--- /dev/null
+/* linux/arch/arm/mach-s5pv210/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/map.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+/* GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in v210.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
+ {
+ .chip = {
+ .base = S5PV210_GPA0(0),
+ .ngpio = S5PV210_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPA1(0),
+ .ngpio = S5PV210_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPB(0),
+ .ngpio = S5PV210_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPC0(0),
+ .ngpio = S5PV210_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPC1(0),
+ .ngpio = S5PV210_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPD0(0),
+ .ngpio = S5PV210_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPD1(0),
+ .ngpio = S5PV210_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPE0(0),
+ .ngpio = S5PV210_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPE1(0),
+ .ngpio = S5PV210_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF0(0),
+ .ngpio = S5PV210_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF1(0),
+ .ngpio = S5PV210_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF2(0),
+ .ngpio = S5PV210_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF3(0),
+ .ngpio = S5PV210_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG0(0),
+ .ngpio = S5PV210_GPIO_G0_NR,
+ .label = "GPG0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG1(0),
+ .ngpio = S5PV210_GPIO_G1_NR,
+ .label = "GPG1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG2(0),
+ .ngpio = S5PV210_GPIO_G2_NR,
+ .label = "GPG2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG3(0),
+ .ngpio = S5PV210_GPIO_G3_NR,
+ .label = "GPG3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPI(0),
+ .ngpio = S5PV210_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ0(0),
+ .ngpio = S5PV210_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ1(0),
+ .ngpio = S5PV210_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ2(0),
+ .ngpio = S5PV210_GPIO_J2_NR,
+ .label = "GPJ2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ3(0),
+ .ngpio = S5PV210_GPIO_J3_NR,
+ .label = "GPJ3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ4(0),
+ .ngpio = S5PV210_GPIO_J4_NR,
+ .label = "GPJ4",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_MP01(0),
+ .ngpio = S5PV210_GPIO_MP01_NR,
+ .label = "MP01",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_MP02(0),
+ .ngpio = S5PV210_GPIO_MP02_NR,
+ .label = "MP02",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_MP03(0),
+ .ngpio = S5PV210_GPIO_MP03_NR,
+ .label = "MP03",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC00),
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_GPH0(0),
+ .ngpio = S5PV210_GPIO_H0_NR,
+ .label = "GPH0",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC20),
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_GPH1(0),
+ .ngpio = S5PV210_GPIO_H1_NR,
+ .label = "GPH1",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC40),
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_GPH2(0),
+ .ngpio = S5PV210_GPIO_H2_NR,
+ .label = "GPH2",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC60),
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_GPH3(0),
+ .ngpio = S5PV210_GPIO_H3_NR,
+ .label = "GPH3",
+ },
+ },
+};
+
+static __init int s5pv210_gpiolib_init(void)
+{
+ struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
+ int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
+ int i = 0;
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL)
+ chip->config = &gpio_cfg;
+ if (chip->base == NULL)
+ chip->base = S5PV210_BANK_BASE(i);
+ }
+
+ samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
+
+ return 0;
+}
+core_initcall(s5pv210_gpiolib_init);
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
+/* Practically, GPIO banks upto MP03 are the configurable gpio banks */
+
/* GPIO bank sizes */
#define S5PV210_GPIO_A0_NR (8)
#define S5PV210_GPIO_A1_NR (4)
#define S5PV210_GPIO_J3_NR (8)
#define S5PV210_GPIO_J4_NR (5)
+#define S5PV210_GPIO_MP01_NR (8)
+#define S5PV210_GPIO_MP02_NR (4)
+#define S5PV210_GPIO_MP03_NR (8)
+
/* GPIO bank numbers */
/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+ S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
+ S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
+ S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
};
/* S5PV210 GPIO number definitions */
#define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr))
#define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr))
#define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr))
+#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr))
+#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr))
+#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr))
/* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1)
+#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
#define S3C_GPIO_END S5PV210_GPIO_END
-/* define the number of gpios we need to the one after the GPJ4() range */
-#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \
+/* define the number of gpios we need to the one after the MP03() range */
+#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
#include <asm-generic/gpio.h>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff