Bluetooth: hci_uart: Add support Broadcom address configuration

When using vendor detection, this adds support for the Broadcom
specific address configuration command.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 4356f718ea3d07faf0a73061842ea40a779eeffe..e8630b605aa93afa2ebf8dfe72ec34193a6e188b 100644 (file)
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -103,6 +103,15 @@ config BT_HCIUART_INTEL
 
          Say Y here to compile support for Intel protocol.
 
+config BT_HCIUART_BCM
+       bool "Broadcom protocol support"
+       depends on BT_HCIUART
+       help
+         The Broadcom protocol support enables Bluetooth HCI over serial
+         port interface for Broadcom Bluetooth controllers.
+
+         Say Y here to compile support for Broadcom protocol.
+
 config BT_HCIBCM203X
        tristate "HCI BCM203x USB driver"
        depends on USB

diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index adb99457d0160aac9fef10cf9f59f06b7099fc3d..51f9d0c189633c343feaa046b006bf4e436ebb8d 100644 (file)
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -30,6 +30,7 @@ hci_uart-$(CONFIG_BT_HCIUART_LL)      += hci_ll.o
 hci_uart-$(CONFIG_BT_HCIUART_ATH3K)    += hci_ath.o
 hci_uart-$(CONFIG_BT_HCIUART_3WIRE)    += hci_h5.o
 hci_uart-$(CONFIG_BT_HCIUART_INTEL)    += hci_intel.o
+hci_uart-$(CONFIG_BT_HCIUART_BCM)      += hci_bcm.o
 hci_uart-objs                          := $(hci_uart-y)
 
 ccflags-y += -D__CHECK_ENDIAN__

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
new file mode 100644 (file)
index 0000000..1a5817b
--- /dev/null
+++ b/drivers/bluetooth/hci_bcm.c
@@ -0,0 +1,48 @@
+/*
+ *
+ *  Bluetooth HCI UART driver for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+int bcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+       struct sk_buff *skb;
+       int err;
+
+       skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
+       if (IS_ERR(skb)) {
+               err = PTR_ERR(skb);
+               BT_ERR("%s: BCM: Change address command failed (%d)",
+                      hdev->name, err);
+               return err;
+       }
+       kfree_skb(skb);
+
+       return 0;
+}

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 03f9defac39d654d4ae54b51b990ba85edc0ebd7..b6d1ff4fbba6b642db5a3cad2941efcca0a167d5 100644 (file)
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -294,6 +294,11 @@ static int hci_uart_setup(struct hci_dev *hdev)
        case 2:
                hdev->set_bdaddr = intel_set_bdaddr;
                break;
+#endif
+#ifdef CONFIG_BT_HCIUART_BCM
+       case 15:
+               hdev->set_bdaddr = bcm_set_bdaddr;
+               break;
 #endif
        }
 

diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 687aa7e9eb2e11d1234f92ccea61ef61a10944f9..4dc8ab3009a961fc6ba269431c630e7e4b6fc3d1 100644 (file)
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -35,7 +35,7 @@
 #define HCIUARTGETFLAGS                _IOR('U', 204, int)
 
 /* UART protocols */
-#define HCI_UART_MAX_PROTO     7
+#define HCI_UART_MAX_PROTO     8
 
 #define HCI_UART_H4    0
 #define HCI_UART_BCSP  1
@@ -44,6 +44,7 @@
 #define HCI_UART_LL    4
 #define HCI_UART_ATH3K 5
 #define HCI_UART_INTEL 6
+#define HCI_UART_BCM   7
 
 #define HCI_UART_RAW_DEVICE    0
 #define HCI_UART_RESET_ON_INIT 1
@@ -123,3 +124,7 @@ int h5_deinit(void);
 #ifdef CONFIG_BT_HCIUART_INTEL
 int intel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 #endif
+
+#ifdef CONFIG_BT_HCIUART_BCM
+int bcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+#endif