ARM: OMAP: hwmod: revise deassert sequence
authorOmar Ramirez Luna <omar.luna@linaro.org>
Sun, 23 Sep 2012 23:28:21 +0000 (17:28 -0600)
committerPaul Walmsley <paul@pwsan.com>
Sun, 23 Sep 2012 23:28:21 +0000 (17:28 -0600)
For a reset sequence to complete cleanly, a module needs its
associated clocks to be enabled, otherwise the timeout check
in prcm code can print a false failure (failed to hardreset)
that occurs because the clocks aren't powered ON and the status
bit checked can't transition without them.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
arch/arm/mach-omap2/omap_hwmod.c

index 8d933528b708c55fa047503f981684d7426ecae4..21299879d2d55a540821c92cede8b0111706e986 100644 (file)
@@ -1585,6 +1585,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 {
        struct omap_hwmod_rst_info ohri;
        int ret = -EINVAL;
+       int hwsup = 0;
 
        if (!oh)
                return -EINVAL;
@@ -1596,10 +1597,46 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
        if (IS_ERR_VALUE(ret))
                return ret;
 
+       if (oh->clkdm) {
+               /*
+                * A clockdomain must be in SW_SUP otherwise reset
+                * might not be completed. The clockdomain can be set
+                * in HW_AUTO only when the module become ready.
+                */
+               hwsup = clkdm_in_hwsup(oh->clkdm);
+               ret = clkdm_hwmod_enable(oh->clkdm, oh);
+               if (ret) {
+                       WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
+                            oh->name, oh->clkdm->name, ret);
+                       return ret;
+               }
+       }
+
+       _enable_clocks(oh);
+       if (soc_ops.enable_module)
+               soc_ops.enable_module(oh);
+
        ret = soc_ops.deassert_hardreset(oh, &ohri);
+
+       if (soc_ops.disable_module)
+               soc_ops.disable_module(oh);
+       _disable_clocks(oh);
+
        if (ret == -EBUSY)
                pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
+       if (!ret) {
+               /*
+                * Set the clockdomain to HW_AUTO, assuming that the
+                * previous state was HW_AUTO.
+                */
+               if (oh->clkdm && hwsup)
+                       clkdm_allow_idle(oh->clkdm);
+       } else {
+               if (oh->clkdm)
+                       clkdm_hwmod_disable(oh->clkdm, oh);
+       }
+
        return ret;
 }