pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver
authorPramod Kumar <pramodku@broadcom.com>
Mon, 19 Oct 2015 05:43:09 +0000 (11:13 +0530)
committerLinus Walleij <linus.walleij@linaro.org>
Tue, 27 Oct 2015 09:44:57 +0000 (10:44 +0100)
Remove gpio to pinctrl pin mapping code from driver and
address this through standard property "gpio-ranges".

Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c

index 1ca783098e47463bd3c9a5f267f5fb00eb68ef88..12a48f498b75847926ab7bc96ecd78fdd248971a 100644 (file)
@@ -29,7 +29,6 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
 
@@ -596,127 +595,6 @@ static const struct pinconf_ops cygnus_pconf_ops = {
        .pin_config_set = cygnus_pin_config_set,
 };
 
-/*
- * Map a GPIO in the local gpio_chip pin space to a pin in the Cygnus IOMUX
- * pinctrl pin space
- */
-struct cygnus_gpio_pin_range {
-       unsigned offset;
-       unsigned pin_base;
-       unsigned num_pins;
-};
-
-#define CYGNUS_PINRANGE(o, p, n) { .offset = o, .pin_base = p, .num_pins = n }
-
-/*
- * Pin mapping table for mapping local GPIO pins to Cygnus IOMUX pinctrl pins
- */
-static const struct cygnus_gpio_pin_range cygnus_gpio_pintable[] = {
-       CYGNUS_PINRANGE(0, 42, 1),
-       CYGNUS_PINRANGE(1, 44, 3),
-       CYGNUS_PINRANGE(4, 48, 1),
-       CYGNUS_PINRANGE(5, 50, 3),
-       CYGNUS_PINRANGE(8, 126, 1),
-       CYGNUS_PINRANGE(9, 155, 1),
-       CYGNUS_PINRANGE(10, 152, 1),
-       CYGNUS_PINRANGE(11, 154, 1),
-       CYGNUS_PINRANGE(12, 153, 1),
-       CYGNUS_PINRANGE(13, 127, 3),
-       CYGNUS_PINRANGE(16, 140, 1),
-       CYGNUS_PINRANGE(17, 145, 7),
-       CYGNUS_PINRANGE(24, 130, 10),
-       CYGNUS_PINRANGE(34, 141, 4),
-       CYGNUS_PINRANGE(38, 54, 1),
-       CYGNUS_PINRANGE(39, 56, 3),
-       CYGNUS_PINRANGE(42, 60, 3),
-       CYGNUS_PINRANGE(45, 64, 3),
-       CYGNUS_PINRANGE(48, 68, 2),
-       CYGNUS_PINRANGE(50, 84, 6),
-       CYGNUS_PINRANGE(56, 94, 6),
-       CYGNUS_PINRANGE(62, 72, 1),
-       CYGNUS_PINRANGE(63, 70, 1),
-       CYGNUS_PINRANGE(64, 80, 1),
-       CYGNUS_PINRANGE(65, 74, 3),
-       CYGNUS_PINRANGE(68, 78, 1),
-       CYGNUS_PINRANGE(69, 82, 1),
-       CYGNUS_PINRANGE(70, 156, 17),
-       CYGNUS_PINRANGE(87, 104, 12),
-       CYGNUS_PINRANGE(99, 102, 2),
-       CYGNUS_PINRANGE(101, 90, 4),
-       CYGNUS_PINRANGE(105, 116, 6),
-       CYGNUS_PINRANGE(111, 100, 2),
-       CYGNUS_PINRANGE(113, 122, 4),
-       CYGNUS_PINRANGE(123, 11, 1),
-       CYGNUS_PINRANGE(124, 38, 4),
-       CYGNUS_PINRANGE(128, 43, 1),
-       CYGNUS_PINRANGE(129, 47, 1),
-       CYGNUS_PINRANGE(130, 49, 1),
-       CYGNUS_PINRANGE(131, 53, 1),
-       CYGNUS_PINRANGE(132, 55, 1),
-       CYGNUS_PINRANGE(133, 59, 1),
-       CYGNUS_PINRANGE(134, 63, 1),
-       CYGNUS_PINRANGE(135, 67, 1),
-       CYGNUS_PINRANGE(136, 71, 1),
-       CYGNUS_PINRANGE(137, 73, 1),
-       CYGNUS_PINRANGE(138, 77, 1),
-       CYGNUS_PINRANGE(139, 79, 1),
-       CYGNUS_PINRANGE(140, 81, 1),
-       CYGNUS_PINRANGE(141, 83, 1),
-       CYGNUS_PINRANGE(142, 10, 1)
-};
-
-/*
- * The Cygnus IOMUX controller mainly supports group based mux configuration,
- * but certain pins can be muxed to GPIO individually. Only the ASIU GPIO
- * controller can support this, so it's an optional configuration
- *
- * Return -ENODEV means no support and that's fine
- */
-static int cygnus_gpio_pinmux_add_range(struct cygnus_gpio *chip)
-{
-       struct device_node *node = chip->dev->of_node;
-       struct device_node *pinmux_node;
-       struct platform_device *pinmux_pdev;
-       struct gpio_chip *gc = &chip->gc;
-       int i, ret = 0;
-
-       /* parse DT to find the phandle to the pinmux controller */
-       pinmux_node = of_parse_phandle(node, "pinmux", 0);
-       if (!pinmux_node)
-               return -ENODEV;
-
-       pinmux_pdev = of_find_device_by_node(pinmux_node);
-       /* no longer need the pinmux node */
-       of_node_put(pinmux_node);
-       if (!pinmux_pdev) {
-               dev_err(chip->dev, "failed to get pinmux device\n");
-               return -EINVAL;
-       }
-
-       /* now need to create the mapping between local GPIO and PINMUX pins */
-       for (i = 0; i < ARRAY_SIZE(cygnus_gpio_pintable); i++) {
-               ret = gpiochip_add_pin_range(gc, dev_name(&pinmux_pdev->dev),
-                                            cygnus_gpio_pintable[i].offset,
-                                            cygnus_gpio_pintable[i].pin_base,
-                                            cygnus_gpio_pintable[i].num_pins);
-               if (ret) {
-                       dev_err(chip->dev, "unable to add GPIO pin range\n");
-                       goto err_put_device;
-               }
-       }
-
-       chip->pinmux_is_supported = true;
-
-       /* no need for pinmux_pdev device reference anymore */
-       put_device(&pinmux_pdev->dev);
-       return 0;
-
-err_put_device:
-       put_device(&pinmux_pdev->dev);
-       gpiochip_remove_pin_ranges(gc);
-       return ret;
-}
-
 /*
  * Cygnus GPIO controller supports some PINCONF related configurations such as
  * pull up, pull down, and drive strength, when the pin is configured to GPIO
@@ -851,18 +729,15 @@ static int cygnus_gpio_probe(struct platform_device *pdev)
        gc->set = cygnus_gpio_set;
        gc->get = cygnus_gpio_get;
 
+       chip->pinmux_is_supported = of_property_read_bool(dev->of_node,
+                                                       "gpio-ranges");
+
        ret = gpiochip_add(gc);
        if (ret < 0) {
                dev_err(dev, "unable to add GPIO chip\n");
                return ret;
        }
 
-       ret = cygnus_gpio_pinmux_add_range(chip);
-       if (ret && ret != -ENODEV) {
-               dev_err(dev, "unable to add GPIO pin range\n");
-               goto err_rm_gpiochip;
-       }
-
        ret = cygnus_gpio_register_pinconf(chip);
        if (ret) {
                dev_err(dev, "unable to register pinconf\n");