ath10k: don't consume other's shared interrupts

ath10k assumed all interrupts were directed to it.
This isn't the case for legacy shared interrupts.
ath10k consumed interrupts for other devices.

Check device irq status and return IRQ_NONE when
appropriate.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 8aeb46d9b53409da2ced923d49780b763105a5d6..9535eaa09f099b1ed8c7469ffe73f87236e3a9f3 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -269,6 +269,7 @@ enum ath10k_mcast2ucast_mode {
 #define CORE_CTRL_CPU_INTR_MASK                        0x00002000
 #define CORE_CTRL_ADDRESS                      0x0000
 #define PCIE_INTR_ENABLE_ADDRESS               0x0008
+#define PCIE_INTR_CAUSE_ADDRESS                        0x000c
 #define PCIE_INTR_CLR_ADDRESS                  0x0014
 #define SCRATCH_3_ADDRESS                      0x0030
 

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 2457c8ba9017327df49217d0a9e41508d716f058..12fb12ea2182c6599d0be7404754dde24672d54f 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -201,6 +201,19 @@ static const struct ce_pipe_config target_ce_config_wlan[] = {
        /* CE7 used only by Host */
 };
 
+static bool ath10k_pci_irq_pending(struct ath10k *ar)
+{
+       u32 cause;
+
+       /* Check if the shared legacy irq is for us */
+       cause = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+                                 PCIE_INTR_CAUSE_ADDRESS);
+       if (cause & (PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL))
+               return true;
+
+       return false;
+}
+
 /*
  * Diagnostic read/write access is provided for startup/config/debug usage.
  * Caller must guarantee proper alignment, when applicable, and single user
@@ -2086,6 +2099,9 @@ static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg)
        struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
        if (ar_pci->num_msi_intrs == 0) {
+               if (!ath10k_pci_irq_pending(ar))
+                       return IRQ_NONE;
+
                /*
                 * IMPORTANT: INTR_CLR regiser has to be set after
                 * INTR_ENABLE is set to 0, otherwise interrupt can not be