net: bcmgenet: set RBUF_SKIP_FCS based on UniMAC CRC forwarding
authorFlorian Fainelli <f.fainelli@gmail.com>
Thu, 27 Mar 2014 04:18:39 +0000 (21:18 -0700)
committerDavid S. Miller <davem@davemloft.net>
Thu, 27 Mar 2014 19:49:42 +0000 (15:49 -0400)
When the UniMAC block is configured to forward the CRC as part of the
Ethernet frame (priv->crc_fwd_en, set by default), enabling the hardware
RX checksum block unveiled that the dma_rxchk_bit was never set in the
per-packet status bits (dma_flag in bcmgenet_desc_rx). This would make
the chksum_ok variable to be never set to 1, and the networking stack
would have to compute the packet checksums, which takes a substantial
amount of time.

In order for the RXCHK block to properly compute the packet checksum in
hardware, we also need to set the RBUF_SKIP_FCS bit accordingly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/genet/bcmgenet.c

index 8f87fe001541d521e1094269f09575d96425e87b..adf8acbddf56c1ec64905a4226e558e829684b91 100644 (file)
@@ -416,6 +416,15 @@ static int bcmgenet_set_rx_csum(struct net_device *dev,
        else
                rbuf_chk_ctrl &= ~RBUF_RXCHK_EN;
        priv->desc_rxchk_en = rx_csum_en;
+
+       /* If UniMAC forwards CRC, we need to skip over it to get
+        * a valid CHK bit to be set in the per-packet status word
+       */
+       if (rx_csum_en && priv->crc_fwd_en)
+               rbuf_chk_ctrl |= RBUF_SKIP_FCS;
+       else
+               rbuf_chk_ctrl &= ~RBUF_SKIP_FCS;
+
        bcmgenet_rbuf_writel(priv, rbuf_chk_ctrl, RBUF_CHK_CTRL);
 
        return 0;