clk: st: Adds clockgen-vcc and clockgen-mux clock binding

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
new file mode 100644 (file)
index 0000000..943e080
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -0,0 +1,36 @@
+Binding for a ST multiplexed clock driver.
+
+This binding supports only simple indexed multiplexers, it does not
+support table based parent index to hardware value translations.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+       "st,stih416-clkgenc-vcc-hd",    "st,clkgen-mux"
+       "st,stih416-clkgenf-vcc-fvdp",  "st,clkgen-mux"
+       "st,stih416-clkgenf-vcc-hva",   "st,clkgen-mux"
+       "st,stih416-clkgenf-vcc-hd",    "st,clkgen-mux"
+       "st,stih416-clkgenf-vcc-sd",    "st,clkgen-mux"
+       "st,stih415-clkgen-a9-mux",     "st,clkgen-mux"
+       "st,stih416-clkgen-a9-mux",     "st,clkgen-mux"
+
+
+- #clock-cells : from common clock binding; shall be set to 0.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+Example:
+
+       CLK_M_HVA: CLK_M_HVA {
+               #clock-cells = <0>;
+               compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
+               reg = <0xfd690868 4>;
+
+               clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>;
+       };

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
new file mode 100644 (file)
index 0000000..4e3ff28
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
@@ -0,0 +1,53 @@
+Binding for a type of STMicroelectronics clock crossbar (VCC).
+
+The crossbar can take up to 4 input clocks and control up to 16
+output clocks. Not all inputs or outputs have to be in use in a
+particular instantiation. Each output can be individually enabled,
+select any of the input clocks and apply a divide (by 1,2,4 or 8) to
+that selected clock.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+       "st,stih416-clkgenc",           "st,vcc"
+       "st,stih416-clkgenf",           "st,vcc"
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 16
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       16 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+       CLOCKGEN_C_VCC: CLOCKGEN_C_VCC {
+               #clock-cells = <1>;
+               compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
+               reg = <0xfe8308ac 12>;
+
+               clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>,
+                       <&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>;
+
+               clock-output-names  =
+                       "CLK_S_PIX_HDMI",  "CLK_S_PIX_DVO",
+                       "CLK_S_OUT_DVO",   "CLK_S_PIX_HD",
+                       "CLK_S_HDDAC",     "CLK_S_DENC",
+                       "CLK_S_SDDAC",     "CLK_S_PIX_MAIN",
+                       "CLK_S_PIX_AUX",   "CLK_S_STFE_FRC_0",
+                       "CLK_S_REF_MCRU",  "CLK_S_SLAVE_MCRU",
+                       "CLK_S_TMDS_HDMI", "CLK_S_HDMI_REJECT_PLL",
+                       "CLK_S_THSENS";
+       };
+