As warned several times before.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---------------------------
-What: Support for NEC DDB5074 and DDB5476 evaluation boards.
+What: Support for NEC DDB5476 evaluation boards.
When: June 2006
Why: Board specific code doesn't build anymore since ~2.6.0 and no
users have complained indicating there is no more need for these
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
-config DDB5074
- bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DDB5XXX_COMMON
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_HAS_CPU_R5000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the VR5000-based NEC DDB Vrc-5074
- evaluation board.
-
config DDB5476
bool "NEC DDB Vrc-5476"
select DDB5XXX_COMMON
#
core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/
-#
-# NEC DDB Vrc-5074
-#
-core-$(CONFIG_DDB5074) += arch/mips/ddb5xxx/ddb5074/
-load-$(CONFIG_DDB5074) += 0xffffffff80080000
-
#
# NEC DDB Vrc-5476
#
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
CONFIG_DDB5476=y
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
CONFIG_DDB5477=y
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
CONFIG_PNX8550_JBS=y
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
CONFIG_PNX8550_V2PCI=y
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
mips_machgroup = MACH_GROUP_NEC_DDB;
-#if defined(CONFIG_DDB5074)
- mips_machtype = MACH_NEC_DDB5074;
- add_memory_region(0, DDB_SDRAM_SIZE, BOOT_MEM_RAM);
-#elif defined(CONFIG_DDB5476)
+#if defined(CONFIG_DDB5476)
mips_machtype = MACH_NEC_DDB5476;
add_memory_region(0, DDB_SDRAM_SIZE, BOOT_MEM_RAM);
#elif defined(CONFIG_DDB5477)
+++ /dev/null
-#
-# Makefile for the NEC DDB Vrc-5074 specific kernel interface routines
-# under Linux.
-#
-
-obj-y += setup.o irq.o nile4_pic.o
-
-EXTRA_AFLAGS := $(CFLAGS)
+++ /dev/null
-/*
- * arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- * Sony Software Development Center Europe (SDCE), Brussels
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/i8259.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/ptrace.h>
-#include <asm/nile4.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-#include <asm/ddb5xxx/ddb5074.h>
-
-
-static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
-
-#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */
-#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */
-#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */
-
-#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */
-#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */
-#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */
-
-#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */
-#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */
-
-#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */
-#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */
-
-#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */
-#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */
-
-
-static void m1543_irq_setup(void)
-{
- /*
- * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all
- * the possible IO sources in the M1543 are in use by us. We will
- * use the following mapping:
- *
- * IRQ1 - keyboard (default set by M1543)
- * IRQ3 - reserved for UART B (default set by M1543) (note that
- * the schematics for the DDB Vrc-5074 board seem to
- * indicate that IRQ3 is connected to the DS1386
- * watchdog timer interrupt output so we might have
- * a conflict)
- * IRQ4 - reserved for UART A (default set by M1543)
- * IRQ5 - parallel (default set by M1543)
- * IRQ8 - DS1386 time of day (RTC) interrupt
- * IRQ12 - mouse
- */
-
- /*
- * Assing mouse interrupt to IRQ12
- */
-
- /* Enter configuration mode */
- outb(0x51, M1543_PNP_CONFIG);
- outb(0x23, M1543_PNP_CONFIG);
-
- /* Select logical device 7 (Keyboard) */
- outb(0x07, M1543_PNP_INDEX);
- outb(0x07, M1543_PNP_DATA);
-
- /* Select IRQ12 */
- outb(0x72, M1543_PNP_INDEX);
- outb(0x0c, M1543_PNP_DATA);
-
- outb(0x30, M1543_PNP_INDEX);
- printk("device 7, 0x30: %02x\n",inb(M1543_PNP_DATA));
-
- outb(0x70, M1543_PNP_INDEX);
- printk("device 7, 0x70: %02x\n",inb(M1543_PNP_DATA));
-
- /* Leave configration mode */
- outb(0xbb, M1543_PNP_CONFIG);
-
-
-}
-
-static void ddb_local0_irqdispatch(struct pt_regs *regs)
-{
- u32 mask;
- int nile4_irq;
-
- mask = nile4_get_irq_stat(0);
-
- /* Handle the timer interrupt first */
-#if 0
- if (mask & (1 << NILE4_INT_GPT)) {
- do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs);
- mask &= ~(1 << NILE4_INT_GPT);
- }
-#endif
- for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1)
- if (mask & 1) {
- if (nile4_irq == NILE4_INT_INTE) {
- int i8259_irq;
-
- nile4_clear_irq(NILE4_INT_INTE);
- i8259_irq = nile4_i8259_iack();
- do_IRQ(i8259_irq, regs);
- } else
- do_IRQ(nile4_to_irq(nile4_irq), regs);
-
- }
-}
-
-static void ddb_local1_irqdispatch(void)
-{
- printk("ddb_local1_irqdispatch called\n");
-}
-
-static void ddb_buserror_irq(void)
-{
- printk("ddb_buserror_irq called\n");
-}
-
-static void ddb_8254timer_irq(void)
-{
- printk("ddb_8254timer_irq called\n");
-}
-
-asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
-{
- unsigned int pending = read_c0_cause() & read_c0_status();
-
- if (pending & CAUSEF_IP2)
- ddb_local0_irqdispatch(regs);
- else if (pending & CAUSEF_IP3)
- ddb_local1_irqdispatch();
- else if (pending & CAUSEF_IP6)
- ddb_buserror_irq();
- else if (pending & (CAUSEF_IP4 | CAUSEF_IP5))
- ddb_8254timer_irq();
-}
-
-void __init arch_init_irq(void)
-{
- /* setup cascade interrupts */
- setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade);
- setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade);
-
- nile4_irq_setup(NILE4_IRQ_BASE);
- m1543_irq_setup();
- init_i8259_irqs();
-
-
- printk("CPU_IRQ_BASE: %d\n",CPU_IRQ_BASE);
-
- mips_cpu_irq_init(CPU_IRQ_BASE);
-
- printk("enabling 8259 cascade\n");
-
- ddb5074_led_hex(0);
-
- /* Enable the interrupt cascade */
- nile4_enable_irq(NILE4_IRQ_BASE+IRQ_I8259_CASCADE);
-}
+++ /dev/null
-/*
- * arch/mips/ddb5476/nile4.c --
- * low-level PIC code for NEC Vrc-5476 (Nile 4)
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- * Sony Software Development Center Europe (SDCE), Brussels
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static int irq_base;
-
-/*
- * Interrupt Programming
- */
-void nile4_map_irq(int nile4_irq, int cpu_irq)
-{
- u32 offset, t;
-
- offset = DDB_INTCTRL;
- if (nile4_irq >= 8) {
- offset += 4;
- nile4_irq -= 8;
- }
- t = ddb_in32(offset);
- t &= ~(7 << (nile4_irq * 4));
- t |= cpu_irq << (nile4_irq * 4);
- ddb_out32(offset, t);
-}
-
-void nile4_map_irq_all(int cpu_irq)
-{
- u32 all, t;
-
- all = cpu_irq;
- all |= all << 4;
- all |= all << 8;
- all |= all << 16;
- t = ddb_in32(DDB_INTCTRL);
- t &= 0x88888888;
- t |= all;
- ddb_out32(DDB_INTCTRL, t);
- t = ddb_in32(DDB_INTCTRL + 4);
- t &= 0x88888888;
- t |= all;
- ddb_out32(DDB_INTCTRL + 4, t);
-}
-
-void nile4_enable_irq(unsigned int nile4_irq)
-{
- u32 offset, t;
-
- nile4_irq-=irq_base;
-
- ddb5074_led_hex(8);
-
- offset = DDB_INTCTRL;
- if (nile4_irq >= 8) {
- offset += 4;
- nile4_irq -= 8;
- }
- ddb5074_led_hex(9);
- t = ddb_in32(offset);
- ddb5074_led_hex(0xa);
- t |= 8 << (nile4_irq * 4);
- ddb_out32(offset, t);
- ddb5074_led_hex(0xb);
-}
-
-void nile4_disable_irq(unsigned int nile4_irq)
-{
- u32 offset, t;
-
- nile4_irq-=irq_base;
-
- offset = DDB_INTCTRL;
- if (nile4_irq >= 8) {
- offset += 4;
- nile4_irq -= 8;
- }
- t = ddb_in32(offset);
- t &= ~(8 << (nile4_irq * 4));
- ddb_out32(offset, t);
-}
-
-void nile4_disable_irq_all(void)
-{
- ddb_out32(DDB_INTCTRL, 0);
- ddb_out32(DDB_INTCTRL + 4, 0);
-}
-
-u16 nile4_get_irq_stat(int cpu_irq)
-{
- return ddb_in16(DDB_INTSTAT0 + cpu_irq * 2);
-}
-
-void nile4_enable_irq_output(int cpu_irq)
-{
- u32 t;
-
- t = ddb_in32(DDB_INTSTAT1 + 4);
- t |= 1 << (16 + cpu_irq);
- ddb_out32(DDB_INTSTAT1, t);
-}
-
-void nile4_disable_irq_output(int cpu_irq)
-{
- u32 t;
-
- t = ddb_in32(DDB_INTSTAT1 + 4);
- t &= ~(1 << (16 + cpu_irq));
- ddb_out32(DDB_INTSTAT1, t);
-}
-
-void nile4_set_pci_irq_polarity(int pci_irq, int high)
-{
- u32 t;
-
- t = ddb_in32(DDB_INTPPES);
- if (high)
- t &= ~(1 << (pci_irq * 2));
- else
- t |= 1 << (pci_irq * 2);
- ddb_out32(DDB_INTPPES, t);
-}
-
-void nile4_set_pci_irq_level_or_edge(int pci_irq, int level)
-{
- u32 t;
-
- t = ddb_in32(DDB_INTPPES);
- if (level)
- t |= 2 << (pci_irq * 2);
- else
- t &= ~(2 << (pci_irq * 2));
- ddb_out32(DDB_INTPPES, t);
-}
-
-void nile4_clear_irq(int nile4_irq)
-{
- nile4_irq-=irq_base;
- ddb_out32(DDB_INTCLR, 1 << nile4_irq);
-}
-
-void nile4_clear_irq_mask(u32 mask)
-{
- ddb_out32(DDB_INTCLR, mask);
-}
-
-u8 nile4_i8259_iack(void)
-{
- u8 irq;
- u32 reg;
-
- /* Set window 0 for interrupt acknowledge */
- reg = ddb_in32(DDB_PCIINIT0);
-
- ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32);
- irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
- /* restore window 0 for PCI I/O space */
- // ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
- ddb_out32(DDB_PCIINIT0, reg);
-
- /* i8269.c set the base vector to be 0x0 */
- return irq ;
-}
-
-static unsigned int nile4_irq_startup(unsigned int irq) {
-
- nile4_enable_irq(irq);
- return 0;
-
-}
-
-static void nile4_ack_irq(unsigned int irq) {
-
- ddb5074_led_hex(4);
-
- nile4_clear_irq(irq);
- ddb5074_led_hex(2);
- nile4_disable_irq(irq);
-
- ddb5074_led_hex(0);
-}
-
-static void nile4_irq_end(unsigned int irq) {
-
- ddb5074_led_hex(3);
- if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
- ddb5074_led_hex(5);
- nile4_enable_irq(irq);
- ddb5074_led_hex(7);
- }
-
- ddb5074_led_hex(1);
-}
-
-#define nile4_irq_shutdown nile4_disable_irq
-
-static hw_irq_controller nile4_irq_controller = {
- .typename = "nile4",
- .startup = nile4_irq_startup,
- .shutdown = nile4_irq_shutdown,
- .enable = nile4_enable_irq,
- .disable = nile4_disable_irq,
- .ack = nile4_ack_irq,
- .end = nile4_irq_end,
-};
-
-void nile4_irq_setup(u32 base) {
-
- int i;
-
- irq_base=base;
-
- /* Map all interrupts to CPU int #0 */
- nile4_map_irq_all(0);
-
- /* PCI INTA#-E# must be level triggered */
- nile4_set_pci_irq_level_or_edge(0, 1);
- nile4_set_pci_irq_level_or_edge(1, 1);
- nile4_set_pci_irq_level_or_edge(2, 1);
- nile4_set_pci_irq_level_or_edge(3, 1);
- nile4_set_pci_irq_level_or_edge(4, 1);
-
- /* PCI INTA#-D# must be active low, INTE# must be active high */
- nile4_set_pci_irq_polarity(0, 0);
- nile4_set_pci_irq_polarity(1, 0);
- nile4_set_pci_irq_polarity(2, 0);
- nile4_set_pci_irq_polarity(3, 0);
- nile4_set_pci_irq_polarity(4, 1);
-
-
- for (i = 0; i < 16; i++) {
- nile4_clear_irq(i);
- nile4_disable_irq(i);
- }
-
- /* Enable CPU int #0 */
- nile4_enable_irq_output(0);
-
- for (i= base; i< base + NUM_NILE4_INTERRUPTS; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].handler = &nile4_irq_controller;
- }
-}
-
-#if defined(CONFIG_RUNTIME_DEBUG)
-void nile4_dump_irq_status(void)
-{
- printk(KERN_DEBUG "
- CPUSTAT = %p:%p\n", (void *) ddb_in32(DDB_CPUSTAT + 4),
- (void *) ddb_in32(DDB_CPUSTAT));
- printk(KERN_DEBUG "
- INTCTRL = %p:%p\n", (void *) ddb_in32(DDB_INTCTRL + 4),
- (void *) ddb_in32(DDB_INTCTRL));
- printk(KERN_DEBUG
- "INTSTAT0 = %p:%p\n",
- (void *) ddb_in32(DDB_INTSTAT0 + 4),
- (void *) ddb_in32(DDB_INTSTAT0));
- printk(KERN_DEBUG
- "INTSTAT1 = %p:%p\n",
- (void *) ddb_in32(DDB_INTSTAT1 + 4),
- (void *) ddb_in32(DDB_INTSTAT1));
- printk(KERN_DEBUG
- "INTCLR = %p:%p\n", (void *) ddb_in32(DDB_INTCLR + 4),
- (void *) ddb_in32(DDB_INTCLR));
- printk(KERN_DEBUG
- "INTPPES = %p:%p\n", (void *) ddb_in32(DDB_INTPPES + 4),
- (void *) ddb_in32(DDB_INTPPES));
-}
-
-#endif
+++ /dev/null
-/*
- * arch/mips/ddb5074/setup.c -- NEC DDB Vrc-5074 setup routines
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- * Sony Software Development Center Europe (SDCE), Brussels
- */
-#include <linux/init.h>
-#include <linux/kbd_ll.h>
-#include <linux/kernel.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/pm.h>
-
-#include <asm/addrspace.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
-#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/time.h>
-#include <asm/nile4.h>
-#include <asm/ddb5xxx/ddb5074.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000;
-
-static void ddb_machine_restart(char *command)
-{
- u32 t;
-
- /* PCI cold reset */
- t = nile4_in32(NILE4_PCICTRL + 4);
- t |= 0x40000000;
- nile4_out32(NILE4_PCICTRL + 4, t);
- /* CPU cold reset */
- t = nile4_in32(NILE4_CPUSTAT);
- t |= 1;
- nile4_out32(NILE4_CPUSTAT, t);
- /* Call the PROM */
- back_to_prom();
-}
-
-static void ddb_machine_halt(void)
-{
- printk("DDB Vrc-5074 halted.\n");
- do {
- } while (1);
-}
-
-static void ddb_machine_power_off(void)
-{
- printk("DDB Vrc-5074 halted. Please turn off the power.\n");
- do {
- } while (1);
-}
-
-extern void rtc_ds1386_init(unsigned long base);
-
-extern void (*board_timer_setup) (struct irqaction * irq);
-
-static void __init ddb_timer_init(struct irqaction *irq)
-{
- /* set the clock to 1 Hz */
- nile4_out32(NILE4_T2CTRL, 1000000);
- /* enable the General-Purpose Timer */
- nile4_out32(NILE4_T2CTRL + 4, 0x00000001);
- /* reset timer */
- nile4_out32(NILE4_T2CNTR, 0);
- /* enable interrupt */
- setup_irq(nile4_to_irq(NILE4_INT_GPT), irq);
- nile4_enable_irq(nile4_to_irq(NILE4_INT_GPT));
- change_c0_status(ST0_IM,
- IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4);
-
-}
-
-static void __init ddb_time_init(void)
-{
- /* we have ds1396 RTC chip */
- rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE));
-}
-
-
-
-void __init plat_mem_setup(void)
-{
- set_io_port_base(NILE4_PCI_IO_BASE);
- isa_slot_offset = NILE4_PCI_MEM_BASE;
- board_timer_setup = ddb_timer_init;
- board_time_init = ddb_time_init;
-
-
- _machine_restart = ddb_machine_restart;
- _machine_halt = ddb_machine_halt;
- pm_power_off = ddb_machine_power_off;
-
- ddb_out32(DDB_BAR0, 0);
-
- ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, 0x10);
- ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE , 0x10);
-
- /* Reboot on panic */
- panic_timeout = 180;
-}
-
-#define USE_NILE4_SERIAL 0
-
-#if USE_NILE4_SERIAL
-#define ns16550_in(reg) nile4_in8((reg)*8)
-#define ns16550_out(reg, val) nile4_out8((reg)*8, (val))
-#else
-#define NS16550_BASE (NILE4_PCI_IO_BASE+0x03f8)
-static inline u8 ns16550_in(u32 reg)
-{
- return *(volatile u8 *) (NS16550_BASE + reg);
-}
-
-static inline void ns16550_out(u32 reg, u8 val)
-{
- *(volatile u8 *) (NS16550_BASE + reg) = val;
-}
-#endif
-
-#define NS16550_RBR 0
-#define NS16550_THR 0
-#define NS16550_DLL 0
-#define NS16550_IER 1
-#define NS16550_DLM 1
-#define NS16550_FCR 2
-#define NS16550_IIR 2
-#define NS16550_LCR 3
-#define NS16550_MCR 4
-#define NS16550_LSR 5
-#define NS16550_MSR 6
-#define NS16550_SCR 7
-
-#define NS16550_LSR_DR 0x01 /* Data ready */
-#define NS16550_LSR_OE 0x02 /* Overrun */
-#define NS16550_LSR_PE 0x04 /* Parity error */
-#define NS16550_LSR_FE 0x08 /* Framing error */
-#define NS16550_LSR_BI 0x10 /* Break */
-#define NS16550_LSR_THRE 0x20 /* Xmit holding register empty */
-#define NS16550_LSR_TEMT 0x40 /* Xmitter empty */
-#define NS16550_LSR_ERR 0x80 /* Error */
-
-
-void _serinit(void)
-{
-#if USE_NILE4_SERIAL
- ns16550_out(NS16550_LCR, 0x80);
- ns16550_out(NS16550_DLM, 0x00);
- ns16550_out(NS16550_DLL, 0x36); /* 9600 baud */
- ns16550_out(NS16550_LCR, 0x00);
- ns16550_out(NS16550_LCR, 0x03);
- ns16550_out(NS16550_FCR, 0x47);
-#else
- /* done by PMON */
-#endif
-}
-
-void _putc(char c)
-{
- while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE));
- ns16550_out(NS16550_THR, c);
- if (c == '\n') {
- while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE));
- ns16550_out(NS16550_THR, '\r');
- }
-}
-
-void _puts(const char *s)
-{
- char c;
- while ((c = *s++))
- _putc(c);
-}
-
-char _getc(void)
-{
- while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_DR));
- return ns16550_in(NS16550_RBR);
-}
-
-int _testc(void)
-{
- return (ns16550_in(NS16550_LSR) & NS16550_LSR_DR) != 0;
-}
-
-
-/*
- * Hexadecimal 7-segment LED
- */
-void ddb5074_led_hex(int hex)
-{
- outb(hex, 0x80);
-}
-
-
-/*
- * LEDs D2 and D3, connected to the GPIO pins of the PMU in the ALi M1543
- */
-struct pci_dev *pci_pmu = NULL;
-
-void ddb5074_led_d2(int on)
-{
- u8 t;
-
- if (pci_pmu) {
- pci_read_config_byte(pci_pmu, 0x7e, &t);
- if (on)
- t &= 0x7f;
- else
- t |= 0x80;
- pci_write_config_byte(pci_pmu, 0x7e, t);
- }
-}
-
-void ddb5074_led_d3(int on)
-{
- u8 t;
-
- if (pci_pmu) {
- pci_read_config_byte(pci_pmu, 0x7e, &t);
- if (on)
- t &= 0xbf;
- else
- t |= 0x40;
- pci_write_config_byte(pci_pmu, 0x7e, t);
- }
-}
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
#
# These are still pretty much in the old state, watch, go blind.
#
-obj-$(CONFIG_DDB5074) += fixup-ddb5074.o pci-ddb5074.o ops-ddb5074.o
obj-$(CONFIG_DDB5476) += ops-ddb5476.o pci-ddb5476.o
obj-$(CONFIG_DDB5477) += fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o
obj-$(CONFIG_LASAT) += pci-lasat.o
+++ /dev/null
-/*
- * It's nice to have the LEDs on the GPIO pins available for debugging
- */
-static void ddb5074_fixup(struct pci_dev *dev)
-{
- extern struct pci_dev *pci_pmu;
- u8 t8;
-
- pci_pmu = dev; /* for LEDs D2 and D3 */
- /* Program the lines for LEDs D2 and D3 to output */
- pci_read_config_byte(dev, 0x7d, &t8);
- t8 |= 0xc0;
- pci_write_config_byte(dev, 0x7d, t8);
- /* Turn LEDs D2 and D3 off */
- pci_read_config_byte(dev, 0x7e, &t8);
- t8 |= 0xc0;
- pci_write_config_byte(dev, 0x7e, t8);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
- ddb5074_fixup);
+++ /dev/null
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/ddb5476/pci_ops.c
- * Define the pci_ops for DB5477.
- *
- * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@sonycom.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-/*
- * config_swap structure records what set of pdar/pmr are used
- * to access pci config space. It also provides a place hold the
- * original values for future restoring.
- */
-struct pci_config_swap {
- u32 pdar;
- u32 pmr;
- u32 config_base;
- u32 config_size;
- u32 pdar_backup;
- u32 pmr_backup;
-};
-
-/*
- * On DDB5476, we have one set of swap registers
- */
-struct pci_config_swap ext_pci_swap = {
- DDB_PCIW0,
- DDB_PCIINIT0,
- DDB_PCI_CONFIG_BASE,
- DDB_PCI_CONFIG_SIZE
-};
-
-static int pci_config_workaround = 1;
-
-/*
- * access config space
- */
-static inline u32 ddb_access_config_base(struct pci_config_swap *swap, u32 bus, /* 0 means top level bus */
- u32 slot_num)
-{
- u32 pci_addr = 0;
- u32 pciinit_offset = 0;
- u32 virt_addr = swap->config_base;
- u32 option;
-
- if (pci_config_workaround) {
- if (slot_num == 5)
- slot_num = 14;
- } else {
- if (slot_num == 5)
- return DDB_BASE + DDB_PCI_BASE;
- }
-
- /* minimum pdar (window) size is 2MB */
- db_assert(swap->config_size >= (2 << 20));
-
- db_assert(slot_num < (1 << 5));
- db_assert(bus < (1 << 8));
-
- /* backup registers */
- swap->pdar_backup = ddb_in32(swap->pdar);
- swap->pmr_backup = ddb_in32(swap->pmr);
-
- /* set the pdar (pci window) register */
- ddb_set_pdar(swap->pdar, swap->config_base, swap->config_size, 32, /* 32 bit wide */
- 0, /* not on local memory bus */
- 0); /* not visible from PCI bus (N/A) */
-
- /*
- * calcuate the absolute pci config addr;
- * according to the spec, we start scanning from adr:11 (0x800)
- */
- if (bus == 0) {
- /* type 0 config */
- pci_addr = 0x00040000 << slot_num;
- } else {
- /* type 1 config */
- pci_addr = 0x00040000 << slot_num;
- panic
- ("ddb_access_config_base: we don't support type 1 config Yet");
- }
-
- /*
- * if pci_addr is less than pci config window size, we set
- * pciinit_offset to 0 and adjust the virt_address.
- * Otherwise we will try to adjust pciinit_offset.
- */
- if (pci_addr < swap->config_size) {
- virt_addr = KSEG1ADDR(swap->config_base + pci_addr);
- pciinit_offset = 0;
- } else {
- db_assert((pci_addr & (swap->config_size - 1)) == 0);
- virt_addr = KSEG1ADDR(swap->config_base);
- pciinit_offset = pci_addr;
- }
-
- /* set the pmr register */
- option = DDB_PCI_ACCESS_32;
- if (bus != 0)
- option |= DDB_PCI_CFGTYPE1;
- ddb_set_pmr(swap->pmr, DDB_PCICMD_CFG, pciinit_offset, option);
-
- return virt_addr;
-}
-
-static inline void ddb_close_config_base(struct pci_config_swap *swap)
-{
- ddb_out32(swap->pdar, swap->pdar_backup);
- ddb_out32(swap->pmr, swap->pmr_backup);
-}
-
-static int read_config_dword(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u32 * val)
-{
- u32 bus, slot_num, func_num;
- u32 base;
-
- db_assert((where & 3) == 0);
- db_assert(where < (1 << 8));
-
- /* check if the bus is top-level */
- if (dev->bus->parent != NULL) {
- bus = dev->bus->number;
- db_assert(bus != 0);
- } else {
- bus = 0;
- }
-
- slot_num = PCI_SLOT(dev->devfn);
- func_num = PCI_FUNC(dev->devfn);
- base = ddb_access_config_base(swap, bus, slot_num);
- *val = *(volatile u32 *) (base + (func_num << 8) + where);
- ddb_close_config_base(swap);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int read_config_word(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u16 * val)
-{
- int status;
- u32 result;
-
- db_assert((where & 1) == 0);
-
- status = read_config_dword(swap, dev, where & ~3, &result);
- if (where & 2)
- result >>= 16;
- *val = result & 0xffff;
- return status;
-}
-
-static int read_config_byte(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u8 * val)
-{
- int status;
- u32 result;
-
- status = read_config_dword(swap, dev, where & ~3, &result);
- if (where & 1)
- result >>= 8;
- if (where & 2)
- result >>= 16;
- *val = result & 0xff;
- return status;
-}
-
-static int write_config_dword(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u32 val)
-{
- u32 bus, slot_num, func_num;
- u32 base;
-
- db_assert((where & 3) == 0);
- db_assert(where < (1 << 8));
-
- /* check if the bus is top-level */
- if (dev->bus->parent != NULL) {
- bus = dev->bus->number;
- db_assert(bus != 0);
- } else {
- bus = 0;
- }
-
- slot_num = PCI_SLOT(dev->devfn);
- func_num = PCI_FUNC(dev->devfn);
- base = ddb_access_config_base(swap, bus, slot_num);
- *(volatile u32 *) (base + (func_num << 8) + where) = val;
- ddb_close_config_base(swap);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int write_config_word(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u16 val)
-{
- int status, shift = 0;
- u32 result;
-
- db_assert((where & 1) == 0);
-
- status = read_config_dword(swap, dev, where & ~3, &result);
- if (status != PCIBIOS_SUCCESSFUL)
- return status;
-
- if (where & 2)
- shift += 16;
- result &= ~(0xffff << shift);
- result |= val << shift;
- return write_config_dword(swap, dev, where & ~3, result);
-}
-
-static int write_config_byte(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u8 val)
-{
- int status, shift = 0;
- u32 result;
-
- status = read_config_dword(swap, dev, where & ~3, &result);
- if (status != PCIBIOS_SUCCESSFUL)
- return status;
-
- if (where & 2)
- shift += 16;
- if (where & 1)
- shift += 8;
- result &= ~(0xff << shift);
- result |= val << shift;
- return write_config_dword(swap, dev, where & ~3, result);
-}
-
-#define MAKE_PCI_OPS(prefix, rw, unitname, unittype, pciswap) \
-static int prefix##_##rw##_config_##unitname(struct pci_dev *dev, int where, unittype val) \
-{ \
- return rw##_config_##unitname(pciswap, \
- dev, \
- where, \
- val); \
-}
-
-MAKE_PCI_OPS(extpci, read, byte, u8 *, &ext_pci_swap)
- MAKE_PCI_OPS(extpci, read, word, u16 *, &ext_pci_swap)
- MAKE_PCI_OPS(extpci, read, dword, u32 *, &ext_pci_swap)
-
- MAKE_PCI_OPS(extpci, write, byte, u8, &ext_pci_swap)
- MAKE_PCI_OPS(extpci, write, word, u16, &ext_pci_swap)
- MAKE_PCI_OPS(extpci, write, dword, u32, &ext_pci_swap)
-
-struct pci_ops ddb5476_ext_pci_ops = {
- extpci_read_config_byte,
- extpci_read_config_word,
- extpci_read_config_dword,
- extpci_write_config_byte,
- extpci_write_config_word,
- extpci_write_config_dword
-};
+++ /dev/null
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static struct resource extpci_io_resource = {
- .start = 0x1000, /* leave some room for ISA bus */
- .end = DDB_PCI_IO_SIZE - 1,
- .name = "pci IO space",
- .flags = IORESOURCE_IO
-};
-
-static struct resource extpci_mem_resource = {
- .start = DDB_PCI_MEM_BASE + 0x00100000, /* leave 1 MB for RTC */
- .end = DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
- .name = "pci memory space",
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops ddb5476_ext_pci_ops;
-
-struct pci_controller ddb5476_controller = {
- .pci_ops = &ddb5476_ext_pci_ops,
- .io_resource = &extpci_io_resource,
- .mem_resource = &extpci_mem_resource,
-};
-
-#define PCI_EXT_INTA 8
-#define PCI_EXT_INTB 9
-#define PCI_EXT_INTC 10
-#define PCI_EXT_INTD 11
-#define PCI_EXT_INTE 12
-
-#define MAX_SLOT_NUM 14
-
-static unsigned char irq_map[MAX_SLOT_NUM] = {
- [ 0] = nile4_to_irq(PCI_EXT_INTE),
- [ 1] = nile4_to_irq(PCI_EXT_INTA),
- [ 2] = nile4_to_irq(PCI_EXT_INTA),
- [ 3] = nile4_to_irq(PCI_EXT_INTB),
- [ 4] = nile4_to_irq(PCI_EXT_INTC),
- [ 5] = nile4_to_irq(NILE4_INT_UART),
- [10] = nile4_to_irq(PCI_EXT_INTE),
- [13] = nile4_to_irq(PCI_EXT_INTE),
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- return irq_map[slot];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
-
-void __init ddb_pci_reset_bus(void)
-{
- u32 temp;
-
- /*
- * I am not sure about the "official" procedure, the following
- * steps work as far as I know:
- * We first set PCI cold reset bit (bit 31) in PCICTRL-H.
- * Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
- * The same is true for both PCI channels.
- */
- temp = ddb_in32(DDB_PCICTRL + 4);
- temp |= 0x80000000;
- ddb_out32(DDB_PCICTRL + 4, temp);
- temp &= ~0xc0000000;
- ddb_out32(DDB_PCICTRL + 4, temp);
-
-}
+++ /dev/null
-/*
- * include/asm-mips/ddb5074.h -- NEC DDB Vrc-5074 definitions
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- * Sony Software Development Center Europe (SDCE), Brussels
- */
-
-extern void ddb5074_led_hex(int hex);
-extern void ddb5074_led_d2(int on);
-extern void ddb5074_led_d3(int on);
-
+++ /dev/null
-/*
- * include/asm-mips/ddb5074.h -- NEC DDB Vrc-5074 definitions
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- * Sony Software Development Center Europe (SDCE), Brussels
- */
-
-#ifndef _ASM_DDB5XXX_DDB5074_H
-#define _ASM_DDB5XXX_DDB5074_H
-
-#include <asm/nile4.h>
-
-#define DDB_SDRAM_SIZE 0x04000000 /* 64MB */
-
-#define DDB_PCI_IO_BASE 0x06000000
-#define DDB_PCI_IO_SIZE 0x02000000 /* 32 MB */
-
-#define DDB_PCI_MEM_BASE 0x08000000
-#define DDB_PCI_MEM_SIZE 0x08000000 /* 128 MB */
-
-#define DDB_PCI_CONFIG_BASE DDB_PCI_MEM_BASE
-#define DDB_PCI_CONFIG_SIZE DDB_PCI_MEM_SIZE
-
-#define NILE4_PCI_IO_BASE 0xa6000000
-#define NILE4_PCI_MEM_BASE 0xa8000000
-#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE
-#define DDB_PCI_IACK_BASE NILE4_PCI_IO_BASE
-
-#define NILE4_IRQ_BASE NUM_I8259_INTERRUPTS
-#define CPU_IRQ_BASE (NUM_NILE4_INTERRUPTS + NILE4_IRQ_BASE)
-#define CPU_NILE4_CASCADE 2
-
-extern void ddb5074_led_hex(int hex);
-extern void ddb5074_led_d2(int on);
-extern void ddb5074_led_d3(int on);
-
-extern void nile4_irq_setup(u32 base);
-#endif
static inline void ddb_sync(void)
{
-/* The DDB5074 doesn't seem to like these accesses. They kill the board on
- * interrupt load
- */
-#ifndef CONFIG_DDB5074
volatile u32 *p = (volatile u32 *)0xbfc00000;
(void)(*p);
-#endif
}
static inline void ddb_out32(u32 offset, u32 val)
/*
* include the board dependent part
*/
-#if defined(CONFIG_DDB5074)
-#include <asm/ddb5xxx/ddb5074.h>
-#elif defined(CONFIG_DDB5476)
+#if defined(CONFIG_DDB5476)
#include <asm/ddb5xxx/ddb5476.h>
#elif defined(CONFIG_DDB5477)
#include <asm/ddb5xxx/ddb5477.h>
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2001, 03 by Ralf Baechle
- *
- * RTC routines for PC style attached Dallas chip.
- */
-#ifndef __ASM_MACH_DDB5074_MC146818RTC_H
-#define __ASM_MACH_DDB5074_MC146818RTC_H
-
-#include <asm/ddb5xxx/ddb5074.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-#define RTC_PORT(x) (0x70 + (x))
-#define RTC_IRQ 8
-
-static inline unsigned char CMOS_READ(unsigned long addr)
-{
- return *(volatile unsigned char *)(KSEG1ADDR(DDB_PCI_MEM_BASE)+addr);
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
-{
- *(volatile unsigned char *)(KSEG1ADDR(DDB_PCI_MEM_BASE)+addr) = data;
-}
-
-#define RTC_ALWAYS_BCD 1
-
-#endif /* __ASM_MACH_DDB5074_MC146818RTC_H */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff