UHCI: short control URBs get a status stage
authorAlan Stern <stern@rowland.harvard.edu>
Fri, 13 Jul 2007 19:46:29 +0000 (15:46 -0400)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 20 Jul 2007 00:46:04 +0000 (17:46 -0700)
It has recently been pointed out that short control transfers should
have a status stage, even if they generate an error because
URB_SHORT_NOT_OK was set.  This patch (as935) changes uhci-hcd to
enable the status stage when this happens.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/uhci-q.c

index 4aed305982ec3f8b1c9e90cce2b7b1e0885fe5c4..3bb908ca38e9c91ffd59df6e148608d23ab2d8f9 100644 (file)
@@ -827,8 +827,10 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
         * If direction is "send", change the packet ID from SETUP (0x2D)
         * to OUT (0xE1).  Else change it from SETUP to IN (0x69) and
         * set Short Packet Detect (SPD) for all data packets.
+        *
+        * 0-length transfers always get treated as "send".
         */
-       if (usb_pipeout(urb->pipe))
+       if (usb_pipeout(urb->pipe) || len == 0)
                destination ^= (USB_PID_SETUP ^ USB_PID_OUT);
        else {
                destination ^= (USB_PID_SETUP ^ USB_PID_IN);
@@ -839,7 +841,12 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
         * Build the DATA TDs
         */
        while (len > 0) {
-               int pktsze = min(len, maxsze);
+               int pktsze = maxsze;
+
+               if (len <= pktsze) {            /* The last data packet */
+                       pktsze = len;
+                       status &= ~TD_CTRL_SPD;
+               }
 
                td = uhci_alloc_td(uhci);
                if (!td)
@@ -866,20 +873,10 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
                goto nomem;
        *plink = LINK_TO_TD(td);
 
-       /*
-        * It's IN if the pipe is an output pipe or we're not expecting
-        * data back.
-        */
-       destination &= ~TD_TOKEN_PID_MASK;
-       if (usb_pipeout(urb->pipe) || !urb->transfer_buffer_length)
-               destination |= USB_PID_IN;
-       else
-               destination |= USB_PID_OUT;
-
+       /* Change direction for the status transaction */
+       destination ^= (USB_PID_IN ^ USB_PID_OUT);
        destination |= TD_TOKEN_TOGGLE;         /* End in Data1 */
 
-       status &= ~TD_CTRL_SPD;
-
        uhci_add_td_to_urbp(td, urbp);
        uhci_fill_td(td, status | TD_CTRL_IOC,
                        destination | uhci_explen(0), 0);
@@ -1185,10 +1182,18 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb)
                                }
                        }
 
+               /* Did we receive a short packet? */
                } else if (len < uhci_expected_length(td_token(td))) {
 
-                       /* We received a short packet */
-                       if (urb->transfer_flags & URB_SHORT_NOT_OK)
+                       /* For control transfers, go to the status TD if
+                        * this isn't already the last data TD */
+                       if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
+                               if (td->list.next != urbp->td_list.prev)
+                                       ret = 1;
+                       }
+
+                       /* For bulk and interrupt, this may be an error */
+                       else if (urb->transfer_flags & URB_SHORT_NOT_OK)
                                ret = -EREMOTEIO;
 
                        /* Fixup needed only if this isn't the URB's last TD */
@@ -1208,10 +1213,6 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb)
 
 err:
        if (ret < 0) {
-               /* In case a control transfer gets an error
-                * during the setup stage */
-               urb->actual_length = max(urb->actual_length, 0);
-
                /* Note that the queue has stopped and save
                 * the next toggle value */
                qh->element = UHCI_PTR_TERM;
@@ -1489,9 +1490,25 @@ __acquires(uhci->lock)
 {
        struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
 
+       if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
+
+               /* urb->actual_length < 0 means the setup transaction didn't
+                * complete successfully.  Either it failed or the URB was
+                * unlinked first.  Regardless, don't confuse people with a
+                * negative length. */
+               urb->actual_length = max(urb->actual_length, 0);
+
+               /* Report erroneous short transfers */
+               if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+                               urb->actual_length <
+                                       urb->transfer_buffer_length &&
+                               urb->status == 0))
+                       urb->status = -EREMOTEIO;
+       }
+
        /* When giving back the first URB in an Isochronous queue,
         * reinitialize the QH's iso-related members for the next URB. */
-       if (qh->type == USB_ENDPOINT_XFER_ISOC &&
+       else if (qh->type == USB_ENDPOINT_XFER_ISOC &&
                        urbp->node.prev == &qh->queue &&
                        urbp->node.next != &qh->queue) {
                struct urb *nurb = list_entry(urbp->node.next,