ath9k_hw: Enable manual peak calibration for AR9485
authorSujith Manoharan <c_manoha@qca.qualcomm.com>
Thu, 16 May 2013 17:17:34 +0000 (22:47 +0530)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 17 May 2013 18:31:08 +0000 (14:31 -0400)
Manual peak calibration is currently enabled only for
AR9462 and AR9565. This is also required for AR9485.
The initvals are also modified to disable HW peak calibration.

Cc: <stable@vger.kernel.org>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/ar9003_calib.c
drivers/net/wireless/ath/ath9k/ar9485_initvals.h

index 639ba7d18ea41d14fd1ef55913c8bbc9ac7d8d42..6988e1d081f225c0c0a8efd0dc49fbacb4fc6a1a 100644 (file)
@@ -965,7 +965,7 @@ static void ar9003_hw_do_manual_peak_cal(struct ath_hw *ah,
 {
        int i;
 
-       if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah))
+       if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah))
                return;
 
        for (i = 0; i < AR9300_MAX_CHAINS; i++) {
index 712f415b8c0861165ab2a2ee74cbea853788295b..88ff1d7b53ab41c642333d553646e90065c3045b 100644 (file)
@@ -1020,7 +1020,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
        {0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
        {0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
        {0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-       {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+       {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
        {0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
        {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
        {0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},