sdio: extend sdio_readsb() and friends to handle any length of buffer

Extend sdio_readsb(), sdio_writesb(), sdio_memcpy_fromio(), and
sdio_memcpy_toio() to handle any length of buffer by splitting the transfer
into several IO_RW_EXTENDED commands. Typically, a transfer would be split
into a single block mode transfer followed by a byte mode transfer for the
remainder but we also handle lack of block mode support and the block size
being greater than 512 (the maximum byte mode transfer size).

host->max_seg_size <= host->max_req_size so there's no need to check both
when determining the maximum data size for a single command.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index c2bad1195e3bffa8a1045f11d5a3d65a543e2cce..34b085d4024afe4067862785cd63aee1269f3df1 100644 (file)
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -189,6 +189,67 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz)
 
 EXPORT_SYMBOL_GPL(sdio_set_block_size);
 
+/* Split an arbitrarily sized data transfer into several
+ * IO_RW_EXTENDED commands. */
+static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
+       unsigned addr, int incr_addr, u8 *buf, unsigned size)
+{
+       unsigned remainder = size;
+       unsigned max_blocks;
+       int ret;
+
+       /* Do the bulk of the transfer using block mode (if supported). */
+       if (func->card->cccr.multi_block) {
+               /* Blocks per command is limited by host count, host transfer
+                * size (we only use a single sg entry) and the maximum for
+                * IO_RW_EXTENDED of 511 blocks. */
+               max_blocks = min(min(
+                       func->card->host->max_blk_count,
+                       func->card->host->max_seg_size / func->cur_blksize),
+                       511u);
+
+               while (remainder > func->cur_blksize) {
+                       unsigned blocks;
+
+                       blocks = remainder / func->cur_blksize;
+                       if (blocks > max_blocks)
+                               blocks = max_blocks;
+                       size = blocks * func->cur_blksize;
+
+                       ret = mmc_io_rw_extended(func->card, write,
+                               func->num, addr, incr_addr, buf,
+                               blocks, func->cur_blksize);
+                       if (ret)
+                               return ret;
+
+                       remainder -= size;
+                       buf += size;
+                       if (incr_addr)
+                               addr += size;
+               }
+       }
+
+       /* Write the remainder using byte mode. */
+       while (remainder > 0) {
+               size = remainder;
+               if (size > func->cur_blksize)
+                       size = func->cur_blksize;
+               if (size > 512)
+                       size = 512; /* maximum size for byte mode */
+
+               ret = mmc_io_rw_extended(func->card, write, func->num, addr,
+                        incr_addr, buf, 1, size);
+               if (ret)
+                       return ret;
+
+               remainder -= size;
+               buf += size;
+               if (incr_addr)
+                       addr += size;
+       }
+       return 0;
+}
+
 /**
  *     sdio_readb - read a single byte from a SDIO function
  *     @func: SDIO function to access
@@ -252,15 +313,13 @@ EXPORT_SYMBOL_GPL(sdio_writeb);
  *     @addr: address to begin reading from
  *     @count: number of bytes to read
  *
- *     Reads up to 512 bytes from the address space of a given SDIO
- *     function. Return value indicates if the transfer succeeded or
- *     not.
+ *     Reads from the address space of a given SDIO function. Return
+ *     value indicates if the transfer succeeded or not.
  */
 int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
        unsigned int addr, int count)
 {
-       return mmc_io_rw_extended(func->card, 0, func->num, addr, 0, dst,
-               count);
+       return sdio_io_rw_ext_helper(func, 0, addr, 1, dst, count);
 }
 EXPORT_SYMBOL_GPL(sdio_memcpy_fromio);
 
@@ -271,15 +330,13 @@ EXPORT_SYMBOL_GPL(sdio_memcpy_fromio);
  *     @src: buffer that contains the data to write
  *     @count: number of bytes to write
  *
- *     Writes up to 512 bytes to the address space of a given SDIO
- *     function. Return value indicates if the transfer succeeded or
- *     not.
+ *     Writes to the address space of a given SDIO function. Return
+ *     value indicates if the transfer succeeded or not.
  */
 int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
        void *src, int count)
 {
-       return mmc_io_rw_extended(func->card, 1, func->num, addr, 0, src,
-               count);
+       return sdio_io_rw_ext_helper(func, 1, addr, 1, src, count);
 }
 EXPORT_SYMBOL_GPL(sdio_memcpy_toio);
 
@@ -290,15 +347,13 @@ EXPORT_SYMBOL_GPL(sdio_memcpy_toio);
  *     @addr: address of (single byte) FIFO
  *     @count: number of bytes to read
  *
- *     Reads up to 512 bytes from the specified FIFO of a given SDIO
- *     function. Return value indicates if the transfer succeeded or
- *     not.
+ *     Reads from the specified FIFO of a given SDIO function. Return
+ *     value indicates if the transfer succeeded or not.
  */
 int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr,
        int count)
 {
-       return mmc_io_rw_extended(func->card, 0, func->num, addr, 1, dst,
-               count);
+       return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count);
 }
 
 EXPORT_SYMBOL_GPL(sdio_readsb);
@@ -310,15 +365,13 @@ EXPORT_SYMBOL_GPL(sdio_readsb);
  *     @src: buffer that contains the data to write
  *     @count: number of bytes to write
  *
- *     Writes up to 512 bytes to the specified FIFO of a given SDIO
- *     function. Return value indicates if the transfer succeeded or
- *     not.
+ *     Writes to the specified FIFO of a given SDIO function. Return
+ *     value indicates if the transfer succeeded or not.
  */
 int sdio_writesb(struct sdio_func *func, unsigned int addr, void *src,
        int count)
 {
-       return mmc_io_rw_extended(func->card, 1, func->num, addr, 1, src,
-               count);
+       return sdio_io_rw_ext_helper(func, 1, addr, 0, src, count);
 }
 EXPORT_SYMBOL_GPL(sdio_writesb);
 

diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
index 4f2c771394777365f90ba395305b40e6eee61f49..98e20532452ab446e12c898aca5c6e6321325793 100644 (file)
--- a/drivers/mmc/core/sdio_ops.c
+++ b/drivers/mmc/core/sdio_ops.c
@@ -88,7 +88,7 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 }
 
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
-       unsigned addr, int bang, u8 *buf, unsigned size)
+       unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
 {
        struct mmc_request mrq;
        struct mmc_command cmd;
@@ -97,7 +97,9 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 
        BUG_ON(!card);
        BUG_ON(fn > 7);
-       BUG_ON(size > 512);
+       BUG_ON(blocks == 1 && blksz > 512);
+       WARN_ON(blocks == 0);
+       WARN_ON(blksz == 0);
 
        memset(&mrq, 0, sizeof(struct mmc_request));
        memset(&cmd, 0, sizeof(struct mmc_command));
@@ -109,18 +111,21 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
        cmd.opcode = SD_IO_RW_EXTENDED;
        cmd.arg = write ? 0x80000000 : 0x00000000;
        cmd.arg |= fn << 28;
-       cmd.arg |= bang ? 0x00000000 : 0x04000000;
+       cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
        cmd.arg |= addr << 9;
-       cmd.arg |= (size == 512) ? 0 : size;
+       if (blocks == 1 && blksz <= 512)
+               cmd.arg |= (blksz == 512) ? 0 : blksz;  /* byte mode */
+       else
+               cmd.arg |= 0x08000000 | blocks;         /* block mode */
        cmd.flags = MMC_RSP_R5 | MMC_CMD_ADTC;
 
-       data.blksz = size;
-       data.blocks = 1;
+       data.blksz = blksz;
+       data.blocks = blocks;
        data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
        data.sg = &sg;
        data.sg_len = 1;
 
-       sg_init_one(&sg, buf, size);
+       sg_init_one(&sg, buf, blksz * blocks);
 
        mmc_set_data_timeout(&data, card);
 

diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h
index 1d42e4f366aad2a5f16fc6a4bdb7f13bbc3f39e3..e2e74b0d17d8c1e7d9deb632ea24826ef9b48bc1 100644 (file)
--- a/drivers/mmc/core/sdio_ops.h
+++ b/drivers/mmc/core/sdio_ops.h
@@ -16,7 +16,7 @@ int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
 int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
        unsigned addr, u8 in, u8* out);
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
-       unsigned addr, int bang, u8 *data, unsigned size);
+       unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
 
 #endif