[SCSI] mvsas: get phy info.
authorKe Wei <kewei@marvell.com>
Thu, 27 Mar 2008 06:55:33 +0000 (14:55 +0800)
committerJames Bottomley <James.Bottomley@HansenPartnership.com>
Fri, 28 Mar 2008 17:32:09 +0000 (12:32 -0500)
removed unused code and attached SATA address makes use of port id.
enable HBA interrupt after calling sas_register_ha();

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
drivers/scsi/mvsas.c

index 761beebcb8717c35c441df74fb8f9a4d3e8d46dc..b5de3d0d3f31902ab8e09523fe0e1bfe732fd0bb 100644 (file)
@@ -2743,7 +2743,7 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
 {
        struct mvs_phy *phy = &mvi->phy[i];
        struct pci_dev *pdev = mvi->pdev;
-       u32 tmp, j;
+       u32 tmp;
        u64 tmp64;
 
        mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
@@ -2770,46 +2770,20 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
                sas_phy->linkrate =
                        (phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
                                PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
-
-               /* Updated attached_sas_addr */
-               mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
-               phy->att_dev_sas_addr =
-                               (u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
-               mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
-               phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
-               dev_printk(KERN_DEBUG, &pdev->dev,
-                       "phy[%d] Get Attached Address 0x%llX ,"
-                       " SAS Address 0x%llX\n",
-                       i, phy->att_dev_sas_addr, phy->dev_sas_addr);
-               dev_printk(KERN_DEBUG, &pdev->dev,
-                       "Rate = %x , type = %d\n",
-                       sas_phy->linkrate, phy->phy_type);
-
-#if 1
-               /*
-               * If the device is capable of supporting a wide port
-               * on its phys, it may configure the phys as a wide port.
-               */
-               if (phy->phy_type & PORT_TYPE_SAS)
-                       for (j = 0; j < mvi->chip->n_phy && j != i; ++j) {
-                               if ((mvi->phy[j].phy_attached) &&
-                                       (mvi->phy[j].phy_type & PORT_TYPE_SAS))
-                                       if (phy->att_dev_sas_addr ==
-                                       mvi->phy[j].att_dev_sas_addr - 1) {
-                                               phy->att_dev_sas_addr =
-                                               mvi->phy[j].att_dev_sas_addr;
-                                               break;
-                                       }
-                       }
-
-#endif
-
-               tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
-               memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+               phy->minimum_linkrate =
+                       (phy->phy_status &
+                               PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+               phy->maximum_linkrate =
+                       (phy->phy_status &
+                               PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
 
                if (phy->phy_type & PORT_TYPE_SAS) {
+                       /* Updated attached_sas_addr */
+                       mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+                       phy->att_dev_sas_addr =
+                               (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+                       mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+                       phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
                        mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
                        phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
                        phy->identify.device_type =
@@ -2828,6 +2802,7 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
                } else if (phy->phy_type & PORT_TYPE_SATA) {
                        phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
                        if (mvs_is_sig_fis_received(phy->irq_status)) {
+                               phy->att_dev_sas_addr = i;      /* temp */
                                if (phy_st & PHY_OOB_DTCTD)
                                        sas_phy->oob_mode = SATA_OOB_MODE;
                                phy->frame_rcvd_size =
@@ -2837,20 +2812,34 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
                        } else {
                                dev_printk(KERN_DEBUG, &pdev->dev,
                                        "No sig fis\n");
+                               phy->phy_type &= ~(PORT_TYPE_SATA);
+                               goto out_done;
                        }
                }
+               tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
+               memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+
+               dev_printk(KERN_DEBUG, &pdev->dev,
+                       "phy[%d] Get Attached Address 0x%llX ,"
+                       " SAS Address 0x%llX\n",
+                       i, phy->att_dev_sas_addr, phy->dev_sas_addr);
+               dev_printk(KERN_DEBUG, &pdev->dev,
+                       "Rate = %x , type = %d\n",
+                       sas_phy->linkrate, phy->phy_type);
+
                /* workaround for HW phy decoding error on 1.5g disk drive */
                mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
                tmp = mvs_read_port_vsr_data(mvi, i);
                if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
                     PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
                        SAS_LINK_RATE_1_5_GBPS)
-                       tmp &= ~PHY_MODE6_DTL_SPEED;
+                       tmp &= ~PHY_MODE6_LATECLK;
                else
-                       tmp |= PHY_MODE6_DTL_SPEED;
+                       tmp |= PHY_MODE6_LATECLK;
                mvs_write_port_vsr_data(mvi, i, tmp);
 
        }
+out_done:
        if (get_st)
                mvs_write_port_irq_stat(mvi, i, phy->irq_status);
 }
@@ -2875,6 +2864,11 @@ static void mvs_port_formed(struct asd_sas_phy *sas_phy)
        spin_unlock_irqrestore(&mvi->lock, flags);
 }
 
+static int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+       return TMF_RESP_FUNC_FAILED;
+}
+
 static int __devinit mvs_hw_init(struct mvs_info *mvi)
 {
        void __iomem *regs = mvi->regs;
@@ -3036,13 +3030,12 @@ static int __devinit mvs_hw_init(struct mvs_info *mvi)
        /* enable CMD/CMPL_Q/RESP mode */
        mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
 
-       /* re-enable interrupts globally */
-       mvs_hba_interrupt_enable(mvi);
-
        /* enable completion queue interrupt */
-       tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM);
+       tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
        mw32(INT_MASK, tmp);
 
+       /* Enable SRS interrupt */
+       mw32(INT_MASK_SRS, 0xFF);
        return 0;
 }
 
@@ -3116,6 +3109,8 @@ static int __devinit mvs_pci_init(struct pci_dev *pdev,
 
        mvs_print_info(mvi);
 
+       mvs_hba_interrupt_enable(mvi);
+
        scsi_scan_host(mvi->shost);
 
        return 0;
@@ -3161,7 +3156,8 @@ static struct sas_domain_function_template mvs_transport_ops = {
        .lldd_execute_task      = mvs_task_exec,
        .lldd_control_phy       = mvs_phy_control,
        .lldd_abort_task        = mvs_task_abort,
-       .lldd_port_formed       = mvs_port_formed
+       .lldd_port_formed       = mvs_port_formed,
+       .lldd_I_T_nexus_reset   = mvs_I_T_nexus_reset,
 };
 
 static struct pci_device_id __devinitdata mvs_pci_table[] = {