ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260

Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
	genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)

The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both.  Arbitrarily choose level high
everywhere hoping it will work on each platform.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>

diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index a86a4898d077ffca3050e4dc0cc90971e64453fb..b0848a3d3d88f96f4f88a2114da2c4d3d9f0b9d2 100644 (file)
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -10,6 +10,7 @@
 */
 
 #include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
        compatible = "samsung,exynos5260", "samsung,exynos5";
@@ -181,10 +182,18 @@
                        reg = <0x100B0000 0x1000>;
                        clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
                        clock-names = "fin_pll", "mct";
-                       interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-                                       <0 107 0>, <0 122 0>, <0 123 0>,
-                                       <0 124 0>, <0 125 0>, <0 126 0>,
-                                       <0 127 0>, <0 128 0>, <0 129 0>;
+                       interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 105 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 106 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 107 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 122 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 123 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 124 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 125 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 126 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 127 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 128 IRQ_TYPE_LEVEL_HIGH>,
+                                    <0 129 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                cci: cci@10F00000 {
@@ -210,25 +219,25 @@
                pinctrl_0: pinctrl@11600000 {
                        compatible = "samsung,exynos5260-pinctrl";
                        reg = <0x11600000 0x1000>;
-                       interrupts = <0 79 0>;
+                       interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
 
                        wakeup-interrupt-controller {
                                compatible = "samsung,exynos4210-wakeup-eint";
                                interrupt-parent = <&gic>;
-                               interrupts = <0 32 0>;
+                               interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
                        };
                };
 
                pinctrl_1: pinctrl@12290000 {
                        compatible = "samsung,exynos5260-pinctrl";
                        reg = <0x12290000 0x1000>;
-                       interrupts = <0 157 0>;
+                       interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                pinctrl_2: pinctrl@128B0000 {
                        compatible = "samsung,exynos5260-pinctrl";
                        reg = <0x128B0000 0x1000>;
-                       interrupts = <0 243 0>;
+                       interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                pmu_system_controller: system-controller@10D50000 {
@@ -239,7 +248,7 @@
                uart0: serial@12C00000 {
                        compatible = "samsung,exynos4210-uart";
                        reg = <0x12C00000 0x100>;
-                       interrupts = <0 146 0>;
+                       interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
                        clock-names = "uart", "clk_uart_baud0";
                        status = "disabled";
@@ -248,7 +257,7 @@
                uart1: serial@12C10000 {
                        compatible = "samsung,exynos4210-uart";
                        reg = <0x12C10000 0x100>;
-                       interrupts = <0 147 0>;
+                       interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
                        clock-names = "uart", "clk_uart_baud0";
                        status = "disabled";
@@ -257,7 +266,7 @@
                uart2: serial@12C20000 {
                        compatible = "samsung,exynos4210-uart";
                        reg = <0x12C20000 0x100>;
-                       interrupts = <0 148 0>;
+                       interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
                        clock-names = "uart", "clk_uart_baud0";
                        status = "disabled";
@@ -266,7 +275,7 @@
                uart3: serial@12860000 {
                        compatible = "samsung,exynos4210-uart";
                        reg = <0x12860000 0x100>;
-                       interrupts = <0 145 0>;
+                       interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
                        clock-names = "uart", "clk_uart_baud0";
                        status = "disabled";
@@ -275,7 +284,7 @@
                mmc_0: mmc@12140000 {
                        compatible = "samsung,exynos5250-dw-mshc";
                        reg = <0x12140000 0x2000>;
-                       interrupts = <0 156 0>;
+                       interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -287,7 +296,7 @@
                mmc_1: mmc@12150000 {
                        compatible = "samsung,exynos5250-dw-mshc";
                        reg = <0x12150000 0x2000>;
-                       interrupts = <0 158 0>;
+                       interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -299,7 +308,7 @@
                mmc_2: mmc@12160000 {
                        compatible = "samsung,exynos5250-dw-mshc";
                        reg = <0x12160000 0x2000>;
-                       interrupts = <0 159 0>;
+                       interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;