if (memcmp(eth->h_dest, net->dev_addr, net->addr_len))
skb->pkt_type = PACKET_OTHERHOST;
}
- if (ntohs(eth->h_proto) >= 1536) {
+ if (ntohs(eth->h_proto) >= ETH_P_802_3_MIN) {
protocol = eth->h_proto;
} else {
rawp = (u16 *)skb->data;
if (memcmp(eth->h_dest, dev->dev_addr, ETH_ALEN))
skb->pkt_type = PACKET_OTHERHOST;
}
- if (ntohs(eth->h_proto) >= 1536)
+ if (ntohs(eth->h_proto) >= ETH_P_802_3_MIN)
return eth->h_proto;
rawp = skb->data;
skb->pkt_type=PACKET_MULTICAST;
}
- if (ntohs(eth->h_proto) >= 1536)
+ if (ntohs(eth->h_proto) >= ETH_P_802_3_MIN)
return eth->h_proto;
rawp = skb->data;
static int ule_bridged_sndu( struct dvb_net_priv *p )
{
struct ethhdr *hdr = (struct ethhdr*) p->ule_next_hdr;
- if(ntohs(hdr->h_proto) < 1536) {
+ if(ntohs(hdr->h_proto) < ETH_P_802_3_MIN) {
int framelen = p->ule_sndu_len - ((p->ule_next_hdr+sizeof(struct ethhdr)) - p->ule_skb->data);
- /* A frame Type < 1536 for a bridged frame, introduces a LLC Length field. */
+ /* A frame Type < ETH_P_802_3_MIN for a bridged frame, introduces a LLC Length field. */
if(framelen != ntohs(hdr->h_proto)) {
return -1;
}
(int) p->ule_sndu_type, l, total_ext_len);
#endif
- } while (p->ule_sndu_type < 1536);
+ } while (p->ule_sndu_type < ETH_P_802_3_MIN);
return total_ext_len;
}
}
/* Handle ULE Extension Headers. */
- if (priv->ule_sndu_type < 1536) {
+ if (priv->ule_sndu_type < ETH_P_802_3_MIN) {
/* There is an extension header. Handle it accordingly. */
int l = handle_ule_extensions(priv);
if (l < 0) {
(len << TXHDR_LEN_SHIFT) |
((l3off / 2) << TXHDR_L3START_SHIFT) |
(ihl << TXHDR_IHL_SHIFT) |
- ((eth_proto_inner < 1536) ? TXHDR_LLC : 0) |
+ ((eth_proto_inner < ETH_P_802_3_MIN) ? TXHDR_LLC : 0) |
((eth_proto == ETH_P_8021Q) ? TXHDR_VLAN : 0) |
(ipv6 ? TXHDR_IP_VER : 0) |
csum_bits);
* so don't forget to remove it.
*/
- if (ntohs(eth->h_proto) >= 1536)
+ if (ntohs(eth->h_proto) >= ETH_P_802_3_MIN)
return eth->h_proto;
rawp = skb->data;
unsigned char *data, int len)
{
__be16 proto = ((struct ethhdr *)data)->h_proto;
- if (ntohs(proto) >= 1536) { /* DIX II ethernet frame */
+ if (ntohs(proto) >= ETH_P_802_3_MIN) { /* DIX II ethernet frame */
pr_debug("ray_cs translate_frame DIX II\n");
/* Copy LLC header to card buffer */
memcpy_toio(&ptx->var, eth2_llc, sizeof(eth2_llc));
*/
proto = vhdr->h_vlan_encapsulated_proto;
- if (ntohs(proto) >= 1536) {
+ if (ntohs(proto) >= ETH_P_802_3_MIN) {
skb->protocol = proto;
return;
}
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less than this value
+ * then the frame is Ethernet II. Else it is 802.3 */
+
/*
* Non DIX types. Won't clash for 1500 types.
*/
* field in h_type field. Data follows immediately after header.
* 2. LLC Data frames whose total length, including LLC field and data,
* but not padding required to meet the minimum data frame length,
- * is less than 1536(0x0600) MUST be encoded by placing that length
+ * is less than ETH_P_802_3_MIN MUST be encoded by placing that length
* in the h_type field. The LLC field follows header immediately.
* 3. LLC data frames longer than this maximum MUST be encoded by placing
* the value 0 in the h_type field.
struct ethhdr *eh = (void *) skb->data;
u16 proto = ntohs(eh->h_proto);
- if (proto >= 1536)
+ if (proto >= ETH_P_802_3_MIN)
return proto;
if (get_unaligned((__be16 *) skb->data) == htons(0xFFFF))
ethproto = h->h_proto;
if (e->bitmask & EBT_802_3) {
- if (FWINV2(ntohs(ethproto) >= 1536, EBT_IPROTO))
+ if (FWINV2(ntohs(ethproto) >= ETH_P_802_3_MIN, EBT_IPROTO))
return 1;
} else if (!(e->bitmask & EBT_NOPROTO) &&
FWINV2(e->ethproto != ethproto, EBT_IPROTO))
if (netdev_uses_trailer_tags(dev))
return htons(ETH_P_TRAILER);
- if (ntohs(eth->h_proto) >= 1536)
+ if (ntohs(eth->h_proto) >= ETH_P_802_3_MIN)
return eth->h_proto;
/*
encaps_data = bridge_tunnel_header;
encaps_len = sizeof(bridge_tunnel_header);
skip_header_bytes -= 2;
- } else if (ethertype >= 0x600) {
+ } else if (ethertype >= ETH_P_802_3_MIN) {
encaps_data = rfc1042_header;
encaps_len = sizeof(rfc1042_header);
skip_header_bytes -= 2;
/* Normally, setting the skb 'protocol' field would be handled by a
* call to eth_type_trans(), but it assumes there's a sending
* device, which we may not have. */
- if (ntohs(eth->h_proto) >= 1536)
+ if (ntohs(eth->h_proto) >= ETH_P_802_3_MIN)
packet->protocol = eth->h_proto;
else
packet->protocol = htons(ETH_P_802_2);
proto = *(__be16 *) skb->data;
__skb_pull(skb, sizeof(__be16));
- if (ntohs(proto) >= 1536)
+ if (ntohs(proto) >= ETH_P_802_3_MIN)
return proto;
if (skb->len < sizeof(struct llc_snap_hdr))
__skb_pull(skb, sizeof(struct llc_snap_hdr));
- if (ntohs(llc->ethertype) >= 1536)
+ if (ntohs(llc->ethertype) >= ETH_P_802_3_MIN)
return llc->ethertype;
return htons(ETH_P_802_2);
if (attrs & (1 << OVS_KEY_ATTR_ETHERTYPE)) {
swkey->eth.type = nla_get_be16(a[OVS_KEY_ATTR_ETHERTYPE]);
- if (ntohs(swkey->eth.type) < 1536)
+ if (ntohs(swkey->eth.type) < ETH_P_802_3_MIN)
return -EINVAL;
attrs &= ~(1 << OVS_KEY_ATTR_ETHERTYPE);
} else {
encaps_data = bridge_tunnel_header;
encaps_len = sizeof(bridge_tunnel_header);
skip_header_bytes -= 2;
- } else if (ethertype > 0x600) {
+ } else if (ethertype >= ETH_P_802_3_MIN) {
encaps_data = rfc1042_header;
encaps_len = sizeof(rfc1042_header);
skip_header_bytes -= 2;