/*This list is protected by the rtnl lock. */
static LIST_HEAD(ser_list);
-static int ser_loop;
+static bool ser_loop;
module_param(ser_loop, bool, S_IRUGO);
MODULE_PARM_DESC(ser_loop, "Run in simulated loopback mode.");
-static int ser_use_stx = 1;
+static bool ser_use_stx = true;
module_param(ser_use_stx, bool, S_IRUGO);
MODULE_PARM_DESC(ser_use_stx, "STX enabled or not.");
-static int ser_use_fcs = 1;
+static bool ser_use_fcs = true;
module_param(ser_use_fcs, bool, S_IRUGO);
MODULE_PARM_DESC(ser_use_fcs, "FCS enabled or not.");
/* Returns the number of padding bytes for alignment. */
#define PAD_POW2(x, pow) ((((x)&((pow)-1))==0) ? 0 : (((pow)-((x)&((pow)-1)))))
-static int spi_loop;
+static bool spi_loop;
module_param(spi_loop, bool, S_IRUGO);
MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode.");
* See Documentation/networking/can.txt for details.
*/
-static int echo; /* echo testing. Default: 0 (Off) */
+static bool echo; /* echo testing. Default: 0 (Off) */
module_param(echo, bool, S_IRUGO);
MODULE_PARM_DESC(echo, "Echo sent frames (for testing). Default: 0 (Off)");
static int card_idx;
static int speed_duplex[MAX_UNITS] = { 0, };
-static int coalesce[MAX_UNITS] = {1,1,1,1,1,1,1,1};
-static int dynamic_ipg[MAX_UNITS] = {0,0,0,0,0,0,0,0};
+static bool coalesce[MAX_UNITS] = { [ 0 ... MAX_UNITS-1] = true };
+static bool dynamic_ipg[MAX_UNITS] = { [ 0 ... MAX_UNITS-1] = false };
static unsigned int chip_version;
#endif /* _AMD8111E_H */
MODULE_PARM_DESC(intr_cnt,
"thresholds 1..3 for queue interrupt packet counters");
-static int vf_acls;
+static bool vf_acls;
#ifdef CONFIG_PCI_IOV
module_param(vf_acls, bool, 0644);
#include "de600.h"
-static unsigned int check_lost = 1;
+static bool check_lost = true;
module_param(check_lost, bool, 0);
MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600");
extern void __buggy_use_of_MLX4_GET(void);
extern void __buggy_use_of_MLX4_PUT(void);
-static int enable_qos;
+static bool enable_qos;
module_param(enable_qos, bool, 0444);
MODULE_PARM_DESC(enable_qos, "Enable Quality of Service support in the HCA (default: off)");
/* Log2 max number of VLANs per ETH port (0-7) */
#define MLX4_LOG_NUM_VLANS 7
-static int use_prio;
+static bool use_prio;
module_param_named(use_prio, use_prio, bool, 0444);
MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports "
"(0/1, default 0)");
#define DRV_VERSION "1.5.0"
#define DRV_RELDATE "2010-10-09"
+#include <linux/types.h>
/* A few user-configurable values.
These may be modified when a driver module is loaded. */
/* Work-around for broken BIOSes: they are unable to get the chip back out of
power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
-static int avoid_D3;
+static bool avoid_D3;
/*
* In case you are looking for 'options[]' or 'full_duplex[]', they
#endif
if (dmi_check_system(rhine_dmi_table)) {
/* these BIOSes fail at PXE boot if chip is in D3 */
- avoid_D3 = 1;
+ avoid_D3 = true;
pr_warn("Broken BIOS detected, avoid_D3 enabled\n");
}
else if (avoid_D3)
static int max_baud = 4000000;
#ifdef USE_PROBE
-static int do_probe = 0;
+static bool do_probe = false;
#endif
MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
MODULE_LICENSE("GPL");
-static int smsc_nopnp = 1;
+static bool smsc_nopnp = true;
module_param_named(nopnp, smsc_nopnp, bool, 0);
MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings, defaults to true");
#define BMSR_MEDIA (BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | \
BMSR_100FULL | BMSR_ANEGCAPABLE)
-static int loopback;
-static int mii_mode;
+static bool loopback;
+static bool mii_mode;
static char *devid;
static struct usb_eth_dev usb_dev_id[] = {
struct usbnet *dev;
};
-static int turbo_mode = true;
+static bool turbo_mode = true;
module_param(turbo_mode, bool, 0644);
MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
struct usbnet *dev;
};
-static int turbo_mode = true;
+static bool turbo_mode = true;
module_param(turbo_mode, bool, 0644);
MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
static int napi_weight = 128;
module_param(napi_weight, int, 0444);
-static int csum = 1, gso = 1;
+static bool csum = true, gso = true;
module_param(csum, bool, 0444);
module_param(gso, bool, 0444);
static const char version[] =
"Granch SBNI12 driver ver 5.0.1 Jun 22 2001 Denis I.Timofeev.\n";
-static int skip_pci_probe __initdata = 0;
+static bool skip_pci_probe __initdata = false;
static int scandone __initdata = 0;
static int num __initdata = 0;
static int txdma=1;
static int rxdma=3;
static int irq=5;
-static int slow=0;
+static bool slow=false;
module_param(io, int, 0);
MODULE_PARM_DESC(io, "The I/O base of the Sealevel card");
*/
#define AR5K_KEYCACHE_SIZE 8
-extern int ath5k_modparam_nohwcrypt;
+extern bool ath5k_modparam_nohwcrypt;
/***********************\
HW RELATED DEFINITIONS
#define CREATE_TRACE_POINTS
#include "trace.h"
-int ath5k_modparam_nohwcrypt;
+bool ath5k_modparam_nohwcrypt;
module_param_named(nohwcrypt, ath5k_modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-static int modparam_all_channels;
+static bool modparam_all_channels;
module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
-static int modparam_fastchanswitch;
+static bool modparam_fastchanswitch;
module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
#include "carl9170.h"
#include "cmd.h"
-static int modparam_nohwcrypt;
+static bool modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware crypto offload.");
.mac_addr = {0x00, 0x02, 0xb3, 0x01, 0x02, 0x03},
};
-static int modparam_reset;
+static bool modparam_reset;
module_param_named(reset, modparam_reset, bool, 0644);
MODULE_PARM_DESC(reset, "reset on firmware errors (default 0 [not reset])");
-static int modparam_wimax_enable = 1;
+static bool modparam_wimax_enable = true;
module_param_named(wimax_enable, modparam_wimax_enable, bool, 0644);
MODULE_PARM_DESC(wimax_enable, "Enable wimax core (default 1 [wimax enabled])");
#define MWL8K_VERSION "0.12"
/* Module parameters */
-static unsigned ap_mode_default;
+static bool ap_mode_default;
module_param(ap_mode_default, bool, 0);
MODULE_PARM_DESC(ap_mode_default,
"Set to 1 to make ap mode the default instead of sta mode");
MODULE_PARM_DESC(orinoco_debug, "Debug level");
#endif
-static int suppress_linkstatus; /* = 0 */
+static bool suppress_linkstatus; /* = 0 */
module_param(suppress_linkstatus, bool, 0644);
MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
#include "p54.h"
#include "lmac.h"
-static int modparam_nohwcrypt;
+static bool modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
/*
* Allow hardware encryption to be disabled.
*/
-static int modparam_nohwcrypt;
+static bool modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
/*
* Allow hardware encryption to be disabled.
*/
-static int modparam_nohwcrypt = 0;
+static bool modparam_nohwcrypt = false;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
/*
* Allow hardware encryption to be disabled.
*/
-static int modparam_nohwcrypt;
+static bool modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
/*
* Allow hardware encryption to be disabled.
*/
-static int modparam_nohwcrypt = 0;
+static bool modparam_nohwcrypt = false;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
/*
* Allow hardware encryption to be disabled.
*/
-static int modparam_nohwcrypt;
+static bool modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
struct rtl_mod_params {
/* default: 0 = using hardware encryption */
- int sw_crypto;
+ bool sw_crypto;
/* default: 0 = DBG_EMERG (0)*/
int debug;
return L2CAP_ENH_HDR_SIZE - L2CAP_HDR_SIZE;
}
-extern int disable_ertm;
+extern bool disable_ertm;
int l2cap_init_sockets(void);
void l2cap_cleanup_sockets(void);
/* Flag to indicate whether computing and verifying checksum
* is disabled. */
- int checksum_disable;
+ bool checksum_disable;
/* Threshold for rwnd update SACKS. Receive buffer shifted this many
* bits is an indicator of when to send and window update SACK.
#define VERSION "1.3"
-static int compress_src = 1;
-static int compress_dst = 1;
+static bool compress_src = true;
+static bool compress_dst = true;
static LIST_HEAD(bnep_session_list);
static DECLARE_RWSEM(bnep_session_sem);
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
-static int enable_le;
+static bool enable_le;
/* Handle HCI Event packets */
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
-static int enable_mgmt;
+static bool enable_mgmt;
/* ----- HCI socket interface ----- */
#include <net/bluetooth/l2cap.h>
#include <net/bluetooth/smp.h>
-int disable_ertm;
+bool disable_ertm;
static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN;
static u8 l2cap_fixed_chan[8] = { L2CAP_FC_L2CAP, };
#define VERSION "1.11"
-static int disable_cfc;
-static int l2cap_ertm;
+static bool disable_cfc;
+static bool l2cap_ertm;
static int channel_mtu = -1;
static unsigned int l2cap_mtu = RFCOMM_MAX_L2CAP_MTU;
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/sco.h>
-static int disable_esco;
+static bool disable_esco;
static const struct proto_ops sco_sock_ops;
#ifdef CONFIG_IP_DCCP_CCID2_DEBUG
-static int ccid2_debug;
+static bool ccid2_debug;
#define ccid2_pr_debug(format, a...) DCCP_PR_DEBUG(ccid2_debug, format, ##a)
#else
#define ccid2_pr_debug(format, a...)
/*
* Congestion window validation (RFC 2861).
*/
-static int ccid2_do_cwv = 1;
+static bool ccid2_do_cwv = true;
module_param(ccid2_do_cwv, bool, 0644);
MODULE_PARM_DESC(ccid2_do_cwv, "Perform RFC2861 Congestion Window Validation");
#include <asm/unaligned.h>
#ifdef CONFIG_IP_DCCP_CCID3_DEBUG
-static int ccid3_debug;
+static bool ccid3_debug;
#define ccid3_pr_debug(format, a...) DCCP_PR_DEBUG(ccid3_debug, format, ##a)
#else
#define ccid3_pr_debug(format, a...)
#include "tfrc.h"
#ifdef CONFIG_IP_DCCP_TFRC_DEBUG
-int tfrc_debug;
+bool tfrc_debug;
module_param(tfrc_debug, bool, 0644);
MODULE_PARM_DESC(tfrc_debug, "Enable TFRC debug messages");
#endif
#include "packet_history.h"
#ifdef CONFIG_IP_DCCP_TFRC_DEBUG
-extern int tfrc_debug;
+extern bool tfrc_debug;
#define tfrc_pr_debug(format, a...) DCCP_PR_DEBUG(tfrc_debug, format, ##a)
#else
#define tfrc_pr_debug(format, a...)
"%s: " fmt, __func__, ##a)
#ifdef CONFIG_IP_DCCP_DEBUG
-extern int dccp_debug;
+extern bool dccp_debug;
#define dccp_pr_debug(format, a...) DCCP_PR_DEBUG(dccp_debug, format, ##a)
#define dccp_pr_debug_cat(format, a...) DCCP_PRINTK(dccp_debug, format, ##a)
#define dccp_debug(fmt, a...) dccp_pr_debug_cat(KERN_DEBUG fmt, ##a)
MODULE_PARM_DESC(thash_entries, "Number of ehash buckets");
#ifdef CONFIG_IP_DCCP_DEBUG
-int dccp_debug;
+bool dccp_debug;
module_param(dccp_debug, bool, 0644);
MODULE_PARM_DESC(dccp_debug, "Enable debug messages");
module_param(flushtimeout, uint, 0600);
MODULE_PARM_DESC(flushtimeout, "buffer flush timeout (hundredths of a second)");
-static int nflog = 1;
+static bool nflog = true;
module_param(nflog, bool, 0400);
MODULE_PARM_DESC(nflog, "register as internal netfilter logging module");
static struct nf_hook_ops *filter_ops __read_mostly;
/* Default to forward because I got too much mail already. */
-static int forward = NF_ACCEPT;
+static bool forward = NF_ACCEPT;
module_param(forward, bool, 0000);
static int __net_init iptable_filter_net_init(struct net *net)
static struct nf_hook_ops *filter_ops __read_mostly;
/* Default to forward because I got too much mail already. */
-static int forward = NF_ACCEPT;
+static bool forward = NF_ACCEPT;
module_param(forward, bool, 0000);
static int __net_init ip6table_filter_net_init(struct net *net)
static void *skey;
/* Module parameters */
-static int eth; /* Use "eth" or "irlan" name for devices */
+static bool eth; /* Use "eth" or "irlan" name for devices */
static int access = ACCESS_PEER; /* PEER, DIRECT or HOSTED */
#ifdef CONFIG_PROC_FS
#include <net/netfilter/nf_conntrack_extend.h>
#include <net/netfilter/nf_conntrack_acct.h>
-static int nf_ct_acct __read_mostly;
+static bool nf_ct_acct __read_mostly;
module_param_named(acct, nf_ct_acct, bool, 0644);
MODULE_PARM_DESC(acct, "Enable connection tracking flow accounting.");
static unsigned int ports_c;
module_param_array(ports, ushort, &ports_c, 0400);
-static int loose;
+static bool loose;
module_param(loose, bool, 0600);
unsigned int (*nf_nat_ftp_hook)(struct sk_buff *skb,
module_param(gkrouted_only, int, 0600);
MODULE_PARM_DESC(gkrouted_only, "only accept calls from gatekeeper");
-static int callforward_filter __read_mostly = 1;
+static bool callforward_filter __read_mostly = true;
module_param(callforward_filter, bool, 0600);
MODULE_PARM_DESC(callforward_filter, "only create call forwarding expectations "
"if both endpoints are on different sides "
#include <net/netfilter/nf_conntrack_extend.h>
#include <net/netfilter/nf_conntrack_timestamp.h>
-static int nf_ct_tstamp __read_mostly;
+static bool nf_ct_tstamp __read_mostly;
module_param_named(tstamp, nf_ct_tstamp, bool, 0644);
MODULE_PARM_DESC(tstamp, "Enable connection tracking flow timestamping.");