--- /dev/null
+/*
+ * kgdbts is a test suite for kgdb for the sole purpose of validating
+ * that key pieces of the kgdb internals are working properly such as
+ * HW/SW breakpoints, single stepping, and NMI.
+ *
+ * Created by: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Information about the kgdb test suite.
+ * -------------------------------------
+ *
+ * The kgdb test suite is designed as a KGDB I/O module which
+ * simulates the communications that a debugger would have with kgdb.
+ * The tests are broken up in to a line by line and referenced here as
+ * a "get" which is kgdb requesting input and "put" which is kgdb
+ * sending a response.
+ *
+ * The kgdb suite can be invoked from the kernel command line
+ * arguments system or executed dynamically at run time. The test
+ * suite uses the variable "kgdbts" to obtain the information about
+ * which tests to run and to configure the verbosity level. The
+ * following are the various characters you can use with the kgdbts=
+ * line:
+ *
+ * When using the "kgdbts=" you only choose one of the following core
+ * test types:
+ * A = Run all the core tests silently
+ * V1 = Run all the core tests with minimal output
+ * V2 = Run all the core tests in debug mode
+ *
+ * You can also specify optional tests:
+ * N## = Go to sleep with interrupts of for ## seconds
+ * to test the HW NMI watchdog
+ * F## = Break at do_fork for ## iterations
+ * S## = Break at sys_open for ## iterations
+ *
+ * NOTE: that the do_fork and sys_open tests are mutually exclusive.
+ *
+ * To invoke the kgdb test suite from boot you use a kernel start
+ * argument as follows:
+ * kgdbts=V1 kgdbwait
+ * Or if you wanted to perform the NMI test for 6 seconds and do_fork
+ * test for 100 forks, you could use:
+ * kgdbts=V1N6F100 kgdbwait
+ *
+ * The test suite can also be invoked at run time with:
+ * echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts
+ * Or as another example:
+ * echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts
+ *
+ * When developing a new kgdb arch specific implementation or
+ * using these tests for the purpose of regression testing,
+ * several invocations are required.
+ *
+ * 1) Boot with the test suite enabled by using the kernel arguments
+ * "kgdbts=V1F100 kgdbwait"
+ * ## If kgdb arch specific implementation has NMI use
+ * "kgdbts=V1N6F100
+ *
+ * 2) After the system boot run the basic test.
+ * echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts
+ *
+ * 3) Run the concurrency tests. It is best to use n+1
+ * while loops where n is the number of cpus you have
+ * in your system. The example below uses only two
+ * loops.
+ *
+ * ## This tests break points on sys_open
+ * while [ 1 ] ; do find / > /dev/null 2>&1 ; done &
+ * while [ 1 ] ; do find / > /dev/null 2>&1 ; done &
+ * echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts
+ * fg # and hit control-c
+ * fg # and hit control-c
+ * ## This tests break points on do_fork
+ * while [ 1 ] ; do date > /dev/null ; done &
+ * while [ 1 ] ; do date > /dev/null ; done &
+ * echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts
+ * fg # and hit control-c
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/kgdb.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/syscalls.h>
+#include <linux/nmi.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/delay.h>
+
+#define v1printk(a...) do { \
+ if (verbose) \
+ printk(KERN_INFO a); \
+ } while (0)
+#define v2printk(a...) do { \
+ if (verbose > 1) \
+ printk(KERN_INFO a); \
+ touch_nmi_watchdog(); \
+ } while (0)
+#define MAX_CONFIG_LEN 40
+
+static const char hexchars[] = "0123456789abcdef";
+static struct kgdb_io kgdbts_io_ops;
+static char get_buf[BUFMAX];
+static int get_buf_cnt;
+static char put_buf[BUFMAX];
+static int put_buf_cnt;
+static char scratch_buf[BUFMAX];
+static int verbose;
+static int repeat_test;
+static int test_complete;
+static int send_ack;
+static int final_ack;
+static int hw_break_val;
+static int hw_break_val2;
+#if defined(CONFIG_ARM) || defined(CONFIG_MIPS)
+static int arch_needs_sstep_emulation = 1;
+#else
+static int arch_needs_sstep_emulation;
+#endif
+static unsigned long sstep_addr;
+static int sstep_state;
+
+/* Storage for the registers, in GDB format. */
+static unsigned long kgdbts_gdb_regs[(NUMREGBYTES +
+ sizeof(unsigned long) - 1) /
+ sizeof(unsigned long)];
+static struct pt_regs kgdbts_regs;
+
+/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */
+static int configured = -1;
+
+static char config[MAX_CONFIG_LEN];
+static struct kparam_string kps = {
+ .string = config,
+ .maxlen = MAX_CONFIG_LEN,
+};
+
+static void fill_get_buf(char *buf);
+
+struct test_struct {
+ char *get;
+ char *put;
+ void (*get_handler)(char *);
+ int (*put_handler)(char *, char *);
+};
+
+struct test_state {
+ char *name;
+ struct test_struct *tst;
+ int idx;
+ int (*run_test) (int, int);
+ int (*validate_put) (char *);
+};
+
+static struct test_state ts;
+
+static int kgdbts_unreg_thread(void *ptr)
+{
+ /* Wait until the tests are complete and then ungresiter the I/O
+ * driver.
+ */
+ while (!final_ack)
+ msleep_interruptible(1500);
+
+ if (configured)
+ kgdb_unregister_io_module(&kgdbts_io_ops);
+ configured = 0;
+
+ return 0;
+}
+
+/* This is noinline such that it can be used for a single location to
+ * place a breakpoint
+ */
+static noinline void kgdbts_break_test(void)
+{
+ v2printk("kgdbts: breakpoint complete\n");
+}
+
+/* Lookup symbol info in the kernel */
+static unsigned long lookup_addr(char *arg)
+{
+ unsigned long addr = 0;
+
+ if (!strcmp(arg, "kgdbts_break_test"))
+ addr = (unsigned long)kgdbts_break_test;
+ else if (!strcmp(arg, "sys_open"))
+ addr = (unsigned long)sys_open;
+ else if (!strcmp(arg, "do_fork"))
+ addr = (unsigned long)do_fork;
+ else if (!strcmp(arg, "hw_break_val"))
+ addr = (unsigned long)&hw_break_val;
+ return addr;
+}
+
+static void break_helper(char *bp_type, char *arg, unsigned long vaddr)
+{
+ unsigned long addr;
+
+ if (arg)
+ addr = lookup_addr(arg);
+ else
+ addr = vaddr;
+
+ sprintf(scratch_buf, "%s,%lx,%i", bp_type, addr,
+ BREAK_INSTR_SIZE);
+ fill_get_buf(scratch_buf);
+}
+
+static void sw_break(char *arg)
+{
+ break_helper("Z0", arg, 0);
+}
+
+static void sw_rem_break(char *arg)
+{
+ break_helper("z0", arg, 0);
+}
+
+static void hw_break(char *arg)
+{
+ break_helper("Z1", arg, 0);
+}
+
+static void hw_rem_break(char *arg)
+{
+ break_helper("z1", arg, 0);
+}
+
+static void hw_write_break(char *arg)
+{
+ break_helper("Z2", arg, 0);
+}
+
+static void hw_rem_write_break(char *arg)
+{
+ break_helper("z2", arg, 0);
+}
+
+static void hw_access_break(char *arg)
+{
+ break_helper("Z4", arg, 0);
+}
+
+static void hw_rem_access_break(char *arg)
+{
+ break_helper("z4", arg, 0);
+}
+
+static void hw_break_val_access(void)
+{
+ hw_break_val2 = hw_break_val;
+}
+
+static void hw_break_val_write(void)
+{
+ hw_break_val++;
+}
+
+static int check_and_rewind_pc(char *put_str, char *arg)
+{
+ unsigned long addr = lookup_addr(arg);
+ int offset = 0;
+
+ kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs,
+ NUMREGBYTES);
+ gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
+ v2printk("Stopped at IP: %lx\n", instruction_pointer(&kgdbts_regs));
+#ifdef CONFIG_X86
+ /* On x86 a breakpoint stop requires it to be decremented */
+ if (addr + 1 == kgdbts_regs.ip)
+ offset = -1;
+#endif
+ if (strcmp(arg, "silent") &&
+ instruction_pointer(&kgdbts_regs) + offset != addr) {
+ printk(KERN_ERR "kgdbts: BP mismatch %lx expected %lx\n",
+ instruction_pointer(&kgdbts_regs) + offset, addr);
+ return 1;
+ }
+#ifdef CONFIG_X86
+ /* On x86 adjust the instruction pointer if needed */
+ kgdbts_regs.ip += offset;
+#endif
+ return 0;
+}
+
+static int check_single_step(char *put_str, char *arg)
+{
+ unsigned long addr = lookup_addr(arg);
+ /*
+ * From an arch indepent point of view the instruction pointer
+ * should be on a different instruction
+ */
+ kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs,
+ NUMREGBYTES);
+ gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
+ v2printk("Singlestep stopped at IP: %lx\n",
+ instruction_pointer(&kgdbts_regs));
+ if (instruction_pointer(&kgdbts_regs) == addr) {
+ printk(KERN_ERR "kgdbts: SingleStep failed at %lx\n",
+ instruction_pointer(&kgdbts_regs));
+ return 1;
+ }
+
+ return 0;
+}
+
+static void write_regs(char *arg)
+{
+ memset(scratch_buf, 0, sizeof(scratch_buf));
+ scratch_buf[0] = 'G';
+ pt_regs_to_gdb_regs(kgdbts_gdb_regs, &kgdbts_regs);
+ kgdb_mem2hex((char *)kgdbts_gdb_regs, &scratch_buf[1], NUMREGBYTES);
+ fill_get_buf(scratch_buf);
+}
+
+static void skip_back_repeat_test(char *arg)
+{
+ int go_back = simple_strtol(arg, NULL, 10);
+
+ repeat_test--;
+ if (repeat_test <= 0)
+ ts.idx++;
+ else
+ ts.idx -= go_back;
+ fill_get_buf(ts.tst[ts.idx].get);
+}
+
+static int got_break(char *put_str, char *arg)
+{
+ test_complete = 1;
+ if (!strncmp(put_str+1, arg, 2)) {
+ if (!strncmp(arg, "T0", 2))
+ test_complete = 2;
+ return 0;
+ }
+ return 1;
+}
+
+static void emul_sstep_get(char *arg)
+{
+ if (!arch_needs_sstep_emulation) {
+ fill_get_buf(arg);
+ return;
+ }
+ switch (sstep_state) {
+ case 0:
+ v2printk("Emulate single step\n");
+ /* Start by looking at the current PC */
+ fill_get_buf("g");
+ break;
+ case 1:
+ /* set breakpoint */
+ break_helper("Z0", 0, sstep_addr);
+ break;
+ case 2:
+ /* Continue */
+ fill_get_buf("c");
+ break;
+ case 3:
+ /* Clear breakpoint */
+ break_helper("z0", 0, sstep_addr);
+ break;
+ default:
+ printk(KERN_ERR "kgdbts: ERROR failed sstep get emulation\n");
+ }
+ sstep_state++;
+}
+
+static int emul_sstep_put(char *put_str, char *arg)
+{
+ if (!arch_needs_sstep_emulation) {
+ if (!strncmp(put_str+1, arg, 2))
+ return 0;
+ return 1;
+ }
+ switch (sstep_state) {
+ case 1:
+ /* validate the "g" packet to get the IP */
+ kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs,
+ NUMREGBYTES);
+ gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
+ v2printk("Stopped at IP: %lx\n",
+ instruction_pointer(&kgdbts_regs));
+ /* Want to stop at IP + break instruction size by default */
+ sstep_addr = instruction_pointer(&kgdbts_regs) +
+ BREAK_INSTR_SIZE;
+ break;
+ case 2:
+ if (strncmp(put_str, "$OK", 3)) {
+ printk(KERN_ERR "kgdbts: failed sstep break set\n");
+ return 1;
+ }
+ break;
+ case 3:
+ if (strncmp(put_str, "$T0", 3)) {
+ printk(KERN_ERR "kgdbts: failed continue sstep\n");
+ return 1;
+ }
+ break;
+ case 4:
+ if (strncmp(put_str, "$OK", 3)) {
+ printk(KERN_ERR "kgdbts: failed sstep break unset\n");
+ return 1;
+ }
+ /* Single step is complete so continue on! */
+ sstep_state = 0;
+ return 0;
+ default:
+ printk(KERN_ERR "kgdbts: ERROR failed sstep put emulation\n");
+ }
+
+ /* Continue on the same test line until emulation is complete */
+ ts.idx--;
+ return 0;
+}
+
+static int final_ack_set(char *put_str, char *arg)
+{
+ if (strncmp(put_str+1, arg, 2))
+ return 1;
+ final_ack = 1;
+ return 0;
+}
+/*
+ * Test to plant a breakpoint and detach, which should clear out the
+ * breakpoint and restore the original instruction.
+ */
+static struct test_struct plant_and_detach_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "", "" },
+};
+
+/*
+ * Simple test to write in a software breakpoint, check for the
+ * correct stop location and detach.
+ */
+static struct test_struct sw_breakpoint_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs },
+ { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+/*
+ * Test a known bad memory read location to test the fault handler and
+ * read bytes 1-8 at the bad address
+ */
+static struct test_struct bad_read_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "m0,1", "E*" }, /* read 1 byte at address 1 */
+ { "m0,2", "E*" }, /* read 1 byte at address 2 */
+ { "m0,3", "E*" }, /* read 1 byte at address 3 */
+ { "m0,4", "E*" }, /* read 1 byte at address 4 */
+ { "m0,5", "E*" }, /* read 1 byte at address 5 */
+ { "m0,6", "E*" }, /* read 1 byte at address 6 */
+ { "m0,7", "E*" }, /* read 1 byte at address 7 */
+ { "m0,8", "E*" }, /* read 1 byte at address 8 */
+ { "D", "OK" }, /* Detach which removes all breakpoints and continues */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a breakpoint, remove it, single step, plant it
+ * again and detach.
+ */
+static struct test_struct singlestep_break_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs }, /* Write registers */
+ { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
+ { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
+ { "g", "kgdbts_break_test", 0, check_single_step },
+ { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs }, /* Write registers */
+ { "D", "OK" }, /* Remove all breakpoints and continues */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a breakpoint at do_fork for what ever the number
+ * of iterations required by the variable repeat_test.
+ */
+static struct test_struct do_fork_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "do_fork", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "do_fork", 0, check_and_rewind_pc }, /* check location */
+ { "write", "OK", write_regs }, /* Write registers */
+ { "do_fork", "OK", sw_rem_break }, /*remove breakpoint */
+ { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
+ { "g", "do_fork", 0, check_single_step },
+ { "do_fork", "OK", sw_break, }, /* set sw breakpoint */
+ { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
+ { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */
+ { "", "" },
+};
+
+/* Test for hitting a breakpoint at sys_open for what ever the number
+ * of iterations required by the variable repeat_test.
+ */
+static struct test_struct sys_open_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "sys_open", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "sys_open", 0, check_and_rewind_pc }, /* check location */
+ { "write", "OK", write_regs }, /* Write registers */
+ { "sys_open", "OK", sw_rem_break }, /*remove breakpoint */
+ { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
+ { "g", "sys_open", 0, check_single_step },
+ { "sys_open", "OK", sw_break, }, /* set sw breakpoint */
+ { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
+ { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a simple hw breakpoint
+ */
+static struct test_struct hw_breakpoint_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "kgdbts_break_test", "OK", hw_break, }, /* set hw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs },
+ { "kgdbts_break_test", "OK", hw_rem_break }, /*remove breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a hw write breakpoint
+ */
+static struct test_struct hw_write_break_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "hw_break_val", "OK", hw_write_break, }, /* set hw breakpoint */
+ { "c", "T0*", 0, got_break }, /* Continue */
+ { "g", "silent", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs },
+ { "hw_break_val", "OK", hw_rem_write_break }, /*remove breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a hw access breakpoint
+ */
+static struct test_struct hw_access_break_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "hw_break_val", "OK", hw_access_break, }, /* set hw breakpoint */
+ { "c", "T0*", 0, got_break }, /* Continue */
+ { "g", "silent", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs },
+ { "hw_break_val", "OK", hw_rem_access_break }, /*remove breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a hw access breakpoint
+ */
+static struct test_struct nmi_sleep_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "c", "T0*", 0, got_break }, /* Continue */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+static void fill_get_buf(char *buf)
+{
+ unsigned char checksum = 0;
+ int count = 0;
+ char ch;
+
+ strcpy(get_buf, "$");
+ strcat(get_buf, buf);
+ while ((ch = buf[count])) {
+ checksum += ch;
+ count++;
+ }
+ strcat(get_buf, "#");
+ get_buf[count + 2] = hexchars[checksum >> 4];
+ get_buf[count + 3] = hexchars[checksum & 0xf];
+ get_buf[count + 4] = '\0';
+ v2printk("get%i: %s\n", ts.idx, get_buf);
+}
+
+static int validate_simple_test(char *put_str)
+{
+ char *chk_str;
+
+ if (ts.tst[ts.idx].put_handler)
+ return ts.tst[ts.idx].put_handler(put_str,
+ ts.tst[ts.idx].put);
+
+ chk_str = ts.tst[ts.idx].put;
+ if (*put_str == '$')
+ put_str++;
+
+ while (*chk_str != '\0' && *put_str != '\0') {
+ /* If someone does a * to match the rest of the string, allow
+ * it, or stop if the recieved string is complete.
+ */
+ if (*put_str == '#' || *chk_str == '*')
+ return 0;
+ if (*put_str != *chk_str)
+ return 1;
+
+ chk_str++;
+ put_str++;
+ }
+ if (*chk_str == '\0' && (*put_str == '\0' || *put_str == '#'))
+ return 0;
+
+ return 1;
+}
+
+static int run_simple_test(int is_get_char, int chr)
+{
+ int ret = 0;
+ if (is_get_char) {
+ /* Send an ACK on the get if a prior put completed and set the
+ * send ack variable
+ */
+ if (send_ack) {
+ send_ack = 0;
+ return '+';
+ }
+ /* On the first get char, fill the transmit buffer and then
+ * take from the get_string.
+ */
+ if (get_buf_cnt == 0) {
+ if (ts.tst[ts.idx].get_handler)
+ ts.tst[ts.idx].get_handler(ts.tst[ts.idx].get);
+ else
+ fill_get_buf(ts.tst[ts.idx].get);
+ }
+
+ if (get_buf[get_buf_cnt] == '\0') {
+ printk(KERN_ERR
+ "kgdbts: ERROR GET: end of buffer on '%s' at %i\n",
+ ts.name, ts.idx);
+ get_buf_cnt = 0;
+ fill_get_buf("D");
+ }
+ ret = get_buf[get_buf_cnt];
+ get_buf_cnt++;
+ return ret;
+ }
+
+ /* This callback is a put char which is when kgdb sends data to
+ * this I/O module.
+ */
+ if (ts.tst[ts.idx].get[0] == '\0' &&
+ ts.tst[ts.idx].put[0] == '\0') {
+ printk(KERN_ERR "kgdbts: ERROR: beyond end of test on"
+ " '%s' line %i\n", ts.name, ts.idx);
+ return 0;
+ }
+
+ if (put_buf_cnt >= BUFMAX) {
+ printk(KERN_ERR "kgdbts: ERROR: put buffer overflow on"
+ " '%s' line %i\n", ts.name, ts.idx);
+ put_buf_cnt = 0;
+ return 0;
+ }
+ /* Ignore everything until the first valid packet start '$' */
+ if (put_buf_cnt == 0 && chr != '$')
+ return 0;
+
+ put_buf[put_buf_cnt] = chr;
+ put_buf_cnt++;
+
+ /* End of packet == #XX so look for the '#' */
+ if (put_buf_cnt > 3 && put_buf[put_buf_cnt - 3] == '#') {
+ put_buf[put_buf_cnt] = '\0';
+ v2printk("put%i: %s\n", ts.idx, put_buf);
+ /* Trigger check here */
+ if (ts.validate_put && ts.validate_put(put_buf)) {
+ printk(KERN_ERR "kgdbts: ERROR PUT: end of test "
+ "buffer on '%s' line %i expected %s got %s\n",
+ ts.name, ts.idx, ts.tst[ts.idx].put, put_buf);
+ }
+ ts.idx++;
+ put_buf_cnt = 0;
+ get_buf_cnt = 0;
+ send_ack = 1;
+ }
+ return 0;
+}
+
+static void init_simple_test(void)
+{
+ memset(&ts, 0, sizeof(ts));
+ ts.run_test = run_simple_test;
+ ts.validate_put = validate_simple_test;
+}
+
+static void run_plant_and_detach_test(int is_early)
+{
+ char before[BREAK_INSTR_SIZE];
+ char after[BREAK_INSTR_SIZE];
+
+ probe_kernel_read(before, (char *)kgdbts_break_test,
+ BREAK_INSTR_SIZE);
+ init_simple_test();
+ ts.tst = plant_and_detach_test;
+ ts.name = "plant_and_detach_test";
+ /* Activate test with initial breakpoint */
+ if (!is_early)
+ kgdb_breakpoint();
+ probe_kernel_read(after, (char *)kgdbts_break_test,
+ BREAK_INSTR_SIZE);
+ if (memcmp(before, after, BREAK_INSTR_SIZE)) {
+ printk(KERN_CRIT "kgdbts: ERROR kgdb corrupted memory\n");
+ panic("kgdb memory corruption");
+ }
+
+ /* complete the detach test */
+ if (!is_early)
+ kgdbts_break_test();
+}
+
+static void run_breakpoint_test(int is_hw_breakpoint)
+{
+ test_complete = 0;
+ init_simple_test();
+ if (is_hw_breakpoint) {
+ ts.tst = hw_breakpoint_test;
+ ts.name = "hw_breakpoint_test";
+ } else {
+ ts.tst = sw_breakpoint_test;
+ ts.name = "sw_breakpoint_test";
+ }
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+ /* run code with the break point in it */
+ kgdbts_break_test();
+ kgdb_breakpoint();
+
+ if (test_complete)
+ return;
+
+ printk(KERN_ERR "kgdbts: ERROR %s test failed\n", ts.name);
+}
+
+static void run_hw_break_test(int is_write_test)
+{
+ test_complete = 0;
+ init_simple_test();
+ if (is_write_test) {
+ ts.tst = hw_write_break_test;
+ ts.name = "hw_write_break_test";
+ } else {
+ ts.tst = hw_access_break_test;
+ ts.name = "hw_access_break_test";
+ }
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+ hw_break_val_access();
+ if (is_write_test) {
+ if (test_complete == 2)
+ printk(KERN_ERR "kgdbts: ERROR %s broke on access\n",
+ ts.name);
+ hw_break_val_write();
+ }
+ kgdb_breakpoint();
+
+ if (test_complete == 1)
+ return;
+
+ printk(KERN_ERR "kgdbts: ERROR %s test failed\n", ts.name);
+}
+
+static void run_nmi_sleep_test(int nmi_sleep)
+{
+ unsigned long flags;
+
+ init_simple_test();
+ ts.tst = nmi_sleep_test;
+ ts.name = "nmi_sleep_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+ local_irq_save(flags);
+ mdelay(nmi_sleep*1000);
+ touch_nmi_watchdog();
+ local_irq_restore(flags);
+ if (test_complete != 2)
+ printk(KERN_ERR "kgdbts: ERROR nmi_test did not hit nmi\n");
+ kgdb_breakpoint();
+ if (test_complete == 1)
+ return;
+
+ printk(KERN_ERR "kgdbts: ERROR %s test failed\n", ts.name);
+}
+
+static void run_bad_read_test(void)
+{
+ init_simple_test();
+ ts.tst = bad_read_test;
+ ts.name = "bad_read_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+}
+
+static void run_do_fork_test(void)
+{
+ init_simple_test();
+ ts.tst = do_fork_test;
+ ts.name = "do_fork_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+}
+
+static void run_sys_open_test(void)
+{
+ init_simple_test();
+ ts.tst = sys_open_test;
+ ts.name = "sys_open_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+}
+
+static void run_singlestep_break_test(void)
+{
+ init_simple_test();
+ ts.tst = singlestep_break_test;
+ ts.name = "singlestep_breakpoint_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+ kgdbts_break_test();
+ kgdbts_break_test();
+}
+
+static void kgdbts_run_tests(void)
+{
+ char *ptr;
+ int fork_test = 0;
+ int sys_open_test = 0;
+ int nmi_sleep = 0;
+
+ ptr = strstr(config, "F");
+ if (ptr)
+ fork_test = simple_strtol(ptr+1, NULL, 10);
+ ptr = strstr(config, "S");
+ if (ptr)
+ sys_open_test = simple_strtol(ptr+1, NULL, 10);
+ ptr = strstr(config, "N");
+ if (ptr)
+ nmi_sleep = simple_strtol(ptr+1, NULL, 10);
+
+ /* required internal KGDB tests */
+ v1printk("kgdbts:RUN plant and detach test\n");
+ run_plant_and_detach_test(0);
+ v1printk("kgdbts:RUN sw breakpoint test\n");
+ run_breakpoint_test(0);
+ v1printk("kgdbts:RUN bad memory access test\n");
+ run_bad_read_test();
+ v1printk("kgdbts:RUN singlestep breakpoint test\n");
+ run_singlestep_break_test();
+
+ /* ===Optional tests=== */
+
+ /* All HW break point tests */
+ if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+ v1printk("kgdbts:RUN hw breakpoint test\n");
+ run_breakpoint_test(1);
+ v1printk("kgdbts:RUN hw write breakpoint test\n");
+ run_hw_break_test(1);
+ v1printk("kgdbts:RUN access write breakpoint test\n");
+ run_hw_break_test(0);
+ }
+
+ if (nmi_sleep) {
+ v1printk("kgdbts:RUN NMI sleep %i seconds test\n", nmi_sleep);
+ run_nmi_sleep_test(nmi_sleep);
+ }
+
+ /* If the do_fork test is run it will be the last test that is
+ * executed because a kernel thread will be spawned at the very
+ * end to unregister the debug hooks.
+ */
+ if (fork_test) {
+ repeat_test = fork_test;
+ printk(KERN_INFO "kgdbts:RUN do_fork for %i breakpoints\n",
+ repeat_test);
+ kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg");
+ run_do_fork_test();
+ return;
+ }
+
+ /* If the sys_open test is run it will be the last test that is
+ * executed because a kernel thread will be spawned at the very
+ * end to unregister the debug hooks.
+ */
+ if (sys_open_test) {
+ repeat_test = sys_open_test;
+ printk(KERN_INFO "kgdbts:RUN sys_open for %i breakpoints\n",
+ repeat_test);
+ kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg");
+ run_sys_open_test();
+ return;
+ }
+ /* Shutdown and unregister */
+ kgdb_unregister_io_module(&kgdbts_io_ops);
+ configured = 0;
+}
+
+static int kgdbts_option_setup(char *opt)
+{
+ if (strlen(opt) > MAX_CONFIG_LEN) {
+ printk(KERN_ERR "kgdbts: config string too long\n");
+ return -ENOSPC;
+ }
+ strcpy(config, opt);
+
+ verbose = 0;
+ if (strstr(config, "V1"))
+ verbose = 1;
+ if (strstr(config, "V2"))
+ verbose = 2;
+
+ return 0;
+}
+
+__setup("kgdbts=", kgdbts_option_setup);
+
+static int configure_kgdbts(void)
+{
+ int err = 0;
+
+ if (!strlen(config) || isspace(config[0]))
+ goto noconfig;
+ err = kgdbts_option_setup(config);
+ if (err)
+ goto noconfig;
+
+ final_ack = 0;
+ run_plant_and_detach_test(1);
+
+ err = kgdb_register_io_module(&kgdbts_io_ops);
+ if (err) {
+ configured = 0;
+ return err;
+ }
+ configured = 1;
+ kgdbts_run_tests();
+
+ return err;
+
+noconfig:
+ config[0] = 0;
+ configured = 0;
+
+ return err;
+}
+
+static int __init init_kgdbts(void)
+{
+ /* Already configured? */
+ if (configured == 1)
+ return 0;
+
+ return configure_kgdbts();
+}
+
+static void cleanup_kgdbts(void)
+{
+ if (configured == 1)
+ kgdb_unregister_io_module(&kgdbts_io_ops);
+}
+
+static int kgdbts_get_char(void)
+{
+ int val = 0;
+
+ if (ts.run_test)
+ val = ts.run_test(1, 0);
+
+ return val;
+}
+
+static void kgdbts_put_char(u8 chr)
+{
+ if (ts.run_test)
+ ts.run_test(0, chr);
+}
+
+static int param_set_kgdbts_var(const char *kmessage, struct kernel_param *kp)
+{
+ int len = strlen(kmessage);
+
+ if (len >= MAX_CONFIG_LEN) {
+ printk(KERN_ERR "kgdbts: config string too long\n");
+ return -ENOSPC;
+ }
+
+ /* Only copy in the string if the init function has not run yet */
+ if (configured < 0) {
+ strcpy(config, kmessage);
+ return 0;
+ }
+
+ if (kgdb_connected) {
+ printk(KERN_ERR
+ "kgdbts: Cannot reconfigure while KGDB is connected.\n");
+
+ return -EBUSY;
+ }
+
+ strcpy(config, kmessage);
+ /* Chop out \n char as a result of echo */
+ if (config[len - 1] == '\n')
+ config[len - 1] = '\0';
+
+ if (configured == 1)
+ cleanup_kgdbts();
+
+ /* Go and configure with the new params. */
+ return configure_kgdbts();
+}
+
+static void kgdbts_pre_exp_handler(void)
+{
+ /* Increment the module count when the debugger is active */
+ if (!kgdb_connected)
+ try_module_get(THIS_MODULE);
+}
+
+static void kgdbts_post_exp_handler(void)
+{
+ /* decrement the module count when the debugger detaches */
+ if (!kgdb_connected)
+ module_put(THIS_MODULE);
+}
+
+static struct kgdb_io kgdbts_io_ops = {
+ .name = "kgdbts",
+ .read_char = kgdbts_get_char,
+ .write_char = kgdbts_put_char,
+ .pre_exception = kgdbts_pre_exp_handler,
+ .post_exception = kgdbts_post_exp_handler,
+};
+
+module_init(init_kgdbts);
+module_exit(cleanup_kgdbts);
+module_param_call(kgdbts, param_set_kgdbts_var, param_get_string, &kps, 0644);
+MODULE_PARM_DESC(kgdbts, "<A|V1|V2>[F#|S#][N#]");
+MODULE_DESCRIPTION("KGDB Test Suite");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wind River Systems, Inc.");
+
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff