- model : this is your board name/model
- #address-cells : address representation for "root" devices
- #size-cells: the size representation for "root" devices
+ - device_type : This property shouldn't be necessary. However, if
+ you decide to create a device_type for your root node, make sure it
+ is _not_ "chrp" unless your platform is a pSeries or PAPR compliant
+ one for 64-bit, or a CHRP-type machine for 32-bit as this will
+ matched by the kernel this way.
Additionally, some recommended properties are:
DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size));
DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size));
DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page));
- DEFINE(PLATFORM_LPAR, PLATFORM_LPAR);
-
/* paca */
DEFINE(PACA_SIZE, sizeof(struct paca_struct));
DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index));
case IOC_NVRAM_GET_OFFSET: {
int part, offset;
- if (_machine != PLATFORM_POWERMAC)
+ if (!machine_is(powermac))
return -EINVAL;
if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0)
return -EFAULT;
* in our nvram, as Apple defined partitions use pretty much
* all of the space
*/
- if (_machine == PLATFORM_POWERMAC)
+ if (machine_is(powermac))
return -ENOSPC;
/* see if we have an OS partition that meets our needs.
* fix has to be done by making the remapping per-host and always
* filling the pci_to_OF map. --BenH
*/
- if (_machine == _MACH_Pmac && busnr >= 0xf0)
+ if (machine_is(powermac) && busnr >= 0xf0)
busnr -= 0xf0;
else
#endif
* (bus 0 is HT root), we return the AGP one instead.
*/
#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4"))
+ if (machine_is(powermac) && machine_is_compatible("MacRISC4"))
if (bus == 0)
bus = 0xf0;
#endif /* CONFIG_PPC_PMAC */
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <asm/machdep.h>
#include <asm/vdso_datapage.h>
#include <asm/rtas.h>
#include <asm/uaccess.h>
if (!root)
return 1;
- if (!(platform_is_pseries() || _machine == PLATFORM_CELL))
+ if (!machine_is(pseries) && !machine_is(cell))
return 0;
if (!proc_mkdir("rtas", root))
/* Apple uses bits in there in a different way, let's
* only keep the real sense bit on macs
*/
- if (_machine == PLATFORM_POWERMAC)
+ if (machine_is(powermac))
sense &= 0x1;
np->intrs[intrcount].sense = map_mpic_senses[sense];
}
#ifdef CONFIG_PPC64
/* We offset irq numbers for the u3 MPIC by 128 in PowerMac */
- if (_machine == PLATFORM_POWERMAC && ic && ic->parent) {
+ if (machine_is(powermac) && ic && ic->parent) {
char *name = get_property(ic->parent, "name", NULL);
if (name && !strcmp(name, "u3"))
np->intrs[intrcount].line += 128;
return rc;
}
+unsigned long __init of_get_flat_dt_root(void)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+
+ while(*((u32 *)p) == OF_DT_NOP)
+ p += 4;
+ BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE);
+ p += 4;
+ return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
/**
* This function can be used within scan_flattened_dt callback to get
* access to properties
} while(1);
}
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+ const char* cp;
+ unsigned long cplen, l;
+
+ cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+ if (cp == NULL)
+ return 0;
+ while (cplen > 0) {
+ if (strncasecmp(cp, compat, strlen(compat)) == 0)
+ return 1;
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return 0;
+}
+
static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
unsigned long align)
{
#ifdef DEBUG
if ((strlen(p) + l + 1) != allocl) {
DBG("%s: p: %d, l: %d, a: %d\n",
- pathp, strlen(p), l, allocl);
+ pathp, (int)strlen(p), l, allocl);
}
#endif
p += strlen(p);
static int __init early_init_dt_scan_chosen(unsigned long node,
const char *uname, int depth, void *data)
{
- u32 *prop;
unsigned long *lprop;
unsigned long l;
char *p;
(strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
return 0;
- /* get platform type */
- prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL);
- if (prop == NULL)
- return 0;
-#ifdef CONFIG_PPC_MULTIPLATFORM
- _machine = *prop;
-#endif
-
#ifdef CONFIG_PPC64
/* check if iommu is forced on or off */
if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
* set of RTAS infos now if available
*/
{
- u64 *basep, *entryp;
+ u64 *basep, *entryp, *sizep;
basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL);
entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL);
- prop = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
- if (basep && entryp && prop) {
+ sizep = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
+ if (basep && entryp && sizep) {
rtas.base = *basep;
rtas.entry = *entryp;
- rtas.size = *prop;
+ rtas.size = *sizep;
}
}
#endif /* CONFIG_PPC_RTAS */
/* We don't support that function on PowerMac, at least
* not yet
*/
- if (_machine == PLATFORM_POWERMAC)
+ if (machine_is(powermac))
return -ENODEV;
/* fix up new node's linux_phandle field */
static unsigned long __initdata prom_tce_alloc_end;
#endif
+/* Platforms codes are now obsolete in the kernel. Now only used within this
+ * file and ultimately gone too. Feel free to change them if you need, they
+ * are not shared with anything outside of this file anymore
+ */
+#define PLATFORM_PSERIES 0x0100
+#define PLATFORM_PSERIES_LPAR 0x0101
+#define PLATFORM_LPAR 0x0001
+#define PLATFORM_POWERMAC 0x0400
+#define PLATFORM_GENERIC 0x0500
+
static int __initdata of_platform;
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
int len, i = 0;
#ifdef CONFIG_PPC64
phandle rtas;
+ int x;
#endif
+
+ /* Look for a PowerMac */
len = prom_getprop(_prom->root, "compatible",
compat, sizeof(compat)-1);
if (len > 0) {
if (strstr(p, RELOC("Power Macintosh")) ||
strstr(p, RELOC("MacRISC")))
return PLATFORM_POWERMAC;
-#ifdef CONFIG_PPC64
- if (strstr(p, RELOC("Momentum,Maple")))
- return PLATFORM_MAPLE;
- if (strstr(p, RELOC("IBM,CPB")))
- return PLATFORM_CELL;
-#endif
i += sl + 1;
}
}
#ifdef CONFIG_PPC64
+ /* If not a mac, try to figure out if it's an IBM pSeries or any other
+ * PAPR compliant platform. We assume it is if :
+ * - /device_type is "chrp" (please, do NOT use that for future
+ * non-IBM designs !
+ * - it has /rtas
+ */
+ len = prom_getprop(_prom->root, "model",
+ compat, sizeof(compat)-1);
+ if (len <= 0)
+ return PLATFORM_GENERIC;
+ compat[len] = 0;
+ if (strcmp(compat, "chrp"))
+ return PLATFORM_GENERIC;
+
/* Default to pSeries. We need to know if we are running LPAR */
rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
- if (PHANDLE_VALID(rtas)) {
- int x = prom_getproplen(rtas, "ibm,hypertas-functions");
- if (x != PROM_ERROR) {
- prom_printf("Hypertas detected, assuming LPAR !\n");
- return PLATFORM_PSERIES_LPAR;
- }
+ if (!PHANDLE_VALID(rtas))
+ return PLATFORM_GENERIC;
+ x = prom_getproplen(rtas, "ibm,hypertas-functions");
+ if (x != PROM_ERROR) {
+ prom_printf("Hypertas detected, assuming LPAR !\n");
+ return PLATFORM_PSERIES_LPAR;
}
return PLATFORM_PSERIES;
#else
- return PLATFORM_CHRP;
+ return PLATFORM_GENERIC;
#endif
}
{
struct prom_t *_prom;
unsigned long hdr;
- u32 getprop_rval;
unsigned long offset = reloc_offset();
#ifdef CONFIG_PPC32
* between pSeries SMP and pSeries LPAR
*/
RELOC(of_platform) = prom_find_machine_type();
- getprop_rval = RELOC(of_platform);
- prom_setprop(_prom->chosen, "/chosen", "linux,platform",
- &getprop_rval, sizeof(getprop_rval));
/* Bail if this is a kdump kernel. */
if (PHYSICAL_START > 0)
{
struct proc_dir_entry *entry;
- if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR)
+ if (!machine_is(pseries))
return 1;
rtas_node = of_find_node_by_name(NULL, "rtas");
#include <asm/hvcall.h>
#include <asm/semaphore.h>
#include <asm/machdep.h>
+#include <asm/firmware.h>
#include <asm/page.h>
#include <asm/param.h>
#include <asm/system.h>
* the stop-self token if any
*/
#ifdef CONFIG_PPC64
- if (_machine == PLATFORM_PSERIES_LPAR) {
+ if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
ibm_suspend_me_token = rtas_token("ibm,suspend-me");
}
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+
+#undef DEBUG
+
#include <linux/config.h>
#include <linux/module.h>
#include <linux/string.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
+#include <asm/firmware.h>
#include <asm/btext.h>
#include <asm/nvram.h>
#include <asm/setup.h>
#include "setup.h"
-#undef DEBUG
-
#ifdef DEBUG
#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
#define DBG(fmt...)
#endif
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-EXPORT_SYMBOL(_machine);
-#endif
+/* The main machine-dep calls structure
+ */
+struct machdep_calls ppc_md;
+EXPORT_SYMBOL(ppc_md);
+struct machdep_calls *machine_id;
+EXPORT_SYMBOL(machine_id);
unsigned long klimit = (unsigned long) _end;
bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
#endif /* CONFIG_SMP && CONFIG_PPC32 */
seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
-
+ if (ppc_md.name)
+ seq_printf(m, "platform\t: %s\n", ppc_md.name);
if (ppc_md.show_cpuinfo != NULL)
ppc_md.show_cpuinfo(m);
* On pSeries LPAR, we need to know how many cpus
* could possibly be added to this partition.
*/
- if (_machine == PLATFORM_PSERIES_LPAR &&
+ if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR) &&
(dn = of_find_node_by_path("/rtas"))) {
int num_addr_cell, num_size_cell, maxcpus;
unsigned int *ireg;
}
early_param("xmon", early_xmon);
#endif
+
+void probe_machine(void)
+{
+ extern struct machdep_calls __machine_desc_start;
+ extern struct machdep_calls __machine_desc_end;
+
+ /*
+ * Iterate all ppc_md structures until we find the proper
+ * one for the current machine type
+ */
+ DBG("Probing machine type ...\n");
+
+ for (machine_id = &__machine_desc_start;
+ machine_id < &__machine_desc_end;
+ machine_id++) {
+ DBG(" %s ...", machine_id->name);
+ memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls));
+ if (ppc_md.probe()) {
+ DBG(" match !\n");
+ break;
+ }
+ DBG("\n");
+ }
+ /* What can we do if we didn't find ? */
+ if (machine_id >= &__machine_desc_end) {
+ DBG("No suitable machine found !\n");
+ for (;;);
+ }
+
+ printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
+}
int have_of = 1;
#ifdef CONFIG_PPC_MULTIPLATFORM
-extern void prep_init(void);
-extern void pmac_init(void);
-extern void chrp_init(void);
-
dev_t boot_dev;
#endif /* CONFIG_PPC_MULTIPLATFORM */
unsigned long vgacon_remap_base;
#endif
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
/*
* These are used in binfmt_elf.c to put aux entries on the stack
* for each elf executable being started.
return KERNELBASE + offset;
}
-#ifdef CONFIG_PPC_MULTIPLATFORM
-/*
- * The PPC_MULTIPLATFORM version of platform_init...
