power/reset: Add a new driver to turn QNAP board power off

The QNAP NAS boxes have a microcontroller attached to the SoCs second
serial port. By sending it a simple command, it will turn the power for
the board off. This driver registers a function for pm_power_off to send
such a command.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>

diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
new file mode 100644 (file)
index 0000000..9a599d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -0,0 +1,13 @@
+* QNAP Power Off
+
+QNAP NAS devices have a microcontroller controlling the main power
+supply. This microcontroller is connected to UART1 of the Kirkwood and
+Orion5x SoCs. Sending the charactor 'A', at 19200 baud, tells the
+microcontroller to turn the power off. This driver adds a handler to
+pm_power_off which is called to turn the power off.
+
+Required Properties:
+- compatible: Should be "qnap,power-off"
+
+- reg: Address and length of the register set for UART1
+- clocks: tclk clock

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6461b489fb09f3eedbc6b3ff7b1e9b9002de920a..6453aac701c0eb67026a6d4b29a29a0ebb82272f 100644 (file)
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -13,3 +13,12 @@ config POWER_RESET_GPIO
          This driver supports turning off your board via a GPIO line.
          If your board needs a GPIO high/low to power down, say Y and
          create a binding in your devicetree.
+
+config POWER_RESET_QNAP
+       bool "QNAP power-off driver"
+       depends on OF_GPIO && POWER_RESET && PLAT_ORION
+       help
+         This driver supports turning off QNAP NAS devices by sending
+         commands to the microcontroller which controls the main power.
+
+         Say Y if you have a QNAP NAS.

diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 751488a4a0c5dbd95925c200f406aa1dfc2f8209..c4d3b2d11b9e5abf822130397bf4f27c94302175 100644 (file)
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o

diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
new file mode 100644 (file)
index 0000000..cecb317
--- /dev/null
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -0,0 +1,116 @@
+/*
+ * QNAP Turbo NAS Board power off
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the code from:
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial_reg.h>
+#include <linux/kallsyms.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#define UART1_REG(x)   (base + ((UART_##x) << 2))
+
+static void __iomem *base;
+static unsigned long tclk;
+
+static void qnap_power_off(void)
+{
+       /* 19200 baud divisor */
+       const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+
+       pr_err("%s: triggering power-off...\n", __func__);
+
+       /* hijack UART1 and reset into sane state (19200,8n1) */
+       writel(0x83, UART1_REG(LCR));
+       writel(divisor & 0xff, UART1_REG(DLL));
+       writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+       writel(0x03, UART1_REG(LCR));
+       writel(0x00, UART1_REG(IER));
+       writel(0x00, UART1_REG(FCR));
+       writel(0x00, UART1_REG(MCR));
+
+       /* send the power-off command 'A' to PIC */
+       writel('A', UART1_REG(TX));
+}
+
+static int qnap_power_off_probe(struct platform_device *pdev)
+{
+       struct resource *res;
+       struct clk *clk;
+       char symname[KSYM_NAME_LEN];
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev, "Missing resource");
+               return -EINVAL;
+       }
+
+       base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+       if (!base) {
+               dev_err(&pdev->dev, "Unable to map resource");
+               return -EINVAL;
+       }
+
+       /* We need to know tclk in order to calculate the UART divisor */
+       clk = devm_clk_get(&pdev->dev, NULL);
+       if (IS_ERR(clk)) {
+               dev_err(&pdev->dev, "Clk missing");
+               return PTR_ERR(clk);
+       }
+
+       tclk = clk_get_rate(clk);
+
+       /* Check that nothing else has already setup a handler */
+       if (pm_power_off) {
+               lookup_symbol_name((ulong)pm_power_off, symname);
+               dev_err(&pdev->dev,
+                       "pm_power_off already claimed %p %s",
+                       pm_power_off, symname);
+               return -EBUSY;
+       }
+       pm_power_off = qnap_power_off;
+
+       return 0;
+}
+
+static int qnap_power_off_remove(struct platform_device *pdev)
+{
+       pm_power_off = NULL;
+       return 0;
+}
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+       { .compatible = "qnap,power-off", },
+       {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
+static struct platform_driver qnap_power_off_driver = {
+       .probe  = qnap_power_off_probe,
+       .remove = qnap_power_off_remove,
+       .driver = {
+               .owner  = THIS_MODULE,
+               .name   = "qnap_power_off",
+               .of_match_table = of_match_ptr(qnap_power_off_of_match_table),
+       },
+};
+module_platform_driver(qnap_power_off_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("QNAP Power off driver");
+MODULE_LICENSE("GPLv2+");