PCIe has a range property, so the unit name should contain an address.
Make use of the label to enable individual PCIe busses. Also, fixup
the synology dtsi file which added a label pcie2 rather than using the
existing pcie1 label.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
/ {
mbus {
- pciec: pcie-controller {
+ pciec: pcie-controller@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
/ {
mbus {
- pciec: pcie-controller {
+ pciec: pcie-controller@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
/ {
mbus {
- pciec: pcie-controller {
+ pciec: pcie-controller@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
/ {
mbus {
- pciec: pcie-controller {
+ pciec: pcie-controller@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- /* Wifi model has Atheros chipset on pcie port */
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_button_power: pmx-button-power {
};
};
+/* Wifi model has Atheros chipset on pcie port */
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
/ {
model = "Marvell DB-88F6281-BP Development Board";
compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
- mbus {
- pcie-controller {
- status = "okay";
+&pciec {
+ status = "okay";
+};
- pcie@1,0 {
- status = "okay";
- };
- };
- };
+&pcie0 {
+ status = "okay";
};
/ {
model = "Marvell DB-88F6282-BP Development Board";
compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
- mbus {
- pcie-controller {
- status = "okay";
+&pciec {
+ status = "okay";
+};
- pcie@1,0 {
- status = "okay";
- };
+&pcie0 {
+ status = "okay";
+};
- pcie@2,0 {
- status = "okay";
- };
- };
- };
+&pcie1 {
+ status = "okay";
};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 =< &pmx_led_usb
&rtc {
status = "disabled";
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
status = "okay";
};
-&pcie2 {
+&pcie1 {
status = "okay";
};
status = "okay";
};
-&pcie2 {
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
status = "okay";
};
status = "okay";
};
-&pcie2 {
+&pcie1 {
status = "okay";
};
status = "okay";
};
-&pcie2 {
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
status = "okay";
};
status = "okay";
};
-&pcie2 {
+&pcie1 {
status = "okay";
};
linux,initrd-end = <0x4800000>;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_button_reset: pmx-button-reset {
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
status = "okay";
chip-delay = <25>;
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
serial@12000 {
status = "okay";
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_power_hdd0: pmx-power-hdd0 {
};
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_led_health: pmx-led-health {
phy-handle = <ðphy1>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pin-controller@10000 {
pmx_usb_led: pmx-usb-led {
duplex = <1>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
rtc@10300 {
/* The on-chip RTC is not powered (no supercap). */
reg = <0x9100000 0x6f00000>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_button_power: pmx-button-power {
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- /* Connected to NEC uPD720200 USB 3.0 controller */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_button_power: pmx-button-power {
phy-handle = <ðphy0>;
};
};
+
+/* Connected to NEC uPD720200 USB 3.0 controller */
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_unknown>;
};
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-names = "default";
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-names = "default";
};
};
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
/ {
model = "ZyXEL NSA310";
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
reg = <0x5040000 0x2fc0000>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
reg = <0x0600000 0x1FA00000>;
};
};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_usb_power>;
ethernet0-port@0 {
phy-handle = <ðphy0>;
};
-};
\ No newline at end of file
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-names = "default";
duplex = <1>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
status = "okay";
};
-&pcie2 {
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
status = "okay";
};
*/
/ {
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
-
- pcie2: pcie@2,0 {
- status = "disabled";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_alarmled_12: pmx-alarmled-12 {
phy-handle = <ðphy1>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
#include "kirkwood-ts219.dtsi"
/ {
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@2,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
pinctrl: pin-controller@10000 {
};
ðphy0 { reg = <0>; };
+
+&pcie1 { status = "okay"; };
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
ocp@f1000000 {
i2c@11000 {
status = "okay";
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
#include "kirkwood-ts219.dtsi"
#include "kirkwood-ts419.dtsi"
-/ {
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie@2,0 {
- status = "okay";
- };
- };
- };
-};
-
ðphy0 { reg = <0>; };
ðphy1 { reg = <1>; };
+
+&pciec { status = "okay"; };
+&pcie1 { status = "okay"; };
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff