[PATCH] Serial: Disable OX950 transmitter for flow control
authorRussell King <rmk@dyn-67.arm.linux.org.uk>
Wed, 29 Jun 2005 17:41:51 +0000 (18:41 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Wed, 29 Jun 2005 17:41:51 +0000 (18:41 +0100)
Disable the transmitter whenever we want to prevent characters
being transmitted by flow control.  However, if we run out of
characters to send and want to only disable the TX interrupt,
allow that scenario.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
drivers/serial/8250.c

index b53b53bb1475b7954406d4a4bc5d0c7203a0621e..429994d5bc8b0cef40929ab7e6621c42520902d1 100644 (file)
@@ -993,21 +993,24 @@ static void autoconfig_irq(struct uart_8250_port *up)
        up->port.irq = (irq > 0) ? irq : 0;
 }
 
+static inline void __stop_tx(struct uart_8250_port *p)
+{
+       if (p->ier & UART_IER_THRI) {
+               p->ier &= ~UART_IER_THRI;
+               serial_out(p, UART_IER, p->ier);
+       }
+}
+
 static void serial8250_stop_tx(struct uart_port *port, unsigned int tty_stop)
 {
        struct uart_8250_port *up = (struct uart_8250_port *)port;
 
-       if (up->ier & UART_IER_THRI) {
-               up->ier &= ~UART_IER_THRI;
-               serial_out(up, UART_IER, up->ier);
-       }
+       __stop_tx(up);
 
        /*
-        * We only do this from uart_stop - if we run out of
-        * characters to send, we don't want to prevent the
-        * FIFO from emptying.
+        * We really want to stop the transmitter from sending.
         */
-       if (up->port.type == PORT_16C950 && tty_stop) {
+       if (up->port.type == PORT_16C950) {
                up->acr |= UART_ACR_TXDIS;
                serial_icr_write(up, UART_ACR, up->acr);
        }
@@ -1031,10 +1034,11 @@ static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start)
                                transmit_chars(up);
                }
        }
+
        /*
-        * We only do this from uart_start
+        * Re-enable the transmitter if we disabled it.
         */
-       if (tty_start && up->port.type == PORT_16C950) {
+       if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
                up->acr &= ~UART_ACR_TXDIS;
                serial_icr_write(up, UART_ACR, up->acr);
        }
@@ -1155,7 +1159,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up)
                return;
        }
        if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-               serial8250_stop_tx(&up->port, 0);
+               __stop_tx(up);
                return;
        }
 
@@ -1174,7 +1178,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up)
        DEBUG_INTR("THRE...");
 
        if (uart_circ_empty(xmit))
-               serial8250_stop_tx(&up->port, 0);
+               __stop_tx(up);
 }
 
 static _INLINE_ void check_modem_status(struct uart_8250_port *up)