- */
-void __init platform_init(void)
-{
- /* if we didn't get any bootinfo telling us what we are... */
- if (_machine == 0) {
- /* prep boot loader tells us if we're prep or not */
- if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
- _machine = _MACH_prep;
- }
-
-#ifdef CONFIG_PPC_PREP
- /* not much more to do here, if prep */
- if (_machine == _MACH_prep) {
- prep_init();
- return;
- }
-#endif
-
-#ifdef CONFIG_ADB
- if (strstr(cmd_line, "adb_sync")) {
- extern int __adb_probe_sync;
- __adb_probe_sync = 1;
- }
-#endif /* CONFIG_ADB */
-
- switch (_machine) {
-#ifdef CONFIG_PPC_PMAC
- case _MACH_Pmac:
- pmac_init();
- break;
-#endif
-#ifdef CONFIG_PPC_CHRP
- case _MACH_chrp:
- chrp_init();
- break;
-#endif
- }
-}
-#endif
/*
* Find out what kind of machine we're on and save any data we need
strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
#endif /* CONFIG_CMDLINE */
- /* Base init based on machine type */
+#ifdef CONFIG_PPC_MULTIPLATFORM
+ probe_machine();
+#else
+ /* Base init based on machine type. Obsoloete, please kill ! */
platform_init();
+#endif
#ifdef CONFIG_6xx
if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
-
- /* this is for modules since _machine can be a define -- Cort */
- ppc_md.ppc_machine = _machine;
}
int icache_bsize;
int ucache_bsize;
-/* The main machine-dep calls structure
- */
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
#ifdef CONFIG_MAGIC_SYSRQ
unsigned long SYSRQ_KEY;
#endif /* CONFIG_MAGIC_SYSRQ */
#define check_smt_enabled()
#endif /* CONFIG_SMP */
-extern struct machdep_calls pSeries_md;
-extern struct machdep_calls pmac_md;
-extern struct machdep_calls maple_md;
-extern struct machdep_calls cell_md;
-extern struct machdep_calls iseries_md;
-
-/* Ultimately, stuff them in an elf section like initcalls... */
-static struct machdep_calls __initdata *machines[] = {
-#ifdef CONFIG_PPC_PSERIES
- &pSeries_md,
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_PPC_PMAC
- &pmac_md,
-#endif /* CONFIG_PPC_PMAC */
-#ifdef CONFIG_PPC_MAPLE
- &maple_md,
-#endif /* CONFIG_PPC_MAPLE */
-#ifdef CONFIG_PPC_CELL
- &cell_md,
-#endif
-#ifdef CONFIG_PPC_ISERIES
- &iseries_md,
-#endif
- NULL
-};
-
/*
* Early initialization entry point. This is called by head.S
* with MMU translation disabled. We rely on the "feature" of
void __init early_setup(unsigned long dt_ptr)
{
- static struct machdep_calls **mach;
-
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
- DBG(" -> early_setup()\n");
+ DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
/*
* Do early initializations using the flattened device
get_paca()->stab_real = __pa((u64)&initial_stab);
get_paca()->stab_addr = (u64)&initial_stab;
- /*
- * Iterate all ppc_md structures until we find the proper
- * one for the current machine type
- */
- DBG("Probing machine type for platform %x...\n", _machine);
-
- for (mach = machines; *mach; mach++) {
- if ((*mach)->probe(_machine))
- break;
- }
- /* What can we do if we didn't find ? */
- if (*mach == NULL) {
- DBG("No suitable machine found !\n");
- for (;;);
- }
- ppc_md = **mach;
+ /* Probe the machine type */
+ probe_machine();
#ifdef CONFIG_CRASH_DUMP
kdump_setup();
const char *dc, *ic;
/* Then read cache informations */
- if (_machine == PLATFORM_POWERMAC) {
+ if (machine_is(powermac)) {
dc = "d-cache-block-size";
ic = "i-cache-block-size";
} else {
printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
printk("ppc64_interrupt_controller = 0x%ld\n",
ppc64_interrupt_controller);
- printk("platform = 0x%x\n", _machine);
printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size());
printk("ppc64_caches.dcache_line_size = 0x%x\n",
ppc64_caches.dline_size);
int die(const char *str, struct pt_regs *regs, long err)
{
static int die_counter, crash_dump_start = 0;
- int nl = 0;
if (debugger(regs))
return 1;
spin_lock_irq(&die_lock);
bust_spinlocks(1);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
set_backlight_enable(1);
set_backlight_level(BACKLIGHT_MAX);
}
printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
#ifdef CONFIG_PREEMPT
printk("PREEMPT ");
- nl = 1;
#endif
#ifdef CONFIG_SMP
printk("SMP NR_CPUS=%d ", NR_CPUS);
- nl = 1;
#endif
#ifdef CONFIG_DEBUG_PAGEALLOC
printk("DEBUG_PAGEALLOC ");
- nl = 1;
#endif
#ifdef CONFIG_NUMA
printk("NUMA ");
- nl = 1;
#endif
-#ifdef CONFIG_PPC64
- switch (_machine) {
- case PLATFORM_PSERIES:
- printk("PSERIES ");
- nl = 1;
- break;
- case PLATFORM_PSERIES_LPAR:
- printk("PSERIES LPAR ");
- nl = 1;
- break;
- case PLATFORM_ISERIES_LPAR:
- printk("ISERIES LPAR ");
- nl = 1;
- break;
- case PLATFORM_POWERMAC:
- printk("POWERMAC ");
- nl = 1;
- break;
- case PLATFORM_CELL:
- printk("CELL ");
- nl = 1;
- break;
- }
-#endif
- if (nl)
- printk("\n");
+ printk("%s\n", ppc_md.name ? "" : ppc_md.name);
+
print_modules();
show_regs(regs);
bust_spinlocks(0);
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/sections.h>
+#include <asm/firmware.h>
#include <asm/vdso.h>
#include <asm/vdso_datapage.h>
vdso_data->version.major = SYSTEMCFG_MAJOR;
vdso_data->version.minor = SYSTEMCFG_MINOR;
vdso_data->processor = mfspr(SPRN_PVR);
- vdso_data->platform = _machine;
+ /*
+ * Fake the old platform number for pSeries and iSeries and add
+ * in LPAR bit if necessary
+ */
+ vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ vdso_data->platform |= 1;
vdso_data->physicalMemorySize = lmb_phys_mem_size();
vdso_data->dcache_size = ppc64_caches.dsize;
vdso_data->dcache_line_size = ppc64_caches.dline_size;
#include <linux/config.h>
#ifdef CONFIG_PPC64
#include <asm/page.h>
+#define PROVIDE32(x) PROVIDE(__unused__##x)
#else
#define PAGE_SIZE 4096
#define KERNELBASE CONFIG_KERNEL_START
+#define PROVIDE32(x) PROVIDE(x)
#endif
#include <asm-generic/vmlinux.lds.h>
#endif
SECTIONS
{
- /* Sections to be discarded. */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.exit.data)
- }
-
- . = KERNELBASE;
-
- /* Read-only sections, merged into text segment: */
- .text : {
- *(.text .text.*)
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- *(.fixup)
-#ifdef CONFIG_PPC32
- *(.got1)
- __got2_start = .;
- *(.got2)
- __got2_end = .;
-#else
- . = ALIGN(PAGE_SIZE);
- _etext = .;
-#endif
- }
-#ifdef CONFIG_PPC32
- _etext = .;
- PROVIDE (etext = .);
+ /* Sections to be discarded. */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.exit.data)
+ }
- RODATA
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
+ . = KERNELBASE;
- .fixup : { *(.fixup) }
-#endif
+/*
+ * Text, read only data and other permanent read-only sections
+ */
+
+ /* Text and gots */
+ .text : {
+ *(.text .text.*)
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+#ifdef CONFIG_PPC32
+ *(.got1)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+#endif /* CONFIG_PPC32 */
+
+ . = ALIGN(PAGE_SIZE);
+ _etext = .;
+ PROVIDE32 (etext = .);
+ }
+
+ /* Read-only data */
+ RODATA
+
+ /* Exception & bug tables */
__ex_table : {
__start___ex_table = .;
*(__ex_table)
__stop___bug_table = .;
}
-#ifdef CONFIG_PPC64
+/*
+ * Init sections discarded at runtime
+ */
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+
+ /* .exit.text is discarded at runtime, not link time,
+ * to deal with references from __bug_table
+ */
+ .exit.text : { *(.exit.text) }
+
+ .init.data : {
+ *(.init.data);
+ __vtop_table_begin = .;
+ *(.vtop_fixup);
+ __vtop_table_end = .;
+ __ptov_table_begin = .;
+ *(.ptov_fixup);
+ __ptov_table_end = .;
+ }
+
+ . = ALIGN(16);
+ .init.setup : {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+
+ .initcall.init : {
+ __initcall_start = .;
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ SECURITY_INIT
+
+ . = ALIGN(8);
__ftr_fixup : {
__start___ftr_fixup = .;
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
- RODATA
-#endif
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
#ifdef CONFIG_PPC32
- /* Read-write section, merged into data segment: */
- . = ALIGN(PAGE_SIZE);
- _sdata = .;
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.got.plt) *(.got)
- *(.dynamic)
- CONSTRUCTORS
- }
-
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
- _edata = .;
- PROVIDE (edata = .);
-
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
+ . = ALIGN(32);
+#else
+ . = ALIGN(128);
#endif
+ .data.percpu : {
+ __per_cpu_start = .;
+ *(.data.percpu)
+ __per_cpu_end = .;
+ }
- /* will be freed after init */
- . = ALIGN(PAGE_SIZE);
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- *(.init.text)
- _einittext = .;
- }
-#ifdef CONFIG_PPC32
- /* .exit.text is discarded at runtime, not link time,
- to deal with references from __bug_table */
- .exit.text : { *(.exit.text) }
-#endif
- .init.data : {
- *(.init.data);
- __vtop_table_begin = .;
- *(.vtop_fixup);
- __vtop_table_end = .;
- __ptov_table_begin = .;
- *(.ptov_fixup);
- __ptov_table_end = .;
- }
-
- . = ALIGN(16);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
-
- .initcall.init : {
- __initcall_start = .;
- *(.initcall1.init)
- *(.initcall2.init)
- *(.initcall3.init)
- *(.initcall4.init)
- *(.initcall5.init)
- *(.initcall6.init)
- *(.initcall7.init)
- __initcall_end = .;
- }
-
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
-
- SECURITY_INIT
+ . = ALIGN(8);
+ .machine.desc : {
+ __machine_desc_start = . ;
+ *(.machine.desc)
+ __machine_desc_end = . ;
+ }
+
+ /* freed after init ends here */
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+
+/*
+ * And now the various read/write data
+ */
+
+ . = ALIGN(PAGE_SIZE);
+ _sdata = .;
#ifdef CONFIG_PPC32
- __start___ftr_fixup = .;
- __ftr_fixup : { *(__ftr_fixup) }
- __stop___ftr_fixup = .;
+ .data :
+ {
+ *(.data)
+ *(.sdata)
+ *(.got.plt) *(.got)
+ }
#else
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
+ .data : {
+ *(.data .data.rel* .toc1)
+ *(.branch_lt)
+ }
-#ifdef CONFIG_PPC32
- . = ALIGN(32);
+ .opd : {
+ *(.opd)
+ }
+
+ .got : {
+ __toc_start = .;
+ *(.got)
+ *(.toc)
+ }
#endif
- .data.percpu : {
- __per_cpu_start = .;
- *(.data.percpu)
- __per_cpu_end = .;
- }
- . = ALIGN(PAGE_SIZE);
-#ifdef CONFIG_PPC64
- . = ALIGN(16384);
- __init_end = .;
- /* freed after init ends here */
-
- /* Read/write sections */
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(16384);
- _sdata = .;
- /* The initial task and kernel stack */
- .data.init_task : {
- *(.data.init_task)
- }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
- *(.data.page_aligned)
- }
-
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
-
- .data : {
- *(.data .data.rel* .toc1)
- *(.branch_lt)
- }
-
- .opd : {
- *(.opd)
- }
-
- .got : {
- __toc_start = .;
- *(.got)
- *(.toc)
- . = ALIGN(PAGE_SIZE);
- _edata = .;
- }
-
- . = ALIGN(PAGE_SIZE);
+ . = ALIGN(PAGE_SIZE);
+ _edata = .;
+ PROVIDE32 (edata = .);
+
+ /* The initial task and kernel stack */
+#ifdef CONFIG_PPC32
+ . = ALIGN(8192);
#else
- __initramfs_start = .;
- .init.ramfs : {
- *(.init.ramfs)
- }
- __initramfs_end = .;
+ . = ALIGN(16384);
+#endif
+ .data.init_task : {
+ *(.data.init_task)
+ }
- . = ALIGN(4096);
- __init_end = .;
+ . = ALIGN(PAGE_SIZE);
+ .data.page_aligned : {
+ *(.data.page_aligned)
+ }
- . = ALIGN(4096);
- _sextratext = .;
- _eextratext = .;
+ .data.cacheline_aligned : {
+ *(.data.cacheline_aligned)
+ }
- __bss_start = .;
-#endif
+ . = ALIGN(PAGE_SIZE);
+ __data_nosave : {
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ }
- .bss : {
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- __bss_stop = .;
- }
+/*
+ * And finally the bss
+ */
+
+ .bss : {
+ __bss_start = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ __bss_stop = .;
+ }
-#ifdef CONFIG_PPC64
- . = ALIGN(PAGE_SIZE);
-#endif
- _end = . ;
-#ifdef CONFIG_PPC32
- PROVIDE (end = .);
-#endif
+ . = ALIGN(PAGE_SIZE);
+ _end = . ;
+ PROVIDE32 (end = .);
}
* normal insert callback here.
*/
#ifdef CONFIG_PPC_ISERIES
- if (_machine == PLATFORM_ISERIES_LPAR)
+ if (machine_is(iseries))
ret = iSeries_hpte_insert(hpteg, va,
paddr,
tmp_mode,
else
#endif
#ifdef CONFIG_PPC_PSERIES
- if (_machine & PLATFORM_LPAR)
+ if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR))
ret = pSeries_lpar_hpte_insert(hpteg, va,
paddr,
tmp_mode,
* Not in the device-tree, let's fallback on known size
* list for 16M capable GP & GR
*/
- if ((_machine != PLATFORM_ISERIES_LPAR) &&
- cpu_has_feature(CPU_FTR_16M_PAGE))
+ if (cpu_has_feature(CPU_FTR_16M_PAGE) && !machine_is(iseries))
memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
sizeof(mmu_psize_defaults_gp));
found:
}
-static int __init cell_probe(int platform)
+static int __init cell_probe(void)
{
- if (platform != PLATFORM_CELL)
+ /* XXX This is temporary, the Cell maintainer will come up with
+ * more appropriate detection logic
+ */
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "IBM,CPBW-1.0"))
return 0;
return 1;
return -ENODEV;
}
-struct machdep_calls __initdata cell_md = {
+define_machine(cell) {
+ .name = "Cell",
.probe = cell_probe,
.setup_arch = cell_setup_arch,
.init_early = cell_init_early,
pci_create_OF_bus_map();
+#ifdef CONFIG_SMP
+ smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+
/*
* Print the banner, then scroll down so boot progress
* can be printed. -- Cort
ppc_md.progress(" Have fun! ", 0x7777);
}
-void __init chrp_init(void)
+static int __init chrp_probe(void)
{
+ char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "device_type", NULL);
+ if (dtype == NULL)
+ return 0;
+ if (strcmp(dtype, "chrp"))
+ return 0;
+
ISA_DMA_THRESHOLD = ~0L;
DMA_MODE_READ = 0x44;
DMA_MODE_WRITE = 0x48;
void __init iSeries_init_IRQ(void) { }
#endif
-static int __init iseries_probe(int platform)
+static int __init iseries_probe(void)
{
- if (PLATFORM_ISERIES_LPAR != platform)
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "IBM,iSeries"))
return 0;
powerpc_firmware_features |= FW_FEATURE_ISERIES;
return 1;
}
-struct machdep_calls __initdata iseries_md = {
+define_machine(iseries) {
+ .name = "iSeries",
.setup_arch = iSeries_setup_arch,
.show_cpuinfo = iSeries_show_cpuinfo,
.init_IRQ = iSeries_init_IRQ,
/* /chosen */
dt_start_node(dt, "chosen");
- dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR);
dt_prop_str(dt, "bootargs", cmd_line);
if (cmd_mem_limit)
dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init maple_probe(int platform)
+static int __init maple_probe(void)
{
- if (platform != PLATFORM_MAPLE)
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "Momentum,Maple"))
return 0;
/*
* On U3, the DART (iommu) must be allocated now since it
return 1;
}
-struct machdep_calls __initdata maple_md = {
+define_machine(maple_md) {
+ .name = "Maple",
.probe = maple_probe,
.setup_arch = maple_setup_arch,
.init_early = maple_init_early,
static void __init bootx_add_chosen_props(unsigned long base,
unsigned long *mem_end)
{
- u32 val = _MACH_Pmac;
-
- bootx_dt_add_prop("linux,platform", &val, 4, mem_end);
+ u32 val;
if (bootx_info->kernelParamsOffset) {
char *args = (char *)((unsigned long)bootx_info) +
void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
preempt_disable();
pmac_early_vresume_proc = proc;
return 0;
i2c_inited = 1;
+ if (!machine_is(powermac))
+ return 0;
+
/* Probe keywest-i2c busses */
kw_i2c_probe();
}
#ifdef CONFIG_PPC32
- if (_machine == _MACH_chrp && nvram_naddrs == 1) {
+ if (machine_is(chrp) && nvram_naddrs == 1) {
nvram_data = ioremap(r1.start, s1);
nvram_mult = 1;
ppc_md.nvram_read_val = direct_nvram_read_byte;
#ifdef CONFIG_PPC32
void pmac_pci_fixup_cardbus(struct pci_dev* dev)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
/*
* Fix the interrupt routing on the various cardbus bridges
* On PowerMacs, we try to switch any PCI ATA controller to
* fully native mode
*/
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
+
/* Some controllers don't have the class IDE */
if (dev->vendor == PCI_VENDOR_ID_PROMISE)
switch(dev->device) {
return 0;
pfbase_inited = 1;
+ if (!machine_is(powermac))
+ return 0;
DBG("Installing base platform functions...\n");
smp_ops = &psurge_smp_ops;
#endif
#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_ADB
+ if (strstr(cmd_line, "adb_sync")) {
+ extern int __adb_probe_sync;
+ __adb_probe_sync = 1;
+ }
+#endif /* CONFIG_ADB */
}
char *bootpath;
pmac_power_off();
}
-#ifdef CONFIG_PPC32
-void __init pmac_init(void)
-{
- /* isa_io_base gets set in pmac_pci_init */
- isa_mem_base = PMAC_ISA_MEM_BASE;
- pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
- ISA_DMA_THRESHOLD = ~0L;
- DMA_MODE_READ = 1;
- DMA_MODE_WRITE = 2;
-
- ppc_md = pmac_md;
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
- ppc_ide_md.default_io_base = pmac_ide_get_base;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
-
- if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0);
-
-}
-#endif
-
/*
* Early initialization.
*/
{
struct device_node *np;
+ if (machine_is(chrp))
+ return -1;
+
+ if (!machine_is(powermac))
+ return 0;
+
np = of_find_node_by_name(NULL, "valkyrie");
if (np)
of_platform_device_create(np, "valkyrie", NULL);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init pmac_probe(int platform)
+static int __init pmac_probe(void)
{
-#ifdef CONFIG_PPC64
- if (platform != PLATFORM_POWERMAC)
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "Power Macintosh") &&
+ !of_flat_dt_is_compatible(root, "MacRISC"))
return 0;
+#ifdef CONFIG_PPC64
/*
* On U3, the DART (iommu) must be allocated now since it
* has an impact on htab_initialize (due to the large page it
alloc_dart_table();
#endif
+#ifdef CONFIG_PPC32
+ /* isa_io_base gets set in pmac_pci_init */
+ isa_mem_base = PMAC_ISA_MEM_BASE;
+ pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
+ ISA_DMA_THRESHOLD = ~0L;
+ DMA_MODE_READ = 1;
+ DMA_MODE_WRITE = 2;
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
+ ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
+ ppc_ide_md.default_io_base = pmac_ide_get_base;
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
+
+#endif /* CONFIG_PPC32 */
+
#ifdef CONFIG_PMAC_SMU
/*
* SMU based G5s need some memory below 2Gb, at least the current
}
#endif
-struct machdep_calls __initdata pmac_md = {
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
- .cpu_die = generic_mach_cpu_die,
-#endif
+define_machine(powermac) {
+ .name = "PowerMac",
.probe = pmac_probe,
.setup_arch = pmac_setup_arch,
.init_early = pmac_init_early,
.pcibios_after_init = pmac_pcibios_after_init,
.phys_mem_access_prot = pci_phys_mem_access_prot,
#endif
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
+ .cpu_die = generic_mach_cpu_die,
+#endif
};
*/
void __init pmac_calibrate_decr(void)
{
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && defined(CONFIG_ADB_PMU)
/* XXX why here? */
pmu_register_sleep_notifier(&time_sleep_notifier);
-#endif /* CONFIG_PM */
+#endif
generic_calibrate_decr();
{
struct proc_dir_entry *e;
- if (platform_is_pseries()) {
+ if (machine_is(pseries)) {
e = create_proc_entry("ppc64/eeh", 0, NULL);
if (e)
e->proc_fops = &proc_eeh_operations;
int i;
unsigned int reg;
- if (!platform_is_pseries())
+ if (!machine_is(pseries))
return;
printk("Using INTC for W82c105 IDE controller.\n");
#include <linux/pci.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
+#include <asm/firmware.h>
static struct pci_bus *
find_bus_among_children(struct pci_bus *bus,
#include <linux/proc_fs.h>
#include <asm/prom.h>
-#include <asm/pSeries_reconfig.h>
+#include <asm/machdep.h>
#include <asm/uaccess.h>
+#include <asm/pSeries_reconfig.h>
{
struct proc_dir_entry *ent;
- if (!platform_is_pseries())
+ if (!machine_is(pseries))
return 0;
ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL);
#include <asm/prom.h>
#include <asm/nvram.h>
#include <asm/atomic.h>
+#include <asm/machdep.h>
#if 0
#define DEBUG(A...) printk(KERN_ERR A)
{
struct proc_dir_entry *entry;
- if (!platform_is_pseries())
+ if (!machine_is(pseries))
return 0;
/* No RTAS */
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-extern struct machdep_calls pSeries_md;
-static int __init pSeries_probe(int platform)
+static int __init pSeries_probe_hypertas(unsigned long node,
+ const char *uname, int depth,
+ void *data)
{
- if (platform != PLATFORM_PSERIES &&
- platform != PLATFORM_PSERIES_LPAR)
+ if (depth != 1 ||
+ (strcmp(uname, "rtas") != 0 && strcmp(uname, "rtas@0") != 0))
+ return 0;
+
+ if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
+ powerpc_firmware_features |= FW_FEATURE_LPAR;
+
+ return 1;
+}
+
+static int __init pSeries_probe(void)
+{
+ char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "device_type", NULL);
+ if (dtype == NULL)
+ return 0;
+ if (strcmp(dtype, "chrp"))
return 0;
- /* if we have some ppc_md fixups for LPAR to do, do
- * it here ...
- */
+ DBG("pSeries detected, looking for LPAR capability...\n");
- if (platform == PLATFORM_PSERIES_LPAR)
- powerpc_firmware_features |= FW_FEATURE_LPAR;
+ /* Now try to figure out if we are running on LPAR */
+ of_scan_flat_dt(pSeries_probe_hypertas, NULL);
+
+ DBG("Machine is%s LPAR !\n",
+ (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
return 1;
}
+
DECLARE_PER_CPU(unsigned long, smt_snooze_delay);
static void pseries_dedicated_idle_sleep(void)
}
#endif
-struct machdep_calls __initdata pSeries_md = {
+define_machine(pseries) {
+ .name = "pSeries",
.probe = pSeries_probe,
.setup_arch = pSeries_setup_arch,
.init_early = pSeries_init_early,
static int __init
prep_request_io(void)
{
- if (_machine == _MACH_prep) {
#ifdef CONFIG_NVRAM
- request_region(PREP_NVRAM_AS0, 0x8, "nvram");
+ request_region(PREP_NVRAM_AS0, 0x8, "nvram");
#endif
- request_region(0x00,0x20,"dma1");
- request_region(0x40,0x20,"timer");
- request_region(0x80,0x10,"dma page reg");
- request_region(0xc0,0x20,"dma2");
- }
+ request_region(0x00,0x20,"dma1");
+ request_region(0x40,0x20,"timer");
+ request_region(0x80,0x10,"dma page reg");
+ request_region(0xc0,0x20,"dma2");
return 0;
}
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/nvram.h>
+#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
+#endif
#define NVRAM_SIZE 8192
case IOC_NVRAM_GET_OFFSET: {
int part, offset;
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return -EINVAL;
if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0)
return -EFAULT;
#if defined(CONFIG_PPC_CHRP) && defined(CONFIG_PPC32)
- if(_machine == _MACH_chrp && _chrp_type == _CHRP_Pegasos) {
+ if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) {
hwif->irq = hwif->channel ? 15 : 14;
}
#endif
void __init
pmac_ide_probe(void)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
#ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST
static int ohci1394_pci_resume (struct pci_dev *pdev)
{
#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct device_node *of_node;
/* Re-enable 1394 */
static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
{
#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct device_node *of_node;
/* Disable 1394 */
#include <asm/semaphore.h>
#ifdef CONFIG_PPC
#include <asm/prom.h>
+#include <asm/machdep.h>
#endif
int i;
#ifdef CONFIG_PPC32
- if ( (_machine != _MACH_chrp) && (_machine != _MACH_Pmac) )
+ if (!machine_is(chrp) && !machine_is(powermac))
return 0;
#endif
#ifdef CONFIG_MAC
static int __init adbhid_init(void)
{
#ifndef CONFIG_MAC
- if ( (_machine != _MACH_chrp) && (_machine != _MACH_Pmac) )
- return 0;
+ if (!machine_is(chrp) && !machine_is(powermac))
+ return 0;
#endif
led_request.complete = 1;
media_bays[i].cd_index = -1;
#endif
}
- if (_machine != _MACH_Pmac)
- return -ENODEV;
+ if (!machine_is(powermac))
+ return 0;
macio_register_driver(&media_bay_driver);
struct pci_dev *pdev;
int rc;
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return 0;
planb_devices = find_devices("planb");
** If the address starts with 00 a0, we have to bit-reverse
** each byte of the address.
*/
- if ( (_machine & _MACH_Pmac) &&
+ if ( machine_is(powermac) &&
(dev->dev_addr[0] == 0) &&
(dev->dev_addr[1] == 0xa0) )
{
static void set_mesh_power(struct mesh_state *ms, int state)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
if (state) {
pmac_call_feature(PMAC_FTR_MESH_ENABLE, macio_get_of_node(ms->mdev), 0, 1);
#ifdef CONFIG_PPC_PMAC
/* Disable ASIC clocks for USB */
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct device_node *of_node;
of_node = pci_device_to_OF_node (dev);
#ifdef CONFIG_PPC_PMAC
/* Reenable ASIC clocks for USB */
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct device_node *of_node;
of_node = pci_device_to_OF_node (dev);
#include <asm/io.h>
#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
var = default_var;
#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
/* Indicate sleep capability */
if (par->chip_gen == rage_M3) {
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
return 0;
#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && blank)
+ if (machine_is(powermac) && blank)
set_backlight_enable(0);
#endif /* CONFIG_PMAC_BACKLIGHT */
aty128_set_lcd_enable(par, par->lcd_on && !blank);
}
#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && !blank)
+ if (machine_is(powermac) && !blank)
set_backlight_enable(1);
#endif /* CONFIG_PMAC_BACKLIGHT */
return 0;
#include "ati_ids.h"
#ifdef __powerpc__
+#include <asm/machdep.h>
#include <asm/prom.h>
#include "../macmodes.h"
#endif
memset(&var, 0, sizeof(var));
#ifdef CONFIG_PPC
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
/*
* FIXME: The NVRAM stuff should be put in a Mac-specific file, as it
* applies to all Mac video cards
return 0;
#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && blank > FB_BLANK_NORMAL)
+ if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
set_backlight_enable(0);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank > FB_BLANK_NORMAL &&
aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && blank <= FB_BLANK_NORMAL)
+ if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
set_backlight_enable(1);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
#include <linux/agp_backend.h>
#ifdef CONFIG_PPC_PMAC
-#include <asm/processor.h>
+#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/pmac_feature.h>
#endif
rinfo->pm_mode |= radeon_pm_off;
}
#if defined(CONFIG_PPC_PMAC)
- if (_machine == _MACH_Pmac && rinfo->of_node) {
+ if (machine_is(powermac) && rinfo->of_node) {
if (rinfo->is_mobility && rinfo->pm_reg &&
rinfo->family <= CHIP_FAMILY_RV250)
rinfo->pm_mode |= radeon_pm_d2;
#include <asm/amigahw.h>
#endif
#ifdef CONFIG_PPC_PREP
-#include <asm/processor.h>
-#define isPReP (_machine == _MACH_prep)
+#include <asm/machdep.h>
+#define isPReP (machine_is(prep))
#else
#define isPReP 0
#endif
#include <asm/uaccess.h>
#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
unsigned char nvram_read_byte(int);
static int default_vmode = VMODE_NVRAM;
static int default_cmode = CMODE_NVRAM;
/* FIXME: Where to move this?! */
#if defined(CONFIG_PPC_PMAC)
#ifndef MODULE
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct fb_var_screeninfo var;
if (default_vmode <= 0 || default_vmode > VMODE_MAX)
default_vmode = VMODE_640_480_60;
#include <asm/pci-bridge.h>
#endif
#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/machdep.h>
#include <asm/backlight.h>
#endif
NVWriteCrtc(par, 0x1a, vesa);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (par->FlatPanel && _machine == _MACH_Pmac) {
+ if (par->FlatPanel && machine_is(powermac)) {
set_backlight_enable(!blank);
}
#endif
info->fix.id,
par->FbMapSize / (1024 * 1024), info->fix.smem_start);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (par->FlatPanel && _machine == _MACH_Pmac)
+ if (par->FlatPanel && machine_is(powermac))
register_backlight_controller(&nvidia_backlight_controller,
par, "mnca");
#endif
return 0;
#ifdef CONFIG_PMAC_BACKLIGHT
- if (rinfo->dviDisp_type == MT_LCD && _machine == _MACH_Pmac) {
+ if (rinfo->dviDisp_type == MT_LCD && machine_is(powermac)) {
set_backlight_enable(!blank);
return 0;
}
#include <asm/pci-bridge.h>
#endif
#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/machdep.h>
#include <asm/backlight.h>
#endif
CRTCout(par, 0x1a, vesa);
#ifdef CONFIG_PMAC_BACKLIGHT
- if ( par->FlatPanel && _machine == _MACH_Pmac) {
+ if ( par->FlatPanel && machine_is(powermac)) {
set_backlight_enable(!blank);
}
#endif
info->fix.smem_len / (1024 * 1024),
info->fix.smem_start);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (default_par->FlatPanel && _machine == _MACH_Pmac)
- register_backlight_controller(&riva_backlight_controller,
- default_par, "mnca");
+ if (default_par->FlatPanel && machine_is(powermac))
+ register_backlight_controller(&riva_backlight_controller,
+ default_par, "mnca");
#endif
NVTRACE_LEAVE();
return 0;
#include "mac.h"
#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
extern void note_bootable_part(dev_t dev, int part, int goodness);
#endif
* If this is the first bootable partition, tell the
* setup code, in case it wants to make this the root.
*/
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
int goodness = 0;
mac_fix_string(part->processor, 16);
#endif
struct machdep_calls {
+ char *name;
#ifdef CONFIG_PPC64
void (*hpte_invalidate)(unsigned long slot,
unsigned long va,
void (*iommu_dev_setup)(struct pci_dev *dev);
void (*iommu_bus_setup)(struct pci_bus *bus);
void (*irq_bus_setup)(struct pci_bus *bus);
-#endif
+#endif /* CONFIG_PPC64 */
- int (*probe)(int platform);
+ int (*probe)(void);
void (*setup_arch)(void);
void (*init_early)(void);
/* Optional, may be NULL. */
/* Called at then very end of pcibios_init() */
void (*pcibios_after_init)(void);
- /* this is for modules, since _machine can be a define -- Cort */
- int ppc_machine;
#endif /* CONFIG_PPC32 */
/* Called to shutdown machine specific hardware not already controlled
extern void power4_idle(void);
extern void ppc6xx_idle(void);
+/*
+ * ppc_md contains a copy of the machine description structure for the
+ * current platform. machine_id contains the initial address where the
+ * description was found during boot.
+ */
extern struct machdep_calls ppc_md;
+extern struct machdep_calls *machine_id;
+
+#define __machine_desc __attribute__ ((__section__ (".machine.desc")))
+
+#define define_machine(name) struct machdep_calls mach_##name __machine_desc =
+#define machine_is(name) \
+ ({ \
+ extern struct machdep_calls mach_##name \
+ __attribute__((weak)); \
+ machine_id == &mach_##name; \
+ })
+
+extern void probe_machine(void);
+
extern char cmd_line[COMMAND_LINE_SIZE];
#ifdef CONFIG_PPC_PMAC
extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
extern void pmac_call_early_video_resume(void);
-#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x))
+#define PMAC_FTR_DEF(x) ((0x6660000) | (x))
/* The AGP driver registers itself here */
extern void pmac_register_agp_pm(struct pci_dev *bridge,
* -- BenH.
*/
-/* Platforms codes (to be obsoleted) */
-#define PLATFORM_PSERIES 0x0100
-#define PLATFORM_PSERIES_LPAR 0x0101
-#define PLATFORM_ISERIES_LPAR 0x0201
-#define PLATFORM_LPAR 0x0001
-#define PLATFORM_POWERMAC 0x0400
-#define PLATFORM_MAPLE 0x0500
-#define PLATFORM_PREP 0x0600
-#define PLATFORM_CHRP 0x0700
-#define PLATFORM_CELL 0x1000
-
-/* Compat platform codes for 32 bits */
-#define _MACH_prep PLATFORM_PREP
-#define _MACH_Pmac PLATFORM_POWERMAC
-#define _MACH_chrp PLATFORM_CHRP
-
/* PREP sub-platform types see residual.h for these */
#define _PREP_Motorola 0x01 /* motorola prep */
#define _PREP_Firm 0x02 /* firmworks prep */
#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */
#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */
-#ifdef __KERNEL__
-#define platform_is_pseries() (_machine == PLATFORM_PSERIES || \
- _machine == PLATFORM_PSERIES_LPAR)
+#if defined(__KERNEL__) && defined(CONFIG_PPC32)
+
+extern int _chrp_type;
#ifdef CONFIG_PPC_PREP
/* what kind of prep workstation we are */
extern int _prep_type;
-extern int _chrp_type;
/*
* This is used to identify the board type from a given PReP board
#endif /* CONFIG_PPC_PREP */
-#if defined(CONFIG_PPC_MULTIPLATFORM)
-extern int _machine;
-
-#elif defined(CONFIG_PPC_ISERIES)
-/*
- * iSeries is soon to become MULTIPLATFORM hopefully ...
- */
-#define _machine PLATFORM_ISERIES_LPAR
-#else
+#ifndef CONFIG_PPC_MULTIPLATFORM
#define _machine 0
#endif /* CONFIG_PPC_MULTIPLATFORM */
-#endif /* __KERNEL__ */
+
+#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
+
/*
* Default implementation of macro that returns current
* instruction pointer ("program counter").
extern void of_node_put(struct device_node *node);
/* For scanning the flat device-tree at boot time */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
- const char *uname, int depth,
- void *data),
- void *data);
-void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
- unsigned long *size);
+extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
+ const char *uname, int depth,
+ void *data),
+ void *data);
+extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size);
+extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long __init of_get_flat_dt_root(void);
/* For updating the device tree at runtime */
extern void of_attach_node(struct device_node *);
__u32 minor; /* Minor number 0x14 */
} version;
+ /* Note about the platform flags: it now only contains the lpar
+ * bit. The actual platform number is dead and burried
+ */
__u32 platform; /* Platform flags 0x18 */
__u32 processor; /* Processor type 0x1C */
__u64 processorCount; /* # of physical processors 0x20 */
struct seq_file;
struct file;
+/*
+ * This is for compatibility with ARCH=powerpc.
+ */
+#define machine_is(x) __MACHINE_IS_##x
+#define __MACHINE_IS_powermac 0
+#define __MACHINE_IS_chrp 0
+#ifdef CONFIG_PPC_PREP
+#define __MACHINE_IS_prep 1
+#else
+#define __MACHINE_IS_prep 0
+#endif
+
/* We export this macro for external modules like Alsa to know if
* ppc_md.feature_call is implemented or not
*/
struct device_node *io = NULL, *info = NULL;
int vol, res;
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return -ENODEV;
awacs_subframe = 0;
u32 layout_id = 0;
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return -ENODEV;
chip->subframe = 0;
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff