* directory entry when gfs2_inode_lookup() is invoked. Part of the code
* segment inside gfs2_inode_lookup code needs to get moved around.
*
- * Clean up I_LOCK and I_NEW as well.
+ * Clears I_NEW as well.
**/
void gfs2_set_iop(struct inode *inode)
* Prevent speculative execution through spin_unlock(&inode_lock);
*/
smp_mb();
- wake_up_bit(&inode->i_state, __I_LOCK);
+ wake_up_bit(&inode->i_state, __I_NEW);
}
/**
}
#endif
/*
- * This is special! We do not need the spinlock when clearing I_LOCK,
+ * This is special! We do not need the spinlock when clearing I_NEW,
* because we're guaranteed that nobody else tries to do anything about
* the state of the inode when it is locked, as we just created it (so
- * there can be no old holders that haven't tested I_LOCK).
+ * there can be no old holders that haven't tested I_NEW).
* However we must emit the memory barrier so that other CPUs reliably
- * see the clearing of I_LOCK after the other inode initialisation has
+ * see the clearing of I_NEW after the other inode initialisation has
* completed.
*/
smp_mb();
- WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW));
- inode->i_state &= ~(I_LOCK|I_NEW);
+ WARN_ON(!(inode->i_state & I_NEW));
+ inode->i_state &= ~I_NEW;
wake_up_inode(inode);
}
EXPORT_SYMBOL(unlock_new_inode);
goto set_failed;
__inode_add_to_lists(sb, head, inode);
- inode->i_state = I_LOCK|I_NEW;
+ inode->i_state = I_NEW;
spin_unlock(&inode_lock);
/* Return the locked inode with I_NEW set, the
if (!old) {
inode->i_ino = ino;
__inode_add_to_lists(sb, head, inode);
- inode->i_state = I_LOCK|I_NEW;
+ inode->i_state = I_NEW;
spin_unlock(&inode_lock);
/* Return the locked inode with I_NEW set, the
ino_t ino = inode->i_ino;
struct hlist_head *head = inode_hashtable + hash(sb, ino);
- inode->i_state |= I_LOCK|I_NEW;
+ inode->i_state |= I_NEW;
while (1) {
struct hlist_node *node;
struct inode *old = NULL;
struct super_block *sb = inode->i_sb;
struct hlist_head *head = inode_hashtable + hash(sb, hashval);
- inode->i_state |= I_LOCK|I_NEW;
+ inode->i_state |= I_NEW;
while (1) {
struct hlist_node *node;
* until the deletion _might_ have completed. Callers are responsible
* to recheck inode state.
*
- * It doesn't matter if I_LOCK is not set initially, a call to
+ * It doesn't matter if I_NEW is not set initially, a call to
* wake_up_inode() after removing from the hash list will DTRT.
*
* This is called with inode_lock held.
static void __wait_on_freeing_inode(struct inode *inode)
{
wait_queue_head_t *wq;
- DEFINE_WAIT_BIT(wait, &inode->i_state, __I_LOCK);
- wq = bit_waitqueue(&inode->i_state, __I_LOCK);
+ DEFINE_WAIT_BIT(wait, &inode->i_state, __I_NEW);
+ wq = bit_waitqueue(&inode->i_state, __I_NEW);
prepare_to_wait(wq, &wait.wait, TASK_UNINTERRUPTIBLE);
spin_unlock(&inode_lock);
schedule();
*/
/*
* I believe this code is no longer needed. Splitting I_LOCK
- * into two bits, I_LOCK and I_SYNC should prevent this
+ * into two bits, I_NEW and I_SYNC should prevent this
* deadlock as well. But since I don't have a JFS testload
* to verify this, only a trivial s/I_LOCK/I_SYNC/ was done.
* Joern
* the ntfs inode.
*
* Q: What locks are held when the function is called?
- * A: i_state has I_LOCK set, hence the inode is locked, also
+ * A: i_state has I_NEW set, hence the inode is locked, also
* i_count is set to 1, so it is not going to go away
* i_flags is set to 0 and we have no business touching it. Only an ioctl()
* is allowed to write to them. We should of course be honouring them but
* necessary fields in @vi as well as initializing the ntfs inode.
*
* Q: What locks are held when the function is called?
- * A: i_state has I_LOCK set, hence the inode is locked, also
+ * A: i_state has I_NEW set, hence the inode is locked, also
* i_count is set to 1, so it is not going to go away
*
* Return 0 on success and -errno on error. In the error case, the inode will
* normal directory inodes.
*
* Q: What locks are held when the function is called?
- * A: i_state has I_LOCK set, hence the inode is locked, also
+ * A: i_state has I_NEW set, hence the inode is locked, also
* i_count is set to 1, so it is not going to go away
*
* Return 0 on success and -errno on error. In the error case, the inode will
*
* Similarly, @i_mutex is not always locked in 'ubifs_readpage()', e.g., the
* read-ahead path does not lock it ("sys_read -> generic_file_aio_read ->
- * ondemand_readahead -> readpage"). In case of readahead, @I_LOCK flag is not
+ * ondemand_readahead -> readpage"). In case of readahead, @I_SYNC flag is not
* set as well. However, UBIFS disables readahead.
*/
struct inode *inode = &ip->i_vnode;
inode->i_ino = ip->i_ino;
- inode->i_state = I_NEW|I_LOCK;
+ inode->i_state = I_NEW;
inode_add_to_lists(ip->i_mount->m_super, inode);
inode->i_mode = ip->i_d.di_mode;
ip->i_new_size = 0;
/* prevent anyone from using this yet */
- VFS_I(ip)->i_state = I_NEW|I_LOCK;
+ VFS_I(ip)->i_state = I_NEW;
return ip;
}
trace_xfs_iget_reclaim(ip);
goto out_error;
}
- inode->i_state = I_LOCK|I_NEW;
+ inode->i_state = I_NEW;
} else {
/* If the VFS inode is being torn down, pause and try again. */
if (!igrab(inode)) {
* until that flag is cleared. I_WILL_FREE, I_FREEING and I_CLEAR are set at
* various stages of removing an inode.
*
- * Two bits are used for locking and completion notification, I_LOCK and I_SYNC.
+ * Two bits are used for locking and completion notification, I_NEW and I_SYNC.
*
* I_DIRTY_SYNC Inode is dirty, but doesn't have to be written on
* fdatasync(). i_atime is the usual cause.
* don't have to write inode on fdatasync() when only
* mtime has changed in it.
* I_DIRTY_PAGES Inode has dirty pages. Inode itself may be clean.
- * I_NEW get_new_inode() sets i_state to I_LOCK|I_NEW. Both
- * are cleared by unlock_new_inode(), called from iget().
+ * I_NEW Serves as both a mutex and completion notification.
+ * New inodes set I_NEW. If two processes both create
+ * the same inode, one of them will release its inode and
+ * wait for I_NEW to be released before returning.
+ * Inodes in I_WILL_FREE, I_FREEING or I_CLEAR state can
+ * also cause waiting on I_NEW, without I_NEW actually
+ * being set. find_inode() uses this to prevent returning
+ * nearly-dead inodes.
* I_WILL_FREE Must be set when calling write_inode_now() if i_count
* is zero. I_FREEING must be set when I_WILL_FREE is
* cleared.
* prohibited for many purposes. iget() must wait for
* the inode to be completely released, then create it
* anew. Other functions will just ignore such inodes,
- * if appropriate. I_LOCK is used for waiting.
+ * if appropriate. I_NEW is used for waiting.
*
- * I_LOCK Serves as both a mutex and completion notification.
- * New inodes set I_LOCK. If two processes both create
- * the same inode, one of them will release its inode and
- * wait for I_LOCK to be released before returning.
- * Inodes in I_WILL_FREE, I_FREEING or I_CLEAR state can
- * also cause waiting on I_LOCK, without I_LOCK actually
- * being set. find_inode() uses this to prevent returning
- * nearly-dead inodes.
- * I_SYNC Similar to I_LOCK, but limited in scope to writeback
- * of inode dirty data. Having a separate lock for this
- * purpose reduces latency and prevents some filesystem-
- * specific deadlocks.
+ * I_SYNC Synchonized write of dirty inode data. The bits is
+ * set during data writeback, and cleared with a wakeup
+ * on the bit address once it is done.
*
* Q: What is the difference between I_WILL_FREE and I_FREEING?
* Q: igrab() only checks on (I_FREEING|I_WILL_FREE). Should it also check on
#define I_DIRTY_SYNC 1
#define I_DIRTY_DATASYNC 2
#define I_DIRTY_PAGES 4
-#define I_NEW 8
+#define __I_NEW 3
+#define I_NEW (1 << __I_NEW)
#define I_WILL_FREE 16
#define I_FREEING 32
#define I_CLEAR 64
-#define __I_LOCK 7
-#define I_LOCK (1 << __I_LOCK)
-#define __I_SYNC 8
+#define __I_SYNC 7
#define I_SYNC (1 << __I_SYNC)
#define I_DIRTY (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_PAGES)
static inline void wait_on_inode(struct inode *inode)
{
might_sleep();
- wait_on_bit(&inode->i_state, __I_LOCK, inode_wait,
- TASK_UNINTERRUPTIBLE);
+ wait_on_bit(&inode->i_state, __I_NEW, inode_wait, TASK_UNINTERRUPTIBLE);
}
static inline void inode_sync_wait(struct inode *inode)
{
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff