
+ /* if (pAd->StaCfg.Psm == PWR_SAVE) */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, TRUE);
}
(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL)) {
pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
}
- // Verify Mlme rate for a / g bands.
- if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) // 11A band
+ /* Verify Mlme rate for a / g bands. */
+ if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) /* 11A band */
MlmeRate = RATE_6;
- //
- // Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
- // Snice it's been set to 0 while on MgtMacHeaderInit
- // By the way this will cause frame to be send on PWR_SAVE failed.
- //
- //
- // In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
- // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
+ /* */
+ /* Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE) */
+ /* Snice it's been set to 0 while on MgtMacHeaderInit */
+ /* By the way this will cause frame to be send on PWR_SAVE failed. */
+ /* */
+ /* */
+ /* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
+ /* Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
if (pHeader_802_11->FC.Type != BTYPE_DATA) {
if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_REQ)
|| !(pAd->CommonCfg.bAPSDCapable
}
bInsertTimestamp = FALSE;
- if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
+ if (pHeader_802_11->FC.Type == BTYPE_CNTL) /* must be PS-POLL */
{
bAckRequired = FALSE;
- } else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
+ } else /* BTYPE_MGMT or BTYPE_DATA(must be NULL frame) */
{
- if (pHeader_802_11->Addr1[0] & 0x01) // MULTICAST, BROADCAST
+ if (pHeader_802_11->Addr1[0] & 0x01) /* MULTICAST, BROADCAST */
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
pHeader_802_11->Sequence = pAd->Sequence++;
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
- // Before radar detection done, mgmt frame can not be sent but probe req
- // Because we need to use probe req to trigger driver to send probe req in passive scan
+ /* Before radar detection done, mgmt frame can not be sent but probe req */
+ /* Because we need to use probe req to trigger driver to send probe req in passive scan */
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)) {
DBGPRINT(RT_DEBUG_ERROR,
("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
- //NdisReleaseSpinLock(&pAd->TxRingLock);
+ /*NdisReleaseSpinLock(&pAd->TxRingLock); */
return (NDIS_STATUS_FAILURE);
}
- //
- // fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
- // should always has only one ohysical buffer, and the whole frame size equals
- // to the first scatter buffer size
- //
-
- // Initialize TX Descriptor
- // For inter-frame gap, the number is for this frame and next frame
- // For MLME rate, we will fix as 2Mb to match other vendor's implement
-// pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
-
-// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
- // Only beacon use Nseq=TRUE. So here we use Nseq=FALSE.
+ /* */
+ /* fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET */
+ /* should always has only one ohysical buffer, and the whole frame size equals */
+ /* to the first scatter buffer size */
+ /* */
+
+ /* Initialize TX Descriptor */
+ /* For inter-frame gap, the number is for this frame and next frame */
+ /* For MLME rate, we will fix as 2Mb to match other vendor's implement */
+/* pAd->CommonCfg.MlmeTransmit.field.MODE = 1; */
+
+/* management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not. */
+ /* Only beacon use Nseq=TRUE. So here we use Nseq=FALSE. */
if (pMacEntry == NULL) {
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp,
FALSE, bAckRequired, FALSE, 0, RESERVED_WCID,
pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
-// pFirstTxWI->MPDUtotalByteCount = SrcBufLen - TXWI_SIZE;
+/* pFirstTxWI->MPDUtotalByteCount = SrcBufLen - TXWI_SIZE; */
SrcBufPA =
PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
pAd->RalinkCounters.KickTxCount++;
pAd->RalinkCounters.OneSecTxDoneCount++;
- // Increase TX_CTX_IDX, but write to register later.
+ /* Increase TX_CTX_IDX, but write to register later. */
INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx * 0x10,
pAd->TxRing[QueIdx].TxCpuIdx);
- // Make sure to release MGMT ring resource
-// NdisReleaseSpinLock(&pAd->TxRingLock);
+ /* Make sure to release MGMT ring resource */
+/* NdisReleaseSpinLock(&pAd->TxRingLock); */
return NDIS_STATUS_SUCCESS;
}
IN PTXD_STRUC pTxD,
IN BOOLEAN bWIV, IN UCHAR QueueSEL)
{
- //
- // Always use Long preamble before verifiation short preamble functionality works well.
- // Todo: remove the following line if short preamble functionality works
- //
+ /* */
+ /* Always use Long preamble before verifiation short preamble functionality works well. */
+ /* Todo: remove the following line if short preamble functionality works */
+ /* */
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
pTxD->WIV = (bWIV) ? 1 : 0;
pTxD->QSEL = (QueueSEL);
- //RT2860c?? fixed using EDCA queue for test... We doubt Queue1 has problem. 2006-09-26 Jan
- //pTxD->QSEL= FIFO_EDCA;
+ /*RT2860c?? fixed using EDCA queue for test... We doubt Queue1 has problem. 2006-09-26 Jan */
+ /*pTxD->QSEL= FIFO_EDCA; */
pTxD->DMADONE = 0;
}
IN BOOLEAN bIsLast, OUT USHORT * FreeNumber)
{
- // Dummy function. Should be removed in the future.
+ /* Dummy function. Should be removed in the future. */
return 0;
}
IN UCHAR fragNum, OUT USHORT * FreeNumber)
{
HT_TX_CONTEXT *pHTTXContext;
- USHORT hwHdrLen; // The hwHdrLen consist of 802.11 header length plus the header padding length.
+ USHORT hwHdrLen; /* The hwHdrLen consist of 802.11 header length plus the header padding length. */
UINT32 fillOffset;
TXINFO_STRUC *pTxInfo;
TXWI_STRUC *pTxWI;
UINT32 USBDMApktLen = 0, DMAHdrLen, padding;
BOOLEAN TxQLastRound = FALSE;
- //
- // get Tx Ring Resource & Dma Buffer address
- //
+ /* */
+ /* get Tx Ring Resource & Dma Buffer address */
+ /* */
QueIdx = pTxBlk->QueIdx;
pHTTXContext = &pAd->TxContext[QueIdx];
fillOffset = pHTTXContext->CurWritePosition;
if (fragNum == 0) {
- // Check if we have enough space for this bulk-out batch.
+ /* Check if we have enough space for this bulk-out batch. */
Status = RtmpUSBCanDoWrite(pAd, QueIdx, pHTTXContext);
if (Status == NDIS_STATUS_SUCCESS) {
pHTTXContext->bCurWriting = TRUE;
- // Reserve space for 8 bytes padding.
+ /* Reserve space for 8 bytes padding. */
if ((pHTTXContext->ENextBulkOutPosition ==
pHTTXContext->CurWritePosition)) {
pHTTXContext->ENextBulkOutPosition += 8;
return (Status);
}
} else {
- // For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer.
+ /* For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer. */
Status =
((pHTTXContext->bCurWriting ==
TRUE) ? NDIS_STATUS_SUCCESS : NDIS_STATUS_FAILURE);
pWirelessPacket =
&pHTTXContext->TransferBuffer->field.WirelessPacket[fillOffset];
- // copy TXWI + WLAN Header + LLC into DMA Header Buffer
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+ /* copy TXWI + WLAN Header + LLC into DMA Header Buffer */
+ /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
- // Build our URB for USBD
+ /* Build our URB for USBD */
DMAHdrLen = TXWI_SIZE + hwHdrLen;
USBDMApktLen = DMAHdrLen + pTxBlk->SrcBufLen;
- padding = (4 - (USBDMApktLen % 4)) & 0x03; // round up to 4 byte alignment
+ padding = (4 - (USBDMApktLen % 4)) & 0x03; /* round up to 4 byte alignment */
USBDMApktLen += padding;
pTxBlk->Priv += (TXINFO_SIZE + USBDMApktLen);
- // For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload
+ /* For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload */
RTMPWriteTxInfo(pAd, pTxInfo, (USHORT) (USBDMApktLen), FALSE, FIFO_EDCA,
FALSE /*NextValid */ , FALSE);
NdisMoveMemory(pWirelessPacket, pTxBlk->pSrcBufData, pTxBlk->SrcBufLen);
- // Zero the last padding.
+ /* Zero the last padding. */
pWirelessPacket += pTxBlk->SrcBufLen;
NdisZeroMemory(pWirelessPacket, padding + 8);
if (fragNum == pTxBlk->TotalFragNum) {
RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
- // Update the pHTTXContext->CurWritePosition. 3906 used to prevent the NextBulkOut is a A-RALINK/A-MSDU Frame.
+ /* Update the pHTTXContext->CurWritePosition. 3906 used to prevent the NextBulkOut is a A-RALINK/A-MSDU Frame. */
pHTTXContext->CurWritePosition += pTxBlk->Priv;
if (TxQLastRound == TRUE)
pHTTXContext->CurWritePosition = 8;
pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
- // Finally, set bCurWriting as FALSE
+ /* Finally, set bCurWriting as FALSE */
pHTTXContext->bCurWriting = FALSE;
RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
- // succeed and release the skb buffer
+ /* succeed and release the skb buffer */
RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_SUCCESS);
}
UINT32 USBDMApktLen = 0, DMAHdrLen, padding;
BOOLEAN bTxQLastRound = FALSE;
- // For USB, didn't need PCI_MAP_SINGLE()
- //SrcBufPA = PCI_MAP_SINGLE(pAd, (char *) pTxBlk->pSrcBufData, pTxBlk->SrcBufLen, PCI_DMA_TODEVICE);
+ /* For USB, didn't need PCI_MAP_SINGLE() */
+ /*SrcBufPA = PCI_MAP_SINGLE(pAd, (char *) pTxBlk->pSrcBufData, pTxBlk->SrcBufLen, PCI_DMA_TODEVICE); */
- //
- // get Tx Ring Resource & Dma Buffer address
- //
+ /* */
+ /* get Tx Ring Resource & Dma Buffer address */
+ /* */
QueIdx = pTxBlk->QueIdx;
RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
pHTTXContext = &pAd->TxContext[QueIdx];
fillOffset = pHTTXContext->CurWritePosition;
- // Check ring full.
+ /* Check ring full. */
Status = RtmpUSBCanDoWrite(pAd, QueIdx, pHTTXContext);
if (Status == NDIS_STATUS_SUCCESS) {
pHTTXContext->bCurWriting = TRUE;
pTxInfo = (PTXINFO_STRUC) (&pTxBlk->HeaderBuf[0]);
pTxWI = (PTXWI_STRUC) (&pTxBlk->HeaderBuf[TXINFO_SIZE]);
- // Reserve space for 8 bytes padding.
+ /* Reserve space for 8 bytes padding. */
if ((pHTTXContext->ENextBulkOutPosition ==
pHTTXContext->CurWritePosition)) {
pHTTXContext->ENextBulkOutPosition += 8;
&pHTTXContext->TransferBuffer->field.
WirelessPacket[fillOffset];
- // copy TXWI + WLAN Header + LLC into DMA Header Buffer
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+ /* copy TXWI + WLAN Header + LLC into DMA Header Buffer */
+ /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
- // Build our URB for USBD
+ /* Build our URB for USBD */
DMAHdrLen = TXWI_SIZE + hwHdrLen;
USBDMApktLen = DMAHdrLen + pTxBlk->SrcBufLen;
- padding = (4 - (USBDMApktLen % 4)) & 0x03; // round up to 4 byte alignment
+ padding = (4 - (USBDMApktLen % 4)) & 0x03; /* round up to 4 byte alignment */
USBDMApktLen += padding;
pTxBlk->Priv = (TXINFO_SIZE + USBDMApktLen);
- // For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload
+ /* For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload */
RTMPWriteTxInfo(pAd, pTxInfo, (USHORT) (USBDMApktLen), FALSE,
FIFO_EDCA, FALSE /*NextValid */ , FALSE);
TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
pWirelessPacket += (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
- // We unlock it here to prevent the first 8 bytes maybe over-writed issue.
- // 1. First we got CurWritePosition but the first 8 bytes still not write to the pTxcontext.
- // 2. An interrupt break our routine and handle bulk-out complete.
- // 3. In the bulk-out compllete, it need to do another bulk-out,
- // if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition,
- // but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE.
- // 4. Interrupt complete.
- // 5. Our interrupted routine go back and fill the first 8 bytes to pTxContext.
- // 6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition.
- // and the packet will wrong.
+ /* We unlock it here to prevent the first 8 bytes maybe over-writed issue. */
+ /* 1. First we got CurWritePosition but the first 8 bytes still not write to the pTxcontext. */
+ /* 2. An interrupt break our routine and handle bulk-out complete. */
+ /* 3. In the bulk-out compllete, it need to do another bulk-out, */
+ /* if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition, */
+ /* but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE. */
+ /* 4. Interrupt complete. */
+ /* 5. Our interrupted routine go back and fill the first 8 bytes to pTxContext. */
+ /* 6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition. */
+ /* and the packet will wrong. */
pHTTXContext->CurWriteRealPos +=
(TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
- // succeed and release the skb buffer
+ /* succeed and release the skb buffer */
RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_SUCCESS);
return (Status);
IN UCHAR frameNum, OUT USHORT * FreeNumber)
{
HT_TX_CONTEXT *pHTTXContext;
- USHORT hwHdrLen; // The hwHdrLen consist of 802.11 header length plus the header padding length.
+ USHORT hwHdrLen; /* The hwHdrLen consist of 802.11 header length plus the header padding length. */
UINT32 fillOffset;
TXINFO_STRUC *pTxInfo;
TXWI_STRUC *pTxWI;
UCHAR QueIdx;
NDIS_STATUS Status;
unsigned long IrqFlags;
- //UINT32 USBDMApktLen = 0, DMAHdrLen, padding;
+ /*UINT32 USBDMApktLen = 0, DMAHdrLen, padding; */
- //
- // get Tx Ring Resource & Dma Buffer address
- //
+ /* */
+ /* get Tx Ring Resource & Dma Buffer address */
+ /* */
QueIdx = pTxBlk->QueIdx;
pHTTXContext = &pAd->TxContext[QueIdx];
RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
if (frameNum == 0) {
- // Check if we have enough space for this bulk-out batch.
+ /* Check if we have enough space for this bulk-out batch. */
Status = RtmpUSBCanDoWrite(pAd, QueIdx, pHTTXContext);
if (Status == NDIS_STATUS_SUCCESS) {
pHTTXContext->bCurWriting = TRUE;
pTxInfo = (PTXINFO_STRUC) (&pTxBlk->HeaderBuf[0]);
pTxWI = (PTXWI_STRUC) (&pTxBlk->HeaderBuf[TXINFO_SIZE]);
- // Reserve space for 8 bytes padding.
+ /* Reserve space for 8 bytes padding. */
if ((pHTTXContext->ENextBulkOutPosition ==
pHTTXContext->CurWritePosition)) {
&pHTTXContext->TransferBuffer->field.
WirelessPacket[fillOffset];
- //
- // Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
- //
+ /* */
+ /* Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
+ /* */
if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;
+ /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD; */
hwHdrLen =
pTxBlk->MpduHeaderLen -
LENGTH_AMSDU_SUBFRAMEHEAD +
pTxBlk->HdrPadLen +
LENGTH_AMSDU_SUBFRAMEHEAD;
else if (pTxBlk->TxFrameType == TX_RALINK_FRAME)
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD;
+ /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD; */
hwHdrLen =
pTxBlk->MpduHeaderLen -
LENGTH_ARALINK_HEADER_FIELD +
pTxBlk->HdrPadLen +
LENGTH_ARALINK_HEADER_FIELD;
else
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+ /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
hwHdrLen =
pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
- // Update the pTxBlk->Priv.
+ /* Update the pTxBlk->Priv. */
pTxBlk->Priv = TXINFO_SIZE + TXWI_SIZE + hwHdrLen;
- // pTxInfo->USBDMApktLen now just a temp value and will to correct latter.
+ /* pTxInfo->USBDMApktLen now just a temp value and will to correct latter. */
RTMPWriteTxInfo(pAd, pTxInfo, (USHORT) (pTxBlk->Priv),
FALSE, FIFO_EDCA, FALSE /*NextValid */ ,
FALSE);
- // Copy it.
+ /* Copy it. */
NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf,
pTxBlk->Priv);
pHTTXContext->CurWriteRealPos += pTxBlk->Priv;
pWirelessPacket += pTxBlk->Priv;
}
- } else { // For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer.
+ } else { /* For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer. */
Status =
((pHTTXContext->bCurWriting ==
&pHTTXContext->TransferBuffer->field.
WirelessPacket[fillOffset];
- //hwHdrLen = pTxBlk->MpduHeaderLen;
+ /*hwHdrLen = pTxBlk->MpduHeaderLen; */
NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf,
pTxBlk->MpduHeaderLen);
pWirelessPacket += (pTxBlk->MpduHeaderLen);
pTxBlk->Priv += pTxBlk->MpduHeaderLen;
- } else { // It should not happened now unless we are going to shutdown.
+ } else { /* It should not happened now unless we are going to shutdown. */
DBGPRINT(RT_DEBUG_ERROR,
("WriteMultiTxResource():bCurWriting is FALSE when handle sub-sequent frames.\n"));
Status = NDIS_STATUS_FAILURE;
}
}
- // We unlock it here to prevent the first 8 bytes maybe over-write issue.
- // 1. First we got CurWritePosition but the first 8 bytes still not write to the pTxContext.
- // 2. An interrupt break our routine and handle bulk-out complete.
- // 3. In the bulk-out compllete, it need to do another bulk-out,
- // if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition,
- // but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE.
- // 4. Interrupt complete.
- // 5. Our interrupted routine go back and fill the first 8 bytes to pTxContext.
- // 6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition.
- // and the packet will wrong.
+ /* We unlock it here to prevent the first 8 bytes maybe over-write issue. */
+ /* 1. First we got CurWritePosition but the first 8 bytes still not write to the pTxContext. */
+ /* 2. An interrupt break our routine and handle bulk-out complete. */
+ /* 3. In the bulk-out compllete, it need to do another bulk-out, */
+ /* if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition, */
+ /* but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE. */
+ /* 4. Interrupt complete. */
+ /* 5. Our interrupted routine go back and fill the first 8 bytes to pTxContext. */
+ /* 6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition. */
+ /* and the packet will wrong. */
RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
if (Status != NDIS_STATUS_SUCCESS) {
pHTTXContext->NextBulkOutPosition));
goto done;
}
- // Copy the frame content into DMA buffer and update the pTxBlk->Priv
+ /* Copy the frame content into DMA buffer and update the pTxBlk->Priv */
NdisMoveMemory(pWirelessPacket, pTxBlk->pSrcBufData, pTxBlk->SrcBufLen);
pWirelessPacket += pTxBlk->SrcBufLen;
pTxBlk->Priv += pTxBlk->SrcBufLen;
done:
- // Release the skb buffer here
+ /* Release the skb buffer here */
RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_SUCCESS);
return (Status);
(PUCHAR) (&pHTTXContext->TransferBuffer->field.
WirelessPacket[fillOffset]);
- //
- // Update TxInfo->USBDMApktLen ,
- // the length = TXWI_SIZE + 802.11_hdr + 802.11_hdr_pad + payload_of_all_batch_frames + Bulk-Out-padding
- //
+ /* */
+ /* Update TxInfo->USBDMApktLen , */
+ /* the length = TXWI_SIZE + 802.11_hdr + 802.11_hdr_pad + payload_of_all_batch_frames + Bulk-Out-padding */
+ /* */
pTxInfo = (PTXINFO_STRUC) (pWirelessPacket);
- // Calculate the bulk-out padding
+ /* Calculate the bulk-out padding */
USBDMApktLen = pTxBlk->Priv - TXINFO_SIZE;
- padding = (4 - (USBDMApktLen % 4)) & 0x03; // round up to 4 byte alignment
+ padding = (4 - (USBDMApktLen % 4)) & 0x03; /* round up to 4 byte alignment */
USBDMApktLen += padding;
pTxInfo->USBDMATxPktLen = USBDMApktLen;
- //
- // Update TXWI->MPDUtotalByteCount ,
- // the length = 802.11 header + payload_of_all_batch_frames
+ /* */
+ /* Update TXWI->MPDUtotalByteCount , */
+ /* the length = 802.11 header + payload_of_all_batch_frames */
pTxWI = (PTXWI_STRUC) (pWirelessPacket + TXINFO_SIZE);
pTxWI->MPDUtotalByteCount = totalMPDUSize;
- //
- // Update the pHTTXContext->CurWritePosition
- //
+ /* */
+ /* Update the pHTTXContext->CurWritePosition */
+ /* */
pHTTXContext->CurWritePosition += (TXINFO_SIZE + USBDMApktLen);
- if ((pHTTXContext->CurWritePosition + 3906) > MAX_TXBULK_LIMIT) { // Add 3906 for prevent the NextBulkOut packet size is a A-RALINK/A-MSDU Frame.
+ if ((pHTTXContext->CurWritePosition + 3906) > MAX_TXBULK_LIMIT) { /* Add 3906 for prevent the NextBulkOut packet size is a A-RALINK/A-MSDU Frame. */
pHTTXContext->CurWritePosition = 8;
pTxInfo->SwUseLastRound = 1;
}
pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
- //
- // Zero the last padding.
- //
+ /* */
+ /* Zero the last padding. */
+ /* */
pWirelessPacket =
(&pHTTXContext->TransferBuffer->field.
WirelessPacket[fillOffset + pTxBlk->Priv]);
NdisZeroMemory(pWirelessPacket, padding + 8);
- // Finally, set bCurWriting as FALSE
+ /* Finally, set bCurWriting as FALSE */
pHTTXContext->bCurWriting = FALSE;
- } else { // It should not happened now unless we are going to shutdown.
+ } else { /* It should not happened now unless we are going to shutdown. */
DBGPRINT(RT_DEBUG_ERROR,
("FinalWriteTxResource():bCurWriting is FALSE when handle last frames.\n"));
}
VOID RtmpUSBDataLastTxIdx(IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx, IN USHORT TxIdx)
{
- // DO nothing for USB.
+ /* DO nothing for USB. */
}
/*
pTxInfo = (PTXINFO_STRUC) (pSrcBufVA);
- // Build our URB for USBD
+ /* Build our URB for USBD */
BulkOutSize = SrcBufLen;
BulkOutSize = (BulkOutSize + 3) & (~3);
RTMPWriteTxInfo(pAd, pTxInfo, (USHORT) (BulkOutSize - TXINFO_SIZE),
TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
- BulkOutSize += 4; // Always add 4 extra bytes at every packet.
+ BulkOutSize += 4; /* Always add 4 extra bytes at every packet. */
- // If BulkOutSize is multiple of BulkOutMaxPacketSize, add extra 4 bytes again.
+ /* If BulkOutSize is multiple of BulkOutMaxPacketSize, add extra 4 bytes again. */
if ((BulkOutSize % pAd->BulkOutMaxPacketSize) == 0)
BulkOutSize += 4;
padLen = BulkOutSize - SrcBufLen;
ASSERT((padLen <= RTMP_PKT_TAIL_PADDING));
- // Now memzero all extra padding bytes.
+ /* Now memzero all extra padding bytes. */
pDest = (PUCHAR) (pSrcBufVA + SrcBufLen);
skb_put(GET_OS_PKT_TYPE(pPacket), padLen);
NdisZeroMemory(pDest, padLen);
pMLMEContext->TransferBuffer =
(PTX_BUFFER) (GET_OS_PKT_DATAPTR(pPacket));
- // Length in TxInfo should be 8 less than bulkout size.
+ /* Length in TxInfo should be 8 less than bulkout size. */
pMLMEContext->BulkOutSize = BulkOutSize;
pMLMEContext->InUse = TRUE;
pMLMEContext->bWaitingBulkOut = TRUE;
- //for debug
- //hex_dump("RtmpUSBMgmtKickOut", &pMLMEContext->TransferBuffer->field.WirelessPacket[0], (pMLMEContext->BulkOutSize > 16 ? 16 : pMLMEContext->BulkOutSize));
+ /*for debug */
+ /*hex_dump("RtmpUSBMgmtKickOut", &pMLMEContext->TransferBuffer->field.WirelessPacket[0], (pMLMEContext->BulkOutSize > 16 ? 16 : pMLMEContext->BulkOutSize)); */
- //pAd->RalinkCounters.KickTxCount++;
- //pAd->RalinkCounters.OneSecTxDoneCount++;
+ /*pAd->RalinkCounters.KickTxCount++; */
+ /*pAd->RalinkCounters.OneSecTxDoneCount++; */
- //if (pAd->MgmtRing.TxSwFreeIdx == MGMT_RING_SIZE)
- // needKickOut = TRUE;
+ /*if (pAd->MgmtRing.TxSwFreeIdx == MGMT_RING_SIZE) */
+ /* needKickOut = TRUE; */
- // Decrease the TxSwFreeIdx and Increase the TX_CTX_IDX
+ /* Decrease the TxSwFreeIdx and Increase the TX_CTX_IDX */
pAd->MgmtRing.TxSwFreeIdx--;
INC_RING_INDEX(pAd->MgmtRing.TxCpuIdx, MGMT_RING_SIZE);
RTMP_IRQ_UNLOCK(&pAd->MLMEBulkOutLock, IrqFlags);
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
- //if (needKickOut)
+ /*if (needKickOut) */
RTUSBKickBulkOut(pAd);
return 0;
pNullContext = &(pAd->NullContext);
- // Set the in use bit
+ /* Set the in use bit */
pNullContext->InUse = TRUE;
pWirelessPkt =
(PUCHAR) & pNullContext->TransferBuffer->field.
pAd->NullContext.BulkOutSize =
TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
- // Fill out frame length information for global Bulk out arbitor
- //pNullContext->BulkOutSize = TransferBufferLength;
+ /* Fill out frame length information for global Bulk out arbitor */
+ /*pNullContext->BulkOutSize = TransferBufferLength; */
DBGPRINT(RT_DEBUG_TRACE,
("SYNC - send NULL Frame @%d Mbps...\n",
RateIdToMbps[pAd->CommonCfg.TxRate]));
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
- // Kick bulk out
+ /* Kick bulk out */
RTUSBKickBulkOut(pAd);
}
}
pData = &pRxContext->TransferBuffer[pAd->ReadPosition]; /* 4KB */
- // The RXDMA field is 4 bytes, now just use the first 2 bytes. The Length including the (RXWI + MSDU + Padding)
+ /* The RXDMA field is 4 bytes, now just use the first 2 bytes. The Length including the (RXWI + MSDU + Padding) */
ThisFrameLen = *pData + (*(pData + 1) << 8);
if (ThisFrameLen == 0) {
DBGPRINT(RT_DEBUG_TRACE,
goto label_null;
}
- if ((ThisFrameLen + 8) > RxBufferLength) // 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC))
+ if ((ThisFrameLen + 8) > RxBufferLength) /* 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC)) */
{
DBGPRINT(RT_DEBUG_TRACE,
("BIRIdx(%d):FrameLen(0x%lx) outranges. BulkInLen=0x%lx, remaining RxBufLen=0x%lx, ReadPos=0x%lx\n",
pRxContext->BulkInOffset, RxBufferLength,
pAd->ReadPosition));
- // error frame. finish this loop
+ /* error frame. finish this loop */
goto label_null;
}
- // skip USB frame length field
+ /* skip USB frame length field */
pData += RT2870_RXDMALEN_FIELD_SIZE;
pRxWI = (PRXWI_STRUC) pData;
if (pRxWI->MPDUtotalByteCount > ThisFrameLen) {
ThisFrameLen));
goto label_null;
}
- // allocate a rx packet
+ /* allocate a rx packet */
pSkb = dev_alloc_skb(ThisFrameLen);
if (pSkb == NULL) {
DBGPRINT(RT_DEBUG_ERROR,
__FUNCTION__));
goto label_null;
}
- // copy the rx packet
+ /* copy the rx packet */
memcpy(skb_put(pSkb, ThisFrameLen), pData, ThisFrameLen);
RTPKT_TO_OSPKT(pSkb)->dev = get_netdev_from_bssid(pAd, BSS0);
RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pSkb), PKTSRC_NDIS);
- // copy RxD
+ /* copy RxD */
*pSaveRxD = *(PRXINFO_STRUC) (pData + ThisFrameLen);
- // update next packet read position.
- pAd->ReadPosition += (ThisFrameLen + RT2870_RXDMALEN_FIELD_SIZE + RXINFO_SIZE); // 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC))
+ /* update next packet read position. */
+ pAd->ReadPosition += (ThisFrameLen + RT2870_RXDMALEN_FIELD_SIZE + RXINFO_SIZE); /* 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC)) */
return pSkb;
if (pRxINFO == NULL)
return (NDIS_STATUS_FAILURE);
- // Phy errors & CRC errors
+ /* Phy errors & CRC errors */
if (pRxINFO->Crc) {
- // Check RSSI for Noise Hist statistic collection.
+ /* Check RSSI for Noise Hist statistic collection. */
dBm = (INT) (pRxWI->RSSI0) - pAd->BbpRssiToDbmDelta;
if (dBm <= -87)
pAd->StaCfg.RPIDensity[0] += 1;
return (NDIS_STATUS_FAILURE);
}
- // Add Rx size to channel load counter, we should ignore error counts
+ /* Add Rx size to channel load counter, we should ignore error counts */
pAd->StaCfg.CLBusyBytes += (pRxWI->MPDUtotalByteCount + 14);
- // Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics
+ /* Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics */
if (pHeader->FC.ToDs) {
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Err;FC.ToDs\n"));
return NDIS_STATUS_FAILURE;
}
- // Paul 04-03 for OFDM Rx length issue
+ /* Paul 04-03 for OFDM Rx length issue */
if (pRxWI->MPDUtotalByteCount > MAX_AGGREGATION_SIZE) {
DBGPRINT_RAW(RT_DEBUG_ERROR, ("received packet too long\n"));
return NDIS_STATUS_FAILURE;
}
- // Drop not U2M frames, cant's drop here because we will drop beacon in this case
- // I am kind of doubting the U2M bit operation
- // if (pRxD->U2M == 0)
- // return(NDIS_STATUS_FAILURE);
+ /* Drop not U2M frames, cant's drop here because we will drop beacon in this case */
+ /* I am kind of doubting the U2M bit operation */
+ /* if (pRxD->U2M == 0) */
+ /* return(NDIS_STATUS_FAILURE); */
- // drop decyption fail frame
+ /* drop decyption fail frame */
if (pRxINFO->Decrypted && pRxINFO->CipherErr) {
if (((pRxINFO->CipherErr & 1) == 1)
RTMPSendWirelessEvent(pAd, IW_MIC_ERROR_EVENT_FLAG,
pAd->MacTab.Content[BSSID_WCID].
Addr, BSS0, 0);
- //
- // MIC Error
- //
+ /* */
+ /* MIC Error */
+ /* */
if ((pRxINFO->CipherErr == 2) && pRxINFO->MyBss) {
pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex];
RTMPReportMicError(pAd, pWpaKey);
(pAd->SharedKey[BSS0][pRxWI->KeyIndex].CipherAlg ==
CIPHER_AES)
&& (pHeader->Sequence == pAd->FragFrame.Sequence)) {
- //
- // Acceptable since the First FragFrame no CipherErr problem.
- //
+ /* */
+ /* Acceptable since the First FragFrame no CipherErr problem. */
+ /* */
return (NDIS_STATUS_SUCCESS);
}
IN USHORT TbttNumToNextWakeUp)
{
- // we have decided to SLEEP, so at least do it for a BEACON period.
+ /* we have decided to SLEEP, so at least do it for a BEACON period. */
if (TbttNumToNextWakeUp == 0)
TbttNumToNextWakeUp = 1;
RTMPSetTimer(&pAd->Mlme.AutoWakeupTimer, AUTO_WAKEUP_TIMEOUT);
pAd->Mlme.AutoWakeupTimerRunning = TRUE;
- AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02); // send POWER-SAVE command to MCU. Timeout 40us.
+ AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02); /* send POWER-SAVE command to MCU. Timeout 40us. */
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
memset(&aryRates, 0x00, sizeof(NDIS_802_11_RATES));
switch (pAdapter->CommonCfg.PhyMode) {
- case PHY_11A: // A only
+ case PHY_11A: /* A only */
switch (Rates) {
- case 6000000: //6M
- aryRates[0] = 0x0c; // 6M
+ case 6000000: /*6M */
+ aryRates[0] = 0x0c; /* 6M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_0;
break;
- case 9000000: //9M
- aryRates[0] = 0x12; // 9M
+ case 9000000: /*9M */
+ aryRates[0] = 0x12; /* 9M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_1;
break;
- case 12000000: //12M
- aryRates[0] = 0x18; // 12M
+ case 12000000: /*12M */
+ aryRates[0] = 0x18; /* 12M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_2;
break;
- case 18000000: //18M
- aryRates[0] = 0x24; // 18M
+ case 18000000: /*18M */
+ aryRates[0] = 0x24; /* 18M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_3;
break;
- case 24000000: //24M
- aryRates[0] = 0x30; // 24M
+ case 24000000: /*24M */
+ aryRates[0] = 0x30; /* 24M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_4;
break;
- case 36000000: //36M
- aryRates[0] = 0x48; // 36M
+ case 36000000: /*36M */
+ aryRates[0] = 0x48; /* 36M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_5;
break;
- case 48000000: //48M
- aryRates[0] = 0x60; // 48M
+ case 48000000: /*48M */
+ aryRates[0] = 0x60; /* 48M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_6;
break;
- case 54000000: //54M
- aryRates[0] = 0x6c; // 54M
+ case 54000000: /*54M */
+ aryRates[0] = 0x6c; /* 54M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_7;
break;
- case -1: //Auto
+ case -1: /*Auto */
default:
- aryRates[0] = 0x6c; // 54Mbps
- aryRates[1] = 0x60; // 48Mbps
- aryRates[2] = 0x48; // 36Mbps
- aryRates[3] = 0x30; // 24Mbps
- aryRates[4] = 0x24; // 18M
- aryRates[5] = 0x18; // 12M
- aryRates[6] = 0x12; // 9M
- aryRates[7] = 0x0c; // 6M
+ aryRates[0] = 0x6c; /* 54Mbps */
+ aryRates[1] = 0x60; /* 48Mbps */
+ aryRates[2] = 0x48; /* 36Mbps */
+ aryRates[3] = 0x30; /* 24Mbps */
+ aryRates[4] = 0x24; /* 18M */
+ aryRates[5] = 0x18; /* 12M */
+ aryRates[6] = 0x12; /* 9M */
+ aryRates[7] = 0x0c; /* 6M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_AUTO;
break;
}
break;
- case PHY_11BG_MIXED: // B/G Mixed
- case PHY_11B: // B only
- case PHY_11ABG_MIXED: // A/B/G Mixed
+ case PHY_11BG_MIXED: /* B/G Mixed */
+ case PHY_11B: /* B only */
+ case PHY_11ABG_MIXED: /* A/B/G Mixed */
default:
switch (Rates) {
- case 1000000: //1M
+ case 1000000: /*1M */
aryRates[0] = 0x02;
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_0;
break;
- case 2000000: //2M
+ case 2000000: /*2M */
aryRates[0] = 0x04;
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_1;
break;
- case 5000000: //5.5M
- aryRates[0] = 0x0b; // 5.5M
+ case 5000000: /*5.5M */
+ aryRates[0] = 0x0b; /* 5.5M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_2;
break;
- case 11000000: //11M
- aryRates[0] = 0x16; // 11M
+ case 11000000: /*11M */
+ aryRates[0] = 0x16; /* 11M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_3;
break;
- case 6000000: //6M
- aryRates[0] = 0x0c; // 6M
+ case 6000000: /*6M */
+ aryRates[0] = 0x0c; /* 6M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_0;
break;
- case 9000000: //9M
- aryRates[0] = 0x12; // 9M
+ case 9000000: /*9M */
+ aryRates[0] = 0x12; /* 9M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_1;
break;
- case 12000000: //12M
- aryRates[0] = 0x18; // 12M
+ case 12000000: /*12M */
+ aryRates[0] = 0x18; /* 12M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_2;
break;
- case 18000000: //18M
- aryRates[0] = 0x24; // 18M
+ case 18000000: /*18M */
+ aryRates[0] = 0x24; /* 18M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_3;
break;
- case 24000000: //24M
- aryRates[0] = 0x30; // 24M
+ case 24000000: /*24M */
+ aryRates[0] = 0x30; /* 24M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_4;
break;
- case 36000000: //36M
- aryRates[0] = 0x48; // 36M
+ case 36000000: /*36M */
+ aryRates[0] = 0x48; /* 36M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_5;
break;
- case 48000000: //48M
- aryRates[0] = 0x60; // 48M
+ case 48000000: /*48M */
+ aryRates[0] = 0x60; /* 48M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_6;
break;
- case 54000000: //54M
- aryRates[0] = 0x6c; // 54M
+ case 54000000: /*54M */
+ aryRates[0] = 0x6c; /* 54M */
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_7;
break;
- case -1: //Auto
+ case -1: /*Auto */
default:
- if (pAdapter->CommonCfg.PhyMode == PHY_11B) { //B Only
- aryRates[0] = 0x16; // 11Mbps
- aryRates[1] = 0x0b; // 5.5Mbps
- aryRates[2] = 0x04; // 2Mbps
- aryRates[3] = 0x02; // 1Mbps
- } else { //(B/G) Mixed or (A/B/G) Mixed
- aryRates[0] = 0x6c; // 54Mbps
- aryRates[1] = 0x60; // 48Mbps
- aryRates[2] = 0x48; // 36Mbps
- aryRates[3] = 0x30; // 24Mbps
- aryRates[4] = 0x16; // 11Mbps
- aryRates[5] = 0x0b; // 5.5Mbps
- aryRates[6] = 0x04; // 2Mbps
- aryRates[7] = 0x02; // 1Mbps
+ if (pAdapter->CommonCfg.PhyMode == PHY_11B) { /*B Only */
+ aryRates[0] = 0x16; /* 11Mbps */
+ aryRates[1] = 0x0b; /* 5.5Mbps */
+ aryRates[2] = 0x04; /* 2Mbps */
+ aryRates[3] = 0x02; /* 1Mbps */
+ } else { /*(B/G) Mixed or (A/B/G) Mixed */
+ aryRates[0] = 0x6c; /* 54Mbps */
+ aryRates[1] = 0x60; /* 48Mbps */
+ aryRates[2] = 0x48; /* 36Mbps */
+ aryRates[3] = 0x30; /* 24Mbps */
+ aryRates[4] = 0x16; /* 11Mbps */
+ aryRates[5] = 0x0b; /* 5.5Mbps */
+ aryRates[6] = 0x04; /* 2Mbps */
+ aryRates[7] = 0x02; /* 1Mbps */
}
pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
MCS_AUTO;
pAdapter->CommonCfg.DesireRate[5],
pAdapter->CommonCfg.DesireRate[6],
pAdapter->CommonCfg.DesireRate[7]));
- // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
+ /* Changing DesiredRate may affect the MAX TX rate we used to TX frames out */
MlmeUpdateTxRates(pAdapter, FALSE, 0);
}
("RTMPWPARemoveAllKeys(AuthMode=%d, WepStatus=%d)\n",
pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus));
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
- // For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after
- // Link up. And it will be replaced if user changed it.
+ /* For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after */
+ /* Link up. And it will be replaced if user changed it. */
if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
return;
- // For WPA-None, there is no need to remove it, since WinXP won't set it again after
- // Link up. And it will be replaced if user changed it.
+ /* For WPA-None, there is no need to remove it, since WinXP won't set it again after */
+ /* Link up. And it will be replaced if user changed it. */
if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
return;
- // set BSSID wcid entry of the Pair-wise Key table as no-security mode
+ /* set BSSID wcid entry of the Pair-wise Key table as no-security mode */
AsicRemovePairwiseKeyEntry(pAd, BSS0, BSSID_WCID);
- // set all shared key mode as no-security.
+ /* set all shared key mode as no-security. */
for (i = 0; i < SHARE_KEY_NUM; i++) {
DBGPRINT(RT_DEBUG_TRACE,
("remove %s key #%d\n",
VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode)
{
INT i;
- // the selected phymode must be supported by the RF IC encoded in E2PROM
+ /* the selected phymode must be supported by the RF IC encoded in E2PROM */
- // if no change, do nothing
+ /* if no change, do nothing */
/* bug fix
if (pAd->CommonCfg.PhyMode == phymode)
return;
BuildChannelList(pAd);
- // sanity check user setting
+ /* sanity check user setting */
for (i = 0; i < pAd->ChannelListNum; i++) {
if (pAd->CommonCfg.Channel == pAd->ChannelList[i].Channel)
break;
NdisZeroMemory(pAd->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
switch (phymode) {
case PHY_11B:
- pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[0] = 0x82; /* 1 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[1] = 0x84; /* 2 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[2] = 0x8B; /* 5.5 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[3] = 0x96; /* 11 mbps, in units of 0.5 Mbps, basic rate */
pAd->CommonCfg.SupRateLen = 4;
pAd->CommonCfg.ExtRateLen = 0;
- pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps
- //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use
+ pAd->CommonCfg.DesireRate[0] = 2; /* 1 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[1] = 4; /* 2 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[2] = 11; /* 5.5 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[3] = 22; /* 11 mbps, in units of 0.5 Mbps */
+ /*pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use */
break;
case PHY_11G:
case PHY_11ABGN_MIXED:
case PHY_11BGN_MIXED:
case PHY_11GN_MIXED:
- pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[4] = 0x12; // 9 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[5] = 0x24; // 18 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[6] = 0x48; // 36 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[0] = 0x82; /* 1 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[1] = 0x84; /* 2 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[2] = 0x8B; /* 5.5 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[3] = 0x96; /* 11 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[4] = 0x12; /* 9 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.SupRate[5] = 0x24; /* 18 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.SupRate[6] = 0x48; /* 36 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.SupRate[7] = 0x6c; /* 54 mbps, in units of 0.5 Mbps */
pAd->CommonCfg.SupRateLen = 8;
- pAd->CommonCfg.ExtRate[0] = 0x0C; // 6 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.ExtRate[1] = 0x18; // 12 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.ExtRate[2] = 0x30; // 24 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.ExtRate[3] = 0x60; // 48 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.ExtRate[0] = 0x0C; /* 6 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.ExtRate[1] = 0x18; /* 12 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.ExtRate[2] = 0x30; /* 24 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.ExtRate[3] = 0x60; /* 48 mbps, in units of 0.5 Mbps */
pAd->CommonCfg.ExtRateLen = 4;
- pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[4] = 12; // 6 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[5] = 18; // 9 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[6] = 24; // 12 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[7] = 36; // 18 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[8] = 48; // 24 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[9] = 72; // 36 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[10] = 96; // 48 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[11] = 108; // 54 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[0] = 2; /* 1 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[1] = 4; /* 2 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[2] = 11; /* 5.5 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[3] = 22; /* 11 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[4] = 12; /* 6 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[5] = 18; /* 9 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[6] = 24; /* 12 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[7] = 36; /* 18 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[8] = 48; /* 24 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[9] = 72; /* 36 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[10] = 96; /* 48 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[11] = 108; /* 54 mbps, in units of 0.5 Mbps */
break;
case PHY_11A:
case PHY_11AN_MIXED:
case PHY_11AGN_MIXED:
case PHY_11N_5G:
- pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[4] = 0xb0; // 24 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[0] = 0x8C; /* 6 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[1] = 0x12; /* 9 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.SupRate[2] = 0x98; /* 12 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[3] = 0x24; /* 18 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.SupRate[4] = 0xb0; /* 24 mbps, in units of 0.5 Mbps, basic rate */
+ pAd->CommonCfg.SupRate[5] = 0x48; /* 36 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.SupRate[6] = 0x60; /* 48 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.SupRate[7] = 0x6c; /* 54 mbps, in units of 0.5 Mbps */
pAd->CommonCfg.SupRateLen = 8;
pAd->CommonCfg.ExtRateLen = 0;
- pAd->CommonCfg.DesireRate[0] = 12; // 6 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[1] = 18; // 9 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[2] = 24; // 12 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[3] = 36; // 18 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[4] = 48; // 24 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[5] = 72; // 36 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[6] = 96; // 48 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[7] = 108; // 54 mbps, in units of 0.5 Mbps
- //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use
+ pAd->CommonCfg.DesireRate[0] = 12; /* 6 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[1] = 18; /* 9 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[2] = 24; /* 12 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[3] = 36; /* 18 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[4] = 48; /* 24 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[5] = 72; /* 36 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[6] = 96; /* 48 mbps, in units of 0.5 Mbps */
+ pAd->CommonCfg.DesireRate[7] = 108; /* 54 mbps, in units of 0.5 Mbps */
+ /*pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use */
break;
default:
*/
VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
{
- //ULONG *pmcs;
+ /*ULONG *pmcs; */
UINT32 Value = 0;
UCHAR BBPValue = 0;
UCHAR BBP3Value = 0;
pHTPhyMode->HtMode, pHTPhyMode->ExtOffset, pHTPhyMode->MCS,
pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
- // Don't zero supportedHyPhy structure.
+ /* Don't zero supportedHyPhy structure. */
RTMPZeroMemory(&pAd->CommonCfg.HtCapability,
sizeof(pAd->CommonCfg.HtCapability));
RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo,
("RTMPSetHT : RxBAWinLimit = %d\n",
pAd->CommonCfg.BACapability.field.RxBAWinLimit));
- // Mimo power save, A-MSDU size,
+ /* Mimo power save, A-MSDU size, */
pAd->CommonCfg.DesiredHtPhy.AmsduEnable =
(USHORT) pAd->CommonCfg.BACapability.field.AmsduEnable;
pAd->CommonCfg.DesiredHtPhy.AmsduSize =
} else
pAd->CommonCfg.DesiredHtPhy.GF = 0;
- // Decide Rx MCSSet
+ /* Decide Rx MCSSet */
switch (RxStream) {
case 1:
pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
break;
- case 3: // 3*3
+ case 3: /* 3*3 */
pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
pAd->CommonCfg.HtCapability.MCSSet[2] = 0xff;
}
if (pHTPhyMode->BW == BW_40) {
- pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1; // MCS 32
+ pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1; /* MCS 32 */
pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 1;
if (pAd->CommonCfg.Channel <= 14)
pAd->CommonCfg.HtCapability.HtCapInfo.CCKmodein40 = 1;
pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset =
(pHTPhyMode->ExtOffset ==
EXTCHA_BELOW) ? (EXTCHA_BELOW) : EXTCHA_ABOVE;
- // Set Regsiter for extension channel position.
+ /* Set Regsiter for extension channel position. */
RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBP3Value);
if ((pHTPhyMode->ExtOffset == EXTCHA_BELOW)) {
BBP3Value &= (~0x20);
RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
}
- // Turn on BBP 40MHz mode now only as AP .
- // Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection.
+ /* Turn on BBP 40MHz mode now only as AP . */
+ /* Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection. */
if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd)
) {
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE;
pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
- // Turn on BBP 20MHz mode by request here.
+ /* Turn on BBP 20MHz mode by request here. */
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
BBPValue &= (~0x18);
pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 0;
}
- // We support link adaptation for unsolicit MCS feedback, set to 2.
- pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE; //MCSFBK_UNSOLICIT;
+ /* We support link adaptation for unsolicit MCS feedback, set to 2. */
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE; /*MCSFBK_UNSOLICIT; */
pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel;
- // 1, the extension channel above the control channel.
+ /* 1, the extension channel above the control channel. */
- // EDCA parameters used for AP's own transmission
+ /* EDCA parameters used for AP's own transmission */
if (pAd->CommonCfg.APEdcaParm.bValid == FALSE) {
pAd->CommonCfg.APEdcaParm.bValid = TRUE;
pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
DesiredMcs =
pAd->StaCfg.DesiredTransmitSetting.field.MCS;
- //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
+ /*pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE; */
break;
}
} while (FALSE);
DBGPRINT(RT_DEBUG_TRACE,
("RTMPSetIndividualHT : Desired MCS = %d\n", DesiredMcs));
- // Check the validity of MCS
+ /* Check the validity of MCS */
if ((TxStream == 1)
&& ((DesiredMcs >= MCS_8) && (DesiredMcs <= MCS_15))) {
DBGPRINT(RT_DEBUG_WARN,
pDesired_ht_phy->bHtEnable = TRUE;
- // Decide desired Tx MCS
+ /* Decide desired Tx MCS */
switch (TxStream) {
case 1:
if (DesiredMcs == MCS_AUTO) {
}
break;
- case 3: // 3*3
+ case 3: /* 3*3 */
if (DesiredMcs == MCS_AUTO) {
/* MCS0 ~ MCS23, 3 bytes */
pDesired_ht_phy->MCSSet[0] = 0xff;
if (DesiredMcs == MCS_AUTO || DesiredMcs == MCS_32)
pDesired_ht_phy->MCSSet[4] = 0x1;
}
- // update HT Rate setting
+ /* update HT Rate setting */
if (pAd->OpMode == OPMODE_STA)
MlmeUpdateHtTxRates(pAd, BSS0);
else
pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth;
pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode;
pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent;
- RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet */ pMcsSet, 4); // rt2860 only support MCS max=32, no need to copy all 16 uchar.
+ RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet */ pMcsSet, 4); /* rt2860 only support MCS max=32, no need to copy all 16 uchar. */
DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateHTIE <== \n"));
}
BssIdx));
return;
}
- // 1. In ADHOC mode, the AID is wcid number. And NO mesh link exists.
- // 2. In Infra mode, the AID:1 MUST be wcid of infra STA.
- // the AID:2~ assign to mesh link entry.
+ /* 1. In ADHOC mode, the AID is wcid number. And NO mesh link exists. */
+ /* 2. In Infra mode, the AID:1 MUST be wcid of infra STA. */
+ /* the AID:2~ assign to mesh link entry. */
if (pEntry)
Wcid = pEntry->Aid;
else
}
}
- // Update WCID attribute table
+ /* Update WCID attribute table */
offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
{
RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
- // Update IV/EIV table
+ /* Update IV/EIV table */
offset = MAC_IVEIV_TABLE_BASE + (Wcid * HW_IVEIV_ENTRY_SIZE);
- // WPA mode
+ /* WPA mode */
if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC)
|| (CipherAlg == CIPHER_AES)) {
- // Eiv bit on. keyid always is 0 for pairwise key
+ /* Eiv bit on. keyid always is 0 for pairwise key */
IVEIV = (KeyIdx << 6) | 0x20;
} else {
- // WEP KeyIdx is default tx key.
+ /* WEP KeyIdx is default tx key. */
IVEIV = (KeyIdx << 6);
}
- // For key index and ext IV bit, so only need to update the position(offset+3).
+ /* For key index and ext IV bit, so only need to update the position(offset+3). */
#ifdef RTMP_MAC_PCI
RTMP_IO_WRITE8(pAd, offset + 3, IVEIV);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
RTUSBMultiWrite_OneByte(pAd, offset + 3, &IVEIV);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
DBGPRINT(RT_DEBUG_TRACE,
("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",
PRTMP_TX_RING pTxRing;
PRTMP_DMABUF pDmaBuf;
PNDIS_PACKET pPacket;
-// PRTMP_REORDERBUF pReorderBuf;
+/* PRTMP_REORDERBUF pReorderBuf; */
DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPAllocTxRxRingMemory\n"));
do {
- //
- // Allocate all ring descriptors, include TxD, RxD, MgmtD.
- // Although each size is different, to prevent cacheline and alignment
- // issue, I intentional set them all to 64 bytes.
- //
+ /* */
+ /* Allocate all ring descriptors, include TxD, RxD, MgmtD. */
+ /* Although each size is different, to prevent cacheline and alignment */
+ /* issue, I intentional set them all to 64 bytes. */
+ /* */
for (num = 0; num < NUM_OF_TX_RING; num++) {
ULONG BufBasePaHigh;
ULONG BufBasePaLow;
PVOID BufBaseVa;
- //
- // Allocate Tx ring descriptor's memory (5 TX rings = 4 ACs + 1 HCCA)
- //
+ /* */
+ /* Allocate Tx ring descriptor's memory (5 TX rings = 4 ACs + 1 HCCA) */
+ /* */
pAd->TxDescRing[num].AllocSize =
TX_RING_SIZE * TXD_SIZE;
RTMP_AllocateTxDescMemory(pAd, num,
Status = NDIS_STATUS_RESOURCES;
break;
}
- // Zero init this memory block
+ /* Zero init this memory block */
NdisZeroMemory(pAd->TxDescRing[num].AllocVa,
pAd->TxDescRing[num].AllocSize);
- // Save PA & VA for further operation
+ /* Save PA & VA for further operation */
RingBasePaHigh =
RTMP_GetPhysicalAddressHigh(pAd->TxDescRing[num].
AllocPa);
AllocPa);
RingBaseVa = pAd->TxDescRing[num].AllocVa;
- //
- // Allocate all 1st TXBuf's memory for this TxRing
- //
+ /* */
+ /* Allocate all 1st TXBuf's memory for this TxRing */
+ /* */
pAd->TxBufSpace[num].AllocSize =
TX_RING_SIZE * TX_DMA_1ST_BUFFER_SIZE;
RTMP_AllocateFirstTxBuffer(pAd, num,
Status = NDIS_STATUS_RESOURCES;
break;
}
- // Zero init this memory block
+ /* Zero init this memory block */
NdisZeroMemory(pAd->TxBufSpace[num].AllocVa,
pAd->TxBufSpace[num].AllocSize);
- // Save PA & VA for further operation
+ /* Save PA & VA for further operation */
BufBasePaHigh =
RTMP_GetPhysicalAddressHigh(pAd->TxBufSpace[num].
AllocPa);
AllocPa);
BufBaseVa = pAd->TxBufSpace[num].AllocVa;
- //
- // Initialize Tx Ring Descriptor and associated buffer memory
- //
+ /* */
+ /* Initialize Tx Ring Descriptor and associated buffer memory */
+ /* */
pTxRing = &pAd->TxRing[num];
for (index = 0; index < TX_RING_SIZE; index++) {
pTxRing->Cell[index].pNdisPacket = NULL;
pTxRing->Cell[index].pNextNdisPacket = NULL;
- // Init Tx Ring Size, Va, Pa variables
+ /* Init Tx Ring Size, Va, Pa variables */
pTxRing->Cell[index].AllocSize = TXD_SIZE;
pTxRing->Cell[index].AllocVa = RingBaseVa;
RTMP_SetPhysicalAddressHigh(pTxRing->
AllocPa,
RingBasePaLow);
- // Setup Tx Buffer size & address. only 802.11 header will store in this space
+ /* Setup Tx Buffer size & address. only 802.11 header will store in this space */
pDmaBuf = &pTxRing->Cell[index].DmaBuf;
pDmaBuf->AllocSize = TX_DMA_1ST_BUFFER_SIZE;
pDmaBuf->AllocVa = BufBaseVa;
RTMP_SetPhysicalAddressLow(pDmaBuf->AllocPa,
BufBasePaLow);
- // link the pre-allocated TxBuf to TXD
+ /* link the pre-allocated TxBuf to TXD */
pTxD =
(PTXD_STRUC) pTxRing->Cell[index].AllocVa;
pTxD->SDPtr0 = BufBasePaLow;
- // advance to next ring descriptor address
+ /* advance to next ring descriptor address */
pTxD->DMADONE = 1;
RingBasePaLow += TXD_SIZE;
RingBaseVa = (PUCHAR) RingBaseVa + TXD_SIZE;
- // advance to next TxBuf address
+ /* advance to next TxBuf address */
BufBasePaLow += TX_DMA_1ST_BUFFER_SIZE;
BufBaseVa =
(PUCHAR) BufBaseVa + TX_DMA_1ST_BUFFER_SIZE;
if (Status == NDIS_STATUS_RESOURCES)
break;
- //
- // Allocate MGMT ring descriptor's memory except Tx ring which allocated eariler
- //
+ /* */
+ /* Allocate MGMT ring descriptor's memory except Tx ring which allocated eariler */
+ /* */
pAd->MgmtDescRing.AllocSize = MGMT_RING_SIZE * TXD_SIZE;
RTMP_AllocateMgmtDescMemory(pAd,
pAd->MgmtDescRing.AllocSize,
Status = NDIS_STATUS_RESOURCES;
break;
}
- // Zero init this memory block
+ /* Zero init this memory block */
NdisZeroMemory(pAd->MgmtDescRing.AllocVa,
pAd->MgmtDescRing.AllocSize);
- // Save PA & VA for further operation
+ /* Save PA & VA for further operation */
RingBasePaHigh =
RTMP_GetPhysicalAddressHigh(pAd->MgmtDescRing.AllocPa);
RingBasePaLow =
RTMP_GetPhysicalAddressLow(pAd->MgmtDescRing.AllocPa);
RingBaseVa = pAd->MgmtDescRing.AllocVa;
- //
- // Initialize MGMT Ring and associated buffer memory
- //
+ /* */
+ /* Initialize MGMT Ring and associated buffer memory */
+ /* */
for (index = 0; index < MGMT_RING_SIZE; index++) {
pAd->MgmtRing.Cell[index].pNdisPacket = NULL;
pAd->MgmtRing.Cell[index].pNextNdisPacket = NULL;
- // Init MGMT Ring Size, Va, Pa variables
+ /* Init MGMT Ring Size, Va, Pa variables */
pAd->MgmtRing.Cell[index].AllocSize = TXD_SIZE;
pAd->MgmtRing.Cell[index].AllocVa = RingBaseVa;
RTMP_SetPhysicalAddressHigh(pAd->MgmtRing.Cell[index].
RTMP_SetPhysicalAddressLow(pAd->MgmtRing.Cell[index].
AllocPa, RingBasePaLow);
- // Offset to next ring descriptor address
+ /* Offset to next ring descriptor address */
RingBasePaLow += TXD_SIZE;
RingBaseVa = (PUCHAR) RingBaseVa + TXD_SIZE;
- // link the pre-allocated TxBuf to TXD
+ /* link the pre-allocated TxBuf to TXD */
pTxD = (PTXD_STRUC) pAd->MgmtRing.Cell[index].AllocVa;
pTxD->DMADONE = 1;
- // no pre-allocated buffer required in MgmtRing for scatter-gather case
+ /* no pre-allocated buffer required in MgmtRing for scatter-gather case */
}
DBGPRINT(RT_DEBUG_TRACE,
("MGMT Ring: total %d entry allocated\n", index));
- //
- // Allocate RX ring descriptor's memory except Tx ring which allocated eariler
- //
+ /* */
+ /* Allocate RX ring descriptor's memory except Tx ring which allocated eariler */
+ /* */
pAd->RxDescRing.AllocSize = RX_RING_SIZE * RXD_SIZE;
RTMP_AllocateRxDescMemory(pAd,
pAd->RxDescRing.AllocSize,
Status = NDIS_STATUS_RESOURCES;
break;
}
- // Zero init this memory block
+ /* Zero init this memory block */
NdisZeroMemory(pAd->RxDescRing.AllocVa,
pAd->RxDescRing.AllocSize);
("RX DESC %p size = %ld\n", pAd->RxDescRing.AllocVa,
pAd->RxDescRing.AllocSize));
- // Save PA & VA for further operation
+ /* Save PA & VA for further operation */
RingBasePaHigh =
RTMP_GetPhysicalAddressHigh(pAd->RxDescRing.AllocPa);
RingBasePaLow =
RTMP_GetPhysicalAddressLow(pAd->RxDescRing.AllocPa);
RingBaseVa = pAd->RxDescRing.AllocVa;
- //
- // Initialize Rx Ring and associated buffer memory
- //
+ /* */
+ /* Initialize Rx Ring and associated buffer memory */
+ /* */
for (index = 0; index < RX_RING_SIZE; index++) {
- // Init RX Ring Size, Va, Pa variables
+ /* Init RX Ring Size, Va, Pa variables */
pAd->RxRing.Cell[index].AllocSize = RXD_SIZE;
pAd->RxRing.Cell[index].AllocVa = RingBaseVa;
RTMP_SetPhysicalAddressHigh(pAd->RxRing.Cell[index].
RTMP_SetPhysicalAddressLow(pAd->RxRing.Cell[index].
AllocPa, RingBasePaLow);
- //NdisZeroMemory(RingBaseVa, RXD_SIZE);
+ /*NdisZeroMemory(RingBaseVa, RXD_SIZE); */
- // Offset to next ring descriptor address
+ /* Offset to next ring descriptor address */
RingBasePaLow += RXD_SIZE;
RingBaseVa = (PUCHAR) RingBaseVa + RXD_SIZE;
- // Setup Rx associated Buffer size & allocate share memory
+ /* Setup Rx associated Buffer size & allocate share memory */
pDmaBuf = &pAd->RxRing.Cell[index].DmaBuf;
pDmaBuf->AllocSize = RX_BUFFER_AGGRESIZE;
pPacket = RTMP_AllocateRxPacketBuffer(pAd,
/* keep allocated rx packet */
pAd->RxRing.Cell[index].pNdisPacket = pPacket;
- // Error handling
+ /* Error handling */
if (pDmaBuf->AllocVa == NULL) {
ErrorValue = ERRLOG_OUT_OF_SHARED_MEMORY;
DBGPRINT_ERR(("Failed to allocate RxRing's 1st buffer\n"));
Status = NDIS_STATUS_RESOURCES;
break;
}
- // Zero init this memory block
+ /* Zero init this memory block */
NdisZeroMemory(pDmaBuf->AllocVa, pDmaBuf->AllocSize);
- // Write RxD buffer address & allocated buffer length
+ /* Write RxD buffer address & allocated buffer length */
pRxD = (PRXD_STRUC) pAd->RxRing.Cell[index].AllocVa;
pRxD->SDP0 =
RTMP_GetPhysicalAddressLow(pDmaBuf->AllocPa);
}
if (Status != NDIS_STATUS_SUCCESS) {
- // Log error inforamtion
+ /* Log error inforamtion */
NdisWriteErrorLogEntry(pAd->AdapterHandle,
NDIS_ERROR_CODE_OUT_OF_RESOURCES,
1, ErrorValue);
}
- // Following code segment get from original func:NICInitTxRxRingAndBacklogQueue(), now should integrate it to here.
+ /* Following code segment get from original func:NICInitTxRxRingAndBacklogQueue(), now should integrate it to here. */
{
DBGPRINT(RT_DEBUG_TRACE,
("--> NICInitTxRxRingAndBacklogQueue\n"));
RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);
*/
- // Initialize all transmit related software queues
+ /* Initialize all transmit related software queues */
for (index = 0; index < NUM_OF_TX_RING; index++) {
InitializeQueueHeader(&pAd->TxSwQueue[index]);
- // Init TX rings index pointer
+ /* Init TX rings index pointer */
pAd->TxRing[index].TxSwFreeIdx = 0;
pAd->TxRing[index].TxCpuIdx = 0;
- //RTMP_IO_WRITE32(pAd, (TX_CTX_IDX0 + i * 0x10) , pAd->TxRing[i].TX_CTX_IDX);
+ /*RTMP_IO_WRITE32(pAd, (TX_CTX_IDX0 + i * 0x10) , pAd->TxRing[i].TX_CTX_IDX); */
}
- // Init RX Ring index pointer
+ /* Init RX Ring index pointer */
pAd->RxRing.RxSwReadIdx = 0;
pAd->RxRing.RxCpuIdx = RX_RING_SIZE - 1;
- //RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RX_CRX_IDX0);
+ /*RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RX_CRX_IDX0); */
- // init MGMT ring index pointer
+ /* init MGMT ring index pointer */
pAd->MgmtRing.TxSwFreeIdx = 0;
pAd->MgmtRing.TxCpuIdx = 0;
int i;
PRTMP_TX_RING pTxRing;
unsigned long IrqFlags;
- //UINT32 RxSwReadIdx;
+ /*UINT32 RxSwReadIdx; */
DBGPRINT(RT_DEBUG_TRACE,
("RTMPRingCleanUp(RingIdx=%d, Pending-NDIS=%ld)\n", RingType,
pTxRing = &pAd->TxRing[RingType];
RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
- // We have to clean all descriptors in case some error happened with reset
- for (i = 0; i < TX_RING_SIZE; i++) // We have to scan all TX ring
+ /* We have to clean all descriptors in case some error happened with reset */
+ for (i = 0; i < TX_RING_SIZE; i++) /* We have to scan all TX ring */
{
pTxD = (PTXD_STRUC) pTxRing->Cell[i].AllocVa;
pPacket = (PNDIS_PACKET) pTxRing->Cell[i].pNdisPacket;
- // release scatter-and-gather NDIS_PACKET
+ /* release scatter-and-gather NDIS_PACKET */
if (pPacket) {
RELEASE_NDIS_PACKET(pAd, pPacket,
NDIS_STATUS_FAILURE);
pPacket =
(PNDIS_PACKET) pTxRing->Cell[i].pNextNdisPacket;
- // release scatter-and-gather NDIS_PACKET
+ /* release scatter-and-gather NDIS_PACKET */
if (pPacket) {
RELEASE_NDIS_PACKET(pAd, pPacket,
NDIS_STATUS_FAILURE);
break;
case QID_MGMT:
- // We have to clean all descriptors in case some error happened with reset
+ /* We have to clean all descriptors in case some error happened with reset */
NdisAcquireSpinLock(&pAd->MgmtRingLock);
for (i = 0; i < MGMT_RING_SIZE; i++) {
pPacket =
(PNDIS_PACKET) pAd->MgmtRing.Cell[i].pNdisPacket;
- // rlease scatter-and-gather NDIS_PACKET
+ /* rlease scatter-and-gather NDIS_PACKET */
if (pPacket) {
PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0,
pTxD->SDLen0,
pPacket =
(PNDIS_PACKET) pAd->MgmtRing.Cell[i].
pNextNdisPacket;
- // release scatter-and-gather NDIS_PACKET
+ /* release scatter-and-gather NDIS_PACKET */
if (pPacket) {
PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1,
pTxD->SDLen1,
break;
case QID_RX:
- // We have to clean all descriptors in case some error happened with reset
+ /* We have to clean all descriptors in case some error happened with reset */
NdisAcquireSpinLock(&pAd->RxRingLock);
for (i = 0; i < RX_RING_SIZE; i++) {
PNDIS_PACKET pPacket;
unsigned int IrqFlags;
- //POS_COOKIE pObj =(POS_COOKIE) pAd->OS_Cookie;
+ /*POS_COOKIE pObj =(POS_COOKIE) pAd->OS_Cookie; */
DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPFreeTxRxRingMemory\n"));
- // Free TxSwQueue Packet
+ /* Free TxSwQueue Packet */
for (index = 0; index < NUM_OF_TX_RING; index++) {
PQUEUE_ENTRY pEntry;
PNDIS_PACKET pPacket;
RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
}
- // Free Tx Ring Packet
+ /* Free Tx Ring Packet */
for (index = 0; index < NUM_OF_TX_RING; index++) {
pTxRing = &pAd->TxRing[index];
RELEASE_NDIS_PACKET(pAd, pPacket,
NDIS_STATUS_SUCCESS);
}
- //Always assign pNdisPacket as NULL after clear
+ /*Always assign pNdisPacket as NULL after clear */
pTxRing->Cell[j].pNdisPacket = NULL;
pPacket = pTxRing->Cell[j].pNextNdisPacket;
RELEASE_NDIS_PACKET(pAd, pPacket,
NDIS_STATUS_SUCCESS);
}
- //Always assign pNextNdisPacket as NULL after clear
+ /*Always assign pNextNdisPacket as NULL after clear */
pTxRing->Cell[pTxRing->TxSwFreeIdx].pNextNdisPacket =
NULL;
i = 0;
do {
RTMP_IO_READ32(pAd, H2M_MAILBOX_CID, &CID);
- // Find where the command is. Because this is randomly specified by firmware.
+ /* Find where the command is. Because this is randomly specified by firmware. */
if ((CID & CID0MASK) == Command) {
ThisCIDMask = CID0MASK;
break;
i++;
} while (i < 200);
- // Get CommandStatus Value
+ /* Get CommandStatus Value */
RTMP_IO_READ32(pAd, H2M_MAILBOX_STATUS, &CmdStatus);
- // This command's status is at the same position as command. So AND command position's bitmask to read status.
+ /* This command's status is at the same position as command. So AND command position's bitmask to read status. */
if (i < 200) {
- // If Status is 1, the comamnd is success.
+ /* If Status is 1, the comamnd is success. */
if (((CmdStatus & ThisCIDMask) == 0x1)
|| ((CmdStatus & ThisCIDMask) == 0x100)
|| ((CmdStatus & ThisCIDMask) == 0x10000)
("--> AsicCheckCommanFail2 Timeout Command = %d, CmdStatus= 0x%x \n",
Command, CmdStatus));
}
- // Clear Command and Status.
+ /* Clear Command and Status. */
RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff);
RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff);
return;
}
- //if ((pAd->WdsTab.Mode == WDS_BRIDGE_MODE)
- // || ((pAd->ApCfg.MBSSID[apidx].MSSIDDev == NULL)
- // || !(pAd->ApCfg.MBSSID[apidx].MSSIDDev->flags & IFF_UP))
- // )
+ /*if ((pAd->WdsTab.Mode == WDS_BRIDGE_MODE) */
+ /* || ((pAd->ApCfg.MBSSID[apidx].MSSIDDev == NULL) */
+ /* || !(pAd->ApCfg.MBSSID[apidx].MSSIDDev->flags & IFF_UP)) */
+ /* ) */
if (bBcnReq == FALSE) {
/* when the ra interface is down, do not send its beacon frame */
/* clear all zero */
0x00);
} else {
ptr = (PUCHAR) & pAd->BeaconTxWI;
- for (i = 0; i < TXWI_SIZE; i += 4) // 16-byte TXWI field
+ for (i = 0; i < TXWI_SIZE; i += 4) /* 16-byte TXWI field */
{
UINT32 longptr =
*ptr + (*(ptr + 1) << 8) + (*(ptr + 2) << 16) +
ptr += 4;
}
- // Update CapabilityInfo in Beacon
+ /* Update CapabilityInfo in Beacon */
for (i = CapInfoPos; i < (CapInfoPos + 2); i++) {
RTMP_IO_WRITE8(pAd,
pAd->BeaconOffset[bcn_idx] + TXWI_SIZE +
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
&& pAd->StaCfg.PSControl.field.EnableNewPS == TRUE) {
- // Support PCIe Advance Power Save
+ /* Support PCIe Advance Power Save */
if (bFromTx == TRUE && (pAd->Mlme.bPsPollTimerRunning == TRUE)) {
pAd->Mlme.bPsPollTimerRunning = FALSE;
RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE)) {
#ifdef PCIE_PS_SUPPORT
- // add by johnli, RF power sequence setup, load RF normal operation-mode setup
+ /* add by johnli, RF power sequence setup, load RF normal operation-mode setup */
if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
&& IS_VERSION_AFTER_F(pAd)) {
RTMP_CHIP_OP *pChipOps = &pAd->chipOps;
pChipOps->
AsicReverseRfFromSleepMode(pAd);
} else
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
{
- // end johnli
- // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
+ /* end johnli */
+ /* In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. */
if (INFRA_ON(pAd)
&& (pAd->CommonCfg.CentralChannel !=
pAd->CommonCfg.Channel)
&& (pAd->MlmeAux.HtCapability.HtCapInfo.
ChannelWidth == BW_40)) {
- // Must using 40MHz.
+ /* Must using 40MHz. */
AsicSwitchChannel(pAd,
pAd->CommonCfg.
CentralChannel,
pAd->CommonCfg.
CentralChannel);
} else {
- // Must using 20MHz.
+ /* Must using 20MHz. */
AsicSwitchChannel(pAd,
pAd->CommonCfg.
Channel, FALSE);
}
}
#ifdef PCIE_PS_SUPPORT
- // 3090 MCU Wakeup command needs more time to be stable.
- // Before stable, don't issue other MCU command to prevent from firmware error.
+ /* 3090 MCU Wakeup command needs more time to be stable. */
+ /* Before stable, don't issue other MCU command to prevent from firmware error. */
if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
&& IS_VERSION_AFTER_F(pAd)) && IS_VERSION_AFTER_F(pAd)
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
pAd->brt30xxBanMcuCmd = FALSE;
RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
}
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
} else {
- // PCI, 2860-PCIe
+ /* PCI, 2860-PCIe */
DBGPRINT(RT_DEBUG_TRACE,
("<==RT28xxPciStaAsicForceWakeup::Original PCI Power Saving\n"));
AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
}
NdisGetSystemUpTime(&Now);
- // If last send NULL fram time is too close to this receiving beacon (within 8ms), don't go to sleep for this DTM.
- // Because Some AP can't queuing outgoing frames immediately.
+ /* If last send NULL fram time is too close to this receiving beacon (within 8ms), don't go to sleep for this DTM. */
+ /* Because Some AP can't queuing outgoing frames immediately. */
if (((pAd->Mlme.LastSendNULLpsmTime + 8) >= Now)
&& (pAd->Mlme.LastSendNULLpsmTime <= Now)) {
DBGPRINT(RT_DEBUG_TRACE,
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
} else {
AUTO_WAKEUP_STRUC AutoWakeupCfg;
- // we have decided to SLEEP, so at least do it for a BEACON period.
+ /* we have decided to SLEEP, so at least do it for a BEACON period. */
if (TbttNumToNextWakeUp == 0)
TbttNumToNextWakeUp = 1;
- //RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt);
+ /*RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt); */
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
AutoWakeupCfg.field.EnableAutoWakeup = 1;
AutoWakeupCfg.field.AutoLeadTime = 5;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
- AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x00); // send POWER-SAVE command to MCU. Timeout 40us.
+ AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x00); /* send POWER-SAVE command to MCU. Timeout 40us. */
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
DBGPRINT(RT_DEBUG_TRACE,
("<-- %s, TbttNumToNextWakeUp=%d \n", __func__,
pAd->Mlme.bPsPollTimerRunning = FALSE;
RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
#ifdef PCIE_PS_SUPPORT
- // For rt30xx power solution 3, Use software timer to wake up in psm. So call
- // AsicForceWakeup here instead of handling twakeup interrupt.
+ /* For rt30xx power solution 3, Use software timer to wake up in psm. So call */
+ /* AsicForceWakeup here instead of handling twakeup interrupt. */
if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
&& IS_VERSION_AFTER_F(pAd))
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
("<--PsPollWakeExec::3090 calls AsicForceWakeup(pAd, DOT11POWERSAVE) in advance \n"));
AsicForceWakeup(pAd, DOT11POWERSAVE);
}
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
}
VOID RadioOnExec(IN PVOID SystemSpecific1,
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) {
DBGPRINT(RT_DEBUG_TRACE,
("-->RadioOnExec() return on fOP_STATUS_DOZE == TRUE; \n"));
-//KH Debug: Add the compile flag "RT2860 and condition
+/*KH Debug: Add the compile flag "RT2860 and condition */
#ifdef RTMP_PCI_SUPPORT
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
&& pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
return;
}
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
&& pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
return;
}
-//KH Debug: need to check. I add the compile flag "CONFIG_STA_SUPPORT" to enclose the following codes.
+/*KH Debug: need to check. I add the compile flag "CONFIG_STA_SUPPORT" to enclose the following codes. */
#ifdef RTMP_PCI_SUPPORT
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
&& pAd->StaCfg.PSControl.field.EnableNewPS == TRUE) {
pAd->Mlme.bPsPollTimerRunning = FALSE;
RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
}
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
if (pAd->StaCfg.bRadio == TRUE) {
pAd->bPCIclkOff = FALSE;
RTMPRingCleanUp(pAd, QID_AC_BK);
RTMPRingCleanUp(pAd, QID_MGMT);
RTMPRingCleanUp(pAd, QID_RX);
- // 2. Send wake up command.
+ /* 2. Send wake up command. */
AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
- // 2-1. wait command ok.
+ /* 2-1. wait command ok. */
AsicCheckCommanOk(pAd, PowerWakeCID);
- // When PCI clock is off, don't want to service interrupt. So when back to clock on, enable interrupt.
- //RTMP_IO_WRITE32(pAd, INT_MASK_CSR, (DELAYINTMASK|RxINT));
+ /* When PCI clock is off, don't want to service interrupt. So when back to clock on, enable interrupt. */
+ /*RTMP_IO_WRITE32(pAd, INT_MASK_CSR, (DELAYINTMASK|RxINT)); */
RTMP_ASIC_INTERRUPT_ENABLE(pAd);
- // 3. Enable Tx DMA.
+ /* 3. Enable Tx DMA. */
RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
DmaCfg.field.EnableTxDMA = 1;
RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
- // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
+ /* In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. */
if (INFRA_ON(pAd)
&& (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth ==
BW_40)) {
- // Must using 40MHz.
+ /* Must using 40MHz. */
AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel,
FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
} else {
- // Must using 20MHz.
+ /* Must using 20MHz. */
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
}
-//KH Debug:The following codes should be enclosed by RT3090 compile flag
+/*KH Debug:The following codes should be enclosed by RT3090 compile flag */
if (pChipOps->AsicReverseRfFromSleepMode)
pChipOps->AsicReverseRfFromSleepMode(pAd);
#ifdef PCIE_PS_SUPPORT
-// 3090 MCU Wakeup command needs more time to be stable.
-// Before stable, don't issue other MCU command to prevent from firmware error.
+/* 3090 MCU Wakeup command needs more time to be stable. */
+/* Before stable, don't issue other MCU command to prevent from firmware error. */
if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
&& IS_VERSION_AFTER_F(pAd)
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
pAd->brt30xxBanMcuCmd = FALSE;
RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
}
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
- // Clear Radio off flag
+ /* Clear Radio off flag */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
- // Set LED
+ /* Set LED */
RTMPSetLED(pAd, LED_RADIO_ON);
if (pAd->StaCfg.Psm == PWR_ACTIVE) {
*/
BOOLEAN RT28xxPciAsicRadioOn(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
{
- //WPDMA_GLO_CFG_STRUC DmaCfg;
+ /*WPDMA_GLO_CFG_STRUC DmaCfg; */
BOOLEAN Cancelled;
- //UINT32 MACValue;
+ /*UINT32 MACValue; */
if (pAd->OpMode == OPMODE_AP && Level == DOT11POWERSAVE)
return FALSE;
if ((pAd->StaCfg.PSControl.field.EnableNewPS == TRUE &&
(Level == GUIRADIO_OFF || Level == GUI_IDLE_POWER_SAVE)) ||
RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) {
- // Some chips don't need to delay 6ms, so copy RTMPPCIePowerLinkCtrlRestore
- // return condition here.
+ /* Some chips don't need to delay 6ms, so copy RTMPPCIePowerLinkCtrlRestore */
+ /* return condition here. */
/*
if (((pAd->MACVersion&0xffff0000) != 0x28600000)
&& ((pAd->DeviceID == NIC2860_PCIe_DEVICE_ID)
{
DBGPRINT(RT_DEBUG_TRACE,
("RT28xxPciAsicRadioOn ()\n"));
- // 1. Set PCI Link Control in Configuration Space.
+ /* 1. Set PCI Link Control in Configuration Space. */
RTMPPCIeLinkCtrlValueRestore(pAd,
RESTORE_WAKEUP);
RTMPusecDelay(6000);
&& IS_VERSION_AFTER_F(pAd)
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
&& (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE))))
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
{
pAd->bPCIclkOff = FALSE;
DBGPRINT(RT_DEBUG_TRACE,
("PSM :309xbPCIclkOff == %d\n", pAd->bPCIclkOff));
}
- // 2. Send wake up command.
+ /* 2. Send wake up command. */
AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
pAd->bPCIclkOff = FALSE;
- // 2-1. wait command ok.
+ /* 2-1. wait command ok. */
AsicCheckCommanOk(pAd, PowerWakeCID);
RTMP_ASIC_INTERRUPT_ENABLE(pAd);
if (Level == GUI_IDLE_POWER_SAVE) {
#ifdef PCIE_PS_SUPPORT
- // add by johnli, RF power sequence setup, load RF normal operation-mode setup
+ /* add by johnli, RF power sequence setup, load RF normal operation-mode setup */
if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))) {
RTMP_CHIP_OP *pChipOps = &pAd->chipOps;
if (pChipOps->AsicReverseRfFromSleepMode)
pChipOps->AsicReverseRfFromSleepMode(pAd);
- // 3090 MCU Wakeup command needs more time to be stable.
- // Before stable, don't issue other MCU command to prevent from firmware error.
+ /* 3090 MCU Wakeup command needs more time to be stable. */
+ /* Before stable, don't issue other MCU command to prevent from firmware error. */
if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
&& IS_VERSION_AFTER_F(pAd)
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode ==
RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
}
} else
- // end johnli
-#endif // PCIE_PS_SUPPORT //
+ /* end johnli */
+#endif /* PCIE_PS_SUPPORT // */
{
- // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
+ /* In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. */
{
if (INFRA_ON(pAd)
&& (pAd->CommonCfg.CentralChannel !=
pAd->CommonCfg.Channel)
&& (pAd->MlmeAux.HtCapability.HtCapInfo.
ChannelWidth == BW_40)) {
- // Must using 40MHz.
+ /* Must using 40MHz. */
AsicSwitchChannel(pAd,
pAd->CommonCfg.
CentralChannel,
pAd->CommonCfg.
CentralChannel);
} else {
- // Must using 20MHz.
+ /* Must using 20MHz. */
AsicSwitchChannel(pAd,
pAd->CommonCfg.
Channel, FALSE);
if (pAd->OpMode == OPMODE_AP && Level == DOT11POWERSAVE)
return FALSE;
- // Check Rx DMA busy status, if more than half is occupied, give up this radio off.
+ /* Check Rx DMA busy status, if more than half is occupied, give up this radio off. */
RTMP_IO_READ32(pAd, RX_DRX_IDX, &RxDmaIdx);
RTMP_IO_READ32(pAd, RX_CRX_IDX, &RxCpuIdx);
if ((RxDmaIdx > RxCpuIdx) && ((RxDmaIdx - RxCpuIdx) > RX_RING_SIZE / 3)) {
RxCpuIdx, RxDmaIdx));
return FALSE;
}
- // Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops.
- //pAd->bPCIclkOffDisableTx = TRUE;
+ /* Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops. */
+ /*pAd->bPCIclkOffDisableTx = TRUE; */
RTMP_SET_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
&& pAd->OpMode == OPMODE_STA
if (Level == DOT11POWERSAVE) {
RTMP_IO_READ32(pAd, TBTT_TIMER, &TbTTTime);
TbTTTime &= 0x1ffff;
- // 00. check if need to do sleep in this DTIM period. If next beacon will arrive within 30ms , ...doesn't necessarily sleep.
- // TbTTTime uint = 64us, LEAD_TIME unit = 1024us, PsPollTime unit = 1ms
+ /* 00. check if need to do sleep in this DTIM period. If next beacon will arrive within 30ms , ...doesn't necessarily sleep. */
+ /* TbTTTime uint = 64us, LEAD_TIME unit = 1024us, PsPollTime unit = 1ms */
if (((64 * TbTTTime) < ((LEAD_TIME * 1024) + 40000))
&& (TbttNumToNextWakeUp == 0)) {
DBGPRINT(RT_DEBUG_TRACE,
("TbTTTime = 0x%x , give up this sleep. \n",
TbTTTime));
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
- //pAd->bPCIclkOffDisableTx = FALSE;
+ /*pAd->bPCIclkOffDisableTx = FALSE; */
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
return FALSE;
} else {
EnableNewPS == TRUE)) {
PsPollTime -= 5;
} else
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
PsPollTime -= 3;
BeaconPeriodTime =
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
- // Set to 1R.
+ /* Set to 1R. */
if (pAd->Antenna.field.RxPath > 1 && pAd->OpMode == OPMODE_STA) {
tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3);
}
- // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
+ /* In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. */
if ((INFRA_ON(pAd) || pAd->OpMode == OPMODE_AP)
&& (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) {
- // Must using 40MHz.
+ /* Must using 40MHz. */
AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel);
} else {
- // Must using 20MHz.
+ /* Must using 20MHz. */
AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
}
if (Level != RTMP_HALT) {
- // Change Interrupt bitmask.
- // When PCI clock is off, don't want to service interrupt.
+ /* Change Interrupt bitmask. */
+ /* When PCI clock is off, don't want to service interrupt. */
RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt);
} else {
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx);
- // 2. Send Sleep command
+ /* 2. Send Sleep command */
RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff);
RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff);
- // send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power
+ /* send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power */
AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x1);
- // 2-1. Wait command success
- // Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task.
+ /* 2-1. Wait command success */
+ /* Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task. */
brc = AsicCheckCommanOk(pAd, PowerSafeCID);
- // 3. After 0x30 command is ok, send radio off command. lowbyte = 0 for power safe.
- // If 0x30 command is not ok this time, we can ignore 0x35 command. It will make sure not cause firmware'r problem.
+ /* 3. After 0x30 command is ok, send radio off command. lowbyte = 0 for power safe. */
+ /* If 0x30 command is not ok this time, we can ignore 0x35 command. It will make sure not cause firmware'r problem. */
if ((Level == DOT11POWERSAVE) && (brc == TRUE)) {
- AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 0, 0x00); // lowbyte = 0 means to do power safe, NOT turn off radio.
- // 3-1. Wait command success
+ AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 0, 0x00); /* lowbyte = 0 means to do power safe, NOT turn off radio. */
+ /* 3-1. Wait command success */
AsicCheckCommanOk(pAd, PowerRadioOffCID);
} else if (brc == TRUE) {
- AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 1, 0x00); // lowbyte = 0 means to do power safe, NOT turn off radio.
- // 3-1. Wait command success
+ AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 1, 0x00); /* lowbyte = 0 means to do power safe, NOT turn off radio. */
+ /* 3-1. Wait command success */
AsicCheckCommanOk(pAd, PowerRadioOffCID);
}
- // 1. Wait DMA not busy
+ /* 1. Wait DMA not busy */
i = 0;
do {
RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
pAd->CheckDmaBusyCount = 0;
}
*/
-//KH Debug:My original codes have the follwoing codes, but currecnt codes do not have it.
-// Disable for stability. If PCIE Link Control is modified for advance power save, re-covery this code segment.
+/*KH Debug:My original codes have the follwoing codes, but currecnt codes do not have it. */
+/* Disable for stability. If PCIE Link Control is modified for advance power save, re-covery this code segment. */
RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x1280);
-//OPSTATUS_SET_FLAG(pAd, fOP_STATUS_CLKSELECT_40MHZ);
+/*OPSTATUS_SET_FLAG(pAd, fOP_STATUS_CLKSELECT_40MHZ); */
#ifdef PCIE_PS_SUPPORT
if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
("RT28xxPciAsicRadioOff::3090 return to skip the following TbttNumToNextWakeUp setting for 279x\n"));
pAd->bPCIclkOff = TRUE;
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
- // For this case, doesn't need to below actions, so return here.
+ /* For this case, doesn't need to below actions, so return here. */
return brc;
}
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
if (Level == DOT11POWERSAVE) {
AUTO_WAKEUP_STRUC AutoWakeupCfg;
- //RTMPSetTimer(&pAd->Mlme.PsPollTimer, 90);
+ /*RTMPSetTimer(&pAd->Mlme.PsPollTimer, 90); */
- // we have decided to SLEEP, so at least do it for a BEACON period.
+ /* we have decided to SLEEP, so at least do it for a BEACON period. */
if (TbttNumToNextWakeUp == 0)
TbttNumToNextWakeUp = 1;
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
- // 1. Set auto wake up timer.
+ /* 1. Set auto wake up timer. */
AutoWakeupCfg.field.NumofSleepingTbtt = TbttNumToNextWakeUp - 1;
AutoWakeupCfg.field.EnableAutoWakeup = 1;
AutoWakeupCfg.field.AutoLeadTime = LEAD_TIME;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
}
- // 4-1. If it's to disable our device. Need to restore PCI Configuration Space to its original value.
+ /* 4-1. If it's to disable our device. Need to restore PCI Configuration Space to its original value. */
if (Level == RTMP_HALT && pAd->OpMode == OPMODE_STA) {
if ((brc == TRUE) && (i < 50))
RTMPPCIeLinkCtrlSetting(pAd, 1);
}
- // 4. Set PCI configuration Space Link Comtrol fields. Only Radio Off needs to call this function
+ /* 4. Set PCI configuration Space Link Comtrol fields. Only Radio Off needs to call this function */
else if (pAd->OpMode == OPMODE_STA) {
if ((brc == TRUE) && (i < 50))
RTMPPCIeLinkCtrlSetting(pAd, 3);
}
- //pAd->bPCIclkOffDisableTx = FALSE;
+ /*pAd->bPCIclkOffDisableTx = FALSE; */
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
return TRUE;
}
|| pAd->StaCfg.PSControl.field.
EnableNewPS == FALSE))) {
RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
- //NICResetFromError(pAd);
+ /*NICResetFromError(pAd); */
RTMPRingCleanUp(pAd, QID_AC_BK);
RTMPRingCleanUp(pAd, QID_AC_BE);
RTMPRingCleanUp(pAd, QID_MGMT);
RTMPRingCleanUp(pAd, QID_RX);
- // Enable Tx/Rx
+ /* Enable Tx/Rx */
RTMPEnableRxTx(pAd);
- // Clear Radio off flag
+ /* Clear Radio off flag */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
- // Set LED
+ /* Set LED */
RTMPSetLED(pAd, LED_RADIO_ON);
}
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
return;
- // Link down first if any association exists
+ /* Link down first if any association exists */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) {
if (INFRA_ON(pAd) || ADHOC_ON(pAd)) {
MLME_DISASSOC_REQ_STRUCT DisReq;
DBGPRINT(RT_DEBUG_TRACE, ("%s===>\n", __func__));
- // Set Radio off flag
+ /* Set Radio off flag */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
{
RTMP_CLEAR_FLAG(pAd,
fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
}
- // If during power safe mode.
+ /* If during power safe mode. */
if (pAd->StaCfg.bRadio == TRUE) {
DBGPRINT(RT_DEBUG_TRACE,
("-->MlmeRadioOff() return on bRadio == TRUE; \n"));
return;
}
- // Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF).
+ /* Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF). */
if (IDLE_ON(pAd) &&
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
{
&Cancelled);
}
}
- // Link down first if any association exists
+ /* Link down first if any association exists */
if (INFRA_ON(pAd) || ADHOC_ON(pAd))
LinkDown(pAd, FALSE);
RTMPusecDelay(10000);
- //==========================================
- // Clean up old bss table
+ /*========================================== */
+ /* Clean up old bss table */
BssTableInit(&pAd->ScanTab);
/*
*/
}
- // Set LED.Move to here for fixing LED bug. This flag must be called after LinkDown
+ /* Set LED.Move to here for fixing LED bug. This flag must be called after LinkDown */
RTMPSetLED(pAd, LED_RADIO_OFF);
-//KH Debug:All PCIe devices need to use timer to execute radio off function, or the PCIe&&EnableNewPS needs.
-//KH Ans:It is right, because only when the PCIe and EnableNewPs is true, we need to delay the RadioOffTimer
-//to avoid the deadlock with PCIe Power saving function.
+/*KH Debug:All PCIe devices need to use timer to execute radio off function, or the PCIe&&EnableNewPS needs. */
+/*KH Ans:It is right, because only when the PCIe and EnableNewPs is true, we need to delay the RadioOffTimer */
+/*to avoid the deadlock with PCIe Power saving function. */
if (pAd->OpMode == OPMODE_STA &&
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE) &&
pAd->StaCfg.PSControl.field.EnableNewPS == TRUE) {
*/
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitRecv\n"));
pObj = pObj;
- //InterlockedExchange(&pAd->PendingRx, 0);
+ /*InterlockedExchange(&pAd->PendingRx, 0); */
pAd->PendingRx = 0;
- pAd->NextRxBulkInReadIndex = 0; // Next Rx Read index
- pAd->NextRxBulkInIndex = 0; //RX_RING_SIZE -1; // Rx Bulk pointer
+ pAd->NextRxBulkInReadIndex = 0; /* Next Rx Read index */
+ pAd->NextRxBulkInIndex = 0; /*RX_RING_SIZE -1; // Rx Bulk pointer */
pAd->NextRxBulkInPosition = 0;
for (i = 0; i < (RX_RING_SIZE); i++) {
PRX_CONTEXT pRxContext = &(pAd->RxContext[i]);
- //Allocate URB
+ /*Allocate URB */
pRxContext->pUrb = RTUSB_ALLOC_URB(0);
if (pRxContext->pUrb == NULL) {
Status = NDIS_STATUS_RESOURCES;
goto out1;
}
- // Allocate transfer buffer
+ /* Allocate transfer buffer */
pRxContext->TransferBuffer =
RTUSB_URB_ALLOC_BUFFER(pObj->pUsb_Dev, MAX_RXBULK_SIZE,
&pRxContext->data_dma);
pRxContext->InUse = FALSE;
pRxContext->IRPPending = FALSE;
pRxContext->Readable = FALSE;
- //pRxContext->ReorderInUse = FALSE;
+ /*pRxContext->ReorderInUse = FALSE; */
pRxContext->bRxHandling = FALSE;
pRxContext->BulkInOffset = 0;
}
PTX_CONTEXT pPsPollContext = &(pAd->PsPollContext);
PTX_CONTEXT pRTSContext = &(pAd->RTSContext);
PTX_CONTEXT pMLMEContext = NULL;
-// PHT_TX_CONTEXT pHTTXContext = NULL;
+/* PHT_TX_CONTEXT pHTTXContext = NULL; */
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
PVOID RingBaseVa;
-// RTMP_TX_RING *pTxRing;
+/* RTMP_TX_RING *pTxRing; */
RTMP_MGMT_RING *pMgmtRing;
DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitTransmit\n"));
pObj = pObj;
- // Init 4 set of Tx parameters
+ /* Init 4 set of Tx parameters */
for (acidx = 0; acidx < NUM_OF_TX_RING; acidx++) {
- // Initialize all Transmit releated queues
+ /* Initialize all Transmit releated queues */
InitializeQueueHeader(&pAd->TxSwQueue[acidx]);
- // Next Local tx ring pointer waiting for buck out
+ /* Next Local tx ring pointer waiting for buck out */
pAd->NextBulkOutIndex[acidx] = acidx;
- pAd->BulkOutPending[acidx] = FALSE; // Buck Out control flag
- //pAd->DataBulkDoneIdx[acidx] = 0;
+ pAd->BulkOutPending[acidx] = FALSE; /* Buck Out control flag */
+ /*pAd->DataBulkDoneIdx[acidx] = 0; */
}
- //pAd->NextMLMEIndex = 0;
- //pAd->PushMgmtIndex = 0;
- //pAd->PopMgmtIndex = 0;
- //InterlockedExchange(&pAd->MgmtQueueSize, 0);
- //InterlockedExchange(&pAd->TxCount, 0);
+ /*pAd->NextMLMEIndex = 0; */
+ /*pAd->PushMgmtIndex = 0; */
+ /*pAd->PopMgmtIndex = 0; */
+ /*InterlockedExchange(&pAd->MgmtQueueSize, 0); */
+ /*InterlockedExchange(&pAd->TxCount, 0); */
- //pAd->PrioRingFirstIndex = 0;
- //pAd->PrioRingTxCnt = 0;
+ /*pAd->PrioRingFirstIndex = 0; */
+ /*pAd->PrioRingTxCnt = 0; */
do {
- //
- // TX_RING_SIZE, 4 ACs
- //
+ /* */
+ /* TX_RING_SIZE, 4 ACs */
+ /* */
for (acidx = 0; acidx < 4; acidx++) {
PHT_TX_CONTEXT pHTTXContext = &(pAd->TxContext[acidx]);
NdisZeroMemory(pHTTXContext, sizeof(HT_TX_CONTEXT));
- //Allocate URB
+ /*Allocate URB */
LM_USB_ALLOC(pObj, pHTTXContext, PHTTX_BUFFER,
sizeof(HTTX_BUFFER), Status,
("<-- ERROR in Alloc TX TxContext[%d] urb!! \n",
pAd->BulkOutPending[acidx] = FALSE;
}
- //
- // MGMT_RING_SIZE
- //
+ /* */
+ /* MGMT_RING_SIZE */
+ /* */
- // Allocate MGMT ring descriptor's memory
+ /* Allocate MGMT ring descriptor's memory */
pAd->MgmtDescRing.AllocSize =
MGMT_RING_SIZE * sizeof(TX_CONTEXT);
os_alloc_mem(pAd, (PUCHAR *) (&pAd->MgmtDescRing.AllocVa),
pAd->MgmtDescRing.AllocSize);
RingBaseVa = pAd->MgmtDescRing.AllocVa;
- // Initialize MGMT Ring and associated buffer memory
+ /* Initialize MGMT Ring and associated buffer memory */
pMgmtRing = &pAd->MgmtRing;
for (i = 0; i < MGMT_RING_SIZE; i++) {
- // link the pre-allocated Mgmt buffer to MgmtRing.Cell
+ /* link the pre-allocated Mgmt buffer to MgmtRing.Cell */
pMgmtRing->Cell[i].AllocSize = sizeof(TX_CONTEXT);
pMgmtRing->Cell[i].AllocVa = RingBaseVa;
pMgmtRing->Cell[i].pNdisPacket = NULL;
pMgmtRing->Cell[i].pNextNdisPacket = NULL;
- //Allocate URB for MLMEContext
+ /*Allocate URB for MLMEContext */
pMLMEContext =
(PTX_CONTEXT) pAd->MgmtRing.Cell[i].AllocVa;
pMLMEContext->pUrb = RTUSB_ALLOC_URB(0);
pMLMEContext->BulkOutSize = 0;
pMLMEContext->SelfIdx = i;
- // Offset to next ring descriptor address
+ /* Offset to next ring descriptor address */
RingBaseVa = (PUCHAR) RingBaseVa + sizeof(TX_CONTEXT);
}
DBGPRINT(RT_DEBUG_TRACE,
("MGMT Ring: total %d entry allocated\n", i));
- //pAd->MgmtRing.TxSwFreeIdx = (MGMT_RING_SIZE - 1);
+ /*pAd->MgmtRing.TxSwFreeIdx = (MGMT_RING_SIZE - 1); */
pAd->MgmtRing.TxSwFreeIdx = MGMT_RING_SIZE;
pAd->MgmtRing.TxCpuIdx = 0;
pAd->MgmtRing.TxDmaIdx = 0;
- //
- // BEACON_RING_SIZE
- //
- for (i = 0; i < BEACON_RING_SIZE; i++) // 2
+ /* */
+ /* BEACON_RING_SIZE */
+ /* */
+ for (i = 0; i < BEACON_RING_SIZE; i++) /* 2 */
{
PTX_CONTEXT pBeaconContext = &(pAd->BeaconContext[i]);
NdisZeroMemory(pBeaconContext, sizeof(TX_CONTEXT));
- //Allocate URB
+ /*Allocate URB */
LM_USB_ALLOC(pObj, pBeaconContext, PTX_BUFFER,
sizeof(TX_BUFFER), Status,
("<-- ERROR in Alloc TX BeaconContext[%d] urb!! \n",
pBeaconContext->IRPPending = FALSE;
}
- //
- // NullContext
- //
+ /* */
+ /* NullContext */
+ /* */
NdisZeroMemory(pNullContext, sizeof(TX_CONTEXT));
- //Allocate URB
+ /*Allocate URB */
LM_USB_ALLOC(pObj, pNullContext, PTX_BUFFER, sizeof(TX_BUFFER),
Status,
("<-- ERROR in Alloc TX NullContext urb!! \n"),
pNullContext->InUse = FALSE;
pNullContext->IRPPending = FALSE;
- //
- // RTSContext
- //
+ /* */
+ /* RTSContext */
+ /* */
NdisZeroMemory(pRTSContext, sizeof(TX_CONTEXT));
- //Allocate URB
+ /*Allocate URB */
LM_USB_ALLOC(pObj, pRTSContext, PTX_BUFFER, sizeof(TX_BUFFER),
Status,
("<-- ERROR in Alloc TX RTSContext urb!! \n"),
pRTSContext->InUse = FALSE;
pRTSContext->IRPPending = FALSE;
- //
- // PsPollContext
- //
- //NdisZeroMemory(pPsPollContext, sizeof(TX_CONTEXT));
- //Allocate URB
+ /* */
+ /* PsPollContext */
+ /* */
+ /*NdisZeroMemory(pPsPollContext, sizeof(TX_CONTEXT)); */
+ /*Allocate URB */
LM_USB_ALLOC(pObj, pPsPollContext, PTX_BUFFER,
sizeof(TX_BUFFER), Status,
("<-- ERROR in Alloc TX PsPollContext urb!! \n"),
LM_URB_FREE(pObj, pTxContext, sizeof(HTTX_BUFFER));
}
- // Here we didn't have any pre-allocated memory need to free.
+ /* Here we didn't have any pre-allocated memory need to free. */
return Status;
}
*/
NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
{
-// COUNTER_802_11 pCounter = &pAd->WlanCounters;
+/* COUNTER_802_11 pCounter = &pAd->WlanCounters; */
NDIS_STATUS Status;
INT num;
DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPAllocTxRxRingMemory\n"));
do {
- // Init the CmdQ and CmdQLock
+ /* Init the CmdQ and CmdQLock */
NdisAllocateSpinLock(&pAd->CmdQLock);
NdisAcquireSpinLock(&pAd->CmdQLock);
RTUSBInitializeCmdQ(&pAd->CmdQ);
NdisReleaseSpinLock(&pAd->CmdQLock);
NdisAllocateSpinLock(&pAd->MLMEBulkOutLock);
- //NdisAllocateSpinLock(&pAd->MLMEWaitQueueLock);
+ /*NdisAllocateSpinLock(&pAd->MLMEWaitQueueLock); */
NdisAllocateSpinLock(&pAd->BulkOutLock[0]);
NdisAllocateSpinLock(&pAd->BulkOutLock[1]);
NdisAllocateSpinLock(&pAd->BulkOutLock[2]);
NdisAllocateSpinLock(&pAd->TxContextQueueLock[num]);
}
-// NdisAllocateSpinLock(&pAd->MemLock); // Not used in RT28XX
+/* NdisAllocateSpinLock(&pAd->MemLock); // Not used in RT28XX */
-// NdisAllocateSpinLock(&pAd->MacTabLock); // init it in UserCfgInit()
-// NdisAllocateSpinLock(&pAd->BATabLock); // init it in BATableInit()
+/* NdisAllocateSpinLock(&pAd->MacTabLock); // init it in UserCfgInit() */
+/* NdisAllocateSpinLock(&pAd->BATabLock); // init it in BATableInit() */
-// for(num=0; num<MAX_LEN_OF_BA_REC_TABLE; num++)
-// {
-// NdisAllocateSpinLock(&pAd->BATable.BARecEntry[num].RxReRingLock);
-// }
+/* for(num=0; num<MAX_LEN_OF_BA_REC_TABLE; num++) */
+/* { */
+/* NdisAllocateSpinLock(&pAd->BATable.BARecEntry[num].RxReRingLock); */
+/* } */
- //
- // Init Mac Table
- //
-// MacTableInitialize(pAd);
+ /* */
+ /* Init Mac Table */
+ /* */
+/* MacTableInitialize(pAd); */
- //
- // Init send data structures and related parameters
- //
+ /* */
+ /* Init send data structures and related parameters */
+ /* */
Status = NICInitTransmit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
break;
- //
- // Init receive data structures and related parameters
- //
+ /* */
+ /* Init receive data structures and related parameters */
+ /* */
Status = NICInitRecv(pAd);
if (Status != NDIS_STATUS_SUCCESS)
break;
PTX_CONTEXT pNullContext = &pAd->NullContext;
PTX_CONTEXT pPsPollContext = &pAd->PsPollContext;
PTX_CONTEXT pRTSContext = &pAd->RTSContext;
-// PHT_TX_CONTEXT pHTTXContext;
- //PRTMP_REORDERBUF pReorderBuf;
+/* PHT_TX_CONTEXT pHTTXContext; */
+ /*PRTMP_REORDERBUF pReorderBuf; */
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
-// RTMP_TX_RING *pTxRing;
+/* RTMP_TX_RING *pTxRing; */
DBGPRINT(RT_DEBUG_ERROR, ("---> RTMPFreeTxRxRingMemory\n"));
pObj = pObj;
- // Free all resources for the RECEIVE buffer queue.
+ /* Free all resources for the RECEIVE buffer queue. */
for (i = 0; i < (RX_RING_SIZE); i++) {
PRX_CONTEXT pRxContext = &(pAd->RxContext[i]);
if (pRxContext)
LM_URB_FREE(pObj, pRxContext, MAX_RXBULK_SIZE);
}
- // Free PsPoll frame resource
+ /* Free PsPoll frame resource */
LM_URB_FREE(pObj, pPsPollContext, sizeof(TX_BUFFER));
- // Free NULL frame resource
+ /* Free NULL frame resource */
LM_URB_FREE(pObj, pNullContext, sizeof(TX_BUFFER));
- // Free RTS frame resource
+ /* Free RTS frame resource */
LM_URB_FREE(pObj, pRTSContext, sizeof(TX_BUFFER));
- // Free beacon frame resource
+ /* Free beacon frame resource */
for (i = 0; i < BEACON_RING_SIZE; i++) {
PTX_CONTEXT pBeaconContext = &(pAd->BeaconContext[i]);
if (pBeaconContext)
LM_URB_FREE(pObj, pBeaconContext, sizeof(TX_BUFFER));
}
- // Free mgmt frame resource
+ /* Free mgmt frame resource */
for (i = 0; i < MGMT_RING_SIZE; i++) {
PTX_CONTEXT pMLMEContext =
(PTX_CONTEXT) pAd->MgmtRing.Cell[i].AllocVa;
- //LM_URB_FREE(pObj, pMLMEContext, sizeof(TX_BUFFER));
+ /*LM_URB_FREE(pObj, pMLMEContext, sizeof(TX_BUFFER)); */
if (NULL != pAd->MgmtRing.Cell[i].pNdisPacket) {
RTMPFreeNdisPacket(pAd,
pAd->MgmtRing.Cell[i].pNdisPacket);
if (pAd->MgmtDescRing.AllocVa)
os_free_mem(pAd, pAd->MgmtDescRing.AllocVa);
- // Free Tx frame resource
+ /* Free Tx frame resource */
for (acidx = 0; acidx < 4; acidx++) {
PHT_TX_CONTEXT pHTTXContext = &(pAd->TxContext[acidx]);
if (pHTTXContext)
NdisFreeSpinLock(&pAd->MLMEBulkOutLock);
NdisFreeSpinLock(&pAd->CmdQLock);
- // Clear all pending bulk-out request flags.
+ /* Clear all pending bulk-out request flags. */
RTUSB_CLEAR_BULK_FLAG(pAd, 0xffffffff);
-// NdisFreeSpinLock(&pAd->MacTabLock);
+/* NdisFreeSpinLock(&pAd->MacTabLock); */
-// for(i=0; i<MAX_LEN_OF_BA_REC_TABLE; i++)
-// {
-// NdisFreeSpinLock(&pAd->BATable.BARecEntry[i].RxReRingLock);
-// }
+/* for(i=0; i<MAX_LEN_OF_BA_REC_TABLE; i++) */
+/* { */
+/* NdisFreeSpinLock(&pAd->BATable.BARecEntry[i].RxReRingLock); */
+/* } */
DBGPRINT(RT_DEBUG_ERROR, ("<--- RTMPFreeTxRxRingMemory\n"));
}
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
LARGE_INTEGER NOW;
- // initialize the random number generator
+ /* initialize the random number generator */
RTMP_GetCurrentSystemTime(&NOW);
if (pAd->bLocalAdminMAC != TRUE) {
pAd->CurrentAddress[4] = pAd->PermanentAddress[4];
pAd->CurrentAddress[5] = pAd->PermanentAddress[5];
}
- // Write New MAC address to MAC_CSR2 & MAC_CSR3 & let ASIC know our new MAC
+ /* Write New MAC address to MAC_CSR2 & MAC_CSR3 & let ASIC know our new MAC */
StaMacReg0.field.Byte0 = pAd->CurrentAddress[0];
StaMacReg0.field.Byte1 = pAd->CurrentAddress[1];
StaMacReg0.field.Byte2 = pAd->CurrentAddress[2];
*/
VOID RT28XXDMADisable(IN RTMP_ADAPTER * pAd)
{
- // no use
+ /* no use */
}
/*
UINT i, padding;
BEACON_SYNC_STRUCT *pBeaconSync = pAd->CommonCfg.pBeaconSync;
UINT32 longValue;
-// USHORT shortValue;
+/* USHORT shortValue; */
BOOLEAN bBcnReq = FALSE;
UCHAR bcn_idx = 0;
DBGPRINT(RT_DEBUG_ERROR, ("pBeaconSync is NULL!\n"));
return;
}
- //if ((pAd->WdsTab.Mode == WDS_BRIDGE_MODE) ||
- // ((pAd->ApCfg.MBSSID[apidx].MSSIDDev == NULL) || !(pAd->ApCfg.MBSSID[apidx].MSSIDDev->flags & IFF_UP))
- // )
+ /*if ((pAd->WdsTab.Mode == WDS_BRIDGE_MODE) || */
+ /* ((pAd->ApCfg.MBSSID[apidx].MSSIDDev == NULL) || !(pAd->ApCfg.MBSSID[apidx].MSSIDDev->flags & IFF_UP)) */
+ /* ) */
if (bBcnReq == FALSE) {
/* when the ra interface is down, do not send its beacon frame */
/* clear all zero */
NdisZeroMemory(pBeaconSync->BeaconTxWI[bcn_idx], TXWI_SIZE);
} else {
ptr = (PUCHAR) & pAd->BeaconTxWI;
- if (NdisEqualMemory(pBeaconSync->BeaconTxWI[bcn_idx], &pAd->BeaconTxWI, TXWI_SIZE) == FALSE) { // If BeaconTxWI changed, we need to rewrite the TxWI for the Beacon frames.
+ if (NdisEqualMemory(pBeaconSync->BeaconTxWI[bcn_idx], &pAd->BeaconTxWI, TXWI_SIZE) == FALSE) { /* If BeaconTxWI changed, we need to rewrite the TxWI for the Beacon frames. */
pBeaconSync->BeaconBitMap &=
(~(BEACON_BITMAP_MASK & (1 << bcn_idx)));
NdisMoveMemory(pBeaconSync->BeaconTxWI[bcn_idx],
if ((pBeaconSync->BeaconBitMap & (1 << bcn_idx)) !=
(1 << bcn_idx)) {
- for (i = 0; i < TXWI_SIZE; i += 4) // 16-byte TXWI field
+ for (i = 0; i < TXWI_SIZE; i += 4) /* 16-byte TXWI field */
{
longValue =
*ptr + (*(ptr + 1) << 8) +
for (i = 0; i < FrameLen /*HW_BEACON_OFFSET */ ; i += 2) {
if (NdisEqualMemory(ptr, pBeaconFrame, 2) == FALSE) {
NdisMoveMemory(ptr, pBeaconFrame, 2);
- //shortValue = *ptr + (*(ptr+1)<<8);
- //RTMP_IO_WRITE8(pAd, pAd->BeaconOffset[bcn_idx] + TXWI_SIZE + i, shortValue);
+ /*shortValue = *ptr + (*(ptr+1)<<8); */
+ /*RTMP_IO_WRITE8(pAd, pAd->BeaconOffset[bcn_idx] + TXWI_SIZE + i, shortValue); */
RTUSBMultiWrite(pAd,
pAd->BeaconOffset[bcn_idx] +
TXWI_SIZE + i, ptr, 2);
pBeaconSync->BeaconBitMap |= (1 << bcn_idx);
- // For AP interface, set the DtimBitOn so that we can send Bcast/Mcast frame out after this beacon frame.
+ /* For AP interface, set the DtimBitOn so that we can send Bcast/Mcast frame out after this beacon frame. */
}
}
{
int apidx;
BEACON_SYNC_STRUCT *pBeaconSync;
-// LARGE_INTEGER tsfTime, deltaTime;
+/* LARGE_INTEGER tsfTime, deltaTime; */
pBeaconSync = pAd->CommonCfg.pBeaconSync;
if (pBeaconSync && pBeaconSync->EnableBeacon) {
os_alloc_mem(pAd, (PUCHAR *) (&pAd->CommonCfg.pBeaconSync),
sizeof(BEACON_SYNC_STRUCT));
- //NdisAllocMemory(pAd->CommonCfg.pBeaconSync, sizeof(BEACON_SYNC_STRUCT), MEM_ALLOC_FLAG);
+ /*NdisAllocMemory(pAd->CommonCfg.pBeaconSync, sizeof(BEACON_SYNC_STRUCT), MEM_ALLOC_FLAG); */
if (pAd->CommonCfg.pBeaconSync) {
pBeaconSync = pAd->CommonCfg.pBeaconSync;
NdisZeroMemory(pBeaconSync, sizeof(BEACON_SYNC_STRUCT));
}
pBeaconSync->BeaconBitMap = 0;
- //RTMPInitTimer(pAd, &pAd->CommonCfg.BeaconUpdateTimer, GET_TIMER_FUNCTION(BeaconUpdateExec), pAd, TRUE);
+ /*RTMPInitTimer(pAd, &pAd->CommonCfg.BeaconUpdateTimer, GET_TIMER_FUNCTION(BeaconUpdateExec), pAd, TRUE); */
pBeaconSync->EnableBeacon = TRUE;
}
}
IN PVOID SystemSpecific2, IN PVOID SystemSpecific3)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) FunctionContext;
- LARGE_INTEGER tsfTime_a; //, tsfTime_b, deltaTime_exp, deltaTime_ab;
+ LARGE_INTEGER tsfTime_a; /*, tsfTime_b, deltaTime_exp, deltaTime_ab; */
UINT32 delta, delta2MS, period2US, remain, remain_low, remain_high;
-// BOOLEAN positive;
+/* BOOLEAN positive; */
if (pAd->CommonCfg.IsUpdateBeacon == TRUE) {
ReSyncBeaconTime(pAd);
RTMP_IO_READ32(pAd, TSF_TIMER_DW0, &tsfTime_a.u.LowPart);
RTMP_IO_READ32(pAd, TSF_TIMER_DW1, &tsfTime_a.u.HighPart);
- //positive=getDeltaTime(tsfTime_a, expectedTime, &deltaTime_exp);
+ /*positive=getDeltaTime(tsfTime_a, expectedTime, &deltaTime_exp); */
period2US = (pAd->CommonCfg.BeaconPeriod << 10);
remain_high = pAd->CommonCfg.BeaconRemain * tsfTime_a.u.HighPart;
remain_low = tsfTime_a.u.LowPart % (pAd->CommonCfg.BeaconPeriod << 10);
AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
RTMPusecDelay(10000);
}
- //NICResetFromError(pAd);
+ /*NICResetFromError(pAd); */
- // Enable Tx/Rx
+ /* Enable Tx/Rx */
RTMPEnableRxTx(pAd);
if (pChipOps->AsicReverseRfFromSleepMode)
pChipOps->AsicReverseRfFromSleepMode(pAd);
- // Clear Radio off flag
+ /* Clear Radio off flag */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
RTUSBBulkReceive(pAd);
- // Set LED
+ /* Set LED */
RTMPSetLED(pAd, LED_RADIO_ON);
}
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
return;
- // Clear PMKID cache.
+ /* Clear PMKID cache. */
pAd->StaCfg.SavedPMKNum = 0;
RTMPZeroMemory(pAd->StaCfg.SavedPMK, (PMKID_NO * sizeof(BSSID_INFO)));
- // Link down first if any association exists
+ /* Link down first if any association exists */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) {
if (INFRA_ON(pAd) || ADHOC_ON(pAd)) {
MLME_DISASSOC_REQ_STRUCT DisReq;
}
}
}
- // Set Radio off flag
+ /* Set Radio off flag */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
{
- // Link down first if any association exists
+ /* Link down first if any association exists */
if (INFRA_ON(pAd) || ADHOC_ON(pAd))
LinkDown(pAd, FALSE);
RTMPusecDelay(10000);
- //==========================================
- // Clean up old bss table
+ /*========================================== */
+ /* Clean up old bss table */
BssTableInit(&pAd->ScanTab);
}
- // Set LED
+ /* Set LED */
RTMPSetLED(pAd, LED_RADIO_OFF);
if (pAd->CommonCfg.BBPCurrentBW == BW_40) {
- // Must using 40MHz.
+ /* Must using 40MHz. */
AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel);
} else {
- // Must using 20MHz.
+ /* Must using 20MHz. */
AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
}
- // Disable Tx/Rx DMA
- RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word); // disable DMA
+ /* Disable Tx/Rx DMA */
+ RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word); /* disable DMA */
GloCfg.field.EnableTxDMA = 0;
GloCfg.field.EnableRxDMA = 0;
- RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word); // abort all TX rings
+ RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word); /* abort all TX rings */
- // Waiting for DMA idle
+ /* Waiting for DMA idle */
i = 0;
do {
RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
RTMPusecDelay(1000);
} while (i++ < 100);
- // Disable MAC Tx/Rx
+ /* Disable MAC Tx/Rx */
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= (0xfffffff3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
}
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
MsgLen));
return FALSE;
}
- // we support immediate BA.
+ /* we support immediate BA. */
*(USHORT *) (&pAddFrame->BaParm) =
cpu2le16(*(USHORT *) (&pAddFrame->BaParm));
pAddFrame->TimeOutValue = cpu2le16(pAddFrame->TimeOutValue);
pAddFrame->BaParm.AMSDUSupported));
return FALSE;
}
- // we support immediate BA.
+ /* we support immediate BA. */
if (pAddFrame->BaParm.TID & 0xfff0) {
DBGPRINT(RT_DEBUG_ERROR,
("PeerAddBAReqActionSanity: ADDBA Request incorrect TID = %d\n",
MsgLen));
return FALSE;
}
- // we support immediate BA.
+ /* we support immediate BA. */
*(USHORT *) (&pAddFrame->BaParm) =
cpu2le16(*(USHORT *) (&pAddFrame->BaParm));
pAddFrame->StatusCode = cpu2le16(pAddFrame->StatusCode);
pAddFrame->BaParm.BAPolicy));
return FALSE;
}
- // we support immediate BA.
+ /* we support immediate BA. */
if (pAddFrame->BaParm.TID & 0xfff0) {
DBGPRINT(RT_DEBUG_ERROR,
("PeerAddBARspActionSanity: ADDBA Response incorrect TID = %d\n",
BOOLEAN PeerDelBAActionSanity(IN PRTMP_ADAPTER pAd,
IN UCHAR Wcid, IN VOID * pMsg, IN ULONG MsgLen)
{
- //PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
+ /*PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg; */
PFRAME_DELBA_REQ pDelFrame;
if (MsgLen != (sizeof(FRAME_DELBA_REQ)))
return FALSE;
==========================================================================
*/
-BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULONG MsgLen, IN UCHAR MsgChannel, OUT PUCHAR pAddr2, OUT PUCHAR pBssid, OUT CHAR Ssid[], OUT UCHAR * pSsidLen, OUT UCHAR * pBssType, OUT USHORT * pBeaconPeriod, OUT UCHAR * pChannel, OUT UCHAR * pNewChannel, OUT LARGE_INTEGER * pTimestamp, OUT CF_PARM * pCfParm, OUT USHORT * pAtimWin, OUT USHORT * pCapabilityInfo, OUT UCHAR * pErp, OUT UCHAR * pDtimCount, OUT UCHAR * pDtimPeriod, OUT UCHAR * pBcastFlag, OUT UCHAR * pMessageToMe, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT UCHAR * pCkipFlag, OUT UCHAR * pAironetCellPowerLimit, OUT PEDCA_PARM pEdcaParm, OUT PQBSS_LOAD_PARM pQbssLoad, OUT PQOS_CAPABILITY_PARM pQosCapability, OUT ULONG * pRalinkIe, OUT UCHAR * pHtCapabilityLen, OUT UCHAR * pPreNHtCapabilityLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT UCHAR * AddHtInfoLen, OUT ADD_HT_INFO_IE * AddHtInfo, OUT UCHAR * NewExtChannelOffset, // Ht extension channel offset(above or below)
+BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULONG MsgLen, IN UCHAR MsgChannel, OUT PUCHAR pAddr2, OUT PUCHAR pBssid, OUT CHAR Ssid[], OUT UCHAR * pSsidLen, OUT UCHAR * pBssType, OUT USHORT * pBeaconPeriod, OUT UCHAR * pChannel, OUT UCHAR * pNewChannel, OUT LARGE_INTEGER * pTimestamp, OUT CF_PARM * pCfParm, OUT USHORT * pAtimWin, OUT USHORT * pCapabilityInfo, OUT UCHAR * pErp, OUT UCHAR * pDtimCount, OUT UCHAR * pDtimPeriod, OUT UCHAR * pBcastFlag, OUT UCHAR * pMessageToMe, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT UCHAR * pCkipFlag, OUT UCHAR * pAironetCellPowerLimit, OUT PEDCA_PARM pEdcaParm, OUT PQBSS_LOAD_PARM pQbssLoad, OUT PQOS_CAPABILITY_PARM pQosCapability, OUT ULONG * pRalinkIe, OUT UCHAR * pHtCapabilityLen, OUT UCHAR * pPreNHtCapabilityLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT UCHAR * AddHtInfoLen, OUT ADD_HT_INFO_IE * AddHtInfo, OUT UCHAR * NewExtChannelOffset, /* Ht extension channel offset(above or below) */
OUT USHORT * LengthVIE,
OUT PNDIS_802_11_VARIABLE_IEs pVIE)
{
PEID_STRUCT pEid;
UCHAR SubType;
UCHAR Sanity;
- //UCHAR ECWMin, ECWMax;
- //MAC_CSR9_STRUC Csr9;
+ /*UCHAR ECWMin, ECWMax; */
+ /*MAC_CSR9_STRUC Csr9; */
ULONG Length = 0;
- // For some 11a AP which didn't have DS_IE, we use two conditions to decide the channel
- // 1. If the AP is 11n enabled, then check the control channel.
- // 2. If the AP didn't have any info about channel, use the channel we received this frame as the channel. (May inaccuracy!!)
+ /* For some 11a AP which didn't have DS_IE, we use two conditions to decide the channel */
+ /* 1. If the AP is 11n enabled, then check the control channel. */
+ /* 2. If the AP didn't have any info about channel, use the channel we received this frame as the channel. (May inaccuracy!!) */
UCHAR CtrlChannel = 0;
- // Add for 3 necessary EID field check
+ /* Add for 3 necessary EID field check */
Sanity = 0;
*pAtimWin = 0;
*pBcastFlag = 0;
*pMessageToMe = 0;
*pExtRateLen = 0;
- *pCkipFlag = 0; // Default of CkipFlag is 0
- *pAironetCellPowerLimit = 0xFF; // Default of AironetCellPowerLimit is 0xFF
- *LengthVIE = 0; // Set the length of VIE to init value 0
- *pHtCapabilityLen = 0; // Set the length of VIE to init value 0
+ *pCkipFlag = 0; /* Default of CkipFlag is 0 */
+ *pAironetCellPowerLimit = 0xFF; /* Default of AironetCellPowerLimit is 0xFF */
+ *LengthVIE = 0; /* Set the length of VIE to init value 0 */
+ *pHtCapabilityLen = 0; /* Set the length of VIE to init value 0 */
if (pAd->OpMode == OPMODE_STA)
- *pPreNHtCapabilityLen = 0; // Set the length of VIE to init value 0
- *AddHtInfoLen = 0; // Set the length of VIE to init value 0
+ *pPreNHtCapabilityLen = 0; /* Set the length of VIE to init value 0 */
+ *AddHtInfoLen = 0; /* Set the length of VIE to init value 0 */
*pRalinkIe = 0;
*pNewChannel = 0;
- *NewExtChannelOffset = 0xff; //Default 0xff means no such IE
- pCfParm->bValid = FALSE; // default: no IE_CF found
- pQbssLoad->bValid = FALSE; // default: no IE_QBSS_LOAD found
- pEdcaParm->bValid = FALSE; // default: no IE_EDCA_PARAMETER found
- pQosCapability->bValid = FALSE; // default: no IE_QOS_CAPABILITY found
+ *NewExtChannelOffset = 0xff; /*Default 0xff means no such IE */
+ pCfParm->bValid = FALSE; /* default: no IE_CF found */
+ pQbssLoad->bValid = FALSE; /* default: no IE_QBSS_LOAD found */
+ pEdcaParm->bValid = FALSE; /* default: no IE_EDCA_PARAMETER found */
+ pQosCapability->bValid = FALSE; /* default: no IE_QOS_CAPABILITY found */
pFrame = (PFRAME_802_11) Msg;
- // get subtype from header
+ /* get subtype from header */
SubType = (UCHAR) pFrame->Hdr.FC.SubType;
- // get Addr2 and BSSID from header
+ /* get Addr2 and BSSID from header */
COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
COPY_MAC_ADDR(pBssid, pFrame->Hdr.Addr3);
Ptr = pFrame->Octet;
Length += LENGTH_802_11;
- // get timestamp from payload and advance the pointer
+ /* get timestamp from payload and advance the pointer */
NdisMoveMemory(pTimestamp, Ptr, TIMESTAMP_LEN);
pTimestamp->u.LowPart = cpu2le32(pTimestamp->u.LowPart);
Ptr += TIMESTAMP_LEN;
Length += TIMESTAMP_LEN;
- // get beacon interval from payload and advance the pointer
+ /* get beacon interval from payload and advance the pointer */
NdisMoveMemory(pBeaconPeriod, Ptr, 2);
Ptr += 2;
Length += 2;
- // get capability info from payload and advance the pointer
+ /* get capability info from payload and advance the pointer */
NdisMoveMemory(pCapabilityInfo, Ptr, 2);
Ptr += 2;
Length += 2;
pEid = (PEID_STRUCT) Ptr;
- // get variable fields from payload and advance the pointer
+ /* get variable fields from payload and advance the pointer */
while ((Length + 2 + pEid->Len) <= MsgLen) {
- //
- // Secure copy VIE to VarIE[MAX_VIE_LEN] didn't overflow.
- //
+ /* */
+ /* Secure copy VIE to VarIE[MAX_VIE_LEN] didn't overflow. */
+ /* */
if ((*LengthVIE + pEid->Len + 2) >= MAX_VIE_LEN) {
DBGPRINT(RT_DEBUG_WARN,
("PeerBeaconAndProbeRspSanity - Variable IEs out of resource [len(=%d) > MAX_VIE_LEN(=%d)]\n",
switch (pEid->Eid) {
case IE_SSID:
- // Already has one SSID EID in this beacon, ignore the second one
+ /* Already has one SSID EID in this beacon, ignore the second one */
if (Sanity & 0x1)
break;
if (pEid->Len <= MAX_LEN_OF_SSID) {
NdisMoveMemory(SupRate, pEid->Octet, pEid->Len);
*pSupRateLen = pEid->Len;
- // TODO: 2004-09-14 not a good design here, cause it exclude extra rates
- // from ScanTab. We should report as is. And filter out unsupported
- // rates in MlmeAux.
- // Check against the supported rates
- // RTMPCheckRates(pAd, SupRate, pSupRateLen);
+ /* TODO: 2004-09-14 not a good design here, cause it exclude extra rates */
+ /* from ScanTab. We should report as is. And filter out unsupported */
+ /* rates in MlmeAux. */
+ /* Check against the supported rates */
+ /* RTMPCheckRates(pAd, SupRate, pSupRateLen); */
} else {
DBGPRINT(RT_DEBUG_TRACE,
("PeerBeaconAndProbeRspSanity - wrong IE_SUPP_RATES (len=%d)\n",
break;
case IE_HT_CAP:
- if (pEid->Len >= SIZE_HT_CAP_IE) //Note: allow extension.!!
+ if (pEid->Len >= SIZE_HT_CAP_IE) /*Note: allow extension.!! */
{
NdisMoveMemory(pHtCapability, pEid->Octet,
sizeof(HT_CAPABILITY_IE));
- *pHtCapabilityLen = SIZE_HT_CAP_IE; // Nnow we only support 26 bytes.
+ *pHtCapabilityLen = SIZE_HT_CAP_IE; /* Nnow we only support 26 bytes. */
*(USHORT *) (&pHtCapability->HtCapInfo) =
cpu2le16(*(USHORT *)
(&pHtCapability->ExtHtCapInfo));
{
- *pPreNHtCapabilityLen = 0; // Nnow we only support 26 bytes.
+ *pPreNHtCapabilityLen = 0; /* Nnow we only support 26 bytes. */
Ptr = (PUCHAR) pVIE;
NdisMoveMemory(Ptr + *LengthVIE,
break;
case IE_ADD_HT:
if (pEid->Len >= sizeof(ADD_HT_INFO_IE)) {
- // This IE allows extension, but we can ignore extra bytes beyond our knowledge , so only
- // copy first sizeof(ADD_HT_INFO_IE)
+ /* This IE allows extension, but we can ignore extra bytes beyond our knowledge , so only */
+ /* copy first sizeof(ADD_HT_INFO_IE) */
NdisMoveMemory(AddHtInfo, pEid->Octet,
sizeof(ADD_HT_INFO_IE));
*AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
break;
case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
if (pEid->Len == 3) {
- *pNewChannel = pEid->Octet[1]; //extract new channel number
+ *pNewChannel = pEid->Octet[1]; /*extract new channel number */
}
break;
- // New for WPA
- // CCX v2 has the same IE, we need to parse that too
- // Wifi WMM use the same IE vale, need to parse that too
- // case IE_WPA:
+ /* New for WPA */
+ /* CCX v2 has the same IE, we need to parse that too */
+ /* Wifi WMM use the same IE vale, need to parse that too */
+ /* case IE_WPA: */
case IE_VENDOR_SPECIFIC:
- // Check Broadcom/Atheros 802.11n OUI version, for HT Capability IE.
- // This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
+ /* Check Broadcom/Atheros 802.11n OUI version, for HT Capability IE. */
+ /* This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan. */
/*if (NdisEqualMemory(pEid->Octet, BROADCOM_OUI, 3) && (pEid->Len >= 4))
{
if ((pEid->Octet[3] == OUI_BROADCOM_HT) && (pEid->Len >= 30))
}
}
*/
- // Check the OUI version, filter out non-standard usage
+ /* Check the OUI version, filter out non-standard usage */
if (NdisEqualMemory(pEid->Octet, RALINK_OUI, 3)
&& (pEid->Len == 7)) {
- //*pRalinkIe = pEid->Octet[3];
+ /**pRalinkIe = pEid->Octet[3]; */
if (pEid->Octet[3] != 0)
*pRalinkIe = pEid->Octet[3];
else
- *pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
+ *pRalinkIe = 0xf0000000; /* Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag. */
}
- // This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
+ /* This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan. */
- // Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP,
- // Check broadcom-defiend pre-802.11nD1.0 OUI for HT related IE, including HT Capatilities IE and HT Information IE
+ /* Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP, */
+ /* Check broadcom-defiend pre-802.11nD1.0 OUI for HT related IE, including HT Capatilities IE and HT Information IE */
else if ((*pHtCapabilityLen == 0)
&& NdisEqualMemory(pEid->Octet, PRE_N_HT_OUI,
3) && (pEid->Len >= 4)
*AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
}
} else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)) {
- // Copy to pVIE which will report to microsoft bssid list.
+ /* Copy to pVIE which will report to microsoft bssid list. */
Ptr = (PUCHAR) pVIE;
NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid,
pEid->Len + 2);
PUCHAR ptr;
int i;
- // parsing EDCA parameters
+ /* parsing EDCA parameters */
pEdcaParm->bValid = TRUE;
- pEdcaParm->bQAck = FALSE; // pEid->Octet[0] & 0x10;
- pEdcaParm->bQueueRequest = FALSE; // pEid->Octet[0] & 0x20;
- pEdcaParm->bTxopRequest = FALSE; // pEid->Octet[0] & 0x40;
+ pEdcaParm->bQAck = FALSE; /* pEid->Octet[0] & 0x10; */
+ pEdcaParm->bQueueRequest = FALSE; /* pEid->Octet[0] & 0x20; */
+ pEdcaParm->bTxopRequest = FALSE; /* pEid->Octet[0] & 0x40; */
pEdcaParm->EdcaUpdateCount =
pEid->Octet[6] & 0x0f;
pEdcaParm->bAPSDCapable =
(pEid->Octet[6] & 0x80) ? 1 : 0;
ptr = &pEid->Octet[8];
for (i = 0; i < 4; i++) {
- UCHAR aci = (*ptr & 0x60) >> 5; // b5~6 is AC INDEX
- pEdcaParm->bACM[aci] = (((*ptr) & 0x10) == 0x10); // b5 is ACM
- pEdcaParm->Aifsn[aci] = (*ptr) & 0x0f; // b0~3 is AIFSN
- pEdcaParm->Cwmin[aci] = *(ptr + 1) & 0x0f; // b0~4 is Cwmin
- pEdcaParm->Cwmax[aci] = *(ptr + 1) >> 4; // b5~8 is Cwmax
- pEdcaParm->Txop[aci] = *(ptr + 2) + 256 * (*(ptr + 3)); // in unit of 32-us
- ptr += 4; // point to next AC
+ UCHAR aci = (*ptr & 0x60) >> 5; /* b5~6 is AC INDEX */
+ pEdcaParm->bACM[aci] = (((*ptr) & 0x10) == 0x10); /* b5 is ACM */
+ pEdcaParm->Aifsn[aci] = (*ptr) & 0x0f; /* b0~3 is AIFSN */
+ pEdcaParm->Cwmin[aci] = *(ptr + 1) & 0x0f; /* b0~4 is Cwmin */
+ pEdcaParm->Cwmax[aci] = *(ptr + 1) >> 4; /* b5~8 is Cwmax */
+ pEdcaParm->Txop[aci] = *(ptr + 2) + 256 * (*(ptr + 3)); /* in unit of 32-us */
+ ptr += 4; /* point to next AC */
}
} else
if (NdisEqualMemory(pEid->Octet, WME_INFO_ELEM, 6)
&& (pEid->Len == 7)) {
- // parsing EDCA parameters
+ /* parsing EDCA parameters */
pEdcaParm->bValid = TRUE;
- pEdcaParm->bQAck = FALSE; // pEid->Octet[0] & 0x10;
- pEdcaParm->bQueueRequest = FALSE; // pEid->Octet[0] & 0x20;
- pEdcaParm->bTxopRequest = FALSE; // pEid->Octet[0] & 0x40;
+ pEdcaParm->bQAck = FALSE; /* pEid->Octet[0] & 0x10; */
+ pEdcaParm->bQueueRequest = FALSE; /* pEid->Octet[0] & 0x20; */
+ pEdcaParm->bTxopRequest = FALSE; /* pEid->Octet[0] & 0x40; */
pEdcaParm->EdcaUpdateCount =
pEid->Octet[6] & 0x0f;
pEdcaParm->bAPSDCapable =
(pEid->Octet[6] & 0x80) ? 1 : 0;
- // use default EDCA parameter
+ /* use default EDCA parameter */
pEdcaParm->bACM[QID_AC_BE] = 0;
pEdcaParm->Aifsn[QID_AC_BE] = 3;
pEdcaParm->Cwmin[QID_AC_BE] = CW_MIN_IN_BITS;
pEdcaParm->Cwmin[QID_AC_VI] =
CW_MIN_IN_BITS - 1;
pEdcaParm->Cwmax[QID_AC_VI] = CW_MAX_IN_BITS;
- pEdcaParm->Txop[QID_AC_VI] = 96; // AC_VI: 96*32us ~= 3ms
+ pEdcaParm->Txop[QID_AC_VI] = 96; /* AC_VI: 96*32us ~= 3ms */
pEdcaParm->bACM[QID_AC_VO] = 0;
pEdcaParm->Aifsn[QID_AC_VO] = 2;
CW_MIN_IN_BITS - 2;
pEdcaParm->Cwmax[QID_AC_VO] =
CW_MAX_IN_BITS - 1;
- pEdcaParm->Txop[QID_AC_VO] = 48; // AC_VO: 48*32us ~= 1.5ms
+ pEdcaParm->Txop[QID_AC_VO] = 48; /* AC_VO: 48*32us ~= 1.5ms */
}
break;
NdisMoveMemory(ExtRate, pEid->Octet, pEid->Len);
*pExtRateLen = pEid->Len;
- // TODO: 2004-09-14 not a good design here, cause it exclude extra rates
- // from ScanTab. We should report as is. And filter out unsupported
- // rates in MlmeAux.
- // Check against the supported rates
- // RTMPCheckRates(pAd, ExtRate, pExtRateLen);
+ /* TODO: 2004-09-14 not a good design here, cause it exclude extra rates */
+ /* from ScanTab. We should report as is. And filter out unsupported */
+ /* rates in MlmeAux. */
+ /* Check against the supported rates */
+ /* RTMPCheckRates(pAd, ExtRate, pExtRateLen); */
}
break;
break;
case IE_AIRONET_CKIP:
- // 0. Check Aironet IE length, it must be larger or equal to 28
- // Cisco AP350 used length as 28
- // Cisco AP12XX used length as 30
+ /* 0. Check Aironet IE length, it must be larger or equal to 28 */
+ /* Cisco AP350 used length as 28 */
+ /* Cisco AP12XX used length as 30 */
if (pEid->Len < (CKIP_NEGOTIATION_LENGTH - 2))
break;
- // 1. Copy CKIP flag byte to buffer for process
+ /* 1. Copy CKIP flag byte to buffer for process */
*pCkipFlag = *(pEid->Octet + 8);
break;
case IE_AP_TX_POWER:
- // AP Control of Client Transmit Power
- //0. Check Aironet IE length, it must be 6
+ /* AP Control of Client Transmit Power */
+ /*0. Check Aironet IE length, it must be 6 */
if (pEid->Len != 0x06)
break;
- // Get cell power limit in dBm
+ /* Get cell power limit in dBm */
if (NdisEqualMemory(pEid->Octet, CISCO_OUI, 3) == 1)
*pAironetCellPowerLimit = *(pEid->Octet + 4);
break;
- // WPA2 & 802.11i RSN
+ /* WPA2 & 802.11i RSN */
case IE_RSN:
- // There is no OUI for version anymore, check the group cipher OUI before copying
+ /* There is no OUI for version anymore, check the group cipher OUI before copying */
if (RTMPEqualMemory(pEid->Octet + 2, RSN_OUI, 3)) {
- // Copy to pVIE which will report to microsoft bssid list.
+ /* Copy to pVIE which will report to microsoft bssid list. */
Ptr = (PUCHAR) pVIE;
NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid,
pEid->Len + 2);
break;
}
- Length = Length + 2 + pEid->Len; // Eid[1] + Len[1]+ content[Len]
+ Length = Length + 2 + pEid->Len; /* Eid[1] + Len[1]+ content[Len] */
pEid = (PEID_STRUCT) ((UCHAR *) pEid + 2 + pEid->Len);
}
- // For some 11a AP. it did not have the channel EID, patch here
+ /* For some 11a AP. it did not have the channel EID, patch here */
{
UCHAR LatchRfChannel = MsgChannel;
if ((pAd->LatchRfRegs.Channel > 14) && ((Sanity & 0x4) == 0)) {
}
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
UCHAR ChannelSanity(IN PRTMP_ADAPTER pAd, IN UCHAR channel)
{
int i;
MLME_ASSOC_REQ_STRUCT *pInfo;
pInfo = (MLME_ASSOC_REQ_STRUCT *) Msg;
- *pTimeout = pInfo->Timeout; // timeout
- COPY_MAC_ADDR(pApAddr, pInfo->Addr); // AP address
- *pCapabilityInfo = pInfo->CapabilityInfo; // capability info
+ *pTimeout = pInfo->Timeout; /* timeout */
+ COPY_MAC_ADDR(pApAddr, pInfo->Addr); /* AP address */
+ *pCapabilityInfo = pInfo->CapabilityInfo; /* capability info */
*pListenIntv = pInfo->ListenIntv;
return TRUE;
NetWorkType = Ndis802_11DS;
if (pBss->Channel <= 14) {
- //
- // First check support Rate.
- //
+ /* */
+ /* First check support Rate. */
+ /* */
for (i = 0; i < pBss->SupRateLen; i++) {
- rate = pBss->SupRate[i] & 0x7f; // Mask out basic rate set bit
+ rate = pBss->SupRate[i] & 0x7f; /* Mask out basic rate set bit */
if ((rate == 2) || (rate == 4) || (rate == 11)
|| (rate == 22)) {
continue;
} else {
- //
- // Otherwise (even rate > 108) means Ndis802_11OFDM24
- //
+ /* */
+ /* Otherwise (even rate > 108) means Ndis802_11OFDM24 */
+ /* */
NetWorkType = Ndis802_11OFDM24;
break;
}
}
- //
- // Second check Extend Rate.
- //
+ /* */
+ /* Second check Extend Rate. */
+ /* */
if (NetWorkType != Ndis802_11OFDM24) {
for (i = 0; i < pBss->ExtRateLen; i++) {
- rate = pBss->SupRate[i] & 0x7f; // Mask out basic rate set bit
+ rate = pBss->SupRate[i] & 0x7f; /* Mask out basic rate set bit */
if ((rate == 2) || (rate == 4) || (rate == 11)
|| (rate == 22)) {
continue;
} else {
- //
- // Otherwise (even rate > 108) means Ndis802_11OFDM24
- //
+ /* */
+ /* Otherwise (even rate > 108) means Ndis802_11OFDM24 */
+ /* */
NetWorkType = Ndis802_11OFDM24;
break;
}
*((USHORT *) & EapolKeyInfo) = cpu2le16(*((USHORT *) & EapolKeyInfo));
- // Choose WPA2 or not
+ /* Choose WPA2 or not */
if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2)
|| (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
bWPA2 = TRUE;
- // 0. Check MsgType
+ /* 0. Check MsgType */
if ((MsgType > EAPOL_GROUP_MSG_2) || (MsgType < EAPOL_PAIR_MSG_1)) {
DBGPRINT(RT_DEBUG_ERROR,
("The message type is invalid(%d)! \n", MsgType));
return FALSE;
}
- // 1. Replay counter check
- if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1) // For supplicant
+ /* 1. Replay counter check */
+ if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1) /* For supplicant */
{
- // First validate replay counter, only accept message with larger replay counter.
- // Let equal pass, some AP start with all zero replay counter
+ /* First validate replay counter, only accept message with larger replay counter. */
+ /* Let equal pass, some AP start with all zero replay counter */
UCHAR ZeroReplay[LEN_KEY_DESC_REPLAY];
NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
LEN_KEY_DESC_REPLAY) != 0)) {
bReplayDiff = TRUE;
}
- } else if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2) // For authenticator
+ } else if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2) /* For authenticator */
{
- // check Replay Counter coresponds to MSG from authenticator, otherwise discard
+ /* check Replay Counter coresponds to MSG from authenticator, otherwise discard */
if (!NdisEqualMemory
(pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter,
LEN_KEY_DESC_REPLAY)) {
bReplayDiff = TRUE;
}
}
- // Replay Counter different condition
+ /* Replay Counter different condition */
if (bReplayDiff) {
- // send wireless event - for replay counter different
+ /* send wireless event - for replay counter different */
if (pAd->CommonCfg.bWirelessEvent)
RTMPSendWirelessEvent(pAd,
IW_REPLAY_COUNTER_DIFF_EVENT_FLAG,
LEN_KEY_DESC_REPLAY);
return FALSE;
}
- // 2. Verify MIC except Pairwise Msg1
+ /* 2. Verify MIC except Pairwise Msg1 */
if (MsgType != EAPOL_PAIR_MSG_1) {
UCHAR rcvd_mic[LEN_KEY_DESC_MIC];
- // Record the received MIC for check later
+ /* Record the received MIC for check later */
NdisMoveMemory(rcvd_mic, pMsg->KeyDesc.KeyMic,
LEN_KEY_DESC_MIC);
NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
- if (EapolKeyInfo.KeyDescVer == DESC_TYPE_TKIP) // TKIP
+ if (EapolKeyInfo.KeyDescVer == DESC_TYPE_TKIP) /* TKIP */
{
HMAC_MD5(pEntry->PTK, LEN_EAP_MICK, (PUCHAR) pMsg,
MsgLen, mic, MD5_DIGEST_SIZE);
- } else if (EapolKeyInfo.KeyDescVer == DESC_TYPE_AES) // AES
+ } else if (EapolKeyInfo.KeyDescVer == DESC_TYPE_AES) /* AES */
{
HMAC_SHA1(pEntry->PTK, LEN_EAP_MICK, (PUCHAR) pMsg,
MsgLen, digest, SHA1_DIGEST_SIZE);
}
if (!NdisEqualMemory(rcvd_mic, mic, LEN_KEY_DESC_MIC)) {
- // send wireless event - for MIC different
+ /* send wireless event - for MIC different */
if (pAd->CommonCfg.bWirelessEvent)
RTMPSendWirelessEvent(pAd,
IW_MIC_DIFF_EVENT_FLAG,
return FALSE;
}
}
- // 1. Decrypt the Key Data field if GTK is included.
- // 2. Extract the context of the Key Data field if it exist.
- // The field in pairwise_msg_2_WPA1(WPA2) & pairwise_msg_3_WPA1 is clear.
- // The field in group_msg_1_WPA1(WPA2) & pairwise_msg_3_WPA2 is encrypted.
+ /* 1. Decrypt the Key Data field if GTK is included. */
+ /* 2. Extract the context of the Key Data field if it exist. */
+ /* The field in pairwise_msg_2_WPA1(WPA2) & pairwise_msg_3_WPA1 is clear. */
+ /* The field in group_msg_1_WPA1(WPA2) & pairwise_msg_3_WPA2 is encrypted. */
if (CONV_ARRARY_TO_UINT16(pMsg->KeyDesc.KeyDataLen) > 0) {
- // Decrypt this field
+ /* Decrypt this field */
if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2)
|| (MsgType == EAPOL_GROUP_MSG_1)) {
if ((EapolKeyInfo.KeyDescVer == DESC_TYPE_AES)) {
- // AES
+ /* AES */
AES_GTK_KEY_UNWRAP(&pEntry->PTK[16], KEYDATA,
CONV_ARRARY_TO_UINT16(pMsg->
KeyDesc.
} else {
INT i;
UCHAR Key[32];
- // Decrypt TKIP GTK
- // Construct 32 bytes RC4 Key
+ /* Decrypt TKIP GTK */
+ /* Construct 32 bytes RC4 Key */
NdisMoveMemory(Key, pMsg->KeyDesc.KeyIv, 16);
NdisMoveMemory(&Key[16], &pEntry->PTK[16], 16);
ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, Key,
32);
- //discard first 256 bytes
+ /*discard first 256 bytes */
for (i = 0; i < 256; i++)
ARCFOUR_BYTE(&pAd->PrivateInfo.
WEPCONTEXT);
- // Decrypt GTK. Becareful, there is no ICV to check the result is correct or not
+ /* Decrypt GTK. Becareful, there is no ICV to check the result is correct or not */
ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT,
KEYDATA, pMsg->KeyDesc.KeyData,
CONV_ARRARY_TO_UINT16(pMsg->
return TRUE;
}
- // Parse Key Data field to
- // 1. verify RSN IE for pairwise_msg_2_WPA1(WPA2) ,pairwise_msg_3_WPA1(WPA2)
- // 2. verify KDE format for pairwise_msg_3_WPA2, group_msg_1_WPA2
- // 3. update shared key for pairwise_msg_3_WPA2, group_msg_1_WPA1(WPA2)
+ /* Parse Key Data field to */
+ /* 1. verify RSN IE for pairwise_msg_2_WPA1(WPA2) ,pairwise_msg_3_WPA1(WPA2) */
+ /* 2. verify KDE format for pairwise_msg_3_WPA2, group_msg_1_WPA2 */
+ /* 3. update shared key for pairwise_msg_3_WPA2, group_msg_1_WPA1(WPA2) */
if (!RTMPParseEapolKeyData(pAd, KEYDATA,
CONV_ARRARY_TO_UINT16(pMsg->KeyDesc.
KeyDataLen),
*/
#include "../rt_config.h"
-// 2.4 Ghz channel plan index in the TxPower arrays.
-#define BG_BAND_REGION_0_START 0 // 1,2,3,4,5,6,7,8,9,10,11
+/* 2.4 Ghz channel plan index in the TxPower arrays. */
+#define BG_BAND_REGION_0_START 0 /* 1,2,3,4,5,6,7,8,9,10,11 */
#define BG_BAND_REGION_0_SIZE 11
-#define BG_BAND_REGION_1_START 0 // 1,2,3,4,5,6,7,8,9,10,11,12,13
+#define BG_BAND_REGION_1_START 0 /* 1,2,3,4,5,6,7,8,9,10,11,12,13 */
#define BG_BAND_REGION_1_SIZE 13
-#define BG_BAND_REGION_2_START 9 // 10,11
+#define BG_BAND_REGION_2_START 9 /* 10,11 */
#define BG_BAND_REGION_2_SIZE 2
-#define BG_BAND_REGION_3_START 9 // 10,11,12,13
+#define BG_BAND_REGION_3_START 9 /* 10,11,12,13 */
#define BG_BAND_REGION_3_SIZE 4
-#define BG_BAND_REGION_4_START 13 // 14
+#define BG_BAND_REGION_4_START 13 /* 14 */
#define BG_BAND_REGION_4_SIZE 1
-#define BG_BAND_REGION_5_START 0 // 1,2,3,4,5,6,7,8,9,10,11,12,13,14
+#define BG_BAND_REGION_5_START 0 /* 1,2,3,4,5,6,7,8,9,10,11,12,13,14 */
#define BG_BAND_REGION_5_SIZE 14
-#define BG_BAND_REGION_6_START 2 // 3,4,5,6,7,8,9
+#define BG_BAND_REGION_6_START 2 /* 3,4,5,6,7,8,9 */
#define BG_BAND_REGION_6_SIZE 7
-#define BG_BAND_REGION_7_START 4 // 5,6,7,8,9,10,11,12,13
+#define BG_BAND_REGION_7_START 4 /* 5,6,7,8,9,10,11,12,13 */
#define BG_BAND_REGION_7_SIZE 9
-#define BG_BAND_REGION_31_START 0 // 1,2,3,4,5,6,7,8,9,10,11,12,13,14
+#define BG_BAND_REGION_31_START 0 /* 1,2,3,4,5,6,7,8,9,10,11,12,13,14 */
#define BG_BAND_REGION_31_SIZE 14
-// 5 Ghz channel plan index in the TxPower arrays.
+/* 5 Ghz channel plan index in the TxPower arrays. */
UCHAR A_BAND_REGION_0_CHANNEL_LIST[] =
{ 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 };
UCHAR A_BAND_REGION_1_CHANNEL_LIST[] =
153, 157, 161, 165 };
UCHAR A_BAND_REGION_15_CHANNEL_LIST[] = { 149, 153, 157, 161, 165, 169, 173 };
-//BaSizeArray follows the 802.11n definition as MaxRxFactor. 2^(13+factor) bytes. When factor =0, it's about Ba buffer size =8.
+/*BaSizeArray follows the 802.11n definition as MaxRxFactor. 2^(13+factor) bytes. When factor =0, it's about Ba buffer size =8. */
UCHAR BaSizeArray[4] = { 8, 16, 32, 64 };
/*
NdisZeroMemory(pAd->ChannelList,
MAX_NUM_OF_CHANNELS * sizeof(CHANNEL_TX_POWER));
- // if not 11a-only mode, channel list starts from 2.4Ghz band
+ /* if not 11a-only mode, channel list starts from 2.4Ghz band */
if ((pAd->CommonCfg.PhyMode != PHY_11A)
&& (pAd->CommonCfg.PhyMode != PHY_11AN_MIXED)
&& (pAd->CommonCfg.PhyMode != PHY_11N_5G)
) {
switch (pAd->CommonCfg.CountryRegion & 0x7f) {
- case REGION_0_BG_BAND: // 1 -11
+ case REGION_0_BG_BAND: /* 1 -11 */
NdisMoveMemory(&pAd->ChannelList[index],
&pAd->TxPower[BG_BAND_REGION_0_START],
sizeof(CHANNEL_TX_POWER) *
BG_BAND_REGION_0_SIZE);
index += BG_BAND_REGION_0_SIZE;
break;
- case REGION_1_BG_BAND: // 1 - 13
+ case REGION_1_BG_BAND: /* 1 - 13 */
NdisMoveMemory(&pAd->ChannelList[index],
&pAd->TxPower[BG_BAND_REGION_1_START],
sizeof(CHANNEL_TX_POWER) *
BG_BAND_REGION_1_SIZE);
index += BG_BAND_REGION_1_SIZE;
break;
- case REGION_2_BG_BAND: // 10 - 11
+ case REGION_2_BG_BAND: /* 10 - 11 */
NdisMoveMemory(&pAd->ChannelList[index],
&pAd->TxPower[BG_BAND_REGION_2_START],
sizeof(CHANNEL_TX_POWER) *
BG_BAND_REGION_2_SIZE);
index += BG_BAND_REGION_2_SIZE;
break;
- case REGION_3_BG_BAND: // 10 - 13
+ case REGION_3_BG_BAND: /* 10 - 13 */
NdisMoveMemory(&pAd->ChannelList[index],
&pAd->TxPower[BG_BAND_REGION_3_START],
sizeof(CHANNEL_TX_POWER) *
BG_BAND_REGION_3_SIZE);
index += BG_BAND_REGION_3_SIZE;
break;
- case REGION_4_BG_BAND: // 14
+ case REGION_4_BG_BAND: /* 14 */
NdisMoveMemory(&pAd->ChannelList[index],
&pAd->TxPower[BG_BAND_REGION_4_START],
sizeof(CHANNEL_TX_POWER) *
BG_BAND_REGION_4_SIZE);
index += BG_BAND_REGION_4_SIZE;
break;
- case REGION_5_BG_BAND: // 1 - 14
+ case REGION_5_BG_BAND: /* 1 - 14 */
NdisMoveMemory(&pAd->ChannelList[index],
&pAd->TxPower[BG_BAND_REGION_5_START],
sizeof(CHANNEL_TX_POWER) *
BG_BAND_REGION_5_SIZE);
index += BG_BAND_REGION_5_SIZE;
break;
- case REGION_6_BG_BAND: // 3 - 9
+ case REGION_6_BG_BAND: /* 3 - 9 */
NdisMoveMemory(&pAd->ChannelList[index],
&pAd->TxPower[BG_BAND_REGION_6_START],
sizeof(CHANNEL_TX_POWER) *
BG_BAND_REGION_6_SIZE);
index += BG_BAND_REGION_6_SIZE;
break;
- case REGION_7_BG_BAND: // 5 - 13
+ case REGION_7_BG_BAND: /* 5 - 13 */
NdisMoveMemory(&pAd->ChannelList[index],
&pAd->TxPower[BG_BAND_REGION_7_START],
sizeof(CHANNEL_TX_POWER) *
BG_BAND_REGION_7_SIZE);
index += BG_BAND_REGION_7_SIZE;
break;
- case REGION_31_BG_BAND: // 1 - 14
+ case REGION_31_BG_BAND: /* 1 - 14 */
NdisMoveMemory(&pAd->ChannelList[index],
&pAd->TxPower[BG_BAND_REGION_31_START],
sizeof(CHANNEL_TX_POWER) *
BG_BAND_REGION_31_SIZE);
index += BG_BAND_REGION_31_SIZE;
break;
- default: // Error. should never happen
+ default: /* Error. should never happen */
break;
}
for (i = 0; i < index; i++)
sizeof(UCHAR);
pChannelList = A_BAND_REGION_15_CHANNEL_LIST;
break;
- default: // Error. should never happen
+ default: /* Error. should never happen */
DBGPRINT(RT_DEBUG_WARN,
("countryregion=%d not support",
pAd->CommonCfg.CountryRegionForABand));
VOID ChangeToCellPowerLimit(IN PRTMP_ADAPTER pAd,
IN UCHAR AironetCellPowerLimit)
{
- //valud 0xFF means that hasn't found power limit information
- //from the AP's Beacon/Probe response.
+ /*valud 0xFF means that hasn't found power limit information */
+ /*from the AP's Beacon/Probe response. */
if (AironetCellPowerLimit == 0xFF)
return;
- if (AironetCellPowerLimit < 6) //Used Lowest Power Percentage.
+ if (AironetCellPowerLimit < 6) /*Used Lowest Power Percentage. */
pAd->CommonCfg.TxPowerPercentage = 6;
else if (AironetCellPowerLimit < 9)
pAd->CommonCfg.TxPowerPercentage = 10;
else if (AironetCellPowerLimit < 15)
pAd->CommonCfg.TxPowerPercentage = 75;
else
- pAd->CommonCfg.TxPowerPercentage = 100; //else used maximum
+ pAd->CommonCfg.TxPowerPercentage = 100; /*else used maximum */
if (pAd->CommonCfg.TxPowerPercentage > pAd->CommonCfg.TxPowerDefault)
pAd->CommonCfg.TxPowerPercentage =
{
UCHAR RssiOffset, LNAGain;
- // Rssi equals to zero should be an invalid value
+ /* Rssi equals to zero should be an invalid value */
if (Rssi == 0)
return -99;
}
{
- //
- // To prevent data lost.
- // Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
- // Now, we need to send an NULL data with turned PSM bit off to AP, when scan progress done
- //
+ /* */
+ /* To prevent data lost. */
+ /* Send an NULL data with turned PSM bit on to current associated AP before SCAN progress. */
+ /* Now, we need to send an NULL data with turned PSM bit off to AP, when scan progress done */
+ /* */
if (OPSTATUS_TEST_FLAG
(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
&& (INFRA_ON(pAd))) {
pHdr80211->FC.PwrMgmt =
(pAd->StaCfg.Psm == PWR_SAVE);
- // Send using priority queue
+ /* Send using priority queue */
MiniportMMRequest(pAd, 0, pOutBuffer,
sizeof
(HEADER_802_11));
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
else {
{
- // BBP and RF are not accessible in PS mode, we has to wake them up first
+ /* BBP and RF are not accessible in PS mode, we has to wake them up first */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, TRUE);
- // leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
+ /* leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON */
if (pAd->StaCfg.Psm == PWR_SAVE)
RTMP_SET_PSM_BIT(pAd, PWR_ACTIVE);
}
}
}
- //Global country domain(ch1-11:active scan, ch12-14 passive scan)
+ /*Global country domain(ch1-11:active scan, ch12-14 passive scan) */
if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12)
&& ((pAd->CommonCfg.CountryRegion & 0x7f) ==
REGION_31_BG_BAND)) {
ScanType = SCAN_PASSIVE;
}
- // We need to shorten active scan time in order for WZC connect issue
- // Chnage the channel scan time for CISCO stuff based on its IAPP announcement
+ /* We need to shorten active scan time in order for WZC connect issue */
+ /* Chnage the channel scan time for CISCO stuff based on its IAPP announcement */
if (ScanType == FAST_SCAN_ACTIVE)
RTMPSetTimer(&pAd->MlmeAux.ScanTimer,
FAST_ACTIVE_SCAN_TIME);
- else // must be SCAN_PASSIVE or SCAN_ACTIVE
+ else /* must be SCAN_PASSIVE or SCAN_ACTIVE */
{
if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED)
if ((ScanType == SCAN_ACTIVE)
|| (ScanType == FAST_SCAN_ACTIVE)
) {
- NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("SYNC - ScanNextChannel() allocate memory fail\n"));
return;
}
- // There is no need to send broadcast probe request if active scan is in effect.
+ /* There is no need to send broadcast probe request if active scan is in effect. */
if ((ScanType == SCAN_ACTIVE)
|| (ScanType == FAST_SCAN_ACTIVE)
)
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer);
}
- // For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
+ /* For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse */
pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
}
#include "../rt_config.h"
-// Rotation functions on 32 bit values
+/* Rotation functions on 32 bit values */
#define ROL32( A, n ) \
( ((A) << (n)) | ( ((A)>>(32-(n))) & ( (1UL << (n)) - 1 ) ) )
#define ROR32( A, n ) ROL32( (A), 32-(n) )
0x82, 0x29, 0x5A, 0x1E, 0x7B, 0xA8, 0x6D, 0x2C
};
-//
-// Expanded IV for TKIP function.
-//
+/* */
+/* Expanded IV for TKIP function. */
+/* */
typedef struct PACKED _IV_CONTROL_ {
union PACKED {
struct PACKED {
*/
VOID RTMPTkipSetMICKey(IN PTKIP_KEY_INFO pTkip, IN PUCHAR pMICKey)
{
- // Set the key
+ /* Set the key */
pTkip->K0 = RTMPTkipGetUInt32(pMICKey);
pTkip->K1 = RTMPTkipGetUInt32(pMICKey + 4);
- // and reset the message
+ /* and reset the message */
pTkip->L = pTkip->K0;
pTkip->R = pTkip->K1;
pTkip->nBytesInM = 0;
*/
VOID RTMPTkipAppendByte(IN PTKIP_KEY_INFO pTkip, IN UCHAR uChar)
{
- // Append the byte to our word-sized buffer
+ /* Append the byte to our word-sized buffer */
pTkip->M |= (uChar << (8 * pTkip->nBytesInM));
pTkip->nBytesInM++;
- // Process the word if it is full.
+ /* Process the word if it is full. */
if (pTkip->nBytesInM >= 4) {
pTkip->L ^= pTkip->M;
pTkip->R ^= ROL32(pTkip->L, 17);
pTkip->L += pTkip->R;
pTkip->R ^= ROR32(pTkip->L, 2);
pTkip->L += pTkip->R;
- // Clear the buffer
+ /* Clear the buffer */
pTkip->M = 0;
pTkip->nBytesInM = 0;
}
*/
VOID RTMPTkipAppend(IN PTKIP_KEY_INFO pTkip, IN PUCHAR pSrc, IN UINT nBytes)
{
- // This is simple
+ /* This is simple */
while (nBytes > 0) {
RTMPTkipAppendByte(pTkip, *pSrc++);
nBytes--;
*/
VOID RTMPTkipGetMIC(IN PTKIP_KEY_INFO pTkip)
{
- // Append the minimum padding
+ /* Append the minimum padding */
RTMPTkipAppendByte(pTkip, 0x5a);
RTMPTkipAppendByte(pTkip, 0);
RTMPTkipAppendByte(pTkip, 0);
RTMPTkipAppendByte(pTkip, 0);
RTMPTkipAppendByte(pTkip, 0);
- // and then zeroes until the length is a multiple of 4
+ /* and then zeroes until the length is a multiple of 4 */
while (pTkip->nBytesInM != 0) {
RTMPTkipAppendByte(pTkip, 0);
}
- // The appendByte function has already computed the result.
+ /* The appendByte function has already computed the result. */
RTMPTkipPutUInt32(pTkip->MIC, pTkip->L);
RTMPTkipPutUInt32(pTkip->MIC + 4, pTkip->R);
}
{
TKIP_IV tkipIv;
- // Prepare 8 bytes TKIP encapsulation for MPDU
+ /* Prepare 8 bytes TKIP encapsulation for MPDU */
NdisZeroMemory(&tkipIv, sizeof(TKIP_IV));
tkipIv.IV16.field.rc0 = *(pTSC + 1);
tkipIv.IV16.field.rc1 = (tkipIv.IV16.field.rc0 | 0x20) & 0x7f;
tkipIv.IV16.field.rc2 = *pTSC;
- tkipIv.IV16.field.CONTROL.field.ExtIV = 1; // 0: non-extended IV, 1: an extended IV
+ tkipIv.IV16.field.CONTROL.field.ExtIV = 1; /* 0: non-extended IV, 1: an extended IV */
tkipIv.IV16.field.CONTROL.field.KeyID = KeyId;
-// tkipIv.IV32 = *(PULONG)(pTSC + 2);
- NdisMoveMemory(&tkipIv.IV32, (pTSC + 2), 4); // Copy IV
+/* tkipIv.IV32 = *(PULONG)(pTSC + 2); */
+ NdisMoveMemory(&tkipIv.IV32, (pTSC + 2), 4); /* Copy IV */
*pIV16 = tkipIv.IV16.word;
*pIV32 = tkipIv.IV32;
{
ULONG Priority = UserPriority;
- // Init MIC value calculation
+ /* Init MIC value calculation */
RTMPTkipSetMICKey(&pAd->PrivateInfo.Tx, pMICKey);
- // DA
+ /* DA */
RTMPTkipAppend(&pAd->PrivateInfo.Tx, pDA, MAC_ADDR_LEN);
- // SA
+ /* SA */
RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSA, MAC_ADDR_LEN);
- // Priority + 3 bytes of 0
+ /* Priority + 3 bytes of 0 */
RTMPTkipAppend(&pAd->PrivateInfo.Tx, (PUCHAR) & Priority, 4);
}
UCHAR OldMic[8];
ULONG Priority = UserPriority;
- // Init MIC value calculation
+ /* Init MIC value calculation */
RTMPTkipSetMICKey(&pAd->PrivateInfo.Rx, pMICKey);
- // DA
+ /* DA */
RTMPTkipAppend(&pAd->PrivateInfo.Rx, pDA, MAC_ADDR_LEN);
- // SA
+ /* SA */
RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSA, MAC_ADDR_LEN);
- // Priority + 3 bytes of 0
+ /* Priority + 3 bytes of 0 */
RTMPTkipAppend(&pAd->PrivateInfo.Rx, (PUCHAR) & Priority, 4);
- // Calculate MIC value from plain text data
+ /* Calculate MIC value from plain text data */
RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSrc, Len);
- // Get MIC valude from received frame
+ /* Get MIC valude from received frame */
NdisMoveMemory(OldMic, pSrc + Len, 8);
- // Get MIC value from decrypted plain data
+ /* Get MIC value from decrypted plain data */
RTMPTkipGetMIC(&pAd->PrivateInfo.Rx);
- // Move MIC value from MSDU, this steps should move to data path.
- // Since the MIC value might cross MPDUs.
+ /* Move MIC value from MSDU, this steps should move to data path. */
+ /* Since the MIC value might cross MPDUs. */
if (!NdisEqualMemory(pAd->PrivateInfo.Rx.MIC, OldMic, 8)) {
- DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTMPTkipCompareMICValue(): TKIP MIC Error !\n")); //MIC error.
+ DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTMPTkipCompareMICValue(): TKIP MIC Error !\n")); /*MIC error. */
return (FALSE);
}
UserPriority = RTMP_GET_PACKET_UP(pPacket);
pSrc = pSrcBufVA;
- // determine if this is a vlan packet
+ /* determine if this is a vlan packet */
if (((*(pSrc + 12) << 8) + *(pSrc + 13)) == 0x8100)
vlan_offset = 4;
}
if (pEncap != NULL) {
- // LLC encapsulation
+ /* LLC encapsulation */
RTMPTkipAppend(&pAd->PrivateInfo.Tx, pEncap, 6);
- // Protocol Type
+ /* Protocol Type */
RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSrc + 12 + vlan_offset,
2);
}
RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSrc, SrcBufLen);
}
- break; // No need handle next packet
+ break; /* No need handle next packet */
- } while (TRUE); // End of copying payload
+ } while (TRUE); /* End of copying payload */
- // Compute the final MIC Value
+ /* Compute the final MIC Value */
RTMPTkipGetMIC(&pAd->PrivateInfo.Tx);
}
rc4key[15] = (ppk5 >> 8) % 256;
}
-//
-// TRUE: Success!
-// FALSE: Decrypt Error!
-//
+/* */
+/* TRUE: Success! */
+/* FALSE: Decrypt Error! */
+/* */
BOOLEAN RTMPSoftDecryptTKIP(IN PRTMP_ADAPTER pAd,
IN PUCHAR pData,
IN ULONG DataByteCnt,
UCHAR DA[MAC_ADDR_LEN];
UCHAR SA[MAC_ADDR_LEN];
UCHAR RC4Key[16];
- UINT p1k[5]; //for mix_key;
+ UINT p1k[5]; /*for mix_key; */
ULONG pnl; /* Least significant 16 bits of PN */
ULONG pnh; /* Most significant 32 bits of PN */
UINT num_blocks;
if (to_ds == 0 && from_ds == 1) {
NdisMoveMemory(DA, pData + 4, MAC_ADDR_LEN);
NdisMoveMemory(SA, pData + 16, MAC_ADDR_LEN);
- NdisMoveMemory(TA, pData + 10, MAC_ADDR_LEN); //BSSID
+ NdisMoveMemory(TA, pData + 10, MAC_ADDR_LEN); /*BSSID */
} else if (to_ds == 0 && from_ds == 0) {
NdisMoveMemory(TA, pData + 10, MAC_ADDR_LEN);
NdisMoveMemory(DA, pData + 4, MAC_ADDR_LEN);
ARCFOUR_DECRYPT(&ArcFourContext, pData + HeaderLen,
pData + HeaderLen + 8, DataByteCnt - HeaderLen - 8);
NdisMoveMemory(&trailfcs, pData + DataByteCnt - 8 - 4, 4);
- crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pData + HeaderLen, DataByteCnt - HeaderLen - 8 - 4); //Skip IV+EIV 8 bytes & Skip last 4 bytes(FCS).
+ crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pData + HeaderLen, DataByteCnt - HeaderLen - 8 - 4); /*Skip IV+EIV 8 bytes & Skip last 4 bytes(FCS). */
crc32 ^= 0xffffffff; /* complement */
if (crc32 != cpu2le32(trailfcs)) {
- DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptTKIP, WEP Data ICV Error !\n")); //ICV error.
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptTKIP, WEP Data ICV Error !\n")); /*ICV error. */
return (FALSE);
}
NdisMoveMemory(MIC, pAd->PrivateInfo.Tx.MIC, 8);
if (!NdisEqualMemory(MIC, TrailMIC, 8)) {
- DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptTKIP, WEP Data MIC Error !\n")); //MIC error.
- //RTMPReportMicError(pAd, &pWpaKey[KeyID]); // marked by AlbertY @ 20060630
+ DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptTKIP, WEP Data MIC Error !\n")); /*MIC error. */
+ /*RTMPReportMicError(pAd, &pWpaKey[KeyID]); // marked by AlbertY @ 20060630 */
return (FALSE);
}
- //DBGPRINT(RT_DEBUG_TRACE, "RTMPSoftDecryptTKIP Decript done!!\n");
+ /*DBGPRINT(RT_DEBUG_TRACE, "RTMPSoftDecryptTKIP Decript done!!\n"); */
return TRUE;
}
{
UINT i;
UCHAR WEPKEY[] = {
- //IV
+ /*IV */
0x00, 0x11, 0x22,
- //WEP KEY
+ /*WEP KEY */
0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99,
0xAA, 0xBB, 0xCC
};
- pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32; //Init crc32.
+ pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32; /*Init crc32. */
{
NdisMoveMemory(WEPKEY + 3, pKey, KeyLen);
for (i = 0; i < 3; i++)
- WEPKEY[i] = RandomByte(pAd); //Call mlme RandomByte() function.
- ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, WEPKEY, KeyLen + 3); //INIT SBOX, KEYLEN+3(IV)
+ WEPKEY[i] = RandomByte(pAd); /*Call mlme RandomByte() function. */
+ ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, WEPKEY, KeyLen + 3); /*INIT SBOX, KEYLEN+3(IV) */
- NdisMoveMemory(pDest, WEPKEY, 3); //Append Init Vector
+ NdisMoveMemory(pDest, WEPKEY, 3); /*Append Init Vector */
}
- *(pDest + 3) = (KeyId << 6); //Append KEYID
+ *(pDest + 3) = (KeyId << 6); /*Append KEYID */
}
UINT crc32;
UCHAR KeyIdx;
UCHAR WEPKEY[] = {
- //IV
+ /*IV */
0x00, 0x11, 0x22,
- //WEP KEY
+ /*WEP KEY */
0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99,
0xAA, 0xBB, 0xCC
};
UCHAR *pPayload = (UCHAR *) pData + LENGTH_802_11;
ULONG payload_len = DataByteCnt - LENGTH_802_11;
- NdisMoveMemory(WEPKEY, pPayload, 3); //Get WEP IV
+ NdisMoveMemory(WEPKEY, pPayload, 3); /*Get WEP IV */
KeyIdx = (*(pPayload + 3) & 0xc0) >> 6;
if (pGroupKey[KeyIdx].KeyLen == 0)
ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, pPayload, pPayload + 4,
payload_len - 4);
NdisMoveMemory(&trailfcs, pPayload + payload_len - 8, 4);
- crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pPayload, payload_len - 8); //Skip last 4 bytes(FCS).
+ crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pPayload, payload_len - 8); /*Skip last 4 bytes(FCS). */
crc32 ^= 0xffffffff; /* complement */
if (crc32 != cpu2le32(trailfcs)) {
- DBGPRINT(RT_DEBUG_TRACE, ("! WEP Data CRC Error !\n")); //CRC error.
+ DBGPRINT(RT_DEBUG_TRACE, ("! WEP Data CRC Error !\n")); /*CRC error. */
return (FALSE);
}
return (TRUE);
IN PUCHAR pDest, IN PUCHAR pSrc, IN UINT Len)
{
UINT i;
- //discard first 256 bytes
+ /*discard first 256 bytes */
for (i = 0; i < 256; i++)
ARCFOUR_BYTE(Ctx);
Paul Lin 03-11-28 Modify for supplicant
*/
#include "../rt_config.h"
-// WPA OUI
+/* WPA OUI */
UCHAR OUI_WPA_NONE_AKM[4] = { 0x00, 0x50, 0xF2, 0x00 };
UCHAR OUI_WPA_VERSION[4] = { 0x00, 0x50, 0xF2, 0x01 };
UCHAR OUI_WPA_WEP40[4] = { 0x00, 0x50, 0xF2, 0x01 };
UCHAR OUI_WPA_8021X_AKM[4] = { 0x00, 0x50, 0xF2, 0x01 };
UCHAR OUI_WPA_PSK_AKM[4] = { 0x00, 0x50, 0xF2, 0x02 };
-// WPA2 OUI
+/* WPA2 OUI */
UCHAR OUI_WPA2_WEP40[4] = { 0x00, 0x0F, 0xAC, 0x01 };
UCHAR OUI_WPA2_TKIP[4] = { 0x00, 0x0F, 0xAC, 0x02 };
UCHAR OUI_WPA2_CCMP[4] = { 0x00, 0x0F, 0xAC, 0x04 };
pHeader = (PHEADER_802_11) Elem->Msg;
- //For normaol PSK, we enqueue an EAPOL-Start command to trigger the process.
+ /*For normaol PSK, we enqueue an EAPOL-Start command to trigger the process. */
if (Elem->MsgLen == 6)
pEntry = MacTableLookup(pAd, Elem->Msg);
else {
("Key descripter does not match with WPA rule\n"));
break;
}
- // The value 1 shall be used for all EAPOL-Key frames to and from a STA when
- // neither the group nor pairwise ciphers are CCMP for Key Descriptor 1.
+ /* The value 1 shall be used for all EAPOL-Key frames to and from a STA when */
+ /* neither the group nor pairwise ciphers are CCMP for Key Descriptor 1. */
if ((pEntry->WepStatus == Ndis802_11Encryption2Enabled)
&& (peerKeyInfo.KeyDescVer != DESC_TYPE_TKIP)) {
DBGPRINT(RT_DEBUG_ERROR,
("Key descripter version not match(TKIP) \n"));
break;
}
- // The value 2 shall be used for all EAPOL-Key frames to and from a STA when
- // either the pairwise or the group cipher is AES-CCMP for Key Descriptor 2.
+ /* The value 2 shall be used for all EAPOL-Key frames to and from a STA when */
+ /* either the pairwise or the group cipher is AES-CCMP for Key Descriptor 2. */
else if ((pEntry->WepStatus == Ndis802_11Encryption3Enabled)
&& (peerKeyInfo.KeyDescVer != DESC_TYPE_AES)) {
DBGPRINT(RT_DEBUG_ERROR,
("Key descripter version not match(AES) \n"));
break;
}
- // Check if this STA is in class 3 state and the WPA state is started
+ /* Check if this STA is in class 3 state and the WPA state is started */
if ((pEntry->Sst == SST_ASSOC)
&& (pEntry->WpaState >= AS_INITPSK)) {
- // Check the Key Ack (bit 7) of the Key Information to determine the Authenticator
- // or not.
- // An EAPOL-Key frame that is sent by the Supplicant in response to an EAPOL-
- // Key frame from the Authenticator must not have the Ack bit set.
+ /* Check the Key Ack (bit 7) of the Key Information to determine the Authenticator */
+ /* or not. */
+ /* An EAPOL-Key frame that is sent by the Supplicant in response to an EAPOL- */
+ /* Key frame from the Authenticator must not have the Ack bit set. */
if (peerKeyInfo.KeyAck == 1) {
- // The frame is snet by Authenticator.
- // So the Supplicant side shall handle this.
+ /* The frame is snet by Authenticator. */
+ /* So the Supplicant side shall handle this. */
if ((peerKeyInfo.Secure == 0)
&& (peerKeyInfo.Request == 0)
&& (peerKeyInfo.Error == 0)
&& (peerKeyInfo.KeyType == PAIRWISEKEY)) {
- // Process 1. the message 1 of 4-way HS in WPA or WPA2
- // EAPOL-Key(0,0,1,0,P,0,0,ANonce,0,DataKD_M1)
- // 2. the message 3 of 4-way HS in WPA
- // EAPOL-Key(0,1,1,1,P,0,KeyRSC,ANonce,MIC,DataKD_M3)
+ /* Process 1. the message 1 of 4-way HS in WPA or WPA2 */
+ /* EAPOL-Key(0,0,1,0,P,0,0,ANonce,0,DataKD_M1) */
+ /* 2. the message 3 of 4-way HS in WPA */
+ /* EAPOL-Key(0,1,1,1,P,0,KeyRSC,ANonce,MIC,DataKD_M3) */
if (peerKeyInfo.KeyMic == 0)
PeerPairMsg1Action(pAd, pEntry,
Elem);
&& (peerKeyInfo.KeyMic == 1)
&& (peerKeyInfo.Request == 0)
&& (peerKeyInfo.Error == 0)) {
- // Process 1. the message 3 of 4-way HS in WPA2
- // EAPOL-Key(1,1,1,1,P,0,KeyRSC,ANonce,MIC,DataKD_M3)
- // 2. the message 1 of group KS in WPA or WPA2
- // EAPOL-Key(1,1,1,0,G,0,Key RSC,0, MIC,GTK[N])
+ /* Process 1. the message 3 of 4-way HS in WPA2 */
+ /* EAPOL-Key(1,1,1,1,P,0,KeyRSC,ANonce,MIC,DataKD_M3) */
+ /* 2. the message 1 of group KS in WPA or WPA2 */
+ /* EAPOL-Key(1,1,1,0,G,0,Key RSC,0, MIC,GTK[N]) */
if (peerKeyInfo.KeyType == PAIRWISEKEY)
PeerPairMsg3Action(pAd, pEntry,
Elem);
Elem);
}
} else {
- // The frame is snet by Supplicant.
- // So the Authenticator side shall handle this.
+ /* The frame is snet by Supplicant. */
+ /* So the Authenticator side shall handle this. */
if ((peerKeyInfo.Request == 0) &&
(peerKeyInfo.Error == 0) &&
(peerKeyInfo.KeyMic == 1)) {
if (peerKeyInfo.Secure == 0
&& peerKeyInfo.KeyType ==
PAIRWISEKEY) {
- // EAPOL-Key(0,1,0,0,P,0,0,SNonce,MIC,Data)
- // Process 1. message 2 of 4-way HS in WPA or WPA2
- // 2. message 4 of 4-way HS in WPA
+ /* EAPOL-Key(0,1,0,0,P,0,0,SNonce,MIC,Data) */
+ /* Process 1. message 2 of 4-way HS in WPA or WPA2 */
+ /* 2. message 4 of 4-way HS in WPA */
if (CONV_ARRARY_TO_UINT16
(pEapol_packet->KeyDesc.
KeyDataLen) == 0) {
} else if (peerKeyInfo.Secure == 1
&& peerKeyInfo.KeyType ==
PAIRWISEKEY) {
- // EAPOL-Key(1,1,0,0,P,0,0,0,MIC,0)
- // Process message 4 of 4-way HS in WPA2
+ /* EAPOL-Key(1,1,0,0,P,0,0,0,MIC,0) */
+ /* Process message 4 of 4-way HS in WPA2 */
PeerPairMsg4Action(pAd, pEntry,
Elem);
} else if (peerKeyInfo.Secure == 1
&& peerKeyInfo.KeyType ==
GROUPKEY) {
- // EAPOL-Key(1,1,0,0,G,0,0,0,MIC,0)
- // Process message 2 of Group key HS in WPA or WPA2
+ /* EAPOL-Key(1,1,0,0,G,0,0,0,MIC,0) */
+ /* Process message 2 of Group key HS in WPA or WPA2 */
PeerGroupMsg2Action(pAd, pEntry,
&Elem->
Msg
return;
do {
- // build a NDIS packet
+ /* build a NDIS packet */
Status =
RTMPAllocateNdisPacket(pAd, &pPacket, pHeader802_3, HdrLen,
pData, DataLen);
{
RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
- RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPacket, MAIN_MBSSID); // set a default value
+ RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPacket, MAIN_MBSSID); /* set a default value */
if (pEntry->apidx != 0)
RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPacket,
pEntry->
}
{
- // send out the packet
+ /* send out the packet */
Status = STASendPacket(pAd, pPacket);
if (Status == NDIS_STATUS_SUCCESS) {
UCHAR Index;
- // Dequeue one frame from TxSwQueue0..3 queue and process it
- // There are three place calling dequeue for TX ring.
- // 1. Here, right after queueing the frame.
- // 2. At the end of TxRingTxDone service routine.
- // 3. Upon NDIS call RTMPSendPackets
+ /* Dequeue one frame from TxSwQueue0..3 queue and process it */
+ /* There are three place calling dequeue for TX ring. */
+ /* 1. Here, right after queueing the frame. */
+ /* 2. At the end of TxRingTxDone service routine. */
+ /* 3. Upon NDIS call RTMPSendPackets */
if ((!RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
&&
("[ERROR]WPAStart4WayHS : No corresponding Authenticator.\n"));
return;
}
- // Check the status
+ /* Check the status */
if ((pEntry->WpaState > AS_PTKSTART) || (pEntry->WpaState < AS_INITPMK)) {
DBGPRINT(RT_DEBUG_ERROR,
("[ERROR]WPAStart4WayHS : Not expect calling\n"));
return;
}
- // Increment replay counter by 1
+ /* Increment replay counter by 1 */
ADD_ONE_To_64BIT_VAR(pEntry->R_Counter);
- // Randomly generate ANonce
+ /* Randomly generate ANonce */
GenRandom(pAd, (UCHAR *) pBssid, pEntry->ANonce);
- // Construct EAPoL message - Pairwise Msg 1
- // EAPOL-Key(0,0,1,0,P,0,0,ANonce,0,DataKD_M1)
+ /* Construct EAPoL message - Pairwise Msg 1 */
+ /* EAPOL-Key(0,0,1,0,P,0,0,ANonce,0,DataKD_M1) */
NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
- ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_1, 0, // Default key index
- pEntry->ANonce, NULL, // TxRSC
- NULL, // GTK
- NULL, // RSNIE
- 0, // RSNIE length
+ ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_1, 0, /* Default key index */
+ pEntry->ANonce, NULL, /* TxRSC */
+ NULL, /* GTK */
+ NULL, /* RSNIE */
+ 0, /* RSNIE length */
&EAPOLPKT);
- // Make outgoing frame
+ /* Make outgoing frame */
MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pBssid, EAPOL);
RTMPToWirelessSta(pAd, pEntry, Header802_3,
LENGTH_802_3, (PUCHAR) & EAPOLPKT,
(pEntry->PortSecured ==
WPA_802_1X_PORT_SECURED) ? FALSE : TRUE);
- // Trigger Retry Timer
+ /* Trigger Retry Timer */
RTMPModTimer(&pEntry->RetryTimer, TimeInterval);
- // Update State
+ /* Update State */
pEntry->WpaState = AS_PTKSTART;
DBGPRINT(RT_DEBUG_TRACE,
rsnie_len = pAd->StaCfg.RSNIE_Len;
}
- // Store the received frame
+ /* Store the received frame */
pMsg1 = (PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
- // Sanity Check peer Pairwise message 1 - Replay Counter
+ /* Sanity Check peer Pairwise message 1 - Replay Counter */
if (PeerWpaMessageSanity(pAd, pMsg1, MsgLen, EAPOL_PAIR_MSG_1, pEntry)
== FALSE)
return;
- // Store Replay counter, it will use to verify message 3 and construct message 2
+ /* Store Replay counter, it will use to verify message 3 and construct message 2 */
NdisMoveMemory(pEntry->R_Counter, pMsg1->KeyDesc.ReplayCounter,
LEN_KEY_DESC_REPLAY);
- // Store ANonce
+ /* Store ANonce */
NdisMoveMemory(pEntry->ANonce, pMsg1->KeyDesc.KeyNonce,
LEN_KEY_DESC_NONCE);
- // Generate random SNonce
+ /* Generate random SNonce */
GenRandom(pAd, (UCHAR *) pCurrentAddr, pEntry->SNonce);
{
- // Calculate PTK(ANonce, SNonce)
+ /* Calculate PTK(ANonce, SNonce) */
WpaDerivePTK(pAd,
pmk_ptr,
pEntry->ANonce,
pEntry->Addr,
pEntry->SNonce, pCurrentAddr, PTK, LEN_PTK);
- // Save key to PTK entry
+ /* Save key to PTK entry */
NdisMoveMemory(pEntry->PTK, PTK, LEN_PTK);
}
- // Update WpaState
+ /* Update WpaState */
pEntry->WpaState = AS_PTKINIT_NEGOTIATING;
- // Construct EAPoL message - Pairwise Msg 2
- // EAPOL-Key(0,1,0,0,P,0,0,SNonce,MIC,DataKD_M2)
+ /* Construct EAPoL message - Pairwise Msg 2 */
+ /* EAPOL-Key(0,1,0,0,P,0,0,SNonce,MIC,DataKD_M2) */
NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
- ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_2, 0, // DefaultKeyIdx
- pEntry->SNonce, NULL, // TxRsc
- NULL, // GTK
+ ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_2, 0, /* DefaultKeyIdx */
+ pEntry->SNonce, NULL, /* TxRsc */
+ NULL, /* GTK */
(UCHAR *) rsnie_ptr, rsnie_len, &EAPOLPKT);
- // Make outgoing frame
+ /* Make outgoing frame */
MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pCurrentAddr, EAPOL);
RTMPToWirelessSta(pAd, pEntry,
sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE - 2))
return;
- // check Entry in valid State
+ /* check Entry in valid State */
if (pEntry->WpaState < AS_PTKSTART)
return;
- // pointer to 802.11 header
+ /* pointer to 802.11 header */
pHeader = (PHEADER_802_11) Elem->Msg;
- // skip 802.11_header(24-byte) and LLC_header(8)
+ /* skip 802.11_header(24-byte) and LLC_header(8) */
pMsg2 = (PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
- // Store SNonce
+ /* Store SNonce */
NdisMoveMemory(pEntry->SNonce, pMsg2->KeyDesc.KeyNonce,
LEN_KEY_DESC_NONCE);
{
- // Derive PTK
- WpaDerivePTK(pAd, (UCHAR *) pmk_ptr, pEntry->ANonce, // ANONCE
- (UCHAR *) pBssid, pEntry->SNonce, // SNONCE
+ /* Derive PTK */
+ WpaDerivePTK(pAd, (UCHAR *) pmk_ptr, pEntry->ANonce, /* ANONCE */
+ (UCHAR *) pBssid, pEntry->SNonce, /* SNONCE */
pEntry->Addr, PTK, LEN_PTK);
NdisMoveMemory(pEntry->PTK, PTK, LEN_PTK);
}
- // Sanity Check peer Pairwise message 2 - Replay Counter, MIC, RSNIE
+ /* Sanity Check peer Pairwise message 2 - Replay Counter, MIC, RSNIE */
if (PeerWpaMessageSanity(pAd, pMsg2, MsgLen, EAPOL_PAIR_MSG_2, pEntry)
== FALSE)
return;
do {
- // delete retry timer
+ /* delete retry timer */
RTMPCancelTimer(&pEntry->RetryTimer, &Cancelled);
- // Change state
+ /* Change state */
pEntry->WpaState = AS_PTKINIT_NEGOTIATING;
- // Increment replay counter by 1
+ /* Increment replay counter by 1 */
ADD_ONE_To_64BIT_VAR(pEntry->R_Counter);
- // Construct EAPoL message - Pairwise Msg 3
+ /* Construct EAPoL message - Pairwise Msg 3 */
NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
ConstructEapolMsg(pEntry,
group_cipher,
(UCHAR *) gtk_ptr,
(UCHAR *) rsnie_ptr, rsnie_len, &EAPOLPKT);
- // Make outgoing frame
+ /* Make outgoing frame */
MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pBssid, EAPOL);
RTMPToWirelessSta(pAd, pEntry, Header802_3, LENGTH_802_3,
(PUCHAR) & EAPOLPKT,
pEntry->ReTryCounter = PEER_MSG3_RETRY_TIMER_CTR;
RTMPSetTimer(&pEntry->RetryTimer, PEER_MSG3_RETRY_EXEC_INTV);
- // Update State
+ /* Update State */
pEntry->WpaState = AS_PTKINIT_NEGOTIATING;
} while (FALSE);
}
- // Record 802.11 header & the received EAPOL packet Msg3
+ /* Record 802.11 header & the received EAPOL packet Msg3 */
pHeader = (PHEADER_802_11) Elem->Msg;
pMsg3 = (PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
- // Sanity Check peer Pairwise message 3 - Replay Counter, MIC, RSNIE
+ /* Sanity Check peer Pairwise message 3 - Replay Counter, MIC, RSNIE */
if (PeerWpaMessageSanity(pAd, pMsg3, MsgLen, EAPOL_PAIR_MSG_3, pEntry)
== FALSE)
return;
- // Save Replay counter, it will use construct message 4
+ /* Save Replay counter, it will use construct message 4 */
NdisMoveMemory(pEntry->R_Counter, pMsg3->KeyDesc.ReplayCounter,
LEN_KEY_DESC_REPLAY);
- // Double check ANonce
+ /* Double check ANonce */
if (!NdisEqualMemory
(pEntry->ANonce, pMsg3->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE)) {
return;
}
- // Construct EAPoL message - Pairwise Msg 4
+ /* Construct EAPoL message - Pairwise Msg 4 */
NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
- ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_4, 0, // group key index not used in message 4
- NULL, // Nonce not used in message 4
- NULL, // TxRSC not used in message 4
- NULL, // GTK not used in message 4
- NULL, // RSN IE not used in message 4
+ ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_4, 0, /* group key index not used in message 4 */
+ NULL, /* Nonce not used in message 4 */
+ NULL, /* TxRSC not used in message 4 */
+ NULL, /* GTK not used in message 4 */
+ NULL, /* RSN IE not used in message 4 */
0, &EAPOLPKT);
- // Update WpaState
+ /* Update WpaState */
pEntry->WpaState = AS_PTKINITDONE;
- // Update pairwise key
+ /* Update pairwise key */
{
PCIPHER_KEY pSharedKey;
NdisMoveMemory(pAd->StaCfg.PTK, pEntry->PTK, LEN_PTK);
- // Prepare pair-wise key information into shared key table
+ /* Prepare pair-wise key information into shared key table */
NdisZeroMemory(pSharedKey, sizeof(CIPHER_KEY));
pSharedKey->KeyLen = LEN_TKIP_EK;
NdisMoveMemory(pSharedKey->Key, &pAd->StaCfg.PTK[32],
&pAd->StaCfg.PTK[48 + LEN_TKIP_RXMICK],
LEN_TKIP_TXMICK);
- // Decide its ChiperAlg
+ /* Decide its ChiperAlg */
if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
pSharedKey->CipherAlg = CIPHER_TKIP;
else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
else
pSharedKey->CipherAlg = CIPHER_NONE;
- // Update these related information to MAC_TABLE_ENTRY
+ /* Update these related information to MAC_TABLE_ENTRY */
pEntry = &pAd->MacTab.Content[BSSID_WCID];
NdisMoveMemory(pEntry->PairwiseKey.Key, &pAd->StaCfg.PTK[32],
LEN_TKIP_EK);
LEN_TKIP_TXMICK);
pEntry->PairwiseKey.CipherAlg = pSharedKey->CipherAlg;
- // Update pairwise key information to ASIC Shared Key Table
+ /* Update pairwise key information to ASIC Shared Key Table */
AsicAddSharedKeyEntry(pAd,
BSS0,
0,
pSharedKey->Key,
pSharedKey->TxMic, pSharedKey->RxMic);
- // Update ASIC WCID attribute table and IVEIV table
+ /* Update ASIC WCID attribute table and IVEIV table */
RTMPAddWcidAttributeEntry(pAd,
BSS0,
0, pSharedKey->CipherAlg, pEntry);
}
- // open 802.1x port control and privacy filter
+ /* open 802.1x port control and privacy filter */
if (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK ||
pEntry->AuthMode == Ndis802_11AuthModeWPA2) {
pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
STA_PORT_SECURED(pAd);
- // Indicate Connected for GUI
+ /* Indicate Connected for GUI */
pAd->IndicateMediaState = NdisMediaStateConnected;
DBGPRINT(RT_DEBUG_TRACE,
("PeerPairMsg3Action: AuthMode(%s) PairwiseCipher(%s) GroupCipher(%s) \n",
} else {
}
- // Init 802.3 header and send out
+ /* Init 802.3 header and send out */
MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pCurrentAddr, EAPOL);
RTMPToWirelessSta(pAd, pEntry,
Header802_3, sizeof(Header802_3),
if (pEntry->WpaState < AS_PTKINIT_NEGOTIATING)
break;
- // pointer to 802.11 header
+ /* pointer to 802.11 header */
pHeader = (PHEADER_802_11) Elem->Msg;
- // skip 802.11_header(24-byte) and LLC_header(8)
+ /* skip 802.11_header(24-byte) and LLC_header(8) */
pMsg4 =
(PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
- // Sanity Check peer Pairwise message 4 - Replay Counter, MIC
+ /* Sanity Check peer Pairwise message 4 - Replay Counter, MIC */
if (PeerWpaMessageSanity
(pAd, pMsg4, MsgLen, EAPOL_PAIR_MSG_4, pEntry) == FALSE)
break;
- // 3. uses the MLME.SETKEYS.request to configure PTK into MAC
+ /* 3. uses the MLME.SETKEYS.request to configure PTK into MAC */
NdisZeroMemory(&pEntry->PairwiseKey, sizeof(CIPHER_KEY));
- // reset IVEIV in Asic
+ /* reset IVEIV in Asic */
AsicUpdateWCIDIVEIV(pAd, pEntry->Aid, 1, 0);
pEntry->PairwiseKey.KeyLen = LEN_TKIP_EK;
&pEntry->PTK[TKIP_AP_TXMICK_OFFSET],
LEN_TKIP_TXMICK);
- // Set pairwise key to Asic
+ /* Set pairwise key to Asic */
{
pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
if (pEntry->WepStatus == Ndis802_11Encryption2Enabled)
Ndis802_11Encryption3Enabled)
pEntry->PairwiseKey.CipherAlg = CIPHER_AES;
- // Add Pair-wise key to Asic
+ /* Add Pair-wise key to Asic */
AsicAddPairwiseKeyEntry(pAd,
pEntry->Addr,
(UCHAR) pEntry->Aid,
&pEntry->PairwiseKey);
- // update WCID attribute table and IVEIV table for this entry
+ /* update WCID attribute table and IVEIV table for this entry */
RTMPAddWcidAttributeEntry(pAd,
pEntry->apidx,
0,
pEntry);
}
- // 4. upgrade state
+ /* 4. upgrade state */
pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
pEntry->WpaState = AS_PTKINITDONE;
pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
pEntry->GTKState = REKEY_ESTABLISHED;
RTMPCancelTimer(&pEntry->RetryTimer, &Cancelled);
- // send wireless event - for set key done WPA2
+ /* send wireless event - for set key done WPA2 */
if (pAd->CommonCfg.bWirelessEvent)
RTMPSendWirelessEvent(pAd,
IW_SET_KEY_DONE_WPA2_EVENT_FLAG,
GetEncryptType(pEntry->WepStatus),
group_cipher, GetEncryptType(group_cipher)));
} else {
- // 5. init Group 2-way handshake if necessary.
+ /* 5. init Group 2-way handshake if necessary. */
WPAStart2WayGroupHS(pAd, pEntry);
pEntry->ReTryCounter = GROUP_MSG1_RETRY_TIMER_CTR;
return;
do {
- // Increment replay counter by 1
+ /* Increment replay counter by 1 */
ADD_ONE_To_64BIT_VAR(pEntry->R_Counter);
- // Construct EAPoL message - Group Msg 1
+ /* Construct EAPoL message - Group Msg 1 */
NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
ConstructEapolMsg(pEntry,
group_cipher,
(UCHAR *) gnonce_ptr,
TxTsc, (UCHAR *) gtk_ptr, NULL, 0, &EAPOLPKT);
- // Make outgoing frame
+ /* Make outgoing frame */
MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pBssid, EAPOL);
RTMPToWirelessSta(pAd, pEntry,
Header802_3, LENGTH_802_3,
default_key = pAd->StaCfg.DefaultKeyId;
}
- // Process Group Message 1 frame. skip 802.11 header(24) & LLC_SNAP header(8)
+ /* Process Group Message 1 frame. skip 802.11 header(24) & LLC_SNAP header(8) */
pGroup = (PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
- // Sanity Check peer group message 1 - Replay Counter, MIC, RSNIE
+ /* Sanity Check peer group message 1 - Replay Counter, MIC, RSNIE */
if (PeerWpaMessageSanity(pAd, pGroup, MsgLen, EAPOL_GROUP_MSG_1, pEntry)
== FALSE)
return;
- // delete retry timer
+ /* delete retry timer */
RTMPCancelTimer(&pEntry->RetryTimer, &Cancelled);
- // Save Replay counter, it will use to construct message 2
+ /* Save Replay counter, it will use to construct message 2 */
NdisMoveMemory(pEntry->R_Counter, pGroup->KeyDesc.ReplayCounter,
LEN_KEY_DESC_REPLAY);
- // Construct EAPoL message - Group Msg 2
+ /* Construct EAPoL message - Group Msg 2 */
NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
- ConstructEapolMsg(pEntry, group_cipher, EAPOL_GROUP_MSG_2, default_key, NULL, // Nonce not used
- NULL, // TxRSC not used
- NULL, // GTK not used
- NULL, // RSN IE not used
+ ConstructEapolMsg(pEntry, group_cipher, EAPOL_GROUP_MSG_2, default_key, NULL, /* Nonce not used */
+ NULL, /* TxRSC not used */
+ NULL, /* GTK not used */
+ NULL, /* RSN IE not used */
0, &EAPOLPKT);
- // open 802.1x port control and privacy filter
+ /* open 802.1x port control and privacy filter */
pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
STA_PORT_SECURED(pAd);
- // Indicate Connected for GUI
+ /* Indicate Connected for GUI */
pAd->IndicateMediaState = NdisMediaStateConnected;
DBGPRINT(RT_DEBUG_TRACE,
GetEncryptType(pEntry->WepStatus),
GetEncryptType(group_cipher)));
- // init header and Fill Packet and send Msg 2 to authenticator
+ /* init header and Fill Packet and send Msg 2 to authenticator */
MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pCurrentAddr, EAPOL);
RTMPToWirelessSta(pAd, pEntry,
Header802_3, sizeof(Header802_3),
pMsg2 = (PEAPOL_PACKET) (pData + LENGTH_802_1_H);
Len = MsgLen - LENGTH_802_1_H;
- // Sanity Check peer group message 2 - Replay Counter, MIC
+ /* Sanity Check peer group message 2 - Replay Counter, MIC */
if (PeerWpaMessageSanity
(pAd, pMsg2, Len, EAPOL_GROUP_MSG_2, pEntry) == FALSE)
break;
- // 3. upgrade state
+ /* 3. upgrade state */
RTMPCancelTimer(&pEntry->RetryTimer, &Cancelled);
pEntry->GTKState = REKEY_ESTABLISHED;
if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2)
|| (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK)) {
- // send wireless event - for set key done WPA2
+ /* send wireless event - for set key done WPA2 */
if (pAd->CommonCfg.bWirelessEvent)
RTMPSendWirelessEvent(pAd,
IW_SET_KEY_DONE_WPA2_EVENT_FLAG,
GetEncryptType(pEntry->WepStatus),
group_cipher, GetEncryptType(group_cipher)));
} else {
- // send wireless event - for set key done WPA
+ /* send wireless event - for set key done WPA */
if (pAd->CommonCfg.bWirelessEvent)
RTMPSendWirelessEvent(pAd,
IW_SET_KEY_DONE_WPA1_EVENT_FLAG,
INT currentindex = 0;
INT total_len;
- // Allocate memory for input
+ /* Allocate memory for input */
os_alloc_mem(NULL, (PUCHAR *) & input, 1024);
if (input == NULL) {
DBGPRINT(RT_DEBUG_ERROR, ("!!!PRF: no memory!!!\n"));
return;
}
- // Generate concatenation input
+ /* Generate concatenation input */
NdisMoveMemory(input, prefix, prefix_len);
- // Concatenate a single octet containing 0
+ /* Concatenate a single octet containing 0 */
input[prefix_len] = 0;
- // Concatenate specific data
+ /* Concatenate specific data */
NdisMoveMemory(&input[prefix_len + 1], data, data_len);
total_len = prefix_len + 1 + data_len;
- // Concatenate a single octet containing 0
- // This octet shall be update later
+ /* Concatenate a single octet containing 0 */
+ /* This octet shall be update later */
input[total_len] = 0;
total_len++;
- // Iterate to calculate the result by hmac-sha-1
- // Then concatenate to last result
+ /* Iterate to calculate the result by hmac-sha-1 */
+ /* Then concatenate to last result */
for (i = 0; i < (len + 19) / 20; i++) {
HMAC_SHA1(key, key_len, input, total_len, &output[currentindex],
SHA1_DIGEST_SIZE);
currentindex += 20;
- // update the last octet
+ /* update the last octet */
input[total_len - 1]++;
}
os_free_mem(NULL, input);
digest[ssidlength + 1] = (unsigned char)((count >> 16) & 0xff);
digest[ssidlength + 2] = (unsigned char)((count >> 8) & 0xff);
digest[ssidlength + 3] = (unsigned char)(count & 0xff);
- HMAC_SHA1((unsigned char *)password, (int)strlen(password), digest, ssidlength + 4, digest1, SHA1_DIGEST_SIZE); // for WPA update
+ HMAC_SHA1((unsigned char *)password, (int)strlen(password), digest, ssidlength + 4, digest1, SHA1_DIGEST_SIZE); /* for WPA update */
/* output = U1 */
memcpy(output, digest1, SHA1_DIGEST_SIZE);
for (i = 1; i < iterations; i++) {
/* Un = PRF(P, Un-1) */
- HMAC_SHA1((unsigned char *)password, (int)strlen(password), digest1, SHA1_DIGEST_SIZE, digest, SHA1_DIGEST_SIZE); // for WPA update
+ HMAC_SHA1((unsigned char *)password, (int)strlen(password), digest1, SHA1_DIGEST_SIZE, digest, SHA1_DIGEST_SIZE); /* for WPA update */
memcpy(digest1, digest, SHA1_DIGEST_SIZE);
/* output = output xor Un */
'e', 'x', 'p', 'a', 'n', 's', 'i', 'o', 'n'
};
- // initiate the concatenation input
+ /* initiate the concatenation input */
NdisZeroMemory(temp, sizeof(temp));
NdisZeroMemory(concatenation, 76);
- // Get smaller address
+ /* Get smaller address */
if (RTMPCompareMemory(SA, AA, 6) == 1)
NdisMoveMemory(concatenation, AA, 6);
else
NdisMoveMemory(concatenation, SA, 6);
CurrPos += 6;
- // Get larger address
+ /* Get larger address */
if (RTMPCompareMemory(SA, AA, 6) == 1)
NdisMoveMemory(&concatenation[CurrPos], SA, 6);
else
NdisMoveMemory(&concatenation[CurrPos], AA, 6);
- // store the larger mac address for backward compatible of
- // ralink proprietary STA-key issue
+ /* store the larger mac address for backward compatible of */
+ /* ralink proprietary STA-key issue */
NdisMoveMemory(temp, &concatenation[CurrPos], MAC_ADDR_LEN);
CurrPos += 6;
- // Get smaller Nonce
+ /* Get smaller Nonce */
if (RTMPCompareMemory(ANonce, SNonce, 32) == 0)
- NdisMoveMemory(&concatenation[CurrPos], temp, 32); // patch for ralink proprietary STA-key issue
+ NdisMoveMemory(&concatenation[CurrPos], temp, 32); /* patch for ralink proprietary STA-key issue */
else if (RTMPCompareMemory(ANonce, SNonce, 32) == 1)
NdisMoveMemory(&concatenation[CurrPos], SNonce, 32);
else
NdisMoveMemory(&concatenation[CurrPos], ANonce, 32);
CurrPos += 32;
- // Get larger Nonce
+ /* Get larger Nonce */
if (RTMPCompareMemory(ANonce, SNonce, 32) == 0)
- NdisMoveMemory(&concatenation[CurrPos], temp, 32); // patch for ralink proprietary STA-key issue
+ NdisMoveMemory(&concatenation[CurrPos], temp, 32); /* patch for ralink proprietary STA-key issue */
else if (RTMPCompareMemory(ANonce, SNonce, 32) == 1)
NdisMoveMemory(&concatenation[CurrPos], ANonce, 32);
else
hex_dump("concatenation=", concatenation, 76);
- // Use PRF to generate PTK
+ /* Use PRF to generate PTK */
PRF(PMK, LEN_MASTER_KEY, Prefix, 22, concatenation, 76, output, len);
}
UCHAR prefix[] =
{ 'I', 'n', 'i', 't', ' ', 'C', 'o', 'u', 'n', 't', 'e', 'r' };
- // Zero the related information
+ /* Zero the related information */
NdisZeroMemory(result, 80);
NdisZeroMemory(local, 80);
NdisZeroMemory(KeyCounter, 32);
for (i = 0; i < 32; i++) {
- // copy the local MAC address
+ /* copy the local MAC address */
COPY_MAC_ADDR(local, macAddr);
curr = MAC_ADDR_LEN;
- // concatenate the current time
+ /* concatenate the current time */
NdisGetSystemUpTime(&CurrentTime);
NdisMoveMemory(&local[curr], &CurrentTime, sizeof(CurrentTime));
curr += sizeof(CurrentTime);
- // concatenate the last result
+ /* concatenate the last result */
NdisMoveMemory(&local[curr], result, 32);
curr += 32;
- // concatenate a variable
+ /* concatenate a variable */
NdisMoveMemory(&local[curr], &i, 2);
curr += 2;
- // calculate the result
+ /* calculate the result */
PRF(KeyCounter, 32, prefix, 12, local, curr, result, 32);
}
*rsn_len = 0;
- // decide WPA2 or WPA1
+ /* decide WPA2 or WPA1 */
if (ElementID == Wpa2Ie) {
RSNIE2 *pRsnie_cipher = (RSNIE2 *) pRsnIe;
- // Assign the verson as 1
+ /* Assign the verson as 1 */
pRsnie_cipher->version = 1;
switch (WepStatus) {
- // TKIP mode
+ /* TKIP mode */
case Ndis802_11Encryption2Enabled:
NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
pRsnie_cipher->ucount = 1;
*rsn_len = sizeof(RSNIE2);
break;
- // AES mode
+ /* AES mode */
case Ndis802_11Encryption3Enabled:
if (bMixCipher)
NdisMoveMemory(pRsnie_cipher->mcast,
*rsn_len = sizeof(RSNIE2);
break;
- // TKIP-AES mix mode
+ /* TKIP-AES mix mode */
case Ndis802_11Encryption4Enabled:
NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
PairwiseCnt = 1;
- // Insert WPA2 TKIP as the first pairwise cipher
+ /* Insert WPA2 TKIP as the first pairwise cipher */
if (MIX_CIPHER_WPA2_TKIP_ON(FlexibleCipher)) {
NdisMoveMemory(pRsnie_cipher->ucast[0].oui,
OUI_WPA2_TKIP, 4);
- // Insert WPA2 AES as the secondary pairwise cipher
+ /* Insert WPA2 AES as the secondary pairwise cipher */
if (MIX_CIPHER_WPA2_AES_ON(FlexibleCipher)) {
NdisMoveMemory(pRsnie_cipher->ucast[0].
oui + 4, OUI_WPA2_CCMP,
PairwiseCnt = 2;
}
} else {
- // Insert WPA2 AES as the first pairwise cipher
+ /* Insert WPA2 AES as the first pairwise cipher */
NdisMoveMemory(pRsnie_cipher->ucast[0].oui,
OUI_WPA2_CCMP, 4);
}
break;
}
}
- // swap for big-endian platform
+ /* swap for big-endian platform */
pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
} else {
RSNIE *pRsnie_cipher = (RSNIE *) pRsnIe;
- // Assign OUI and version
+ /* Assign OUI and version */
NdisMoveMemory(pRsnie_cipher->oui, OUI_WPA_VERSION, 4);
pRsnie_cipher->version = 1;
switch (WepStatus) {
- // TKIP mode
+ /* TKIP mode */
case Ndis802_11Encryption2Enabled:
NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
pRsnie_cipher->ucount = 1;
*rsn_len = sizeof(RSNIE);
break;
- // AES mode
+ /* AES mode */
case Ndis802_11Encryption3Enabled:
if (bMixCipher)
NdisMoveMemory(pRsnie_cipher->mcast,
*rsn_len = sizeof(RSNIE);
break;
- // TKIP-AES mix mode
+ /* TKIP-AES mix mode */
case Ndis802_11Encryption4Enabled:
NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
PairwiseCnt = 1;
- // Insert WPA TKIP as the first pairwise cipher
+ /* Insert WPA TKIP as the first pairwise cipher */
if (MIX_CIPHER_WPA_TKIP_ON(FlexibleCipher)) {
NdisMoveMemory(pRsnie_cipher->ucast[0].oui,
OUI_WPA_TKIP, 4);
- // Insert WPA AES as the secondary pairwise cipher
+ /* Insert WPA AES as the secondary pairwise cipher */
if (MIX_CIPHER_WPA_AES_ON(FlexibleCipher)) {
NdisMoveMemory(pRsnie_cipher->ucast[0].
oui + 4, OUI_WPA_CCMP,
PairwiseCnt = 2;
}
} else {
- // Insert WPA AES as the first pairwise cipher
+ /* Insert WPA AES as the first pairwise cipher */
NdisMoveMemory(pRsnie_cipher->ucast[0].oui,
OUI_WPA_CCMP, 4);
}
break;
}
}
- // swap for big-endian platform
+ /* swap for big-endian platform */
pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
}
OUT PUCHAR pRsnIe, OUT UCHAR * rsn_len)
{
RSNIE_AUTH *pRsnie_auth;
- UCHAR AkmCnt = 1; // default as 1
+ UCHAR AkmCnt = 1; /* default as 1 */
pRsnie_auth = (RSNIE_AUTH *) (pRsnIe + (*rsn_len));
- // decide WPA2 or WPA1
+ /* decide WPA2 or WPA1 */
if (ElementID == Wpa2Ie) {
switch (AuthMode) {
pRsnie_auth->acount = AkmCnt;
pRsnie_auth->acount = cpu2le16(pRsnie_auth->acount);
- // update current RSNIE length
+ /* update current RSNIE length */
(*rsn_len) += (sizeof(RSNIE_AUTH) + (4 * (AkmCnt - 1)));
}
{
RSN_CAPABILITIES *pRSN_Cap;
- // it could be ignored in WPA1 mode
+ /* it could be ignored in WPA1 mode */
if (ElementID == WpaIe)
return;
pRSN_Cap->word = cpu2le16(pRSN_Cap->word);
- (*rsn_len) += sizeof(RSN_CAPABILITIES); // update current RSNIE length
+ (*rsn_len) += sizeof(RSN_CAPABILITIES); /* update current RSNIE length */
}
VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd,
IN UINT AuthMode, IN UINT WepStatus, IN UCHAR apidx)
{
- PUCHAR pRsnIe = NULL; // primary RSNIE
- UCHAR *rsnielen_cur_p = 0; // the length of the primary RSNIE
- UCHAR *rsnielen_ex_cur_p = 0; // the length of the secondary RSNIE
+ PUCHAR pRsnIe = NULL; /* primary RSNIE */
+ UCHAR *rsnielen_cur_p = 0; /* the length of the primary RSNIE */
+ UCHAR *rsnielen_ex_cur_p = 0; /* the length of the secondary RSNIE */
UCHAR PrimaryRsnie;
- BOOLEAN bMixCipher = FALSE; // indicate the pairwise and group cipher are different
+ BOOLEAN bMixCipher = FALSE; /* indicate the pairwise and group cipher are different */
UCHAR p_offset;
- WPA_MIX_PAIR_CIPHER FlexibleCipher = WPA_TKIPAES_WPA2_TKIPAES; // it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode
+ WPA_MIX_PAIR_CIPHER FlexibleCipher = WPA_TKIPAES_WPA2_TKIPAES; /* it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode */
rsnielen_cur_p = NULL;
rsnielen_ex_cur_p = NULL;
if (AuthMode < Ndis802_11AuthModeWPA)
return;
} else {
- // Support WPAPSK or WPA2PSK in STA-Infra mode
- // Support WPANone in STA-Adhoc mode
+ /* Support WPAPSK or WPA2PSK in STA-Infra mode */
+ /* Support WPANone in STA-Adhoc mode */
if ((AuthMode != Ndis802_11AuthModeWPAPSK) &&
(AuthMode != Ndis802_11AuthModeWPA2PSK) &&
(AuthMode != Ndis802_11AuthModeWPANone)
DBGPRINT(RT_DEBUG_TRACE, ("==> RTMPMakeRSNIE(STA)\n"));
- // Zero RSNIE context
+ /* Zero RSNIE context */
pAd->StaCfg.RSNIE_Len = 0;
NdisZeroMemory(pAd->StaCfg.RSN_IE, MAX_LEN_OF_RSNIE);
- // Pointer to RSNIE
+ /* Pointer to RSNIE */
rsnielen_cur_p = &pAd->StaCfg.RSNIE_Len;
pRsnIe = pAd->StaCfg.RSN_IE;
}
}
- // indicate primary RSNIE as WPA or WPA2
+ /* indicate primary RSNIE as WPA or WPA2 */
if ((AuthMode == Ndis802_11AuthModeWPA) ||
(AuthMode == Ndis802_11AuthModeWPAPSK) ||
(AuthMode == Ndis802_11AuthModeWPANone) ||
PrimaryRsnie = Wpa2Ie;
{
- // Build the primary RSNIE
- // 1. insert cipher suite
+ /* Build the primary RSNIE */
+ /* 1. insert cipher suite */
RTMPMakeRsnIeCipher(pAd, PrimaryRsnie, WepStatus, bMixCipher,
FlexibleCipher, pRsnIe, &p_offset);
- // 2. insert AKM
+ /* 2. insert AKM */
RTMPMakeRsnIeAKM(pAd, PrimaryRsnie, AuthMode, apidx, pRsnIe,
&p_offset);
- // 3. insert capability
+ /* 3. insert capability */
RTMPMakeRsnIeCap(pAd, PrimaryRsnie, apidx, pRsnIe, &p_offset);
}
- // 4. update the RSNIE length
+ /* 4. update the RSNIE length */
*rsnielen_cur_p = p_offset;
hex_dump("The primary RSNIE", pRsnIe, (*rsnielen_cur_p));
if (DataByteCount < (LENGTH_802_1_H + LENGTH_EAPOL_H))
return FALSE;
- // Skip LLC header
+ /* Skip LLC header */
if (NdisEqualMemory(SNAP_802_1H, pData, 6) ||
- // Cisco 1200 AP may send packet with SNAP_BRIDGE_TUNNEL
+ /* Cisco 1200 AP may send packet with SNAP_BRIDGE_TUNNEL */
NdisEqualMemory(SNAP_BRIDGE_TUNNEL, pData, 6)) {
pData += 6;
}
- // Skip 2-bytes EAPoL type
+ /* Skip 2-bytes EAPoL type */
if (NdisEqualMemory(EAPOL, pData, 2)) {
pData += 2;
} else
while (len > sizeof(RSNIE2)) {
pEid = (PEID_STRUCT) pVIE;
- // WPA RSN IE
+ /* WPA RSN IE */
if ((pEid->Eid == IE_WPA)
&& (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))) {
if ((pEntry->AuthMode == Ndis802_11AuthModeWPA
*Offset += (pEid->Len + 2);
}
- // WPA2 RSN IE
+ /* WPA2 RSN IE */
else if ((pEid->Eid == IE_RSN)
&& (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3))) {
if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2
UCHAR DefaultIdx = 0;
UCHAR skip_offset;
- // Verify The RSN IE contained in pairewise_msg_2 && pairewise_msg_3 and skip it
+ /* Verify The RSN IE contained in pairewise_msg_2 && pairewise_msg_3 and skip it */
if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_3) {
- // Check RSN IE whether it is WPA2/WPA2PSK
+ /* Check RSN IE whether it is WPA2/WPA2PSK */
if (!RTMPCheckRSNIE
(pAd, pKeyData, KeyDataLen, pEntry, &skip_offset)) {
- // send wireless event - for RSN IE different
+ /* send wireless event - for RSN IE different */
if (pAd->CommonCfg.bWirelessEvent)
RTMPSendWirelessEvent(pAd,
IW_RSNIE_DIFF_EVENT_FLAG,
if (bWPA2 && MsgType == EAPOL_PAIR_MSG_3) {
WpaShowAllsuite(pMyKeyData, skip_offset);
- // skip RSN IE
+ /* skip RSN IE */
pMyKeyData += skip_offset;
KeyDataLength -= skip_offset;
DBGPRINT(RT_DEBUG_TRACE,
DBGPRINT(RT_DEBUG_TRACE,
("RTMPParseEapolKeyData ==> KeyDataLength %d without RSN_IE \n",
KeyDataLength));
- //hex_dump("remain data", pMyKeyData, KeyDataLength);
+ /*hex_dump("remain data", pMyKeyData, KeyDataLength); */
- // Parse EKD format in pairwise_msg_3_WPA2 && group_msg_1_WPA2
+ /* Parse EKD format in pairwise_msg_3_WPA2 && group_msg_1_WPA2 */
if (bWPA2
&& (MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1)) {
- if (KeyDataLength >= 8) // KDE format exclude GTK length
+ if (KeyDataLength >= 8) /* KDE format exclude GTK length */
{
pKDE = (PKDE_ENCAP) pMyKeyData;
DefaultIdx = pKDE->GTKEncap.Kid;
- // Sanity check - KED length
+ /* Sanity check - KED length */
if (KeyDataLength < (pKDE->Len + 2)) {
DBGPRINT(RT_DEBUG_ERROR,
("ERROR: The len from KDE is too short \n"));
return FALSE;
}
- // Get GTK length - refer to IEEE 802.11i-2004 p.82
+ /* Get GTK length - refer to IEEE 802.11i-2004 p.82 */
GTKLEN = pKDE->Len - 6;
if (GTKLEN < LEN_AES_KEY) {
DBGPRINT(RT_DEBUG_ERROR,
DBGPRINT(RT_DEBUG_TRACE,
("GTK in KDE format ,DefaultKeyID=%d, KeyLen=%d \n",
DefaultIdx, GTKLEN));
- // skip it
+ /* skip it */
pMyKeyData += 8;
KeyDataLength -= 8;
DBGPRINT(RT_DEBUG_TRACE,
("GTK DefaultKeyID=%d \n", DefaultIdx));
}
- // Sanity check - shared key index must be 1 ~ 3
+ /* Sanity check - shared key index must be 1 ~ 3 */
if (DefaultIdx < 1 || DefaultIdx > 3) {
DBGPRINT(RT_DEBUG_ERROR,
("ERROR: GTK Key index(%d) is invalid in %s %s \n",
{
PCIPHER_KEY pSharedKey;
- // set key material, TxMic and RxMic
+ /* set key material, TxMic and RxMic */
NdisMoveMemory(pAd->StaCfg.GTK, pMyKeyData, 32);
pAd->StaCfg.DefaultKeyId = DefaultIdx;
pSharedKey = &pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId];
- // Prepare pair-wise key information into shared key table
+ /* Prepare pair-wise key information into shared key table */
NdisZeroMemory(pSharedKey, sizeof(CIPHER_KEY));
pSharedKey->KeyLen = LEN_TKIP_EK;
NdisMoveMemory(pSharedKey->Key, pAd->StaCfg.GTK, LEN_TKIP_EK);
NdisMoveMemory(pSharedKey->TxMic, &pAd->StaCfg.GTK[24],
LEN_TKIP_TXMICK);
- // Update Shared Key CipherAlg
+ /* Update Shared Key CipherAlg */
pSharedKey->CipherAlg = CIPHER_NONE;
if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
pSharedKey->CipherAlg = CIPHER_TKIP;
Ndis802_11GroupWEP104Enabled)
pSharedKey->CipherAlg = CIPHER_WEP128;
- // Update group key information to ASIC Shared Key Table
+ /* Update group key information to ASIC Shared Key Table */
AsicAddSharedKeyEntry(pAd,
BSS0,
pAd->StaCfg.DefaultKeyId,
pSharedKey->Key,
pSharedKey->TxMic, pSharedKey->RxMic);
- // Update ASIC WCID attribute table and IVEIV table
+ /* Update ASIC WCID attribute table and IVEIV table */
RTMPAddWcidAttributeEntry(pAd,
BSS0,
pAd->StaCfg.DefaultKeyId,
BOOLEAN bWPA2 = FALSE;
UCHAR KeyDescVer;
- // Choose WPA2 or not
+ /* Choose WPA2 or not */
if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2) ||
(pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
bWPA2 = TRUE;
- // Init Packet and Fill header
+ /* Init Packet and Fill header */
pMsg->ProVer = EAPOL_VER;
pMsg->ProType = EAPOLKey;
- // Default 95 bytes, the EAPoL-Key descriptor exclude Key-data field
+ /* Default 95 bytes, the EAPoL-Key descriptor exclude Key-data field */
SET_UINT16_TO_ARRARY(pMsg->Body_Len, LEN_EAPOL_KEY_MSG);
- // Fill in EAPoL descriptor
+ /* Fill in EAPoL descriptor */
if (bWPA2)
pMsg->KeyDesc.Type = WPA2_KEY_DESC;
else
pMsg->KeyDesc.Type = WPA1_KEY_DESC;
- // Key Descriptor Version (bits 0-2) specifies the key descriptor version type
+ /* Key Descriptor Version (bits 0-2) specifies the key descriptor version type */
{
- // Fill in Key information, refer to IEEE Std 802.11i-2004 page 78
- // When either the pairwise or the group cipher is AES, the DESC_TYPE_AES(2) shall be used.
+ /* Fill in Key information, refer to IEEE Std 802.11i-2004 page 78 */
+ /* When either the pairwise or the group cipher is AES, the DESC_TYPE_AES(2) shall be used. */
KeyDescVer =
(((pEntry->WepStatus == Ndis802_11Encryption3Enabled)
|| (GroupKeyWepStatus ==
pMsg->KeyDesc.KeyInfo.KeyDescVer = KeyDescVer;
- // Specify Key Type as Group(0) or Pairwise(1)
+ /* Specify Key Type as Group(0) or Pairwise(1) */
if (MsgType >= EAPOL_GROUP_MSG_1)
pMsg->KeyDesc.KeyInfo.KeyType = GROUPKEY;
else
pMsg->KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
- // Specify Key Index, only group_msg1_WPA1
+ /* Specify Key Index, only group_msg1_WPA1 */
if (!bWPA2 && (MsgType >= EAPOL_GROUP_MSG_1))
pMsg->KeyDesc.KeyInfo.KeyIndex = DefaultKeyIdx;
(MsgType == EAPOL_GROUP_MSG_1))) {
pMsg->KeyDesc.KeyInfo.EKD_DL = 1;
}
- // key Information element has done.
+ /* key Information element has done. */
*(USHORT *) (&pMsg->KeyDesc.KeyInfo) =
cpu2le16(*(USHORT *) (&pMsg->KeyDesc.KeyInfo));
- // Fill in Key Length
+ /* Fill in Key Length */
{
if (MsgType >= EAPOL_GROUP_MSG_1) {
- // the length of group key cipher
+ /* the length of group key cipher */
pMsg->KeyDesc.KeyLength[1] =
((GroupKeyWepStatus ==
Ndis802_11Encryption2Enabled) ? TKIP_GTK_LENGTH :
LEN_AES_KEY);
} else {
- // the length of pairwise key cipher
+ /* the length of pairwise key cipher */
pMsg->KeyDesc.KeyLength[1] =
((pEntry->WepStatus ==
Ndis802_11Encryption2Enabled) ? LEN_TKIP_KEY :
}
}
- // Fill in replay counter
+ /* Fill in replay counter */
NdisMoveMemory(pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter,
LEN_KEY_DESC_REPLAY);
- // Fill Key Nonce field
- // ANonce : pairwise_msg1 & pairwise_msg3
- // SNonce : pairwise_msg2
- // GNonce : group_msg1_wpa1
+ /* Fill Key Nonce field */
+ /* ANonce : pairwise_msg1 & pairwise_msg3 */
+ /* SNonce : pairwise_msg2 */
+ /* GNonce : group_msg1_wpa1 */
if ((MsgType <= EAPOL_PAIR_MSG_3)
|| ((!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))))
NdisMoveMemory(pMsg->KeyDesc.KeyNonce, KeyNonce,
LEN_KEY_DESC_NONCE);
- // Fill key IV - WPA2 as 0, WPA1 as random
+ /* Fill key IV - WPA2 as 0, WPA1 as random */
if (!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1)) {
- // Suggest IV be random number plus some number,
+ /* Suggest IV be random number plus some number, */
NdisMoveMemory(pMsg->KeyDesc.KeyIv, &KeyNonce[16],
LEN_KEY_DESC_IV);
pMsg->KeyDesc.KeyIv[15] += 2;
}
- // Fill Key RSC field
- // It contains the RSC for the GTK being installed.
+ /* Fill Key RSC field */
+ /* It contains the RSC for the GTK being installed. */
if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2)
|| (MsgType == EAPOL_GROUP_MSG_1)) {
NdisMoveMemory(pMsg->KeyDesc.KeyRsc, TxRSC, 6);
}
- // Clear Key MIC field for MIC calculation later
+ /* Clear Key MIC field for MIC calculation later */
NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
ConstructEapolKeyData(pEntry,
MsgType,
DefaultKeyIdx, GTK, RSNIE, RSNIE_Len, pMsg);
- // Calculate MIC and fill in KeyMic Field except Pairwise Msg 1.
+ /* Calculate MIC and fill in KeyMic Field except Pairwise Msg 1. */
if (MsgType != EAPOL_PAIR_MSG_1) {
CalculateMIC(KeyDescVer, pEntry->PTK, pMsg);
}
PRTMP_ADAPTER pAd = pEntry->pAd;
BOOLEAN GTK_Included = FALSE;
- // Choose WPA2 or not
+ /* Choose WPA2 or not */
if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2) ||
(pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
bWPA2Capable = TRUE;
MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)
return;
- // allocate memory pool
+ /* allocate memory pool */
os_alloc_mem(NULL, (PUCHAR *) & mpool, 1500);
if (mpool == NULL)
SET_UINT16_TO_ARRARY(pMsg->KeyDesc.KeyDataLen, 0);
data_offset = 0;
- // Encapsulate RSNIE in pairwise_msg2 & pairwise_msg3
+ /* Encapsulate RSNIE in pairwise_msg2 & pairwise_msg3 */
if (RSNIE_LEN
&& ((MsgType == EAPOL_PAIR_MSG_2)
|| (MsgType == EAPOL_PAIR_MSG_3))) {
RSNIE, RSNIE_LEN, pmkid_ptr, pmkid_len);
}
- // Encapsulate KDE format in pairwise_msg3_WPA2 & group_msg1_WPA2
+ /* Encapsulate KDE format in pairwise_msg3_WPA2 & group_msg1_WPA2 */
if (bWPA2Capable
&& ((MsgType == EAPOL_PAIR_MSG_3)
|| (MsgType == EAPOL_GROUP_MSG_1))) {
- // Key Data Encapsulation (KDE) format - 802.11i-2004 Figure-43w and Table-20h
+ /* Key Data Encapsulation (KDE) format - 802.11i-2004 Figure-43w and Table-20h */
Key_Data[data_offset + 0] = 0xDD;
if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled) {
- Key_Data[data_offset + 1] = 0x16; // 4+2+16(OUI+DataType+DataField)
+ Key_Data[data_offset + 1] = 0x16; /* 4+2+16(OUI+DataType+DataField) */
} else {
- Key_Data[data_offset + 1] = 0x26; // 4+2+32(OUI+DataType+DataField)
+ Key_Data[data_offset + 1] = 0x26; /* 4+2+32(OUI+DataType+DataField) */
}
Key_Data[data_offset + 2] = 0x00;
Key_Data[data_offset + 4] = 0xAC;
Key_Data[data_offset + 5] = 0x01;
- // GTK KDE format - 802.11i-2004 Figure-43x
+ /* GTK KDE format - 802.11i-2004 Figure-43x */
Key_Data[data_offset + 6] = (DefaultKeyIdx & 0x03);
- Key_Data[data_offset + 7] = 0x00; // Reserved Byte
+ Key_Data[data_offset + 7] = 0x00; /* Reserved Byte */
data_offset += 8;
}
- // Encapsulate GTK
- // Only for pairwise_msg3_WPA2 and group_msg1
+ /* Encapsulate GTK */
+ /* Only for pairwise_msg3_WPA2 and group_msg1 */
if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2Capable)
|| (MsgType == EAPOL_GROUP_MSG_1)) {
- // Fill in GTK
+ /* Fill in GTK */
if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled) {
NdisMoveMemory(&Key_Data[data_offset], GTK,
LEN_AES_KEY);
GTK_Included = TRUE;
}
- // This whole key-data field shall be encrypted if a GTK is included.
- // Encrypt the data material in key data field with KEK
+ /* This whole key-data field shall be encrypted if a GTK is included. */
+ /* Encrypt the data material in key data field with KEK */
if (GTK_Included) {
- //hex_dump("GTK_Included", Key_Data, data_offset);
+ /*hex_dump("GTK_Included", Key_Data, data_offset); */
if ((keyDescVer == DESC_TYPE_AES)) {
UCHAR remainder = 0;
UCHAR pad_len = 0;
- // Key Descriptor Version 2 or 3: AES key wrap, defined in IETF RFC 3394,
- // shall be used to encrypt the Key Data field using the KEK field from
- // the derived PTK.
+ /* Key Descriptor Version 2 or 3: AES key wrap, defined in IETF RFC 3394, */
+ /* shall be used to encrypt the Key Data field using the KEK field from */
+ /* the derived PTK. */
- // If the Key Data field uses the NIST AES key wrap, then the Key Data field
- // shall be padded before encrypting if the key data length is less than 16
- // octets or if it is not a multiple of 8. The padding consists of appending
- // a single octet 0xdd followed by zero or more 0x00 octets.
+ /* If the Key Data field uses the NIST AES key wrap, then the Key Data field */
+ /* shall be padded before encrypting if the key data length is less than 16 */
+ /* octets or if it is not a multiple of 8. The padding consists of appending */
+ /* a single octet 0xdd followed by zero or more 0x00 octets. */
if ((remainder = data_offset & 0x07) != 0) {
INT i;
AES_GTK_KEY_WRAP(&pEntry->PTK[16], Key_Data,
data_offset, Rc4GTK);
- // AES wrap function will grow 8 bytes in length
+ /* AES wrap function will grow 8 bytes in length */
data_offset += 8;
} else {
/* Key Descriptor Version 1: ARC4 is used to encrypt the Key Data field
using the KEK field from the derived PTK. */
- // PREPARE Encrypted "Key DATA" field. (Encrypt GTK with RC4, usinf PTK[16]->[31] as Key, IV-field as IV)
- // put TxTsc in Key RSC field
- pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32; //Init crc32.
+ /* PREPARE Encrypted "Key DATA" field. (Encrypt GTK with RC4, usinf PTK[16]->[31] as Key, IV-field as IV) */
+ /* put TxTsc in Key RSC field */
+ pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32; /*Init crc32. */
- // ekey is the contanetion of IV-field, and PTK[16]->PTK[31]
+ /* ekey is the contanetion of IV-field, and PTK[16]->PTK[31] */
NdisMoveMemory(ekey, pMsg->KeyDesc.KeyIv,
LEN_KEY_DESC_IV);
NdisMoveMemory(&ekey[LEN_KEY_DESC_IV], &pEntry->PTK[16],
LEN_EAP_EK);
- ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, ekey, sizeof(ekey)); //INIT SBOX, KEYLEN+3(IV)
+ ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, ekey, sizeof(ekey)); /*INIT SBOX, KEYLEN+3(IV) */
pAd->PrivateInfo.FCSCRC32 =
RTMP_CALC_FCS32(pAd->PrivateInfo.FCSCRC32, Key_Data,
data_offset);
NdisMoveMemory(pMsg->KeyDesc.KeyData, Key_Data, data_offset);
}
- // Update key data length field and total body length
+ /* Update key data length field and total body length */
SET_UINT16_TO_ARRARY(pMsg->KeyDesc.KeyDataLen, data_offset);
INC_UINT16_TO_ARRARY(pMsg->Body_Len, data_offset);
UCHAR mic[LEN_KEY_DESC_MIC];
UCHAR digest[80];
- // allocate memory for MIC calculation
+ /* allocate memory for MIC calculation */
os_alloc_mem(NULL, (PUCHAR *) & OutBuffer, 512);
if (OutBuffer == NULL) {
DBGPRINT(RT_DEBUG_ERROR, ("!!!CalculateMIC: no memory!!!\n"));
return;
}
- // make a frame for calculating MIC.
+ /* make a frame for calculating MIC. */
MakeOutgoingFrame(OutBuffer, &FrameLen,
CONV_ARRARY_TO_UINT16(pMsg->Body_Len) + 4, pMsg,
END_OF_ARGS);
NdisZeroMemory(mic, sizeof(mic));
- // Calculate MIC
+ /* Calculate MIC */
if (KeyDescVer == DESC_TYPE_AES) {
HMAC_SHA1(PTK, LEN_EAP_MICK, OutBuffer, FrameLen, digest,
SHA1_DIGEST_SIZE);
MD5_DIGEST_SIZE);
}
- // store the calculated MIC
+ /* store the calculated MIC */
NdisMoveMemory(pMsg->KeyDesc.KeyMic, mic, LEN_KEY_DESC_MIC);
os_free_mem(NULL, OutBuffer);
{
PRXWI_STRUC pRxWI = pRxBlk->pRxWI;
- // handle WEP decryption
+ /* handle WEP decryption */
if (GroupCipher == Ndis802_11Encryption1Enabled) {
if (RTMPSoftDecryptWEP
(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount,
pShard_key)) {
- //Minus IV[4] & ICV[4]
+ /*Minus IV[4] & ICV[4] */
pRxWI->MPDUtotalByteCount -= 8;
} else {
DBGPRINT(RT_DEBUG_ERROR,
("ERROR : Software decrypt WEP data fails.\n"));
- // give up this frame
+ /* give up this frame */
return NDIS_STATUS_FAILURE;
}
}
- // handle TKIP decryption
+ /* handle TKIP decryption */
else if (GroupCipher == Ndis802_11Encryption2Enabled) {
if (RTMPSoftDecryptTKIP
(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount, 0,
pShard_key)) {
- //Minus 8 bytes MIC, 8 bytes IV/EIV, 4 bytes ICV
+ /*Minus 8 bytes MIC, 8 bytes IV/EIV, 4 bytes ICV */
pRxWI->MPDUtotalByteCount -= 20;
} else {
DBGPRINT(RT_DEBUG_ERROR,
("ERROR : RTMPSoftDecryptTKIP Failed\n"));
- // give up this frame
+ /* give up this frame */
return NDIS_STATUS_FAILURE;
}
}
- // handle AES decryption
+ /* handle AES decryption */
else if (GroupCipher == Ndis802_11Encryption3Enabled) {
if (RTMPSoftDecryptAES
(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount,
pShard_key)) {
- //8 bytes MIC, 8 bytes IV/EIV (CCMP Header)
+ /*8 bytes MIC, 8 bytes IV/EIV (CCMP Header) */
pRxWI->MPDUtotalByteCount -= 16;
} else {
DBGPRINT(RT_DEBUG_ERROR,
("ERROR : RTMPSoftDecryptAES Failed\n"));
- // give up this frame
+ /* give up this frame */
return NDIS_STATUS_FAILURE;
}
} else {
- // give up this frame
+ /* give up this frame */
return NDIS_STATUS_FAILURE;
}
BOOLEAN isWPA2 = FALSE;
pEid = (PEID_STRUCT) rsnie;
- len = rsnie_len - 2; // exclude IE and length
+ len = rsnie_len - 2; /* exclude IE and length */
pBuf = (PUINT8) & pEid->Octet[0];
- // set default value
+ /* set default value */
*count = 0;
- // Check length
+ /* Check length */
if ((len <= 0) || (pEid->Len != len)) {
DBGPRINT_ERR(("%s : The length is invalid\n", __func__));
return NULL;
}
- // Check WPA or WPA2
+ /* Check WPA or WPA2 */
if (pEid->Eid == IE_WPA) {
PRSNIE pRsnie = (PRSNIE) pBuf;
UINT16 ucount;
__func__));
return NULL;
}
- // Get the count of pairwise cipher
+ /* Get the count of pairwise cipher */
ucount = cpu2le16(pRsnie->ucount);
if (ucount > 2) {
DBGPRINT_ERR(("%s : The count(%d) of pairwise cipher is invlaid\n", __func__, ucount));
return NULL;
}
- // Get the group cipher
+ /* Get the group cipher */
if (type == GROUP_SUITE) {
*count = 1;
return pRsnie->mcast;
}
- // Get the pairwise cipher suite
+ /* Get the pairwise cipher suite */
else if (type == PAIRWISE_SUITE) {
DBGPRINT(RT_DEBUG_TRACE,
("%s : The count of pairwise cipher is %d\n",
__func__));
return NULL;
}
- // Get the count of pairwise cipher
+ /* Get the count of pairwise cipher */
ucount = cpu2le16(pRsnie->ucount);
if (ucount > 2) {
DBGPRINT_ERR(("%s : The count(%d) of pairwise cipher is invlaid\n", __func__, ucount));
return NULL;
}
- // Get the group cipher
+ /* Get the group cipher */
if (type == GROUP_SUITE) {
*count = 1;
return pRsnie->mcast;
}
- // Get the pairwise cipher suite
+ /* Get the pairwise cipher suite */
else if (type == PAIRWISE_SUITE) {
DBGPRINT(RT_DEBUG_TRACE,
("%s : The count of pairwise cipher is %d\n",
return NULL;
}
- // skip group cipher and pairwise cipher suite
+ /* skip group cipher and pairwise cipher suite */
pBuf += offset;
len -= offset;
__func__));
return NULL;
}
- // pointer to AKM count
+ /* pointer to AKM count */
pAkm = (PRSNIE_AUTH) pBuf;
- // Get the count of pairwise cipher
+ /* Get the count of pairwise cipher */
acount = cpu2le16(pAkm->acount);
if (acount > 2) {
DBGPRINT_ERR(("%s : The count(%d) of AKM is invlaid\n",
__func__, acount));
return NULL;
}
- // Get the AKM suite
+ /* Get the AKM suite */
if (type == AKM_SUITE) {
DBGPRINT(RT_DEBUG_TRACE, ("%s : The count of AKM is %d\n",
__func__, acount));
pBuf += offset;
len -= offset;
- // The remaining length must larger than (RSN-Capability(2) + PMKID-Count(2) + PMKID(16~))
+ /* The remaining length must larger than (RSN-Capability(2) + PMKID-Count(2) + PMKID(16~)) */
if (len >= (sizeof(RSN_CAPABILITIES) + 2 + LEN_PMKID)) {
- // Skip RSN capability and PMKID-Count
+ /* Skip RSN capability and PMKID-Count */
pBuf += (sizeof(RSN_CAPABILITIES) + 2);
len -= (sizeof(RSN_CAPABILITIES) + 2);
- // Get PMKID
+ /* Get PMKID */
if (type == PMKID_LIST) {
*count = 1;
return pBuf;
}
*count = 0;
- //DBGPRINT_ERR(("%s : The type(%d) doesn't support \n", __func__, type));
+ /*DBGPRINT_ERR(("%s : The type(%d) doesn't support \n", __func__, type)); */
return NULL;
}
hex_dump("RSNIE", rsnie, rsnie_len);
- // group cipher
+ /* group cipher */
if ((pSuite =
GetSuiteFromRSNIE(rsnie, rsnie_len, GROUP_SUITE,
&count)) != NULL) {
hex_dump("group cipher", pSuite, 4 * count);
}
- // pairwise cipher
+ /* pairwise cipher */
if ((pSuite =
GetSuiteFromRSNIE(rsnie, rsnie_len, PAIRWISE_SUITE,
&count)) != NULL) {
hex_dump("pairwise cipher", pSuite, 4 * count);
}
- // AKM
+ /* AKM */
if ((pSuite =
GetSuiteFromRSNIE(rsnie, rsnie_len, AKM_SUITE, &count)) != NULL) {
hex_dump("AKM suite", pSuite, 4 * count);
}
- // PMKID
+ /* PMKID */
if ((pSuite =
GetSuiteFromRSNIE(rsnie, rsnie_len, PMKID_LIST, &count)) != NULL) {
hex_dump("PMKID", pSuite, LEN_PMKID);
RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
- //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
- //Use the eeprom logical address and covert to address to block number
+ /*Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. */
+ /*Use the eeprom logical address and covert to address to block number */
eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
- //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 0.
+ /*Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 0. */
eFuseCtrlStruc.field.EFSROM_MODE = 0;
- //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+ /*Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure. */
eFuseCtrlStruc.field.EFSROM_KICK = 1;
NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
- //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+ /*Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. */
i = 0;
while (i < 500) {
- //rtmp.HwMemoryReadDword(EFUSE_CTRL, (DWORD *) &eFuseCtrlStruc, 4);
+ /*rtmp.HwMemoryReadDword(EFUSE_CTRL, (DWORD *) &eFuseCtrlStruc, 4); */
RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
if (eFuseCtrlStruc.field.EFSROM_KICK == 0) {
break;
i++;
}
- //if EFSROM_AOUT is not found in physical address, write 0xffff
+ /*if EFSROM_AOUT is not found in physical address, write 0xffff */
if (eFuseCtrlStruc.field.EFSROM_AOUT == 0x3f) {
for (i = 0; i < Length / 2; i++)
*(pData + 2 * i) = 0xffff;
} else {
- //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x590-0x59C)
+ /*Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x590-0x59C) */
efuseDataOffset = EFUSE_DATA3 - (Offset & 0xC);
- //data hold 4 bytes data.
- //In RTMP_IO_READ32 will automatically execute 32-bytes swapping
+ /*data hold 4 bytes data. */
+ /*In RTMP_IO_READ32 will automatically execute 32-bytes swapping */
RTMP_IO_READ32(pAd, efuseDataOffset, &data);
- //Decide the upper 2 bytes or the bottom 2 bytes.
- // Little-endian S | S Big-endian
- // addr 3 2 1 0 | 0 1 2 3
- // Ori-V D C B A | A B C D
- //After swapping
- // D C B A | D C B A
- //Return 2-bytes
- //The return byte statrs from S. Therefore, the little-endian will return BA, the Big-endian will return DC.
- //For returning the bottom 2 bytes, the Big-endian should shift right 2-bytes.
+ /*Decide the upper 2 bytes or the bottom 2 bytes. */
+ /* Little-endian S | S Big-endian */
+ /* addr 3 2 1 0 | 0 1 2 3 */
+ /* Ori-V D C B A | A B C D */
+ /*After swapping */
+ /* D C B A | D C B A */
+ /*Return 2-bytes */
+ /*The return byte statrs from S. Therefore, the little-endian will return BA, the Big-endian will return DC. */
+ /*For returning the bottom 2 bytes, the Big-endian should shift right 2-bytes. */
data = data >> (8 * (Offset & 0x3));
NdisMoveMemory(pData, &data, Length);
RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
- //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+ /*Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. */
eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
- //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
- //Read in physical view
+ /*Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1. */
+ /*Read in physical view */
eFuseCtrlStruc.field.EFSROM_MODE = 1;
- //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+ /*Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure. */
eFuseCtrlStruc.field.EFSROM_KICK = 1;
NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
- //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+ /*Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. */
i = 0;
while (i < 500) {
RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
i++;
}
- //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
- //Because the size of each EFUSE_DATA is 4 Bytes, the size of address of each is 2 bits.
- //The previous 2 bits is the EFUSE_DATA number, the last 2 bits is used to decide which bytes
- //Decide which EFUSE_DATA to read
- //590:F E D C
- //594:B A 9 8
- //598:7 6 5 4
- //59C:3 2 1 0
+ /*Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590) */
+ /*Because the size of each EFUSE_DATA is 4 Bytes, the size of address of each is 2 bits. */
+ /*The previous 2 bits is the EFUSE_DATA number, the last 2 bits is used to decide which bytes */
+ /*Decide which EFUSE_DATA to read */
+ /*590:F E D C */
+ /*594:B A 9 8 */
+ /*598:7 6 5 4 */
+ /*59C:3 2 1 0 */
efuseDataOffset = EFUSE_DATA3 - (Offset & 0xC);
RTMP_IO_READ32(pAd, efuseDataOffset, &data);
USHORT *pInBuf = (USHORT *) lpInBuffer;
USHORT *pOutBuf = (USHORT *) lpOutBuffer;
- USHORT Offset = pInBuf[0]; //addr
- USHORT Length = pInBuf[1]; //length
+ USHORT Offset = pInBuf[0]; /*addr */
+ USHORT Length = pInBuf[1]; /*length */
int i;
for (i = 0; i < Length; i += 2) {
#include "../rt_config.h"
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
static inline VOID RaiseClock(IN PRTMP_ADAPTER pAd, IN UINT32 * x)
{
*x = *x | EESK;
RTMP_IO_WRITE32(pAd, E2PROM_CSR, *x);
- RTMPusecDelay(1); // Max frequency = 1MHz in Spec. definition
+ RTMPusecDelay(1); /* Max frequency = 1MHz in Spec. definition */
}
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
static inline VOID LowerClock(IN PRTMP_ADAPTER pAd, IN UINT32 * x)
{
*x = *x & ~EESK;
RTMPusecDelay(1);
}
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
static inline USHORT ShiftInBits(IN PRTMP_ADAPTER pAd)
{
UINT32 x, i;
RaiseClock(pAd, &x);
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
- LowerClock(pAd, &x); //prevent read failed
+ LowerClock(pAd, &x); /*prevent read failed */
x &= ~(EEDI);
if (x & EEDO)
return data;
}
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
static inline VOID ShiftOutBits(IN PRTMP_ADAPTER pAd,
IN USHORT data, IN USHORT count)
{
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
}
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
static inline VOID EEpromCleanup(IN PRTMP_ADAPTER pAd)
{
UINT32 x;
{
UINT32 x;
- // reset bits and set EECS
+ /* reset bits and set EECS */
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x &= ~(EEDI | EEDO | EESK);
x |= EECS;
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
- // kick a pulse
+ /* kick a pulse */
RaiseClock(pAd, &x);
LowerClock(pAd, &x);
- // output the read_opcode and six pulse in that order
+ /* output the read_opcode and six pulse in that order */
ShiftOutBits(pAd, EEPROM_EWEN_OPCODE, 5);
ShiftOutBits(pAd, 0, 6);
{
UINT32 x;
- // reset bits and set EECS
+ /* reset bits and set EECS */
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x &= ~(EEDI | EEDO | EESK);
x |= EECS;
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
- // kick a pulse
+ /* kick a pulse */
RaiseClock(pAd, &x);
LowerClock(pAd, &x);
- // output the read_opcode and six pulse in that order
+ /* output the read_opcode and six pulse in that order */
ShiftOutBits(pAd, EEPROM_EWDS_OPCODE, 5);
ShiftOutBits(pAd, 0, 6);
EEpromCleanup(pAd);
}
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
int rtmp_ee_prom_read16(IN PRTMP_ADAPTER pAd,
IN USHORT Offset, OUT USHORT * pValue)
{
USHORT data;
Offset /= 2;
- // reset bits and set EECS
+ /* reset bits and set EECS */
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x &= ~(EEDI | EEDO | EESK);
x |= EECS;
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
- // patch can not access e-Fuse issue
+ /* patch can not access e-Fuse issue */
if (!(IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))) {
- // kick a pulse
+ /* kick a pulse */
RaiseClock(pAd, &x);
LowerClock(pAd, &x);
}
- // output the read_opcode and register number in that order
+ /* output the read_opcode and register number in that order */
ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3);
ShiftOutBits(pAd, Offset, pAd->EEPROMAddressNum);
- // Now read the data (16 bits) in from the selected EEPROM word
+ /* Now read the data (16 bits) in from the selected EEPROM word */
data = ShiftInBits(pAd);
EEpromCleanup(pAd);
return 0;
} else
DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n"));
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
+#endif /* RTMP_EFUSE_SUPPORT // */
+#endif /* RT30xx // */
switch (infType) {
#ifdef RTMP_PCI_SUPPORT
pChipOps->eeinit = NULL;
pChipOps->eeread = rtmp_ee_prom_read16;
break;
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
#ifdef RTMP_USB_SUPPORT
case RTMP_DEV_INF_USB:
pChipOps->eeinit = NULL;
pChipOps->eeread = RTUSBReadEEPROM16;
break;
-#endif // RTMP_USB_SUPPORT //
+#endif /* RTMP_USB_SUPPORT // */
default:
DBGPRINT(RT_DEBUG_ERROR, ("RtmpChipOpsEepromHook() failed!\n"));
UCHAR PRE_N_HT_OUI[] = { 0x00, 0x90, 0x4c };
UCHAR RateSwitchTable[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x11, 0x00, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x11, 0x00, 0, 0, 0, /* Initial used item after association */
0x00, 0x00, 0, 40, 101,
0x01, 0x00, 1, 40, 50,
0x02, 0x00, 2, 35, 45,
};
UCHAR RateSwitchTable11B[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x04, 0x03, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x04, 0x03, 0, 0, 0, /* Initial used item after association */
0x00, 0x00, 0, 40, 101,
0x01, 0x00, 1, 40, 50,
0x02, 0x00, 2, 35, 45,
};
UCHAR RateSwitchTable11BG[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0a, 0x00, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0a, 0x00, 0, 0, 0, /* Initial used item after association */
0x00, 0x00, 0, 40, 101,
0x01, 0x00, 1, 40, 50,
0x02, 0x00, 2, 35, 45,
};
UCHAR RateSwitchTable11G[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x08, 0x00, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x08, 0x00, 0, 0, 0, /* Initial used item after association */
0x00, 0x10, 0, 20, 101,
0x01, 0x10, 1, 20, 35,
0x02, 0x10, 2, 20, 35,
};
UCHAR RateSwitchTable11N1S[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0c, 0x0a, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0c, 0x0a, 0, 0, 0, /* Initial used item after association */
0x00, 0x00, 0, 40, 101,
0x01, 0x00, 1, 40, 50,
0x02, 0x00, 2, 25, 45,
};
UCHAR RateSwitchTable11N2S[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0e, 0x0c, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0e, 0x0c, 0, 0, 0, /* Initial used item after association */
0x00, 0x00, 0, 40, 101,
0x01, 0x00, 1, 40, 50,
0x02, 0x00, 2, 25, 45,
};
UCHAR RateSwitchTable11N3S[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0b, 0x00, 0, 0, 0, // 0x0a, 0x00, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0b, 0x00, 0, 0, 0, /* 0x0a, 0x00, 0, 0, 0, // Initial used item after association */
0x00, 0x21, 0, 30, 101,
0x01, 0x21, 1, 20, 50,
0x02, 0x21, 2, 20, 50,
0x03, 0x21, 3, 15, 50,
0x04, 0x21, 4, 15, 30,
- 0x05, 0x20, 11, 15, 30, // Required by System-Alan @ 20080812
- 0x06, 0x20, 12, 15, 30, // 0x05, 0x20, 12, 15, 30,
- 0x07, 0x20, 13, 8, 20, // 0x06, 0x20, 13, 8, 20,
- 0x08, 0x20, 14, 8, 20, // 0x07, 0x20, 14, 8, 20,
- 0x09, 0x20, 15, 8, 25, // 0x08, 0x20, 15, 8, 25,
- 0x0a, 0x22, 15, 8, 25, // 0x09, 0x22, 15, 8, 25,
+ 0x05, 0x20, 11, 15, 30, /* Required by System-Alan @ 20080812 */
+ 0x06, 0x20, 12, 15, 30, /* 0x05, 0x20, 12, 15, 30, */
+ 0x07, 0x20, 13, 8, 20, /* 0x06, 0x20, 13, 8, 20, */
+ 0x08, 0x20, 14, 8, 20, /* 0x07, 0x20, 14, 8, 20, */
+ 0x09, 0x20, 15, 8, 25, /* 0x08, 0x20, 15, 8, 25, */
+ 0x0a, 0x22, 15, 8, 25, /* 0x09, 0x22, 15, 8, 25, */
};
UCHAR RateSwitchTable11N2SForABand[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0b, 0x09, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0b, 0x09, 0, 0, 0, /* Initial used item after association */
0x00, 0x21, 0, 30, 101,
0x01, 0x21, 1, 20, 50,
0x02, 0x21, 2, 20, 50,
0x0a, 0x22, 15, 8, 25,
};
-UCHAR RateSwitchTable11N3SForABand[] = { // 3*3
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0b, 0x09, 0, 0, 0, // Initial used item after association
+UCHAR RateSwitchTable11N3SForABand[] = { /* 3*3 */
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0b, 0x09, 0, 0, 0, /* Initial used item after association */
0x00, 0x21, 0, 30, 101,
0x01, 0x21, 1, 20, 50,
0x02, 0x21, 2, 20, 50,
};
UCHAR RateSwitchTable11BGN1S[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0c, 0x0a, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0c, 0x0a, 0, 0, 0, /* Initial used item after association */
0x00, 0x00, 0, 40, 101,
0x01, 0x00, 1, 40, 50,
0x02, 0x00, 2, 25, 45,
};
UCHAR RateSwitchTable11BGN2S[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0e, 0x0c, 0, 0, 0, // Initial used item after association
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0e, 0x0c, 0, 0, 0, /* Initial used item after association */
0x00, 0x00, 0, 40, 101,
0x01, 0x00, 1, 40, 50,
0x02, 0x00, 2, 25, 45,
0x0d, 0x22, 15, 8, 15,
};
-UCHAR RateSwitchTable11BGN3S[] = { // 3*3
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0a, 0x00, 0, 0, 0, // Initial used item after association
- 0x00, 0x21, 0, 30, 101, //50
+UCHAR RateSwitchTable11BGN3S[] = { /* 3*3 */
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0a, 0x00, 0, 0, 0, /* Initial used item after association */
+ 0x00, 0x21, 0, 30, 101, /*50 */
0x01, 0x21, 1, 20, 50,
0x02, 0x21, 2, 20, 50,
0x03, 0x21, 3, 20, 50,
};
UCHAR RateSwitchTable11BGN2SForABand[] = {
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0b, 0x09, 0, 0, 0, // Initial used item after association
- 0x00, 0x21, 0, 30, 101, //50
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0b, 0x09, 0, 0, 0, /* Initial used item after association */
+ 0x00, 0x21, 0, 30, 101, /*50 */
0x01, 0x21, 1, 20, 50,
0x02, 0x21, 2, 20, 50,
0x03, 0x21, 3, 15, 50,
0x0a, 0x22, 15, 8, 25,
};
-UCHAR RateSwitchTable11BGN3SForABand[] = { // 3*3
-// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
- 0x0c, 0x09, 0, 0, 0, // Initial used item after association
- 0x00, 0x21, 0, 30, 101, //50
+UCHAR RateSwitchTable11BGN3SForABand[] = { /* 3*3 */
+/* Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+ 0x0c, 0x09, 0, 0, 0, /* Initial used item after association */
+ 0x00, 0x21, 0, 30, 101, /*50 */
0x01, 0x21, 1, 20, 50,
0x02, 0x21, 2, 20, 50,
0x03, 0x21, 3, 15, 50,
};
extern UCHAR OfdmRateToRxwiMCS[];
-// since RT61 has better RX sensibility, we have to limit TX ACK rate not to exceed our normal data TX rate.
-// otherwise the WLAN peer may not be able to receive the ACK thus downgrade its data TX rate
+/* since RT61 has better RX sensibility, we have to limit TX ACK rate not to exceed our normal data TX rate. */
+/* otherwise the WLAN peer may not be able to receive the ACK thus downgrade its data TX rate */
ULONG BasicRateMask[12] =
{ 0xfffff001 /* 1-Mbps */ , 0xfffff003 /* 2 Mbps */ , 0xfffff007 /* 5.5 */ ,
0xfffff00f /* 11 */ ,
UCHAR BROADCAST_ADDR[MAC_ADDR_LEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-// e.g. RssiSafeLevelForTxRate[RATE_36]" means if the current RSSI is greater than
-// this value, then it's quaranteed capable of operating in 36 mbps TX rate in
-// clean environment.
-// TxRate: 1 2 5.5 11 6 9 12 18 24 36 48 54 72 100
+/* e.g. RssiSafeLevelForTxRate[RATE_36]" means if the current RSSI is greater than */
+/* this value, then it's quaranteed capable of operating in 36 mbps TX rate in */
+/* clean environment. */
+/* TxRate: 1 2 5.5 11 6 9 12 18 24 36 48 54 72 100 */
CHAR RssiSafeLevelForTxRate[] =
{ -92, -91, -90, -87, -88, -86, -85, -83, -81, -78, -72, -71, -40, -40 };
{
BssTableInit(&pAd->ScanTab);
- // init STA state machines
+ /* init STA state machines */
AssocStateMachineInit(pAd, &pAd->Mlme.AssocMachine,
pAd->Mlme.AssocFunc);
AuthStateMachineInit(pAd, &pAd->Mlme.AuthMachine,
SyncStateMachineInit(pAd, &pAd->Mlme.SyncMachine,
pAd->Mlme.SyncFunc);
- // Since we are using switch/case to implement it, the init is different from the above
- // state machine init
+ /* Since we are using switch/case to implement it, the init is different from the above */
+ /* state machine init */
MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
}
ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine,
pAd->Mlme.ActFunc);
- // Init mlme periodic timer
+ /* Init mlme periodic timer */
RTMPInitTimer(pAd, &pAd->Mlme.PeriodicTimer,
GET_TIMER_FUNCTION(MlmePeriodicExec), pAd, TRUE);
- // Set mlme periodic timer
+ /* Set mlme periodic timer */
RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
- // software-based RX Antenna diversity
+ /* software-based RX Antenna diversity */
RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer,
GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd,
FALSE);
{
#ifdef RTMP_PCI_SUPPORT
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)) {
- // only PCIe cards need these two timers
+ /* only PCIe cards need these two timers */
RTMPInitTimer(pAd, &pAd->Mlme.PsPollTimer,
GET_TIMER_FUNCTION
(PsPollWakeExec), pAd, FALSE);
GET_TIMER_FUNCTION(RadioOnExec),
pAd, FALSE);
}
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
RTMPInitTimer(pAd, &pAd->Mlme.LinkDownTimer,
GET_TIMER_FUNCTION(LinkDownExec), pAd,
(RtmpUsbStaAsicForceWakeupTimeout), pAd,
FALSE);
pAd->Mlme.AutoWakeupTimerRunning = FALSE;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
}
} while (FALSE);
{
MLME_QUEUE_ELEM *Elem = NULL;
- // Only accept MLME and Frame from peer side, no other (control/data) frame should
- // get into this state machine
+ /* Only accept MLME and Frame from peer side, no other (control/data) frame should */
+ /* get into this state machine */
NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
if (pAd->Mlme.bRunning) {
pAd->Mlme.Queue.Num));
break;
}
- //From message type, determine which state machine I should drive
+ /*From message type, determine which state machine I should drive */
if (MlmeDequeue(&pAd->Mlme.Queue, &Elem)) {
#ifdef RTMP_MAC_USB
if (Elem->MsgType == MT2_RESET_CONF) {
Elem->MsgLen = 0;
continue;
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- // if dequeue success
+ /* if dequeue success */
switch (Elem->Machine) {
- // STA state machines
+ /* STA state machines */
case ASSOC_STATE_MACHINE:
StateMachinePerformAction(pAd,
&pAd->Mlme.
("ERROR: Illegal machine %ld in MlmeHandler()\n",
Elem->Machine));
break;
- } // end of switch
+ } /* end of switch */
- // free MLME element
+ /* free MLME element */
Elem->Occupied = FALSE;
Elem->MsgLen = 0;
DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n"));
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) {
- // disable BEACON generation and other BEACON related hardware timers
+ /* disable BEACON generation and other BEACON related hardware timers */
AsicDisableSync(pAd);
}
{
- // Cancel pending timers
+ /* Cancel pending timers */
RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled);
RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
RTMPCancelTimer(&pAd->Mlme.LinkDownTimer, &Cancelled);
#ifdef RTMP_MAC_USB
RTMPCancelTimer(&pAd->Mlme.AutoWakeupTimer, &Cancelled);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
}
RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled);
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) {
RTMP_CHIP_OP *pChipOps = &pAd->chipOps;
- // Set LED
+ /* Set LED */
RTMPSetLED(pAd, LED_HALT);
- RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, firmware is not done it.
+ RTMPSetSignalLED(pAd, -100); /* Force signal strength Led to be turned off, firmware is not done it. */
#ifdef RTMP_MAC_USB
{
LED_CFG_STRUC LedCfg;
LedCfg.field.YLedMode = 0;
RTMP_IO_WRITE32(pAd, LED_CFG, LedCfg.word);
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
if (pChipOps->AsicHaltAction)
pChipOps->AsicHaltAction(pAd);
}
- RTMPusecDelay(5000); // 5 msec to gurantee Ant Diversity timer canceled
+ RTMPusecDelay(5000); /* 5 msec to gurantee Ant Diversity timer canceled */
MlmeQueueDestroy(&pAd->Mlme.Queue);
NdisFreeSpinLock(&pAd->Mlme.TaskLock);
{
pAd->RalinkCounters.LastOneSecRxOkDataCnt =
pAd->RalinkCounters.OneSecRxOkDataCnt;
- // clear all OneSecxxx counters.
+ /* clear all OneSecxxx counters. */
pAd->RalinkCounters.OneSecBeaconSentCnt = 0;
pAd->RalinkCounters.OneSecFalseCCACnt = 0;
pAd->RalinkCounters.OneSecRxFcsErrCnt = 0;
pAd->RalinkCounters.OneSecReceivedByteCount = 0;
pAd->RalinkCounters.OneSecTransmittedByteCount = 0;
- // TODO: for debug only. to be removed
+ /* TODO: for debug only. to be removed */
pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BE] = 0;
pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BK] = 0;
pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VI] = 0;
==========================================================================
*/
-#define ADHOC_BEACON_LOST_TIME (8*OS_HZ) // 8 sec
+#define ADHOC_BEACON_LOST_TIME (8*OS_HZ) /* 8 sec */
VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
IN PVOID FunctionContext,
IN PVOID SystemSpecific2, IN PVOID SystemSpecific3)
#ifdef RTMP_MAC_PCI
{
- // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second.
- // Move code to here, because following code will return when radio is off
+ /* If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second. */
+ /* Move code to here, because following code will return when radio is off */
if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) ==
0) && (pAd->StaCfg.bHardwareRadio == TRUE)
&& (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
) {
UINT32 data = 0;
- // Read GPIO pin2 as Hardware controlled radio state
+ /* Read GPIO pin2 as Hardware controlled radio state */
#ifndef RT3090
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data);
-#endif // RT3090 //
-//KH(PCIE PS):Added based on Jane<--
+#endif /* RT3090 // */
+/*KH(PCIE PS):Added based on Jane<-- */
#ifdef RT3090
-// Read GPIO pin2 as Hardware controlled radio state
-// We need to Read GPIO if HW said so no mater what advance power saving
+/* Read GPIO pin2 as Hardware controlled radio state */
+/* We need to Read GPIO if HW said so no mater what advance power saving */
if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd))
&&
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))
&& (pAd->StaCfg.PSControl.field.EnablePSinIdle ==
TRUE)) {
- // Want to make sure device goes to L0 state before reading register.
+ /* Want to make sure device goes to L0 state before reading register. */
RTMPPCIeLinkCtrlValueRestore(pAd, 0);
RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data);
RTMPPCIeLinkCtrlSetting(pAd, 3);
} else
RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data);
-#endif // RT3090 //
-//KH(PCIE PS):Added based on Jane-->
+#endif /* RT3090 // */
+/*KH(PCIE PS):Added based on Jane--> */
if (data & 0x04) {
pAd->StaCfg.bHwRadio = TRUE;
&& pAd->StaCfg.bSwRadio);
if (pAd->StaCfg.bRadio == TRUE) {
MlmeRadioOn(pAd);
- // Update extra information
+ /* Update extra information */
pAd->ExtraInfo = EXTRA_INFO_CLEAR;
} else {
MlmeRadioOff(pAd);
- // Update extra information
+ /* Update extra information */
pAd->ExtraInfo = HW_RADIO_OFF;
}
}
}
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_HALT_IN_PROGRESS |
fRTMP_ADAPTER_RADIO_OFF |
fRTMP_ADAPTER_RADIO_MEASUREMENT |
RTMP_MLME_PRE_SANITY_CHECK(pAd);
{
- // Do nothing if monitor mode is on
+ /* Do nothing if monitor mode is on */
if (MONITOR_ON(pAd))
return;
if (pAd->Mlme.PeriodicRound & 0x1) {
- // This is the fix for wifi 11n extension channel overlapping test case. for 2860D
+ /* This is the fix for wifi 11n extension channel overlapping test case. for 2860D */
if (((pAd->MACVersion & 0xffff) == 0x0101) &&
(STA_TGN_WIFI_ON(pAd)) &&
(pAd->CommonCfg.IOTestParm.bToggle == FALSE))
pAd->bUpdateBcnCntDone = FALSE;
-// RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3);
+/* RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3); */
pAd->Mlme.PeriodicRound++;
#ifdef RTMP_MAC_USB
- // execute every 100ms, update the Tx FIFO Cnt for update Tx Rate.
+ /* execute every 100ms, update the Tx FIFO Cnt for update Tx Rate. */
NICUpdateFifoStaCounters(pAd);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- // execute every 500ms
+ /* execute every 500ms */
if ((pAd->Mlme.PeriodicRound % 5 == 0)
&& RTMPAutoRateSwitchCheck(pAd)
/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */ )
{
- // perform dynamic tx rate switching based on past TX history
+ /* perform dynamic tx rate switching based on past TX history */
{
if ((OPSTATUS_TEST_FLAG
(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
MlmeDynamicTxRateSwitching(pAd);
}
}
- // Normal 1 second Mlme PeriodicExec.
+ /* Normal 1 second Mlme PeriodicExec. */
if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE == 0) {
pAd->Mlme.OneSecPeriodicRound++;
- //ORIBATimerTimeout(pAd);
+ /*ORIBATimerTimeout(pAd); */
- // Media status changed, report to NDIS
+ /* Media status changed, report to NDIS */
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE)) {
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
if (OPSTATUS_TEST_FLAG
NdisGetSystemUpTime(&pAd->Mlme.Now32);
- // add the most up-to-date h/w raw counters into software variable, so that
- // the dynamic tuning mechanism below are based on most up-to-date information
+ /* add the most up-to-date h/w raw counters into software variable, so that */
+ /* the dynamic tuning mechanism below are based on most up-to-date information */
NICUpdateRawCounters(pAd);
#ifdef RTMP_MAC_USB
RTUSBWatchDog(pAd);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- // Need statistics after read counter. So put after NICUpdateRawCounters
+ /* Need statistics after read counter. So put after NICUpdateRawCounters */
ORIBATimerTimeout(pAd);
- // if MGMT RING is full more than twice within 1 second, we consider there's
- // a hardware problem stucking the TX path. In this case, try a hardware reset
- // to recover the system
- // if (pAd->RalinkCounters.MgmtRingFullCount >= 2)
- // RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HARDWARE_ERROR);
- // else
- // pAd->RalinkCounters.MgmtRingFullCount = 0;
+ /* if MGMT RING is full more than twice within 1 second, we consider there's */
+ /* a hardware problem stucking the TX path. In this case, try a hardware reset */
+ /* to recover the system */
+ /* if (pAd->RalinkCounters.MgmtRingFullCount >= 2) */
+ /* RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HARDWARE_ERROR); */
+ /* else */
+ /* pAd->RalinkCounters.MgmtRingFullCount = 0; */
- // The time period for checking antenna is according to traffic
+ /* The time period for checking antenna is according to traffic */
{
if (pAd->Mlme.bEnableAutoAntennaCheck) {
TxTotalCnt =
pAd->RalinkCounters.OneSecTxRetryOkCount +
pAd->RalinkCounters.OneSecTxFailCount;
- // dynamic adjust antenna evaluation period according to the traffic
+ /* dynamic adjust antenna evaluation period according to the traffic */
if (TxTotalCnt > 50) {
if (pAd->Mlme.OneSecPeriodicRound %
10 == 0) {
#ifdef RTMP_MAC_PCI
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)
&& (pAd->bPCIclkOff == FALSE))
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
{
- // When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock
- // and sending CTS-to-self over and over.
- // Software Patch Solution:
- // 1. Polling debug state register 0x10F4 every one second.
- // 2. If in 0x10F4 the ((bit29==1) && (bit7==1)) OR ((bit29==1) && (bit5==1)), it means the deadlock has occurred.
- // 3. If the deadlock occurred, reset MAC/BBP by setting 0x1004 to 0x0001 for a while then setting it back to 0x000C again.
+ /* When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock */
+ /* and sending CTS-to-self over and over. */
+ /* Software Patch Solution: */
+ /* 1. Polling debug state register 0x10F4 every one second. */
+ /* 2. If in 0x10F4 the ((bit29==1) && (bit7==1)) OR ((bit29==1) && (bit5==1)), it means the deadlock has occurred. */
+ /* 3. If the deadlock occurred, reset MAC/BBP by setting 0x1004 to 0x0001 for a while then setting it back to 0x000C again. */
UINT32 MacReg = 0;
if (SsidLen > MAX_LEN_OF_SSID)
return (FALSE);
- // Check each character value
+ /* Check each character value */
for (index = 0; index < SsidLen; index++) {
if (pSsid[index] < 0x20)
return (FALSE);
}
- // All checked
+ /* All checked */
return (TRUE);
}
IN PUCHAR pTableSize, IN PUCHAR pInitTxRateIdx)
{
do {
- // decide the rate table for tuning
+ /* decide the rate table for tuning */
if (pAd->CommonCfg.TxRateTableSize > 0) {
*ppTable = RateSwitchTable;
*pTableSize = RateSwitchTable[0];
}
if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd)) {
- if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) { // 11N 1S Adhoc
+ if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) { /* 11N 1S Adhoc */
*ppTable = RateSwitchTable11N1S;
*pTableSize = RateSwitchTable11N1S[0];
*pInitTxRateIdx = RateSwitchTable11N1S[1];
- } else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) { // 11N 2S Adhoc
+ } else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) { /* 11N 2S Adhoc */
if (pAd->LatchRfRegs.Channel <= 14) {
*ppTable = RateSwitchTable11N2S;
*pTableSize = RateSwitchTable11N2S[0];
}
break;
}
- //if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
- // ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
- if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) { // 11BGN 1S AP
+ /*if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && */
+ /* ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) */
+ if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) { /* 11BGN 1S AP */
*ppTable = RateSwitchTable11BGN1S;
*pTableSize = RateSwitchTable11BGN1S[0];
*pInitTxRateIdx = RateSwitchTable11BGN1S[1];
break;
}
- //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
- // (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
- if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) { // 11BGN 2S AP
+ /*else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && */
+ /* (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) */
+ if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) { /* 11BGN 2S AP */
if (pAd->LatchRfRegs.Channel <= 14) {
*ppTable = RateSwitchTable11BGN2S;
*pTableSize = RateSwitchTable11BGN2S[0];
}
break;
}
- //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
- if ((pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) { // 11N 1S AP
+ /*else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) */
+ if ((pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) { /* 11N 1S AP */
*ppTable = RateSwitchTable11N1S;
*pTableSize = RateSwitchTable11N1S[0];
*pInitTxRateIdx = RateSwitchTable11N1S[1];
break;
}
- //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
- if ((pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) { // 11N 2S AP
+ /*else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) */
+ if ((pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) { /* 11N 2S AP */
if (pAd->LatchRfRegs.Channel <= 14) {
*ppTable = RateSwitchTable11N2S;
*pTableSize = RateSwitchTable11N2S[0];
break;
}
- //else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
+ /*else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) */
if ((pEntry->RateLen == 4 || pAd->CommonCfg.PhyMode == PHY_11B)
- //Iverson mark for Adhoc b mode,sta will use rate 54 Mbps when connect with sta b/g/n mode
+ /*Iverson mark for Adhoc b mode,sta will use rate 54 Mbps when connect with sta b/g/n mode */
/* && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) */
- ) { // B only AP
+ ) { /* B only AP */
*ppTable = RateSwitchTable11B;
*pTableSize = RateSwitchTable11B[0];
*pInitTxRateIdx = RateSwitchTable11B[1];
break;
}
- //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
+ /*else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) */
if ((pEntry->RateLen > 8)
&& (pEntry->HTCapability.MCSSet[0] == 0)
&& (pEntry->HTCapability.MCSSet[1] == 0)
- ) { // B/G mixed AP
+ ) { /* B/G mixed AP */
*ppTable = RateSwitchTable11BG;
*pTableSize = RateSwitchTable11BG[0];
*pInitTxRateIdx = RateSwitchTable11BG[1];
break;
}
- //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
+ /*else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) */
if ((pEntry->RateLen == 8)
&& (pEntry->HTCapability.MCSSet[0] == 0)
&& (pEntry->HTCapability.MCSSet[1] == 0)
- ) { // G only AP
+ ) { /* G only AP */
*ppTable = RateSwitchTable11G;
*pTableSize = RateSwitchTable11G[0];
*pInitTxRateIdx = RateSwitchTable11G[1];
}
{
- //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
- if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)) { // Legacy mode
+ /*else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) */
+ if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)) { /* Legacy mode */
if (pAd->CommonCfg.MaxTxRate <= RATE_11) {
*ppTable = RateSwitchTable11B;
*pTableSize = RateSwitchTable11B[0];
that ATE need are not collected via this routine.
*/
#if defined(RT305x)||defined(RT3070)
- // request by Gary, if Rssi0 > -42, BBP 82 need to be changed from 0x62 to 0x42, , bbp 67 need to be changed from 0x20 to 0x18
+ /* request by Gary, if Rssi0 > -42, BBP 82 need to be changed from 0x62 to 0x42, , bbp 67 need to be changed from 0x20 to 0x18 */
if (!pAd->CommonCfg.HighPowerPatchDisabled) {
#ifdef RT3070
if ((IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201)))
-#endif // RT3070 //
+#endif /* RT3070 // */
{
if ((pAd->StaCfg.RssiSample.AvgRssi0 != 0)
&& (pAd->StaCfg.RssiSample.AvgRssi0 >
}
#endif
#ifdef PCIE_PS_SUPPORT
-// don't perform idle-power-save mechanism within 3 min after driver initialization.
-// This can make rebooter test more robust
+/* don't perform idle-power-save mechanism within 3 min after driver initialization. */
+/* This can make rebooter test more robust */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)) {
if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd))
&& (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE)
AsicSendCommandToMcu(pAd, 0x30,
PowerSafeCID, 0xff,
0x2);
- // Wait command success
+ /* Wait command success */
AsicCheckCommanOk(pAd, PowerSafeCID);
RTMP_SET_FLAG(pAd,
fRTMP_ADAPTER_IDLE_RADIO_OFF);
AsicSendCommandToMcu(pAd, 0x30,
PowerSafeCID, 0xff,
0x02);
- // Wait command success
+ /* Wait command success */
AsicCheckCommanOk(pAd, PowerSafeCID);
RTMP_SET_FLAG(pAd,
fRTMP_ADAPTER_IDLE_RADIO_OFF);
pAd->MlmeAux.Ssid[2], pAd->MlmeAux.Ssid[3]));
}
}
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE) {
- // WPA MIC error should block association attempt for 60 seconds
+ /* WPA MIC error should block association attempt for 60 seconds */
if (pAd->StaCfg.bBlockAssoc &&
RTMP_TIME_AFTER(pAd->Mlme.Now32,
pAd->StaCfg.LastMicErrorTime +
pAd->RalinkCounters.OneSecTxFailCount;
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) {
- // update channel quality for Roaming and UI LinkQuality display
+ /* update channel quality for Roaming and UI LinkQuality display */
MlmeCalculateChannelQuality(pAd, NULL, pAd->Mlme.Now32);
}
- // must be AFTER MlmeDynamicTxRateSwitching() because it needs to know if
- // Radio is currently in noisy environment
+ /* must be AFTER MlmeDynamicTxRateSwitching() because it needs to know if */
+ /* Radio is currently in noisy environment */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
AsicAdjustTxPower(pAd);
if (INFRA_ON(pAd)) {
- // Is PSM bit consistent with user power management policy?
- // This is the only place that will set PSM bit ON.
+ /* Is PSM bit consistent with user power management policy? */
+ /* This is the only place that will set PSM bit ON. */
if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
MlmeCheckPsmChange(pAd, pAd->Mlme.Now32);
("MMCHK - No BEACON. restore R66 to the low bound(%d) \n",
(0x2E + GET_LNA_GAIN(pAd))));
}
- //if ((pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
- // (pAd->RalinkCounters.OneSecTxRetryOkCount == 0))
+ /*if ((pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) && */
+ /* (pAd->RalinkCounters.OneSecTxRetryOkCount == 0)) */
{
if (pAd->CommonCfg.bAPSDCapable
&& pAd->CommonCfg.APEdcaParm.bAPSDCapable) {
- // When APSD is enabled, the period changes as 20 sec
+ /* When APSD is enabled, the period changes as 20 sec */
if ((pAd->Mlme.OneSecPeriodicRound % 20) == 8)
RTMPSendNullFrame(pAd,
pAd->CommonCfg.TxRate,
TRUE);
} else {
- // Send out a NULL frame every 10 sec to inform AP that STA is still alive (Avoid being age out)
+ /* Send out a NULL frame every 10 sec to inform AP that STA is still alive (Avoid being age out) */
if ((pAd->Mlme.OneSecPeriodicRound % 10) == 8) {
if (pAd->CommonCfg.bWmmCapable)
RTMPSendNullFrame(pAd,
("MMCHK - No BEACON. Dead CQI. Auto Recovery attempt #%ld\n",
pAd->RalinkCounters.BadCQIAutoRecoveryCount));
- // Lost AP, send disconnect & link down event
+ /* Lost AP, send disconnect & link down event */
LinkDown(pAd, FALSE);
RtmpOSWrielessEventSend(pAd, SIOCGIWAP, -1, NULL, NULL,
0);
- // RTMPPatchMacBbpBug(pAd);
+ /* RTMPPatchMacBbpBug(pAd); */
MlmeAutoReconnectLastSSID(pAd);
} else if (CQI_IS_BAD(pAd->Mlme.ChannelQuality)) {
pAd->RalinkCounters.BadCQIAutoRecoveryCount++;
pAd->StaCfg.RssiSample.
LastRssi2);
- // Scanning, ignore Roaming
+ /* Scanning, ignore Roaming */
if (!RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)
&& (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE)
("Rssi=%d, dBmToRoam=%d\n", MaxRssi,
(CHAR) dBmToRoam));
- // Add auto seamless roaming
+ /* Add auto seamless roaming */
if (rv == FALSE)
rv = MlmeCheckForFastRoaming(pAd);
}
}
} else if (ADHOC_ON(pAd)) {
- // If all peers leave, and this STA becomes the last one in this IBSS, then change MediaState
- // to DISCONNECTED. But still holding this IBSS (i.e. sending BEACON) so that other STAs can
- // join later.
+ /* If all peers leave, and this STA becomes the last one in this IBSS, then change MediaState */
+ /* to DISCONNECTED. But still holding this IBSS (i.e. sending BEACON) so that other STAs can */
+ /* join later. */
if (RTMP_TIME_AFTER
(pAd->Mlme.Now32,
pAd->StaCfg.LastBeaconRxTime + ADHOC_BEACON_LOST_TIME)
MacTableDeleteEntry(pAd, pEntry->Aid,
pEntry->Addr);
}
- } else // no INFRA nor ADHOC connection
+ } else /* no INFRA nor ADHOC connection */
{
if (pAd->StaCfg.bScanReqIsFromWebUI &&
&ScanReq);
pAd->Mlme.CntlMachine.CurrState =
CNTL_WAIT_OID_LIST_SCAN;
- // Reset Missed scan number
+ /* Reset Missed scan number */
pAd->StaCfg.LastScanTime =
pAd->Mlme.Now32;
- } else if (pAd->StaCfg.BssType == BSS_ADHOC) // Quit the forever scan when in a very clean room
+ } else if (pAd->StaCfg.BssType == BSS_ADHOC) /* Quit the forever scan when in a very clean room */
MlmeAutoReconnectLastSSID(pAd);
} else if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) {
if ((pAd->Mlme.OneSecPeriodicRound % 7) == 0) {
return;
}
-// Link down report
+/* Link down report */
VOID LinkDownExec(IN PVOID SystemSpecific1,
IN PVOID FunctionContext,
IN PVOID SystemSpecific2, IN PVOID SystemSpecific3)
}
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID MlmeAutoScan(IN PRTMP_ADAPTER pAd)
{
- // check CntlMachine.CurrState to avoid collision with NDIS SetOID request
+ /* check CntlMachine.CurrState to avoid collision with NDIS SetOID request */
if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) {
DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Driver auto scan\n"));
MlmeEnqueue(pAd,
}
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID MlmeAutoReconnectLastSSID(IN PRTMP_ADAPTER pAd)
{
if (pAd->StaCfg.bAutoConnectByBssid) {
RTMP_MLME_HANDLER(pAd);
}
- // check CntlMachine.CurrState to avoid collision with NDIS SetOID request
+ /* check CntlMachine.CurrState to avoid collision with NDIS SetOID request */
else if ((pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) &&
(MlmeValidateSSID
(pAd->MlmeAux.AutoReconnectSsid,
BSS_ENTRY *pBss;
DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForRoaming\n"));
- // put all roaming candidates into RoamTab, and sort in RSSI order
+ /* put all roaming candidates into RoamTab, and sort in RSSI order */
BssTableInit(pRoamTab);
for (i = 0; i < pAd->ScanTab.BssNr; i++) {
pBss = &pAd->ScanTab.BssEntry[i];
if ((pBss->LastBeaconRxTime + pAd->StaCfg.BeaconLostTime) <
Now32)
- continue; // AP disappear
+ continue; /* AP disappear */
if (pBss->Rssi <= RSSI_THRESHOLD_FOR_ROAMING)
- continue; // RSSI too weak. forget it.
+ continue; /* RSSI too weak. forget it. */
if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
- continue; // skip current AP
+ continue; /* skip current AP */
if (pBss->Rssi <
(pAd->StaCfg.RssiSample.LastRssi0 + RSSI_DELTA))
- continue; // only AP with stronger RSSI is eligible for roaming
+ continue; /* only AP with stronger RSSI is eligible for roaming */
- // AP passing all above rules is put into roaming candidate table
+ /* AP passing all above rules is put into roaming candidate table */
NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss,
sizeof(BSS_ENTRY));
pRoamTab->BssNr += 1;
}
if (pRoamTab->BssNr > 0) {
- // check CntlMachine.CurrState to avoid collision with NDIS SetOID request
+ /* check CntlMachine.CurrState to avoid collision with NDIS SetOID request */
if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) {
pAd->RalinkCounters.PoorCQIRoamingCount++;
DBGPRINT(RT_DEBUG_TRACE,
BSS_ENTRY *pBss;
DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForFastRoaming\n"));
- // put all roaming candidates into RoamTab, and sort in RSSI order
+ /* put all roaming candidates into RoamTab, and sort in RSSI order */
BssTableInit(pRoamTab);
for (i = 0; i < pAd->ScanTab.BssNr; i++) {
pBss = &pAd->ScanTab.BssEntry[i];
if ((pBss->Rssi <= -50)
&& (pBss->Channel == pAd->CommonCfg.Channel))
- continue; // RSSI too weak. forget it.
+ continue; /* RSSI too weak. forget it. */
if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
- continue; // skip current AP
+ continue; /* skip current AP */
if (!SSID_EQUAL
(pBss->Ssid, pBss->SsidLen, pAd->CommonCfg.Ssid,
pAd->CommonCfg.SsidLen))
- continue; // skip different SSID
+ continue; /* skip different SSID */
if (pBss->Rssi <
(RTMPMaxRssi
(pAd, pAd->StaCfg.RssiSample.LastRssi0,
pAd->StaCfg.RssiSample.LastRssi1,
pAd->StaCfg.RssiSample.LastRssi2) + RSSI_DELTA))
- continue; // skip AP without better RSSI
+ continue; /* skip AP without better RSSI */
DBGPRINT(RT_DEBUG_TRACE,
("LastRssi0 = %d, pBss->Rssi = %d\n",
pAd->StaCfg.RssiSample.LastRssi1,
pAd->StaCfg.RssiSample.LastRssi2),
pBss->Rssi));
- // AP passing all above rules is put into roaming candidate table
+ /* AP passing all above rules is put into roaming candidate table */
NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss,
sizeof(BSS_ENTRY));
pRoamTab->BssNr += 1;
DBGPRINT(RT_DEBUG_TRACE,
("<== MlmeCheckForFastRoaming (BssNr=%d)\n", pRoamTab->BssNr));
if (pRoamTab->BssNr > 0) {
- // check CntlMachine.CurrState to avoid collision with NDIS SetOID request
+ /* check CntlMachine.CurrState to avoid collision with NDIS SetOID request */
if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) {
pAd->RalinkCounters.PoorCQIRoamingCount++;
DBGPRINT(RT_DEBUG_TRACE,
pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;
if (ADHOC_ON(pAd)) {
- // If peer adhoc is b-only mode, we can't send 11g rate.
+ /* If peer adhoc is b-only mode, we can't send 11g rate. */
pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
pEntry->HTPhyMode.field.STBC = STBC_NONE;
- //
- // For Adhoc MODE_CCK, driver will use AdhocBOnlyJoined flag to roll back to B only if necessary
- //
+ /* */
+ /* For Adhoc MODE_CCK, driver will use AdhocBOnlyJoined flag to roll back to B only if necessary */
+ /* */
pEntry->HTPhyMode.field.MODE = pTxRate->Mode;
pEntry->HTPhyMode.field.ShortGI =
pAd->StaCfg.HTPhyMode.field.ShortGI;
pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
- // Patch speed error in status page
+ /* Patch speed error in status page */
pAd->StaCfg.HTPhyMode.field.MODE = pEntry->HTPhyMode.field.MODE;
} else {
if (pTxRate->Mode <= MaxMode)
else
pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
- // Reexam each bandwidth's SGI support.
+ /* Reexam each bandwidth's SGI support. */
if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400) {
if ((pEntry->HTPhyMode.field.BW == BW_20)
&&
(pEntry, fCLIENT_STATUS_SGI40_CAPABLE)))
pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
}
- // Turn RTS/CTS rate to 6Mbps.
+ /* Turn RTS/CTS rate to 6Mbps. */
if ((pEntry->HTPhyMode.field.MCS == 0)
&& (pAd->StaCfg.HTPhyMode.field.MCS != 0)) {
pEntry->HTPhyMode.field.MCS =
MAC_TABLE_ENTRY *pEntry;
RSSI_SAMPLE *pRssi = &pAd->StaCfg.RssiSample;
- //
- // walk through MAC table, see if need to change AP's TX rate toward each entry
- //
+ /* */
+ /* walk through MAC table, see if need to change AP's TX rate toward each entry */
+ /* */
for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) {
pEntry = &pAd->MacTab.Content[i];
- // check if this entry need to switch rate automatically
+ /* check if this entry need to switch rate automatically */
if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
continue;
pRssi->AvgRssi0,
pRssi->AvgRssi1, pRssi->AvgRssi2);
- // Update statistic counter
+ /* Update statistic counter */
RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
pAd->bUpdateBcnCntDone = TRUE;
pAd->WlanCounters.FailedCount.u.LowPart +=
TxStaCnt0.field.TxFailCount;
- // if no traffic in the past 1-sec period, don't change TX rate,
- // but clear all bad history. because the bad history may affect the next
- // Chariot throughput test
+ /* if no traffic in the past 1-sec period, don't change TX rate, */
+ /* but clear all bad history. because the bad history may affect the next */
+ /* Chariot throughput test */
AccuTxTotalCnt =
pAd->RalinkCounters.OneSecTxNoRetryOkCount +
pAd->RalinkCounters.OneSecTxRetryOkCount +
if (CurrRateIdx >= TableSize) {
CurrRateIdx = TableSize - 1;
}
- // When switch from Fixed rate -> auto rate, the REAL TX rate might be different from pAd->CommonCfg.TxRateIndex.
- // So need to sync here.
+ /* When switch from Fixed rate -> auto rate, the REAL TX rate might be different from pAd->CommonCfg.TxRateIndex. */
+ /* So need to sync here. */
pCurrTxRate =
(PRTMP_TX_RATE_SWITCH) & pTable[(CurrRateIdx + 1) * 5];
if ((pEntry->HTPhyMode.field.MCS != pCurrTxRate->CurrMCS)
- //&& (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
+ /*&& (pAd->StaCfg.bAutoTxRateSwitch == TRUE) */
) {
- // Need to sync Real Tx rate and our record.
- // Then return for next DRS.
+ /* Need to sync Real Tx rate and our record. */
+ /* Then return for next DRS. */
pCurrTxRate =
(PRTMP_TX_RATE_SWITCH) & pTable[(InitTxRateIdx + 1)
* 5];
pEntry->CurrTxRateIndex = InitTxRateIdx;
MlmeSetTxRate(pAd, pEntry, pCurrTxRate);
- // reset all OneSecTx counters
+ /* reset all OneSecTx counters */
RESET_ONE_SEC_TX_CNT(pEntry);
continue;
}
- // decide the next upgrade rate and downgrade rate, if any
+ /* decide the next upgrade rate and downgrade rate, if any */
if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1))) {
UpRateIdx = CurrRateIdx + 1;
DownRateIdx = CurrRateIdx - 1;
TrainDown = pCurrTxRate->TrainDown;
}
- //pAd->DrsCounters.LastTimeTxRateChangeAction = pAd->DrsCounters.LastSecTxRateChangeAction;
+ /*pAd->DrsCounters.LastTimeTxRateChangeAction = pAd->DrsCounters.LastSecTxRateChangeAction; */
- //
- // Keep the last time TxRateChangeAction status.
- //
+ /* */
+ /* Keep the last time TxRateChangeAction status. */
+ /* */
pEntry->LastTimeTxRateChangeAction =
pEntry->LastSecTxRateChangeAction;
- //
- // CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
- // (criteria copied from RT2500 for Netopia case)
- //
+ /* */
+ /* CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI */
+ /* (criteria copied from RT2500 for Netopia case) */
+ /* */
if (TxTotalCnt <= 15) {
CHAR idx = 0;
UCHAR TxRateIdx;
UCHAR MCS0 = 0, MCS1 = 0, MCS2 = 0, MCS3 = 0, MCS4 =
0, MCS5 = 0, MCS6 = 0, MCS7 = 0;
UCHAR MCS12 = 0, MCS13 = 0, MCS14 = 0, MCS15 = 0;
- UCHAR MCS20 = 0, MCS21 = 0, MCS22 = 0, MCS23 = 0; // 3*3
+ UCHAR MCS20 = 0, MCS21 = 0, MCS22 = 0, MCS23 = 0; /* 3*3 */
- // check the existence and index of each needed MCS
+ /* check the existence and index of each needed MCS */
while (idx < pTable[0]) {
pCurrTxRate =
(PRTMP_TX_RATE_SWITCH) & pTable[(idx + 1) *
} else if (pCurrTxRate->CurrMCS == MCS_6) {
MCS6 = idx;
}
- //else if (pCurrTxRate->CurrMCS == MCS_7)
- else if ((pCurrTxRate->CurrMCS == MCS_7) && (pCurrTxRate->ShortGI == GI_800)) // prevent the highest MCS using short GI when 1T and low throughput
+ /*else if (pCurrTxRate->CurrMCS == MCS_7) */
+ else if ((pCurrTxRate->CurrMCS == MCS_7) && (pCurrTxRate->ShortGI == GI_800)) /* prevent the highest MCS using short GI when 1T and low throughput */
{
MCS7 = idx;
} else if (pCurrTxRate->CurrMCS == MCS_12) {
} else if (pCurrTxRate->CurrMCS == MCS_14) {
MCS14 = idx;
}
- //else if ((pCurrTxRate->CurrMCS == MCS_15)/* && (pCurrTxRate->ShortGI == GI_800)*/) //we hope to use ShortGI as initial rate
- else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800)) //we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI
+ else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800)) /*we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI */
{
MCS15 = idx;
- } else if (pCurrTxRate->CurrMCS == MCS_20) // 3*3
+ } else if (pCurrTxRate->CurrMCS == MCS_20) /* 3*3 */
{
MCS20 = idx;
} else if (pCurrTxRate->CurrMCS == MCS_21) {
}
/*if (MCS15) */
- if ((pTable == RateSwitchTable11BGN3S) || (pTable == RateSwitchTable11N3S) || (pTable == RateSwitchTable)) { // N mode with 3 stream // 3*3
+ if ((pTable == RateSwitchTable11BGN3S) || (pTable == RateSwitchTable11N3S) || (pTable == RateSwitchTable)) { /* N mode with 3 stream // 3*3 */
if (MCS23 && (Rssi >= -70))
TxRateIdx = MCS23;
else if (MCS22 && (Rssi >= -72))
else
TxRateIdx = MCS0;
}
-// else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand) || (pTable == RateSwitchTable))
- else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) || (pTable == RateSwitchTable11N2S) || (pTable == RateSwitchTable11N2SForABand)) // 3*3
- { // N mode with 2 stream
+/* else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand) || (pTable == RateSwitchTable)) */
+ else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) || (pTable == RateSwitchTable11N2S) || (pTable == RateSwitchTable11N2SForABand)) /* 3*3 */
+ { /* N mode with 2 stream */
if (MCS15 && (Rssi >= (-70 + RssiOffset)))
TxRateIdx = MCS15;
else if (MCS14 && (Rssi >= (-72 + RssiOffset)))
TxRateIdx = MCS1;
else
TxRateIdx = MCS0;
- } else if ((pTable == RateSwitchTable11BGN1S) || (pTable == RateSwitchTable11N1S)) { // N mode with 1 stream
+ } else if ((pTable == RateSwitchTable11BGN1S) || (pTable == RateSwitchTable11N1S)) { /* N mode with 1 stream */
if (MCS7 && (Rssi > (-72 + RssiOffset)))
TxRateIdx = MCS7;
else if (MCS6 && (Rssi > (-74 + RssiOffset)))
TxRateIdx = MCS1;
else
TxRateIdx = MCS0;
- } else { // Legacy mode
+ } else { /* Legacy mode */
if (MCS7 && (Rssi > -70))
TxRateIdx = MCS7;
else if (MCS6 && (Rssi > -74))
TxRateIdx = MCS5;
else if (MCS4 && (Rssi > -82))
TxRateIdx = MCS4;
- else if (MCS4 == 0) // for B-only mode
+ else if (MCS4 == 0) /* for B-only mode */
TxRateIdx = MCS3;
else if (MCS3 && (Rssi > -85))
TxRateIdx = MCS3;
TxRateIdx = MCS0;
}
- // if (TxRateIdx != pAd->CommonCfg.TxRateIndex)
+ /* if (TxRateIdx != pAd->CommonCfg.TxRateIndex) */
{
pEntry->CurrTxRateIndex = TxRateIdx;
pNextTxRate =
sizeof(UCHAR) *
MAX_STEP_OF_TX_RATE_SWITCH);
pEntry->fLastSecAccordingRSSI = TRUE;
- // reset all OneSecTx counters
+ /* reset all OneSecTx counters */
RESET_ONE_SEC_TX_CNT(pEntry);
continue;
if (pEntry->fLastSecAccordingRSSI == TRUE) {
pEntry->fLastSecAccordingRSSI = FALSE;
pEntry->LastSecTxRateChangeAction = 0;
- // reset all OneSecTx counters
+ /* reset all OneSecTx counters */
RESET_ONE_SEC_TX_CNT(pEntry);
continue;
pEntry->CurrTxRateStableTime++;
- // downgrade TX quality if PER >= Rate-Down threshold
+ /* downgrade TX quality if PER >= Rate-Down threshold */
if (TxErrorRatio >= TrainDown) {
bTrainUpDown = TRUE;
pEntry->TxQuality[CurrRateIdx] =
DRS_TX_QUALITY_WORST_BOUND;
}
- // upgrade TX quality if PER <= Rate-Up threshold
+ /* upgrade TX quality if PER <= Rate-Up threshold */
else if (TxErrorRatio <= TrainUp) {
bTrainUpDown = TRUE;
bUpgradeQuality = TRUE;
if (pEntry->TxQuality[CurrRateIdx])
- pEntry->TxQuality[CurrRateIdx]--; // quality very good in CurrRate
+ pEntry->TxQuality[CurrRateIdx]--; /* quality very good in CurrRate */
if (pEntry->TxRateUpPenalty)
pEntry->TxRateUpPenalty--;
else if (pEntry->TxQuality[UpRateIdx])
- pEntry->TxQuality[UpRateIdx]--; // may improve next UP rate's quality
+ pEntry->TxQuality[UpRateIdx]--; /* may improve next UP rate's quality */
}
pEntry->PER[CurrRateIdx] = (UCHAR) TxErrorRatio;
if (bTrainUpDown) {
- // perform DRS - consider TxRate Down first, then rate up.
+ /* perform DRS - consider TxRate Down first, then rate up. */
if ((CurrRateIdx != DownRateIdx)
&& (pEntry->TxQuality[CurrRateIdx] >=
DRS_TX_QUALITY_WORST_BOUND)) {
}
} while (FALSE);
- // if rate-up happen, clear all bad history of all TX rates
+ /* if rate-up happen, clear all bad history of all TX rates */
if (pEntry->CurrTxRateIndex > CurrRateIdx) {
pEntry->CurrTxRateStableTime = 0;
pEntry->TxRateUpPenalty = 0;
- pEntry->LastSecTxRateChangeAction = 1; // rate UP
+ pEntry->LastSecTxRateChangeAction = 1; /* rate UP */
NdisZeroMemory(pEntry->TxQuality,
sizeof(USHORT) *
MAX_STEP_OF_TX_RATE_SWITCH);
sizeof(UCHAR) *
MAX_STEP_OF_TX_RATE_SWITCH);
- //
- // For TxRate fast train up
- //
+ /* */
+ /* For TxRate fast train up */
+ /* */
if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning) {
RTMPSetTimer(&pAd->StaCfg.
StaQuickResponeForRateUpTimer,
}
bTxRateChanged = TRUE;
}
- // if rate-down happen, only clear DownRate's bad history
+ /* if rate-down happen, only clear DownRate's bad history */
else if (pEntry->CurrTxRateIndex < CurrRateIdx) {
pEntry->CurrTxRateStableTime = 0;
- pEntry->TxRateUpPenalty = 0; // no penalty
- pEntry->LastSecTxRateChangeAction = 2; // rate DOWN
+ pEntry->TxRateUpPenalty = 0; /* no penalty */
+ pEntry->LastSecTxRateChangeAction = 2; /* rate DOWN */
pEntry->TxQuality[pEntry->CurrTxRateIndex] = 0;
pEntry->PER[pEntry->CurrTxRateIndex] = 0;
- //
- // For TxRate fast train down
- //
+ /* */
+ /* For TxRate fast train down */
+ /* */
if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning) {
RTMPSetTimer(&pAd->StaCfg.
StaQuickResponeForRateUpTimer,
}
bTxRateChanged = TRUE;
} else {
- pEntry->LastSecTxRateChangeAction = 0; // rate no change
+ pEntry->LastSecTxRateChangeAction = 0; /* rate no change */
bTxRateChanged = FALSE;
}
{
UCHAR tmpTxRate;
- // to fix tcp ack issue
+ /* to fix tcp ack issue */
if (!bTxRateChanged
&& (pAd->RalinkCounters.OneSecReceivedByteCount >
(pAd->RalinkCounters.
if (bTxRateChanged && pNextTxRate) {
MlmeSetTxRate(pAd, pEntry, pNextTxRate);
}
- // reset all OneSecTx counters
+ /* reset all OneSecTx counters */
RESET_ONE_SEC_TX_CNT(pEntry);
}
}
UCHAR UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx = 0;
ULONG TxTotalCnt;
ULONG TxErrorRatio = 0;
- BOOLEAN bTxRateChanged; //, bUpgradeQuality = FALSE;
+ BOOLEAN bTxRateChanged; /*, bUpgradeQuality = FALSE; */
PRTMP_TX_RATE_SWITCH pCurrTxRate, pNextTxRate = NULL;
PUCHAR pTable;
UCHAR TableSize = 0;
pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
- //
- // walk through MAC table, see if need to change AP's TX rate toward each entry
- //
+ /* */
+ /* walk through MAC table, see if need to change AP's TX rate toward each entry */
+ /* */
for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) {
pEntry = &pAd->MacTab.Content[i];
- // check if this entry need to switch rate automatically
+ /* check if this entry need to switch rate automatically */
if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
continue;
MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize,
&InitTxRateIdx);
- // decide the next upgrade rate and downgrade rate, if any
+ /* decide the next upgrade rate and downgrade rate, if any */
if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1))) {
UpRateIdx = CurrRateIdx + 1;
DownRateIdx = CurrRateIdx - 1;
}
if (pAd->MacTab.Size == 1) {
- // Update statistic counter
+ /* Update statistic counter */
RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
TxTotalCnt;
}
- //
- // CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
- // (criteria copied from RT2500 for Netopia case)
- //
+ /* */
+ /* CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI */
+ /* (criteria copied from RT2500 for Netopia case) */
+ /* */
if (TxTotalCnt <= 12) {
NdisZeroMemory(pAd->DrsCounters.TxQuality,
sizeof(USHORT) *
else
ratio = 4;
- // downgrade TX quality if PER >= Rate-Down threshold
+ /* downgrade TX quality if PER >= Rate-Down threshold */
if (TxErrorRatio >= TrainDown) {
pAd->DrsCounters.TxQuality[CurrRateIdx] =
DRS_TX_QUALITY_WORST_BOUND;
OneSecTxNoRetryOKRationCount = (TxSuccess * ratio);
- // perform DRS - consider TxRate Down first, then rate up.
+ /* perform DRS - consider TxRate Down first, then rate up. */
if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1)
&& (CurrRateIdx != DownRateIdx)) {
if ((pAd->DrsCounters.LastTxOkCount + 2) >=
}
} while (FALSE);
- // if rate-up happen, clear all bad history of all TX rates
+ /* if rate-up happen, clear all bad history of all TX rates */
if (pAd->CommonCfg.TxRateIndex > CurrRateIdx) {
pAd->DrsCounters.TxRateUpPenalty = 0;
NdisZeroMemory(pAd->DrsCounters.TxQuality,
MAX_STEP_OF_TX_RATE_SWITCH);
bTxRateChanged = TRUE;
}
- // if rate-down happen, only clear DownRate's bad history
+ /* if rate-down happen, only clear DownRate's bad history */
else if (pAd->CommonCfg.TxRateIndex < CurrRateIdx) {
DBGPRINT_RAW(RT_DEBUG_TRACE,
("QuickDRS: --TX rate from %d to %d \n",
CurrRateIdx, pAd->CommonCfg.TxRateIndex));
- pAd->DrsCounters.TxRateUpPenalty = 0; // no penalty
+ pAd->DrsCounters.TxRateUpPenalty = 0; /* no penalty */
pAd->DrsCounters.TxQuality[pAd->CommonCfg.TxRateIndex] =
0;
pAd->DrsCounters.PER[pAd->CommonCfg.TxRateIndex] = 0;
{
ULONG PowerMode;
- // condition -
- // 1. Psm maybe ON only happen in INFRASTRUCTURE mode
- // 2. user wants either MAX_PSP or FAST_PSP
- // 3. but current psm is not in PWR_SAVE
- // 4. CNTL state machine is not doing SCANning
- // 5. no TX SUCCESS event for the past 1-sec period
+ /* condition - */
+ /* 1. Psm maybe ON only happen in INFRASTRUCTURE mode */
+ /* 2. user wants either MAX_PSP or FAST_PSP */
+ /* 3. but current psm is not in PWR_SAVE */
+ /* 4. CNTL state machine is not doing SCANning */
+ /* 5. no TX SUCCESS event for the past 1-sec period */
PowerMode = pAd->StaCfg.WindowsPowerMode;
if (INFRA_ON(pAd) &&
(PowerMode != Ndis802_11PowerModeCAM) &&
(pAd->StaCfg.Psm == PWR_ACTIVE) &&
-// (! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
+/* (! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) */
(pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) &&
RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP)
/*&&
}
}
-// IRQL = PASSIVE_LEVEL
-// IRQL = DISPATCH_LEVEL
+/* IRQL = PASSIVE_LEVEL */
+/* IRQL = DISPATCH_LEVEL */
VOID MlmeSetPsmBit(IN PRTMP_ADAPTER pAd, IN USHORT psm)
{
AUTO_RSP_CFG_STRUC csr4;
UINT32 OneSecTxFailCount = 0;
UINT32 OneSecRxOkCnt = 0;
UINT32 OneSecRxFcsErrCnt = 0;
- ULONG ChannelQuality = 0; // 0..100, Channel Quality Indication for Roaming
+ ULONG ChannelQuality = 0; /* 0..100, Channel Quality Indication for Roaming */
ULONG BeaconLostTime = pAd->StaCfg.BeaconLostTime;
if (pAd->OpMode == OPMODE_STA) {
MaxRssi = RTMPMaxRssi(pAd, pRssiSample->LastRssi0,
pRssiSample->LastRssi1, pRssiSample->LastRssi2);
- //
- // calculate TX packet error ratio and TX retry ratio - if too few TX samples, skip TX related statistics
- //
+ /* */
+ /* calculate TX packet error ratio and TX retry ratio - if too few TX samples, skip TX related statistics */
+ /* */
TxOkCnt = OneSecTxNoRetryOkCount + OneSecTxRetryOkCount;
TxCnt = TxOkCnt + OneSecTxFailCount;
if (TxCnt < 5) {
TxPRR = ((TxCnt - OneSecTxNoRetryOkCount) * 100) / TxCnt;
}
- //
- // calculate RX PER - don't take RxPER into consideration if too few sample
- //
+ /* */
+ /* calculate RX PER - don't take RxPER into consideration if too few sample */
+ /* */
RxCnt = OneSecRxOkCnt + OneSecRxFcsErrCnt;
if (RxCnt < 5)
RxPER = 0;
else
RxPER = (OneSecRxFcsErrCnt * 100) / RxCnt;
- //
- // decide ChannelQuality based on: 1)last BEACON received time, 2)last RSSI, 3)TxPER, and 4)RxPER
- //
- if ((pAd->OpMode == OPMODE_STA) && INFRA_ON(pAd) && (OneSecTxNoRetryOkCount < 2) && // no heavy traffic
+ /* */
+ /* decide ChannelQuality based on: 1)last BEACON received time, 2)last RSSI, 3)TxPER, and 4)RxPER */
+ /* */
+ if ((pAd->OpMode == OPMODE_STA) && INFRA_ON(pAd) && (OneSecTxNoRetryOkCount < 2) && /* no heavy traffic */
((pAd->StaCfg.LastBeaconRxTime + BeaconLostTime) < Now32)) {
DBGPRINT(RT_DEBUG_TRACE,
("BEACON lost > %ld msec with TxOkCnt=%ld -> CQI=0\n",
BeaconLostTime, TxOkCnt));
ChannelQuality = 0;
} else {
- // Normalize Rssi
+ /* Normalize Rssi */
if (MaxRssi > -40)
NorRssi = 100;
else if (MaxRssi < -90)
else
NorRssi = (MaxRssi + 90) * 2;
- // ChannelQuality = W1*RSSI + W2*TxPRR + W3*RxPER (RSSI 0..100), (TxPER 100..0), (RxPER 100..0)
+ /* ChannelQuality = W1*RSSI + W2*TxPRR + W3*RxPER (RSSI 0..100), (TxPER 100..0), (RxPER 100..0) */
ChannelQuality = (RSSI_WEIGHTING * NorRssi +
TX_WEIGHTING * (100 - TxPRR) +
RX_WEIGHTING * (100 - RxPER)) / 100;
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID MlmeSetTxPreamble(IN PRTMP_ADAPTER pAd, IN USHORT TxPreamble)
{
AUTO_RSP_CFG_STRUC csr4;
- //
- // Always use Long preamble before verifiation short preamble functionality works well.
- // Todo: remove the following line if short preamble functionality works
- //
- //TxPreamble = Rt802_11PreambleLong;
+ /* */
+ /* Always use Long preamble before verifiation short preamble functionality works well. */
+ /* Todo: remove the following line if short preamble functionality works */
+ /* */
+ /*TxPreamble = Rt802_11PreambleLong; */
RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
if (TxPreamble == Rt802_11PreambleLong) {
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
csr4.field.AutoResponderPreamble = 0;
} else {
- // NOTE: 1Mbps should always use long preamble
+ /* NOTE: 1Mbps should always use long preamble */
DBGPRINT(RT_DEBUG_TRACE,
("MlmeSetTxPreamble (= SHORT PREAMBLE)\n"));
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
ULONG bitmap = pAdapter->CommonCfg.BasicRateBitmap;
/* if A mode, always use fix BasicRateBitMap */
- //if (pAdapter->CommonCfg.Channel == PHY_11A)
+ /*if (pAdapter->CommonCfg.Channel == PHY_11A) */
if (pAdapter->CommonCfg.Channel > 14)
pAdapter->CommonCfg.BasicRateBitmap = 0x150; /* 6, 12, 24M */
/* End of if */
} /* End of for */
} /* End of UpdateBasicRateBitmap */
-// IRQL = PASSIVE_LEVEL
-// IRQL = DISPATCH_LEVEL
-// bLinkUp is to identify the inital link speed.
-// TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps.
+/* IRQL = PASSIVE_LEVEL */
+/* IRQL = DISPATCH_LEVEL */
+/* bLinkUp is to identify the inital link speed. */
+/* TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps. */
VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
{
int i, num;
BOOLEAN *auto_rate_cur_p;
UCHAR HtMcs = MCS_AUTO;
- // find max desired rate
+ /* find max desired rate */
UpdateBasicRateBitmap(pAd);
num = 0;
Rate = RATE_54;
num++;
break;
- //default: Rate = RATE_1; break;
+ /*default: Rate = RATE_1; break; */
}
if (MaxDesire < Rate)
MaxDesire = Rate;
}
-//===========================================================================
-//===========================================================================
+/*=========================================================================== */
+/*=========================================================================== */
{
pHtPhy = &pAd->StaCfg.HTPhyMode;
pMaxHtPhy = &pAd->StaCfg.MaxHTPhyMode;
pMaxHtPhy->word = 0;
pHtPhy->word = 0;
- // Auto rate switching is enabled only if more than one DESIRED RATES are
- // specified; otherwise disabled
+ /* Auto rate switching is enabled only if more than one DESIRED RATES are */
+ /* specified; otherwise disabled */
if (num <= 1) {
- //OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
- //pAd->CommonCfg.bAutoTxRateSwitch = FALSE;
+ /*OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); */
+ /*pAd->CommonCfg.bAutoTxRateSwitch = FALSE; */
*auto_rate_cur_p = FALSE;
} else {
- //OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
- //pAd->CommonCfg.bAutoTxRateSwitch = TRUE;
+ /*OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); */
+ /*pAd->CommonCfg.bAutoTxRateSwitch = TRUE; */
*auto_rate_cur_p = TRUE;
}
if (HtMcs != MCS_AUTO) {
- //OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
- //pAd->CommonCfg.bAutoTxRateSwitch = FALSE;
+ /*OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); */
+ /*pAd->CommonCfg.bAutoTxRateSwitch = FALSE; */
*auto_rate_cur_p = FALSE;
} else {
- //OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
- //pAd->CommonCfg.bAutoTxRateSwitch = TRUE;
+ /*OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); */
+ /*pAd->CommonCfg.bAutoTxRateSwitch = TRUE; */
*auto_rate_cur_p = TRUE;
}
ExtRateLen = pAd->CommonCfg.ExtRateLen;
}
- // find max supported rate
+ /* find max supported rate */
for (i = 0; i < SupRateLen; i++) {
switch (pSupRate[i] & 0x7f) {
case 2:
RTMP_IO_WRITE32(pAd, LEGACY_BASIC_RATE, BasicRateBitmap);
- // bug fix
- // pAd->CommonCfg.BasicRateBitmap = BasicRateBitmap;
+ /* bug fix */
+ /* pAd->CommonCfg.BasicRateBitmap = BasicRateBitmap; */
- // calculate the exptected ACK rate for each TX rate. This info is used to caculate
- // the DURATION field of outgoing uniicast DATA/MGMT frame
+ /* calculate the exptected ACK rate for each TX rate. This info is used to caculate */
+ /* the DURATION field of outgoing uniicast DATA/MGMT frame */
for (i = 0; i < MAX_LEN_OF_SUPPORTED_RATES; i++) {
if (BasicRateBitmap & (0x01 << i))
CurrBasicRate = (UCHAR) i;
DBGPRINT(RT_DEBUG_TRACE,
("MlmeUpdateTxRates[MaxSupport = %d] = MaxDesire %d Mbps\n",
RateIdToMbps[MaxSupport], RateIdToMbps[MaxDesire]));
- // max tx rate = min {max desire rate, max supported rate}
+ /* max tx rate = min {max desire rate, max supported rate} */
if (MaxSupport < MaxDesire)
pAd->CommonCfg.MaxTxRate = MaxSupport;
else
pAd->CommonCfg.MaxTxRate = MaxDesire;
pAd->CommonCfg.MinTxRate = MinSupport;
- // 2003-07-31 john - 2500 doesn't have good sensitivity at high OFDM rates. to increase the success
- // ratio of initial DHCP packet exchange, TX rate starts from a lower rate depending
- // on average RSSI
- // 1. RSSI >= -70db, start at 54 Mbps (short distance)
- // 2. -70 > RSSI >= -75, start at 24 Mbps (mid distance)
- // 3. -75 > RSSI, start at 11 Mbps (long distance)
- //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)/* &&
- // OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)*/)
+ /* 2003-07-31 john - 2500 doesn't have good sensitivity at high OFDM rates. to increase the success */
+ /* ratio of initial DHCP packet exchange, TX rate starts from a lower rate depending */
+ /* on average RSSI */
+ /* 1. RSSI >= -70db, start at 54 Mbps (short distance) */
+ /* 2. -70 > RSSI >= -75, start at 24 Mbps (mid distance) */
+ /* 3. -75 > RSSI, start at 11 Mbps (long distance) */
if (*auto_rate_cur_p) {
short dbm = 0;
else if (dbm < -70)
pAd->CommonCfg.TxRate = RATE_24;
- // should never exceed MaxTxRate (consider 11B-only mode)
+ /* should never exceed MaxTxRate (consider 11B-only mode) */
if (pAd->CommonCfg.TxRate > pAd->CommonCfg.MaxTxRate)
pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;
pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
-//#ifdef WIFI_TEST
+/*#ifdef WIFI_TEST */
pAd->CommonCfg.RtsRate = RATE_11;
-//#else
-// pAd->CommonCfg.RtsRate = RATE_1;
-//#endif
+/*#else */
+/* pAd->CommonCfg.RtsRate = RATE_1; */
+/*#endif */
break;
case PHY_11G:
case PHY_11A:
OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
}
break;
- default: // error
+ default: /* error */
pAd->CommonCfg.MlmeRate = RATE_6;
pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
pAd->CommonCfg.MlmeTransmit.field.MCS =
pAd->CommonCfg.RtsRate = RATE_1;
break;
}
- //
- // Keep Basic Mlme Rate.
- //
+ /* */
+ /* Keep Basic Mlme Rate. */
+ /* */
pAd->MacTab.Content[MCAST_WCID].HTPhyMode.word =
pAd->CommonCfg.MlmeTransmit.word;
if (pAd->CommonCfg.MlmeTransmit.field.MODE == MODE_OFDM)
*/
VOID MlmeUpdateHtTxRates(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
{
- UCHAR StbcMcs; //j, StbcMcs, bitmask;
- CHAR i; // 3*3
+ UCHAR StbcMcs; /*j, StbcMcs, bitmask; */
+ CHAR i; /* 3*3 */
RT_HT_CAPABILITY *pRtHtCap = NULL;
RT_HT_PHY_INFO *pActiveHtPhy = NULL;
ULONG BasicMCS;
pMaxHtPhy->field.STBC = STBC_NONE;
}
- // Decide MAX ht rate.
+ /* Decide MAX ht rate. */
if ((pRtHtCap->GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
pMaxHtPhy->field.MODE = MODE_HTGREENFIELD;
else
pMaxHtPhy->field.MCS = 32;
}
- for (i = 23; i >= 0; i--) // 3*3
+ for (i = 23; i >= 0; i--) /* 3*3 */
{
j = i / 8;
bitmask = (1 << (i - (j * 8)));
break;
}
- // Copy MIN ht rate. rt2860???
+ /* Copy MIN ht rate. rt2860??? */
pMinHtPhy->field.BW = BW_20;
pMinHtPhy->field.MCS = 0;
pMinHtPhy->field.STBC = 0;
pMinHtPhy->field.ShortGI = 0;
- //If STA assigns fixed rate. update to fixed here.
+ /*If STA assigns fixed rate. update to fixed here. */
if ((pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff)) {
if (pDesireHtPhy->MCSSet[4] != 0) {
pMaxHtPhy->field.MCS = 32;
pMinHtPhy->field.MCS));
}
- for (i = 23; (CHAR) i >= 0; i--) // 3*3
+ for (i = 23; (CHAR) i >= 0; i--) /* 3*3 */
{
j = i / 8;
bitmask = (1 << (i - (j * 8)));
}
}
- // Decide ht rate
+ /* Decide ht rate */
pHtPhy->field.STBC = pMaxHtPhy->field.STBC;
pHtPhy->field.BW = pMaxHtPhy->field.BW;
pHtPhy->field.MODE = pMaxHtPhy->field.MODE;
pHtPhy->field.MCS = pMaxHtPhy->field.MCS;
pHtPhy->field.ShortGI = pMaxHtPhy->field.ShortGI;
- // use default now. rt2860
+ /* use default now. rt2860 */
if (pDesireHtPhy->MCSSet[0] != 0xff)
*auto_rate_cur_p = FALSE;
else
}
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID MlmeRadioOff(IN PRTMP_ADAPTER pAd)
{
RTMP_MLME_RADIO_OFF(pAd);
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID MlmeRadioOn(IN PRTMP_ADAPTER pAd)
{
RTMP_MLME_RADIO_ON(pAd);
}
-// ===========================================================================================
-// bss_table.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* bss_table.c */
+/* =========================================================================================== */
/*! \brief initialize BSS table
* \param p_tab pointer to the table
Tab->BssOverlapNr = 0;
for (i = 0; i < MAX_LEN_OF_BSS_TABLE; i++) {
NdisZeroMemory(&Tab->BssEntry[i], sizeof(BSS_ENTRY));
- Tab->BssEntry[i].Rssi = -127; // initial the rssi as a minimum value
+ Tab->BssEntry[i].Rssi = -127; /* initial the rssi as a minimum value */
}
}
UCHAR i;
for (i = 0; i < Tab->BssNr; i++) {
- //
- // Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
- // We should distinguish this case.
- //
+ /* */
+ /* Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G. */
+ /* We should distinguish this case. */
+ /* */
if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid)) {
UCHAR i;
for (i = 0; i < Tab->BssNr; i++) {
- //
- // Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
- // We should distinguish this case.
- //
+ /* */
+ /* Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G. */
+ /* We should distinguish this case. */
+ /* */
if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid) &&
return (ULONG) BSS_NOT_FOUND;
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID BssTableDeleteEntry(IN OUT BSS_TABLE * Tab,
IN PUCHAR pBssid, IN UCHAR Channel)
{
DBGPRINT(RT_DEBUG_TRACE,
("BATableDeleteORIEntry numAsOriginator= %ld\n",
pAd->BATable.numAsRecipient));
- // Erase Bitmap flag.
+ /* Erase Bitmap flag. */
}
- pAd->MacTab.Content[pBAORIEntry->Wcid].TXBAbitmap &= (~(1 << (pBAORIEntry->TID))); // If STA mode, erase flag here
- pAd->MacTab.Content[pBAORIEntry->Wcid].BAOriWcidArray[pBAORIEntry->TID] = 0; // If STA mode, erase flag here
+ pAd->MacTab.Content[pBAORIEntry->Wcid].TXBAbitmap &= (~(1 << (pBAORIEntry->TID))); /* If STA mode, erase flag here */
+ pAd->MacTab.Content[pBAORIEntry->Wcid].BAOriWcidArray[pBAORIEntry->TID] = 0; /* If STA mode, erase flag here */
pBAORIEntry->ORI_BA_Status = Originator_NONE;
pBAORIEntry->Token = 1;
- // Not clear Sequence here.
+ /* Not clear Sequence here. */
NdisReleaseSpinLock(&pAd->BATabLock);
}
}
IRQL = DISPATCH_LEVEL
*/
-VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM pCfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE
+VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM pCfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */
IN UCHAR HtCapabilityLen,
IN UCHAR AddHtInfoLen,
IN UCHAR NewExtChanOffset,
IN USHORT LengthVIE, IN PNDIS_802_11_VARIABLE_IEs pVIE)
{
COPY_MAC_ADDR(pBss->Bssid, pBssid);
- // Default Hidden SSID to be TRUE, it will be turned to FALSE after coping SSID
+ /* Default Hidden SSID to be TRUE, it will be turned to FALSE after coping SSID */
pBss->Hidden = 1;
if (SsidLen > 0) {
- // For hidden SSID AP, it might send beacon with SSID len equal to 0
- // Or send beacon /probe response with SSID len matching real SSID length,
- // but SSID is all zero. such as "00-00-00-00" with length 4.
- // We have to prevent this case overwrite correct table
+ /* For hidden SSID AP, it might send beacon with SSID len equal to 0 */
+ /* Or send beacon /probe response with SSID len matching real SSID length, */
+ /* but SSID is all zero. such as "00-00-00-00" with length 4. */
+ /* We have to prevent this case overwrite correct table */
if (NdisEqualMemory(Ssid, ZeroSsid, SsidLen) == 0) {
NdisZeroMemory(pBss->Ssid, MAX_LEN_OF_SSID);
NdisMoveMemory(pBss->Ssid, Ssid, SsidLen);
}
pBss->CapabilityInfo = CapabilityInfo;
- // The privacy bit indicate security is ON, it maight be WEP, TKIP or AES
- // Combine with AuthMode, they will decide the connection methods.
+ /* The privacy bit indicate security is ON, it maight be WEP, TKIP or AES */
+ /* Combine with AuthMode, they will decide the connection methods. */
pBss->Privacy = CAP_IS_PRIVACY_ON(pBss->CapabilityInfo);
ASSERT(SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES);
if (SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES)
pBss->Channel = Channel;
pBss->CentralChannel = Channel;
pBss->Rssi = Rssi;
- // Update CkipFlag. if not exists, the value is 0x0
+ /* Update CkipFlag. if not exists, the value is 0x0 */
pBss->CkipFlag = CkipFlag;
- // New for microsoft Fixed IEs
+ /* New for microsoft Fixed IEs */
NdisMoveMemory(pBss->FixIEs.Timestamp, &TimeStamp, 8);
pBss->FixIEs.BeaconInterval = BeaconPeriod;
pBss->FixIEs.Capabilities = CapabilityInfo;
- // New for microsoft Variable IEs
+ /* New for microsoft Variable IEs */
if (LengthVIE != 0) {
pBss->VarIELen = LengthVIE;
NdisMoveMemory(pBss->VarIEs, pVIE, pBss->VarIELen);
BssCipherParse(pBss);
- // new for QOS
+ /* new for QOS */
if (pEdcaParm)
NdisMoveMemory(&pBss->EdcaParm, pEdcaParm, sizeof(EDCA_PARM));
else
}
break;
}
- Length = Length + 2 + (USHORT) pEid->Len; // Eid[1] + Len[1]+ content[Len]
+ Length = Length + 2 + (USHORT) pEid->Len; /* Eid[1] + Len[1]+ content[Len] */
pEid = (PEID_STRUCT) ((UCHAR *) pEid + 2 + pEid->Len);
}
}
IRQL = DISPATCH_LEVEL
*/
-ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT BSS_TABLE * Tab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE
+ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT BSS_TABLE * Tab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */
IN UCHAR HtCapabilityLen,
IN UCHAR AddHtInfoLen,
IN UCHAR NewExtChanOffset,
ChannelNo);
if (Idx == BSS_NOT_FOUND) {
if (Tab->BssNr >= MAX_LEN_OF_BSS_TABLE) {
- //
- // It may happen when BSS Table was full.
- // The desired AP will not be added into BSS Table
- // In this case, if we found the desired AP then overwrite BSS Table.
- //
+ /* */
+ /* It may happen when BSS Table was full. */
+ /* The desired AP will not be added into BSS Table */
+ /* In this case, if we found the desired AP then overwrite BSS Table. */
+ /* */
if (!OPSTATUS_TEST_FLAG
(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) {
if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, pBssid)
return Idx;
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
OUT BSS_TABLE * OutTab, IN CHAR Ssid[], IN UCHAR SsidLen)
{
|| bIsHiddenApIncluded)) {
BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
- // 2.4G/5G N only mode
+ /* 2.4G/5G N only mode */
if ((pInBss->HtCapabilityLen == 0) &&
((pAd->CommonCfg.PhyMode == PHY_11N_2_4G)
|| (pAd->CommonCfg.PhyMode == PHY_11N_5G))) {
("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
continue;
}
- // New for WPA2
- // Check the Authmode first
+ /* New for WPA2 */
+ /* Check the Authmode first */
if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) {
- // Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
+ /* Check AuthMode and AuthModeAux for matching, in case AP support dual-mode */
if ((pAd->StaCfg.AuthMode != pInBss->AuthMode)
&& (pAd->StaCfg.AuthMode !=
pInBss->AuthModeAux))
- // None matched
+ /* None matched */
continue;
- // Check cipher suite, AP must have more secured cipher than station setting
+ /* Check cipher suite, AP must have more secured cipher than station setting */
if ((pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeWPA)
|| (pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeWPAPSK)) {
- // If it's not mixed mode, we should only let BSS pass with the same encryption
+ /* If it's not mixed mode, we should only let BSS pass with the same encryption */
if (pInBss->WPA.bMixMode == FALSE)
if (pAd->StaCfg.WepStatus !=
pInBss->WPA.GroupCipher)
continue;
- // check group cipher
+ /* check group cipher */
if ((pAd->StaCfg.WepStatus <
pInBss->WPA.GroupCipher)
&& (pInBss->WPA.GroupCipher !=
Ndis802_11GroupWEP104Enabled))
continue;
- // check pairwise cipher, skip if none matched
- // If profile set to AES, let it pass without question.
- // If profile set to TKIP, we must find one mateched
+ /* check pairwise cipher, skip if none matched */
+ /* If profile set to AES, let it pass without question. */
+ /* If profile set to TKIP, we must find one mateched */
if ((pAd->StaCfg.WepStatus ==
Ndis802_11Encryption2Enabled)
&& (pAd->StaCfg.WepStatus !=
Ndis802_11AuthModeWPA2)
|| (pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeWPA2PSK)) {
- // If it's not mixed mode, we should only let BSS pass with the same encryption
+ /* If it's not mixed mode, we should only let BSS pass with the same encryption */
if (pInBss->WPA2.bMixMode == FALSE)
if (pAd->StaCfg.WepStatus !=
pInBss->WPA2.GroupCipher)
continue;
- // check group cipher
+ /* check group cipher */
if ((pAd->StaCfg.WepStatus <
pInBss->WPA.GroupCipher)
&& (pInBss->WPA2.GroupCipher !=
Ndis802_11GroupWEP104Enabled))
continue;
- // check pairwise cipher, skip if none matched
- // If profile set to AES, let it pass without question.
- // If profile set to TKIP, we must find one mateched
+ /* check pairwise cipher, skip if none matched */
+ /* If profile set to AES, let it pass without question. */
+ /* If profile set to TKIP, we must find one mateched */
if ((pAd->StaCfg.WepStatus ==
Ndis802_11Encryption2Enabled)
&& (pAd->StaCfg.WepStatus !=
continue;
}
}
- // Bss Type matched, SSID matched.
- // We will check wepstatus for qualification Bss
+ /* Bss Type matched, SSID matched. */
+ /* We will check wepstatus for qualification Bss */
else if (pAd->StaCfg.WepStatus != pInBss->WepStatus) {
DBGPRINT(RT_DEBUG_TRACE,
("StaCfg.WepStatus=%d, while pInBss->WepStatus=%d\n",
pAd->StaCfg.WepStatus,
pInBss->WepStatus));
- //
- // For the SESv2 case, we will not qualify WepStatus.
- //
+ /* */
+ /* For the SESv2 case, we will not qualify WepStatus. */
+ /* */
if (!pInBss->bSES)
continue;
}
- // Since the AP is using hidden SSID, and we are trying to connect to ANY
- // It definitely will fail. So, skip it.
- // CCX also require not even try to connect it!!
+ /* Since the AP is using hidden SSID, and we are trying to connect to ANY */
+ /* It definitely will fail. So, skip it. */
+ /* CCX also require not even try to connect it!! */
if (SsidLen == 0)
continue;
- // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
- // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
+ /* If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region */
+ /* If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, */
if ((pInBss->CentralChannel != pInBss->Channel) &&
(pAd->CommonCfg.RegTransmitSetting.field.BW ==
BW_40)) {
}
}
}
- // copy matching BSS from InTab to OutTab
+ /* copy matching BSS from InTab to OutTab */
NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
OutTab->BssNr++;
&& (SsidLen == 0)) {
BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
- // 2.4G/5G N only mode
+ /* 2.4G/5G N only mode */
if ((pInBss->HtCapabilityLen == 0) &&
((pAd->CommonCfg.PhyMode == PHY_11N_2_4G)
|| (pAd->CommonCfg.PhyMode == PHY_11N_5G))) {
("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
continue;
}
- // New for WPA2
- // Check the Authmode first
+ /* New for WPA2 */
+ /* Check the Authmode first */
if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) {
- // Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
+ /* Check AuthMode and AuthModeAux for matching, in case AP support dual-mode */
if ((pAd->StaCfg.AuthMode != pInBss->AuthMode)
&& (pAd->StaCfg.AuthMode !=
pInBss->AuthModeAux))
- // None matched
+ /* None matched */
continue;
- // Check cipher suite, AP must have more secured cipher than station setting
+ /* Check cipher suite, AP must have more secured cipher than station setting */
if ((pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeWPA)
|| (pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeWPAPSK)) {
- // If it's not mixed mode, we should only let BSS pass with the same encryption
+ /* If it's not mixed mode, we should only let BSS pass with the same encryption */
if (pInBss->WPA.bMixMode == FALSE)
if (pAd->StaCfg.WepStatus !=
pInBss->WPA.GroupCipher)
continue;
- // check group cipher
+ /* check group cipher */
if (pAd->StaCfg.WepStatus <
pInBss->WPA.GroupCipher)
continue;
- // check pairwise cipher, skip if none matched
- // If profile set to AES, let it pass without question.
- // If profile set to TKIP, we must find one mateched
+ /* check pairwise cipher, skip if none matched */
+ /* If profile set to AES, let it pass without question. */
+ /* If profile set to TKIP, we must find one mateched */
if ((pAd->StaCfg.WepStatus ==
Ndis802_11Encryption2Enabled)
&& (pAd->StaCfg.WepStatus !=
Ndis802_11AuthModeWPA2)
|| (pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeWPA2PSK)) {
- // If it's not mixed mode, we should only let BSS pass with the same encryption
+ /* If it's not mixed mode, we should only let BSS pass with the same encryption */
if (pInBss->WPA2.bMixMode == FALSE)
if (pAd->StaCfg.WepStatus !=
pInBss->WPA2.GroupCipher)
continue;
- // check group cipher
+ /* check group cipher */
if (pAd->StaCfg.WepStatus <
pInBss->WPA2.GroupCipher)
continue;
- // check pairwise cipher, skip if none matched
- // If profile set to AES, let it pass without question.
- // If profile set to TKIP, we must find one mateched
+ /* check pairwise cipher, skip if none matched */
+ /* If profile set to AES, let it pass without question. */
+ /* If profile set to TKIP, we must find one mateched */
if ((pAd->StaCfg.WepStatus ==
Ndis802_11Encryption2Enabled)
&& (pAd->StaCfg.WepStatus !=
continue;
}
}
- // Bss Type matched, SSID matched.
- // We will check wepstatus for qualification Bss
+ /* Bss Type matched, SSID matched. */
+ /* We will check wepstatus for qualification Bss */
else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
continue;
- // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
- // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
+ /* If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region */
+ /* If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, */
if ((pInBss->CentralChannel != pInBss->Channel) &&
(pAd->CommonCfg.RegTransmitSetting.field.BW ==
BW_40)) {
BW = BW_40;
}
}
- // copy matching BSS from InTab to OutTab
+ /* copy matching BSS from InTab to OutTab */
NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
OutTab->BssNr++;
BssTableSortByRssi(OutTab);
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID BssTableSortByRssi(IN OUT BSS_TABLE * OutTab)
{
INT i, j;
INT Length;
NDIS_802_11_ENCRYPTION_STATUS TmpCipher;
- //
- // WepStatus will be reset later, if AP announce TKIP or AES on the beacon frame.
- //
+ /* */
+ /* WepStatus will be reset later, if AP announce TKIP or AES on the beacon frame. */
+ /* */
if (pBss->Privacy) {
pBss->WepStatus = Ndis802_11WEPEnabled;
} else {
pBss->WepStatus = Ndis802_11WEPDisabled;
}
- // Set default to disable & open authentication before parsing variable IE
+ /* Set default to disable & open authentication before parsing variable IE */
pBss->AuthMode = Ndis802_11AuthModeOpen;
pBss->AuthModeAux = Ndis802_11AuthModeOpen;
- // Init WPA setting
+ /* Init WPA setting */
pBss->WPA.PairCipher = Ndis802_11WEPDisabled;
pBss->WPA.PairCipherAux = Ndis802_11WEPDisabled;
pBss->WPA.GroupCipher = Ndis802_11WEPDisabled;
pBss->WPA.RsnCapability = 0;
pBss->WPA.bMixMode = FALSE;
- // Init WPA2 setting
+ /* Init WPA2 setting */
pBss->WPA2.PairCipher = Ndis802_11WEPDisabled;
pBss->WPA2.PairCipherAux = Ndis802_11WEPDisabled;
pBss->WPA2.GroupCipher = Ndis802_11WEPDisabled;
Length = (INT) pBss->VarIELen;
while (Length > 0) {
- // Parse cipher suite base on WPA1 & WPA2, they should be parsed differently
+ /* Parse cipher suite base on WPA1 & WPA2, they should be parsed differently */
pTmp = ((PUCHAR) pBss->VarIEs) + pBss->VarIELen - Length;
pEid = (PEID_STRUCT) pTmp;
switch (pEid->Eid) {
break;
} else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4) !=
1) {
- // if unsupported vendor specific IE
+ /* if unsupported vendor specific IE */
break;
}
- // Skip OUI, version, and multicast suite
- // This part should be improved in the future when AP supported multiple cipher suite.
- // For now, it's OK since almost all APs have fixed cipher suite supported.
- // pTmp = (PUCHAR) pEid->Octet;
+ /* Skip OUI, version, and multicast suite */
+ /* This part should be improved in the future when AP supported multiple cipher suite. */
+ /* For now, it's OK since almost all APs have fixed cipher suite supported. */
+ /* pTmp = (PUCHAR) pEid->Octet; */
pTmp += 11;
- // Cipher Suite Selectors from Spec P802.11i/D3.2 P26.
- // Value Meaning
- // 0 None
- // 1 WEP-40
- // 2 Tkip
- // 3 WRAP
- // 4 AES
- // 5 WEP-104
- // Parse group cipher
+ /* Cipher Suite Selectors from Spec P802.11i/D3.2 P26. */
+ /* Value Meaning */
+ /* 0 None */
+ /* 1 WEP-40 */
+ /* 2 Tkip */
+ /* 3 WRAP */
+ /* 4 AES */
+ /* 5 WEP-104 */
+ /* Parse group cipher */
switch (*pTmp) {
case 1:
pBss->WPA.GroupCipher =
default:
break;
}
- // number of unicast suite
+ /* number of unicast suite */
pTmp += 1;
- // skip all unicast cipher suites
- //Count = *(PUSHORT) pTmp;
+ /* skip all unicast cipher suites */
+ /*Count = *(PUSHORT) pTmp; */
Count = (pTmp[1] << 8) + pTmp[0];
pTmp += sizeof(USHORT);
- // Parsing all unicast cipher suite
+ /* Parsing all unicast cipher suite */
while (Count > 0) {
- // Skip OUI
+ /* Skip OUI */
pTmp += 3;
TmpCipher = Ndis802_11WEPDisabled;
switch (*pTmp) {
case 1:
- case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
+ case 5: /* Although WEP is not allowed in WPA related auth mode, we parse it anyway */
TmpCipher =
Ndis802_11Encryption1Enabled;
break;
break;
}
if (TmpCipher > pBss->WPA.PairCipher) {
- // Move the lower cipher suite to PairCipherAux
+ /* Move the lower cipher suite to PairCipherAux */
pBss->WPA.PairCipherAux =
pBss->WPA.PairCipher;
pBss->WPA.PairCipher = TmpCipher;
Count--;
}
- // 4. get AKM suite counts
- //Count = *(PUSHORT) pTmp;
+ /* 4. get AKM suite counts */
+ /*Count = *(PUSHORT) pTmp; */
Count = (pTmp[1] << 8) + pTmp[0];
pTmp += sizeof(USHORT);
pTmp += 3;
switch (*pTmp) {
case 1:
- // Set AP support WPA-enterprise mode
+ /* Set AP support WPA-enterprise mode */
if (pBss->AuthMode == Ndis802_11AuthModeOpen)
pBss->AuthMode = Ndis802_11AuthModeWPA;
else
Ndis802_11AuthModeWPA;
break;
case 2:
- // Set AP support WPA-PSK mode
+ /* Set AP support WPA-PSK mode */
if (pBss->AuthMode == Ndis802_11AuthModeOpen)
pBss->AuthMode =
Ndis802_11AuthModeWPAPSK;
}
pTmp += 1;
- // Fixed for WPA-None
+ /* Fixed for WPA-None */
if (pBss->BssType == BSS_ADHOC) {
pBss->AuthMode = Ndis802_11AuthModeWPANone;
pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
pBss->WepStatus = pBss->WPA.GroupCipher;
- // Patched bugs for old driver
+ /* Patched bugs for old driver */
if (pBss->WPA.PairCipherAux ==
Ndis802_11WEPDisabled)
pBss->WPA.PairCipherAux =
} else
pBss->WepStatus = pBss->WPA.PairCipher;
- // Check the Pair & Group, if different, turn on mixed mode flag
+ /* Check the Pair & Group, if different, turn on mixed mode flag */
if (pBss->WPA.GroupCipher != pBss->WPA.PairCipher)
pBss->WPA.bMixMode = TRUE;
case IE_RSN:
pRsnHeader = (PRSN_IE_HEADER_STRUCT) pTmp;
- // 0. Version must be 1
+ /* 0. Version must be 1 */
if (le2cpu16(pRsnHeader->Version) != 1)
break;
pTmp += sizeof(RSN_IE_HEADER_STRUCT);
- // 1. Check group cipher
+ /* 1. Check group cipher */
pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
break;
- // Parse group cipher
+ /* Parse group cipher */
switch (pCipher->Type) {
case 1:
pBss->WPA2.GroupCipher =
default:
break;
}
- // set to correct offset for next parsing
+ /* set to correct offset for next parsing */
pTmp += sizeof(CIPHER_SUITE_STRUCT);
- // 2. Get pairwise cipher counts
- //Count = *(PUSHORT) pTmp;
+ /* 2. Get pairwise cipher counts */
+ /*Count = *(PUSHORT) pTmp; */
Count = (pTmp[1] << 8) + pTmp[0];
pTmp += sizeof(USHORT);
- // 3. Get pairwise cipher
- // Parsing all unicast cipher suite
+ /* 3. Get pairwise cipher */
+ /* Parsing all unicast cipher suite */
while (Count > 0) {
- // Skip OUI
+ /* Skip OUI */
pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
TmpCipher = Ndis802_11WEPDisabled;
switch (pCipher->Type) {
case 1:
- case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
+ case 5: /* Although WEP is not allowed in WPA related auth mode, we parse it anyway */
TmpCipher =
Ndis802_11Encryption1Enabled;
break;
break;
}
if (TmpCipher > pBss->WPA2.PairCipher) {
- // Move the lower cipher suite to PairCipherAux
+ /* Move the lower cipher suite to PairCipherAux */
pBss->WPA2.PairCipherAux =
pBss->WPA2.PairCipher;
pBss->WPA2.PairCipher = TmpCipher;
Count--;
}
- // 4. get AKM suite counts
- //Count = *(PUSHORT) pTmp;
+ /* 4. get AKM suite counts */
+ /*Count = *(PUSHORT) pTmp; */
Count = (pTmp[1] << 8) + pTmp[0];
pTmp += sizeof(USHORT);
- // 5. Get AKM ciphers
- // Parsing all AKM ciphers
+ /* 5. Get AKM ciphers */
+ /* Parsing all AKM ciphers */
while (Count > 0) {
pAKM = (PAKM_SUITE_STRUCT) pTmp;
if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
switch (pAKM->Type) {
case 1:
- // Set AP support WPA-enterprise mode
+ /* Set AP support WPA-enterprise mode */
if (pBss->AuthMode ==
Ndis802_11AuthModeOpen)
pBss->AuthMode =
Ndis802_11AuthModeWPA2;
break;
case 2:
- // Set AP support WPA-PSK mode
+ /* Set AP support WPA-PSK mode */
if (pBss->AuthMode ==
Ndis802_11AuthModeOpen)
pBss->AuthMode =
Count--;
}
- // Fixed for WPA-None
+ /* Fixed for WPA-None */
if (pBss->BssType == BSS_ADHOC) {
pBss->AuthMode = Ndis802_11AuthModeWPANone;
pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
pBss->WPA2.PairCipherAux;
pBss->WPA.GroupCipher = pBss->WPA2.GroupCipher;
pBss->WepStatus = pBss->WPA.GroupCipher;
- // Patched bugs for old driver
+ /* Patched bugs for old driver */
if (pBss->WPA.PairCipherAux ==
Ndis802_11WEPDisabled)
pBss->WPA.PairCipherAux =
}
pBss->WepStatus = pBss->WPA2.PairCipher;
- // 6. Get RSN capability
- //pBss->WPA2.RsnCapability = *(PUSHORT) pTmp;
+ /* 6. Get RSN capability */
+ /*pBss->WPA2.RsnCapability = *(PUSHORT) pTmp; */
pBss->WPA2.RsnCapability = (pTmp[1] << 8) + pTmp[0];
pTmp += sizeof(USHORT);
- // Check the Pair & Group, if different, turn on mixed mode flag
+ /* Check the Pair & Group, if different, turn on mixed mode flag */
if (pBss->WPA2.GroupCipher != pBss->WPA2.PairCipher)
pBss->WPA2.bMixMode = TRUE;
}
}
-// ===========================================================================================
-// mac_table.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* mac_table.c */
+/* =========================================================================================== */
/*! \brief generates a random mac address value for IBSS BSSID
* \param Addr the bssid location
pAddr[i] = RandomByte(pAd);
}
- pAddr[0] = (pAddr[0] & 0xfe) | 0x02; // the first 2 bits must be 01xxxxxxxx
+ pAddr[0] = (pAddr[0] & 0xfe) | 0x02; /* the first 2 bits must be 01xxxxxxxx */
}
/*! \brief init the management mac frame header
pHdr80211->FC.Type = BTYPE_MGMT;
pHdr80211->FC.SubType = SubType;
-// if (SubType == SUBTYPE_ACK) // sample, no use, it will conflict with ACTION frame sub type
-// pHdr80211->FC.Type = BTYPE_CNTL;
+/* if (SubType == SUBTYPE_ACK) // sample, no use, it will conflict with ACTION frame sub type */
+/* pHdr80211->FC.Type = BTYPE_CNTL; */
pHdr80211->FC.ToDs = ToDs;
COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
}
-// ===========================================================================================
-// mem_mgmt.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* mem_mgmt.c */
+/* =========================================================================================== */
/*!***************************************************************************
* This routine build an outgoing frame, and fill all information specified
ULONG TotLeng;
va_list Args;
- // calculates the total length
+ /* calculates the total length */
TotLeng = 0;
va_start(Args, FrameLen);
do {
return TotLeng;
}
-// ===========================================================================================
-// mlme_queue.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* mlme_queue.c */
+/* =========================================================================================== */
/*! \brief Initialize The MLME Queue, used by MLME Functions
* \param *Queue The MLME Queue
INT Tail;
MLME_QUEUE *Queue = (MLME_QUEUE *) & pAd->Mlme.Queue;
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
return FALSE;
- // First check the size, it MUST not exceed the mlme queue size
+ /* First check the size, it MUST not exceed the mlme queue size */
if (MsgLen > MGMT_DMA_BUFFER_SIZE) {
DBGPRINT_ERR(("MlmeEnqueue: msg too large, size = %ld \n",
MsgLen));
INT MsgType;
MLME_QUEUE *Queue = (MLME_QUEUE *) & pAd->Mlme.Queue;
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd,
fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) {
DBGPRINT_ERR(("MlmeEnqueueForRecv: fRTMP_ADAPTER_HALT_IN_PROGRESS\n"));
return FALSE;
}
- // First check the size, it MUST not exceed the mlme queue size
+ /* First check the size, it MUST not exceed the mlme queue size */
if (MsgLen > MGMT_DMA_BUFFER_SIZE) {
DBGPRINT_ERR(("MlmeEnqueueForRecv: frame too large, size = %ld \n", MsgLen));
return FALSE;
}
}
- // OK, we got all the informations, it is time to put things into queue
+ /* OK, we got all the informations, it is time to put things into queue */
NdisAcquireSpinLock(&(Queue->Lock));
Tail = Queue->Tail;
Queue->Tail++;
return TRUE;
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID MlmeRestartStateMachine(IN PRTMP_ADAPTER pAd)
{
#ifdef RTMP_MAC_PCI
MLME_QUEUE_ELEM *Elem = NULL;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
BOOLEAN Cancelled;
DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
}
NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
- // Remove all Mlme queues elements
+ /* Remove all Mlme queues elements */
while (!MlmeQueueEmpty(&pAd->Mlme.Queue)) {
- //From message type, determine which state machine I should drive
+ /*From message type, determine which state machine I should drive */
if (MlmeDequeue(&pAd->Mlme.Queue, &Elem)) {
- // free MLME element
+ /* free MLME element */
Elem->Occupied = FALSE;
Elem->MsgLen = 0;
DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n"));
}
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
{
- // Cancel all timer events
- // Be careful to cancel new added timer
+ /* Cancel all timer events */
+ /* Be careful to cancel new added timer */
RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled);
}
- // Change back to original channel in case of doing scan
+ /* Change back to original channel in case of doing scan */
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
- // Resume MSDU which is turned off durning scan
+ /* Resume MSDU which is turned off durning scan */
RTMPResumeMsduTransmission(pAd);
{
- // Set all state machines back IDLE
+ /* Set all state machines back IDLE */
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
}
#ifdef RTMP_MAC_PCI
- // Remove running state
+ /* Remove running state */
NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
pAd->Mlme.bRunning = FALSE;
NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
}
/*! \brief test if the MLME Queue is empty
UCHAR EAPType;
PUCHAR pData;
- // Pointer to start of data frames including SNAP header
+ /* Pointer to start of data frames including SNAP header */
pData = (PUCHAR) pFrame + LENGTH_802_11;
- // The only data type will pass to this function is EAPOL frame
+ /* The only data type will pass to this function is EAPOL frame */
if (pFrame->Hdr.FC.Type == BTYPE_DATA) {
{
*Machine = WPA_STATE_MACHINE;
*MsgType = MT2_PEER_DISASSOC_REQ;
break;
case SUBTYPE_AUTH:
- // get the sequence number from payload 24 Mac Header + 2 bytes algorithm
+ /* get the sequence number from payload 24 Mac Header + 2 bytes algorithm */
NdisMoveMemory(&Seq, &pFrame->Octet[2], sizeof(USHORT));
NdisMoveMemory(&Alg, &pFrame->Octet[0], sizeof(USHORT));
if (Seq == 1 || Seq == 3) {
break;
case SUBTYPE_ACTION:
*Machine = ACTION_STATE_MACHINE;
- // Sometimes Sta will return with category bytes with MSB = 1, if they receive catogory out of their support
+ /* Sometimes Sta will return with category bytes with MSB = 1, if they receive catogory out of their support */
if ((pFrame->Octet[0] & 0x7F) > MAX_PEER_CATE_MSG) {
*MsgType = MT2_ACT_INVALID;
} else {
return TRUE;
}
-// ===========================================================================================
-// state_machine.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* state_machine.c */
+/* =========================================================================================== */
/*! \brief Initialize the state machine.
* \param *S pointer to the state machine
{
ULONG i, j;
- // set number of states and messages
+ /* set number of states and messages */
S->NrState = StNr;
S->NrMsg = MsgNr;
S->Base = Base;
S->TransFunc = Trans;
- // init all state transition to default function
+ /* init all state transition to default function */
for (i = 0; i < StNr; i++) {
for (j = 0; j < MsgNr; j++) {
S->TransFunc[i * MsgNr + j] = DefFunc;
}
}
- // set the starting state
+ /* set the starting state */
S->CurrState = InitState;
}
MsgIdx = Msg - S->Base;
if (St < S->NrState && MsgIdx < S->NrMsg) {
- // boundary checking before setting the action
+ /* boundary checking before setting the action */
S->TransFunc[St * S->NrMsg + MsgIdx] = Func;
}
}
{
}
-// ===========================================================================================
-// lfsr.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* lfsr.c */
+/* =========================================================================================== */
/*
==========================================================================
else
RateIdx = 12;
- // Check for support rates exclude basic rate bit
+ /* Check for support rates exclude basic rate bit */
for (i = 0; i < *SupRateLen; i++)
for (j = 0; j < RateIdx; j++)
if ((SupRate[i] & 0x7f) == RateIdTo500Kbps[j])
UCHAR UpperChannel = 0, LowerChannel = 0;
UCHAR NoEffectChannelinList = 0;
- // Find upper and lower channel according to 40MHz current operation.
+ /* Find upper and lower channel according to 40MHz current operation. */
if (CentralChannel < Channel) {
UpperChannel = Channel;
if (CentralChannel > 2)
if (Wcid >= MAX_LEN_OF_MAC_TABLE)
return FALSE;
- // If use AMSDU, set flag.
+ /* If use AMSDU, set flag. */
if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable)
CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid],
fCLIENT_STATUS_AMSDU_INUSED);
- // Save Peer Capability
+ /* Save Peer Capability */
if (pHtCapability->HtCapInfo.ShortGIfor20)
CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid],
fCLIENT_STATUS_SGI20_CAPABLE);
pAd->MacTab.Content[Wcid].MpduDensity =
pHtCapability->HtCapParm.MpduDensity;
}
- // Will check ChannelWidth for MCSSet[4] below
+ /* Will check ChannelWidth for MCSSet[4] below */
pAd->MlmeAux.HtCapability.MCSSet[4] = 0x1;
switch (pAd->CommonCfg.RxStream) {
case 1:
pAd->MlmeAux.HtCapability.HtCapInfo.GF =
pHtCapability->HtCapInfo.GF & pAd->CommonCfg.DesiredHtPhy.GF;
- // Send Assoc Req with my HT capability.
+ /* Send Assoc Req with my HT capability. */
pAd->MlmeAux.HtCapability.HtCapInfo.AMsduSize =
pAd->CommonCfg.DesiredHtPhy.AmsduSize;
pAd->MlmeAux.HtCapability.HtCapInfo.MimoPs =
}
if (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_20)
- pAd->MlmeAux.HtCapability.MCSSet[4] = 0x0; // BW20 can't transmit MCS32
+ pAd->MlmeAux.HtCapability.MCSSet[4] = 0x0; /* BW20 can't transmit MCS32 */
COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability);
return TRUE;
VOID RTMPUpdateMlmeRate(IN PRTMP_ADAPTER pAd)
{
UCHAR MinimumRate;
- UCHAR ProperMlmeRate; //= RATE_54;
- UCHAR i, j, RateIdx = 12; //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
+ UCHAR ProperMlmeRate; /*= RATE_54; */
+ UCHAR i, j, RateIdx = 12; /*1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
BOOLEAN bMatch = FALSE;
switch (pAd->CommonCfg.PhyMode) {
case PHY_11BGN_MIXED:
if ((pAd->MlmeAux.SupRateLen == 4) &&
(pAd->MlmeAux.ExtRateLen == 0))
- // B only AP
+ /* B only AP */
ProperMlmeRate = RATE_11;
else
ProperMlmeRate = RATE_24;
MinimumRate = RATE_6;
break;
case PHY_11A:
- case PHY_11N_2_4G: // rt2860 need to check mlmerate for 802.11n
+ case PHY_11N_2_4G: /* rt2860 need to check mlmerate for 802.11n */
case PHY_11GN_MIXED:
case PHY_11AGN_MIXED:
case PHY_11AN_MIXED:
else
MinimumRate = RATE_6;
break;
- default: // error
+ default: /* error */
ProperMlmeRate = RATE_1;
MinimumRate = RATE_1;
break;
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
#ifdef RT30xx
|| (pAd->EepromAccess)
-#endif // RT30xx //
+#endif /* RT30xx // */
#ifdef RT3090
|| (pAd->bPCIclkOff == TRUE)
-#endif // RT3090 //
+#endif /* RT3090 // */
)
return;
{
- //if (pAd->StaCfg.Psm == PWR_SAVE)
- // return;
+ /*if (pAd->StaCfg.Psm == PWR_SAVE) */
+ /* return; */
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
#ifdef RTMP_MAC_PCI
pAd->StaCfg.BBPR3 = BBPR3;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
if (OPSTATUS_TEST_FLAG
(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
) {
pAd->RalinkCounters.OneSecTxRetryOkCount +
pAd->RalinkCounters.OneSecTxFailCount;
- // dynamic adjust antenna evaluation period according to the traffic
+ /* dynamic adjust antenna evaluation period according to the traffic */
if (TxTotalCnt > 50) {
RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer,
20);
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
#ifdef RT30xx
|| (pAd->EepromAccess)
-#endif // RT30xx //
+#endif /* RT30xx // */
#ifdef RT3090
|| (pAd->bPCIclkOff == TRUE)
-#endif // RT3090 //
+#endif /* RT3090 // */
)
return;
{
- //if (pAd->StaCfg.Psm == PWR_SAVE)
- // return;
+ /*if (pAd->StaCfg.Psm == PWR_SAVE) */
+ /* return; */
{
if (pAd->StaCfg.Psm == PWR_SAVE)
return;
- // if the traffic is low, use average rssi as the criteria
+ /* if the traffic is low, use average rssi as the criteria */
if (pAd->Mlme.bLowThroughput == TRUE) {
rssi0 = pAd->StaCfg.RssiSample.LastRssi0;
rssi1 = pAd->StaCfg.RssiSample.LastRssi1;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
#ifdef RTMP_MAC_PCI
pAd->StaCfg.BBPR3 = BBPR3;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
}
}
pAd->CommonCfg.TriggerTimerCount++;
-// Driver should not send trigger frame, it should be send by application layer
+/* Driver should not send trigger frame, it should be send by application layer */
/*
if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable
&& (pAd->CommonCfg.bNeedSendTriggerFrame ||
BOOLEAN result = TRUE;
{
- // only associated STA counts
+ /* only associated STA counts */
if (pEntry && (pEntry->ValidAsCLI)
&& (pEntry->Sst == SST_ASSOC)) {
result = pAd->StaCfg.bAutoTxRateSwitch;
if (fixed_tx_mode == FIXED_TXMODE_CCK) {
TransmitSetting.field.MODE = MODE_CCK;
- // CCK mode allow MCS 0~3
+ /* CCK mode allow MCS 0~3 */
if (TransmitSetting.field.MCS > MCS_3)
TransmitSetting.field.MCS = MCS_3;
} else {
TransmitSetting.field.MODE = MODE_OFDM;
- // OFDM mode allow MCS 0~7
+ /* OFDM mode allow MCS 0~7 */
if (TransmitSetting.field.MCS > MCS_7)
TransmitSetting.field.MCS = MCS_7;
}
*/
VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd)
{
- UCHAR OrigR66Value = 0, R66; //, R66UpperBound = 0x30, R66LowerBound = 0x30;
+ UCHAR OrigR66Value = 0, R66; /*, R66UpperBound = 0x30, R66LowerBound = 0x30; */
CHAR Rssi;
- // 2860C did not support Fase CCA, therefore can't tune
+ /* 2860C did not support Fase CCA, therefore can't tune */
if (pAd->MACVersion == 0x28600100)
return;
- //
- // work as a STA
- //
- if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE) // no R66 tuning when SCANNING
+ /* */
+ /* work as a STA */
+ /* */
+ if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE) /* no R66 tuning when SCANNING */
return;
if ((pAd->OpMode == OPMODE_STA)
&& !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
#ifdef RTMP_MAC_PCI
&& (pAd->bPCIclkOff == FALSE)
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
) {
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value);
R66 = OrigR66Value;
else
Rssi = pAd->StaCfg.RssiSample.AvgRssi0;
- if (pAd->LatchRfRegs.Channel <= 14) { //BG band
+ if (pAd->LatchRfRegs.Channel <= 14) { /*BG band */
#ifdef RT30xx
- // RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
- // Otherwise, it will have some throughput side effect when low RSSI
+ /* RT3070 is a no LNA solution, it should have different control regarding to AGC gain control */
+ /* Otherwise, it will have some throughput side effect when low RSSI */
if (IS_RT3070(pAd) || IS_RT3090(pAd) || IS_RT3572(pAd)
|| IS_RT3390(pAd)) {
}
}
} else
-#endif // RT30xx //
+#endif /* RT30xx // */
{
if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) {
R66 = (0x2E + GET_LNA_GAIN(pAd)) + 0x10;
}
}
}
- } else { //A band
+ } else { /*A band */
if (pAd->CommonCfg.BBPCurrentBW == BW_20) {
if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) {
R66 =
{
UCHAR R66 = 0x30;
- if (pAd->LatchRfRegs.Channel <= 14) { // BG band
+ if (pAd->LatchRfRegs.Channel <= 14) { /* BG band */
#ifdef RT30xx
/* Gary was verified Amazon AP and find that RT307x has BBP_R66 invalid default value */
R66 = 0x1C + 2 * GET_LNA_GAIN(pAd);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
} else
-#endif // RT30xx //
+#endif /* RT30xx // */
{
R66 = 0x2E + GET_LNA_GAIN(pAd);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
}
- } else { //A band
+ } else { /*A band */
{
if (BandWidth == BW_20) {
R66 =
INT CH_HZ_ID_MAP_NUM = (sizeof(CH_HZ_ID_MAP) / sizeof(CH_FREQ_MAP));
CH_REGION ChRegion[] = {
- { // Antigua and Berbuda
+ { /* Antigua and Berbuda */
"AG",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Argentina
+ { /* Argentina */
"AR",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 4, 30, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Aruba
+ { /* Aruba */
"AW",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Australia
+ { /* Australia */
"AU",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 5, 30, BOTH, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Austria
+ { /* Austria */
"AT",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, TRUE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Bahamas
+ { /* Bahamas */
"BS",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 5, 30, BOTH, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Barbados
+ { /* Barbados */
"BB",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Bermuda
+ { /* Bermuda */
"BM",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Brazil
+ { /* Brazil */
"BR",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 24, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{149, 5, 30, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Belgium
+ { /* Belgium */
"BE",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 18, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 18, IDOR, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Bulgaria
+ { /* Bulgaria */
"BG",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, ODOR, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Canada
+ { /* Canada */
"CA",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 5, 30, BOTH, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Cayman IsLands
+ { /* Cayman IsLands */
"KY",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Chile
+ { /* Chile */
"CL",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 20, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 20, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 5, 20, BOTH, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // China
+ { /* China */
"CN",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{149, 4, 27, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Colombia
+ { /* Colombia */
"CO",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 17, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{149, 5, 30, BOTH, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Costa Rica
+ { /* Costa Rica */
"CR",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 17, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 4, 30, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Cyprus
+ { /* Cyprus */
"CY",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Czech_Republic
+ { /* Czech_Republic */
"CZ",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Denmark
+ { /* Denmark */
"DK",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Dominican Republic
+ { /* Dominican Republic */
"DO",
CE,
{
{1, 0, 20, BOTH, FALSE}
- , // 2.4 G, ch 0
+ , /* 2.4 G, ch 0 */
{149, 4, 20, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Equador
+ { /* Equador */
"EC",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{100, 11, 27, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // El Salvador
+ { /* El Salvador */
"SV",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 30, BOTH, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 4, 36, BOTH, TRUE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Finland
+ { /* Finland */
"FI",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // France
+ { /* France */
"FR",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Germany
+ { /* Germany */
"DE",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Greece
+ { /* Greece */
"GR",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, ODOR, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Guam
+ { /* Guam */
"GU",
CE,
{
{1, 11, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~11
+ , /* 2.4 G, ch 1~11 */
{36, 4, 17, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{149, 5, 30, BOTH, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Guatemala
+ { /* Guatemala */
"GT",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 17, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 4, 30, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Haiti
+ { /* Haiti */
"HT",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 17, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 4, 30, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Honduras
+ { /* Honduras */
"HN",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{149, 4, 27, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Hong Kong
+ { /* Hong Kong */
"HK",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 4, 30, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Hungary
+ { /* Hungary */
"HU",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Iceland
+ { /* Iceland */
"IS",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // India
+ { /* India */
"IN",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{149, 4, 24, IDOR, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Indonesia
+ { /* Indonesia */
"ID",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{149, 4, 27, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Ireland
+ { /* Ireland */
"IE",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, ODOR, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Israel
+ { /* Israel */
"IL",
CE,
{
{1, 3, 20, IDOR, FALSE}
- , // 2.4 G, ch 1~3
+ , /* 2.4 G, ch 1~3 */
{4, 6, 20, BOTH, FALSE}
- , // 2.4 G, ch 4~9
+ , /* 2.4 G, ch 4~9 */
{10, 4, 20, IDOR, FALSE}
- , // 2.4 G, ch 10~13
+ , /* 2.4 G, ch 10~13 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Italy
+ { /* Italy */
"IT",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, ODOR, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Japan
+ { /* Japan */
"JP",
JAP,
{
{1, 14, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~14
+ , /* 2.4 G, ch 1~14 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Jordan
+ { /* Jordan */
"JO",
CE,
{
{1, 13, 20, IDOR, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{149, 4, 23, IDOR, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Latvia
+ { /* Latvia */
"LV",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Liechtenstein
+ { /* Liechtenstein */
"LI",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Lithuania
+ { /* Lithuania */
"LT",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Luxemburg
+ { /* Luxemburg */
"LU",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Malaysia
+ { /* Malaysia */
"MY",
CE,
{
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 5, 20, BOTH, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Malta
+ { /* Malta */
"MT",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Marocco
+ { /* Marocco */
"MA",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 24, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Mexico
+ { /* Mexico */
"MX",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 5, 30, IDOR, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Netherlands
+ { /* Netherlands */
"NL",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // New Zealand
+ { /* New Zealand */
"NZ",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 24, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 4, 30, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Norway
+ { /* Norway */
"NO",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 24, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 24, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Peru
+ { /* Peru */
"PE",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{149, 4, 27, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Portugal
+ { /* Portugal */
"PT",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Poland
+ { /* Poland */
"PL",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Romania
+ { /* Romania */
"RO",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Russia
+ { /* Russia */
"RU",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{149, 4, 20, IDOR, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Saudi Arabia
+ { /* Saudi Arabia */
"SA",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 4, 23, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Serbia_and_Montenegro
+ { /* Serbia_and_Montenegro */
"CS",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Singapore
+ { /* Singapore */
"SG",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{149, 4, 20, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Slovakia
+ { /* Slovakia */
"SK",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Slovenia
+ { /* Slovenia */
"SI",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{0}
- , // end
+ , /* end */
}
}
,
- { // South Africa
+ { /* South Africa */
"ZA",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{149, 4, 30, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // South Korea
+ { /* South Korea */
"KR",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 20, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 20, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 8, 20, BOTH, FALSE}
- , // 5G, ch 100~128
+ , /* 5G, ch 100~128 */
{149, 4, 20, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Spain
+ { /* Spain */
"ES",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 17, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Sweden
+ { /* Sweden */
"SE",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Switzerland
+ { /* Switzerland */
"CH",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~13
+ , /* 2.4 G, ch 1~13 */
{36, 4, 23, IDOR, TRUE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Taiwan
+ { /* Taiwan */
"TW",
CE,
{
{1, 11, 30, BOTH, FALSE}
- , // 2.4 G, ch 1~11
+ , /* 2.4 G, ch 1~11 */
{52, 4, 23, IDOR, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Turkey
+ { /* Turkey */
"TR",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~11
+ , /* 2.4 G, ch 1~11 */
{36, 4, 23, BOTH, FALSE}
- , // 5G, ch 36~48
+ , /* 5G, ch 36~48 */
{52, 4, 23, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{0}
- , // end
+ , /* end */
}
}
,
- { // UK
+ { /* UK */
"GB",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~11
+ , /* 2.4 G, ch 1~11 */
{36, 4, 23, IDOR, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{52, 4, 23, IDOR, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Ukraine
+ { /* Ukraine */
"UA",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~11
+ , /* 2.4 G, ch 1~11 */
{0}
- , // end
+ , /* end */
}
}
,
- { // United_Arab_Emirates
+ { /* United_Arab_Emirates */
"AE",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~11
+ , /* 2.4 G, ch 1~11 */
{0}
- , // end
+ , /* end */
}
}
,
- { // United_States
+ { /* United_States */
"US",
CE,
{
{1, 11, 30, BOTH, FALSE}
- , // 2.4 G, ch 1~11
+ , /* 2.4 G, ch 1~11 */
{36, 4, 17, IDOR, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{52, 4, 24, BOTH, TRUE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 30, BOTH, TRUE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{149, 5, 30, BOTH, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Venezuela
+ { /* Venezuela */
"VE",
CE,
{
{1, 13, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~11
+ , /* 2.4 G, ch 1~11 */
{149, 4, 27, BOTH, FALSE}
- , // 5G, ch 149~161
+ , /* 5G, ch 149~161 */
{0}
- , // end
+ , /* end */
}
}
,
- { // Default
+ { /* Default */
"",
CE,
{
{1, 11, 20, BOTH, FALSE}
- , // 2.4 G, ch 1~11
+ , /* 2.4 G, ch 1~11 */
{36, 4, 20, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{52, 4, 20, BOTH, FALSE}
- , // 5G, ch 52~64
+ , /* 5G, ch 52~64 */
{100, 11, 20, BOTH, FALSE}
- , // 5G, ch 100~140
+ , /* 5G, ch 100~140 */
{149, 5, 20, BOTH, FALSE}
- , // 5G, ch 149~165
+ , /* 5G, ch 149~165 */
{0}
- , // end
+ , /* end */
}
}
,
VOID N_ChannelCheck(IN PRTMP_ADAPTER pAd)
{
- //UCHAR ChannelNum = pAd->ChannelListNum;
+ /*UCHAR ChannelNum = pAd->ChannelListNum; */
UCHAR Channel = pAd->CommonCfg.Channel;
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
if (Channel == 14) {
pAd->CommonCfg.RegTransmitSetting.field.BW =
BW_20;
- //pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_NONE; // We didn't set the ExtCh as NONE due to it'll set in RTMPSetHT()
+ /*pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_NONE; // We didn't set the ExtCh as NONE due to it'll set in RTMPSetHT() */
}
}
}
RT30xxReverseRFSleepModeSetup;
}
}
-#endif // RT3070 //
+#endif /* RT3070 // */
#ifdef RT3090
if (IS_RT3090(pAd) && (pAd->infType == RTMP_DEV_INF_PCI)) {
pChipOps->AsicRfTurnOff = RT30xxLoadRFSleepModeSetup;
pChipOps->AsicReverseRfFromSleepMode =
RT30xxReverseRFSleepModeSetup;
}
-#endif // RT3090 //
+#endif /* RT3090 // */
}
-#endif // RT30xx //
+#endif /* RT30xx // */
}
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
char *CipherName[] =
{ "none", "wep64", "wep128", "TKIP", "AES", "CKIP64", "CKIP128" };
-//
-// BBP register initialization set
-//
+/* */
+/* BBP register initialization set */
+/* */
REG_PAIR BBPRegTable[] = {
- {BBP_R65, 0x2C}, // fix rssi issue
- {BBP_R66, 0x38}, // Also set this default value to pAd->BbpTuning.R66CurrentValue at initial
+ {BBP_R65, 0x2C}, /* fix rssi issue */
+ {BBP_R66, 0x38}, /* Also set this default value to pAd->BbpTuning.R66CurrentValue at initial */
{BBP_R69, 0x12},
- {BBP_R70, 0xa}, // BBP_R70 will change to 0x8 in ApStartUp and LinkUp for rt2860C, otherwise value is 0xa
+ {BBP_R70, 0xa}, /* BBP_R70 will change to 0x8 in ApStartUp and LinkUp for rt2860C, otherwise value is 0xa */
{BBP_R73, 0x10},
{BBP_R81, 0x37},
{BBP_R82, 0x62},
{BBP_R83, 0x6A},
- {BBP_R84, 0x99}, // 0x19 is for rt2860E and after. This is for extension channel overlapping IOT. 0x99 is for rt2860D and before
- {BBP_R86, 0x00}, // middle range issue, Rory @2008-01-28
- {BBP_R91, 0x04}, // middle range issue, Rory @2008-01-28
- {BBP_R92, 0x00}, // middle range issue, Rory @2008-01-28
- {BBP_R103, 0x00}, // near range high-power issue, requested from Gary @2008-0528
- {BBP_R105, 0x05}, // 0x05 is for rt2860E to turn on FEQ control. It is safe for rt2860D and before, because Bit 7:2 are reserved in rt2860D and before.
- {BBP_R106, 0x35}, // for ShortGI throughput
+ {BBP_R84, 0x99}, /* 0x19 is for rt2860E and after. This is for extension channel overlapping IOT. 0x99 is for rt2860D and before */
+ {BBP_R86, 0x00}, /* middle range issue, Rory @2008-01-28 */
+ {BBP_R91, 0x04}, /* middle range issue, Rory @2008-01-28 */
+ {BBP_R92, 0x00}, /* middle range issue, Rory @2008-01-28 */
+ {BBP_R103, 0x00}, /* near range high-power issue, requested from Gary @2008-0528 */
+ {BBP_R105, 0x05}, /* 0x05 is for rt2860E to turn on FEQ control. It is safe for rt2860D and before, because Bit 7:2 are reserved in rt2860D and before. */
+ {BBP_R106, 0x35}, /* for ShortGI throughput */
};
#define NUM_BBP_REG_PARMS (sizeof(BBPRegTable) / sizeof(REG_PAIR))
-//
-// ASIC register initialization sets
-//
+/* */
+/* ASIC register initialization sets */
+/* */
RTMP_REG_PAIR MACRegTable[] = {
#if defined(HW_BEACON_OFFSET) && (HW_BEACON_OFFSET == 0x200)
{BCN_OFFSET1, 0xfcf8f4f0}, /* 0x3800, 0x3A00, 0x3C00, 0x3E00, 512B for each beacon */
#else
#error You must re-calculate new value for BCN_OFFSET0 & BCN_OFFSET1 in MACRegTable[]!!!
-#endif // HW_BEACON_OFFSET //
-
- {LEGACY_BASIC_RATE, 0x0000013f}, // Basic rate set bitmap
- {HT_BASIC_RATE, 0x00008003}, // Basic HT rate set , 20M, MCS=3, MM. Format is the same as in TXWI.
- {MAC_SYS_CTRL, 0x00}, // 0x1004, , default Disable RX
- {RX_FILTR_CFG, 0x17f97}, //0x1400 , RX filter control,
- {BKOFF_SLOT_CFG, 0x209}, // default set short slot time, CC_DELAY_TIME should be 2
- //{TX_SW_CFG0, 0x40a06}, // Gary,2006-08-23
- {TX_SW_CFG0, 0x0}, // Gary,2008-05-21 for CWC test
- {TX_SW_CFG1, 0x80606}, // Gary,2006-08-23
- {TX_LINK_CFG, 0x1020}, // Gary,2006-08-23
- //{TX_TIMEOUT_CFG, 0x00182090}, // CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT
- {TX_TIMEOUT_CFG, 0x000a2090}, // CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT , Modify for 2860E ,2007-08-01
- {MAX_LEN_CFG, MAX_AGGREGATION_SIZE | 0x00001000}, // 0x3018, MAX frame length. Max PSDU = 16kbytes.
- {LED_CFG, 0x7f031e46}, // Gary, 2006-08-23
-
- {PBF_MAX_PCNT, 0x1F3FBF9F}, //0x1F3f7f9f}, //Jan, 2006/04/20
-
- {TX_RTY_CFG, 0x47d01f0f}, // Jan, 2006/11/16, Set TxWI->ACK =0 in Probe Rsp Modify for 2860E ,2007-08-03
-
- {AUTO_RSP_CFG, 0x00000013}, // Initial Auto_Responder, because QA will turn off Auto-Responder
- {CCK_PROT_CFG, 0x05740003 /*0x01740003 */ }, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
- {OFDM_PROT_CFG, 0x05740003 /*0x01740003 */ }, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
+#endif /* HW_BEACON_OFFSET // */
+
+ {LEGACY_BASIC_RATE, 0x0000013f}, /* Basic rate set bitmap */
+ {HT_BASIC_RATE, 0x00008003}, /* Basic HT rate set , 20M, MCS=3, MM. Format is the same as in TXWI. */
+ {MAC_SYS_CTRL, 0x00}, /* 0x1004, , default Disable RX */
+ {RX_FILTR_CFG, 0x17f97}, /*0x1400 , RX filter control, */
+ {BKOFF_SLOT_CFG, 0x209}, /* default set short slot time, CC_DELAY_TIME should be 2 */
+ /*{TX_SW_CFG0, 0x40a06}, // Gary,2006-08-23 */
+ {TX_SW_CFG0, 0x0}, /* Gary,2008-05-21 for CWC test */
+ {TX_SW_CFG1, 0x80606}, /* Gary,2006-08-23 */
+ {TX_LINK_CFG, 0x1020}, /* Gary,2006-08-23 */
+ /*{TX_TIMEOUT_CFG, 0x00182090}, // CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT */
+ {TX_TIMEOUT_CFG, 0x000a2090}, /* CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT , Modify for 2860E ,2007-08-01 */
+ {MAX_LEN_CFG, MAX_AGGREGATION_SIZE | 0x00001000}, /* 0x3018, MAX frame length. Max PSDU = 16kbytes. */
+ {LED_CFG, 0x7f031e46}, /* Gary, 2006-08-23 */
+
+ {PBF_MAX_PCNT, 0x1F3FBF9F}, /*0x1F3f7f9f}, //Jan, 2006/04/20 */
+
+ {TX_RTY_CFG, 0x47d01f0f}, /* Jan, 2006/11/16, Set TxWI->ACK =0 in Probe Rsp Modify for 2860E ,2007-08-03 */
+
+ {AUTO_RSP_CFG, 0x00000013}, /* Initial Auto_Responder, because QA will turn off Auto-Responder */
+ {CCK_PROT_CFG, 0x05740003 /*0x01740003 */ }, /* Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. */
+ {OFDM_PROT_CFG, 0x05740003 /*0x01740003 */ }, /* Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. */
#ifdef RTMP_MAC_USB
- {PBF_CFG, 0xf40006}, // Only enable Queue 2
- {MM40_PROT_CFG, 0x3F44084}, // Initial Auto_Responder, because QA will turn off Auto-Responder
+ {PBF_CFG, 0xf40006}, /* Only enable Queue 2 */
+ {MM40_PROT_CFG, 0x3F44084}, /* Initial Auto_Responder, because QA will turn off Auto-Responder */
{WPDMA_GLO_CFG, 0x00000030},
-#endif // RTMP_MAC_USB //
- {GF20_PROT_CFG, 0x01744004}, // set 19:18 --> Short NAV for MIMO PS
+#endif /* RTMP_MAC_USB // */
+ {GF20_PROT_CFG, 0x01744004}, /* set 19:18 --> Short NAV for MIMO PS */
{GF40_PROT_CFG, 0x03F44084},
{MM20_PROT_CFG, 0x01744004},
#ifdef RTMP_MAC_PCI
{MM40_PROT_CFG, 0x03F54084},
-#endif // RTMP_MAC_PCI //
- {TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f *//*0x000024bf */ }, //Extension channel backoff.
+#endif /* RTMP_MAC_PCI // */
+ {TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f *//*0x000024bf */ }, /*Extension channel backoff. */
{TX_RTS_CFG, 0x00092b20},
- {EXP_ACK_TIME, 0x002400ca}, // default value
+ {EXP_ACK_TIME, 0x002400ca}, /* default value */
{TXOP_HLDR_ET, 0x00000002},
and beacon1 is SIFS (10us), so if INTEL 2200bg card connects to BSS0, the ping
will always lost. So we change the SIFS of CCK from 10us to 16us. */
{XIFS_TIME_CFG, 0x33a41010},
- {PWR_PIN_CFG, 0x00000003}, // patch for 2880-E
+ {PWR_PIN_CFG, 0x00000003}, /* patch for 2880-E */
};
RTMP_REG_PAIR STAMACRegTable[] = {
*ppAdapter = NULL;
do {
- // Allocate RTMP_ADAPTER memory block
+ /* Allocate RTMP_ADAPTER memory block */
pBeaconBuf = kmalloc(MAX_BEACON_SIZE, MEM_ALLOC_FLAG);
if (pBeaconBuf == NULL) {
Status = NDIS_STATUS_FAILURE;
("\n\n=== pAd = %p, size = %d ===\n\n", pAd,
(UINT32) sizeof(RTMP_ADAPTER)));
- // Init spin locks
+ /* Init spin locks */
NdisAllocateSpinLock(&pAd->MgmtRingLock);
#ifdef RTMP_MAC_PCI
NdisAllocateSpinLock(&pAd->RxRingLock);
#ifdef RT3090
NdisAllocateSpinLock(&pAd->McuCmdLock);
-#endif // RT3090 //
-#endif // RTMP_MAC_PCI //
+#endif /* RT3090 // */
+#endif /* RTMP_MAC_PCI // */
for (index = 0; index < NUM_OF_TX_RING; index++) {
NdisAllocateSpinLock(&pAd->TxSwQueueLock[index]);
UCHAR t1, t2, t3, t4;
BOOLEAN bApwrdeltaMinus = TRUE, bGpwrdeltaMinus = TRUE;
- //
- // Get power delta for 20MHz and 40MHz.
- //
+ /* */
+ /* Get power delta for 20MHz and 40MHz. */
+ /* */
DBGPRINT(RT_DEBUG_TRACE, ("Txpower per Rate\n"));
RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_DELTA, value2);
Apwrdelta = 0;
DBGPRINT(RT_DEBUG_TRACE,
("Gpwrdelta = %x, Apwrdelta = %x .\n", Gpwrdelta, Apwrdelta));
- //
- // Get Txpower per MCS for 20MHz in 2.4G.
- //
+ /* */
+ /* Get Txpower per MCS for 20MHz in 2.4G. */
+ /* */
for (i = 0; i < 5; i++) {
RT28xx_EEPROM_READ16(pAd,
EEPROM_TXPOWER_BYRATE_20MHZ_2_4G + i * 4,
EEPROM_TX_PWR_STRUC Power;
EEPROM_TX_PWR_STRUC Power2;
- // Read Tx power value for all channels
- // Value from 1 - 0x7f. Default value is 24.
- // Power value : 2.4G 0x00 (0) ~ 0x1F (31)
- // : 5.5G 0xF9 (-7) ~ 0x0F (15)
+ /* Read Tx power value for all channels */
+ /* Value from 1 - 0x7f. Default value is 24. */
+ /* Power value : 2.4G 0x00 (0) ~ 0x1F (31) */
+ /* : 5.5G 0xF9 (-7) ~ 0x0F (15) */
- // 0. 11b/g, ch1 - ch 14
+ /* 0. 11b/g, ch1 - ch 14 */
for (i = 0; i < 7; i++) {
RT28xx_EEPROM_READ16(pAd, EEPROM_G_TX_PWR_OFFSET + i * 2,
Power.word);
pAd->TxPower[i * 2 + 1].Power2 = Power2.field.Byte1;
}
- // 1. U-NII lower/middle band: 36, 38, 40; 44, 46, 48; 52, 54, 56; 60, 62, 64 (including central frequency in BW 40MHz)
- // 1.1 Fill up channel
+ /* 1. U-NII lower/middle band: 36, 38, 40; 44, 46, 48; 52, 54, 56; 60, 62, 64 (including central frequency in BW 40MHz) */
+ /* 1.1 Fill up channel */
choffset = 14;
for (i = 0; i < 4; i++) {
pAd->TxPower[3 * i + choffset + 0].Channel = 36 + i * 8 + 0;
pAd->TxPower[3 * i + choffset + 2].Power2 = DEFAULT_RF_TX_POWER;
}
- // 1.2 Fill up power
+ /* 1.2 Fill up power */
for (i = 0; i < 6; i++) {
RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + i * 2,
Power.word);
Power2.field.Byte1;
}
- // 2. HipperLAN 2 100, 102 ,104; 108, 110, 112; 116, 118, 120; 124, 126, 128; 132, 134, 136; 140 (including central frequency in BW 40MHz)
- // 2.1 Fill up channel
+ /* 2. HipperLAN 2 100, 102 ,104; 108, 110, 112; 116, 118, 120; 124, 126, 128; 132, 134, 136; 140 (including central frequency in BW 40MHz) */
+ /* 2.1 Fill up channel */
choffset = 14 + 12;
for (i = 0; i < 5; i++) {
pAd->TxPower[3 * i + choffset + 0].Channel = 100 + i * 8 + 0;
pAd->TxPower[3 * 5 + choffset + 0].Power = DEFAULT_RF_TX_POWER;
pAd->TxPower[3 * 5 + choffset + 0].Power2 = DEFAULT_RF_TX_POWER;
- // 2.2 Fill up power
+ /* 2.2 Fill up power */
for (i = 0; i < 8; i++) {
RT28xx_EEPROM_READ16(pAd,
EEPROM_A_TX_PWR_OFFSET + (choffset - 14) +
Power2.field.Byte1;
}
- // 3. U-NII upper band: 149, 151, 153; 157, 159, 161; 165, 167, 169; 171, 173 (including central frequency in BW 40MHz)
- // 3.1 Fill up channel
+ /* 3. U-NII upper band: 149, 151, 153; 157, 159, 161; 165, 167, 169; 171, 173 (including central frequency in BW 40MHz) */
+ /* 3.1 Fill up channel */
choffset = 14 + 12 + 16;
/*for (i = 0; i < 2; i++) */
for (i = 0; i < 3; i++) {
pAd->TxPower[3 * 3 + choffset + 1].Power = DEFAULT_RF_TX_POWER;
pAd->TxPower[3 * 3 + choffset + 1].Power2 = DEFAULT_RF_TX_POWER;
- // 3.2 Fill up power
+ /* 3.2 Fill up power */
/*for (i = 0; i < 4; i++) */
for (i = 0; i < 6; i++) {
RT28xx_EEPROM_READ16(pAd,
Power2.field.Byte1;
}
- // 4. Print and Debug
+ /* 4. Print and Debug */
/*choffset = 14 + 12 + 16 + 7; */
choffset = 14 + 12 + 16 + 11;
if (pAd->chipOps.eeinit)
pAd->chipOps.eeinit(pAd);
- // Init EEPROM Address Number, before access EEPROM; if 93c46, EEPROMAddressNum=6, else if 93c66, EEPROMAddressNum=8
+ /* Init EEPROM Address Number, before access EEPROM; if 93c46, EEPROMAddressNum=6, else if 93c66, EEPROMAddressNum=8 */
RTMP_IO_READ32(pAd, E2PROM_CSR, &data);
DBGPRINT(RT_DEBUG_TRACE, ("--> E2PROM_CSR = 0x%x\n", data));
if ((data & 0x30) == 0)
- pAd->EEPROMAddressNum = 6; // 93C46
+ pAd->EEPROMAddressNum = 6; /* 93C46 */
else if ((data & 0x30) == 0x10)
- pAd->EEPROMAddressNum = 8; // 93C66
+ pAd->EEPROMAddressNum = 8; /* 93C66 */
else
- pAd->EEPROMAddressNum = 8; // 93C86
+ pAd->EEPROMAddressNum = 8; /* 93C86 */
DBGPRINT(RT_DEBUG_TRACE,
("--> EEPROMAddressNum = %d\n", pAd->EEPROMAddressNum));
- // RT2860 MAC no longer auto load MAC address from E2PROM. Driver has to intialize
- // MAC address registers according to E2PROM setting
+ /* RT2860 MAC no longer auto load MAC address from E2PROM. Driver has to intialize */
+ /* MAC address registers according to E2PROM setting */
if (mac_addr == NULL ||
strlen((PSTRING) mac_addr) != 17 ||
mac_addr[2] != ':' || mac_addr[5] != ':' || mac_addr[8] != ':' ||
}
{
- //more conveninet to test mbssid, so ap's bssid &0xf1
+ /*more conveninet to test mbssid, so ap's bssid &0xf1 */
if (pAd->PermanentAddress[0] == 0xff)
pAd->PermanentAddress[0] = RandomByte(pAd) & 0xf8;
- //if (pAd->PermanentAddress[5] == 0xff)
- // pAd->PermanentAddress[5] = RandomByte(pAd)&0xf8;
+ /*if (pAd->PermanentAddress[5] == 0xff) */
+ /* pAd->PermanentAddress[5] = RandomByte(pAd)&0xf8; */
DBGPRINT_RAW(RT_DEBUG_TRACE,
("E2PROM MAC: =%02x:%02x:%02x:%02x:%02x:%02x\n",
}
}
- // if not return early. cause fail at emulation.
- // Init the channel number for TX channel power
+ /* if not return early. cause fail at emulation. */
+ /* Init the channel number for TX channel power */
RTMPReadChannelPwr(pAd);
- // if E2PROM version mismatch with driver's expectation, then skip
- // all subsequent E2RPOM retieval and set a system error bit to notify GUI
+ /* if E2PROM version mismatch with driver's expectation, then skip */
+ /* all subsequent E2RPOM retieval and set a system error bit to notify GUI */
RT28xx_EEPROM_READ16(pAd, EEPROM_VERSION_OFFSET, Version.word);
pAd->EepromVersion =
Version.field.Version + Version.field.FaeReleaseNumber * 256;
pAd->EEPROMDefaultValue[i] = 0xffff;
return; */
}
- // Read BBP default value from EEPROM and store to array(EEPROMDefaultValue) in pAd
+ /* Read BBP default value from EEPROM and store to array(EEPROMDefaultValue) in pAd */
RT28xx_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET, value);
pAd->EEPROMDefaultValue[0] = value;
RT28xx_EEPROM_READ16(pAd, EEPROM_NIC2_OFFSET, value);
pAd->EEPROMDefaultValue[1] = value;
- RT28xx_EEPROM_READ16(pAd, 0x38, value); // Country Region
+ RT28xx_EEPROM_READ16(pAd, 0x38, value); /* Country Region */
pAd->EEPROMDefaultValue[2] = value;
for (i = 0; i < 8; i++) {
pAd->EEPROMDefaultValue[i + 3] = value;
}
- // We have to parse NIC configuration 0 at here.
- // If TSSI did not have preloaded value, it should reset the TxAutoAgc to false
- // Therefore, we have to read TxAutoAgc control beforehand.
- // Read Tx AGC control bit
+ /* We have to parse NIC configuration 0 at here. */
+ /* If TSSI did not have preloaded value, it should reset the TxAutoAgc to false */
+ /* Therefore, we have to read TxAutoAgc control beforehand. */
+ /* Read Tx AGC control bit */
Antenna.word = pAd->EEPROMDefaultValue[0];
if (Antenna.word == 0xFFFF) {
#ifdef RT30xx
Antenna.field.TxPath = 1;
Antenna.field.RxPath = 1;
} else
-#endif // RT30xx //
+#endif /* RT30xx // */
{
Antenna.word = 0;
Antenna.word));
}
}
- // Choose the desired Tx&Rx stream.
+ /* Choose the desired Tx&Rx stream. */
if ((pAd->CommonCfg.TxStream == 0)
|| (pAd->CommonCfg.TxStream > Antenna.field.TxPath))
pAd->CommonCfg.TxStream = Antenna.field.TxPath;
if ((pAd->MACVersion < RALINK_2883_VERSION) &&
(pAd->CommonCfg.RxStream > 2)) {
- // only 2 Rx streams for RT2860 series
+ /* only 2 Rx streams for RT2860 series */
pAd->CommonCfg.RxStream = 2;
}
}
- // 3*3
- // read value from EEPROM and set them to CSR174 ~ 177 in chain0 ~ chain2
- // yet implement
+ /* 3*3 */
+ /* read value from EEPROM and set them to CSR174 ~ 177 in chain0 ~ chain2 */
+ /* yet implement */
for (i = 0; i < 3; i++) {
}
("NICReadEEPROMParameters: RxPath = %d, TxPath = %d\n",
Antenna.field.RxPath, Antenna.field.TxPath));
- // Save the antenna for future use
+ /* Save the antenna for future use */
pAd->Antenna.word = Antenna.word;
- // Set the RfICType here, then we can initialize RFIC related operation callbacks
+ /* Set the RfICType here, then we can initialize RFIC related operation callbacks */
pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath;
pAd->RfIcType = (UCHAR) Antenna.field.RfIcType;
#ifdef RTMP_RF_RW_SUPPORT
RtmpChipOpsRFHook(pAd);
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
#ifdef RTMP_MAC_PCI
sprintf((PSTRING) pAd->nickname, "RT2860STA");
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- //
- // Reset PhyMode if we don't support 802.11a
- // Only RFIC_2850 & RFIC_2750 support 802.11a
- //
+ /* */
+ /* Reset PhyMode if we don't support 802.11a */
+ /* Only RFIC_2850 & RFIC_2750 support 802.11a */
+ /* */
if ((Antenna.field.RfIcType != RFIC_2850)
&& (Antenna.field.RfIcType != RFIC_2750)
&& (Antenna.field.RfIcType != RFIC_3052)) {
(pAd->CommonCfg.PhyMode == PHY_11N_5G))
pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED;
}
- // Read TSSI reference and TSSI boundary for temperature compensation. This is ugly
- // 0. 11b/g
+ /* Read TSSI reference and TSSI boundary for temperature compensation. This is ugly */
+ /* 0. 11b/g */
{
/* these are tempature reference value (0x00 ~ 0xFE)
ex: 0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
pAd->TssiMinusBoundaryG[0] = pAd->TssiRefG;
pAd->TssiPlusBoundaryG[0] = pAd->TssiRefG;
- // Disable TxAgc if the based value is not right
+ /* Disable TxAgc if the based value is not right */
if (pAd->TssiRefG == 0xff)
pAd->bAutoTxAgcG = FALSE;
pAd->TssiPlusBoundaryG[3], pAd->TssiPlusBoundaryG[4],
pAd->TxAgcStepG, pAd->bAutoTxAgcG));
}
- // 1. 11a
+ /* 1. 11a */
{
RT28xx_EEPROM_READ16(pAd, 0xD4, Power.word);
pAd->TssiMinusBoundaryA[4] = Power.field.Byte0;
pAd->TssiMinusBoundaryA[0] = pAd->TssiRefA;
pAd->TssiPlusBoundaryA[0] = pAd->TssiRefA;
- // Disable TxAgc if the based value is not right
+ /* Disable TxAgc if the based value is not right */
if (pAd->TssiRefA == 0xff)
pAd->bAutoTxAgcA = FALSE;
}
pAd->BbpRssiToDbmDelta = 0x0;
- // Read frequency offset setting for RF
+ /* Read frequency offset setting for RF */
RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, value);
if ((value & 0x00FF) != 0x00FF)
pAd->RfFreqOffset = (ULONG) (value & 0x00FF);
DBGPRINT(RT_DEBUG_TRACE,
("E2PROM: RF FreqOffset=0x%lx \n", pAd->RfFreqOffset));
- //CountryRegion byte offset (38h)
- value = pAd->EEPROMDefaultValue[2] >> 8; // 2.4G band
- value2 = pAd->EEPROMDefaultValue[2] & 0x00FF; // 5G band
+ /*CountryRegion byte offset (38h) */
+ value = pAd->EEPROMDefaultValue[2] >> 8; /* 2.4G band */
+ value2 = pAd->EEPROMDefaultValue[2] & 0x00FF; /* 5G band */
if ((value <= REGION_MAXIMUM_BG_BAND)
&& (value2 <= REGION_MAXIMUM_A_BAND)) {
RTMPSetPhyMode(pAd, TmpPhy);
SetCommonHT(pAd);
}
- //
- // Get RSSI Offset on EEPROM 0x9Ah & 0x9Ch.
- // The valid value are (-10 ~ 10)
- //
+ /* */
+ /* Get RSSI Offset on EEPROM 0x9Ah & 0x9Ch. */
+ /* The valid value are (-10 ~ 10) */
+ /* */
RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, value);
pAd->BGRssiOffset0 = value & 0x00ff;
pAd->BGRssiOffset1 = (value >> 8);
pAd->BLNAGain = value & 0x00ff;
pAd->ALNAGain0 = (value >> 8);
- // Validate 11b/g RSSI_0 offset.
+ /* Validate 11b/g RSSI_0 offset. */
if ((pAd->BGRssiOffset0 < -10) || (pAd->BGRssiOffset0 > 10))
pAd->BGRssiOffset0 = 0;
- // Validate 11b/g RSSI_1 offset.
+ /* Validate 11b/g RSSI_1 offset. */
if ((pAd->BGRssiOffset1 < -10) || (pAd->BGRssiOffset1 > 10))
pAd->BGRssiOffset1 = 0;
- // Validate 11b/g RSSI_2 offset.
+ /* Validate 11b/g RSSI_2 offset. */
if ((pAd->BGRssiOffset2 < -10) || (pAd->BGRssiOffset2 > 10))
pAd->BGRssiOffset2 = 0;
if (((UCHAR) pAd->ALNAGain2 == 0xFF) || (pAd->ALNAGain2 == 0x00))
pAd->ALNAGain2 = pAd->ALNAGain0;
- // Validate 11a RSSI_0 offset.
+ /* Validate 11a RSSI_0 offset. */
if ((pAd->ARssiOffset0 < -10) || (pAd->ARssiOffset0 > 10))
pAd->ARssiOffset0 = 0;
- // Validate 11a RSSI_1 offset.
+ /* Validate 11a RSSI_1 offset. */
if ((pAd->ARssiOffset1 < -10) || (pAd->ARssiOffset1 > 10))
pAd->ARssiOffset1 = 0;
- //Validate 11a RSSI_2 offset.
+ /*Validate 11a RSSI_2 offset. */
if ((pAd->ARssiOffset2 < -10) || (pAd->ARssiOffset2 > 10))
pAd->ARssiOffset2 = 0;
#ifdef RT30xx
- //
- // Get TX mixer gain setting
- // 0xff are invalid value
- // Note: RT30xX default value is 0x00 and will program to RF_R17 only when this value is not zero.
- // RT359X default value is 0x02
- //
+ /* */
+ /* Get TX mixer gain setting */
+ /* 0xff are invalid value */
+ /* Note: RT30xX default value is 0x00 and will program to RF_R17 only when this value is not zero. */
+ /* RT359X default value is 0x02 */
+ /* */
if (IS_RT30xx(pAd) || IS_RT3572(pAd)) {
RT28xx_EEPROM_READ16(pAd, EEPROM_TXMIXER_GAIN_2_4G, value);
pAd->TxMixerGain24G = 0;
pAd->TxMixerGain24G = (UCHAR) value;
}
}
-#endif // RT30xx //
+#endif /* RT30xx // */
- //
- // Get LED Setting.
- //
+ /* */
+ /* Get LED Setting. */
+ /* */
RT28xx_EEPROM_READ16(pAd, 0x3a, value);
pAd->LedCntl.word = (value >> 8);
RT28xx_EEPROM_READ16(pAd, EEPROM_LED1_OFFSET, value);
#ifdef RT30xx
#ifdef RTMP_EFUSE_SUPPORT
RtmpEfuseSupportCheck(pAd);
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
+#endif /* RTMP_EFUSE_SUPPORT // */
+#endif /* RT30xx // */
DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n"));
}
UINT32 data = 0;
UCHAR BBPR1 = 0;
USHORT i;
-// EEPROM_ANTENNA_STRUC Antenna;
+/* EEPROM_ANTENNA_STRUC Antenna; */
EEPROM_NIC_CONFIG2_STRUC NicConfig2;
UCHAR BBPR3 = 0;
}
}
- // Save the antenna for future use
+ /* Save the antenna for future use */
pAd->NicConfig2.word = NicConfig2.word;
#ifdef RT30xx
- // set default antenna as main
+ /* set default antenna as main */
if (pAd->RfIcType == RFIC_3020)
AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
-#endif // RT30xx //
+#endif /* RT30xx // */
- //
- // Send LED Setting to MCU.
- //
+ /* */
+ /* Send LED Setting to MCU. */
+ /* */
if (pAd->LedCntl.word == 0xFF) {
pAd->LedCntl.word = 0x01;
pAd->Led1 = 0x5555;
#ifdef RTMP_MAC_PCI
pAd->Led3 = 0xA9F8;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
pAd->Led3 = 0x5627;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
}
AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR) pAd->Led1,
AsicSendCommandToMcu(pAd, 0x51, 0xff, 0, pAd->LedCntl.field.Polarity);
pAd->LedIndicatorStrength = 0xFF;
- RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, before link up
+ RTMPSetSignalLED(pAd, -100); /* Force signal strength Led to be turned off, before link up */
{
- // Read Hardware controlled Radio state enable bit
+ /* Read Hardware controlled Radio state enable bit */
if (NicConfig2.field.HardwareRadioControl == 1) {
pAd->StaCfg.bHardwareRadio = TRUE;
- // Read GPIO pin2 as Hardware controlled radio state
+ /* Read GPIO pin2 as Hardware controlled radio state */
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data);
if ((data & 0x04) == 0) {
pAd->StaCfg.bHwRadio = FALSE;
pAd->StaCfg.bRadio = FALSE;
-// RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818);
+/* RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818); */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
}
} else
AsicSendCommandToMcu(pAd, 0x30, PowerRadioOffCID, 0xff,
0x02);
AsicCheckCommanOk(pAd, PowerRadioOffCID);
-#endif // RT3090 //
+#endif /* RT3090 // */
#ifndef RT3090
AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
-#endif // RT3090 //
+#endif /* RT3090 // */
AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00,
0x00);
- // 2-1. wait command ok.
+ /* 2-1. wait command ok. */
AsicCheckCommanOk(pAd, PowerWakeCID);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
}
}
if (pChipOps->AsicReverseRfFromSleepMode)
pChipOps->AsicReverseRfFromSleepMode(pAd);
}
- // 3090 MCU Wakeup command needs more time to be stable.
- // Before stable, don't issue other MCU command to prevent from firmware error.
+ /* 3090 MCU Wakeup command needs more time to be stable. */
+ /* Before stable, don't issue other MCU command to prevent from firmware error. */
if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
&& IS_VERSION_AFTER_F(pAd)
pAd->brt30xxBanMcuCmd = FALSE;
RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
}
-#endif // RT30xx //
-#endif // RTMP_MAC_PCI //
+#endif /* RT30xx // */
+#endif /* RTMP_MAC_PCI // */
- // Turn off patching for cardbus controller
+ /* Turn off patching for cardbus controller */
if (NicConfig2.field.CardbusAcceleration == 1) {
-// pAd->bTest1 = TRUE;
+/* pAd->bTest1 = TRUE; */
}
if (NicConfig2.field.DynamicTxAgcControl == 1)
pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
else
pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = FALSE;
- //
- // Since BBP has been progamed, to make sure BBP setting will be
- // upate inside of AsicAntennaSelect, so reset to UNKNOWN_BAND!!
- //
+ /* */
+ /* Since BBP has been progamed, to make sure BBP setting will be */
+ /* upate inside of AsicAntennaSelect, so reset to UNKNOWN_BAND!! */
+ /* */
pAd->CommonCfg.BandState = UNKNOWN_BAND;
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
{
- // Handle the difference when 1T
+ /* Handle the difference when 1T */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
if (pAd->Antenna.field.TxPath == 1) {
BBPR1 &= (~0x18);
#ifdef RTMP_MAC_USB
#ifdef RT30xx
- // update registers from EEPROM for RT3071 or later(3572/3592).
+ /* update registers from EEPROM for RT3071 or later(3572/3592). */
if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) {
UCHAR RegIdx, RegValue;
USHORT value;
- // after RT3071, write BBP from EEPROM 0xF0 to 0x102
+ /* after RT3071, write BBP from EEPROM 0xF0 to 0x102 */
for (i = 0xF0; i <= 0x102; i = i + 2) {
value = 0xFFFF;
RT28xx_EEPROM_READ16(pAd, i, value);
}
}
- // after RT3071, write RF from EEPROM 0x104 to 0x116
+ /* after RT3071, write RF from EEPROM 0x104 to 0x116 */
for (i = 0x104; i <= 0x116; i = i + 2) {
value = 0xFFFF;
RT28xx_EEPROM_READ16(pAd, i, value);
}
}
}
-#endif // RT30xx //
-#endif // RTMP_MAC_USB //
+#endif /* RT30xx // */
+#endif /* RTMP_MAC_USB // */
DBGPRINT(RT_DEBUG_TRACE,
("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n",
#ifdef RTMP_MAC_PCI
UINT32 Value;
DELAY_INT_CFG_STRUC IntCfg;
-#endif // RTMP_MAC_PCI //
-// INT_MASK_CSR_STRUC IntMask;
+#endif /* RTMP_MAC_PCI // */
+/* INT_MASK_CSR_STRUC IntMask; */
ULONG i = 0, j = 0;
AC_TXOP_CSR0_STRUC csr0;
DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAdapter\n"));
- // 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits:
+ /* 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits: */
retry:
i = 0;
do {
GloCfg.field.EnTXWriteBackDDONE = 1;
RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);
- // Record HW Beacon offset
+ /* Record HW Beacon offset */
pAd->BeaconOffset[0] = HW_BEACON_BASE0;
pAd->BeaconOffset[1] = HW_BEACON_BASE1;
pAd->BeaconOffset[2] = HW_BEACON_BASE2;
pAd->BeaconOffset[6] = HW_BEACON_BASE6;
pAd->BeaconOffset[7] = HW_BEACON_BASE7;
- //
- // write all shared Ring's base address into ASIC
- //
+ /* */
+ /* write all shared Ring's base address into ASIC */
+ /* */
- // asic simulation sequence put this ahead before loading firmware.
- // pbf hardware reset
+ /* asic simulation sequence put this ahead before loading firmware. */
+ /* pbf hardware reset */
#ifdef RTMP_MAC_PCI
- RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f); // 0x10000 for reset rx, 0x3f resets all 6 tx rings.
+ RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f); /* 0x10000 for reset rx, 0x3f resets all 6 tx rings. */
RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe1f);
RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe00);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // Initialze ASIC for TX & Rx operation
+ /* Initialze ASIC for TX & Rx operation */
if (NICInitializeAsic(pAd, bHardReset) != NDIS_STATUS_SUCCESS) {
if (j++ == 0) {
NICLoadFirmware(pAd);
}
#ifdef RTMP_MAC_PCI
- // Write AC_BK base address register
+ /* Write AC_BK base address register */
Value =
RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BK].Cell[0].AllocPa);
RTMP_IO_WRITE32(pAd, TX_BASE_PTR1, Value);
DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR1 : 0x%x\n", Value));
- // Write AC_BE base address register
+ /* Write AC_BE base address register */
Value =
RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BE].Cell[0].AllocPa);
RTMP_IO_WRITE32(pAd, TX_BASE_PTR0, Value);
DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR0 : 0x%x\n", Value));
- // Write AC_VI base address register
+ /* Write AC_VI base address register */
Value =
RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_VI].Cell[0].AllocPa);
RTMP_IO_WRITE32(pAd, TX_BASE_PTR2, Value);
DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR2 : 0x%x\n", Value));
- // Write AC_VO base address register
+ /* Write AC_VO base address register */
Value =
RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_VO].Cell[0].AllocPa);
RTMP_IO_WRITE32(pAd, TX_BASE_PTR3, Value);
DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR3 : 0x%x\n", Value));
- // Write MGMT_BASE_CSR register
+ /* Write MGMT_BASE_CSR register */
Value = RTMP_GetPhysicalAddressLow(pAd->MgmtRing.Cell[0].AllocPa);
RTMP_IO_WRITE32(pAd, TX_BASE_PTR5, Value);
DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR5 : 0x%x\n", Value));
- // Write RX_BASE_CSR register
+ /* Write RX_BASE_CSR register */
Value = RTMP_GetPhysicalAddressLow(pAd->RxRing.Cell[0].AllocPa);
RTMP_IO_WRITE32(pAd, RX_BASE_PTR, Value);
DBGPRINT(RT_DEBUG_TRACE, ("--> RX_BASE_PTR : 0x%x\n", Value));
- // Init RX Ring index pointer
+ /* Init RX Ring index pointer */
pAd->RxRing.RxSwReadIdx = 0;
pAd->RxRing.RxCpuIdx = RX_RING_SIZE - 1;
RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx);
- // Init TX rings index pointer
+ /* Init TX rings index pointer */
{
for (i = 0; i < NUM_OF_TX_RING; i++) {
pAd->TxRing[i].TxSwFreeIdx = 0;
}
}
- // init MGMT ring index pointer
+ /* init MGMT ring index pointer */
pAd->MgmtRing.TxSwFreeIdx = 0;
pAd->MgmtRing.TxCpuIdx = 0;
RTMP_IO_WRITE32(pAd, TX_MGMTCTX_IDX, pAd->MgmtRing.TxCpuIdx);
- //
- // set each Ring's SIZE into ASIC. Descriptor Size is fixed by design.
- //
+ /* */
+ /* set each Ring's SIZE into ASIC. Descriptor Size is fixed by design. */
+ /* */
- // Write TX_RING_CSR0 register
+ /* Write TX_RING_CSR0 register */
Value = TX_RING_SIZE;
RTMP_IO_WRITE32(pAd, TX_MAX_CNT0, Value);
RTMP_IO_WRITE32(pAd, TX_MAX_CNT1, Value);
Value = MGMT_RING_SIZE;
RTMP_IO_WRITE32(pAd, TX_MGMTMAX_CNT, Value);
- // Write RX_RING_CSR register
+ /* Write RX_RING_CSR register */
Value = RX_RING_SIZE;
RTMP_IO_WRITE32(pAd, RX_MAX_CNT, Value);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // WMM parameter
+ /* WMM parameter */
csr0.word = 0;
RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
if (pAd->CommonCfg.PhyMode == PHY_11B) {
- csr0.field.Ac0Txop = 192; // AC_VI: 192*32us ~= 6ms
- csr0.field.Ac1Txop = 96; // AC_VO: 96*32us ~= 3ms
+ csr0.field.Ac0Txop = 192; /* AC_VI: 192*32us ~= 6ms */
+ csr0.field.Ac1Txop = 96; /* AC_VO: 96*32us ~= 3ms */
} else {
- csr0.field.Ac0Txop = 96; // AC_VI: 96*32us ~= 3ms
- csr0.field.Ac1Txop = 48; // AC_VO: 48*32us ~= 1.5ms
+ csr0.field.Ac0Txop = 96; /* AC_VI: 96*32us ~= 3ms */
+ csr0.field.Ac1Txop = 48; /* AC_VO: 48*32us ~= 1.5ms */
}
RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word);
#ifdef RTMP_MAC_PCI
- // 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits:
+ /* 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits: */
i = 0;
do {
RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
IntCfg.word = 0;
RTMP_IO_WRITE32(pAd, DELAY_INT_CFG, IntCfg.word);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // reset action
- // Load firmware
- // Status = NICLoadFirmware(pAd);
+ /* reset action */
+ /* Load firmware */
+ /* Status = NICLoadFirmware(pAd); */
DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAdapter\n"));
return Status;
UINT32 MacCsr0 = 0;
NTSTATUS Status;
UCHAR Value = 0xff;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
#ifdef RT30xx
UCHAR bbpreg = 0;
UCHAR RFValue = 0;
-#endif // RT30xx //
+#endif /* RT30xx // */
USHORT KeyIdx;
INT i, apidx;
DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n"));
#ifdef RTMP_MAC_PCI
- RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x3); // To fix driver disable/enable hang issue when radio off
+ RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x3); /* To fix driver disable/enable hang issue when radio off */
if (bHardReset == TRUE) {
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3);
} else
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
- // Initialize MAC register to default value
+ /* Initialize MAC register to default value */
for (Index = 0; Index < NUM_MAC_REG_PARMS; Index++) {
RTMP_IO_WRITE32(pAd, MACRegTable[Index].Register,
MACRegTable[Index].Value);
STAMACRegTable[Index].Value);
}
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
- //
- // Make sure MAC gets ready after NICLoadFirmware().
- //
+ /* */
+ /* Make sure MAC gets ready after NICLoadFirmware(). */
+ /* */
Index = 0;
- //To avoid hang-on issue when interface up in kernel 2.4,
- //we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly.
+ /*To avoid hang-on issue when interface up in kernel 2.4, */
+ /*we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly. */
do {
RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
pAd->MACVersion = MacCsr0;
DBGPRINT(RT_DEBUG_TRACE,
("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
- // turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue.
+ /* turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue. */
RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacCsr12);
MacCsr12 &= (~0x2000);
RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, MacCsr12);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
- // Initialize MAC register to default value
+ /* Initialize MAC register to default value */
for (Index = 0; Index < NUM_MAC_REG_PARMS; Index++) {
#ifdef RT30xx
if ((MACRegTable[Index].Register == TX_SW_CFG0)
|| IS_RT3090(pAd) || IS_RT3390(pAd))) {
MACRegTable[Index].Value = 0x00000400;
}
-#endif // RT30xx //
+#endif /* RT30xx // */
RTMP_IO_WRITE32(pAd, (USHORT) MACRegTable[Index].Register,
MACRegTable[Index].Value);
}
STAMACRegTable[Index].Value);
}
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
#ifdef RT30xx
- // Initialize RT3070 serial MAC registers which is different from RT2870 serial
+ /* Initialize RT3070 serial MAC registers which is different from RT2870 serial */
if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) {
RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
- // RT3071 version E has fixed this issue
+ /* RT3071 version E has fixed this issue */
if ((pAd->MACVersion & 0xffff) < 0x0211) {
if (pAd->NicConfig2.field.DACTestBit == 1) {
- RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x2C); // To fix throughput drop drastically
+ RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x2C); /* To fix throughput drop drastically */
} else {
- RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F); // To fix throughput drop drastically
+ RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F); /* To fix throughput drop drastically */
}
} else {
RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0);
} else if (IS_RT3070(pAd)) {
if (((pAd->MACVersion & 0xffff) < 0x0201)) {
RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
- RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x2C); // To fix throughput drop drastically
+ RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x2C); /* To fix throughput drop drastically */
} else {
RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0);
}
}
-#endif // RT30xx //
+#endif /* RT30xx // */
- //
- // Before program BBP, we need to wait BBP/RF get wake up.
- //
+ /* */
+ /* Before program BBP, we need to wait BBP/RF get wake up. */
+ /* */
Index = 0;
do {
RTMP_IO_READ32(pAd, MAC_STATUS_CFG, &MacCsr12);
- if ((MacCsr12 & 0x03) == 0) // if BB.RF is stable
+ if ((MacCsr12 & 0x03) == 0) /* if BB.RF is stable */
break;
DBGPRINT(RT_DEBUG_TRACE,
RTMPusecDelay(1000);
} while (Index++ < 100);
- // The commands to firmware should be after these commands, these commands will init firmware
- // PCI and USB are not the same because PCI driver needs to wait for PCI bus ready
- RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0); // initialize BBP R/W access agent
+ /* The commands to firmware should be after these commands, these commands will init firmware */
+ /* PCI and USB are not the same because PCI driver needs to wait for PCI bus ready */
+ RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0); /* initialize BBP R/W access agent */
RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0);
#ifdef RT3090
- //2008/11/28:KH add to fix the dead rf frequency offset bug<--
+ /*2008/11/28:KH add to fix the dead rf frequency offset bug<-- */
AsicSendCommandToMcu(pAd, 0x72, 0, 0, 0);
- //2008/11/28:KH add to fix the dead rf frequency offset bug-->
-#endif // RT3090 //
+ /*2008/11/28:KH add to fix the dead rf frequency offset bug--> */
+#endif /* RT3090 // */
RTMPusecDelay(1000);
- // Read BBP register, make sure BBP is up and running before write new data
+ /* Read BBP register, make sure BBP is up and running before write new data */
Index = 0;
do {
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R0, &R0);
DBGPRINT(RT_DEBUG_TRACE, ("BBP version = %x\n", R0));
} while ((++Index < 20) && ((R0 == 0xff) || (R0 == 0x00)));
- //ASSERT(Index < 20); //this will cause BSOD on Check-build driver
+ /*ASSERT(Index < 20); //this will cause BSOD on Check-build driver */
if ((R0 == 0xff) || (R0 == 0x00))
return NDIS_STATUS_FAILURE;
- // Initialize BBP register to default value
+ /* Initialize BBP register to default value */
for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++) {
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register,
BBPRegTable[Index].Value);
}
#ifdef RTMP_MAC_PCI
- // TODO: shiang, check MACVersion, currently, rbus-based chip use this.
+ /* TODO: shiang, check MACVersion, currently, rbus-based chip use this. */
if (pAd->MACVersion == 0x28720200) {
- //UCHAR value;
+ /*UCHAR value; */
ULONG value2;
- //disable MLD by Bruce 20080704
- //BBP_IO_READ8_BY_REG_ID(pAd, BBP_R105, &value);
- //BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, value | 4);
+ /*disable MLD by Bruce 20080704 */
+ /*BBP_IO_READ8_BY_REG_ID(pAd, BBP_R105, &value); */
+ /*BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, value | 4); */
- //Maximum PSDU length from 16K to 32K bytes
+ /*Maximum PSDU length from 16K to 32K bytes */
RTMP_IO_READ32(pAd, MAX_LEN_CFG, &value2);
value2 &= ~(0x3 << 12);
value2 |= (0x2 << 12);
RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, value2);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
- // RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
- //3070/71/72,3090,3090A( are included in RT30xx),3572,3390
+ /* for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. */
+ /* RT3090 should not program BBP R84 to 0x19, otherwise TX will block. */
+ /*3070/71/72,3090,3090A( are included in RT30xx),3572,3390 */
if (((pAd->MACVersion & 0xffff) != 0x0101)
&& !(IS_RT30xx(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)))
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
#ifdef RT30xx
-// add by johnli, RF power sequence setup
- if (IS_RT30xx(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) { //update for RT3070/71/72/90/91/92,3572,3390.
+/* add by johnli, RF power sequence setup */
+ if (IS_RT30xx(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) { /*update for RT3070/71/72/90/91/92,3572,3390. */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R79, 0x13);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R80, 0x05);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R81, 0x33);
}
- if (IS_RT3090(pAd) || IS_RT3390(pAd)) // RT309x, RT3071/72
+ if (IS_RT3090(pAd) || IS_RT3390(pAd)) /* RT309x, RT3071/72 */
{
- // enable DC filter
+ /* enable DC filter */
if ((pAd->MACVersion & 0xffff) >= 0x0211) {
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0);
}
- // improve power consumption
+ /* improve power consumption */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg);
if (pAd->Antenna.field.TxPath == 1) {
- // turn off tx DAC_1
+ /* turn off tx DAC_1 */
bbpreg = (bbpreg | 0x20);
}
if (pAd->Antenna.field.RxPath == 1) {
- // turn off tx ADC_1
+ /* turn off tx ADC_1 */
bbpreg &= (~0x2);
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg);
- // improve power consumption in RT3071 Ver.E
+ /* improve power consumption in RT3071 Ver.E */
if ((pAd->MACVersion & 0xffff) >= 0x0211) {
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg);
bbpreg &= (~0x3);
}
} else if (IS_RT3070(pAd)) {
if ((pAd->MACVersion & 0xffff) >= 0x0201) {
- // enable DC filter
+ /* enable DC filter */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0);
- // improve power consumption in RT3070 Ver.F
+ /* improve power consumption in RT3070 Ver.F */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg);
bbpreg &= (~0x3);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg);
}
- // TX_LO1_en, RF R17 register Bit 3 to 0
+ /* TX_LO1_en, RF R17 register Bit 3 to 0 */
RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
RFValue &= (~0x08);
- // to fix rx long range issue
+ /* to fix rx long range issue */
if (pAd->NicConfig2.field.ExternalLNAForG == 0) {
RFValue |= 0x20;
}
- // set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h
+ /* set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h */
if (pAd->TxMixerGain24G >= 1) {
- RFValue &= (~0x7); // clean bit [2:0]
+ RFValue &= (~0x7); /* clean bit [2:0] */
RFValue |= pAd->TxMixerGain24G;
}
RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
}
-// end johnli
-#endif // RT30xx //
+/* end johnli */
+#endif /* RT30xx // */
if (pAd->MACVersion == 0x28600100) {
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12);
}
- if (pAd->MACVersion >= RALINK_2880E_VERSION && pAd->MACVersion < RALINK_3070_VERSION) // 3*3
+ if (pAd->MACVersion >= RALINK_2880E_VERSION && pAd->MACVersion < RALINK_3070_VERSION) /* 3*3 */
{
- // enlarge MAX_LEN_CFG
+ /* enlarge MAX_LEN_CFG */
UINT32 csr;
RTMP_IO_READ32(pAd, MAX_LEN_CFG, &csr);
csr &= 0xFFF;
UCHAR MAC_Value[] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0 };
- //Initialize WCID table
+ /*Initialize WCID table */
Value = 0xff;
for (Index = 0; Index < 254; Index++) {
RTUSBMultiWrite(pAd,
MAC_Value, 8);
}
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- // Add radio off control
+ /* Add radio off control */
{
if (pAd->StaCfg.bRadio == FALSE) {
-// RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818);
+/* RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818); */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n"));
}
}
- // Clear raw counters
+ /* Clear raw counters */
RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
- // ASIC will keep garbage value after boot
- // Clear all shared key table when initial
- // This routine can be ignored in radio-ON/OFF operation.
+ /* ASIC will keep garbage value after boot */
+ /* Clear all shared key table when initial */
+ /* This routine can be ignored in radio-ON/OFF operation. */
if (bHardReset) {
for (KeyIdx = 0; KeyIdx < 4; KeyIdx++) {
RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE + 4 * KeyIdx,
0);
}
- // Clear all pairwise key table when initial
+ /* Clear all pairwise key table when initial */
for (KeyIdx = 0; KeyIdx < 256; KeyIdx++) {
RTMP_IO_WRITE32(pAd,
MAC_WCID_ATTRIBUTE_BASE +
(KeyIdx * HW_WCID_ATTRI_SIZE), 1);
}
}
- // assert HOST ready bit
-// RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x0); // 2004-09-14 asked by Mark
-// RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x4);
+ /* assert HOST ready bit */
+/* RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x0); // 2004-09-14 asked by Mark */
+/* RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x4); */
- // It isn't necessary to clear this space when not hard reset.
+ /* It isn't necessary to clear this space when not hard reset. */
if (bHardReset == TRUE) {
- // clear all on-chip BEACON frame space
+ /* clear all on-chip BEACON frame space */
for (apidx = 0; apidx < HW_BEACON_MAX_COUNT; apidx++) {
for (i = 0; i < HW_BEACON_OFFSET >> 2; i += 4)
RTMP_IO_WRITE32(pAd,
}
#ifdef RTMP_MAC_USB
AsicDisableSync(pAd);
- // Clear raw counters
+ /* Clear raw counters */
RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter);
RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
- // Default PCI clock cycle per ms is different as default setting, which is based on PCI.
+ /* Default PCI clock cycle per ms is different as default setting, which is based on PCI. */
RTMP_IO_READ32(pAd, USB_CYC_CFG, &Counter);
Counter &= 0xffffff00;
Counter |= 0x000001e;
RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
{
- // for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
+ /* for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT. */
if ((pAd->MACVersion & 0xffff) != 0x0101)
RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f);
}
UINT32 Value = 0;
DBGPRINT(RT_DEBUG_TRACE, ("--> NICIssueReset\n"));
- // Abort Tx, prevent ASIC from writing to Host memory
- //RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x001f0000);
+ /* Abort Tx, prevent ASIC from writing to Host memory */
+ /*RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x001f0000); */
- // Disable Rx, register value supposed will remain after reset
+ /* Disable Rx, register value supposed will remain after reset */
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= (0xfffffff3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
- // Issue reset and clear from reset state
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x03); // 2004-09-17 change from 0x01
+ /* Issue reset and clear from reset state */
+ RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x03); /* 2004-09-17 change from 0x01 */
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x00);
DBGPRINT(RT_DEBUG_TRACE, ("<-- NICIssueReset\n"));
pEntry->DebugFIFOCount++;
- if (StaFifo.field.TxBF) // 3*3
+ if (StaFifo.field.TxBF) /* 3*3 */
pEntry->TxBFCount++;
if (!StaFifo.field.TxSuccess) {
FALSE);
}
- // Update the continuous transmission counter except PS mode
+ /* Update the continuous transmission counter except PS mode */
pEntry->ContinueTxFailCnt++;
} else {
- // Clear the FIFOCount when sta in Power Save mode. Basically we assume
- // this tx error happened due to sta just go to sleep.
+ /* Clear the FIFOCount when sta in Power Save mode. Basically we assume */
+ /* this tx error happened due to sta just go to sleep. */
pEntry->FIFOCount = 0;
pEntry->ContinueTxFailCnt = 0;
}
- //pEntry->FIFOCount = 0;
+ /*pEntry->FIFOCount = 0; */
}
- //pEntry->bSendBAR = TRUE;
+ /*pEntry->bSendBAR = TRUE; */
} else {
if ((pEntry->PsMode != PWR_SAVE)
&& (pEntry->NoBADataCountDown > 0)) {
pEntry->FIFOCount = 0;
pEntry->OneSecTxNoRetryOkCount++;
- // update NoDataIdleCount when sucessful send packet to STA.
+ /* update NoDataIdleCount when sucessful send packet to STA. */
pEntry->NoDataIdleCount = 0;
pEntry->ContinueTxFailCnt = 0;
}
}
i++;
- // ASIC store 16 stack
+ /* ASIC store 16 stack */
} while (i < (2 * TX_RING_SIZE));
}
*/
VOID NICUpdateRawCounters(IN PRTMP_ADAPTER pAd)
{
- UINT32 OldValue; //, Value2;
- //ULONG PageSum, OneSecTransmitCount;
- //ULONG TxErrorRatio, Retry, Fail;
+ UINT32 OldValue; /*, Value2; */
+ /*ULONG PageSum, OneSecTransmitCount; */
+ /*ULONG TxErrorRatio, Retry, Fail; */
RX_STA_CNT0_STRUC RxStaCnt0;
RX_STA_CNT1_STRUC RxStaCnt1;
RX_STA_CNT2_STRUC RxStaCnt2;
{
RTMP_IO_READ32(pAd, RX_STA_CNT1, &RxStaCnt1.word);
- // Update RX PLCP error counter
+ /* Update RX PLCP error counter */
pAd->PrivateInfo.PhyRxErrCnt += RxStaCnt1.field.PlcpErr;
- // Update False CCA counter
+ /* Update False CCA counter */
pAd->RalinkCounters.OneSecFalseCCACnt +=
RxStaCnt1.field.FalseCca;
}
- // Update FCS counters
+ /* Update FCS counters */
OldValue = pAd->WlanCounters.FCSErrorCount.u.LowPart;
- pAd->WlanCounters.FCSErrorCount.u.LowPart += (RxStaCnt0.field.CrcErr); // >> 7);
+ pAd->WlanCounters.FCSErrorCount.u.LowPart += (RxStaCnt0.field.CrcErr); /* >> 7); */
if (pAd->WlanCounters.FCSErrorCount.u.LowPart < OldValue)
pAd->WlanCounters.FCSErrorCount.u.HighPart++;
- // Add FCS error count to private counters
+ /* Add FCS error count to private counters */
pRalinkCounters->OneSecRxFcsErrCnt += RxStaCnt0.field.CrcErr;
OldValue = pRalinkCounters->RealFcsErrCount.u.LowPart;
pRalinkCounters->RealFcsErrCount.u.LowPart += RxStaCnt0.field.CrcErr;
if (pRalinkCounters->RealFcsErrCount.u.LowPart < OldValue)
pRalinkCounters->RealFcsErrCount.u.HighPart++;
- // Update Duplicate Rcv check
+ /* Update Duplicate Rcv check */
pRalinkCounters->DuplicateRcv += RxStaCnt2.field.RxDupliCount;
pAd->WlanCounters.FrameDuplicateCount.u.LowPart +=
RxStaCnt2.field.RxDupliCount;
- // Update RX Overflow counter
+ /* Update RX Overflow counter */
pAd->Counters8023.RxNoBuffer += (RxStaCnt2.field.RxFifoOverflowCount);
- //pAd->RalinkCounters.RxCount = 0;
+ /*pAd->RalinkCounters.RxCount = 0; */
#ifdef RTMP_MAC_USB
if (pRalinkCounters->RxCount != pAd->watchDogRxCnt) {
pAd->watchDogRxCnt = pRalinkCounters->RxCount;
else
pAd->watchDogRxOverFlowCnt = 0;
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- //if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) ||
- // (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) && (pAd->MacTab.Size != 1)))
+ /*if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) || */
+ /* (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) && (pAd->MacTab.Size != 1))) */
if (!pAd->bUpdateBcnCntDone) {
- // Update BEACON sent count
+ /* Update BEACON sent count */
RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
RTMP_IO_READ32(pAd, TX_STA_CNT2, &StaTx2.word);
TxStaCnt0.field.TxFailCount;
}
- //if (pAd->bStaFifoTest == TRUE)
+ /*if (pAd->bStaFifoTest == TRUE) */
{
RTMP_IO_READ32(pAd, TX_AGG_CNT, &TxAggCnt.word);
RTMP_IO_READ32(pAd, TX_AGG_CNT0, &TxAggCnt0.word);
pRalinkCounters->TxAgg16MPDUCount +=
TxAggCnt7.field.AggSize16Count;
- // Calculate the transmitted A-MPDU count
+ /* Calculate the transmitted A-MPDU count */
pRalinkCounters->TransmittedAMPDUCount.u.LowPart +=
TxAggCnt0.field.AggSize1Count;
pRalinkCounters->TransmittedAMPDUCount.u.LowPart +=
*/
VOID NICResetFromError(IN PRTMP_ADAPTER pAd)
{
- // Reset BBP (according to alex, reset ASIC will force reset BBP
- // Therefore, skip the reset BBP
- // RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x2);
+ /* Reset BBP (according to alex, reset ASIC will force reset BBP */
+ /* Therefore, skip the reset BBP */
+ /* RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x2); */
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
- // Remove ASIC from reset state
+ /* Remove ASIC from reset state */
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
NICInitializeAdapter(pAd, FALSE);
NICInitAsicFromEEPROM(pAd);
- // Switch to current channel, since during reset process, the connection should remains on.
+ /* Switch to current channel, since during reset process, the connection should remains on. */
AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
}
return (2);
}
- // Equal
+ /* Equal */
return (0);
}
DBGPRINT(RT_DEBUG_TRACE, ("--> UserCfgInit\n"));
- //
- // part I. intialize common configuration
- //
+ /* */
+ /* part I. intialize common configuration */
+ /* */
#ifdef RTMP_MAC_USB
pAd->BulkOutReq = 0;
pAd->BulkInComplete = 0;
pAd->BulkInCompleteFail = 0;
- //pAd->QuickTimerP = 100;
- //pAd->TurnAggrBulkInCount = 0;
+ /*pAd->QuickTimerP = 100; */
+ /*pAd->TurnAggrBulkInCount = 0; */
pAd->bUsbTxBulkAggre = 0;
- // init as unsed value to ensure driver will set to MCU once.
+ /* init as unsed value to ensure driver will set to MCU once. */
pAd->LedIndicatorStrength = 0xFF;
pAd->CommonCfg.MaxPktOneTxBulk = 2;
pAd->CommonCfg.TxBulkFactor = 1;
pAd->CommonCfg.RxBulkFactor = 1;
- pAd->CommonCfg.TxPower = 100; //mW
+ pAd->CommonCfg.TxPower = 100; /*mW */
NdisZeroMemory(&pAd->CommonCfg.IOTestParm,
sizeof(pAd->CommonCfg.IOTestParm));
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
for (key_index = 0; key_index < SHARE_KEY_NUM; key_index++) {
for (bss_index = 0; bss_index < MAX_MBSSID_NUM; bss_index++) {
pAd->HostLnkCtrlOffset = 0;
pAd->StaCfg.PSControl.field.EnableNewPS = TRUE;
pAd->CheckDmaBusyCount = 0;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- pAd->bAutoTxAgcA = FALSE; // Default is OFF
- pAd->bAutoTxAgcG = FALSE; // Default is OFF
+ pAd->bAutoTxAgcA = FALSE; /* Default is OFF */
+ pAd->bAutoTxAgcG = FALSE; /* Default is OFF */
pAd->RfIcType = RFIC_2820;
- // Init timer for reset complete event
+ /* Init timer for reset complete event */
pAd->CommonCfg.CentralChannel = 1;
pAd->bForcePrintTX = FALSE;
pAd->bForcePrintRX = FALSE;
pAd->bStaFifoTest = FALSE;
pAd->bProtectionTest = FALSE;
- pAd->CommonCfg.Dsifs = 10; // in units of usec
- pAd->CommonCfg.TxPower = 100; //mW
- pAd->CommonCfg.TxPowerPercentage = 0xffffffff; // AUTO
- pAd->CommonCfg.TxPowerDefault = 0xffffffff; // AUTO
- pAd->CommonCfg.TxPreamble = Rt802_11PreambleAuto; // use Long preamble on TX by defaut
+ pAd->CommonCfg.Dsifs = 10; /* in units of usec */
+ pAd->CommonCfg.TxPower = 100; /*mW */
+ pAd->CommonCfg.TxPowerPercentage = 0xffffffff; /* AUTO */
+ pAd->CommonCfg.TxPowerDefault = 0xffffffff; /* AUTO */
+ pAd->CommonCfg.TxPreamble = Rt802_11PreambleAuto; /* use Long preamble on TX by defaut */
pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
pAd->CommonCfg.RtsThreshold = 2347;
pAd->CommonCfg.FragmentThreshold = 2346;
- pAd->CommonCfg.UseBGProtection = 0; // 0: AUTO
- pAd->CommonCfg.bEnableTxBurst = TRUE; //0;
- pAd->CommonCfg.PhyMode = 0xff; // unknown
+ pAd->CommonCfg.UseBGProtection = 0; /* 0: AUTO */
+ pAd->CommonCfg.bEnableTxBurst = TRUE; /*0; */
+ pAd->CommonCfg.PhyMode = 0xff; /* unknown */
pAd->CommonCfg.BandState = UNKNOWN_BAND;
pAd->CommonCfg.RadarDetect.CSPeriod = 10;
pAd->CommonCfg.RadarDetect.CSCount = 0;
pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
pAd->CommonCfg.BACapability.field.MpduDensity = 0;
pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
- pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64; //32;
- pAd->CommonCfg.BACapability.field.TxBAWinLimit = 64; //32;
+ pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64; /*32; */
+ pAd->CommonCfg.BACapability.field.TxBAWinLimit = 64; /*32; */
DBGPRINT(RT_DEBUG_TRACE,
("--> UserCfgInit. BACapability = 0x%x\n",
pAd->CommonCfg.BACapability.word));
pAd->CommonCfg.bExtChannelSwitchAnnouncement = 1;
pAd->CommonCfg.bHTProtect = 1;
pAd->CommonCfg.bMIMOPSEnable = TRUE;
- //2008/11/05:KH add to support Antenna power-saving of AP<--
+ /*2008/11/05:KH add to support Antenna power-saving of AP<-- */
pAd->CommonCfg.bGreenAPEnable = FALSE;
- //2008/11/05:KH add to support Antenna power-saving of AP-->
+ /*2008/11/05:KH add to support Antenna power-saving of AP--> */
pAd->CommonCfg.bBADecline = FALSE;
pAd->CommonCfg.bDisableReordering = FALSE;
if (pAd->MACVersion == 0x28720200) {
- pAd->CommonCfg.TxBASize = 13; //by Jerry recommend
+ pAd->CommonCfg.TxBASize = 13; /*by Jerry recommend */
} else {
pAd->CommonCfg.TxBASize = 7;
}
pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word;
- //pAd->CommonCfg.HTPhyMode.field.BW = BW_20;
- //pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO;
- //pAd->CommonCfg.HTPhyMode.field.ShortGI = GI_800;
- //pAd->CommonCfg.HTPhyMode.field.STBC = STBC_NONE;
+ /*pAd->CommonCfg.HTPhyMode.field.BW = BW_20; */
+ /*pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO; */
+ /*pAd->CommonCfg.HTPhyMode.field.ShortGI = GI_800; */
+ /*pAd->CommonCfg.HTPhyMode.field.STBC = STBC_NONE; */
pAd->CommonCfg.TxRate = RATE_6;
pAd->CommonCfg.MlmeTransmit.field.MCS = MCS_RATE_6;
pAd->CommonCfg.MlmeTransmit.field.BW = BW_20;
pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
- pAd->CommonCfg.BeaconPeriod = 100; // in mSec
+ pAd->CommonCfg.BeaconPeriod = 100; /* in mSec */
- //
- // part II. intialize STA specific configuration
- //
+ /* */
+ /* part II. intialize STA specific configuration */
+ /* */
{
RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
RX_FILTER_CLEAR_FLAG(pAd, fRX_FILTER_ACCEPT_MULTICAST);
pAd->StaCfg.bMixCipher = FALSE;
pAd->StaCfg.DefaultKeyId = 0;
- // 802.1x port control
+ /* 802.1x port control */
pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
pAd->StaCfg.LastMicErrorTime = 0;
pAd->StaCfg.bBlockAssoc = FALSE;
pAd->StaCfg.WpaState = SS_NOTUSE;
- pAd->CommonCfg.NdisRadioStateOff = FALSE; // New to support microsoft disable radio with OID command
+ pAd->CommonCfg.NdisRadioStateOff = FALSE; /* New to support microsoft disable radio with OID command */
pAd->StaCfg.RssiTrigger = 0;
NdisZeroMemory(&pAd->StaCfg.RssiSample, sizeof(RSSI_SAMPLE));
pAd->StaCfg.RssiTriggerMode =
RSSI_TRIGGERED_UPON_BELOW_THRESHOLD;
pAd->StaCfg.AtimWin = 0;
- pAd->StaCfg.DefaultListenCount = 3; //default listen count;
- pAd->StaCfg.BssType = BSS_INFRA; // BSS_INFRA or BSS_ADHOC or BSS_MONITOR
+ pAd->StaCfg.DefaultListenCount = 3; /*default listen count; */
+ pAd->StaCfg.BssType = BSS_INFRA; /* BSS_INFRA or BSS_ADHOC or BSS_MONITOR */
pAd->StaCfg.bScanReqIsFromWebUI = FALSE;
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WAKEUP_NOW);
#ifdef PCIE_PS_SUPPORT
pAd->brt30xxBanMcuCmd = FALSE;
pAd->b3090ESpecialChip = FALSE;
-//KH Debug:the following must be removed
+/*KH Debug:the following must be removed */
pAd->StaCfg.PSControl.field.rt30xxPowerMode = 3;
pAd->StaCfg.PSControl.field.rt30xxForceASPMTest = 0;
pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM = 1;
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
- // global variables mXXXX used in MAC protocol state machines
+ /* global variables mXXXX used in MAC protocol state machines */
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
- // PHY specification
- pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; // default PHY mode
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED); // CCK use LONG preamble
+ /* PHY specification */
+ pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; /* default PHY mode */
+ OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED); /* CCK use LONG preamble */
{
- // user desired power mode
+ /* user desired power mode */
pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
pAd->StaCfg.bWindowsACCAMEnable = FALSE;
pAd, FALSE);
pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
- // Patch for Ndtest
+ /* Patch for Ndtest */
pAd->StaCfg.ScanCnt = 0;
- pAd->StaCfg.bHwRadio = TRUE; // Default Hardware Radio status is On
- pAd->StaCfg.bSwRadio = TRUE; // Default Software Radio status is On
- pAd->StaCfg.bRadio = TRUE; // bHwRadio && bSwRadio
- pAd->StaCfg.bHardwareRadio = FALSE; // Default is OFF
- pAd->StaCfg.bShowHiddenSSID = FALSE; // Default no show
+ pAd->StaCfg.bHwRadio = TRUE; /* Default Hardware Radio status is On */
+ pAd->StaCfg.bSwRadio = TRUE; /* Default Software Radio status is On */
+ pAd->StaCfg.bRadio = TRUE; /* bHwRadio && bSwRadio */
+ pAd->StaCfg.bHardwareRadio = FALSE; /* Default is OFF */
+ pAd->StaCfg.bShowHiddenSSID = FALSE; /* Default no show */
- // Nitro mode control
+ /* Nitro mode control */
pAd->StaCfg.bAutoReconnect = TRUE;
- // Save the init time as last scan time, the system should do scan after 2 seconds.
- // This patch is for driver wake up from standby mode, system will do scan right away.
+ /* Save the init time as last scan time, the system should do scan after 2 seconds. */
+ /* This patch is for driver wake up from standby mode, system will do scan right away. */
NdisGetSystemUpTime(&pAd->StaCfg.LastScanTime);
if (pAd->StaCfg.LastScanTime > 10 * OS_HZ)
pAd->StaCfg.LastScanTime -= (10 * OS_HZ);
NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE + 1);
#ifdef RTMP_MAC_PCI
sprintf((PSTRING) pAd->nickname, "RT2860STA");
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
sprintf((PSTRING) pAd->nickname, "RT2870STA");
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer,
GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc),
pAd, FALSE);
pAd->StaCfg.bForceTxBurst = FALSE;
}
- // Default for extra information is not valid
+ /* Default for extra information is not valid */
pAd->ExtraInfo = EXTRA_INFO_CLEAR;
- // Default Config change flag
+ /* Default Config change flag */
pAd->bConfigChanged = FALSE;
- //
- // part III. AP configurations
- //
+ /* */
+ /* part III. AP configurations */
+ /* */
- //
- // part IV. others
- //
- // dynamic BBP R66:sensibity tuning to overcome background noise
+ /* */
+ /* part IV. others */
+ /* */
+ /* dynamic BBP R66:sensibity tuning to overcome background noise */
pAd->BbpTuning.bEnable = TRUE;
pAd->BbpTuning.FalseCcaLowerThreshold = 100;
pAd->BbpTuning.FalseCcaUpperThreshold = 512;
pAd->BbpTuning.R66Delta = 4;
pAd->Mlme.bEnableAutoAntennaCheck = TRUE;
- //
- // Also initial R66CurrentValue, RTUSBResumeMsduTransmission might use this value.
- // if not initial this value, the default value will be 0.
- //
+ /* */
+ /* Also initial R66CurrentValue, RTUSBResumeMsduTransmission might use this value. */
+ /* if not initial this value, the default value will be 0. */
+ /* */
pAd->BbpTuning.R66CurrentValue = 0x38;
pAd->Bbp94 = BBPR94_DEFAULT;
pAd->BbpForCCK = FALSE;
- // Default is FALSE for test bit 1
- //pAd->bTest1 = FALSE;
+ /* Default is FALSE for test bit 1 */
+ /*pAd->bTest1 = FALSE; */
- // initialize MAC table and allocate spin lock
+ /* initialize MAC table and allocate spin lock */
NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));
InitializeQueueHeader(&pAd->MacTab.McastPsQueue);
NdisAllocateSpinLock(&pAd->MacTabLock);
- //RTMPInitTimer(pAd, &pAd->RECBATimer, RECBATimerTimeout, pAd, TRUE);
- //RTMPSetTimer(&pAd->RECBATimer, REORDER_EXEC_INTV);
+ /*RTMPInitTimer(pAd, &pAd->RECBATimer, RECBATimerTimeout, pAd, TRUE); */
+ /*RTMPSetTimer(&pAd->RECBATimer, REORDER_EXEC_INTV); */
pAd->CommonCfg.bWiFiTest = FALSE;
#ifdef RTMP_MAC_PCI
pAd->bPCIclkOff = FALSE;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n"));
}
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
UCHAR BtoH(STRING ch)
{
if (ch >= '0' && ch <= '9')
- return (ch - '0'); // Handle numerals
+ return (ch - '0'); /* Handle numerals */
if (ch >= 'A' && ch <= 'F')
- return (ch - 'A' + 0xA); // Handle capitol hex digits
+ return (ch - 'A' + 0xA); /* Handle capitol hex digits */
if (ch >= 'a' && ch <= 'f')
- return (ch - 'a' + 0xA); // Handle small hex digits
+ return (ch - 'a' + 0xA); /* Handle small hex digits */
return (255);
}
-//
-// FUNCTION: AtoH(char *, UCHAR *, int)
-//
-// PURPOSE: Converts ascii string to network order hex
-//
-// PARAMETERS:
-// src - pointer to input ascii string
-// dest - pointer to output hex
-// destlen - size of dest
-//
-// COMMENTS:
-//
-// 2 ascii bytes make a hex byte so must put 1st ascii byte of pair
-// into upper nibble and 2nd ascii byte of pair into lower nibble.
-//
-// IRQL = PASSIVE_LEVEL
+/* */
+/* FUNCTION: AtoH(char *, UCHAR *, int) */
+/* */
+/* PURPOSE: Converts ascii string to network order hex */
+/* */
+/* PARAMETERS: */
+/* src - pointer to input ascii string */
+/* dest - pointer to output hex */
+/* destlen - size of dest */
+/* */
+/* COMMENTS: */
+/* */
+/* 2 ascii bytes make a hex byte so must put 1st ascii byte of pair */
+/* into upper nibble and 2nd ascii byte of pair into lower nibble. */
+/* */
+/* IRQL = PASSIVE_LEVEL */
void AtoH(PSTRING src, PUCHAR dest, int destlen)
{
destTemp = (PUCHAR) dest;
while (destlen--) {
- *destTemp = BtoH(*srcptr++) << 4; // Put 1st ascii byte in upper nibble.
- *destTemp += BtoH(*srcptr++); // Add 2nd ascii byte to above.
+ *destTemp = BtoH(*srcptr++) << 4; /* Put 1st ascii byte in upper nibble. */
+ *destTemp += BtoH(*srcptr++); /* Add 2nd ascii byte to above. */
destTemp++;
}
}
-//+++Mark by shiang, not use now, need to remove after confirm
-//---Mark by shiang, not use now, need to remove after confirm
+/*+++Mark by shiang, not use now, need to remove after confirm */
+/*---Mark by shiang, not use now, need to remove after confirm */
/*
========================================================================
IN PRALINK_TIMER_STRUCT pTimer,
IN PVOID pTimerFunc, IN PVOID pData, IN BOOLEAN Repeat)
{
- //
- // Set Valid to TRUE for later used.
- // It will crash if we cancel a timer or set a timer
- // that we haven't initialize before.
- //
+ /* */
+ /* Set Valid to TRUE for later used. */
+ /* It will crash if we cancel a timer or set a timer */
+ /* that we haven't initialize before. */
+ /* */
pTimer->Valid = TRUE;
pTimer->PeriodicType = Repeat;
#ifdef RTMP_TIMER_TASK_SUPPORT
pTimer->pAd = pAd;
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
RTMP_OS_Init_Timer(pAd, &pTimer->TimerObj, pTimerFunc, (PVOID) pTimer);
}
pTimer->State = TRUE;
#ifdef RTMP_TIMER_TASK_SUPPORT
- // We need to go-through the TimerQ to findout this timer handler and remove it if
- // it's still waiting for execution.
+ /* We need to go-through the TimerQ to findout this timer handler and remove it if */
+ /* it's still waiting for execution. */
RtmpTimerQRemove(pTimer->pAd, pTimer);
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
} else {
DBGPRINT_ERR(("RTMPCancelTimer failed, Timer hasn't been initialize!\n"));
}
*/
VOID RTMPSetLED(IN PRTMP_ADAPTER pAd, IN UCHAR Status)
{
- //ULONG data;
+ /*ULONG data; */
UCHAR HighByte = 0;
UCHAR LowByte;
AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
break;
case LED_HALT:
- LowByte = 0; // Driver sets MAC register and MAC controls LED
+ LowByte = 0; /* Driver sets MAC register and MAC controls LED */
case LED_RADIO_OFF:
HighByte = 0;
AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
break;
}
- //
- // Keep LED status for LED SiteSurvey mode.
- // After SiteSurvey, we will set the LED mode to previous status.
- //
+ /* */
+ /* Keep LED status for LED SiteSurvey mode. */
+ /* After SiteSurvey, we will set the LED mode to previous status. */
+ /* */
if ((Status != LED_ON_SITE_SURVEY) && (Status != LED_POWER_UP))
pAd->LedStatus = Status;
else
nLed = 31;
- //
- // Update Signal Stregth to firmware if changed.
- //
+ /* */
+ /* Update Signal Stregth to firmware if changed. */
+ /* */
if (pAd->LedIndicatorStrength != nLed) {
AsicSendCommandToMcu(pAd, 0x51, 0xff, nLed,
pAd->LedCntl.field.Polarity);
*/
VOID RTMPEnableRxTx(IN PRTMP_ADAPTER pAd)
{
-// WPDMA_GLO_CFG_STRUC GloCfg;
-// ULONG i = 0;
+/* WPDMA_GLO_CFG_STRUC GloCfg; */
+/* ULONG i = 0; */
UINT32 rx_filter_flag;
DBGPRINT(RT_DEBUG_TRACE, ("==> RTMPEnableRxTx\n"));
- // Enable Rx DMA.
+ /* Enable Rx DMA. */
RT28XXDMAEnable(pAd);
- // enable RX of MAC block
+ /* enable RX of MAC block */
if (pAd->OpMode == OPMODE_AP) {
rx_filter_flag = APNORMAL;
- RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag); // enable RX of DMA block
+ RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag); /* enable RX of DMA block */
} else {
if (pAd->CommonCfg.PSPXlink)
rx_filter_flag = PSPXLINK;
else
- rx_filter_flag = STANORMAL; // Staion not drop control frame will fail WiFi Certification.
+ rx_filter_flag = STANORMAL; /* Staion not drop control frame will fail WiFi Certification. */
RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag);
}
DBGPRINT(RT_DEBUG_TRACE, ("<== RTMPEnableRxTx\n"));
}
-//+++Add by shiang, move from os/linux/rt_main_dev.c
+/*+++Add by shiang, move from os/linux/rt_main_dev.c */
void CfgInitHook(PRTMP_ADAPTER pAd)
{
pAd->bBroadComHT = TRUE;
#ifdef RTMP_MAC_PCI
{
- // If dirver doesn't wake up firmware here,
- // NICLoadFirmware will hang forever when interface is up again.
- // RT2860 PCI
+ /* If dirver doesn't wake up firmware here, */
+ /* NICLoadFirmware will hang forever when interface is up again. */
+ /* RT2860 PCI */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)) {
AUTO_WAKEUP_STRUC AutoWakeupCfg;
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
}
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // reset Adapter flags
+ /* reset Adapter flags */
RTMP_CLEAR_FLAGS(pAd);
- // Init BssTab & ChannelInfo tabbles for auto channel select.
+ /* Init BssTab & ChannelInfo tabbles for auto channel select. */
- // Allocate BA Reordering memory
+ /* Allocate BA Reordering memory */
ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM);
- // Make sure MAC gets ready.
+ /* Make sure MAC gets ready. */
index = 0;
do {
RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
RTMP_IO_WRITE32(pAd, AUX_CTRL, MacCsr0);
DBGPRINT(RT_DEBUG_TRACE, ("AUX_CTRL = 0x%x\n", MacCsr0));
}
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
- // To fix driver disable/enable hang issue when radio off
+ /* To fix driver disable/enable hang issue when radio off */
RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // Disable DMA
+ /* Disable DMA */
RT28XXDMADisable(pAd);
- // Load 8051 firmware
+ /* Load 8051 firmware */
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS) {
DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n",
NICLoadRateSwitchingParams(pAd);
- // Disable interrupts here which is as soon as possible
- // This statement should never be true. We might consider to remove it later
+ /* Disable interrupts here which is as soon as possible */
+ /* This statement should never be true. We might consider to remove it later */
#ifdef RTMP_MAC_PCI
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) {
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
Status = RTMPAllocTxRxRingMemory(pAd);
if (Status != NDIS_STATUS_SUCCESS) {
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
- // initialize MLME
- //
+ /* initialize MLME */
+ /* */
Status = RtmpMgmtTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
goto err2;
}
- // Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default
- //
+ /* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default */
+ /* */
UserCfgInit(pAd);
Status = RtmpNetTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err3;
-// COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);
-// pAd->bForcePrintTX = TRUE;
+/* COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr); */
+/* pAd->bForcePrintTX = TRUE; */
CfgInitHook(pAd);
MeasureReqTabInit(pAd);
TpcReqTabInit(pAd);
- //
- // Init the hardware, we need to init asic before read registry, otherwise mac register will be reset
- //
+ /* */
+ /* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset */
+ /* */
Status = NICInitializeAdapter(pAd, TRUE);
if (Status != NDIS_STATUS_SUCCESS) {
DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n",
pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
else
pAd->CommonCfg.NumOfBulkInIRP = 1;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- //Init Ba Capability parameters.
-// RT28XX_BA_INIT(pAd);
+ /*Init Ba Capability parameters. */
+/* RT28XX_BA_INIT(pAd); */
pAd->CommonCfg.DesiredHtPhy.MpduDensity =
(UCHAR) pAd->CommonCfg.BACapability.field.MpduDensity;
pAd->CommonCfg.DesiredHtPhy.AmsduEnable =
(USHORT) pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.DesiredHtPhy.MimoPs =
(USHORT) pAd->CommonCfg.BACapability.field.MMPSmode;
- // UPdata to HT IE
+ /* UPdata to HT IE */
pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs =
(USHORT) pAd->CommonCfg.BACapability.field.MMPSmode;
pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize =
pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity =
(UCHAR) pAd->CommonCfg.BACapability.field.MpduDensity;
- // after reading Registry, we now know if in AP mode or STA mode
+ /* after reading Registry, we now know if in AP mode or STA mode */
- // Load 8051 firmware; crash when FW image not existent
- // Status = NICLoadFirmware(pAd);
- // if (Status != NDIS_STATUS_SUCCESS)
- // break;
+ /* Load 8051 firmware; crash when FW image not existent */
+ /* Status = NICLoadFirmware(pAd); */
+ /* if (Status != NDIS_STATUS_SUCCESS) */
+ /* break; */
DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
- // We should read EEPROM for all cases. rt2860b
+ /* We should read EEPROM for all cases. rt2860b */
NICReadEEPROMParameters(pAd, (PUCHAR) pDefaultMac);
DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
- NICInitAsicFromEEPROM(pAd); //rt2860b
+ NICInitAsicFromEEPROM(pAd); /*rt2860b */
- // Set PHY to appropriate mode
+ /* Set PHY to appropriate mode */
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
SetCommonHT(pAd);
- // No valid channels.
+ /* No valid channels. */
if (pAd->ChannelListNum == 0) {
DBGPRINT(RT_DEBUG_ERROR,
("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
pAd->CommonCfg.HtCapability.MCSSet[4]));
#ifdef RTMP_RF_RW_SUPPORT
- //Init RT30xx RFRegisters after read RFIC type from EEPROM
+ /*Init RT30xx RFRegisters after read RFIC type from EEPROM */
NICInitRFRegisters(pAd);
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
-// APInitialize(pAd);
+/* APInitialize(pAd); */
- //
- // Initialize RF register to default value
- //
+ /* */
+ /* Initialize RF register to default value */
+ /* */
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
- // 8051 firmware require the signal during booting time.
- //2008/11/28:KH marked the following codes to patch Frequency offset bug
- //AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00);
+ /* 8051 firmware require the signal during booting time. */
+ /*2008/11/28:KH marked the following codes to patch Frequency offset bug */
+ /*AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00); */
if (pAd && (Status != NDIS_STATUS_SUCCESS)) {
- //
- // Undo everything if it failed
- //
+ /* */
+ /* Undo everything if it failed */
+ /* */
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
-// NdisMDeregisterInterrupt(&pAd->Interrupt);
+/* NdisMDeregisterInterrupt(&pAd->Interrupt); */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
-// RTMPFreeAdapter(pAd); // we will free it in disconnect()
+/* RTMPFreeAdapter(pAd); // we will free it in disconnect() */
} else if (pAd) {
- // Microsoft HCT require driver send a disconnect event after driver initialization.
+ /* Microsoft HCT require driver send a disconnect event after driver initialization. */
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-// pAd->IndicateMediaState = NdisMediaStateDisconnected;
+/* pAd->IndicateMediaState = NdisMediaStateDisconnected; */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
DBGPRINT(RT_DEBUG_TRACE,
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
- //
- // Support multiple BulkIn IRP,
- // the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
- //
+ /* */
+ /* Support multiple BulkIn IRP, */
+ /* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1. */
+ /* */
for (index = 0; index < pAd->CommonCfg.NumOfBulkInIRP; index++) {
RTUSBBulkReceive(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n"));
}
-#endif // RTMP_MAC_USB //
- } // end of else
+#endif /* RTMP_MAC_USB // */
+ } /* end of else */
- // Set up the Mac address
+ /* Set up the Mac address */
RtmpOSNetDevAddrSet(pAd->net_dev, &pAd->CurrentAddress[0]);
DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));
RTMPFreeTxRxRingMemory(pAd);
err1:
- os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool
+ os_free_mem(pAd, pAd->mpdu_blk_pool.mem); /* free BA pool */
- // shall not set priv to NULL here because the priv didn't been free yet.
- //net_dev->ml_priv = 0;
+ /* shall not set priv to NULL here because the priv didn't been free yet. */
+ /*net_dev->ml_priv = 0; */
#ifdef ST
err0:
-#endif // ST //
+#endif /* ST // */
DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
return FALSE;
}
-//---Add by shiang, move from os/linux/rt_main_dev.c
+/*---Add by shiang, move from os/linux/rt_main_dev.c */
static INT RtmpChipOpsRegister(IN RTMP_ADAPTER * pAd, IN INT infType)
{
pChipOps->eraseFirmware = RtmpAsicEraseFirmware;
pChipOps->sendCommandToMcu = RtmpAsicSendCommandToMcu;
break;
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
#ifdef RTMP_USB_SUPPORT
case RTMP_DEV_INF_USB:
pChipOps->loadFirmware = RtmpAsicLoadFirmware;
pChipOps->sendCommandToMcu = RtmpAsicSendCommandToMcu;
break;
-#endif // RTMP_USB_SUPPORT //
+#endif /* RTMP_USB_SUPPORT // */
default:
break;
}
INT RtmpRaDevCtrlInit(IN RTMP_ADAPTER * pAd, IN RTMP_INF_TYPE infType)
{
- //VOID *handle;
+ /*VOID *handle; */
- // Assign the interface type. We need use it when do register/EEPROM access.
+ /* Assign the interface type. We need use it when do register/EEPROM access. */
pAd->infType = infType;
pAd->OpMode = OPMODE_STA;
("Allocate vendor request temp buffer failed!\n"));
return FALSE;
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
RtmpChipOpsRegister(pAd, infType);
return TRUE;
}
-// not yet support MBSS
+/* not yet support MBSS */
PNET_DEV get_netdev_from_bssid(IN PRTMP_ADAPTER pAd, IN UCHAR FromWhichBSSID)
{
PNET_DEV dev_p = NULL;
#include <linux/bitrev.h>
-//#define BIN_IN_FILE /* use *.bin firmware */
-
#ifdef RTMP_MAC_USB
-//
-// RT2870 Firmware Spec only used 1 oct for version expression
-//
+/* */
+/* RT2870 Firmware Spec only used 1 oct for version expression */
+/* */
#define FIRMWARE_MINOR_VERSION 7
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
-// New 8k byte firmware size for RT3071/RT3072
+/* New 8k byte firmware size for RT3071/RT3072 */
#define FIRMWAREIMAGE_MAX_LENGTH 0x2000
#define FIRMWAREIMAGE_LENGTH (sizeof (FirmwareImage) / sizeof(UCHAR))
#define FIRMWARE_MAJOR_VERSION 0
#ifdef RTMP_MAC_PCI
#define FIRMWARE_MINOR_VERSION 2
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
/*
========================================================================
UINT32 Version = (pAd->MACVersion >> 16);
#endif
- // New 8k byte firmware size for RT3071/RT3072
+ /* New 8k byte firmware size for RT3071/RT3072 */
{
#ifdef RTMP_MAC_PCI
if (IS_RT3090(pAd) || IS_RT3390(pAd)) {
pFirmwareImage = FirmwareImage_2860;
FileLength = FIRMWAREIMAGE_MAX_LENGTH;
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
/* the firmware image consists of two parts */
if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070)) { /* use the second part */
- //printk("KH:Use New Version,part2\n");
+ /*printk("KH:Use New Version,part2\n"); */
pFirmwareImage =
(PUCHAR) &
FirmwareImage_3070[FIRMWAREIMAGEV1_LENGTH];
FileLength = FIRMWAREIMAGEV2_LENGTH;
} else {
- //printk("KH:Use New Version,part1\n");
+ /*printk("KH:Use New Version,part1\n"); */
if (Version == 0x3070)
pFirmwareImage = FirmwareImage_3070;
else
pFirmwareImage = FirmwareImage_2870;
FileLength = FIRMWAREIMAGEV1_LENGTH;
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
}
RTMP_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength);
ULONG i = 0;
#ifdef PCIE_PS_SUPPORT
- // 3090F power solution 3 has hw limitation that needs to ban all mcu command
- // when firmware is in radio state. For other chip doesn't have this limitation.
+ /* 3090F power solution 3 has hw limitation that needs to ban all mcu command */
+ /* when firmware is in radio state. For other chip doesn't have this limitation. */
if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
&& IS_VERSION_AFTER_F(pAd)) && IS_VERSION_AFTER_F(pAd)
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
return FALSE;
}
- H2MMailbox.field.Owner = 1; // pass ownership to MCU
+ H2MMailbox.field.Owner = 1; /* pass ownership to MCU */
H2MMailbox.field.CmdToken = Token;
H2MMailbox.field.HighByte = Arg1;
H2MMailbox.field.LowByte = Arg0;
RTMP_IO_FORCE_WRITE32(pAd, HOST_CMD_CSR, H2MCmd.word);
} else
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
{
do {
RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
if (i > 100) {
#ifdef RTMP_MAC_PCI
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
{
DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n"));
}
return FALSE;
}
#ifdef RTMP_MAC_PCI
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- H2MMailbox.field.Owner = 1; // pass ownership to MCU
+ H2MMailbox.field.Owner = 1; /* pass ownership to MCU */
H2MMailbox.field.CmdToken = Token;
H2MMailbox.field.HighByte = Arg1;
H2MMailbox.field.LowByte = Arg0;
}
}
#ifdef PCIE_PS_SUPPORT
- // 3090 MCU Wakeup command needs more time to be stable.
- // Before stable, don't issue other MCU command to prevent from firmware error.
+ /* 3090 MCU Wakeup command needs more time to be stable. */
+ /* Before stable, don't issue other MCU command to prevent from firmware error. */
if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
&& IS_VERSION_AFTER_F(pAd)) && IS_VERSION_AFTER_F(pAd)
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
&& (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
&& (Command == WAKE_MCU_CMD)) {
RTMPusecDelay(2000);
- //Put this is after RF programming.
- //NdisAcquireSpinLock(&pAd->McuCmdLock);
- //pAd->brt30xxBanMcuCmd = FALSE;
- //NdisReleaseSpinLock(&pAd->McuCmdLock);
+ /*Put this is after RF programming. */
+ /*NdisAcquireSpinLock(&pAd->McuCmdLock); */
+ /*pAd->brt30xxBanMcuCmd = FALSE; */
+ /*NdisReleaseSpinLock(&pAd->McuCmdLock); */
}
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
return TRUE;
}
#include "../rt_config.h"
BUILD_TIMER_FUNCTION(MlmePeriodicExec);
-//BUILD_TIMER_FUNCTION(MlmeRssiReportExec);
+/*BUILD_TIMER_FUNCTION(MlmeRssiReportExec); */
BUILD_TIMER_FUNCTION(AsicRxAntEvalTimeout);
BUILD_TIMER_FUNCTION(APSDPeriodicExec);
BUILD_TIMER_FUNCTION(AsicRfTuningExec);
#ifdef RTMP_MAC_USB
BUILD_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
BUILD_TIMER_FUNCTION(BeaconTimeout);
BUILD_TIMER_FUNCTION(ScanTimeout);
#ifdef RTMP_MAC_PCI
BUILD_TIMER_FUNCTION(PsPollWakeExec);
BUILD_TIMER_FUNCTION(RadioOnExec);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
BUILD_TIMER_FUNCTION(RtmpUsbStaAsicForceWakeupTimeout);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
#if defined(AP_LED) || defined(STA_LED)
extern void LedCtrlMain(IN PVOID SystemSpecific1,
if (pAd->TimerQ.status == RTMP_TASK_STAT_STOPED)
break;
- // event happened.
+ /* event happened. */
while (pAd->TimerQ.pQHead) {
RTMP_INT_LOCK(&pAd->TimerQLock, irqFlag);
pEntry = pAd->TimerQ.pQHead;
if (pEntry) {
pTimer = pEntry->pRaTimer;
- // update pQHead
+ /* update pQHead */
pAd->TimerQ.pQHead = pEntry->pNext;
if (pEntry == pAd->TimerQ.pQTail)
pAd->TimerQ.pQTail = NULL;
- // return this queue entry to timerQFreeList.
+ /* return this queue entry to timerQFreeList. */
pEntry->pNext = pAd->TimerQ.pQPollFreeList;
pAd->TimerQ.pQPollFreeList = pEntry;
}
pNode = pNode->pNext;
}
- // Now move it to freeList queue.
+ /* Now move it to freeList queue. */
if (pNode) {
if (pNode == pAd->TimerQ.pQHead)
pAd->TimerQ.pQHead = pNode->pNext;
if (pPrev != NULL)
pPrev->pNext = pNode->pNext;
- // return this queue entry to timerQFreeList.
+ /* return this queue entry to timerQFreeList. */
pNode->pNext = pAd->TimerQ.pQPollFreeList;
pAd->TimerQ.pQPollFreeList = pNode;
}
while (pAd->TimerQ.pQHead) {
pTimerQ = pAd->TimerQ.pQHead;
pAd->TimerQ.pQHead = pTimerQ->pNext;
- // remove the timeQ
+ /* remove the timeQ */
}
pAd->TimerQ.pQPollFreeList = NULL;
os_free_mem(pAd, pAd->TimerQ.pTimerQPoll);
RTMP_INT_UNLOCK(&pAd->TimerQLock, irqFlags);
}
}
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
{0, {0, 0, {0}
}
}
- , // Invlid entry
+ , /* Invlid entry */
{1, {4, 16, {36, 40, 44, 48}
}
}
{0, {0, 0, {0}
}
}
- , // Invalid entry
+ , /* Invalid entry */
{1, {4, 20, {36, 40, 44, 48}
}
}
{0, {0, 0, {0}
}
}
- , // Invalid entry
+ , /* Invalid entry */
{1, {4, 22, {34, 38, 42, 46}
}
}
PMEASURE_REQ_ENTRY pProbeEntry =
pTab->Hash[HashIdx];
- // update Hash list
+ /* update Hash list */
do {
if (pProbeEntry == pEntry) {
if (pPrevEntry == NULL) {
("%s: pMeasureReqTab tab full.\n", __func__));
}
- // add this Neighbor entry into HASH table
+ /* add this Neighbor entry into HASH table */
if (pEntry) {
HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(DialogToken);
if (pTab->Hash[HashIdx] == NULL) {
("%s: pMeasureReqTab doesn't exist.\n", __func__));
return;
}
- // if empty, return
+ /* if empty, return */
if (pTab->Size == 0) {
DBGPRINT(RT_DEBUG_ERROR, ("pMeasureReqTab empty.\n"));
return;
PMEASURE_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
RTMP_SEM_LOCK(&pAd->CommonCfg.MeasureReqTabLock);
- // update Hash list
+ /* update Hash list */
do {
if (pProbeEntry == pEntry) {
if (pPrevEntry == NULL) {
PTPC_REQ_ENTRY pProbeEntry =
pTab->Hash[HashIdx];
- // update Hash list
+ /* update Hash list */
do {
if (pProbeEntry == pEntry) {
if (pPrevEntry == NULL) {
("%s: pTpcReqTab tab full.\n", __func__));
}
- // add this Neighbor entry into HASH table
+ /* add this Neighbor entry into HASH table */
if (pEntry) {
HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(DialogToken);
if (pTab->Hash[HashIdx] == NULL) {
("%s: pTpcReqTab doesn't exist.\n", __func__));
return;
}
- // if empty, return
+ /* if empty, return */
if (pTab->Size == 0) {
DBGPRINT(RT_DEBUG_ERROR, ("pTpcReqTab empty.\n"));
return;
PTPC_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
RTMP_SEM_LOCK(&pAd->CommonCfg.TpcReqTabLock);
- // update Hash list
+ /* update Hash list */
do {
if (pProbeEntry == pEntry) {
if (pPrevEntry == NULL) {
*/
static UINT64 GetCurrentTimeStamp(IN PRTMP_ADAPTER pAd)
{
- // get current time stamp.
+ /* get current time stamp. */
return 0;
}
InsertActField(pAd, (pOutBuffer + *pFrameLen), pFrameLen, Category,
Action);
- // fill Dialog Token
+ /* fill Dialog Token */
InsertDialogToken(pAd, (pOutBuffer + *pFrameLen), pFrameLen,
MeasureToken);
*pFrameLen += TempLen;
}
- // prepare Measurement IE.
+ /* prepare Measurement IE. */
NdisZeroMemory(&MeasureReqIE, sizeof(MEASURE_REQ_INFO));
MeasureReqIE.Token = MeasureToken;
MeasureReqIE.ReqMode.word = MeasureReqMode;
HEADER_802_11 ActHdr;
MEASURE_REPORT_INFO MeasureRepIE;
- // build action frame header.
+ /* build action frame header. */
MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
pAd->CurrentAddress);
- NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("%s() allocate memory failed \n", __func__));
InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen,
CATEGORY_SPECTRUM, SPEC_MRP);
- // fill Dialog Token
+ /* fill Dialog Token */
InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
- // prepare Measurement IE.
+ /* prepare Measurement IE. */
NdisZeroMemory(&MeasureRepIE, sizeof(MEASURE_REPORT_INFO));
MeasureRepIE.Token = MeasureToken;
MeasureRepIE.ReportMode = MeasureReqMode;
HEADER_802_11 ActHdr;
- // build action frame header.
+ /* build action frame header. */
MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
pAd->CurrentAddress);
- NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("%s() allocate memory failed \n", __func__));
InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen,
CATEGORY_SPECTRUM, SPEC_TPCRQ);
- // fill Dialog Token
+ /* fill Dialog Token */
InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
- // Insert TPC Request IE.
+ /* Insert TPC Request IE. */
InsertTpcReqIE(pAd, (pOutBuffer + FrameLen), &FrameLen);
MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
HEADER_802_11 ActHdr;
- // build action frame header.
+ /* build action frame header. */
MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
pAd->CurrentAddress);
- NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("%s() allocate memory failed \n", __func__));
InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen,
CATEGORY_SPECTRUM, SPEC_TPCRP);
- // fill Dialog Token
+ /* fill Dialog Token */
InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
- // Insert TPC Request IE.
+ /* Insert TPC Request IE. */
InsertTpcReportIE(pAd, (pOutBuffer + FrameLen), &FrameLen, TxPwr,
LinkMargin);
HEADER_802_11 ActHdr;
- // build action frame header.
+ /* build action frame header. */
MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
pAd->CurrentAddress);
- NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("%s() allocate memory failed \n", __func__));
INT i;
do {
- // check DFS procedure is running.
- // make sure DFS procedure won't start twice.
+ /* check DFS procedure is running. */
+ /* make sure DFS procedure won't start twice. */
if (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE) {
Result = FALSE;
break;
}
- // check the new channel carried from Channel Switch Announcemnet is valid.
+ /* check the new channel carried from Channel Switch Announcemnet is valid. */
for (i = 0; i < pAd->ChannelListNum; i++) {
if ((Channel == pAd->ChannelList[i].Channel)
&& (pAd->ChannelList[i].RemainingTimeForUse == 0)) {
- // found radar signal in the channel. the channel can't use at least for 30 minutes.
- pAd->ChannelList[i].RemainingTimeForUse = 1800; //30 min = 1800 sec
+ /* found radar signal in the channel. the channel can't use at least for 30 minutes. */
+ pAd->ChannelList[i].RemainingTimeForUse = 1800; /*30 min = 1800 sec */
Result = TRUE;
break;
}
static VOID StartDFSProcedure(IN PRTMP_ADAPTER pAd,
IN UCHAR Channel, IN UINT8 ChSwMode)
{
- // start DFS procedure
+ /* start DFS procedure */
pAd->CommonCfg.Channel = Channel;
N_ChannelCheck(pAd);
BOOLEAN result = FALSE;
PEID_STRUCT eid_ptr;
- // skip 802.11 header.
+ /* skip 802.11 header. */
MsgLen -= sizeof(HEADER_802_11);
- // skip category and action code.
+ /* skip category and action code. */
pFramePtr += 2;
MsgLen -= 2;
UINT64 MeasureStartTime;
UINT16 MeasureDuration;
- // skip 802.11 header.
+ /* skip 802.11 header. */
MsgLen -= sizeof(HEADER_802_11);
- // skip category and action code.
+ /* skip category and action code. */
pFramePtr += 2;
MsgLen -= 2;
PEID_STRUCT eid_ptr;
PUCHAR ptr;
- // skip 802.11 header.
+ /* skip 802.11 header. */
MsgLen -= sizeof(HEADER_802_11);
- // skip category and action code.
+ /* skip category and action code. */
pFramePtr += 2;
MsgLen -= 2;
MsgLen -= sizeof(HEADER_802_11);
- // skip category and action code.
+ /* skip category and action code. */
pFramePtr += 2;
MsgLen -= 2;
MsgLen -= sizeof(HEADER_802_11);
- // skip category and action code.
+ /* skip category and action code. */
pFramePtr += 2;
MsgLen -= 2;
if ((pAd->CommonCfg.bIEEE80211H == 1) && (NewChannel != 0)
&& (Channel != NewChannel)) {
- // Switching to channel 1 can prevent from rescanning the current channel immediately (by auto reconnection).
- // In addition, clear the MLME queue and the scan table to discard the RX packets and previous scanning results.
+ /* Switching to channel 1 can prevent from rescanning the current channel immediately (by auto reconnection). */
+ /* In addition, clear the MLME queue and the scan table to discard the RX packets and previous scanning results. */
AsicSwitchChannel(pAd, 1, FALSE);
AsicLockChannel(pAd, 1);
LinkDown(pAd, FALSE);
MlmeQueueInit(&pAd->Mlme.Queue);
BssTableInit(&pAd->ScanTab);
- RTMPusecDelay(1000000); // use delay to prevent STA do reassoc
+ RTMPusecDelay(1000000); /* use delay to prevent STA do reassoc */
- // channel sanity check
+ /* channel sanity check */
for (index = 0; index < pAd->ChannelListNum; index++) {
if (pAd->ChannelList[index].Channel ==
NewChannel) {
UINT8 DialogToken;
PUINT8 pMeasureReportInfo;
-// if (pAd->CommonCfg.bIEEE80211H != TRUE)
-// return;
+/* if (pAd->CommonCfg.bIEEE80211H != TRUE) */
+/* return; */
if ((pMeasureReportInfo =
kmalloc(sizeof(MEASURE_RPI_REPORT), GFP_ATOMIC)) == NULL) {
do {
PMEASURE_REQ_ENTRY pEntry = NULL;
- // Not a autonomous measure report.
- // check the dialog token field. drop it if the dialog token doesn't match.
+ /* Not a autonomous measure report. */
+ /* check the dialog token field. drop it if the dialog token doesn't match. */
if ((DialogToken != 0)
&& ((pEntry = MeasureReqLookUp(pAd, DialogToken)) ==
NULL))
UINT8 LinkMargin = 0;
CHAR RealRssi;
- // link margin: Ratio of the received signal power to the minimum desired by the station (STA). The
- // STA may incorporate rate information and channel conditions, including interference, into its computation
- // of link margin.
+ /* link margin: Ratio of the received signal power to the minimum desired by the station (STA). The */
+ /* STA may incorporate rate information and channel conditions, including interference, into its computation */
+ /* of link margin. */
RealRssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0),
ConvertToRssi(pAd, Elem->Rssi1, RSSI_1),
ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
- // skip Category and action code.
+ /* skip Category and action code. */
pFramePtr += 2;
- // Dialog token.
+ /* Dialog token. */
NdisMoveMemory(&DialogToken, pFramePtr, 1);
LinkMargin = (RealRssi / MIN_RCV_PWR);
switch (Action) {
case SPEC_MRQ:
- // current rt2860 unable do such measure specified in Measurement Request.
- // reject all measurement request.
+ /* current rt2860 unable do such measure specified in Measurement Request. */
+ /* reject all measurement request. */
PeerMeasureReqAction(pAd, Elem);
break;
NDIS_STATUS NStatus;
ULONG FrameLen;
- NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); //Get an unused nonpaged memory
+ NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS) {
DBGPRINT(RT_DEBUG_TRACE,
("%s() allocate memory failed \n", __func__));
ArgIdx = 1;
while ((thisChar = strsep((char **)&arg, "-")) != NULL) {
switch (ArgIdx) {
- case 1: // Aid.
+ case 1: /* Aid. */
Aid = (UINT8) simple_strtol(thisChar, 0, 16);
break;
- case 2: // Measurement Request Type.
+ case 2: /* Measurement Request Type. */
MeasureReqType = simple_strtol(thisChar, 0, 16);
if (MeasureReqType > 3) {
DBGPRINT(RT_DEBUG_ERROR,
}
break;
- case 3: // Measurement channel.
+ case 3: /* Measurement channel. */
MeasureCh = (UINT8) simple_strtol(thisChar, 0, 16);
break;
}
MeasureReqInsert(pAd, MeasureReqToken);
- // build action frame header.
+ /* build action frame header. */
MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0,
pAd->MacTab.Content[Aid].Addr, pAd->CurrentAddress);
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff