4.1.2 RAW socket option CAN_RAW_ERR_FILTER
4.1.3 RAW socket option CAN_RAW_LOOPBACK
4.1.4 RAW socket option CAN_RAW_RECV_OWN_MSGS
- 4.1.5 RAW socket returned message flags
+ 4.1.5 RAW socket option CAN_RAW_FD_FRAMES
+ 4.1.6 RAW socket returned message flags
4.2 Broadcast Manager protocol sockets (SOCK_DGRAM)
4.3 connected transport protocols (SOCK_SEQPACKET)
4.4 unconnected transport protocols (SOCK_DGRAM)
6.5.1 Netlink interface to set/get devices properties
6.5.2 Setting the CAN bit-timing
6.5.3 Starting and stopping the CAN network device
- 6.6 supported CAN hardware
+ 6.6 CAN FD (flexible data rate) driver support
+ 6.7 supported CAN hardware
7 Socket CAN resources
struct can_frame {
canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */
- __u8 can_dlc; /* data length code: 0 .. 8 */
+ __u8 can_dlc; /* frame payload length in byte (0 .. 8) */
__u8 data[8] __attribute__((aligned(8)));
};
nbytes = sendto(s, &frame, sizeof(struct can_frame),
0, (struct sockaddr*)&addr, sizeof(addr));
+ Remark about CAN FD (flexible data rate) support:
+
+ Generally the handling of CAN FD is very similar to the formerly described
+ examples. The new CAN FD capable CAN controllers support two different
+ bitrates for the arbitration phase and the payload phase of the CAN FD frame
+ and up to 64 bytes of payload. This extended payload length breaks all the
+ kernel interfaces (ABI) which heavily rely on the CAN frame with fixed eight
+ bytes of payload (struct can_frame) like the CAN_RAW socket. Therefore e.g.
+ the CAN_RAW socket supports a new socket option CAN_RAW_FD_FRAMES that
+ switches the socket into a mode that allows the handling of CAN FD frames
+ and (legacy) CAN frames simultaneously (see section 4.1.5).
+
+ The struct canfd_frame is defined in include/linux/can.h:
+
+ struct canfd_frame {
+ canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */
+ __u8 len; /* frame payload length in byte (0 .. 64) */
+ __u8 flags; /* additional flags for CAN FD */
+ __u8 __res0; /* reserved / padding */
+ __u8 __res1; /* reserved / padding */
+ __u8 data[64] __attribute__((aligned(8)));
+ };
+
+ The struct canfd_frame and the existing struct can_frame have the can_id,
+ the payload length and the payload data at the same offset inside their
+ structures. This allows to handle the different structures very similar.
+ When the content of a struct can_frame is copied into a struct canfd_frame
+ all structure elements can be used as-is - only the data[] becomes extended.
+
+ When introducing the struct canfd_frame it turned out that the data length
+ code (DLC) of the struct can_frame was used as a length information as the
+ length and the DLC has a 1:1 mapping in the range of 0 .. 8. To preserve
+ the easy handling of the length information the canfd_frame.len element
+ contains a plain length value from 0 .. 64. So both canfd_frame.len and
+ can_frame.can_dlc are equal and contain a length information and no DLC.
+ For details about the distinction of CAN and CAN FD capable devices and
+ the mapping to the bus-relevant data length code (DLC), see chapter 6.6.
+
+ The length of the two CAN(FD) frame structures define the maximum transfer
+ unit (MTU) of the CAN(FD) network interface and skbuff data length. Two
+ definitions are specified for CAN specific MTUs in include/linux/can.h :
+
+ #define CAN_MTU (sizeof(struct can_frame)) == 16 => 'legacy' CAN frame
+ #define CANFD_MTU (sizeof(struct canfd_frame)) == 72 => CAN FD frame
+
4.1 RAW protocol sockets with can_filters (SOCK_RAW)
Using CAN_RAW sockets is extensively comparable to the commonly
setsockopt(s, SOL_CAN_RAW, CAN_RAW_RECV_OWN_MSGS,
&recv_own_msgs, sizeof(recv_own_msgs));
- 4.1.5 RAW socket returned message flags
+ 4.1.5 RAW socket option CAN_RAW_FD_FRAMES
+
+ CAN FD support in CAN_RAW sockets can be enabled with a new socket option
+ CAN_RAW_FD_FRAMES which is off by default. When the new socket option is
+ not supported by the CAN_RAW socket (e.g. on older kernels), switching the
+ CAN_RAW_FD_FRAMES option returns the error -ENOPROTOOPT.
+
+ Once CAN_RAW_FD_FRAMES is enabled the application can send both CAN frames
+ and CAN FD frames. OTOH the application has to handle CAN and CAN FD frames
+ when reading from the socket.
+
+ CAN_RAW_FD_FRAMES enabled: CAN_MTU and CANFD_MTU are allowed
+ CAN_RAW_FD_FRAMES disabled: only CAN_MTU is allowed (default)
+
+ Example:
+ [ remember: CANFD_MTU == sizeof(struct canfd_frame) ]
+
+ struct canfd_frame cfd;
+
+ nbytes = read(s, &cfd, CANFD_MTU);
+
+ if (nbytes == CANFD_MTU) {
+ printf("got CAN FD frame with length %d\n", cfd.len);
+ /* cfd.flags contains valid data */
+ } else if (nbytes == CAN_MTU) {
+ printf("got legacy CAN frame with length %d\n", cfd.len);
+ /* cfd.flags is undefined */
+ } else {
+ fprintf(stderr, "read: invalid CAN(FD) frame\n");
+ return 1;
+ }
+
+ /* the content can be handled independently from the received MTU size */
+
+ printf("can_id: %X data length: %d data: ", cfd.can_id, cfd.len);
+ for (i = 0; i < cfd.len; i++)
+ printf("%02X ", cfd.data[i]);
+
+ When reading with size CANFD_MTU only returns CAN_MTU bytes that have
+ been received from the socket a legacy CAN frame has been read into the
+ provided CAN FD structure. Note that the canfd_frame.flags data field is
+ not specified in the struct can_frame and therefore it is only valid in
+ CANFD_MTU sized CAN FD frames.
+
+ As long as the payload length is <=8 the received CAN frames from CAN FD
+ capable CAN devices can be received and read by legacy sockets too. When
+ user-generated CAN FD frames have a payload length <=8 these can be send
+ by legacy CAN network interfaces too. Sending CAN FD frames with payload
+ length > 8 to a legacy CAN network interface returns an -EMSGSIZE error.
+
+ Implementation hint for new CAN applications:
+
+ To build a CAN FD aware application use struct canfd_frame as basic CAN
+ data structure for CAN_RAW based applications. When the application is
+ executed on an older Linux kernel and switching the CAN_RAW_FD_FRAMES
+ socket option returns an error: No problem. You'll get legacy CAN frames
+ or CAN FD frames and can process them the same way.
+
+ When sending to CAN devices make sure that the device is capable to handle
+ CAN FD frames by checking if the device maximum transfer unit is CANFD_MTU.
+ The CAN device MTU can be retrieved e.g. with a SIOCGIFMTU ioctl() syscall.
+
+ 4.1.6 RAW socket returned message flags
When using recvmsg() call, the msg->msg_flags may contain following flags:
dev->type = ARPHRD_CAN; /* the netdevice hardware type */
dev->flags = IFF_NOARP; /* CAN has no arp */
- dev->mtu = sizeof(struct can_frame);
+ dev->mtu = CAN_MTU; /* sizeof(struct can_frame) -> legacy CAN interface */
- The struct can_frame is the payload of each socket buffer in the
- protocol family PF_CAN.
+ or alternative, when the controller supports CAN with flexible data rate:
+ dev->mtu = CANFD_MTU; /* sizeof(struct canfd_frame) -> CAN FD interface */
+
+ The struct can_frame or struct canfd_frame is the payload of each socket
+ buffer (skbuff) in the protocol family PF_CAN.
6.2 local loopback of sent frames
Note that a restart will also create a CAN error message frame (see
also chapter 3.4).
- 6.6 Supported CAN hardware
+ 6.6 CAN FD (flexible data rate) driver support
+
+ CAN FD capable CAN controllers support two different bitrates for the
+ arbitration phase and the payload phase of the CAN FD frame. Therefore a
+ second bittiming has to be specified in order to enable the CAN FD bitrate.
+
+ Additionally CAN FD capable CAN controllers support up to 64 bytes of
+ payload. The representation of this length in can_frame.can_dlc and
+ canfd_frame.len for userspace applications and inside the Linux network
+ layer is a plain value from 0 .. 64 instead of the CAN 'data length code'.
+ The data length code was a 1:1 mapping to the payload length in the legacy
+ CAN frames anyway. The payload length to the bus-relevant DLC mapping is
+ only performed inside the CAN drivers, preferably with the helper
+ functions can_dlc2len() and can_len2dlc().
+
+ The CAN netdevice driver capabilities can be distinguished by the network
+ devices maximum transfer unit (MTU):
+
+ MTU = 16 (CAN_MTU) => sizeof(struct can_frame) => 'legacy' CAN device
+ MTU = 72 (CANFD_MTU) => sizeof(struct canfd_frame) => CAN FD capable device
+
+ The CAN device MTU can be retrieved e.g. with a SIOCGIFMTU ioctl() syscall.
+ N.B. CAN FD capable devices can also handle and send legacy CAN frames.
+
+ FIXME: Add details about the CAN FD controller configuration when available.
+
+ 6.7 Supported CAN hardware
Please check the "Kconfig" file in "drivers/net/can" to get an actual
list of the support CAN hardware. On the Socket CAN project website
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff