iwlwifi: fix some documentation typos

Fix some typos.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
index 98c7aa7346da1ebb78e6ab98dd4c6fffb25d296b..976448a57d02649a7263b499bcc4974a5a1db18c 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h
+++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
@@ -93,7 +93,7 @@ struct iwl_cfg;
  *     1) The driver layer (iwl-drv.c) chooses the op_mode based on the
  *        capabilities advertized by the fw file (in TLV format).
  *     2) The driver layer starts the op_mode (ops->start)
- *     3) The op_mode registers registers mac80211
+ *     3) The op_mode registers mac80211
  *     4) The op_mode is governed by mac80211
  *     5) The driver layer stops the op_mode
  */
@@ -112,7 +112,7 @@ struct iwl_cfg;
  * @stop: stop the op_mode. Must free all the memory allocated.
  *     May sleep
  * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the
- *     HCMD the this Rx responds to.
+ *     HCMD this Rx responds to.
  *     This callback may sleep, it is called from a threaded IRQ handler.
  * @queue_full: notifies that a HW queue is full.
  *     Must be atomic and called with BH disabled.

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 8d91422c598265c6b69b32874cf3d77fc7c9554c..523dc7ce294b7045fba25aab54fb807dc867895a 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -180,7 +180,7 @@ struct iwl_rx_packet {
  * enum CMD_MODE - how to send the host commands ?
  *
  * @CMD_SYNC: The caller will be stalled until the fw responds to the command
- * @CMD_ASYNC: Return right away and don't want for the response
+ * @CMD_ASYNC: Return right away and don't wait for the response
  * @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the
  *     response. The caller needs to call iwl_free_resp when done.
  */
@@ -218,7 +218,7 @@ struct iwl_device_cmd {
  *
  * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
  *     ring. The transport layer doesn't map the command's buffer to DMA, but
- *     rather copies it to an previously allocated DMA buffer. This flag tells
+ *     rather copies it to a previously allocated DMA buffer. This flag tells
  *     the transport layer not to copy the command, but to map the existing
  *     buffer (that is passed in) instead. This saves the memcpy and allows
  *     commands that are bigger than the fixed buffer to be submitted.
@@ -243,7 +243,7 @@ enum iwl_hcmd_dataflag {
  * @handler_status: return value of the handler of the command
  *     (put in setup_rx_handlers) - valid for SYNC mode only
  * @flags: can be CMD_*
- * @len: array of the lenths of the chunks in data
+ * @len: array of the lengths of the chunks in data
  * @dataflags: IWL_HCMD_DFL_*
  * @id: id of the host command
  */

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 76cdba65b3211e79564fb9efb17abc040ba86181..deebe8f9c00d49317669bd106302dfb272f32cd7 100644 (file)
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -503,7 +503,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 
        mutex_lock(&mvm->mutex);
 
-       /* Allocate resources for the MAC context, and add it the the fw  */
+       /* Allocate resources for the MAC context, and add it to the fw  */
        ret = iwl_mvm_mac_ctxt_init(mvm, vif);
        if (ret)
                goto out_unlock;

diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 7694b8fa4c377565aee193c37f09396fb0a43c78..f68ef9dd6a700abaaec588da2f6118d6b7091ea9 100644 (file)
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -173,7 +173,7 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm,
        }
 
        /*
-        * for data packets, rate info comes from the table inside he fw. This
+        * for data packets, rate info comes from the table inside the fw. This
         * table is controlled by LINK_QUALITY commands
         */
 

diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 134f7a109f47697e044e950e6b587b231e428cf9..f29cd5c0aeed5948dd0cff1d1b329b5e56c2f9b2 100644 (file)
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -1153,10 +1153,10 @@ void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id)
 /*
  * iwl_pcie_enqueue_hcmd - enqueue a uCode command
  * @priv: device private data point
- * @cmd: a point to the ucode command structure
+ * @cmd: a pointer to the ucode command structure
  *
- * The function returns < 0 values to indicate the operation is
- * failed. On success, it turns the index (> 0) of command in the
+ * The function returns < 0 values to indicate the operation
+ * failed. On success, it returns the index (>= 0) of command in the
  * command queue.
  */
 static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans,