sh: kfr2r09 board support - SCIF console

This patch adds basic kfr2r09 board support. Only
the SCIF1 console is supported with this patch, but
this patch and a proper sh7724 configuration is all
that is needed. Combine with an initramfs to have a
small RAM based kernel and distribution booted as
zImage from RAM via JTAG.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 75d049b03f7e04231de0525ba6b57e3779fe2984..d7358d70f1540a2b7429c01fe99a0abcfd0a9e7c 100644 (file)
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -136,6 +136,7 @@ machdir-$(CONFIG_SH_7751_SYSTEMH)           += mach-systemh
 machdir-$(CONFIG_SH_EDOSK7705)                 += mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)                        += mach-highlander
 machdir-$(CONFIG_SH_MIGOR)                     += mach-migor
+machdir-$(CONFIG_SH_KFR2R09)                   += mach-kfr2r09
 machdir-$(CONFIG_SH_SDK7780)                   += mach-sdk7780
 machdir-$(CONFIG_SH_X3PROTO)                   += mach-x3proto
 machdir-$(CONFIG_SH_SH7763RDP)                 += mach-sh7763rdp

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 2b1af0eefa6ab9d693fbc68819f28a5ce777316c..db04c85971ad57e9b219c158cd7a644c0fcafd1c 100644 (file)
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -193,6 +193,13 @@ config SH_AP325RXA
          Renesas "AP-325RXA" support.
          Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
 
+config SH_KFR2R09
+       bool "KFR2R09"
+       depends on CPU_SUBTYPE_SH7724
+       select ARCH_REQUIRE_GPIOLIB
+       help
+         "Kit For R2R for 2009" support.
+
 config SH_SH7763RDP
        bool "SH7763RDP"
        depends on CPU_SUBTYPE_SH7763

diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
new file mode 100644 (file)
index 0000000..7703756
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -0,0 +1 @@
+obj-y   := setup.o

diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
new file mode 100644 (file)
index 0000000..224318a
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -0,0 +1,48 @@
+/*
+ * KFR2R09 board support code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <cpu/sh7724.h>
+
+static int __init kfr2r09_devices_setup(void)
+{
+       /* enable SCIF1 serial port for YC401 console support */
+       gpio_request(GPIO_FN_SCIF1_RXD, NULL);
+       gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+
+       return 0;
+}
+device_initcall(kfr2r09_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int kfr2r09_mode_pins(void)
+{
+       /* MD0=1, MD1=1, MD2=0: Clock Mode 3
+        * MD3=0: 16-bit Area0 Bus Width
+        * MD5=1: Little Endian
+        * MD8=1: Test Mode Disabled
+        */
+       return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_kfr2r09 __initmv = {
+       .mv_name                = "kfr2r09",
+       .mv_mode_pins           = kfr2r09_mode_pins,
+};