+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P series camera interface helper functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef PLAT_S5P_CAMPORT_H_
-#define PLAT_S5P_CAMPORT_H_ __FILE__
-
-enum s5p_camport_id {
- S5P_CAMPORT_A,
- S5P_CAMPORT_B,
-};
-
-/*
- * The helper functions to configure GPIO for the camera parallel bus.
- * The camera port can be multiplexed with any FIMC entity, even multiple
- * FIMC entities are allowed to be attached to a single port simultaneously.
- * These functions are to be used in the board setup code.
- */
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_EHCI_H
-#define __PLAT_S5P_EHCI_H
-
-struct s5p_ehci_platdata {
- int (*phy_init)(struct platform_device *pdev, int type);
- int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_S5P_EHCI_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/irqs.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P Common IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_IRQS_H
-#define __ASM_PLAT_S5P_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S5P_IRQ_OFFSET (32)
-
-#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET)
-
-#define S5P_VIC0_BASE S5P_IRQ(0)
-#define S5P_VIC1_BASE S5P_IRQ(32)
-#define S5P_VIC2_BASE S5P_IRQ(64)
-#define S5P_VIC3_BASE S5P_IRQ(96)
-
-#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
-
-#define IRQ_VIC0_BASE S5P_VIC0_BASE
-#define IRQ_VIC1_BASE S5P_VIC1_BASE
-#define IRQ_VIC2_BASE S5P_VIC2_BASE
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S5P_UART_BASE0 (16)
-#define IRQ_S5P_UART_BASE1 (20)
-#define IRQ_S5P_UART_BASE2 (24)
-#define IRQ_S5P_UART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-
-#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
-
-/* S3C compatibilty defines */
-#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0
-#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1
-#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2
-#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3
-
-/* VIC based IRQs */
-
-#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
-#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x))
-#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
-#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-
-#define S5P_TIMER_IRQ(x) (11 + (x))
-
-#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
-#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
-#define IRQ_TIMER2 S5P_TIMER_IRQ(2)
-#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
-#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
-
-#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
- : ((x) - 16 + S5P_EINT_BASE2))
-
-#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \
- ((irq) - S5P_EINT_BASE1) : \
- ((irq) + 16 - S5P_EINT_BASE2))
-
-#define IRQ_EINT_BIT(x) EINT_OFFSET(x)
-
-/* Typically only a few gpio chips require gpio interrupt support.
- To avoid memory waste irq descriptors are allocated only for
- S5P_GPIOINT_GROUP_COUNT chips, each with total number of
- S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
- to any gpio chip with the s5p_register_gpio_interrupt() function */
-#define S5P_GPIOINT_GROUP_COUNT 4
-#define S5P_GPIOINT_GROUP_SIZE 8
-#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
-
-/* IRQ types common for all s5p platforms */
-#define S5P_IRQ_TYPE_LEVEL_LOW (0x00)
-#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01)
-#define S5P_IRQ_TYPE_EDGE_FALLING (0x02)
-#define S5P_IRQ_TYPE_EDGE_RISING (0x03)
-#define S5P_IRQ_TYPE_EDGE_BOTH (0x04)
-
-#endif /* __ASM_PLAT_S5P_IRQS_H */
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_MFC_H
-#define __PLAT_S5P_MFC_H
-
-/**
- * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
- * @rbase: base address for MFC 'right' memory interface
- * @rsize: size of the memory reserved for MFC 'right' interface
- * @lbase: base address for MFC 'left' memory interface
- * @lsize: size of the memory reserved for MFC 'left' interface
- *
- * This function reserves system memory for both MFC device memory
- * interfaces and registers it to respective struct device entries as
- * coherent memory.
- */
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
- phys_addr_t lbase, unsigned int lsize);
-
-#endif /* __PLAT_S5P_MFC_H */
+++ /dev/null
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef PLAT_S5P_MIPI_CSIS_H_
-#define PLAT_S5P_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- * driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
- unsigned long clk_rate;
- u8 lanes;
- u8 alignment;
- u8 hs_settle;
- bool fixed_phy_vdd;
- int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- * false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* PLAT_S5P_MIPI_CSIS_H_ */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_REGS_SROM_H
-#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_SROMREG(x) (S5P_VA_SROMC + (x))
-
-#define S5P_SROM_BW S5P_SROMREG(0x0)
-#define S5P_SROM_BC0 S5P_SROMREG(0x4)
-#define S5P_SROM_BC1 S5P_SROMREG(0x8)
-#define S5P_SROM_BC2 S5P_SROMREG(0xc)
-#define S5P_SROM_BC3 S5P_SROMREG(0x10)
-#define S5P_SROM_BC4 S5P_SROMREG(0x14)
-#define S5P_SROM_BC5 S5P_SROMREG(0x18)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5P_SROM_BW__DATAWIDTH__SHIFT 0
-#define S5P_SROM_BW__ADDRMODE__SHIFT 1
-#define S5P_SROM_BW__WAITENABLE__SHIFT 2
-#define S5P_SROM_BW__BYTEENABLE__SHIFT 3
-
-#define S5P_SROM_BW__CS_MASK 0xf
-
-#define S5P_SROM_BW__NCS0__SHIFT 0
-#define S5P_SROM_BW__NCS1__SHIFT 4
-#define S5P_SROM_BW__NCS2__SHIFT 8
-#define S5P_SROM_BW__NCS3__SHIFT 12
-#define S5P_SROM_BW__NCS4__SHIFT 16
-#define S5P_SROM_BW__NCS5__SHIFT 20
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5P_SROM_BCX__PMC__SHIFT 0
-#define S5P_SROM_BCX__TACP__SHIFT 4
-#define S5P_SROM_BCX__TCAH__SHIFT 8
-#define S5P_SROM_BCX__TCOH__SHIFT 12
-#define S5P_SROM_BCX__TACC__SHIFT 16
-#define S5P_SROM_BCX__TCOS__SHIFT 24
-#define S5P_SROM_BCX__TACS__SHIFT 28
-
-#endif /* __ASM_PLAT_S5P_REGS_SROM_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_RESET_H
-#define __ASM_PLAT_S5P_RESET_H __FILE__
-
-extern void (*s5p_reset_hook)(void);
-
-#endif /* __ASM_PLAT_S5P_RESET_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for s5p clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_CLOCK_H
-#define __ASM_PLAT_S5P_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_dpll clk_ext_xtal_mux
-#define clk_fin_vpll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-extern struct clk clk_ext_xtal_mux;
-extern struct clk clk_xusbxti;
-extern struct clk clk_48m;
-extern struct clk s5p_clk_27m;
-extern struct clk clk_fout_apll;
-extern struct clk clk_fout_mpll;
-extern struct clk clk_fout_epll;
-extern struct clk clk_fout_dpll;
-extern struct clk clk_fout_vpll;
-extern struct clk clk_arm;
-extern struct clk clk_vpll;
-
-extern struct clksrc_sources clk_src_apll;
-extern struct clksrc_sources clk_src_mpll;
-extern struct clksrc_sources clk_src_epll;
-extern struct clksrc_sources clk_src_dpll;
-
-extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
-
-/* Common EPLL operations for S5P platform */
-extern int s5p_epll_enable(struct clk *clk, int enable);
-extern unsigned long s5p_epll_get_rate(struct clk *clk);
-
-/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
-extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
-extern unsigned long s5p_spdif_get_rate(struct clk *clk);
-
-extern struct clk_ops s5p_sclk_spdif_ops;
-#endif /* __ASM_PLAT_S5P_CLOCK_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p time support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_TIME_H
-#define __ASM_PLAT_S5P_TIME_H __FILE__
-
-/* S5P HR-Timer Clock mode */
-enum s5p_timer_mode {
- S5P_PWM0,
- S5P_PWM1,
- S5P_PWM2,
- S5P_PWM3,
- S5P_PWM4,
-};
-
-struct s5p_timer_source {
- unsigned int event_id;
- unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define S5PTIMER_MIN_RANGE 4
-
-#define TCNT_MAX 0xffffffff
-#define NON_PERIODIC 0
-#define PERIODIC 1
-
-extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source);
-extern struct sys_timer s5p_timer;
-#endif /* __ASM_PLAT_S5P_TIME_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM__PLAT_SYSMMU_H
-#define __ASM__PLAT_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
- SYSMMU_PAGEFAULT,
- SYSMMU_AR_MULTIHIT,
- SYSMMU_AW_MULTIHIT,
- SYSMMU_BUSERROR,
- SYSMMU_AR_SECURITY,
- SYSMMU_AR_ACCESS,
- SYSMMU_AW_SECURITY,
- SYSMMU_AW_PROTECTION, /* 7 */
- SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- * SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- * translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- * zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
- int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/system-reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
- *
- * S5P - System define for arch_reset()
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/watchdog-reset.h>
-
-void (*s5p_reset_hook)(void);
-
-static void arch_reset(char mode, const char *cmd)
-{
- /* SWRESET support in s5p_reset_hook() */
-
- if (s5p_reset_hook)
- s5p_reset_hook();
-
- /* Perform reset using Watchdog reset
- * if there is no s5p_reset_hook()
- */
-
- arch_wdt_reset();
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_USB_PHY_H
-#define __PLAT_S5P_USB_PHY_H
-
-enum s5p_usb_phy_type {
- S5P_USB_PHY_DEVICE,
- S5P_USB_PHY_HOST,
-};
-
-extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
-extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
-
-#endif /* __PLAT_S5P_REGS_USB_PHY_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series camera interface helper functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_CAMPORT_H_
+#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
+
+enum s5p_camport_id {
+ S5P_CAMPORT_A,
+ S5P_CAMPORT_B,
+};
+
+/*
+ * The helper functions to configure GPIO for the camera parallel bus.
+ * The camera port can be multiplexed with any FIMC entity, even multiple
+ * FIMC entities are allowed to be attached to a single port simultaneously.
+ * These functions are to be used in the board setup code.
+ */
+int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
+int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
+
+#endif /* __PLAT_SAMSUNG_CAMPORT_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_EHCI_H
+#define __PLAT_SAMSUNG_EHCI_H __FILE__
+
+struct s5p_ehci_platdata {
+ int (*phy_init)(struct platform_device *pdev, int type);
+ int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
+
+#endif /* __PLAT_SAMSUNG_EHCI_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_IRQS_H
+#define __PLAT_SAMSUNG_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S5P_IRQ_OFFSET (32)
+
+#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET)
+
+#define S5P_VIC0_BASE S5P_IRQ(0)
+#define S5P_VIC1_BASE S5P_IRQ(32)
+#define S5P_VIC2_BASE S5P_IRQ(64)
+#define S5P_VIC3_BASE S5P_IRQ(96)
+
+#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
+
+#define IRQ_VIC0_BASE S5P_VIC0_BASE
+#define IRQ_VIC1_BASE S5P_VIC1_BASE
+#define IRQ_VIC2_BASE S5P_VIC2_BASE
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S5P_UART_BASE0 (16)
+#define IRQ_S5P_UART_BASE1 (20)
+#define IRQ_S5P_UART_BASE2 (24)
+#define IRQ_S5P_UART_BASE3 (28)
+
+#define UART_IRQ_RXD (0)
+#define UART_IRQ_ERR (1)
+#define UART_IRQ_TXD (2)
+
+#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0
+#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1
+#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2
+#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3
+
+/* VIC based IRQs */
+
+#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
+#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x))
+#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
+#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
+
+#define S5P_TIMER_IRQ(x) (11 + (x))
+
+#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
+#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
+#define IRQ_TIMER2 S5P_TIMER_IRQ(2)
+#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
+#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
+
+#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+ : ((x) - 16 + S5P_EINT_BASE2))
+
+#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \
+ ((irq) - S5P_EINT_BASE1) : \
+ ((irq) + 16 - S5P_EINT_BASE2))
+
+#define IRQ_EINT_BIT(x) EINT_OFFSET(x)
+
+/* Typically only a few gpio chips require gpio interrupt support.
+ To avoid memory waste irq descriptors are allocated only for
+ S5P_GPIOINT_GROUP_COUNT chips, each with total number of
+ S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
+ to any gpio chip with the s5p_register_gpio_interrupt() function */
+#define S5P_GPIOINT_GROUP_COUNT 4
+#define S5P_GPIOINT_GROUP_SIZE 8
+#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
+
+/* IRQ types common for all s5p platforms */
+#define S5P_IRQ_TYPE_LEVEL_LOW (0x00)
+#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01)
+#define S5P_IRQ_TYPE_EDGE_FALLING (0x02)
+#define S5P_IRQ_TYPE_EDGE_RISING (0x03)
+#define S5P_IRQ_TYPE_EDGE_BOTH (0x04)
+
+#endif /* __PLAT_SAMSUNG_IRQS_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_MFC_H
+#define __PLAT_SAMSUNG_MFC_H __FILE__
+
+/**
+ * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
+ * @rbase: base address for MFC 'right' memory interface
+ * @rsize: size of the memory reserved for MFC 'right' interface
+ * @lbase: base address for MFC 'left' memory interface
+ * @lsize: size of the memory reserved for MFC 'left' interface
+ *
+ * This function reserves system memory for both MFC device memory
+ * interfaces and registers it to respective struct device entries as
+ * coherent memory.
+ */
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+ phys_addr_t lbase, unsigned int lsize);
+
+#endif /* __PLAT_SAMSUNG_MFC_H */
--- /dev/null
+/*
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series MIPI CSI slave device support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
+#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
+
+struct platform_device;
+
+/**
+ * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
+ * @clk_rate: bus clock frequency
+ * @lanes: number of data lanes used
+ * @alignment: data alignment in bits
+ * @hs_settle: HS-RX settle time
+ * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
+ * driver or true in case this regulator has no enable function
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct s5p_platform_mipi_csis {
+ unsigned long clk_rate;
+ u8 lanes;
+ u8 alignment;
+ u8 hs_settle;
+ bool fixed_phy_vdd;
+ int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/**
+ * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
+ * @pdev: MIPI-CSIS platform device
+ * @on: true to enable D-PHY and deassert its reset
+ * false to disable D-PHY
+ */
+int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
+
+#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_REGS_SROM_H
+#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SROMREG(x) (S5P_VA_SROMC + (x))
+
+#define S5P_SROM_BW S5P_SROMREG(0x0)
+#define S5P_SROM_BC0 S5P_SROMREG(0x4)
+#define S5P_SROM_BC1 S5P_SROMREG(0x8)
+#define S5P_SROM_BC2 S5P_SROMREG(0xc)
+#define S5P_SROM_BC3 S5P_SROMREG(0x10)
+#define S5P_SROM_BC4 S5P_SROMREG(0x14)
+#define S5P_SROM_BC5 S5P_SROMREG(0x18)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define S5P_SROM_BW__DATAWIDTH__SHIFT 0
+#define S5P_SROM_BW__ADDRMODE__SHIFT 1
+#define S5P_SROM_BW__WAITENABLE__SHIFT 2
+#define S5P_SROM_BW__BYTEENABLE__SHIFT 3
+
+#define S5P_SROM_BW__CS_MASK 0xf
+
+#define S5P_SROM_BW__NCS0__SHIFT 0
+#define S5P_SROM_BW__NCS1__SHIFT 4
+#define S5P_SROM_BW__NCS2__SHIFT 8
+#define S5P_SROM_BW__NCS3__SHIFT 12
+#define S5P_SROM_BW__NCS4__SHIFT 16
+#define S5P_SROM_BW__NCS5__SHIFT 20
+
+/* applies to same to BCS0 - BCS3 */
+
+#define S5P_SROM_BCX__PMC__SHIFT 0
+#define S5P_SROM_BCX__TACP__SHIFT 4
+#define S5P_SROM_BCX__TCAH__SHIFT 8
+#define S5P_SROM_BCX__TCOH__SHIFT 12
+#define S5P_SROM_BCX__TACC__SHIFT 16
+#define S5P_SROM_BCX__TCOS__SHIFT 24
+#define S5P_SROM_BCX__TACS__SHIFT 28
+
+#endif /* __PLAT_SAMSUNG_REGS_SROM_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_RESET_H
+#define __PLAT_SAMSUNG_RESET_H __FILE__
+
+extern void (*s5p_reset_hook)(void);
+
+#endif /* __PLAT_SAMSUNG_RESET_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for s5p clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_CLOCK_H
+#define __ASM_PLAT_S5P_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_dpll clk_ext_xtal_mux
+#define clk_fin_vpll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_xusbxti;
+extern struct clk clk_48m;
+extern struct clk s5p_clk_27m;
+extern struct clk clk_fout_apll;
+extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_epll;
+extern struct clk clk_fout_dpll;
+extern struct clk clk_fout_vpll;
+extern struct clk clk_arm;
+extern struct clk clk_vpll;
+
+extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_epll;
+extern struct clksrc_sources clk_src_dpll;
+
+extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+
+/* Common EPLL operations for S5P platform */
+extern int s5p_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p_epll_get_rate(struct clk *clk);
+
+/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
+extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
+extern unsigned long s5p_spdif_get_rate(struct clk *clk);
+
+extern struct clk_ops s5p_sclk_spdif_ops;
+#endif /* __ASM_PLAT_S5P_CLOCK_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5p time support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_TIME_H
+#define __ASM_PLAT_S5P_TIME_H __FILE__
+
+/* S5P HR-Timer Clock mode */
+enum s5p_timer_mode {
+ S5P_PWM0,
+ S5P_PWM1,
+ S5P_PWM2,
+ S5P_PWM3,
+ S5P_PWM4,
+};
+
+struct s5p_timer_source {
+ unsigned int event_id;
+ unsigned int source_id;
+};
+
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define S5PTIMER_MIN_RANGE 4
+
+#define TCNT_MAX 0xffffffff
+#define NON_PERIODIC 0
+#define PERIODIC 1
+
+extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
+ enum s5p_timer_mode source);
+extern struct sys_timer s5p_timer;
+#endif /* __ASM_PLAT_S5P_TIME_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung System MMU driver for S5P platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_SYSMMU_H
+#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
+
+enum S5P_SYSMMU_INTERRUPT_TYPE {
+ SYSMMU_PAGEFAULT,
+ SYSMMU_AR_MULTIHIT,
+ SYSMMU_AW_MULTIHIT,
+ SYSMMU_BUSERROR,
+ SYSMMU_AR_SECURITY,
+ SYSMMU_AR_ACCESS,
+ SYSMMU_AW_SECURITY,
+ SYSMMU_AW_PROTECTION, /* 7 */
+ SYSMMU_FAULTS_NUM
+};
+
+#ifdef CONFIG_S5P_SYSTEM_MMU
+
+#include <mach/sysmmu.h>
+
+/**
+ * s5p_sysmmu_enable() - enable system mmu of ip
+ * @ips: The ip connected system mmu.
+ * #pgd: Base physical address of the 1st level page table
+ *
+ * This function enable system mmu to transfer address
+ * from virtual address to physical address
+ */
+void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
+
+/**
+ * s5p_sysmmu_disable() - disable sysmmu mmu of ip
+ * @ips: The ip connected system mmu.
+ *
+ * This function disable system mmu to transfer address
+ * from virtual address to physical address
+ */
+void s5p_sysmmu_disable(sysmmu_ips ips);
+
+/**
+ * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
+ * @ips: The ip connected system mmu.
+ * @pgd: The page table base address.
+ *
+ * This function set page table base address
+ * When system mmu transfer address from virtaul address to physical address,
+ * system mmu refer address information from page table
+ */
+void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
+
+/**
+ * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
+ * @ips: The ip connected system mmu.
+ *
+ * This function flush all TLB entry in system mmu
+ */
+void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
+
+/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
+ * @itype: type of fault.
+ * @pgtable_base: the physical address of page table base. This is 0 if @ips is
+ * SYSMMU_BUSERROR.
+ * @fault_addr: the device (virtual) address that the System MMU tried to
+ * translated. This is 0 if @ips is SYSMMU_BUSERROR.
+ * Called when interrupt occurred by the System MMUs
+ * The device drivers of peripheral devices that has a System MMU can implement
+ * a fault handler to resolve address translation fault by System MMU.
+ * The meanings of return value and parameters are described below.
+
+ * return value: non-zero if the fault is correctly resolved.
+ * zero if the fault is not handled.
+ */
+void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
+ int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
+ unsigned long pgtable_base,
+ unsigned long fault_addr));
+#else
+#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
+#define s5p_sysmmu_disable(ips) do { } while (0)
+#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
+#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
+#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
+#endif
+#endif /* __ASM_PLAT_SYSMMU_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/system-reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * S5P - System define for arch_reset()
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/watchdog-reset.h>
+
+void (*s5p_reset_hook)(void);
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* SWRESET support in s5p_reset_hook() */
+
+ if (s5p_reset_hook)
+ s5p_reset_hook();
+
+ /* Perform reset using Watchdog reset
+ * if there is no s5p_reset_hook()
+ */
+
+ arch_wdt_reset();
+}
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_USB_PHY_H
+#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
+
+enum s5p_usb_phy_type {
+ S5P_USB_PHY_DEVICE,
+ S5P_USB_PHY_HOST,
+};
+
+extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
+extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
+
+#endif /* __PLAT_SAMSUNG_USB_PHY_H */
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff