obj-$(CONFIG_ZD1211RW) += zd1211rw.o
-zd1211rw-objs := zd_chip.o zd_ieee80211.o zd_mac.o \
+zd1211rw-objs := zd_chip.o zd_mac.o \
zd_rf_al2230.o zd_rf_rf2959.o \
zd_rf_al7230b.o zd_rf_uw2453.o \
zd_rf.o zd_usb.o
#include "zd_def.h"
#include "zd_chip.h"
-#include "zd_ieee80211.h"
#include "zd_mac.h"
#include "zd_rf.h"
+++ /dev/null
-/* ZD1211 USB-WLAN driver for Linux
- *
- * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
- * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * In the long term, we'll probably find a better way of handling regulatory
- * requirements outside of the driver.
- */
-
-#include <linux/kernel.h>
-#include <net/mac80211.h>
-
-#include "zd_ieee80211.h"
-#include "zd_mac.h"
-
-struct channel_range {
- u8 regdomain;
- u8 start;
- u8 end; /* exclusive (channel must be less than end) */
-};
-
-static const struct channel_range channel_ranges[] = {
- { ZD_REGDOMAIN_FCC, 1, 12 },
- { ZD_REGDOMAIN_IC, 1, 12 },
- { ZD_REGDOMAIN_ETSI, 1, 14 },
- { ZD_REGDOMAIN_JAPAN, 1, 14 },
- { ZD_REGDOMAIN_SPAIN, 1, 14 },
- { ZD_REGDOMAIN_FRANCE, 1, 14 },
-
- /* Japan originally only had channel 14 available (see CHNL_ID 0x40 in
- * 802.11). However, in 2001 the range was extended to include channels
- * 1-13. The ZyDAS devices still use the old region code but are
- * designed to allow the extra channel access in Japan. */
- { ZD_REGDOMAIN_JAPAN_ADD, 1, 15 },
-};
-
-static const struct channel_range *zd_channel_range(u8 regdomain)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(channel_ranges); i++) {
- const struct channel_range *range = &channel_ranges[i];
- if (range->regdomain == regdomain)
- return range;
- }
- return NULL;
-}
-
-#define CHAN_TO_IDX(chan) ((chan) - 1)
-
-static void unmask_bg_channels(struct ieee80211_hw *hw,
- const struct channel_range *range,
- struct ieee80211_supported_band *sband)
-{
- u8 channel;
-
- for (channel = range->start; channel < range->end; channel++) {
- struct ieee80211_channel *chan =
- &sband->channels[CHAN_TO_IDX(channel)];
- chan->flags = 0;
- }
-}
-
-void zd_geo_init(struct ieee80211_hw *hw, u8 regdomain)
-{
- struct zd_mac *mac = zd_hw_mac(hw);
- const struct channel_range *range;
-
- dev_dbg(zd_mac_dev(mac), "regdomain %#02x\n", regdomain);
-
- range = zd_channel_range(regdomain);
- if (!range) {
- /* The vendor driver overrides the regulatory domain and
- * allowed channel registers and unconditionally restricts
- * available channels to 1-11 everywhere. Match their
- * questionable behaviour only for regdomains which we don't
- * recognise. */
- dev_warn(zd_mac_dev(mac), "Unrecognised regulatory domain: "
- "%#02x. Defaulting to FCC.\n", regdomain);
- range = zd_channel_range(ZD_REGDOMAIN_FCC);
- }
-
- unmask_bg_channels(hw, range, &mac->band);
-}
-
+++ /dev/null
-/* ZD1211 USB-WLAN driver for Linux
- *
- * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
- * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ZD_IEEE80211_H
-#define _ZD_IEEE80211_H
-
-#include <net/mac80211.h>
-
-/* Additional definitions from the standards.
- */
-
-#define ZD_REGDOMAIN_FCC 0x10
-#define ZD_REGDOMAIN_IC 0x20
-#define ZD_REGDOMAIN_ETSI 0x30
-#define ZD_REGDOMAIN_SPAIN 0x31
-#define ZD_REGDOMAIN_FRANCE 0x32
-#define ZD_REGDOMAIN_JAPAN_ADD 0x40
-#define ZD_REGDOMAIN_JAPAN 0x41
-
-enum {
- MIN_CHANNEL24 = 1,
- MAX_CHANNEL24 = 14,
-};
-
-void zd_geo_init(struct ieee80211_hw *hw, u8 regdomain);
-
-#define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80
-
-struct ofdm_plcp_header {
- u8 prefix[3];
- __le16 service;
-} __attribute__((packed));
-
-static inline u8 zd_ofdm_plcp_header_rate(const struct ofdm_plcp_header *header)
-{
- return header->prefix[0] & 0xf;
-}
-
-/* The following defines give the encoding of the 4-bit rate field in the
- * OFDM (802.11a/802.11g) PLCP header. Notify that these values are used to
- * define the zd-rate values for OFDM.
- *
- * See the struct zd_ctrlset definition in zd_mac.h.
- */
-#define ZD_OFDM_PLCP_RATE_6M 0xb
-#define ZD_OFDM_PLCP_RATE_9M 0xf
-#define ZD_OFDM_PLCP_RATE_12M 0xa
-#define ZD_OFDM_PLCP_RATE_18M 0xe
-#define ZD_OFDM_PLCP_RATE_24M 0x9
-#define ZD_OFDM_PLCP_RATE_36M 0xd
-#define ZD_OFDM_PLCP_RATE_48M 0x8
-#define ZD_OFDM_PLCP_RATE_54M 0xc
-
-struct cck_plcp_header {
- u8 signal;
- u8 service;
- __le16 length;
- __le16 crc16;
-} __attribute__((packed));
-
-static inline u8 zd_cck_plcp_header_signal(const struct cck_plcp_header *header)
-{
- return header->signal;
-}
-
-/* These defines give the encodings of the signal field in the 802.11b PLCP
- * header. The signal field gives the bit rate of the following packet. Even
- * if technically wrong we use CCK here also for the 1 MBit/s and 2 MBit/s
- * rate to stay consistent with Zydas and our use of the term.
- *
- * Notify that these values are *not* used in the zd-rates.
- */
-#define ZD_CCK_PLCP_SIGNAL_1M 0x0a
-#define ZD_CCK_PLCP_SIGNAL_2M 0x14
-#define ZD_CCK_PLCP_SIGNAL_5M5 0x37
-#define ZD_CCK_PLCP_SIGNAL_11M 0x6e
-
-#endif /* _ZD_IEEE80211_H */
* Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
* Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
* Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (C) 2007-2008 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "zd_def.h"
#include "zd_chip.h"
#include "zd_mac.h"
-#include "zd_ieee80211.h"
#include "zd_rf.h"
+struct zd_reg_alpha2_map {
+ u32 reg;
+ char alpha2[2];
+};
+
+static struct zd_reg_alpha2_map reg_alpha2_map[] = {
+ { ZD_REGDOMAIN_FCC, "US" },
+ { ZD_REGDOMAIN_IC, "CA" },
+ { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */
+ { ZD_REGDOMAIN_JAPAN, "JP" },
+ { ZD_REGDOMAIN_JAPAN_ADD, "JP" },
+ { ZD_REGDOMAIN_SPAIN, "ES" },
+ { ZD_REGDOMAIN_FRANCE, "FR" },
+};
+
/* This table contains the hardware specific values for the modulation rates. */
static const struct ieee80211_rate zd_rates[] = {
{ .bitrate = 10,
static void housekeeping_enable(struct zd_mac *mac);
static void housekeeping_disable(struct zd_mac *mac);
+static int zd_reg2alpha2(u8 regdomain, char *alpha2)
+{
+ unsigned int i;
+ struct zd_reg_alpha2_map *reg_map;
+ for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) {
+ reg_map = ®_alpha2_map[i];
+ if (regdomain == reg_map->reg) {
+ alpha2[0] = reg_map->alpha2[0];
+ alpha2[1] = reg_map->alpha2[1];
+ return 0;
+ }
+ }
+ return 1;
+}
+
int zd_mac_preinit_hw(struct ieee80211_hw *hw)
{
int r;
int r;
struct zd_mac *mac = zd_hw_mac(hw);
struct zd_chip *chip = &mac->chip;
+ char alpha2[2];
u8 default_regdomain;
r = zd_chip_enable_int(chip);
if (r)
goto disable_int;
- zd_geo_init(hw, mac->regdomain);
+ r = zd_reg2alpha2(mac->regdomain, alpha2);
+ if (!r)
+ regulatory_hint(hw->wiphy, alpha2, NULL);
r = 0;
disable_int:
return 0;
}
-void zd_process_intr(struct work_struct *work)
+static void zd_process_intr(struct work_struct *work)
{
u16 int_status;
struct zd_mac *mac = container_of(work, struct zd_mac, process_intr);
#include <net/mac80211.h>
#include "zd_chip.h"
-#include "zd_ieee80211.h"
struct zd_ctrlset {
u8 modulation;
unsigned int pass_ctrl:1;
};
+#define ZD_REGDOMAIN_FCC 0x10
+#define ZD_REGDOMAIN_IC 0x20
+#define ZD_REGDOMAIN_ETSI 0x30
+#define ZD_REGDOMAIN_SPAIN 0x31
+#define ZD_REGDOMAIN_FRANCE 0x32
+#define ZD_REGDOMAIN_JAPAN_ADD 0x40
+#define ZD_REGDOMAIN_JAPAN 0x41
+
+enum {
+ MIN_CHANNEL24 = 1,
+ MAX_CHANNEL24 = 14,
+};
+
+#define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80
+
+struct ofdm_plcp_header {
+ u8 prefix[3];
+ __le16 service;
+} __attribute__((packed));
+
+static inline u8 zd_ofdm_plcp_header_rate(const struct ofdm_plcp_header *header)
+{
+ return header->prefix[0] & 0xf;
+}
+
+/* The following defines give the encoding of the 4-bit rate field in the
+ * OFDM (802.11a/802.11g) PLCP header. Notify that these values are used to
+ * define the zd-rate values for OFDM.
+ *
+ * See the struct zd_ctrlset definition in zd_mac.h.
+ */
+#define ZD_OFDM_PLCP_RATE_6M 0xb
+#define ZD_OFDM_PLCP_RATE_9M 0xf
+#define ZD_OFDM_PLCP_RATE_12M 0xa
+#define ZD_OFDM_PLCP_RATE_18M 0xe
+#define ZD_OFDM_PLCP_RATE_24M 0x9
+#define ZD_OFDM_PLCP_RATE_36M 0xd
+#define ZD_OFDM_PLCP_RATE_48M 0x8
+#define ZD_OFDM_PLCP_RATE_54M 0xc
+
+struct cck_plcp_header {
+ u8 signal;
+ u8 service;
+ __le16 length;
+ __le16 crc16;
+} __attribute__((packed));
+
+static inline u8 zd_cck_plcp_header_signal(const struct cck_plcp_header *header)
+{
+ return header->signal;
+}
+
+/* These defines give the encodings of the signal field in the 802.11b PLCP
+ * header. The signal field gives the bit rate of the following packet. Even
+ * if technically wrong we use CCK here also for the 1 MBit/s and 2 MBit/s
+ * rate to stay consistent with Zydas and our use of the term.
+ *
+ * Notify that these values are *not* used in the zd-rates.
+ */
+#define ZD_CCK_PLCP_SIGNAL_1M 0x0a
+#define ZD_CCK_PLCP_SIGNAL_2M 0x14
+#define ZD_CCK_PLCP_SIGNAL_5M5 0x37
+#define ZD_CCK_PLCP_SIGNAL_11M 0x6e
+
static inline struct zd_mac *zd_hw_mac(struct ieee80211_hw *hw)
{
return hw->priv;
#include "zd_def.h"
#include "zd_rf.h"
-#include "zd_ieee80211.h"
+#include "zd_mac.h"
#include "zd_chip.h"
static const char * const rfs[] = {
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff