arm64: dts: add LS1043a-QDS board support

The LS1043a-QDS board is a high-performance computing, evaluation,
development, and test platform supporting the LS1043a SoC.

shawn.guo: sort the entries in Makefile alphabetcially

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index f3c25165dad33652958aa608c97dbe45e1c0923c..1b7783db7de48349e6227580ab7468946f676a5d 100644 (file)
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,7 +1,8 @@
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
-dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
  
 always         := $(dtb-y)
 subdir-y       := $(dts-dirs)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
new file mode 100644 (file)
index 0000000..80688ac
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -0,0 +1,168 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+       model = "LS1043A QDS Board";
+       compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
+
+       aliases {
+               gpio0 = &gpio1;
+               gpio1 = &gpio2;
+               gpio2 = &gpio3;
+               gpio3 = &gpio4;
+               serial0 = &lpuart0;
+               serial1 = &lpuart1;
+               serial2 = &lpuart2;
+               serial3 = &lpuart3;
+               serial4 = &lpuart4;
+               serial5 = &lpuart5;
+       };
+};
+
+&duart0 {
+       status = "okay";
+};
+
+&duart1 {
+       status = "okay";
+};
+
+&ifc {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       /* NOR, NAND Flashes and FPGA on board */
+       ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+                 0x1 0x0 0x0 0x7e800000 0x00010000
+                 0x2 0x0 0x0 0x7fb00000 0x00000100>;
+       status = "okay";
+
+       nor@0,0 {
+               compatible = "cfi-flash";
+               reg = <0x0 0x0 0x8000000>;
+               bank-width = <2>;
+               device-width = <1>;
+       };
+
+       nand@1,0 {
+               compatible = "fsl,ifc-nand";
+               reg = <0x1 0x0 0x10000>;
+       };
+
+       fpga: board-control@2,0 {
+               compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
+               reg = <0x2 0x0 0x0000100>;
+       };
+};
+
+&i2c0 {
+       status = "okay";
+
+       pca9547@77 {
+               compatible = "nxp,pca9547";
+               reg = <0x77>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x0>;
+
+                       rtc@68 {
+                               compatible = "dallas,ds3232";
+                               reg = <0x68>;
+                               /* IRQ10_B */
+                               interrupts = <0 150 0x4>;
+                       };
+               };
+
+               i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x2>;
+
+                       ina220@40 {
+                               compatible = "ti,ina220";
+                               reg = <0x40>;
+                               shunt-resistor = <1000>;
+                       };
+
+                       ina220@41 {
+                               compatible = "ti,ina220";
+                               reg = <0x41>;
+                               shunt-resistor = <1000>;
+                       };
+               };
+
+               i2c@3 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x3>;
+
+                       eeprom@56 {
+                               compatible = "atmel,24c512";
+                               reg = <0x56>;
+                       };
+
+                       eeprom@57 {
+                               compatible = "atmel,24c512";
+                               reg = <0x57>;
+                       };
+
+                       temp-sensor@4c {
+                               compatible = "adi,adt7461a";
+                               reg = <0x4c>;
+                       };
+               };
+       };
+};
+
+&lpuart0 {
+       status = "okay";
+};